From eb3809dbc7f904cfa4447e64b3ed8fc5d1376968 Mon Sep 17 00:00:00 2001
From: mattkae <mattkae@protonmail.com>
Date: Sat, 28 May 2022 18:18:07 -0400
Subject: Initial commit

---
 .config/i3/.i3status.conf    |  84 +++++++++++++++++
 .config/i3/.i3status.conf~   |  84 +++++++++++++++++
 .config/i3/config            | 218 +++++++++++++++++++++++++++++++++++++++++++
 .config/i3/config~           | 218 +++++++++++++++++++++++++++++++++++++++++++
 .config/i3/run_i3_status.sh  |   9 ++
 .config/i3/run_i3_status.sh~ |   8 ++
 .config/i3/workspace-1.json  |  59 ++++++++++++
 .config/i3/workspace-1.json~ |  82 ++++++++++++++++
 8 files changed, 762 insertions(+)
 create mode 100644 .config/i3/.i3status.conf
 create mode 100644 .config/i3/.i3status.conf~
 create mode 100644 .config/i3/config
 create mode 100644 .config/i3/config~
 create mode 100755 .config/i3/run_i3_status.sh
 create mode 100644 .config/i3/run_i3_status.sh~
 create mode 100644 .config/i3/workspace-1.json
 create mode 100644 .config/i3/workspace-1.json~

(limited to '.config')

diff --git a/.config/i3/.i3status.conf b/.config/i3/.i3status.conf
new file mode 100644
index 0000000..9f8b6e7
--- /dev/null
+++ b/.config/i3/.i3status.conf
@@ -0,0 +1,84 @@
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+
+        colors = true
+        color_good = "#a3be8c"
+        color_bad = "#bf616a"
+        color_degraded = "#d08770"
+        output_format = "i3bar"
+        interval = 1
+}
+
+#order += "disk /home"
+order += "volume master"
+order += "cpu_usage 0"
+#order += "cpu_temperature 0"
+#order += "ipv6"
+#order += "run_watch DHCP"
+#order += "run_watch VPN"
+#order += "wireless wlan0"
+#order += "ethernet eth0"
+order += "battery 0"
+#order += "load"
+order += "tztime local"
+
+wireless wlan0 {
+        format_up = "W: (%quality at %essid, %bitrate) %ip"
+        format_down = "W: down"
+}
+
+ethernet eth0 {
+        # if you use %speed, i3status requires root privileges
+        format_up = "E: %ip"
+        format_down = "E: down"
+}
+
+battery 0 {
+        format = "🔋 %status %percentage"
+        last_full_capacity = true
+        low_threshold = 10
+}
+
+cpu_usage {
+		format = "💻 CPU %usage"
+}
+
+run_watch DHCP {
+        pidfile = "/var/run/dhclient*.pid"
+}
+
+run_watch VPN {
+        pidfile = "/var/run/vpnc/pid"
+}
+
+tztime local {
+        format = "📅 %A %D ⏰ %H:%M:%S"
+}
+
+load {
+        format = "%1min"
+}
+
+disk "/home" {
+        format = "|Home:%free"
+}
+
+cpu_temperature 0 {
+        format ="T:%degrees°C"
+	    max_threshold = 65
+        path = "/sys/devices/platform/coretemp.0/hwmon/hwmon0/temp1_input"
+}
+
+volume master {
+    format = "🎶 %volume"
+	  device = "default"
+	  mixer = "Master"
+	  mixer_idx = 0
+}
\ No newline at end of file
diff --git a/.config/i3/.i3status.conf~ b/.config/i3/.i3status.conf~
new file mode 100644
index 0000000..9f8b6e7
--- /dev/null
+++ b/.config/i3/.i3status.conf~
@@ -0,0 +1,84 @@
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+
+        colors = true
+        color_good = "#a3be8c"
+        color_bad = "#bf616a"
+        color_degraded = "#d08770"
+        output_format = "i3bar"
+        interval = 1
+}
+
+#order += "disk /home"
+order += "volume master"
+order += "cpu_usage 0"
+#order += "cpu_temperature 0"
+#order += "ipv6"
+#order += "run_watch DHCP"
+#order += "run_watch VPN"
+#order += "wireless wlan0"
+#order += "ethernet eth0"
+order += "battery 0"
+#order += "load"
+order += "tztime local"
+
+wireless wlan0 {
+        format_up = "W: (%quality at %essid, %bitrate) %ip"
+        format_down = "W: down"
+}
+
+ethernet eth0 {
+        # if you use %speed, i3status requires root privileges
+        format_up = "E: %ip"
+        format_down = "E: down"
+}
+
+battery 0 {
+        format = "🔋 %status %percentage"
+        last_full_capacity = true
+        low_threshold = 10
+}
+
+cpu_usage {
+		format = "💻 CPU %usage"
+}
+
+run_watch DHCP {
+        pidfile = "/var/run/dhclient*.pid"
+}
+
+run_watch VPN {
+        pidfile = "/var/run/vpnc/pid"
+}
+
+tztime local {
+        format = "📅 %A %D ⏰ %H:%M:%S"
+}
+
+load {
+        format = "%1min"
+}
+
+disk "/home" {
+        format = "|Home:%free"
+}
+
+cpu_temperature 0 {
+        format ="T:%degrees°C"
+	    max_threshold = 65
+        path = "/sys/devices/platform/coretemp.0/hwmon/hwmon0/temp1_input"
+}
+
+volume master {
+    format = "🎶 %volume"
+	  device = "default"
+	  mixer = "Master"
+	  mixer_idx = 0
+}
\ No newline at end of file
diff --git a/.config/i3/config b/.config/i3/config
new file mode 100644
index 0000000..2ca8834
--- /dev/null
+++ b/.config/i3/config
@@ -0,0 +1,218 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+#font pango:monospace 10
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango:DejaVu Sans Mono 10
+
+# The combination of xss-lock, nm-applet and pactl is a popular choice, so
+# they are included here as an example. Modify as you see fit.
+
+# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
+
+# NetworkManager is the most popular way to manage wireless networks on Linux,
+# and nm-applet is a desktop environment-independent system tray GUI for it.
+exec --no-startup-id nm-applet
+
+# Use pactl to adjust volume in PulseAudio.
+set $refresh_i3status killall -SIGUSR1 i3status
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +5% && $refresh_i3status
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -5% && $refresh_i3status
+bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
+bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindsym $mod+Return exec konsole
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec --no-startup-id dmenu_run
+# A more modern dmenu replacement is rofi:
+# bindcode $mod+40 exec "rofi -modi drun,run -show drun"
+# There also is i3-dmenu-desktop which only displays applications shipping a
+# .desktop file. It is a wrapper around dmenu, so you need that installed.
+# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym $mod+j focus left
+bindsym $mod+k focus down
+bindsym $mod+l focus up
+bindsym $mod+semicolon focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+j move left
+bindsym $mod+Shift+k move down
+bindsym $mod+Shift+l move up
+bindsym $mod+Shift+semicolon move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+# switch to workspace
+bindsym $mod+1 workspace number $ws1
+bindsym $mod+2 workspace number $ws2
+bindsym $mod+3 workspace number $ws3
+bindsym $mod+4 workspace number $ws4
+bindsym $mod+5 workspace number $ws5
+bindsym $mod+6 workspace number $ws6
+bindsym $mod+7 workspace number $ws7
+bindsym $mod+8 workspace number $ws8
+bindsym $mod+9 workspace number $ws9
+bindsym $mod+0 workspace number $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace number $ws1
+bindsym $mod+Shift+2 move container to workspace number $ws2
+bindsym $mod+Shift+3 move container to workspace number $ws3
+bindsym $mod+Shift+4 move container to workspace number $ws4
+bindsym $mod+Shift+5 move container to workspace number $ws5
+bindsym $mod+Shift+6 move container to workspace number $ws6
+bindsym $mod+Shift+7 move container to workspace number $ws7
+bindsym $mod+Shift+8 move container to workspace number $ws8
+bindsym $mod+Shift+9 move container to workspace number $ws9
+bindsym $mod+Shift+0 move container to workspace number $ws10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+
+set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
+mode "$mode_system" {
+    bindsym l exec --no-startup-id i3exit lock, mode "default"
+    bindsym e exec --no-startup-id i3exit logout, mode "default"
+    bindsym s exec --no-startup-id i3exit suspend, mode "default"
+    bindsym h exec --no-startup-id i3exit hibernate, mode "default"
+    bindsym r exec --no-startup-id i3exit reboot, mode "default"
+    bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default"
+
+    # back to normal: Enter or Escape
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+
+bindsym $mod+Shift+e mode "$mode_system"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym j resize shrink width 10 px or 10 ppt
+        bindsym k resize grow height 10 px or 10 ppt
+        bindsym l resize shrink height 10 px or 10 ppt
+        bindsym semicolon resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape or $mod+r
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+        bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Custom
+bindsym $mod+Shift+s "exec --no-startup-id maim -s | xclip -selection clipboard -target image/png"
+bindsym $mod+Shift+w "exec --no-startup-id brave"
+bindsym $mod+Shift+t "exec --no-startup-id deepin-screen-recorder"
+
+for_window [class=".*"] border pixel 1
+gaps outer 0
+gaps inner 4
+smart_gaps on
+smart_borders on
+
+client.focused          #4c7899 #285577 #ffffff #2e9ef4   #FF7276
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+		i3bar_command i3bar --transparency
+        status_command ~/.config/i3/run_i3_status.sh
+		position top
+		separator_symbol "⋆"
+		colors {
+			   background #101010dd
+		}
+}
+
+exec --no-startup-id xrandr --output HDMI-A-0 --auto --right-of eDPRR
\ No newline at end of file
diff --git a/.config/i3/config~ b/.config/i3/config~
new file mode 100644
index 0000000..15fd008
--- /dev/null
+++ b/.config/i3/config~
@@ -0,0 +1,218 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+#font pango:monospace 10
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango:DejaVu Sans Mono 10
+
+# The combination of xss-lock, nm-applet and pactl is a popular choice, so
+# they are included here as an example. Modify as you see fit.
+
+# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
+
+# NetworkManager is the most popular way to manage wireless networks on Linux,
+# and nm-applet is a desktop environment-independent system tray GUI for it.
+exec --no-startup-id nm-applet
+
+# Use pactl to adjust volume in PulseAudio.
+set $refresh_i3status killall -SIGUSR1 i3status
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +5% && $refresh_i3status
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -5% && $refresh_i3status
+bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
+bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindsym $mod+Return exec konsole
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec --no-startup-id dmenu_run
+# A more modern dmenu replacement is rofi:
+# bindcode $mod+40 exec "rofi -modi drun,run -show drun"
+# There also is i3-dmenu-desktop which only displays applications shipping a
+# .desktop file. It is a wrapper around dmenu, so you need that installed.
+# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym $mod+j focus left
+bindsym $mod+k focus down
+bindsym $mod+l focus up
+bindsym $mod+semicolon focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+j move left
+bindsym $mod+Shift+k move down
+bindsym $mod+Shift+l move up
+bindsym $mod+Shift+semicolon move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+# switch to workspace
+bindsym $mod+1 workspace number $ws1
+bindsym $mod+2 workspace number $ws2
+bindsym $mod+3 workspace number $ws3
+bindsym $mod+4 workspace number $ws4
+bindsym $mod+5 workspace number $ws5
+bindsym $mod+6 workspace number $ws6
+bindsym $mod+7 workspace number $ws7
+bindsym $mod+8 workspace number $ws8
+bindsym $mod+9 workspace number $ws9
+bindsym $mod+0 workspace number $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace number $ws1
+bindsym $mod+Shift+2 move container to workspace number $ws2
+bindsym $mod+Shift+3 move container to workspace number $ws3
+bindsym $mod+Shift+4 move container to workspace number $ws4
+bindsym $mod+Shift+5 move container to workspace number $ws5
+bindsym $mod+Shift+6 move container to workspace number $ws6
+bindsym $mod+Shift+7 move container to workspace number $ws7
+bindsym $mod+Shift+8 move container to workspace number $ws8
+bindsym $mod+Shift+9 move container to workspace number $ws9
+bindsym $mod+Shift+0 move container to workspace number $ws10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+
+set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
+mode "$mode_system" {
+    bindsym l exec --no-startup-id i3exit lock, mode "default"
+    bindsym e exec --no-startup-id i3exit logout, mode "default"
+    bindsym s exec --no-startup-id i3exit suspend, mode "default"
+    bindsym h exec --no-startup-id i3exit hibernate, mode "default"
+    bindsym r exec --no-startup-id i3exit reboot, mode "default"
+    bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default"
+
+    # back to normal: Enter or Escape
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+
+bindsym $mod+Shift+e mode "$mode_system"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym j resize shrink width 10 px or 10 ppt
+        bindsym k resize grow height 10 px or 10 ppt
+        bindsym l resize shrink height 10 px or 10 ppt
+        bindsym semicolon resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape or $mod+r
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+        bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Custom
+bindsym $mod+Shift+s "exec --no-startup-id maim -s | xclip -selection clipboard -target image/png"
+bindsym $mod+Shift+w "exec --no-startup-id brave"
+bindsym $mod+Shift+t "exec --no-startup-id deepin-screen-recorder"
+
+for_window [class=".*"] border pixel 1
+gaps outer 0
+gaps inner 4
+smart_gaps on
+smart_borders on
+
+client.focused          #4c7899 #285577 #ffffff #2e9ef4   #FF7276
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+		i3bar_command i3bar --transparency
+        status_command i3status --config ~/.config/i3/.i3status.conf
+		position top
+		separator_symbol "⋆"
+		colors {
+			   background #101010dd
+		}
+}
+
+exec --no-startup-id xrandr --output HDMI-A-0 --auto --right-of eDPRR
\ No newline at end of file
diff --git a/.config/i3/run_i3_status.sh b/.config/i3/run_i3_status.sh
new file mode 100755
index 0000000..31933e2
--- /dev/null
+++ b/.config/i3/run_i3_status.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+# shell script to prepend i3status with more stuff
+
+i3status --config ~/.config/i3/.i3status.conf | while :
+do
+    read line
+	WEATHER=$(sh /usr/bin/i3weather.sh)
+	echo "$line" || exit 1
+done
diff --git a/.config/i3/run_i3_status.sh~ b/.config/i3/run_i3_status.sh~
new file mode 100644
index 0000000..a7bbaa7
--- /dev/null
+++ b/.config/i3/run_i3_status.sh~
@@ -0,0 +1,8 @@
+#!/bin/sh
+# shell script to prepend i3status with more stuff
+
+i3status | while :
+do
+        read line
+        echo "mystuff | $line" || exit 1
+done
diff --git a/.config/i3/workspace-1.json b/.config/i3/workspace-1.json
new file mode 100644
index 0000000..c5bfffb
--- /dev/null
+++ b/.config/i3/workspace-1.json
@@ -0,0 +1,59 @@
+// vim:ts=4:sw=4:et
+{
+    "border": "pixel",
+    "current_border_width": 3,
+    "floating": "auto_off",
+    "geometry": {
+       "height": 1005,
+       "width": 1000,
+       "x": 0,
+       "y": 0
+    },
+    "marks": [],
+    "name": "i3: Layout saving in i3 — Mozilla Firefox",
+    "percent": 0.5,
+    "type": "con"
+}
+
+{
+    // splitv split container with 2 children
+    "border": "normal",
+    "floating": "auto_off",
+    "layout": "splitv",
+    "marks": [],
+    "percent": 0.5,
+    "type": "con",
+    "nodes": [
+        {
+            "border": "pixel",
+            "current_border_width": 3,
+            "floating": "auto_off",
+            "geometry": {
+               "height": 1033,
+               "width": 621,
+               "x": 1285,
+               "y": 14
+            },
+            "marks": [],
+            "name": "~ : bash — Konsole",
+            "percent": 0.5,
+            "type": "con"
+        },
+        {
+            "border": "pixel",
+            "current_border_width": 3,
+            "floating": "auto_off",
+            "geometry": {
+               "height": 639,
+               "width": 672,
+               "x": 0,
+               "y": 0
+            },
+            "marks": [],
+            "name": "emacs@Manjaro",
+            "percent": 0.5,
+            "type": "con"
+        }
+    ]
+}
+
diff --git a/.config/i3/workspace-1.json~ b/.config/i3/workspace-1.json~
new file mode 100644
index 0000000..355a065
--- /dev/null
+++ b/.config/i3/workspace-1.json~
@@ -0,0 +1,82 @@
+// vim:ts=4:sw=4:et
+{
+    "border": "pixel",
+    "current_border_width": 3,
+    "floating": "auto_off",
+    "geometry": {
+       "height": 1005,
+       "width": 1000,
+       "x": 0,
+       "y": 0
+    },
+    "marks": [],
+    "name": "i3: Layout saving in i3 — Mozilla Firefox",
+    "percent": 0.5,
+    "swallows": [
+       {
+       // "class": "^firefox$",
+       // "instance": "^Navigator$",
+       // "title": "^i3\\:\\ Layout\\ saving\\ in\\ i3\\ \\—\\ Mozilla\\ Firefox$",
+       // "window_role": "^browser$"
+       }
+    ],
+    "type": "con"
+}
+
+{
+    // splitv split container with 2 children
+    "border": "normal",
+    "floating": "auto_off",
+    "layout": "splitv",
+    "marks": [],
+    "percent": 0.5,
+    "type": "con",
+    "nodes": [
+        {
+            "border": "pixel",
+            "current_border_width": 3,
+            "floating": "auto_off",
+            "geometry": {
+               "height": 1033,
+               "width": 621,
+               "x": 1285,
+               "y": 14
+            },
+            "marks": [],
+            "name": "~ : bash — Konsole",
+            "percent": 0.5,
+            "swallows": [
+               {
+               // "class": "^konsole$",
+               // "instance": "^konsole$",
+               // "title": "^\\~\\ \\:\\ bash\\ \\—\\ Konsole$",
+               // "window_role": "^MainWindow\\#1$"
+               }
+            ],
+            "type": "con"
+        },
+        {
+            "border": "pixel",
+            "current_border_width": 3,
+            "floating": "auto_off",
+            "geometry": {
+               "height": 639,
+               "width": 672,
+               "x": 0,
+               "y": 0
+            },
+            "marks": [],
+            "name": "emacs@Manjaro",
+            "percent": 0.5,
+            "swallows": [
+               {
+               // "class": "^Emacs$",
+               // "instance": "^emacs$",
+               // "title": "^emacs\\@Manjaro$"
+               }
+            ],
+            "type": "con"
+        }
+    ]
+}
+
-- 
cgit v1.2.1