diff options
Diffstat (limited to 'elpa/auctex-13.1.3/doc/tex-ref.tex')
| -rw-r--r-- | elpa/auctex-13.1.3/doc/tex-ref.tex | 683 |
1 files changed, 683 insertions, 0 deletions
diff --git a/elpa/auctex-13.1.3/doc/tex-ref.tex b/elpa/auctex-13.1.3/doc/tex-ref.tex new file mode 100644 index 0000000..a7dfa34 --- /dev/null +++ b/elpa/auctex-13.1.3/doc/tex-ref.tex @@ -0,0 +1,683 @@ +% Reference Card for AUCTeX version 13.1 +%**start of header +\newcount\columnsperpage + +% This file has only been checked with 3 columns per page. But it +% should print fine either via DVI or PDFTeX. + +\columnsperpage=3 + +% Papersize stuff. Use default paper size for PDF, but switch +% orientation. Use papersize special for dvips. + +\ifx\pdfoutput\undefined + \csname newcount\endcsname\pdfoutput + \pdfoutput=0 +\fi + +\ifnum\pdfoutput=0 +% \special{papersize 8.5in,11in}% + \special{papersize 297mm,210mm}% +\else + \dimen0\pdfpagewidth + \pdfpagewidth\pdfpageheight + \pdfpageheight\dimen0 +\fi + + +% This file is intended to be processed by plain TeX (TeX82). +% compile-command: "tex tex-ref" or "pdftex tex-ref" +% +% Original author of Auc-TeX Reference Card: +% +% Terrence Brannon, PO Box 5027, Bethlehem, PA 18015 , USA +% internet: tb06@pl118f.cc.lehigh.edu (215) 758-1720 (215) 758-2104 +% +% Kresten Krab Thorup updated the reference card to 6. +% Per Abrahamsen updated the reference card to 7, 8, and 9. +% Ralf Angeli updated it to 11.50. +% And David Kastrup messed around with it, too, merging the math reference. +% +% Thanks to Stephen Gildea +% Paul Rubin, Bob Chassell, Len Tower, and Richard Mlynarik +% for creating the GNU Emacs Reference Card from which this was mutated + +\def\versionnumber{13.1} +\def\year{2022} +\def\version{February \year\ v\versionnumber} + +\def\shortcopyrightnotice{\vskip 1ex plus 2 fill + \centerline{\small \copyright\ \year\ Free Software Foundation, Inc. + Permissions on back. v\versionnumber}} + +\def\copyrightnotice{% +\vskip 1ex plus 2 fill\begingroup\small +\centerline{Copyright \copyright\ 1987, 1992-1994, 2004-2006, 2008, 2010,} +\centerline{2012, 2014-2017, 2019-2022 Free Software Foundation, Inc.} +\centerline{for AUC\TeX\ version \versionnumber} + +Permission is granted to make and distribute copies of +this card provided the copyright notice and this permission notice +are preserved on all copies. + + +\endgroup} + +% make \bye not \outer so that the \def\bye in the \else clause below +% can be scanned without complaint. +\def\bye{\par\vfill\supereject\end} + +\newdimen\intercolumnskip +\newbox\columna +\newbox\columnb + +\edef\ncolumns{\the\columnsperpage} + +\message{[\ncolumns\space + column\if 1\ncolumns\else s\fi\space per page]} + +\def\scaledmag#1{ scaled \magstep #1} + +% This multi-way format was designed by Stephen Gildea +% October 1986. +\if 1\ncolumns + \hsize 4in + \vsize 10in + \voffset -.7in + \font\titlefont=\fontname\tenbf \scaledmag3 + \font\headingfont=\fontname\tenbf \scaledmag2 + \font\smallfont=\fontname\sevenrm + \font\smallsy=\fontname\sevensy + + \footline{\hss\folio} + \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}} +\else + \hsize 3.2in + \vsize 7.6in + \hoffset -.75in + \voffset -.8in + \font\titlefont=cmbx10 \scaledmag2 + \font\headingfont=cmbx10 \scaledmag1 + \font\smallfont=cmr6 + \font\smallsy=cmsy6 + \font\eightrm=cmr8 + \font\eightbf=cmbx8 + \font\eightit=cmti8 + \font\eighttt=cmtt8 + \font\eightsl=cmsl8 + \font\eightsc=cmcsc8 + \font\eightsy=cmsy8 + \textfont0=\eightrm + \textfont2=\eightsy + \def\rm{\fam0 \eightrm} + \def\bf{\eightbf} + \def\it{\eightit} + \def\tt{\eighttt} + \def\sl{\eightsl} + \def\sc{\eightsc} + \normalbaselineskip=.8\normalbaselineskip + \ht\strutbox.8\ht\strutbox + \dp\strutbox.8\dp\strutbox + \normallineskip=.8\normallineskip + \normallineskiplimit=.8\normallineskiplimit + \normalbaselines\rm %make definitions take effect + + \if 2\ncolumns + \let\maxcolumn=b + \footline{\hss\rm\folio\hss} + \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}} + \else \if 3\ncolumns + \let\maxcolumn=c + \nopagenumbers + \else + \errhelp{You must set \columnsperpage equal to 1, 2, or 3.} + \errmessage{Illegal number of columns per page} + \fi\fi + + \intercolumnskip=.46in + \def\abc{a} + \output={% + % This next line is useful when designing the layout. + %\immediate\write16{Column \folio\abc\space starts with \firstmark} + \if \maxcolumn\abc \multicolumnformat \global\def\abc{a} + \else\if a\abc + \global\setbox\columna\columnbox \global\def\abc{b} + %% in case we never use \columnb (two-column mode) + \global\setbox\columnb\hbox to -\intercolumnskip{} + \else + \global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi} + \def\multicolumnformat{\shipout\vbox{\makeheadline + \hbox{\box\columna\hskip\intercolumnskip + \box\columnb\hskip\intercolumnskip\columnbox} + \makefootline}\advancepageno} + \def\columnbox{\leftline{\pagebody}} + + \def\bye{\par\vfill\supereject + \if a\abc \else\null\vfill\eject\fi + \if a\abc \else\null\vfill\eject\fi + \end} +\fi + +% we won't be using math mode much, so redefine some of the characters +% we might want to talk about +\catcode`\^=12 +\catcode`\_=12 + +\chardef\\=`\\ +\chardef\{=`\{ +\chardef\}=`\} + +\hyphenation{mini-buf-fer} + +\parindent 0pt +\parskip 1ex plus .5ex minus .5ex + +\def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip} + +\def\newcolumn{\vfill\eject} + +\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex} + +\def\section#1{\par\vskip 0pt plus 0.2\vsize \penalty-3000 + \vskip 0pt plus -0.2\vsize + \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}% + \vskip 2ex plus 1ex minus 1.5ex} + +\newdimen\keyindent + +\def\beginindentedkeys{\keyindent=1em} +\def\endindentedkeys{\keyindent=0em} +\endindentedkeys + +\def\paralign{\vskip\parskip\halign} + +\def\<#1>{$\langle${\rm #1}$\rangle$} + +\def\kbd#1{{\tt#1}\null} %\null so not an abbrev even if period follows +\def\var#1{{\tt #1}} +\def\file#1{{\tt #1}} + +\def\beginexample{\par\leavevmode\begingroup + \obeylines\obeyspaces\parskip0pt\tt} +{\obeyspaces\global\let =\ } +\def\endexample{\endgroup} + +\def\key#1#2{\leavevmode\hbox to \hsize{\vtop + {\hsize=.68\hsize\rightskip=1em + \hskip\keyindent\relax#1}\kbd{#2}\hfil}} + +\newbox\metaxbox +\setbox\metaxbox\hbox{\kbd{M-x }} +\newdimen\metaxwidth +\metaxwidth=\wd\metaxbox + +\def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize + {\hskip\keyindent\relax#1\hfil}% + \hskip -\metaxwidth minus 1fil + \kbd{#2}\hfil}} + +\def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\quad + &\kbd{#3}\quad\cr} + +\def\LaTeX{% + L\kern-.36em\raise.3ex\hbox{\sc{a}}\kern-.15em\TeX} + +%**end of header + +\title{AUC\TeX\ Reference Card} + +\centerline{(for version \versionnumber)} + +\section{Conventions Used} + +\key{Carriage Return or \kbd{C-m}}{RET} +\key{Tabular or \kbd{C-i}}{TAB} +\key{Linefeed or \kbd{C-j}}{LFD} + +\section{Shell Interaction} + +\key{Run a command on the master file}{C-c C-c} +\key{Run a command on the buffer}{C-c C-b} +\key{Run a command on the region}{C-c C-r} +\key{Fix the region}{C-c C-t C-r} +\key{Kill job}{C-c C-k} +\key{Recenter output buffer}{C-c C-l} +\key{Next error in \TeX/\LaTeX\ session}{C-c `} +\key{Previous error in \TeX/\LaTeX\ session}{M-g p} +\key{Toggle debug of bad boxes}{C-c C-t C-b} +\key{Toggle debug of warnings}{C-c C-t C-w} +\key{View output file}{C-c C-v} +\key{Compile all and view output file}{C-c C-a} + +Commands you can run on the master file (with \kbd{C-c C-c}) or the +region (with \kbd{C-c C-r}) include the following (starred versions +are not available in all modes): + +\def\star{\llap{\rm*}} +\key{\TeX}{\star TeX} +\key{\LaTeX}{\star LaTeX} +\key{Con\TeX{}t (once)}{\star ConTeXt} +\key{Con\TeX{}t Full}{\star ConTeXt Full} +\key{Makeinfo}{\star Makeinfo} +\key{Makeinfo with HTML output}{\star Makeinfo HTML} +\key{Appropriate previewer}{View} +\key{Print the output}{Print} +\key{Bib\TeX}{BibTeX} +\key{Biber}{Biber} +\key{MakeIndex}{Index} +\key{LaCheck}{Check} +\key{Make (PostScript) File}{File} +\key{Ispell}{Spell} +\key{Delete intermediate files}{Clean} +\key{Delete all output files}{Clean All} + +\section{\TeX ing options} +\TeX\ runs can come in various types, which may be toggled and are +indicated in the mode line. + +\key{PDF/DVI mode}{C-c C-t C-p} +\key{Stop on errors (Interactive mode)}{C-c C-t C-i} +\key{I/O correlation (S. Specials, Sync\TeX)}{C-c C-t C-s} + +\section{Miscellaneous} + +\key{Read AUC\TeX\ manual}{C-c TAB} +\key{Find documentation}{C-c ?} +\key{Math Mode}{C-c \string~} +\key{Reset Buffer}{C-c C-n} +\key{Reset AUC\TeX}{C-u C-c C-n} + +\section{Multifile Handling} + +\key{Save Document}{C-c C-d} +\key{Switch to master file or active buffer}{C-c ^} +\key{Query for a master file}{C-c \_} + +\section{Command Insertion} + +\key{Insert Section}{C-c C-s} +\key{Insert \LaTeX\ environment}{C-c C-e} +\key{Insert item}{C-c LFD} +\key{Insert item (alias)}{M-RET} +\key{Close \LaTeX\ environment}{C-c ]} +\key{Insert \TeX\ macro \kbd{\{\}} }{C-c C-m} +\key{Insert double brace}{C-c \{} +\key{Complete \TeX\ macro}{M-TAB} +\key{Smart ``quote''}{"} +\key{Smart ``dollar''}{\$} + +\section{Font Selection} + +\key{Insert {\bf bold\/} text}{C-c C-f C-b} +\key{Insert {\it italics\/} text}{C-c C-f C-i} +\key{Insert {\rm roman} text}{C-c C-f C-r} +\key{Insert {\it emphasized\/} text}{C-c C-f C-e} +\key{Insert {\tt typewriter\/} text}{C-c C-f C-t} +\key{Insert {\sl slanted\/} text}{C-c C-f C-s} +\key{Insert {\sc Small Caps\/} text}{C-c C-f C-c} +\key{Delete font}{C-c C-f C-d} +\key{Replace font}{C-u C-c C-f \<key>} + +\section{Source Formatting} + +\key{Indent current line}{TAB} +\key{Indent next line}{LFD} + +\key{Format a paragraph}{M-q} +\key{Format a region}{C-c C-q C-r} +\key{Format a section}{C-c C-q C-s} +\key{Format an environment}{C-c C-q C-e} + +\key{Mark an environment}{C-c .} +\key{Mark a section}{C-c *} + +\key{Comment or uncomment region}{C-c ;} +\key{Comment or uncomment paragraph}{C-c \%} + +\copyrightnotice + +\newcolumn + +\title{Math Mode} + +\section{Variables} + +All math mode commands are under the prefix key specified by +\var{LaTeX-math-abbrev-prefix}, default is ``\kbd{`}''. + +You can define your own math mode commands by setting the variable +\var{LaTeX-math-list} before enabling \var{LaTeX-math-mode}. + +\section{Greek Letters} + +\def\disp#1{\hbox to 6ex{$#1$\hfill}} +\def\twocol#1\par{{% + \def\key##1##2{##1&##2\cr}% + \setbox0\vbox{\halign to 0.45\hsize{\tabskip0ptplus1fil\relax + ##\hfil&\kbd{##}\hfil\cr\vrule width0ptheight\ht\strutbox#1}}% + \line{% + \splittopskip=\ht\strutbox + \dimen0\ht0 + \advance\dimen0\baselineskip + \setbox2\vsplit0to0.5\dimen0 + \vtop{\unvbox2}\hfill\raise \ht\strutbox \vtop {\unvbox0}}}} +\def\keycs#1#2#{\keycsii#1{#2}} +\def\keycsii#1#2#3{\key{\disp{#1#2} ({\tt\string#1})}{#3}} + +\twocol +\keycs\alpha{a} +\keycs\beta{b} +\keycs\gamma{g} +\keycs\delta{d} +\keycs\epsilon{e} +\keycs\zeta{z} +\keycs\eta{h} +\keycs\theta{j} +\keycs\kappa{k} +\keycs\lambda{l} +\keycs\mu{m} +\keycs\nu{n} +\keycs\xi{x} +\keycs\pi{p} +\keycs\rho{r} +\keycs\sigma{s} +\keycs\tau{t} +\keycs\upsilon{u} +\keycs\phi{f} +\keycs\chi{q} +\keycs\psi{y} +\keycs\omega{w} +\keycs\Delta{D} +\keycs\Gamma{G} +\keycs\Theta{J} +\keycs\Lambda{L} +\keycs\Xi{X} +\keycs\Pi{P} +\keycs\Sigma{S} +\keycs\Upsilon{U} +\keycs\Phi{F} +\keycs\Psi{Y} +\keycs\Omega{W} + +\section{Symbols} + +\twocol +\keycs\rightarrow{C-f} +\keycs\leftarrow{C-b} +\keycs\uparrow{C-p} +\keycs\downarrow{C-n} +\keycs\leq{<} +\keycs\geq{>} +\keycs\tilde x{\string~} +\keycs\hat x{^} +\keycs\nabla{N} +\keycs\infty{I} +\keycs\forall{A} +\keycs\exists{E} +\keycs\not \ {/} +\keycs\in{i} +\keycs\times{*} +\keycs\cdot{.} +\keycs\colon{:} +\keycs\subset{\{} +\keycs\supset{\}} +\keycs\subseteq{[} +\keycs\supseteq{]} +\keycs\emptyset{0} +\keycs\setminus{\\} +\keycs\cup{+} +\keycs\cap{-} +\keycs\langle{(} +\keycs\rangle{)} +\keycs\exp{C-e} +\keycs\sin{C-s} +\keycs\cos{C-c} +\keycs\sup{C-^} +\keycs\inf{C-_} +\keycs\det{C-d} +\keycs\lim{C-l} +\keycs\tan{C-t} +\keycs\vee{|} +\keycs\wedge{\&} + +\section{Miscellaneous} + +\key{cal letters}{c \<letter>} + +\newcolumn + +\def\previewlatex{{preview-latex}} +\title{\previewlatex} +\section{Activation} +\previewlatex\ is part of AUC\TeX. If it is active, you should see an +entry ``Preview'' in the menu bar when editing \LaTeX{} files. If you +have a ``LaTeX'', but no ``Preview'' menu, add the following to your +init file (usually \file{\string~/.emacs.d/init.el}): +\beginexample +(load "preview-latex.el" nil t t) +\endexample + +\section{Usage and keybindings} +\previewlatex\ operation only affects the display of the buffer, not +its contents. It runs only on demand, using the target {\sc dvi} or +{\sc PDF} files in the process. The first command in the following +list (also on the toolbar button) will (as applicable) repreview an +active region or a single modified preview, toggle the visibility of +an unmodified preview or generate previews for a surrounding buffer +area up to the next preview. + +\key{Preview at point}{C-c C-p C-p} +\key{Preview environment}{C-c C-p C-e} +\key{Preview region}{C-c C-p C-r} +\key{Preview buffer}{C-c C-p C-b} +\key{Preview document}{C-c C-p C-d} +\key{Remove previews at point}{C-c C-p C-c C-p} +\key{Remove previews from region}{C-c C-p C-c C-r} +\key{Remove previews from buffer}{C-c C-p C-c C-b} +\key{Remove previews from document}{C-c C-p C-c C-d} +\key{Cache preamble}{C-c C-p C-f} +\key{Switch off preamble cache}{C-c C-p C-c C-f} +\key{Read Texinfo manual}{C-c C-p TAB} +\key{Copy region as MML}{C-c C-p C-w} + +The last keysequence will copy a region with previews into the kill +ring in a form fit for sending in Emacs' {\tt message-mode}. + +\section{Customization within Emacs} + +You can use \kbd{M-x customize-variable RET} or the ``Preview\slash +Customize'' menu for customization. Worthwhile settings: + +\halign to \hsize{\tabskip=1ptplus1fil\relax#\hfil&\hfil\var{#}\tabskip0pt\cr +\noalign{\medskip If you have dvipng available:} +Set to \kbd{dvipng}&preview-image-type\cr +\noalign{\medskip \vbox{Keep counter values when regenerating + single previews:}} +Set to \kbd{t}&preview-preserve-counters\cr +\noalign{\medskip \vbox{Cache/Don't cache preamble without query +(preamble caching is done using \file{mylatex.ltx} and might not always +work. Use the appropriate key sequences for overriding the following +setting):}} +Set to \kbd{t}/\kbd{nil}&preview-auto-cache-preamble\cr} + +\section{Customization from \LaTeX{}} +Customization is done in the document preamble (you need to load +\file{preview.sty} explicitly) or in \file{prauctex.cfg} (which should +load the system \file{prauctex.cfg} first). Commands: + +\halign to \hsize{\tabskip=1ptplus1fil\relax#\hfil&\hfil\kbd{#}\tabskip0pt\cr +Preview macro&\string\PreviewMacro[\{\<args>\}]\{\<macro>\}\cr +Preview env&\string\PreviewEnvironment[\{\<args>\}]\{\<env>\}\cr +Skip macro&\string\PreviewMacro*[\{\<args>\}]\{\<macro>\}\cr +Skip env&\string\PreviewEnvironment*[\{\<args>\}]\{\<env>\}\cr +\noalign{\smallskip Diverting material from float environments} +Snarf stuff&\string\PreviewSnarfEnvironment[\{\<args>\}]\{\<env>\}\cr +} + +Values to be used within \<args>: +\halign to +\hsize{\tabskip=1ptplus1fil\relax#\hfil&\hfil\kbd{#}\tabskip0pt\cr +Optional argument&[]\cr +Mandatory argument&\{\}\cr +Optional star&*\cr +Conditionals&?\<token>\{\<if found>\}\{\<if not found>\}\cr +Skip next token&-\cr +Transformation&\#\{\<macro args>\}\{\<replacement>\}\cr +} + +More options and explanations can be found in \file{preview.pdf} or the +Texinfo manual. + +\vskip 5ex plus 6ex minus 1ex + +\title{Folding Source Display} + +\key{Toggle folding mode}{C-c C-o C-f} +\key{Hide all items in buffer}{C-c C-o C-b} +\key{Hide all items in region}{C-c C-o C-r} +\key{Hide all items in paragraph}{C-c C-o C-p} +\key{Hide current macro}{C-c C-o C-m} +\key{Hide current environment}{C-c C-o C-e} +\key{Show all items in buffer}{C-c C-o b} +\key{Show all items in region}{C-c C-o r} +\key{Show all items in paragraph}{C-c C-o p} +\key{Show current item}{C-c C-o i} +\key{Hide or show current item}{C-c C-o C-o} + +\vskip 5ex plus 6ex minus 1ex + +\title{Outlining \TeX\ Documents} + +AUC\TeX\ supports outline mode by defining section, subsection, +etc. as heading levels. You can use \kbd{M-x outline-minor-mode RET} +to toggle outline minor mode. All outline minor mode commands are +under the prefix key specified by \var{outline-minor-mode-prefix}, default +is \kbd{C-c @}. + +\key{Hide all of buffer except headings}{C-c @ C-t} +\key{Show all text in buffer}{C-c @ C-a} +\key{Hide body following this heading}{C-c @ C-c} +\key{Show body following this heading}{C-c @ C-e} +\key{Hide subtree}{C-c @ C-d} +\key{Show subtree}{C-c @ C-s} +\key{All subheadings visible}{C-c @ C-k} + +\key{next visible heading}{C-c @ C-n} +\key{previous visible heading}{C-c @ C-p} +\key{forward to next subheading}{C-c @ C-f} +\key{backward to next subheading}{C-c @ C-b} +\key{up one heading level}{C-c @ C-u} + +\newcolumn + +\iftrue % RefTeX long version + +\title{RefTeX} + +\section{Activation} + +RefTeX is part of Emacs. To activate and make it interact with +AUCTeX, insert the following lines in \file{init.el}. +\vskip-3mm +\beginexample +(add-hook 'LaTeX-mode-hook \#'turn-on-reftex) +(setq reftex-plug-into-AUCTeX t) +\endexample + +\section{Table of Contents} +The table of contents is a structured view of the entire document. It +contains the sections, and optionally labels, index entries, and file +boundaries. + +\key{Show the table of contents$\sp1$}{C-c =} +\key{Recenter *toc* buffer to here$\sp1$}{C-c -} + +\section{Crossreferences, Citations, Index} + +\key{Insert unique label$\sp1$}{C-c (} +\key{Reference a label$\sp1$}{C-c )} +\key{Insert citation with key selection}{C-c [} +\key{\dots\ prompt for optional arguments}{C-u C-c [} +\key{Index word at point with default macro}{C-c /} +\key{Insert an index entry}{C-c <} +\key{Add word to index phrases}{C-c \\} +\key{Visit index phrases buffer}{C-c |} +\key{Compile and display index}{C-c >} +\key{View cross reference$\sp1$}{C-c \&} +\key{View cross reference with mouse}{S-mouse-2} +\key{View cross reference from BibTeX file}{C-c \&} + +\section{Standard keys in special buffers} +RefTeX's special buffers have many active keys. The common ones are: + +\key{Display summary of active keys}{?} +\key{Select this item}{RET} +\key{Rescan the document}{r} +\key{Display location in other window}{SPC} +\key{Follow mode}{f} + +\section{Multifile actions} +Since RefTeX scans the entire (multifile) document, it can provide +commands that act on all files of a document. Check the \kbd{ +Ref->Global Actions} menu for these commands. + +\section{Variables} + +To tell reftex about your own macro definitions, customize the +variables +\vskip-3mm +\beginexample +reftex-label-alist +reftex-section-levels +reftex-index-macros +reftex-cite-format +\endexample + +\vskip2mm\hrule +$\sp1$ An argument of \kbd{C-u} triggers a document scan first. This can +be necessary if file content and RefTeX's knowledge are no longer +consistent. + +\else % RefTeX compact version + +\csname title\endcsname{RefTeX} + +\section{Activation in init.el} + +\vskip-4mm +\beginexample +(add-hook 'LaTeX-mode-hook \#'turn-on-reftex) +(setq reftex-plug-into-AUCTeX t) +\endexample + +\section{Table of Contents} + +\key{Show the table of contents$\sp1$}{C-c =} +\key{Recenter *toc* buffer to here$\sp1$}{C-c -} + +\section{Crossreferences, Citations, Index} + +\key{Insert unique label$\sp1$}{C-c (} +\key{Reference a label$\sp1$}{C-c )} +\key{Insert citation with key selection}{C-c [} +\key{... prompt for optional arguments}{C-u C-c [} +\key{Index word at point with default macro}{C-c /} +\key{Insert an index entry}{C-c <} +\key{Add word to index phrases}{C-c \\} +\key{Visit index phrases buffer}{C-c |} +\key{Compile and display index}{C-c >} +\key{View cross reference$\sp1$}{C-c \&} +\key{View cross reference with mouse}{S-mouse-2} +\key{View cross reference from BibTeX file}{C-c \&} + +\vskip2mm\hrule +$\sp1$ An argument of \kbd{C-u} triggers a document scan first. + +\fi + +\bye + +%%% Local Variables: +%%% mode: plain-TeX +%%% TeX-master: t +%%% End: |