From 3f4a0d5370ae6c34afe180df96add3b8522f4af1 Mon Sep 17 00:00:00 2001 From: mattkae Date: Wed, 11 May 2022 09:23:58 -0400 Subject: initial commit --- elpa/org-9.5.2/doc/.aspell.org.conf | 81 + elpa/org-9.5.2/doc/.nosearch | 1 + elpa/org-9.5.2/doc/Documentation_Standards.org | 171 + elpa/org-9.5.2/doc/Makefile | 102 + elpa/org-9.5.2/doc/dir | 19 + elpa/org-9.5.2/doc/doc-setup.org | 53 + elpa/org-9.5.2/doc/fdl.org | 490 + elpa/org-9.5.2/doc/htmlxref.cnf | 2 + elpa/org-9.5.2/doc/org-guide.org | 2654 +++ elpa/org-9.5.2/doc/org-manual.org | 22234 +++++++++++++++++++++ elpa/org-9.5.2/doc/org-version.inc | 3 + elpa/org-9.5.2/doc/org.texi | 23491 +++++++++++++++++++++++ elpa/org-9.5.2/doc/orgcard.tex | 691 + elpa/org-9.5.2/doc/orgguide.texi | 2688 +++ elpa/org-9.5.2/doc/pdflayout.sty | 44 + elpa/org-9.5.2/doc/texinfo.tex | 10145 ++++++++++ 16 files changed, 62869 insertions(+) create mode 100644 elpa/org-9.5.2/doc/.aspell.org.conf create mode 100644 elpa/org-9.5.2/doc/.nosearch create mode 100644 elpa/org-9.5.2/doc/Documentation_Standards.org create mode 100644 elpa/org-9.5.2/doc/Makefile create mode 100644 elpa/org-9.5.2/doc/dir create mode 100644 elpa/org-9.5.2/doc/doc-setup.org create mode 100644 elpa/org-9.5.2/doc/fdl.org create mode 100644 elpa/org-9.5.2/doc/htmlxref.cnf create mode 100644 elpa/org-9.5.2/doc/org-guide.org create mode 100644 elpa/org-9.5.2/doc/org-manual.org create mode 100644 elpa/org-9.5.2/doc/org-version.inc create mode 100644 elpa/org-9.5.2/doc/org.texi create mode 100644 elpa/org-9.5.2/doc/orgcard.tex create mode 100644 elpa/org-9.5.2/doc/orgguide.texi create mode 100644 elpa/org-9.5.2/doc/pdflayout.sty create mode 100644 elpa/org-9.5.2/doc/texinfo.tex (limited to 'elpa/org-9.5.2/doc') diff --git a/elpa/org-9.5.2/doc/.aspell.org.conf b/elpa/org-9.5.2/doc/.aspell.org.conf new file mode 100644 index 0000000..dd8601d --- /dev/null +++ b/elpa/org-9.5.2/doc/.aspell.org.conf @@ -0,0 +1,81 @@ +# Aspell configuration for proof reading Org documentation. + +# Org documentation is written in American... + +master en_US-w_accents +lang en_US + +# Assume the Org specific word and replacement lists are in the doc +# directory and that any spell check is also run from there. Specify +# this file when running aspell by some command like: +# +# $ aspell check --per-conf=".aspell.org.conf" org.texi + +personal ./.aspell.org.pws +repl ./.aspell.org.prepl + +# Checking options. See man aspell. + +save-repl true +sug-mode normal +ignore-case false +ignore-accents false + +# Filters + +# For some reason the following doesn't seem to work which stuffs up +# trying to use Ispell mode from an Emacs buffer (at least I cannot +# make it work) but aspell seems abot to recognise texinfo files +# automatically when checking from the command line so it doesn't +# matter much. + +# mode texinfo + +lset-filter tex:url + +# Let's be clear about what we choose to ignore. + +clear-f-texinfo-ignore + +add-f-texinfo-ignore c +add-f-texinfo-ignore code +add-f-texinfo-ignore command +add-f-texinfo-ignore documentencoding +add-f-texinfo-ignore email +add-f-texinfo-ignore env +add-f-texinfo-ignore file +add-f-texinfo-ignore kbd +add-f-texinfo-ignore macro +add-f-texinfo-ignore option +add-f-texinfo-ignore printindex +add-f-texinfo-ignore samp +add-f-texinfo-ignore set +add-f-texinfo-ignore setfilename +add-f-texinfo-ignore syncode +add-f-texinfo-ignore url +add-f-texinfo-ignore value +add-f-texinfo-ignore var +add-f-texinfo-ignore verb +add-f-texinfo-ignore verbatiminclude +add-f-texinfo-ignore vskip + +# Utility options + +backup true +guess true +suggest true + +# Miscellaneous +# +# Org documentation uses a lot of compound words. Try and ignore them +# rather than including them in a specific word list. + +run-together-limit 2 +run-together-min 2 + +# + +# Local variables: +# fill-column: 72 +# mode: conf +# End: diff --git a/elpa/org-9.5.2/doc/.nosearch b/elpa/org-9.5.2/doc/.nosearch new file mode 100644 index 0000000..50a914b --- /dev/null +++ b/elpa/org-9.5.2/doc/.nosearch @@ -0,0 +1 @@ +No search diff --git a/elpa/org-9.5.2/doc/Documentation_Standards.org b/elpa/org-9.5.2/doc/Documentation_Standards.org new file mode 100644 index 0000000..c4dd862 --- /dev/null +++ b/elpa/org-9.5.2/doc/Documentation_Standards.org @@ -0,0 +1,171 @@ +#+TITLE: Notes on documenting Org +#+AUTHOR: Phil Rooke +#+EMAIL: phil@yax.org.uk +#+LANGUAGE: en +#+STARTUP: showall +#+TEXT: Notes to myself justifying the conventions and standards in my +#+TEXT: set of recent doc patches. +#+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:nil *:t TeX:t + +* Background + +I think it is an express objective of Carsten's that Org should be +readily accessible to all users of Emacs and not just those who might +happen to read or hack on the code of this particular package. To +that end significant effort has been made and continues to be made by +the Org community to ensure that high quality, user focused, +documentation is readily available to everyone. + +Org itself contains a comprehensive guide to using all aspects of the +system, how to extend it yourself, and highlights some of the many +burgeoning number of add-on packages that others are contributing. +This guide, [[info:org:Top][The Org Manual]], concentrates on the facts of working with +the system. Supplementing this, the [[Org web pages]] contain pointers to +many tutorials and how-to's which capture much of spirit and +imagination people show when using Org as a basis for building broader +organizational systems that help them help themselves. + +I use Org, but it is a big system, and so I happen to think that +improving the consistency, clarity and accuracy of Org documents helps +both me and all other users of the system. In support of this and by +way of justification and clarification, this short note attempts to +capture some of the existing guidelines and standards that have been +used in the patches I am submitting and, which I hope, may be adopted +by others when making their own contributions. + +* Referencing systems, packages, modes and much else + +Originally Org was a single mode and there was no ambiguity about what +Org mode could refer to. Things have changed rapidly though and it +seems that Carsten now thinks of Org as the system encompassing the +major mode, some minor modes, and an increasing number of additional +packages and plug-ins that build on the core Org functionality. It is +really hard to find a consistent way to refer to all these things, but +what I am trying to do is follow these guidelines (which are not +perfect, merely a start): + +- In general write "Org" as much as possible and, in particular, when + discussing concepts, features and functions that are generally + applicable to Org as a whole. + +- Be more specific and write, for example, "the Orgtbl minor mode" + when referring to something unique to that feature. It may be, for + example, a command is only available when you are actually editing a + file using just that mode, add-on package or plug-in. + +- Prefer "Org mode" to "Org-mode" or "org-mode". This is simply + because it reflects an existing convention in [[info:emacs:Top][The Emacs Manual]] which + consistently documents mode names in this form - "Text mode", + "Outline mode", "Mail mode", etc. + +- Likewise refer, if at all possible, to "Org file or "Org buffer" + meaning with, great generality, any file or buffer which requires + use of some part of Org to edit it properly. + +- Org uses "org-..." to ring fence a name space for itself in the + Emacs code base. This is obviously retained in code snippets. + +* Other Org specific conventions + +Unless there is a good reason to do otherwise, then try and adopt the +following conventions. (I think all can be justified by reference to +Carsten or precedent in other significant Emacs documentation, unless +I have made them up of course). + +- Org has *lots* of commands and a /lot/ of them take prefix arguments of + one sort or another. Write in full "prefix argument", "numeric + prefix argument" or, maybe, "a numeric prefix argument N" when you + want to refer to the argument again. + +- Org lives in various states of harmony and discord with other Emacs + packages. Try and write the names of those packages as their + authors and maintainers write them. So it should be (I think) BBDB, + MH-E, Rmail, VM, Gnus, CDLaTeX etc. + +- TODO keywords, whether Org or user defined, are written in capitals. + +- Built-in tags with a special meaning (e.g. ARCHIVE) are written in + uppercase. User defined tags (e.g. boss, home) are written in + lowercase. + +- Built-in properties (e.g. PRIORITY) are written in uppercase. User + defined properties (e.g. Release) are written in lowercase. + +- Entries in the concept index are normally all lower case unless some + other rule dictates otherwise. + +* org-manual.org specific conventions + +Org git repository comes with an .org version of the manual in the +=doc/= directory. Here are indications that are specific to this +version of the manual. + +- Five of the standard Texinfo indexes are used in the Org manual: + + + #+cindex: :: concept index, for general concepts + + #+findex: :: function index, for function and function-like names + + #+kindex: :: keystroke index, for keyboard commands + + #+pindex: :: program index, for names of programs + + #+vindex: :: variable index, for variable names + +- Use fixed-width area for one-line examples. + +- Use example blocks for Org syntax instead of "begin_src org". + +- Internal links to headlines always start with a star. + +- Tags, node properties, are not shown with the surrounding colons. + +- When to use = ... = or ~ ... ~ markup: + + + files or extensions use = ... =, + + anything that is meant to be written in the Org buffer uses = ... =, + + any meaningful token in a programming language uses ~ ... ~. + +* Miscellaneous + + - Only two of the standard Texinfo indexes are used; those for + concepts and keys. This has some implications: + + + The preference is to document commands by key rather than by name + + + Texinfo commands such as @var and @defoption are not used. The + preference for this type of thing is that the user browses the + customize groups. If you want or need to refer to, say, a + variable then document it as "the variable + @code{org-startup-folded}" + + + Entries in the concept index are normally all lower case unless + some other rule dictates otherwise. + + - Org documentation is written in American English, which is somewhat + foreign as far as I am concerned, but live with it anyway. + + - Org uses a number of compound words, words that I wouldn't + necessarily run together. Instead of worrying about whether these + should be separate, hyphenated or compound I have simply gone with + the majority case as originally written and then tried to make sure + the spell checker knows what this chosen standard should be so that + I do not worry about it anymore. + + - I have run a spell checker periodically. Aspell works well and has + a useful Texinfo filter (although, annoyingly, I cannot make this + work with ispell.el and so I run it from the command line). I have + an Org specific Aspell configuration file (which sets an American + dictionary, rules for compound words etc) and which, along with the + associated word and replacement files, captures some of the more + detailed and somewhat arbitrary rules I have used. + + - Org has really low entry barriers. Requirements seem simply to be: + + + You can use Text mode or, pretty much, any derivative of it + + You have some motivation to become slightly better organized. + + Therefore, try and write the documentation so that it is relevant + to, and can be read by such a diverse audience. + +# Local variables: +# mode: org +# ispell-local-dictionary: "en_US-w_accents" +# ispell-local-pdict: "./.aspell.org.pws" +# End: diff --git a/elpa/org-9.5.2/doc/Makefile b/elpa/org-9.5.2/doc/Makefile new file mode 100644 index 0000000..cb6d72b --- /dev/null +++ b/elpa/org-9.5.2/doc/Makefile @@ -0,0 +1,102 @@ +.SUFFIXES: # we don't need default suffix rules +ifeq ($(MAKELEVEL), 0) + $(error This make needs to be started as a sub-make from the toplevel directory.) +endif +.PHONY: all info html pdf card manual guide install \ + clean cleanall clean-install + +all: $(ORG_MAKE_DOC) + +info: org orgguide + +html: org.html orgguide.html + +pdf: org.pdf orgguide.pdf + +card: orgcard.pdf orgcard_letter.pdf orgguide.pdf + +ifneq ($(SERVERMK),) +manual guide:: + -$(RMR) $@ + $(MKDIR) $@ +manual:: org.texi org-version.inc + $(TEXI2HTML) -o $@ $< + ../mk/mansplit.pl $@/* +guide:: orgguide.texi org-version.inc + $(TEXI2HTML) -o $@ $< + ../mk/guidesplit.pl $@/* +endif + +org.texi: org-manual.org + $(BATCH) \ + --eval '(add-to-list `load-path "../lisp")' \ + --eval '(load "../mk/org-fixup.el")' \ + --eval '(org-make-manual)' + +orgguide.texi: org-guide.org + $(BATCH) \ + --eval '(add-to-list `load-path "../lisp")' \ + --eval '(load "../mk/org-fixup.el")' \ + --eval '(org-make-guide)' + +org-version.inc: org.texi + @echo "org-version: $(ORGVERSION) ($(GITVERSION))" + @echo "@c automatically generated, do not edit" > org-version.inc + @echo "@set VERSION $(ORGVERSION) ($(GITVERSION))" >> org-version.inc + @echo "@set DATE $(DATE)" >> org-version.inc + +org-version.tex: orgcard.tex + @printf "org-version: $(ORGVERSION) ($(GITVERSION))\n" + @printf "%% automatically generated, do not edit\n" > org-version.tex + @printf "\def\orgversionnumber{$(ORGVERSION)}\n" >> org-version.tex + @printf "\def\\\\versionyear{$(YEAR)}\n" >> org-version.tex + @printf "\def\year{$(YEAR)}\n" >> org-version.tex + +install: org orgguide + if [ ! -d $(DESTDIR)$(infodir) ]; then $(MKDIR) $(DESTDIR)$(infodir); else true; fi ; + $(CP) org.info $(DESTDIR)$(infodir) + $(CP) orgguide.info $(DESTDIR)$(infodir) + $(INSTALL_INFO) --infodir=$(DESTDIR)$(infodir) org.info + $(INSTALL_INFO) --infodir=$(DESTDIR)$(infodir) orgguide.info + +clean: + $(RM) *.pdf *.html *.info *_letter.tex org-version.inc org-version.tex \ + *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.pg *.pgs *.toc \ + *.tp *.tps *.vr *.vrs *.log *.ps +cleanall: clean + $(RM) org.texi orgguide.texi + $(RMR) guide manual + +clean-install: + $(RM) $(DESTDIR)$(infodir)/org* + $(INSTALL_INFO) --infodir=$(DESTDIR)$(infodir) --remove org + $(INSTALL_INFO) --infodir=$(DESTDIR)$(infodir) --remove orgguide + +.SUFFIXES: .texi .tex .txt _letter.tex + +%: %.texi org-version.inc + $(MAKEINFO) --no-split $< -o $@.info + +# the following two lines work around a bug in some versions of texi2dvi +%.pdf: LC_ALL=C +%.pdf: LANG=C +%.pdf: %.texi org-version.inc + $(TEXI2PDF) $< +%.pdf: %.tex org-version.tex + PDFLATEX=$(PDFTEX) $(TEXI2PDF) $< + +%.html: %.texi org-version.inc + $(TEXI2HTML) --no-split -o $@ $< +ifneq ($(SERVERMK),) + ../mk/manfull.pl $@ + +%.txt: %.tex + perl ../mk/orgcard2txt.pl $< > $@ +endif + +%_letter.tex: %.tex + $(BATCH) \ + --eval '(add-to-list `load-path "../lisp")' \ + --eval '(load "org-compat.el")' \ + --eval '(load "../mk/org-fixup.el")' \ + --eval '(org-make-letterformat "$(" visits the Emacs manual, etc. + + In Emacs, you can click mouse button 2 on a menu item or cross reference + to select it. + +* Menu: + +Emacs +* Org Mode: (org). Outline-based notes management and organizer. +* Org Guide: (orgguide). Abbreviated Org mode manual. diff --git a/elpa/org-9.5.2/doc/doc-setup.org b/elpa/org-9.5.2/doc/doc-setup.org new file mode 100644 index 0000000..f59660e --- /dev/null +++ b/elpa/org-9.5.2/doc/doc-setup.org @@ -0,0 +1,53 @@ +# SETUPFILE for Org manual + +# Copyright (C) 2021 Free Software Foundation, Inc. +# +# This file is part of GNU Emacs. +# +# GNU Emacs is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# GNU Emacs is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Emacs. If not, see . + +# XXX: We cannot use TODO keyword as a node starts with "TODO". +#+todo: REVIEW FIXME | DONE +#+property: header-args :eval no +#+startup: overview nologdone + +# Use proper quote and backtick for code sections in PDF output +# Cf. Texinfo manual 14.2 +#+texinfo_header: @set txicodequoteundirected +#+texinfo_header: @set txicodequotebacktick + +# Contact Info +#+texinfo_header: @set MAINTAINERSITE @uref{https://orgmode.org,maintainers webpage} +#+texinfo_header: @set MAINTAINER Bastien Guerry +#+texinfo_header: @set MAINTAINEREMAIL @email{bzg@gnu.org} +#+texinfo_header: @set MAINTAINERCONTACT @uref{mailto:bzg@gnu.org,contact the maintainer} + +#+options: H:4 num:t toc:t author:t \n:nil ::t |:t ^:nil -:t f:t *:t <:t e:t ':t +#+options: d:nil todo:nil pri:nil tags:not-in-toc stat:nil broken-links:mark +#+select_tags: export +#+exclude_tags: noexport + +#+macro: cite @@texinfo:@cite{@@$1@@texinfo:}@@ +#+macro: var @@texinfo:@var{@@$1@@texinfo:}@@ + +# The "version" macro extracts "Version" keyword from "org.el". It +# returns major.minor version number. This is sufficient since bugfix +# releases are not expected to add features and therefore imply manual +# modifications. +#+macro: version (eval (with-current-buffer (find-file-noselect "../lisp/org.el") (org-with-point-at 1 (if (re-search-forward "Version: +\\([0-9.]+\\)" nil t) (mapconcat #'identity (cl-subseq (split-string (match-string-no-properties 1) "\\.") 0 2) ".") (error "Missing \"Version\" keyword in \"org.el\""))))) + +# The "kbd" macro turns KBD into @kbd{KBD}. Additionally, it +# encloses case-sensitive special keys (SPC, RET...) within @key{...}. +#+macro: kbd (eval (let ((case-fold-search nil) (regexp (regexp-opt '("SPC" "RET" "LFD" "TAB" "BS" "ESC" "DELETE" "SHIFT" "Ctrl" "Meta" "Alt" "Cmd" "Super" "UP" "LEFT" "RIGHT" "DOWN") 'words))) (format "@@texinfo:@kbd{@@%s@@texinfo:}@@" (replace-regexp-in-string regexp "@@texinfo:@key{@@\\&@@texinfo:}@@" $1 t)))) + diff --git a/elpa/org-9.5.2/doc/fdl.org b/elpa/org-9.5.2/doc/fdl.org new file mode 100644 index 0000000..2cc082b --- /dev/null +++ b/elpa/org-9.5.2/doc/fdl.org @@ -0,0 +1,490 @@ +# The GNU Free Documentation License. +#+begin_center +Version 1.3, 3 November 2008 +#+end_center + +# This file is intended to be included within another document. + +#+begin_verse +Copyright \copy{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. +https://fsf.org/ + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. +#+end_verse + +0. [@0] PREAMBLE + + The purpose of this License is to make a manual, textbook, or other + functional and useful document @@texinfo:@dfn{@@free@@texinfo:}@@ + in the sense of freedom: to assure everyone the effective freedom + to copy and redistribute it, with or without modifying it, either + commercially or noncommercially. Secondarily, this License + preserves for the author and publisher a way to get credit for + their work, while not being considered responsible for + modifications made by others. + + This License is a kind of "copyleft", which means that derivative + works of the document must themselves be free in the same sense. + It complements the GNU General Public License, which is a copyleft + license designed for free software. + + We have designed this License in order to use it for manuals for + free software, because free software needs free documentation: + a free program should come with manuals providing the same freedoms + that the software does. But this License is not limited to + software manuals; it can be used for any textual work, regardless + of subject matter or whether it is published as a printed book. We + recommend this License principally for works whose purpose is + instruction or reference. + +1. APPLICABILITY AND DEFINITIONS + + This License applies to any manual or other work, in any medium, + that contains a notice placed by the copyright holder saying it can + be distributed under the terms of this License. Such a notice + grants a world-wide, royalty-free license, unlimited in duration, + to use that work under the conditions stated herein. The + "Document", below, refers to any such manual or work. Any member + of the public is a licensee, and is addressed as "you". You accept + the license if you copy, modify or distribute the work in a way + requiring permission under copyright law. + + A "Modified Version" of the Document means any work containing the + Document or a portion of it, either copied verbatim, or with + modifications and/or translated into another language. + + A "Secondary Section" is a named appendix or a front-matter section + of the Document that deals exclusively with the relationship of the + publishers or authors of the Document to the Document's overall + subject (or to related matters) and contains nothing that could + fall directly within that overall subject. (Thus, if the Document + is in part a textbook of mathematics, a Secondary Section may not + explain any mathematics.) The relationship could be a matter of + historical connection with the subject or with related matters, or + of legal, commercial, philosophical, ethical or political position + regarding them. + + The "Invariant Sections" are certain Secondary Sections whose + titles are designated, as being those of Invariant Sections, in the + notice that says that the Document is released under this License. + If a section does not fit the above definition of Secondary then it + is not allowed to be designated as Invariant. The Document may + contain zero Invariant Sections. If the Document does not identify + any Invariant Sections then there are none. + + The "Cover Texts" are certain short passages of text that are + listed, as Front-Cover Texts or Back-Cover Texts, in the notice + that says that the Document is released under this License. + A Front-Cover Text may be at most 5 words, and a Back-Cover Text + may be at most 25 words. + + A "Transparent" copy of the Document means a machine-readable copy, + represented in a format whose specification is available to the + general public, that is suitable for revising the document + straightforwardly with generic text editors or (for images composed + of pixels) generic paint programs or (for drawings) some widely + available drawing editor, and that is suitable for input to text + formatters or for automatic translation to a variety of formats + suitable for input to text formatters. A copy made in an otherwise + Transparent file format whose markup, or absence of markup, has + been arranged to thwart or discourage subsequent modification by + readers is not Transparent. An image format is not Transparent if + used for any substantial amount of text. A copy that is not + "Transparent" is called "Opaque". + + Examples of suitable formats for Transparent copies include plain + ASCII without markup, Texinfo input format, LaTeX input format, + SGML or XML using a publicly available DTD, and standard-conforming + simple HTML, PostScript or PDF designed for human modification. + Examples of transparent image formats include PNG, XCF and JPG. + Opaque formats include proprietary formats that can be read and + edited only by proprietary word processors, SGML or XML for which + the DTD and/or processing tools are not generally available, and + the machine-generated HTML, PostScript or PDF produced by some word + processors for output purposes only. + + The "Title Page" means, for a printed book, the title page itself, + plus such following pages as are needed to hold, legibly, the + material this License requires to appear in the title page. For + works in formats which do not have any title page as such, "Title + Page" means the text near the most prominent appearance of the + work's title, preceding the beginning of the body of the text. + + The "publisher" means any person or entity that distributes copies + of the Document to the public. + + A section "Entitled XYZ" means a named subunit of the Document + whose title either is precisely XYZ or contains XYZ in parentheses + following text that translates XYZ in another language. (Here XYZ + stands for a specific section name mentioned below, such as + "Acknowledgements", "Dedications", "Endorsements", or "History".) + To "Preserve the Title" of such a section when you modify the + Document means that it remains a section "Entitled XYZ" according + to this definition. + + The Document may include Warranty Disclaimers next to the notice + which states that this License applies to the Document. These + Warranty Disclaimers are considered to be included by reference in + this License, but only as regards disclaiming warranties: any other + implication that these Warranty Disclaimers may have is void and + has no effect on the meaning of this License. + +2. VERBATIM COPYING + + You may copy and distribute the Document in any medium, either + commercially or noncommercially, provided that this License, the + copyright notices, and the license notice saying this License + applies to the Document are reproduced in all copies, and that you + add no other conditions whatsoever to those of this License. You + may not use technical measures to obstruct or control the reading + or further copying of the copies you make or distribute. However, + you may accept compensation in exchange for copies. If you + distribute a large enough number of copies you must also follow the + conditions in section 3. + + You may also lend copies, under the same conditions stated above, + and you may publicly display copies. + +3. COPYING IN QUANTITY + + If you publish printed copies (or copies in media that commonly + have printed covers) of the Document, numbering more than 100, and + the Document's license notice requires Cover Texts, you must + enclose the copies in covers that carry, clearly and legibly, all + these Cover Texts: Front-Cover Texts on the front cover, and + Back-Cover Texts on the back cover. Both covers must also clearly + and legibly identify you as the publisher of these copies. The + front cover must present the full title with all words of the title + equally prominent and visible. You may add other material on the + covers in addition. Copying with changes limited to the covers, as + long as they preserve the title of the Document and satisfy these + conditions, can be treated as verbatim copying in other respects. + + If the required texts for either cover are too voluminous to fit + legibly, you should put the first ones listed (as many as fit + reasonably) on the actual cover, and continue the rest onto + adjacent pages. + + If you publish or distribute Opaque copies of the Document + numbering more than 100, you must either include a machine-readable + Transparent copy along with each Opaque copy, or state in or with + each Opaque copy a computer-network location from which the general + network-using public has access to download using public-standard + network protocols a complete Transparent copy of the Document, free + of added material. If you use the latter option, you must take + reasonably prudent steps, when you begin distribution of Opaque + copies in quantity, to ensure that this Transparent copy will + remain thus accessible at the stated location until at least one + year after the last time you distribute an Opaque copy (directly or + through your agents or retailers) of that edition to the public. + + It is requested, but not required, that you contact the authors of + the Document well before redistributing any large number of copies, + to give them a chance to provide you with an updated version of the + Document. + +4. MODIFICATIONS + + You may copy and distribute a Modified Version of the Document + under the conditions of sections 2 and 3 above, provided that you + release the Modified Version under precisely this License, with the + Modified Version filling the role of the Document, thus licensing + distribution and modification of the Modified Version to whoever + possesses a copy of it. In addition, you must do these things in + the Modified Version: + + #+attr_texinfo: :enum A + 1. Use in the Title Page (and on the covers, if any) a title + distinct from that of the Document, and from those of previous + versions (which should, if there were any, be listed in the + History section of the Document). You may use the same title as + a previous version if the original publisher of that version + gives permission. + + 2. List on the Title Page, as authors, one or more persons or + entities responsible for authorship of the modifications in the + Modified Version, together with at least five of the principal + authors of the Document (all of its principal authors, if it has + fewer than five), unless they release you from this requirement. + + 3. State on the Title page the name of the publisher of the + Modified Version, as the publisher. + + 4. Preserve all the copyright notices of the Document. + + 5. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. + + 6. Include, immediately after the copyright notices, a license + notice giving the public permission to use the Modified Version + under the terms of this License, in the form shown in the + Addendum below. + + 7. Preserve in that license notice the full lists of Invariant + Sections and required Cover Texts given in the Document's + license notice. + + 8. Include an unaltered copy of this License. + + 9. Preserve the section Entitled "History", Preserve its Title, and + add to it an item stating at least the title, year, new authors, + and publisher of the Modified Version as given on the Title + Page. If there is no section Entitled "History" in the Document, + create one stating the title, year, authors, and publisher of + the Document as given on its Title Page, then add an item + describing the Modified Version as stated in the previous + sentence. + + 10. Preserve the network location, if any, given in the Document + for public access to a Transparent copy of the Document, and + likewise the network locations given in the Document for + previous versions it was based on. These may be placed in the + "History" section. You may omit a network location for a work + that was published at least four years before the Document + itself, or if the original publisher of the version it refers + to gives permission. + + 11. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the section + all the substance and tone of each of the contributor + acknowledgements and/or dedications given therein. + + 12. Preserve all the Invariant Sections of the Document, unaltered + in their text and in their titles. Section numbers or the + equivalent are not considered part of the section titles. + + 13. Delete any section Entitled "Endorsements". Such a section may + not be included in the Modified Version. + + 14. Do not retitle any existing section to be Entitled + "Endorsements" or to conflict in title with any Invariant + Section. + + 15. Preserve any Warranty Disclaimers. + + If the Modified Version includes new front-matter sections or + appendices that qualify as Secondary Sections and contain no material + copied from the Document, you may at your option designate some or all + of these sections as invariant. To do this, add their titles to the + list of Invariant Sections in the Modified Version's license notice. + These titles must be distinct from any other section titles. + + You may add a section Entitled "Endorsements", provided it contains + nothing but endorsements of your Modified Version by various + parties---for example, statements of peer review or that the text has + been approved by an organization as the authoritative definition of a + standard. + + You may add a passage of up to five words as a Front-Cover Text, and a + passage of up to 25 words as a Back-Cover Text, to the end of the list + of Cover Texts in the Modified Version. Only one passage of + Front-Cover Text and one of Back-Cover Text may be added by (or + through arrangements made by) any one entity. If the Document already + includes a cover text for the same cover, previously added by you or + by arrangement made by the same entity you are acting on behalf of, + you may not add another; but you may replace the old one, on explicit + permission from the previous publisher that added the old one. + + The author(s) and publisher(s) of the Document do not by this License + give permission to use their names for publicity for or to assert or + imply endorsement of any Modified Version. + +5. COMBINING DOCUMENTS + + You may combine the Document with other documents released under + this License, under the terms defined in section 4 above for + modified versions, provided that you include in the combination all + of the Invariant Sections of all of the original documents, + unmodified, and list them all as Invariant Sections of your + combined work in its license notice, and that you preserve all + their Warranty Disclaimers. + + The combined work need only contain one copy of this License, and + multiple identical Invariant Sections may be replaced with a single + copy. If there are multiple Invariant Sections with the same name + but different contents, make the title of each such section unique + by adding at the end of it, in parentheses, the name of the + original author or publisher of that section if known, or else + a unique number. Make the same adjustment to the section titles in + the list of Invariant Sections in the license notice of the + combined work. + + In the combination, you must combine any sections Entitled + "History" in the various original documents, forming one section + Entitled "History"; likewise combine any sections Entitled + "Acknowledgements", and any sections Entitled "Dedications". You + must delete all sections Entitled "Endorsements." + +6. COLLECTIONS OF DOCUMENTS + + You may make a collection consisting of the Document and other + documents released under this License, and replace the individual + copies of this License in the various documents with a single copy + that is included in the collection, provided that you follow the + rules of this License for verbatim copying of each of the documents + in all other respects. + + You may extract a single document from such a collection, and + distribute it individually under this License, provided you insert + a copy of this License into the extracted document, and follow this + License in all other respects regarding verbatim copying of that + document. + +7. AGGREGATION WITH INDEPENDENT WORKS + + A compilation of the Document or its derivatives with other + separate and independent documents or works, in or on a volume of + a storage or distribution medium, is called an "aggregate" if the + copyright resulting from the compilation is not used to limit the + legal rights of the compilation's users beyond what the individual + works permit. When the Document is included in an aggregate, this + License does not apply to the other works in the aggregate which + are not themselves derivative works of the Document. + + If the Cover Text requirement of section 3 is applicable to these + copies of the Document, then if the Document is less than one half + of the entire aggregate, the Document's Cover Texts may be placed + on covers that bracket the Document within the aggregate, or the + electronic equivalent of covers if the Document is in electronic + form. Otherwise they must appear on printed covers that bracket + the whole aggregate. + +8. TRANSLATION + + Translation is considered a kind of modification, so you may + distribute translations of the Document under the terms of + section 4. Replacing Invariant Sections with translations requires + special permission from their copyright holders, but you may + include translations of some or all Invariant Sections in addition + to the original versions of these Invariant Sections. You may + include a translation of this License, and all the license notices + in the Document, and any Warranty Disclaimers, provided that you + also include the original English version of this License and the + original versions of those notices and disclaimers. In case of + a disagreement between the translation and the original version of + this License or a notice or disclaimer, the original version will + prevail. + + If a section in the Document is Entitled "Acknowledgements", + "Dedications", or "History", the requirement (section 4) to + Preserve its Title (section 1) will typically require changing the + actual title. + +9. TERMINATION + + You may not copy, modify, sublicense, or distribute the Document + except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense, or distribute it is void, + and will automatically terminate your rights under this License. + + However, if you cease all violation of this License, then your + license from a particular copyright holder is reinstated (a) + provisionally, unless and until the copyright holder explicitly and + finally terminates your license, and (b) permanently, if the + copyright holder fails to notify you of the violation by some + reasonable means prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from + that copyright holder, and you cure the violation prior to 30 days + after your receipt of the notice. + + Termination of your rights under this section does not terminate + the licenses of parties who have received copies or rights from you + under this License. If your rights have been terminated and not + permanently reinstated, receipt of a copy of some or all of the + same material does not give you any rights to use it. + +10. FUTURE REVISIONS OF THIS LICENSE + + The Free Software Foundation may publish new, revised versions of + the GNU Free Documentation License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. See + https://www.gnu.org/copyleft/. + + Each version of the License is given a distinguishing version + number. If the Document specifies that a particular numbered + version of this License "or any later version" applies to it, you + have the option of following the terms and conditions either of + that specified version or of any later version that has been + published (not as a draft) by the Free Software Foundation. If + the Document does not specify a version number of this License, + you may choose any version ever published (not as a draft) by the + Free Software Foundation. If the Document specifies that a proxy + can decide which future versions of this License can be used, that + proxy's public statement of acceptance of a version permanently + authorizes you to choose that version for the Document. + +11. RELICENSING + + "Massive Multiauthor Collaboration Site" (or "MMC Site") means any + World Wide Web server that publishes copyrightable works and also + provides prominent facilities for anybody to edit those works. + A public wiki that anybody can edit is an example of such + a server. A "Massive Multiauthor Collaboration" (or "MMC") + contained in the site means any set of copyrightable works thus + published on the MMC site. + + "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 + license published by Creative Commons Corporation, + a not-for-profit corporation with a principal place of business in + San Francisco, California, as well as future copyleft versions of + that license published by that same organization. + + "Incorporate" means to publish or republish a Document, in whole + or in part, as part of another Document. + + An MMC is "eligible for relicensing" if it is licensed under this + License, and if all works that were first published under this + License somewhere other than this MMC, and subsequently + incorporated in whole or in part into the MMC, (1) had no cover + texts or invariant sections, and (2) were thus incorporated prior + to November 1, 2008. + + The operator of an MMC Site may republish an MMC contained in the + site under CC-BY-SA on the same site at any time before August 1, + 2009, provided the MMC is eligible for relicensing. + +#+texinfo: @page + +* ADDENDUM: How to use this License for your documents +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + +#+begin_example + Copyright (C) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. +#+end_example + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the "with...Texts."\nbsp{}line with this: + +#+begin_example + with the Invariant Sections being LIST THEIR TITLES, with + the Front-Cover Texts being LIST, and with the Back-Cover Texts + being LIST. +#+end_example + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, to +permit their use in free software. + diff --git a/elpa/org-9.5.2/doc/htmlxref.cnf b/elpa/org-9.5.2/doc/htmlxref.cnf new file mode 100644 index 0000000..a5eb584 --- /dev/null +++ b/elpa/org-9.5.2/doc/htmlxref.cnf @@ -0,0 +1,2 @@ +calc mono https://www.gnu.org/software/emacs/manual/html_mono/calc.html +calc node https://www.gnu.org/software/emacs/manual/html_node/calc/ diff --git a/elpa/org-9.5.2/doc/org-guide.org b/elpa/org-9.5.2/doc/org-guide.org new file mode 100644 index 0000000..aa793f1 --- /dev/null +++ b/elpa/org-9.5.2/doc/org-guide.org @@ -0,0 +1,2654 @@ +#+title: Org Mode Compact Guide +#+subtitle: Release {{{version}}} +#+author: The Org Mode Developers +#+language: en + +#+texinfo: @insertcopying + +* Copying +:PROPERTIES: +:copying: t +:END: + +Copyright \copy 2004--2021 Free Software Foundation, Inc. + +#+begin_quote +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, with the Front-Cover Texts being "A GNU Manual," +and with the Back-Cover Texts as in (a) below. A copy of the license +is included in the section entitled "GNU Free Documentation License." +in the full Org manual, which is distributed together with this +compact guide. + +(a) The FSF's Back-Cover Text is: "You have the freedom to copy and +modify this GNU manual." +#+end_quote + +* Introduction +:PROPERTIES: +:DESCRIPTION: Welcome! +:END: + +Org is a mode for keeping notes, maintaining TODO lists, and doing +project planning with a fast and effective plain-text system. It is +also an authoring and publishing system, and it supports working with +source code for literal programming and reproducible research. + +This document is a much compressed derivative of the [[info:org][comprehensive Org +mode manual]]. It contains all basic features and commands, along with +important hints for customization. It is intended for beginners who +would shy back from a 200 pages manual because of sheer size. + +** Installation +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+attr_texinfo: :tag Important +#+begin_quote +If you are using a version of Org that is part of the Emacs +distribution, please skip this section and go directly to [[*Activation]]. +#+end_quote + +If you have downloaded Org from the web, either as a distribution +=.zip= or =.tar= file, or as a Git archive, it is best to run it +directly from the distribution directory. You need to add the =lisp/= +subdirectories to the Emacs load path. To do this, add the following +line to your Emacs init file: + +: (add-to-list 'load-path "~/path/to/orgdir/lisp") + +#+texinfo: @noindent +If you have been using git or a tar ball to get Org, you need to run +the following command to generate autoload information. + +: make autoloads + +** Activation +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Add the following lines to your Emacs init file to define /global/ +keys for three commands that are useful in any Emacs buffer, not just +Org buffers. Please choose suitable keys yourself. + +#+begin_src emacs-lisp +(global-set-key (kbd "C-c l") #'org-store-link) +(global-set-key (kbd "C-c a") #'org-agenda) +(global-set-key (kbd "C-c c") #'org-capture) +#+end_src + +Files with extension =.org= will be put into Org mode automatically. + +** Feedback +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +If you find problems with Org, or if you have questions, remarks, or +ideas about it, please mail to the Org mailing list +mailto:emacs-orgmode@gnu.org. For information on how to submit bug +reports, see the main manual. + +* Document Structure +:PROPERTIES: +:DESCRIPTION: A tree works like your brain. +:END: + +Org is an outliner. Outlines allow a document to be organized in +a hierarchical structure, which, least for me, is the best +representation of notes and thoughts. An overview of this structure +is achieved by folding, i.e., hiding large parts of the document to +show only the general document structure and the parts currently being +worked on. Org greatly simplifies the use of outlines by compressing +the entire show and hide functionalities into a single command, +~org-cycle~, which is bound to the {{{kbd(TAB)}}} key. + +** Headlines +:PROPERTIES: +:DESCRIPTION: How to typeset Org tree nodes. +:END: + +Headlines define the structure of an outline tree. The headlines in +Org start on the left margin[fn:1] with one or more stars followed by +a space. For example: + +#+begin_example +,* Top level headline +,** Second level +,*** Third level + some text +,*** Third level + more text +,* Another top level headline +#+end_example + +Note that a headline named after ~org-footnote-section~, which +defaults to =Footnotes=, is considered as special. A subtree with +this headline will be silently ignored by exporting functions. + +Some people find the many stars too noisy and would prefer an outline +that has whitespace followed by a single star as headline starters. +See [[*Miscellaneous]] for a setup to realize this. + +** Visibility Cycling +:PROPERTIES: +:DESCRIPTION: Show and hide, much simplified. +:END: + +Outlines make it possible to hide parts of the text in the buffer. +Org uses just two commands, bound to {{{kbd(TAB)}}} and +{{{kbd{S-TAB)}}} to change the visibility in the buffer. + +#+attr_texinfo: :sep , +- {{{kbd(TAB)}}} :: + + /Subtree cycling/: Rotate current subtree among the states + + : ,-> FOLDED -> CHILDREN -> SUBTREE --. + : '-----------------------------------' + + When called with a prefix argument ({{{kbd(C-u TAB)}}}), or with the + Shift key, global cycling is invoked. + +- {{{kbd(S-TAB)}}}, {{{kbd(C-u TAB)}}} :: + + /Global cycling/: Rotate the entire buffer among the states + + : ,-> OVERVIEW -> CONTENTS -> SHOW ALL --. + : '--------------------------------------' + +- {{{kbd(C-u C-u C-u TAB)}}} :: + + Show all, including drawers. + +When Emacs first visits an Org file, the global state is set to +OVERVIEW, i.e., only the top level headlines are visible. This can be +configured through the variable ~org-startup-folded~, or on a per-file +basis by adding a =STARTUP= keyword to =overview=, =content=, +=showall=, =showeverything= or =showlevels= (n = 2..5) like this: + +: #+STARTUP: content + +** Motion +:PROPERTIES: +:DESCRIPTION: Jumping to other headlines. +:END: + +The following commands jump to other headlines in the buffer. + +- {{{kbd(C-c C-n)}}} :: Next heading. + +- {{{kbd(C-c C-p)}}} :: Previous heading. + +- {{{kbd(C-c C-f)}}} :: Next heading same level. + +- {{{kbd(C-c C-b)}}} :: Previous heading same level. + +- {{{kbd(C-c C-u)}}} :: Backward to higher level heading. + +** Structure Editing +:PROPERTIES: +:DESCRIPTION: Changing sequence and level of headlines. +:END: + +#+attr_texinfo: :sep , +- {{{kbd(M-RET)}}} :: + + Insert new heading with same level as current. If point is in + a plain list item, a new item is created (see [[Plain Lists]]). When + this command is used in the middle of a line, the line is split and + the rest of the line becomes the new headline[fn:2]. + +- {{{kbd(M-S-RET)}}} :: + + Insert new TODO entry with same level as current heading. + +- {{{kbd(TAB)}}} in new, empty entry :: + + In a new entry with no text yet, {{{kbd(TAB)}}} cycles through + reasonable levels. + +- {{{kbd(M-LEFT)}}}, {{{kbd(M-RIGHT)}}} :: + + Promote or demote current heading by one level. + +- {{{kbd(M-UP)}}}, {{{kbd(M-DOWN)}}} :: + + Move subtree up or down, i.e., swap with previous or next subtree of + same level. + +- {{{kbd(C-c C-w)}}} :: + + Refile entry or region to a different location. See [[*Refile and + Copy]]. + +- {{{kbd(C-x n s)}}}, {{{kbd(C-x n w)}}} :: + + Narrow buffer to current subtree and widen it again. + +When there is an active region (Transient Mark mode), promotion and +demotion work on all headlines in the region. + +** Sparse Trees +:PROPERTIES: +:DESCRIPTION: Matches embedded in context. +:END: + +An important feature of Org mode is the ability to construct /sparse +trees/ for selected information in an outline tree, so that the entire +document is folded as much as possible, but the selected information +is made visible along with the headline structure above it[fn:3]. +Just try it out and you will see immediately how it works. + +Org mode contains several commands creating such trees, all these +commands can be accessed through a dispatcher: + +- {{{kbd(C-c /)}}} :: + + This prompts for an extra key to select a sparse-tree creating + command. + +- {{{kbd(C-c / r)}}} :: + + Occur. Prompts for a regexp and shows a sparse tree with all + matches. Each match is also highlighted; the highlights disappear + by pressing {{{kbd(C-c C-c)}}}. + + The other sparse tree commands select headings based on TODO + keywords, tags, or properties and will be discussed later in this + manual. + +** Plain Lists +:PROPERTIES: +:DESCRIPTION: Additional structure within an entry. +:END: + +Within an entry of the outline tree, hand-formatted lists can provide +additional structure. They also provide a way to create lists of +checkboxes (see [[*Checkboxes]]). Org supports editing such lists, and +every exporter (see [[*Exporting]]) can parse and format them. + +Org knows ordered lists, unordered lists, and description lists. + +#+attr_texinfo: :indic @bullet +- /Unordered/ list items start with =-=, =+=, or =*= as bullets. + +- /Ordered/ list items start with =1.=, or =1)=. + +- /Description/ list use =::= to separate the /term/ from the + description. + +Items belonging to the same list must have the same indentation on the +first line. An item ends before the next line that is indented like +its bullet/number, or less. A list ends when all items are closed, or +before two blank lines. An example: + +#+begin_example +,* Lord of the Rings + My favorite scenes are (in this order) + 1. The attack of the Rohirrim + 2. Eowyn's fight with the witch king + + this was already my favorite scene in the book + + I really like Miranda Otto. + Important actors in this film are: + - Elijah Wood :: He plays Frodo + - Sean Astin :: He plays Sam, Frodo's friend. +#+end_example + +The following commands act on items when point is in the first line of +an item (the line with the bullet or number). + +#+attr_texinfo: :sep , +- {{{kbd(TAB)}}} :: + + Items can be folded just like headline levels. + +- {{{kbd(M-RET)}}} :: + + Insert new item at current level. With a prefix argument, force + a new heading (see [[*Structure Editing]]). + +- {{{kbd(M-S-RET)}}} :: + + Insert a new item with a checkbox (see [[*Checkboxes]]). + +- {{{kbd(M-S-UP)}}}, {{{kbd(M-S-DOWN)}}} :: + + Move the item including subitems up/down (swap with previous/next + item of same indentation). If the list is ordered, renumbering is + automatic. + +- {{{kbd(M-LEFT)}}}, {{{kbd(M-RIGHT)}}} :: + + Decrease/increase the indentation of an item, leaving children + alone. + +- {{{kbd(M-S-LEFT)}}}, {{{kbd(M-S-RIGHT)}}} :: + + Decrease/increase the indentation of the item, including subitems. + +- {{{kbd(C-c C-c)}}} :: + + If there is a checkbox (see [[*Checkboxes]]) in the item line, toggle + the state of the checkbox. Also verify bullets and indentation + consistency in the whole list. + +- {{{kbd(C-c -)}}} :: + + Cycle the entire list level through the different itemize/enumerate + bullets (=-=, =+=, =*=, =1.=, =1)=). + +* Tables +:PROPERTIES: +:DESCRIPTION: Pure magic for quick formatting. +:END: + +Org comes with a fast and intuitive table editor. Spreadsheet-like +calculations are supported in connection with the Emacs Calc package +(see [[info:calc][GNU Emacs Calculator Manual]]). + +Org makes it easy to format tables in plain ASCII. Any line with =|= +as the first non-whitespace character is considered part of a table. +=|= is also the column separator. A table might look like this: + +#+begin_example +| Name | Phone | Age | +|-------+-------+-----| +| Peter | 1234 | 17 | +| Anna | 4321 | 25 | +#+end_example + +A table is re-aligned automatically each time you press {{{kbd(TAB)}}} +or {{{kbd(RET)}}} or {{{kbd(C-c C-c)}}} inside the table. +{{{kbd(TAB)}}} also moves to the next field ({{{kbd(RET)}}} to the +next row) and creates new table rows at the end of the table or before +horizontal lines. The indentation of the table is set by the first +line. Any line starting with =|-= is considered as a horizontal +separator line and will be expanded on the next re-align to span the +whole table width. So, to create the above table, you would only type + +: |Name|Phone|Age| +: |- + +#+texinfo: @noindent +and then press {{{kbd(TAB)}}} to align the table and start filling in +fields. Even faster would be to type =|Name|Phone|Age= followed by +{{{kbd(C-c RET)}}}. + +When typing text into a field, Org treats {{{kbd(DEL)}}}, +{{{kbd(Backspace)}}}, and all character keys in a special way, so that +inserting and deleting avoids shifting other fields. Also, when +typing /immediately after point was moved into a new field with +{{{kbd(TAB)}}}, {{{kbd(S-TAB)}}} or {{{kbd(RET)}}}/, the field is +automatically made blank. + +** Creation and conversion +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c |)}}} :: + + Convert the active region to table. If every line contains at least + one {{{kbd(TAB)}}} character, the function assumes that the material + is tab separated. If every line contains a comma, comma-separated + values (CSV) are assumed. If not, lines are split at whitespace + into fields. + + If there is no active region, this command creates an empty Org + table. But it is easier just to start typing, like {{{kbd(| + N a m e | P h o n e | A g e RET | - TAB)}}}. + +** Re-aligning and field motion +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-c)}}} :: + + Re-align the table without moving point. + +- {{{kbd(TAB)}}} :: + + Re-align the table, move to the next field. Creates a new row if + necessary. + +- {{{kbd(S-TAB)}}} :: + + Re-align, move to previous field. + +- {{{kbd(RET)}}} :: + + Re-align the table and move down to next row. Creates a new row if + necessary. + +- {{{kbd(S-UP)}}}, {{{kbd(S-DOWN)}}}, {{{kbd(S-LEFT)}}}, {{{kbd(S-RIGHT)}}} :: + + Move a cell up, down, left, and right by swapping with adjacent + cell. + +** Column and row editing +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(M-LEFT)}}}, {{{kbd(M-RIGHT)}}} :: + + Move the current column left/right. + +- {{{kbd(M-S-LEFT)}}} :: + + Kill the current column. + +- {{{kbd(M-S-RIGHT)}}} :: + + Insert a new column to the left of point position. + +- {{{kbd(M-UP)}}}, {{{kbd(M-DOWN)}}} :: + + Move the current row up/down. + +- {{{kbd(M-S-UP)}}} :: + + Kill the current row or horizontal line. + +- {{{kbd(M-S-DOWN)}}} :: + + Insert a new row above the current row. With a prefix argument, the + line is created below the current one. + +- {{{kbd(C-c -)}}} :: + + Insert a horizontal line below current row. With a prefix argument, + the line is created above the current line. + +- {{{kbd(C-c RET)}}} :: + + Insert a horizontal line below current row, and move the point into + the row below that line. + +- {{{kbd(C-c ^)}}} :: + + Sort the table lines in the region. The position of point indicates + the column to be used for sorting, and the range of lines is the + range between the nearest horizontal separator lines, or the entire + table. + +* Hyperlinks +:PROPERTIES: +:DESCRIPTION: Notes in context. +:END: + +Like HTML, Org provides links inside a file, external links to other +files, Usenet articles, emails, and much more. + +Org recognizes plain URIs, possibly wrapped within angle brackets, and +activate them as clickable links. The general link format, however, +looks like this: + +: [[LINK][DESCRIPTION]] + +#+texinfo: @noindent +or alternatively + +: [[LINK]] + +Once a link in the buffer is complete, with all brackets present, Org +changes the display so that =DESCRIPTION= is displayed instead of +=[[LINK][DESCRIPTION]]= and =LINK= is displayed instead of =[[LINK]]=. +To edit the invisible {{{var(LINK)}}} part, use {{{kbd(C-c C-l)}}} +with the point on the link. + +** Internal links +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +If the link does not look like a URL, it is considered to be internal +in the current file. The most important case is a link like +=[[#my-custom-id]]= which links to the entry with the =CUSTOM_ID= property +=my-custom-id=. + +Links such as =[[My Target]]= or =[[My Target][Find my target]]= lead +to a text search in the current file for the corresponding target, +which looks like =<>=. + +** External Links +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org supports links to files, websites, Usenet and email messages, BBDB +database entries and links to both IRC conversations and their logs. +External links are URL-like locators. They start with a short +identifying string followed by a colon. There can be no space after +the colon. Here are some examples: + +| =http://www.astro.uva.nl/=dominik= | on the web | +| =file:/home/dominik/images/jupiter.jpg= | file, absolute path | +| =/home/dominik/images/jupiter.jpg= | same as above | +| =file:papers/last.pdf= | file, relative path | +| =./papers/last.pdf= | same as above | +| =file:projects.org= | another Org file | +| =docview:papers/last.pdf::NNN= | open in DocView mode at page {{{var(NNN)}}} | +| =id:B7423F4D-2E8A-471B-8810-C40F074717E9= | link to heading by ID | +| =news:comp.emacs= | Usenet link | +| =mailto:adent@galaxy.net= | mail link | +| =mhe:folder#id= | MH-E message link | +| =rmail:folder#id= | Rmail message link | +| =gnus:group#id= | Gnus article link | +| =bbdb:R.*Stallman= | BBDB link (with regexp) | +| =irc:/irc.com/#emacs/bob= | IRC link | +| =info:org#Hyperlinks= | Info node link | + +File links can contain additional information to make Emacs jump to +a particular location in the file when following a link. This can be +a line number or a search option after a double colon. Here are a few +examples,, together with an explanation: + +| =file:~/code/main.c::255= | Find line 255 | +| =file:~/xx.org::My Target= | Find =<>= | +| =[[file:~/xx.org::#my-custom-id]]= | Find entry with a custom ID | + +** Handling Links +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org provides methods to create a link in the correct syntax, to insert +it into an Org file, and to follow the link. + +The main function is ~org-store-link~, called with {{{kbd(M-x +org-store-link)}}}. Because of its importance, we suggest to bind it +to a widely available key (see [[*Activation]]). It stores a link to the +current location. The link is stored for later insertion into an Org +buffer---see below. + +From an Org buffer, the following commands create, navigate or, more +generally, act on links. + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-l)}}} :: + + Insert a link. This prompts for a link to be inserted into the + buffer. You can just type a link, or use history keys {{{kbd(UP)}}} + and {{{kbd(DOWN)}}} to access stored links. You will be prompted + for the description part of the link. + + When called with a {{{kbd(C-u)}}} prefix argument, file name + completion is used to link to a file. + +- {{{kbd(C-c C-l)}}} (with point on existing link) :: + + When point is on an existing link, {{{kbd(C-c C-l)}}} allows you to + edit the link and description parts of the link. + +- {{{kbd(C-c C-o)}}} :: + + Open link at point. + +- {{{kbd(C-c &)}}} :: + + Jump back to a recorded position. A position is recorded by the + commands following internal links, and by {{{kbd(C-c %)}}}. Using + this command several times in direct succession moves through a ring + of previously recorded positions. + +* TODO Items +:PROPERTIES: +:DESCRIPTION: Every tree branch can be a TODO item. +:END: + +Org mode does not require TODO lists to live in separate documents. +Instead, TODO items are part of a notes file, because TODO items +usually come up while taking notes! With Org mode, simply mark any +entry in a tree as being a TODO item. In this way, information is not +duplicated, and TODO items remain in the context from which they +emerged. + +Org mode provides methods to give you an overview of all the things +that you have to do, collected from many files. + +** Basic TODO Functionality +:PROPERTIES: +:DESCRIPTION: Marking and displaying TODO entries. +:ALT_TITLE: TODO Basics +:END: + +Any headline becomes a TODO item when it starts with the word =TODO=, +for example: + +: *** TODO Write letter to Sam Fortune + +The most important commands to work with TODO entries are: + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-t)}}} :: + + Rotate the TODO state of the current item among + + : ,-> (unmarked) -> TODO -> DONE --. + : '--------------------------------' + + The same rotation can also be done "remotely" from the agenda buffer + with the {{{kbd(t)}}} command key (see [[*Commands in the Agenda + Buffer]]). + +- {{{kbd(S-RIGHT)}}}, {{{kbd(S-LEFT)}}} :: + + Select the following/preceding TODO state, similar to cycling. + +- {{{kbd(C-c / t)}}} :: + + View TODO items in a /sparse tree/ (see [[*Sparse Trees]]). Folds the + entire buffer, but shows all TODO items---with not-DONE state---and + the headings hierarchy above them. + +- {{{kbd(M-x org-agenda t)}}} :: + + Show the global TODO list. Collects the TODO items (with not-DONE + states) from all agenda files (see [[*Agenda Views]]) into a single + buffer. See [[*The Global TODO List]], for more information. + +- {{{kbd(S-M-RET)}}} :: + + Insert a new TODO entry below the current one. + +Changing a TODO state can also trigger tag changes. See the docstring +of the option ~org-todo-state-tags-triggers~ for details. + +** Multi-state Workflow +:PROPERTIES: +:DESCRIPTION: More than just on/off. +:END: + +You can use TODO keywords to indicate @emph{sequential} working progress +states: + +#+begin_src emacs-lisp +(setq org-todo-keywords + '((sequence "TODO" "FEEDBACK" "VERIFY" "|" "DONE" "DELEGATED"))) +#+end_src + +#+texinfo: @noindent +The vertical bar separates the =TODO= keywords (states that /need +action/) from the =DONE= states (which need /no further action/). If +you do not provide the separator bar, the last state is used as the +=DONE= state. With this setup, the command {{{kbd(C-c C-t)}}} cycles +an entry from =TODO= to =FEEDBACK=, then to =VERIFY=, and finally to +=DONE= and =DELEGATED=. + +Sometimes you may want to use different sets of TODO keywords in +parallel. For example, you may want to have the basic =TODO=/=DONE=, +but also a workflow for bug fixing. Your setup would then look like +this: + +#+begin_src emacs-lisp +(setq org-todo-keywords + '((sequence "TODO(t)" "|" "DONE(d)") + (sequence "REPORT(r)" "BUG(b)" "KNOWNCAUSE(k)" "|" "FIXED(f)"))) +#+end_src + +#+texinfo: @noindent +The keywords should all be different, this helps Org mode to keep +track of which subsequence should be used for a given entry. The +example also shows how to define keys for fast access of a particular +state, by adding a letter in parenthesis after each keyword---you will +be prompted for the key after {{{kbd(C-c C-t)}}}. + +To define TODO keywords that are valid only in a single file, use the +following text anywhere in the file. + +#+begin_example +,#+TODO: TODO(t) | DONE(d) +,#+TODO: REPORT(r) BUG(b) KNOWNCAUSE(k) | FIXED(f) +,#+TODO: | CANCELED(c) +#+end_example + +After changing one of these lines, use {{{kbd(C-c C-c)}}} with the +cursor still in the line to make the changes known to Org mode. + +** Progress Logging +:PROPERTIES: +:DESCRIPTION: Dates and notes for progress. +:END: + +To record a timestamp and a note when changing a TODO state, call the +command ~org-todo~ with a prefix argument. + +#+attr_texinfo: :sep , +- {{{kbd(C-u C-c C-t)}}} :: + Prompt for a note and record a the time of the TODO state change. + +Org mode can also automatically record a timestamp and optionally a +note when you mark a TODO item as DONE, or even each time you change +the state of a TODO item. This system is highly configurable, +settings can be on a per-keyword basis and can be localized to a file +or even a subtree. For information on how to clock working time for a +task, see [[*Clocking Work Time]]. + +*** Closing items +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The most basic logging is to keep track of /when/ a certain TODO item +was marked as done. This can be achieved with[fn:4] + +#+begin_src emacs-lisp +(setq org-log-done 'time) +#+end_src + +#+texinfo: @noindent +Then each time you turn an entry from a TODO (not-done) state into any +of the DONE states, a line =CLOSED: [timestamp]= is inserted just +after the headline. + +If you want to record a note along with the timestamp, use[fn:5] + +#+begin_src emacs-lisp +(setq org-log-done 'note) +#+end_src + +#+texinfo: @noindent +You are then be prompted for a note, and that note is stored below the +entry with a =Closing Note= heading. + +*** Tracking TODO state changes +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +You might want to keep track of TODO state changes. You can either +record just a timestamp, or a time-stamped note for a change. These +records are inserted after the headline as an itemized list. When +taking a lot of notes, you might want to get the notes out of the way +into a drawer. Customize the variable ~org-log-into-drawer~ to get +this behavior. + +For state logging, Org mode expects configuration on a per-keyword +basis. This is achieved by adding special markers =!= (for +a timestamp) and =@= (for a note) in parentheses after each keyword. +For example: + +: #+TODO: TODO(t) WAIT(w@/!) | DONE(d!) CANCELED(c@) + +#+texinfo: @noindent +defines TODO keywords and fast access keys, and also request that +a time is recorded when the entry is set to =DONE=, and that a note is +recorded when switching to =WAIT= or =CANCELED=. The same syntax +works also when setting ~org-todo-keywords~. + +** Priorities +:PROPERTIES: +:DESCRIPTION: Some things are more important than others. +:END: + +If you use Org mode extensively, you may end up with enough TODO items +that it starts to make sense to prioritize them. Prioritizing can be +done by placing a /priority cookie/ into the headline of a TODO item, +like this + +: *** TODO [#A] Write letter to Sam Fortune + +Org mode supports three priorities: =A=, =B=, and =C=. =A= is the +highest, =B= the default if none is given. Priorities make +a difference only in the agenda. + +#+attr_texinfo: :sep ; +- {{{kbd(C-c \,)}}} :: + + Set the priority of the current headline. Press {{{kbd(A)}}}, + {{{kbd(B)}}} or {{{kbd(C)}}} to select a priority, or {{{kbd(SPC)}}} + to remove the cookie. + +- {{{kbd(S-UP)}}} (~org-priority-up~); {{{kbd(S-DOWN)}}} (~org-priority-down~) :: + + Increase/decrease the priority of the current headline. + +** Breaking Tasks Down into Subtasks +:PROPERTIES: +:DESCRIPTION: Splitting a task into manageable pieces. +:ALT_TITLE: Breaking Down Tasks +:END: + +It is often advisable to break down large tasks into smaller, +manageable subtasks. You can do this by creating an outline tree +below a TODO item, with detailed subtasks on the tree. To keep an +overview of the fraction of subtasks that have already been marked +as done, insert either =[/]= or =[%]= anywhere in the headline. These +cookies are updated each time the TODO status of a child changes, or +when pressing {{{kbd(C-c C-c)}}} on the cookie. For example: + +#+begin_example +,* Organize Party [33%] +,** TODO Call people [1/2] +,*** TODO Peter +,*** DONE Sarah +,** TODO Buy food +,** DONE Talk to neighbor +#+end_example + +** Checkboxes +:PROPERTIES: +:DESCRIPTION: Tick-off lists. +:END: + +Every item in a plain list (see [[*Plain Lists]]) can be made into +a checkbox by starting it with the string =[ ]=. Checkboxes are not +included into the global TODO list, so they are often great to split +a task into a number of simple steps. + +Here is an example of a checkbox list. + +#+begin_example +,* TODO Organize party [2/4] + - [-] call people [1/2] + - [ ] Peter + - [X] Sarah + - [X] order food +#+end_example + +Checkboxes work hierarchically, so if a checkbox item has children +that are checkboxes, toggling one of the children checkboxes makes the +parent checkbox reflect if none, some, or all of the children are +checked. + +The following commands work with checkboxes: + +- {{{kbd(C-c C-c)}}} :: + + Toggle checkbox status or---with prefix argument---checkbox presence + at point. + +- {{{kbd(M-S-RET)}}} :: + + Insert a new item with a checkbox. This works only if point is + already in a plain list item (see [[*Plain Lists]]). + +* Tags +:PROPERTIES: +:DESCRIPTION: Tagging headlines and matching sets of tags. +:END: + +An excellent way to implement labels and contexts for +cross-correlating information is to assign /tags/ to headlines. Org +mode has extensive support for tags. + +Every headline can contain a list of tags; they occur at the end of +the headline. Tags are normal words containing letters, numbers, =_=, +and =@=. Tags must be preceded and followed by a single colon, e.g., +=:work:=. Several tags can be specified, as in =:work:urgent:=. Tags +by default are in bold face with the same color as the headline. + +** Tag inheritance +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Tags make use of the hierarchical structure of outline trees. If +a heading has a certain tag, all subheadings inherit the tag as well. +For example, in the list + +#+begin_example +,* Meeting with the French group :work: +,** Summary by Frank :boss:notes: +,*** TODO Prepare slides for him :action: +#+end_example + +#+texinfo: @noindent +the final heading has the tags =work=, =boss=, =notes=, and =action= +even though the final heading is not explicitly marked with those +tags. + +You can also set tags that all entries in a file should inherit just +as if these tags were defined in a hypothetical level zero that +surrounds the entire file. Use a line like this[fn:6]: + +: #+FILETAGS: :Peter:Boss:Secret: + +** Setting tags +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Tags can simply be typed into the buffer at the end of a headline. +After a colon, {{{kbd(M-TAB)}}} offers completion on tags. There is +also a special command for inserting tags: + +- {{{kbd(C-c C-q)}}} :: + + Enter new tags for the current headline. Org mode either offers + completion or a special single-key interface for setting tags, see + below. + +- {{{kbd(C-c C-c)}}} :: + + When point is in a headline, this does the same as {{{kbd(C-c + C-q)}}}. + +Org supports tag insertion based on a /list of tags/. By default this +list is constructed dynamically, containing all tags currently used in +the buffer. You may also globally specify a hard list of tags with +the variable ~org-tag-alist~. Finally you can set the default tags +for a given file using the =TAGS= keyword, like + +: #+TAGS: @work @home @tennisclub +: #+TAGS: laptop car pc sailboat + +By default Org mode uses the standard minibuffer completion facilities +for entering tags. However, it also implements another, quicker, tag +selection method called /fast tag selection/. This allows you to +select and deselect tags with just a single key press. For this to +work well you should assign unique letters to most of your commonly +used tags. You can do this globally by configuring the variable +~org-tag-alist~ in your Emacs init file. For example, you may find +the need to tag many items in different files with =@home=. In this +case you can set something like: + +#+begin_src emacs-lisp +(setq org-tag-alist '(("@work" . ?w) ("@home" . ?h) ("laptop" . ?l))) +#+end_src + +If the tag is only relevant to the file you are working on, then you +can instead set the =TAGS= keyword as: + +: #+TAGS: @work(w) @home(h) @tennisclub(t) laptop(l) pc(p) + +** Tag groups +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +A tag can be defined as a /group tag/ for a set of other tags. The +group tag can be seen as the "broader term" for its set of tags. + +You can set group tags by using brackets and inserting a colon between +the group tag and its related tags: + +: #+TAGS: [ GTD : Control Persp ] + +#+texinfo: @noindent +or, if tags in the group should be mutually exclusive: + +: #+TAGS: { Context : @Home @Work } + +When you search for a group tag, it return matches for all members in +the group and its subgroups. In an agenda view, filtering by a group +tag displays or hide headlines tagged with at least one of the members +of the group or any of its subgroups. + +If you want to ignore group tags temporarily, toggle group tags +support with ~org-toggle-tags-groups~, bound to {{{kbd(C-c C-x q)}}}. + +** Tag searches +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c / m)}}} or {{{kbd(C-c \)}}} :: + + Create a sparse tree with all headlines matching a tags search. + With a {{{kbd(C-u)}}} prefix argument, ignore headlines that are not + a TODO line. + +- {{{kbd(M-x org-agenda m)}}} :: + + Create a global list of tag matches from all agenda files. See + [[*Matching Tags and Properties]]. + +- {{{kbd(M-x org-agenda M)}}} :: + + Create a global list of tag matches from all agenda files, but check + only TODO items and force checking subitems (see the option + ~org-tags-match-list-sublevels~). + +These commands all prompt for a match string which allows basic +Boolean logic like =+boss+urgent-project1=, to find entries with tags +=boss= and =urgent=, but not =project1=, or =Kathy|Sally= to find +entries which are tagged, like =Kathy= or =Sally=. The full syntax of +the search string is rich and allows also matching against TODO +keywords, entry levels and properties. For a more detailed description +with many examples, see [[*Matching Tags and Properties]]. + +* Properties +:PROPERTIES: +:DESCRIPTION: Storing information about an entry. +:END: + +Properties are key-value pairs associated with an entry. They live in +a special drawer with the name =PROPERTIES=. Each property is +specified on a single line, with the key (surrounded by colons) first, +and the value after it: + +#+begin_example +,* CD collection +,** Classic +,*** Goldberg Variations + :PROPERTIES: + :Title: Goldberg Variations + :Composer: J.S. Bach + :Publisher: Deutsche Grammophon + :NDisks: 1 + :END: +#+end_example + +You may define the allowed values for a particular property =Xyz= by +setting a property =Xyz_ALL=. This special property is /inherited/, +so if you set it in a level 1 entry, it applies to the entire tree. +When allowed values are defined, setting the corresponding property +becomes easier and is less prone to typing errors. For the example +with the CD collection, we can pre-define publishers and the number of +disks in a box like this: + +#+begin_example +,* CD collection + :PROPERTIES: + :NDisks_ALL: 1 2 3 4 + :Publisher_ALL: "Deutsche Grammophon" Philips EMI + :END: +#+end_example + +If you want to set properties that can be inherited by any entry in +a file, use a line like: + +: #+PROPERTY: NDisks_ALL 1 2 3 4 + +The following commands help to work with properties: + +- {{{kbd(C-c C-x p)}}} :: + + Set a property. This prompts for a property name and a value. + +- {{{kbd(C-c C-c d)}}} :: + + Remove a property from the current entry. + +To create sparse trees and special lists with selection based on +properties, the same commands are used as for tag searches (see +[[*Tags]]). The syntax for the search string is described in [[*Matching +Tags and Properties]]. + +* Dates and Times +:PROPERTIES: +:DESCRIPTION: Making items useful for planning. +:END: + +To assist project planning, TODO items can be labeled with a date +and/or a time. The specially formatted string carrying the date and +time information is called a /timestamp/ in Org mode. + +** Timestamps +:PROPERTIES: +:DESCRIPTION: Assigning a time to a tree entry. +:END: + +A timestamp is a specification of a date---possibly with a time or +a range of times---in a special format, either =<2003-09-16 Tue>= or +=<2003-09-16 Tue 09:39>= or =<2003-09-16 Tue 12:00-12:30>=. +A timestamp can appear anywhere in the headline or body of an Org tree +entry. Its presence causes entries to be shown on specific dates in +the agenda (see [[*The Weekly/daily Agenda]]). We distinguish: + +- Plain timestamp; Event; Appointment :: + + A simple timestamp just assigns a date/time to an item. This is + just like writing down an appointment or event in a paper agenda. + + #+begin_example + ,* Meet Peter at the movies + <2006-11-01 Wed 19:15> + ,* Discussion on climate change + <2006-11-02 Thu 20:00-22:00> + #+end_example + +- Timestamp with repeater interval :: + + A timestamp may contain a /repeater interval/, indicating that it + applies not only on the given date, but again and again after + a certain interval of N days (d), weeks (w), months (m), or years + (y). The following shows up in the agenda every Wednesday: + + #+begin_example + ,* Pick up Sam at school + <2007-05-16 Wed 12:30 +1w> + #+end_example + +- Diary-style expression entries :: + + #+cindex: diary style timestamps + #+cindex: sexp timestamps + For more complex date specifications, Org mode supports using the + special expression diary entries implemented in the Emacs Calendar + package. For example, with optional time: + + #+begin_example + ,* 22:00-23:00 The nerd meeting on every 2nd Thursday of the month + <%%(diary-float t 4 2)> + #+end_example + +- Time/Date range :: + + Two timestamps connected by =--= denote a range. + + #+begin_example + ,** Meeting in Amsterdam + <2004-08-23 Mon>--<2004-08-26 Thu> + #+end_example + +- Inactive timestamp :: + + Just like a plain timestamp, but with square brackets instead of + angular ones. These timestamps are inactive in the sense that they + do /not/ trigger an entry to show up in the agenda. + + #+begin_example + ,* Gillian comes late for the fifth time + [2006-11-01 Wed] + #+end_example + +** Creating Timestamps +:PROPERTIES: +:DESCRIPTION: Commands that insert timestamps. +:END: + +For Org mode to recognize timestamps, they need to be in the specific +format. All commands listed below produce timestamps in the correct +format. + +#+attr_texinfo: :sep , +- {{{kbd(C-c .)}}} :: + + Prompt for a date and insert a corresponding timestamp. When point + is at an existing timestamp in the buffer, the command is used to + modify this timestamp instead of inserting a new one. When this + command is used twice in succession, a time range is inserted. With + a prefix argument, it also adds the current time. + +- {{{kbd(C-c !)}}} :: + + Like {{{kbd(C-c .)}}}, but insert an inactive timestamp that does + not cause an agenda entry. + +- {{{kbd(S-LEFT)}}}, {{{kbd(S-RIGHT)}}} :: + + Change date at point by one day. + +- {{{kbd(S-UP)}}}, {{{kbd(S-DOWN)}}} :: + + On the beginning or enclosing bracket of a timestamp, change its + type. Within a timestamp, change the item under point. Point can + be on a year, month, day, hour or minute. When the timestamp + contains a time range like =15:30-16:30=, modifying the first time + also shifts the second, shifting the time block with constant + length. To change the length, modify the second time. + + +When Org mode prompts for a date/time, it accepts any string +containing some date and/or time information, and intelligently +interprets the string, deriving defaults for unspecified information +from the current date and time. You can also select a date in the +pop-up calendar. See the manual for more information on how exactly +the date/time prompt works. + +** Deadlines and Scheduling +:PROPERTIES: +:DESCRIPTION: Planning your work. +:END: + +A timestamp may be preceded by special keywords to facilitate +planning: + +- {{{kbd(C-c C-d)}}} :: + + Insert =DEADLINE= keyword along with a time stamp, in the line + following the headline. + + Meaning: the task---most likely a TODO item, though not + necessarily---is supposed to be finished on that date. + + On the deadline date, the task is listed in the agenda. In + addition, the agenda for /today/ carries a warning about the + approaching or missed deadline, starting ~org-deadline-warning-days~ + before the due date, and continuing until the entry is marked as + done. An example: + + #+begin_example + ,*** TODO write article about the Earth for the Guide + DEADLINE: <2004-02-29 Sun> + The editor in charge is [[bbdb:Ford Prefect]] + #+end_example + +- {{{kbd(C-c C-s)}}} :: + + Insert =SCHEDULED= keyword along with a stamp, in the line following + the headline. + + Meaning: you are planning to start working on that task on the given + date[fn:7]. + + The headline is listed under the given date[fn:8]. In addition, + a reminder that the scheduled date has passed is present in the + compilation for /today/, until the entry is marked as done, i.e., + the task is automatically forwarded until completed. + + #+begin_example + ,*** TODO Call Trillian for a date on New Years Eve. + SCHEDULED: <2004-12-25 Sat> + #+end_example + +Some tasks need to be repeated again and again. Org mode helps to +organize such tasks using a so-called repeater in a =DEADLINE=, +=SCHEDULED=, or plain timestamps. In the following example: + +#+begin_example +,** TODO Pay the rent + DEADLINE: <2005-10-01 Sat +1m> +#+end_example + +#+texinfo: @noindent +the =+1m= is a repeater; the intended interpretation is that the task +has a deadline on =<2005-10-01>= and repeats itself every (one) month +starting from that time. + +** Clocking Work Time +:PROPERTIES: +:DESCRIPTION: Tracking how long you spent on a task. +:END: + +Org mode allows you to clock the time you spend on specific tasks in +a project. + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-x C-i)}}} :: + + Start the clock on the current item (clock-in). This inserts the + =CLOCK= keyword together with a timestamp. When called with + a {{{kbd(C-u)}}} prefix argument, select the task from a list of + recently clocked tasks. + +- {{{kbd(C-c C-x C-o)}}} :: + + Stop the clock (clock-out). This inserts another timestamp at the + same location where the clock was last started. It also directly + computes the resulting time in inserts it after the time range as + ==>HH:MM=. + +- {{{kbd(C-c C-x C-e)}}} :: + + Update the effort estimate for the current clock task. + +- {{{kbd(C-c C-x C-q)}}} :: + + Cancel the current clock. This is useful if a clock was started by + mistake, or if you ended up working on something else. + +- {{{kbd(C-c C-x C-j)}}} :: + + Jump to the headline of the currently clocked in task. With + a {{{kbd(C-u)}}} prefix argument, select the target task from a list + of recently clocked tasks. + +The {{{kbd(l)}}} key may be used in the agenda (see [[*The Weekly/daily +Agenda]]) to show which tasks have been worked on or closed during +a day. + +* Capture, Refile, Archive +:PROPERTIES: +:DESCRIPTION: The ins and outs for projects. +:END: + +An important part of any organization system is the ability to quickly +capture new ideas and tasks, and to associate reference material with +them. Org does this using a process called /capture/. It also can +store files related to a task (/attachments/) in a special directory. +Once in the system, tasks and projects need to be moved around. +Moving completed project trees to an archive file keeps the system +compact and fast. + +** Capture +:PROPERTIES: +:DESCRIPTION: Capturing new stuff. +:END: + +Capture lets you quickly store notes with little interruption of your +work flow. You can define templates for new entries and associate +them with different targets for storing notes. + +*** Setting up capture +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The following customization sets a default target[fn:9] file for notes. + +#+begin_src emacs-lisp +(setq org-default-notes-file (concat org-directory "/notes.org")) +#+end_src + +You may also define a global key for capturing new material (see +[[*Activation]]). + +*** Using capture +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(M-x org-capture)}}} :: + + Start a capture process, placing you into a narrowed indirect buffer + to edit. + +- {{{kbd(C-c C-c)}}} :: + + Once you have finished entering information into the capture buffer, + {{{kbd(C-c C-c)}}} returns you to the window configuration before + the capture process, so that you can resume your work without + further distraction. + +- {{{kbd(C-c C-w)}}} :: + + Finalize the capture process by refiling the note to a different + place (see [[*Refile and Copy]]). + +- {{{kbd(C-c C-k)}}} :: + + Abort the capture process and return to the previous state. + +*** Capture templates +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +You can use templates for different types of capture items, and for +different target locations. Say you would like to use one template to +create general TODO entries, and you want to put these entries under +the heading =Tasks= in your file =~/org/gtd.org=. Also, a date tree +in the file =journal.org= should capture journal entries. A possible +configuration would look like: + +#+begin_src emacs-lisp +(setq org-capture-templates + '(("t" "Todo" entry (file+headline "~/org/gtd.org" "Tasks") + "* TODO %?\n %i\n %a") + ("j" "Journal" entry (file+datetree "~/org/journal.org") + "* %?\nEntered on %U\n %i\n %a"))) +#+end_src + +If you then press {{{kbd(t)}}} from the capture menu, Org will prepare +the template for you like this: + +: * TODO +: [[file:LINK TO WHERE YOU INITIATED CAPTURE]] + +#+texinfo: @noindent +During expansion of the template, special %-escapes[fn:10] allow +dynamic insertion of content. Here is a small selection of the +possibilities, consult the manual for more. + +| =%a= | annotation, normally the link created with ~org-store-link~ | +| =%i= | initial content, the region when capture is called with {{{kbd(C-u)}}} | +| =%t=, =%T= | timestamp, date only, or date and time | +| =%u=, =%U= | like above, but inactive timestamps | +| =%?= | after completing the template, position point here | + +** Refile and Copy +:PROPERTIES: +:DESCRIPTION: Moving/copying a tree from one place to another. +:END: + +When reviewing the captured data, you may want to refile or to copy +some of the entries into a different list, for example into a project. +Cutting, finding the right location, and then pasting the note is +cumbersome. To simplify this process, you can use the following +special command: + +- {{{kbd(C-c C-w)}}} :: + + Refile the entry or region at point. This command offers possible + locations for refiling the entry and lets you select one with + completion. The item (or all items in the region) is filed below + the target heading as a subitem. + + By default, all level 1 headlines in the current buffer are + considered to be targets, but you can have more complex definitions + across a number of files. See the variable ~org-refile-targets~ for + details. + +- {{{kbd(C-u C-c C-w)}}} :: + + Use the refile interface to jump to a heading. + +- {{{kbd(C-u C-u C-c C-w)}}} :: + + Jump to the location where ~org-refile~ last moved a tree to. + +- {{{kbd(C-c M-w)}}} :: + + Copying works like refiling, except that the original note is not + deleted. + +** Archiving +:PROPERTIES: +:DESCRIPTION: What to do with finished products. +:END: + +When a project represented by a (sub)tree is finished, you may want to +move the tree out of the way and to stop it from contributing to the +agenda. Archiving is important to keep your working files compact and +global searches like the construction of agenda views fast. + +The most common archiving action is to move a project tree to another +file, the archive file. + +- {{{kbd(C-c C-x C-a)}}} :: + + Archive the current entry using the command specified in the + variable ~org-archive-default-command~. + +- {{{kbd(C-c C-x C-s)}}} or short {{{kbd(C-c $)}}} :: + + Archive the subtree starting at point position to the location given + by ~org-archive-location~. + +The default archive location is a file in the same directory as the +current file, with the name derived by appending =_archive= to the +current file name. You can also choose what heading to file archived +items under, with the possibility to add them to a datetree in a file. +For information and examples on how to specify the file and the +heading, see the documentation string of the variable +~org-archive-location~. + +There is also an in-buffer option for setting this variable, for +example: + +: #+ARCHIVE: %s_done:: + +* Agenda Views +:PROPERTIES: +:DESCRIPTION: Collecting information into views. +:END: + +Due to the way Org works, TODO items, time-stamped items, and tagged +headlines can be scattered throughout a file or even a number of +files. To get an overview of open action items, or of events that are +important for a particular date, this information must be collected, +sorted and displayed in an organized way. + +The extracted information is displayed in a special /agenda buffer/. +This buffer is read-only, but provides commands to visit the +corresponding locations in the original Org files, and even to edit +these files remotely. Remote editing from the agenda buffer means, +for example, that you can change the dates of deadlines and +appointments from the agenda buffer. For commands available in the +Agenda buffer, see [[*Commands in the Agenda Buffer]]. + +** Agenda Files +:PROPERTIES: +:DESCRIPTION: Files being searched for agenda information. +:END: + +The information to be shown is normally collected from all /agenda +files/, the files listed in the variable ~org-agenda-files~. + +#+attr_texinfo: :sep or +- {{{kbd(C-c [)}}} :: + + Add current file to the list of agenda files. The file is added to + the front of the list. If it was already in the list, it is moved + to the front. With a prefix argument, file is added/moved to the + end. + +- {{{kbd(C-c ])}}} :: + + Remove current file from the list of agenda files. + +- {{{kbd(C-')}}} or {{{kbd(C-\,)}}} :: + + Cycle through agenda file list, visiting one file after the other. + +** The Agenda Dispatcher +:PROPERTIES: +:DESCRIPTION: Keyboard access to agenda views. +:ALT_TITLE: Agenda Dispatcher +:END: + +The views are created through a dispatcher, accessible with {{{kbd(M-x +org-agenda)}}}, or, better, bound to a global key (see [[*Activation]]). +It displays a menu from which an additional letter is required to +execute a command. The dispatcher offers the following default +commands: + +#+attr_texinfo: :sep , +- {{{kbd(a)}}} :: + + Create the calendar-like agenda (see [[*The Weekly/daily Agenda]]). + +- {{{kbd(t)}}}, {{{kbd(T)}}} :: + + Create a list of all TODO items (see [[*The Global TODO List]]). + +- {{{kbd(m)}}}, {{{kbd(M)}}} :: + + Create a list of headlines matching a given expression (see + [[*Matching Tags and Properties]]). + +- {{{kbd(s)}}} :: + + #+kindex: s @r{(Agenda dispatcher)} + Create a list of entries selected by a boolean expression of + keywords and/or regular expressions that must or must not occur in + the entry. + +** The Weekly/Daily Agenda +:PROPERTIES: +:DESCRIPTION: What is available out of the box? +:ALT_TITLE: Built-in Agenda Views +:END: + +The purpose of the weekly/daily /agenda/ is to act like a page of +a paper agenda, showing all the tasks for the current week or day. + +- {{{kbd(M-x org-agenda a)}}} :: + + Compile an agenda for the current week from a list of Org files. + The agenda shows the entries for each day. + +Org mode understands the syntax of the diary and allows you to use +diary expression entries directly in Org files: + +#+begin_example +,* Holidays + :PROPERTIES: + :CATEGORY: Holiday + :END: +%%(org-calendar-holiday) ; special function for holiday names + +,* Birthdays + :PROPERTIES: + :CATEGORY: Ann + :END: +%%(org-anniversary 1956 5 14) Arthur Dent is %d years old +%%(org-anniversary 1869 10 2) Mahatma Gandhi would be %d years old +#+end_example + +Org can interact with Emacs appointments notification facility. To +add the appointments of your agenda files, use the command +~org-agenda-to-appt~. + +** The Global TODO List +:PROPERTIES: +:DESCRIPTION: All unfinished action items. +:ALT_TITLE: Global TODO List +:END: + +The global TODO list contains all unfinished TODO items formatted and +collected into a single place. Remote editing of TODO items lets you +can change the state of a TODO entry with a single key press. For +commands available in the TODO list, see [[*Commands in the Agenda +Buffer]]. + +- {{{kbd(M-x org-agenda t)}}} :: + + Show the global TODO list. This collects the TODO items from all + agenda files (see [[*Agenda Views]]) into a single buffer. + +- {{{kbd(M-x org-agenda T)}}} :: + + Like the above, but allows selection of a specific TODO keyword. + +** Matching Tags and Properties +:PROPERTIES: +:DESCRIPTION: Structured information with fine-tuned search. +:END: + +If headlines in the agenda files are marked with /tags/ (see [[*Tags]]), +or have properties (see [[*Properties]]), you can select headlines based +on this metadata and collect them into an agenda buffer. The match +syntax described here also applies when creating sparse trees with +{{{kbd(C-c / m)}}}. + +- {{{kbd(M-x org-agenda m)}}} :: + + Produce a list of all headlines that match a given set of tags. The + command prompts for a selection criterion, which is a boolean logic + expression with tags, like =+work+urgent-withboss= or =work|home= + (see [[*Tags]]). If you often need a specific search, define a custom + command for it (see [[*The Agenda Dispatcher]]). + +- {{{kbd(M-x org-agenda M)}}} :: + + Like {{{kbd(m)}}}, but only select headlines that are also TODO + items. + +A search string can use Boolean operators =&= for AND and =|= for OR. +=&= binds more strongly than =|=. Parentheses are currently not +implemented. Each element in the search is either a tag, a regular +expression matching tags, or an expression like =PROPERTY OPERATOR +VALUE= with a comparison operator, accessing a property value. Each +element may be preceded by =-= to select against it, and =+= is +syntactic sugar for positive selection. The AND operator =&= is +optional when =+= or =-= is present. Here are some examples, using +only tags. + +- =+work-boss= :: + + Select headlines tagged =work=, but discard those also tagged + =boss=. + +- =work|laptop= :: + + Selects lines tagged =work= or =laptop=. + +- =work|laptop+night= :: + + Like before, but require the =laptop= lines to be tagged also + =night=. + +You may also test for properties at the same time as matching tags, +see the manual for more information. + +** Search View +:PROPERTIES: +:DESCRIPTION: Find entries by searching for text. +:END: + +This agenda view is a general text search facility for Org mode +entries. It is particularly useful to find notes. + +- {{{kbd(M-x org-agenda s)}}} (~org-search-view~) :: + + #+kindex: s @r{(Agenda dispatcher)} + #+findex: org-search-view + This is a special search that lets you select entries by matching + a substring or specific words using a boolean logic. + +For example, the search string =computer equipment= matches entries +that contain =computer equipment= as a substring. + +Search view can also search for specific keywords in the entry, using +Boolean logic. The search string =+computer ++wifi -ethernet -{8\.11[bg]}= matches note entries that contain the +keywords =computer= and =wifi=, but not the keyword =ethernet=, and +which are also not matched by the regular expression =8\.11[bg]=, +meaning to exclude both =8.11b= and =8.11g=. + +Note that in addition to the agenda files, this command also searches +the files listed in ~org-agenda-text-search-extra-files~. + +** Commands in the Agenda Buffer +:PROPERTIES: +:DESCRIPTION: Remote editing of Org trees. +:ALT_TITLE: Agenda Commands +:END: + +Entries in the agenda buffer are linked back to the Org file or diary +file where they originate. You are not allowed to edit the agenda +buffer itself, but commands are provided to show and jump to the +original entry location, and to edit the Org files "remotely" from the +agenda buffer. This is just a selection of the many commands, explore +the agenda menu and the manual for a complete list. + +*** Motion +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(n)}}} :: + + Next line (same as {{{kbd(DOWN)}}} and {{{kbd(C-n)}}}). + +- {{{kbd(p)}}} :: + + Previous line (same as {{{kbd(UP)}}} and {{{kbd(C-p)}}}). + +*** View/Go to Org file +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(SPC)}}} :: + + Display the original location of the item in another window. + With a prefix argument, make sure that drawers stay folded. + +- {{{kbd(TAB)}}} :: + + Go to the original location of the item in another window. + +- {{{kbd(RET)}}} :: + + Go to the original location of the item and delete other windows. + +*** Change display +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+attr_texinfo: :sep , +- {{{kbd(o)}}} :: + + Delete other windows. + +- {{{kbd(v d)}}} or short {{{kbd(d)}}} :: + + Switch to day view. + +- {{{kbd(v w)}}} or short {{{kbd(w)}}} :: + + Switch to week view. + +- {{{kbd(f)}}} :: + + Go forward in time to display the span following the current one. + For example, if the display covers a week, switch to the following + week. + +- {{{kbd(b)}}} :: + + Go backward in time to display earlier dates. + +- {{{kbd(.)}}} :: + + Go to today. + +- {{{kbd(j)}}} :: + + Prompt for a date and go there. + +- {{{kbd(v l)}}} or {{{kbd(v L)}}} or short {{{kbd(l)}}} :: + + Toggle Logbook mode. In Logbook mode, entries that were marked as + done while logging was on (see the variable ~org-log-done~) are + shown in the agenda, as are entries that have been clocked on that + day. When called with a {{{kbd(C-u)}}} prefix argument, show all + possible logbook entries, including state changes. + +- {{{kbd(r)}}}, {{{kbd(g)}}} :: + + Recreate the agenda buffer, for example to reflect the changes after + modification of the timestamps of items. + +- {{{kbd(s)}}} :: + + #+kindex: C-x C-s + #+findex: org-save-all-org-buffers + #+kindex: s + Save all Org buffers in the current Emacs session, and also the + locations of IDs. + +*** Remote editing +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(0--9)}}} :: + + Digit argument. + +- {{{kbd(t)}}} :: + + Change the TODO state of the item, both in the agenda and in the + original Org file. + +- {{{kbd(C-k)}}} :: + + Delete the current agenda item along with the entire subtree + belonging to it in the original Org file. + +- {{{kbd(C-c C-w)}}} :: + + Refile the entry at point. + +- {{{kbd(a)}}} :: + + Archive the subtree corresponding to the entry at point using the + default archiving command set in ~org-archive-default-command~. + +- {{{kbd($)}}} :: + + Archive the subtree corresponding to the current headline. + +- {{{kbd(C-c C-s)}}} :: + + Schedule this item. With a prefix argument, remove the + scheduling timestamp + +- {{{kbd(C-c C-d)}}} :: + + Set a deadline for this item. With a prefix argument, remove the + deadline. + +- {{{kbd(S-RIGHT)}}} :: + + Change the timestamp associated with the current line by one day + into the future. + +- {{{kbd(S-LEFT)}}} :: + + Change the timestamp associated with the current line by one day + into the past. + +- {{{kbd(I)}}} :: + + Start the clock on the current item. + +- {{{kbd(O)}}} :: + + Stop the previously started clock. + +- {{{kbd(X)}}} :: + + Cancel the currently running clock. + +- {{{kbd(J)}}} :: + + Jump to the running clock in another window. + +*** Quit and exit +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(q)}}} :: + + Quit agenda, remove the agenda buffer. + +- {{{kbd(x)}}} :: + + Exit agenda, remove the agenda buffer and all buffers loaded by + Emacs for the compilation of the agenda. + +** Custom Agenda Views +:PROPERTIES: +:DESCRIPTION: Defining special searches and views. +:END: + +The first application of custom searches is the definition of keyboard +shortcuts for frequently used searches, either creating an agenda +buffer, or a sparse tree (the latter covering of course only the +current buffer). + +Custom commands are configured in the variable +~org-agenda-custom-commands~. You can customize this variable, for +example by pressing {{{kbd(C)}}} from the agenda dispatcher (see [[*The +Agenda Dispatcher]]). You can also directly set it with Emacs Lisp in +the Emacs init file. The following example contains all valid agenda +views: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("w" todo "WAITING") + ("u" tags "+boss-urgent") + ("v" tags-todo "+boss-urgent"))) +#+end_src + +The initial string in each entry defines the keys you have to press +after the dispatcher command in order to access the command. Usually +this is just a single character. The second parameter is the search +type, followed by the string or regular expression to be used for the +matching. The example above will therefore define: + +- {{{kbd(w)}}} :: + + as a global search for TODO entries with =WAITING= as the TODO + keyword. + +- {{{kbd(u)}}} :: + + as a global tags search for headlines tagged =boss= but not + =urgent=. + +- {{{kbd(v)}}} :: + + The same search, but limiting it to headlines that are also TODO + items. + +* Markup for Rich Contents +:PROPERTIES: +:DESCRIPTION: Compose beautiful documents. +:ALT_TITLE: Markup +:END: + +Org is primarily about organizing and searching through your +plain-text notes. However, it also provides a lightweight yet robust +markup language for rich text formatting and more. Used in +conjunction with the export framework (see [[*Exporting]]), you can author +beautiful documents in Org. + +** Paragraphs +:PROPERTIES: +:DESCRIPTION: The basic unit of text. +:END: + +Paragraphs are separated by at least one empty line. If you need to +enforce a line break within a paragraph, use =\\= at the end of +a line. + +To preserve the line breaks, indentation and blank lines in a region, +but otherwise use normal formatting, you can use this construct, which +can also be used to format poetry. + +#+begin_example +,#+BEGIN_VERSE + Great clouds overhead + Tiny black birds rise and fall + Snow covers Emacs + + ---AlexSchroeder +,#+END_VERSE +#+end_example + +When quoting a passage from another document, it is customary to +format this as a paragraph that is indented on both the left and the +right margin. You can include quotations in Org documents like this: + +#+begin_example +,#+BEGIN_QUOTE +Everything should be made as simple as possible, +but not any simpler ---Albert Einstein +,#+END_QUOTE +#+end_example + +If you would like to center some text, do it like this: + +#+begin_example +,#+BEGIN_CENTER +Everything should be made as simple as possible, \\ +but not any simpler +,#+END_CENTER +#+end_example + +** Emphasis and Monospace +:PROPERTIES: +:DESCRIPTION: Bold, italic, etc. +:END: + +You can make words =*bold*=, =/italic/=, =_underlined_=, ==verbatim== +and =~code~=, and, if you must, =+strike-through+=. Text in the code +and verbatim string is not processed for Org specific syntax; it is +exported verbatim. + +** Embedded LaTeX +:PROPERTIES: +:DESCRIPTION: LaTeX can be freely used inside Org documents. +:END: + +For scientific notes which need to be able to contain mathematical +symbols and the occasional formula, Org mode supports embedding LaTeX +code into its files. You can directly use TeX-like syntax for special +symbols, enter formulas and entire LaTeX environments. + +#+begin_example +The radius of the sun is R_sun = 6.96 x 10^8 m. On the other hand, +the radius of Alpha Centauri is R_{Alpha Centauri} = 1.28 x R_{sun}. + +\begin{equation} % arbitrary environments, +x=\sqrt{b} % even tables, figures +\end{equation} % etc + +If $a^2=b$ and \( b=2 \), then the solution must be +either $$ a=+\sqrt{2} $$ or \[ a=-\sqrt{2} \]. +#+end_example + +** Literal examples +:PROPERTIES: +:DESCRIPTION: Source code examples with special formatting. +:END: + +You can include literal examples that should not be subjected to +markup. Such examples are typeset in monospace, so this is well +suited for source code and similar examples. + +#+begin_example +,#+BEGIN_EXAMPLE + Some example from a text file. +,#+END_EXAMPLE +#+end_example + +For simplicity when using small examples, you can also start the +example lines with a colon followed by a space. There may also be +additional whitespace before the colon: + +#+begin_example +Here is an example + : Some example from a text file. +#+end_example + +If the example is source code from a programming language, or any +other text that can be marked up by Font Lock in Emacs, you can ask +for the example to look like the fontified Emacs buffer. + +#+begin_example +,#+BEGIN_SRC emacs-lisp + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) + ,#+END_SRC +#+end_example + +To edit the example in a special buffer supporting this language, use +{{{kbd(C-c ')}}} to both enter and leave the editing buffer. + +** Images +:PROPERTIES: +:DESCRIPTION: Display an image. +:END: + +An image is a link to an image file that does not have a description +part, for example + +: ./img/cat.jpg + +If you wish to define a caption for the image and maybe a label for +internal cross references (see [[*Hyperlinks]]), make sure that the +link is on a line by itself and precede it with =CAPTION= and =NAME= +keywords as follows: + +#+begin_example +,#+CAPTION: This is the caption for the next figure link (or table) +,#+NAME: fig:SED-HR4049 +[[./img/a.jpg]] +#+end_example + +** Creating Footnotes +:PROPERTIES: +:DESCRIPTION: Edit and read footnotes. +:END: + +A footnote is defined in a paragraph that is started by a footnote +marker in square brackets in column 0, no indentation allowed. The +footnote reference is simply the marker in square brackets, inside +text. For example: + +#+begin_example +The Org homepage[fn:1] now looks a lot better than it used to. +... +[fn:1] The link is: https://orgmode.org +#+end_example + +The following commands handle footnotes: + +- {{{kbd(C-c C-x f)}}} :: + + The footnote action command. When point is on a footnote reference, + jump to the definition. When it is at a definition, jump to the + (first) reference. Otherwise, create a new footnote. When this + command is called with a prefix argument, a menu of additional + options including renumbering is offered. + +- {{{kbd(C-c C-c)}}} :: + + Jump between definition and reference. + +* Exporting +:PROPERTIES: +:DESCRIPTION: Sharing and publishing notes. +:END: + +Org can convert and export documents to a variety of other formats +while retaining as much structure (see [[*Document Structure]]) and markup +(see [[*Markup for Rich Contents]]) as possible. + +** The Export Dispatcher +:PROPERTIES: +:DESCRIPTION: The main interface. +:END: + +The export dispatcher is the main interface for Org's exports. +A hierarchical menu presents the currently configured export formats. +Options are shown as easy toggle switches on the same screen. + +- {{{kbd(C-c C-e)}}} :: + + Invokes the export dispatcher interface. + +Org exports the entire buffer by default. If the Org buffer has an +active region, then Org exports just that region. + +** Export Settings +:PROPERTIES: +:DESCRIPTION: Common export settings. +:END: + +The exporter recognizes special lines in the buffer which provide +additional information. These lines may be put anywhere in the file: + +: #+TITLE: I'm in the Mood for Org + +Most proeminent export options include: + +| =TITLE= | the title to be shown | +| =AUTHOR= | the author (default taken from ~user-full-name~) | +| =DATE= | a date, fixed, or an Org timestamp | +| =EMAIL= | email address (default from ~user-mail-address~) | +| =LANGUAGE= | language code, e.g., =en= | + +Option keyword sets can be inserted from the export dispatcher (see +[[*The Export Dispatcher]]) using the =Insert template= command by +pressing {{{kbd(#)}}}. + +** Table of Contents +:PROPERTIES: +:DESCRIPTION: The if and where of the table of contents. +:END: + +The table of contents includes all headlines in the document. Its +depth is therefore the same as the headline levels in the file. If +you need to use a different depth, or turn it off entirely, set the +~org-export-with-toc~ variable accordingly. You can achieve the same +on a per file basis, using the following =toc= item in =OPTIONS= +keyword: + +#+begin_example +,#+OPTIONS: toc:2 (only include two levels in TOC) +,#+OPTIONS: toc:nil (no default TOC at all) +#+end_example + +Org normally inserts the table of contents directly before the first +headline of the file. + +** Include Files +:PROPERTIES: +:DESCRIPTION: Include additional files into a document. +:END: + +During export, you can include the content of another file. For +example, to include your =.emacs= file, you could use: + +: #+INCLUDE: "~/.emacs" src emacs-lisp + +#+texinfo: @noindent +The first parameter is the file name to include. The optional second +parameter specifies the block type: =example=, =export= or =src=. The +optional third parameter specifies the source code language to use for +formatting the contents. This is relevant to both =export= and =src= +block types. + +You can visit the included file with {{{kbd(C-c ')}}}. + +** Comment Lines +:PROPERTIES: +:DESCRIPTION: What will not be exported. +:END: + +Lines starting with zero or more whitespace characters followed by one +=#= and a whitespace are treated as comments and, as such, are not +exported. + +Likewise, regions surrounded by =#+BEGIN_COMMENT= ... =#+END_COMMENT= +are not exported. + +Finally, a =COMMENT= keyword at the beginning of an entry, but after +any other keyword or priority cookie, comments out the entire subtree. +The command below helps changing the comment status of a headline. + +- {{{kbd(C-c ;)}}} :: + + Toggle the =COMMENT= keyword at the beginning of an entry. + +** ASCII/UTF-8 Export +:PROPERTIES: +:DESCRIPTION: Exporting to flat files with encoding. +:END: + +ASCII export produces an output file containing only plain ASCII +characters. This is the simplest and most direct text output. It +does not contain any Org markup. UTF-8 export uses additional +characters and symbols available in this encoding standards. + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-e t a)}}}, {{{kbd(C-c C-e t u)}}} :: + + Export as an ASCII file with a =.txt= extension. For =myfile.org=, + Org exports to =myfile.txt=, overwriting without warning. For + =myfile.txt=, Org exports to =myfile.txt.txt= in order to prevent + data loss. + +** HTML Export +:PROPERTIES: +:DESCRIPTION: Exporting to HTML. +:END: + +Org mode contains an HTML exporter with extensive HTML formatting +compatible with XHTML 1.0 strict standard. + +- {{{kbd(C-c C-e h h)}}} :: + + Export as HTML file with a =.html= extension. For =myfile.org=, Org + exports to =myfile.html=, overwriting without warning. {{{kbd(C-c + C-e h o)}}} exports to HTML and opens it in a web browser. + +The HTML export back-end transforms =<= and =>= to =<= and =>=. +To include raw HTML code in the Org file so the HTML export back-end +can insert that HTML code in the output, use this inline syntax: +=@@html:...@@=. For example: + +: @@html:@@bold text@@html:@@ + +For larger raw HTML code blocks, use these HTML export code blocks: + +#+begin_example +,#+HTML: Literal HTML code for export + +,#+BEGIN_EXPORT html + All lines between these markers are exported literally +,#+END_EXPORT +#+end_example + +** LaTeX Export +:PROPERTIES: +:DESCRIPTION: Exporting to @LaTeX{} and processing to PDF. +:END: + +The LaTeX export back-end can handle complex documents, incorporate +standard or custom LaTeX document classes, generate documents using +alternate LaTeX engines, and produce fully linked PDF files with +indexes, bibliographies, and tables of contents, destined for +interactive online viewing or high-quality print publication. + +By default, the LaTeX output uses the /article/ class. You can change +this by adding an option like =#+LATEX_CLASS: myclass= in your file. +The class must be listed in ~org-latex-classes~. + +- {{{kbd(C-c C-e l l)}}} :: + + Export to a LaTeX file with a =.tex= extension. For =myfile.org=, + Org exports to =myfile.tex=, overwriting without warning. + +- {{{kbd(C-c C-e l p)}}} :: + + Export as LaTeX file and convert it to PDF file. + +- {{{kbd(C-c C-e l o)}}} :: + + Export as LaTeX file and convert it to PDF, then open the PDF using + the default viewer. + +The LaTeX export back-end can insert any arbitrary LaTeX code, see +[[*Embedded LaTeX]]. There are three ways to embed such code in the Org +file and they all use different quoting syntax. + +Inserting in-line quoted with @ symbols: + +: Code embedded in-line @@latex:any arbitrary LaTeX code@@ in a paragraph. + +Inserting as one or more keyword lines in the Org file: + +: #+LATEX: any arbitrary LaTeX code + +Inserting as an export block in the Org file, where the back-end +exports any code between begin and end markers: + +#+begin_example +,#+BEGIN_EXPORT latex + any arbitrary LaTeX code +,#+END_EXPORT +#+end_example + +** iCalendar Export +:PROPERTIES: +:DESCRIPTION: Exporting to iCalendar. +:END: + +A large part of Org mode's interoperability success is its ability to +easily export to or import from external applications. The iCalendar +export back-end takes calendar data from Org files and exports to the +standard iCalendar format. + +- {{{kbd(C-c C-e c f)}}} :: + + Create iCalendar entries from the current Org buffer and store them + in the same directory, using a file extension =.ics=. + +- {{{kbd(C-c C-e c c)}}} :: + + Create a combined iCalendar file from Org files in + ~org-agenda-files~ and write it to + ~org-icalendar-combined-agenda-file~ file name. + +* Publishing +:PROPERTIES: +:DESCRIPTION: Create a web site of linked Org files. +:END: + +Org includes a publishing management system that allows you to +configure automatic HTML conversion of /projects/ composed of +interlinked Org files. You can also configure Org to automatically +upload your exported HTML pages and related attachments, such as +images and source code files, to a web server. + +You can also use Org to convert files into PDF, or even combine HTML +and PDF conversion so that files are available in both formats on the +server. + +For detailed instructions about setup, see the manual. Here is an +example: + +#+begin_src emacs-lisp +(setq org-publish-project-alist + '(("org" + :base-directory "~/org/" + :publishing-function org-html-publish-to-html + :publishing-directory "~/public_html" + :section-numbers nil + :with-toc nil + :html-head ""))) +#+end_src + +- {{{kbd(C-c C-e P x)}}} :: + + Prompt for a specific project and publish all files that belong to + it. + +- {{{kbd(C-c C-e P p)}}} :: + + Publish the project containing the current file. + +- {{{kbd(C-c C-e P f)}}} :: + + Publish only the current file. + +- {{{kbd(C-c C-e P a)}}} :: + + Publish every project. + +Org uses timestamps to track when a file has changed. The above +functions normally only publish changed files. You can override this +and force publishing of all files by giving a prefix argument to any +of the commands above. + +* Working with Source Code +:PROPERTIES: +:DESCRIPTION: Export, evaluate, and tangle code blocks. +:END: + +Org mode provides a number of features for working with source code, +including editing of code blocks in their native major mode, +evaluation of code blocks, tangling of code blocks, and exporting code +blocks and their results in several formats. + +A source code block conforms to this structure: + +#+begin_example +,#+NAME: +,#+BEGIN_SRC
+ +,#+END_SRC +#+end_example + +#+texinfo: @noindent +where: + +- == is a string used to uniquely name the code block, + +- == specifies the language of the code block, e.g., + =emacs-lisp=, =shell=, =R=, =python=, etc., + +- == can be used to control export of the code block, + +- =
= can be used to control many aspects of code + block behavior as demonstrated below, + +- == contains the actual source code. + +Use {{{kbd(C-c ')}}} to edit the current code block. It opens a new +major mode edit buffer containing the body of the source code block, +ready for any edits. Use {{{kbd(C-c ')}}} again to close the buffer +and return to the Org buffer. + +** Using header arguments +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +A header argument is specified with an initial colon followed by the +argument's name in lowercase. + +Header arguments can be set in several ways; Org prioritizes them in +case of overlaps or conflicts by giving local settings a higher +priority. + +- System-wide header arguments :: + + Those are specified by customizing ~org-babel-default-header-args~ + variable, or, for a specific language {{{var(LANG)}}} + ~org-babel-default-header-args:LANG~. + +- Header arguments in properties :: + + You can set them using =header-args= property (see [[*Properties]])---or + =header-args:LANG= for language {{{var(LANG)}}}. Header arguments + set through properties drawers apply at the sub-tree level on down. + +- Header arguments in code blocks :: + + Header arguments are most commonly set at the source code block + level, on the =BEGIN_SRC= line: + + #+begin_example + ,#+NAME: factorial + ,#+BEGIN_SRC haskell :results silent :exports code :var n=0 + fac 0 = 1 + fac n = n * fac (n-1) + ,#+END_SRC + #+end_example + + Code block header arguments can span multiple lines using =HEADER= + keyword on each line. + +** Evaluating code blocks +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Use {{{kbd(C-c C-c)}}} to evaluate the current code block and insert +its results in the Org document. By default, evaluation is only +turned on for =emacs-lisp= code blocks, however support exists for +evaluating blocks in many languages. For a complete list of supported +languages see the manual. The following shows a code block and its +results. + +#+begin_example +,#+BEGIN_SRC emacs-lisp + (+ 1 2 3 4) +,#+END_SRC + +,#+RESULTS: +: 10 +#+end_example + +The following syntax is used to pass arguments to code blocks using +the =var= header argument. + +: :var NAME=ASSIGN + +#+texinfo: @noindent +{{{var(NAME)}}} is the name of the variable bound in the code block +body. {{{var(ASSIGN)}}} is a literal value, such as a string, +a number, a reference to a table, a list, a literal example, another +code block---with or without arguments---or the results of evaluating +a code block. + +** Results of evaluation +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +How Org handles results of a code block execution depends on many +header arguments working together. The primary determinant, however, +is the =results= header argument. It controls the /collection/, +/type/, /format/, and /handling/ of code block results. + +- Collection :: + + How the results should be collected from the code block. You may + choose either =output= or =value= (the default). + +- Type :: + + What result types to expect from the execution of the code block. + You may choose among =table=, =list=, =scalar=, and =file=. Org + tries to guess it if you do not provide it. + +- Format :: + + How Org processes results. Some possible values are =code=, + =drawer=, =html=, =latex=, =link=, and =raw=. + +- Handling :: + + How to insert the results once properly formatted. Allowed values + are =silent=, =replace= (the default), =append=, or =prepend=. + +Code blocks which output results to files---e.g.: graphs, diagrams and +figures---can accept a =:file FILENAME= header argument, in which case +the results are saved to the named file, and a link to the file is +inserted into the buffer. + +** Exporting code blocks +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +It is possible to export the /code/ of code blocks, the /results/ of +code block evaluation, /both/ the code and the results of code block +evaluation, or /none/. Org defaults to exporting /code/ for most +languages. + +The =exports= header argument is to specify if that part of the Org +file is exported to, say, HTML or LaTeX formats. It can be set to +either =code=, =results=, =both= or =none=. + +** Extracting source code +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Use {{{kbd(C-c C-v t)}}} to create pure source code files by +extracting code from source blocks in the current buffer. This is +referred to as "tangling"---a term adopted from the literate +programming community. During tangling of code blocks their bodies +are expanded using ~org-babel-expand-src-block~, which can expand both +variable and "Noweb" style references. In order to tangle a code +block it must have a =tangle= header argument, see the manual for +details. + +* Miscellaneous +:PROPERTIES: +:DESCRIPTION: All the rest which did not fit elsewhere. +:END: + +** Completion +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org has in-buffer completions with {{{kbd(M-TAB)}}}. No minibuffer is +involved. Type one or more letters and invoke the hot key to complete +the text in-place. + +For example, this command will complete TeX symbols after =\=, TODO +keywords at the beginning of a headline, and tags after =:= in +a headline. + + +** Structure Templates +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +To quickly insert empty structural blocks, such as =#+BEGIN_SRC= +... =#+END_SRC=, or to wrap existing text in such a block, use + +- {{{kbd(C-c C-\,)}}} :: + + Prompt for a type of block structure, and insert the block at point. + If the region is active, it is wrapped in the block. + +** Clean view +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org's default outline with stars and no indents can become too +cluttered for short documents. For /book-like/ long documents, the +effect is not as noticeable. Org provides an alternate stars and +indentation scheme, as shown on the right in the following table. It +uses only one star and indents text to line with the heading: + +#+begin_example +,* Top level headline | * Top level headline +,** Second level | * Second level +,*** Third level | * Third level + some text | some text +,*** Third level | * Third level + more text | more text +,* Another top level headline | * Another top level headline +#+end_example + +This kind of view can be achieved dynamically at display time using +Org Indent mode ({{{kbd(M-x org-indent-mode RET)}}}), which prepends +intangible space to each line. You can turn on Org Indent mode for +all files by customizing the variable ~org-startup-indented~, or you +can turn it on for individual files using + +: #+STARTUP: indent + +If you want the indentation to be hard space characters so that the +plain text file looks as similar as possible to the Emacs display, Org +supports you by helping to indent (with {{{kbd(TAB)}}}) text below +each headline, by hiding leading stars, and by only using levels 1, 3, +etc to get two characters indentation for each level. To get this +support in a file, use + +: #+STARTUP: hidestars odd + +* Export Setup :noexport: + +#+setupfile: doc-setup.org + +#+export_file_name: orgguide.texi + +#+texinfo_dir_category: Emacs editing modes +#+texinfo_dir_title: Org Guide: (orgguide) +#+texinfo_dir_desc: Abbreviated Org mode manual + +* Footnotes + +[fn:1] See the variable ~org-special-ctrl-a/e~ to configure special +behavior of {{{kbd(C-a)}}} and {{{kbd(C-e)}}} in headlines. + +[fn:2] If you do not want the line to be split, customize the variable +~org-M-RET-may-split-line~. + +[fn:3] See also the variable ~org-show-context-detail~ to decide how +much context is shown around each match. + +[fn:4] The corresponding in-buffer setting is =#+STARTUP: logdone=. + +[fn:5] The corresponding in-buffer setting is =#+STARTUP: +logenotedone=. + +[fn:6] As with all these in-buffer settings, pressing {{{kbd(C-c +C-c)}}} activates any changes in the line. + +[fn:7] This is quite different from what is normally understood by +/scheduling a meeting/, which is done in Org by just inserting a time +stamp without keyword. + +[fn:8] It will still be listed on that date after it has been marked +as done. If you do not like this, set the variable +~org-agenda-skip-scheduled-if-done~. + +[fn:9] Using capture templates, you get finer control over capture +locations. See [[*Capture templates]]. + +[fn:10] If you need one of these sequences literally, escape the =%= +with a backslash. diff --git a/elpa/org-9.5.2/doc/org-manual.org b/elpa/org-9.5.2/doc/org-manual.org new file mode 100644 index 0000000..5c9bf43 --- /dev/null +++ b/elpa/org-9.5.2/doc/org-manual.org @@ -0,0 +1,22234 @@ +#+title: The Org Manual +#+subtitle: Release {{{version}}} +#+author: The Org Mode Developers +#+language: en + + +#+texinfo: @insertcopying + +* Introduction +:PROPERTIES: +:DESCRIPTION: Getting started. +:END: +#+cindex: introduction + +** Summary +:PROPERTIES: +:DESCRIPTION: Brief summary of what Org does. +:END: +#+cindex: summary + +Org is a mode for keeping notes, maintaining TODO lists, and project +planning with a fast and effective plain-text markup language. It +also is an authoring system with unique support for literate +programming and reproducible research. + +Org is implemented on top of Outline mode, which makes it possible to +keep the content of large files well structured. Visibility cycling +and structure editing help to work with the tree. Tables are easily +created with a built-in table editor. Plain text URL-like links +connect to websites, emails, Usenet messages, BBDB entries, and any +files related to the projects. + +Org develops organizational tasks around notes files that contain +lists or information about projects as plain text. Project planning +and task management make use of metadata which is part of an outline +node. Based on this data, specific entries can be extracted in +queries and create dynamic /agenda views/ that also integrate the +Emacs calendar and diary. Org can be used to implement many different +project planning schemes, such as David Allen's GTD system. + +Org files can serve as a single source authoring system with export to +many different formats such as HTML, LaTeX, Open Document, and +Markdown. New export backends can be derived from existing ones, or +defined from scratch. + +Org files can include source code blocks, which makes Org uniquely +suited for authoring technical documents with code examples. Org +source code blocks are fully functional; they can be evaluated in +place and their results can be captured in the file. This makes it +possible to create a single file reproducible research compendium. + +Org keeps simple things simple. When first fired up, it should feel +like a straightforward, easy to use outliner. Complexity is not +imposed, but a large amount of functionality is available when needed. +Org is a toolbox. Many users actually run only a---very +personal---fraction of Org's capabilities, and know that there is more +whenever they need it. + +All of this is achieved with strictly plain text files, the most +portable and future-proof file format. Org runs in Emacs. Emacs is +one of the most widely ported programs, so that Org mode is available +on every major platform. + +#+cindex: FAQ +There is a website for Org which provides links to the newest version +of Org, as well as additional information, frequently asked questions +(FAQ), links to tutorials, etc. This page is located at +[[https://orgmode.org]]. + +#+cindex: print edition +An earlier version (7.3) of this manual is available as a [[http://www.network-theory.co.uk/org/manual/][paperback +book from Network Theory Ltd.]]. + +** Installation +:PROPERTIES: +:DESCRIPTION: Installing Org. +:END: +#+cindex: installation + +Org is included in all recent distributions of GNU Emacs, so you +probably do not need to install it. Most users will simply activate +Org and begin exploring its many features. + +If, for one reason or another, you want to install Org on top of this +pre-packaged version, you can use the Emacs package system or clone +Org's git repository. + +We *strongly recommend* sticking to a single installation method. + +*** Using Emacs packaging system +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Recent Emacs distributions include a packaging system which lets you +install Elisp libraries. You can install Org from the "package menu", +with {{{kbd(M-x list-packages)}}}. See [[info:emacs::Package Menu][Package Menu]]. + +#+attr_texinfo: :tag Important +#+begin_quote +You need to do this in a session where no =.org= file has been +visited, i.e., where no Org built-in function have been loaded. +Otherwise autoload Org functions will mess up the installation. +#+end_quote + +*** Using Org's git repository +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +You can clone Org's repository and install Org like this: + +#+begin_example +$ cd ~/src/ +$ git clone https://git.savannah.gnu.org/git/emacs/org-mode.git +$ cd org-mode/ +$ make autoloads +#+end_example + +Note that in this case, =make autoloads= is mandatory: it defines +Org's version in =org-version.el= and Org's autoloads in +=org-loaddefs.el=. + +Remember to add the correct load path as described in the method +above. + +You can also compile with =make=, generate the documentation with +=make doc=, create a local configuration with =make config= and +install Org with =make install=. Please run =make help= to get the +list of compilation/installation options. + +For more detailed explanations on Org's build system, please check the +Org Build System page on [[https://orgmode.org/worg/dev/org-build-system.html][Worg]]. + +*** Installing Org's contributed packages +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org's repository used to contain =contrib/= directory for add-ons +contributed by others. As of Org 9.5, the directory has bee moved to +this new dedicated [[https://git.sr.ht/~bzg/org-contrib][org-contrib]] repository, which you can install +separately. + +** Activation +:PROPERTIES: +:DESCRIPTION: How to activate Org for certain buffers. +:END: +#+cindex: activation +#+cindex: autoload +#+cindex: ELPA +#+cindex: global key bindings +#+cindex: key bindings, global + +Org mode buffers need Font Lock to be turned on: this is the default +in Emacs[fn:1]. + +There are compatibility issues between Org mode and some other Elisp +packages (see [[*Packages that conflict with Org mode]]). Please take the +time to check the list. + +#+findex: org-agenda +#+findex: org-capture +#+findex: org-store-link +For a better experience, the three Org commands ~org-store-link~, +~org-capture~ and ~org-agenda~ ought to be accessible anywhere in +Emacs, not just in Org buffers. To that effect, you need to bind them +to globally available keys, like the ones reserved for users (see +[[info:elisp::Key Binding Conventions]]). Here are suggested bindings, +please modify the keys to your own liking. + +#+begin_src emacs-lisp +(global-set-key (kbd "C-c l") #'org-store-link) +(global-set-key (kbd "C-c a") #'org-agenda) +(global-set-key (kbd "C-c c") #'org-capture) +#+end_src + +#+cindex: Org mode, turning on +Files with the =.org= extension use Org mode by default. To turn on +Org mode in a file that does not have the extension =.org=, make the +first line of a file look like this: + +: MY PROJECTS -*- mode: org; -*- + +#+vindex: org-insert-mode-line-in-empty-file +#+texinfo: @noindent +which selects Org mode for this buffer no matter what the file's name +is. See also the variable ~org-insert-mode-line-in-empty-file~. + +Many commands in Org work on the region if the region is /active/. To +make use of this, you need to have Transient Mark mode turned on, +which is the default. If you do not like it, you can create an active +region by using the mouse to select a region, or pressing +{{{kbd(C-SPC)}}} twice before moving point. + +** Feedback +:PROPERTIES: +:DESCRIPTION: Bug reports, ideas, patches, etc. +:END: +#+cindex: feedback +#+cindex: bug reports +#+cindex: reporting a bug +#+cindex: maintainer +#+cindex: author + +If you find problems with Org, or if you have questions, remarks, or +ideas about it, please send an email to the Org mailing list +[[mailto:emacs-orgmode@gnu.org]]. You can subscribe to the list [[https://lists.gnu.org/mailman/listinfo/emacs-orgmode][from this +web page]]. If you are not a member of the mailing list, your mail will +be passed to the list after a moderator has approved it[fn:2]. We ask +you to read and respect the [[https://www.gnu.org/philosophy/kind-communication.html][GNU Kind Communications Guidelines]] when +sending messages on this mailing list. + +#+findex: org-version +#+findex: org-submit-bug-report +For bug reports, please first try to reproduce the bug with the latest +version of Org available---if you are running an outdated version, it +is quite possible that the bug has been fixed already. If the bug +persists, prepare a report and provide as much information as +possible, including the version information of Emacs ({{{kbd(M-x +emacs-version)}}}) and Org ({{{kbd(M-x org-version)}}}), as well as +the Org related setup in the Emacs init file. The easiest way to do +this is to use the command + +: M-x org-submit-bug-report + +#+texinfo: @noindent +which puts all this information into an Emacs mail buffer so that you +only need to add your description. If you are not sending the Email +from within Emacs, please copy and paste the content into your Email +program. + +Sometimes you might face a problem due to an error in your Emacs or +Org mode setup. Before reporting a bug, it is very helpful to start +Emacs with minimal customizations and reproduce the problem. Doing so +often helps you determine if the problem is with your customization or +with Org mode itself. You can start a typical minimal session with +a command like the example below. + +: $ emacs -Q -l /path/to/minimal-org.el + +However if you are using Org mode as distributed with Emacs, a minimal +setup is not necessary. In that case it is sufficient to start Emacs +as =emacs -Q=. The =minimal-org.el= setup file can have contents as +shown below. + +#+begin_src emacs-lisp +;;; Minimal setup to load latest `org-mode'. + +;; Activate debugging. +(setq debug-on-error t + debug-on-signal nil + debug-on-quit nil) + +;; Add latest Org mode to load path. +(add-to-list 'load-path (expand-file-name "/path/to/org-mode/lisp")) +#+end_src + +If an error occurs, a "backtrace" can be very useful---see below on +how to create one. Often a small example file helps, along with clear +information about: + +1. What exactly did you do? +2. What did you expect to happen? +3. What happened instead? + +Thank you for helping to improve this program. + +*** How to create a useful backtrace +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: backtrace of an error +If working with Org produces an error with a message you do not +understand, you may have hit a bug. The best way to report this is by +providing, in addition to what was mentioned above, a backtrace. This +is information from the built-in debugger about where and how the +error occurred. Here is how to produce a useful backtrace: + +1. Reload uncompiled versions of all Org mode Lisp files. The + backtrace contains much more information if it is produced with + uncompiled code. To do this, use + + : C-u M-x org-reload + + #+texinfo: @noindent + or, from the menu: Org \rarr Refresh/Reload \rarr Reload Org uncompiled. + +2. Then, activate the debugger: + + : M-x toggle-debug-on-error + + #+texinfo: @noindent + or, from the menu: Options \rarr Enter Debugger on Error. + +3. Do whatever you have to do to hit the error. Do not forget to + document the steps you take. + +4. When you hit the error, a =*Backtrace*= buffer appears on the + screen. Save this buffer to a file---for example using {{{kbd(C-x + C-w)}}}---and attach it to your bug report. + +** Typesetting Conventions Used in this Manual +:PROPERTIES: +:DESCRIPTION: Typesetting conventions used in this manual. +:ALT_TITLE: Conventions +:END: + +*** TODO keywords, tags, properties, etc. +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org uses various syntactical elements: TODO keywords, tags, property +names, keywords, blocks, etc. In this manual we use the following +conventions: + +#+attr_texinfo: :sep , +- =TODO=, =WAITING= :: + + TODO keywords are written with all capitals, even if they are + user-defined. + +- =boss=, =ARCHIVE= :: + + Tags are case-sensitive. User-defined tags are usually written in + lowercase; built-in tags with special meaning are written as they + should appear in the document, usually with all capitals. + +- =Release=, =PRIORITY= :: + + User-defined properties are capitalized; built-in properties with + special meaning are written with all capitals. + +- =TITLE=, =BEGIN= ... =END= :: + + Keywords and blocks are written in uppercase to enhance their + readability, but you can use lowercase in your Org files. + +*** Key bindings and commands +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The manual lists both the keys and the corresponding commands for +accessing a functionality. Org mode often uses the same key for +different functions, depending on context. The command that is bound +to such keys has a generic name, like ~org-metaright~. In the manual +we will, wherever possible, give the function that is internally +called by the generic command. For example, in the chapter on +document structure, {{{kbd(M-RIGHT)}}} will be listed to call +~org-do-demote~, while in the chapter on tables, it will be listed to +call ~org-table-move-column-right~. + +* Document Structure +:PROPERTIES: +:DESCRIPTION: A tree works like your brain. +:END: + +#+cindex: document structure +#+cindex: structure of document +Org is an outliner. Outlines allow a document to be organized in +a hierarchical structure, which, least for me, is the best +representation of notes and thoughts. An overview of this structure +is achieved by folding, i.e., hiding large parts of the document to +show only the general document structure and the parts currently being +worked on. Org greatly simplifies the use of outlines by compressing +the entire show and hide functionalities into a single command, +~org-cycle~, which is bound to the {{{kbd(TAB)}}} key. + +** Headlines +:PROPERTIES: +:DESCRIPTION: How to typeset Org tree headlines. +:END: +#+cindex: headlines +#+cindex: outline tree +#+vindex: org-special-ctrl-a/e +#+vindex: org-special-ctrl-k +#+vindex: org-ctrl-k-protect-subtree + +Headlines define the structure of an outline tree. Org headlines +start on the left margin[fn:3] with one or more stars followed by +a space. For example: + +#+begin_example +,* Top level headline +,** Second level +,*** Third level + some text +,*** Third level + more text +,* Another top level headline +#+end_example + +#+vindex: org-footnote-section +The name defined in ~org-footnote-section~ is reserved. Do not use it +as a title for your own headings. + +Some people find the many stars too noisy and would prefer an outline +that has whitespace followed by a single star as headline starters. +This can be achieved using a Org Indent minor mode. See [[*A Cleaner +Outline View]] for more information. + +Headlines are not numbered. However, you may want to dynamically +number some, or all, of them. See [[*Dynamic Headline Numbering]]. + +#+vindex: org-cycle-separator-lines +An empty line after the end of a subtree is considered part of it and +is hidden when the subtree is folded. However, if you leave at least +two empty lines, one empty line remains visible after folding the +subtree, in order to structure the collapsed view. See the variable +~org-cycle-separator-lines~ to modify this behavior. + +** Visibility Cycling +:PROPERTIES: +:DESCRIPTION: Show and hide, much simplified. +:END: +#+cindex: cycling, visibility +#+cindex: visibility cycling +#+cindex: trees, visibility +#+cindex: show hidden text +#+cindex: hide text + +*** Global and local cycling +:PROPERTIES: +:DESCRIPTION: Cycling through various visibility states. +:END: +#+cindex: subtree visibility states +#+cindex: subtree cycling +#+cindex: folded, subtree visibility state +#+cindex: children, subtree visibility state +#+cindex: subtree, subtree visibility state + +Outlines make it possible to hide parts of the text in the buffer. +Org uses just two commands, bound to {{{kbd(TAB)}}} and +{{{kbd(S-TAB)}}} to change the visibility in the buffer. + +#+attr_texinfo: :sep , +- {{{kbd(TAB)}}} (~org-cycle~) :: + + #+kindex: TAB + #+findex: org-cycle + /Subtree cycling/: Rotate current subtree among the states + + #+begin_example + ,-> FOLDED -> CHILDREN -> SUBTREE --. + '-----------------------------------' + #+end_example + + #+vindex: org-cycle-emulate-tab + Point must be on a headline for this to work[fn:4]. + +- {{{kbd(S-TAB)}}} (~org-global-cycle~), {{{kbd(C-u TAB)}}} :: + + #+cindex: global visibility states + #+cindex: global cycling + #+cindex: overview, global visibility state + #+cindex: contents, global visibility state + #+cindex: show all, global visibility state + #+kindex: C-u TAB + #+kindex: S-TAB + #+findex: org-global-cycle + /Global cycling/: Rotate the entire buffer among the states + + #+begin_example + ,-> OVERVIEW -> CONTENTS -> SHOW ALL --. + '--------------------------------------' + #+end_example + + When {{{kbd(S-TAB)}}} is called with a numeric prefix argument + {{{var(N)}}}, view contents only up to headlines of level + {{{var(N)}}}. + + Note that inside tables (see [[*Tables]]), {{{kbd(S-TAB)}}} jumps to the + previous field instead. + + #+vindex: org-cycle-global-at-bob + You can run global cycling using {{{kbd(TAB)}}} only if point is at + the very beginning of the buffer, but not on a headline, and + ~org-cycle-global-at-bob~ is set to a non-~nil~ value. + +- {{{kbd(C-u C-u TAB)}}} (~org-set-startup-visibility~) :: + + #+cindex: startup visibility + #+kindex: C-u C-u TAB + #+findex: org-set-startup-visibility + Switch back to the startup visibility of the buffer (see [[*Initial + visibility]]). + +- {{{kbd(C-u C-u C-u TAB)}}} (~outline-show-all~) :: + + #+cindex: show all, command + #+kindex: C-u C-u C-u TAB + #+findex: outline-show-all + Show all, including drawers. + +- {{{kbd(C-c C-r)}}} (~org-reveal~) :: + + #+cindex: revealing context + #+kindex: C-c C-r + #+findex: org-reveal + Reveal context around point, showing the current entry, the + following heading and the hierarchy above. It is useful for working + near a location that has been exposed by a sparse tree command (see + [[*Sparse Trees]]) or an agenda command (see [[*Commands in the Agenda + Buffer]]). With a prefix argument, show, on each level, all sibling + headings. With a double prefix argument, also show the entire + subtree of the parent. + +- {{{kbd(C-c C-k)}}} (~outline-show-branches~) :: + + #+cindex: show branches, command + #+kindex: C-c C-k + #+findex: outline-show-branches + Expose all the headings of the subtree, but not their bodies. + +- {{{kbd(C-c TAB)}}} (~outline-show-children~) :: + + #+cindex: show children, command + #+kindex: C-c TAB + #+findex: outline-show-children + Expose all direct children of the subtree. With a numeric prefix + argument {{{var(N)}}}, expose all children down to level + {{{var(N)}}}. + +- {{{kbd(C-c C-x b)}}} (~org-tree-to-indirect-buffer~) :: + + #+kindex: C-c C-x b + #+findex: org-tree-to-indirect-buffer + Show the current subtree in an indirect buffer[fn:5]. With + a numeric prefix argument {{{var(N)}}}, go up to level {{{var(N)}}} + and then take that tree. If {{{var(N)}}} is negative then go up + that many levels. With a {{{kbd(C-u)}}} prefix, do not remove the + previously used indirect buffer. + +- {{{kbd(C-c C-x v)}}} (~org-copy-visible~) :: + + #+kindex: C-c C-x v + #+findex: org-copy-visible + Copy the /visible/ text in the region into the kill ring. + +*** Initial visibility +:PROPERTIES: +:DESCRIPTION: Setting the initial visibility state. +:END: + +#+vindex: org-startup-folded +When Emacs first visits an Org file, the global state is set to +~showeverything~, i.e., all file content is visible[fn:6]. This can +be configured through the variable ~org-startup-folded~, or on +a per-file basis by adding one of the following lines anywhere in the +buffer: + +#+cindex: @samp{STARTUP}, keyword +#+begin_example +,#+STARTUP: overview +,#+STARTUP: content +,#+STARTUP: showall +,#+STARTUP: show2levels +,#+STARTUP: show3levels +,#+STARTUP: show4levels +,#+STARTUP: show5levels +,#+STARTUP: showeverything +#+end_example + +#+cindex: @samp{VISIBILITY}, property +Furthermore, any entries with a =VISIBILITY= property (see [[*Properties +and Columns]]) get their visibility adapted accordingly. Allowed values +for this property are =folded=, =children=, =content=, and =all=. + +- {{{kbd(C-u C-u TAB)}}} (~org-set-startup-visibility~) :: + + #+kindex: C-u C-u TAB + #+findex: org-set-startup-visibility + Switch back to the startup visibility of the buffer, i.e., whatever + is requested by startup options and =VISIBILITY= properties in + individual entries. + +*** Catching invisible edits +:PROPERTIES: +:DESCRIPTION: Preventing mistakes when editing invisible parts. +:END: +#+cindex: edits, catching invisible + +#+vindex: org-catch-invisible-edits +Sometimes you may inadvertently edit an invisible part of the buffer +and be confused on what has been edited and how to undo the mistake. +Setting ~org-catch-invisible-edits~ to non-~nil~ helps preventing +this. See the docstring of this option on how Org should catch +invisible edits and process them. + +** Motion +:PROPERTIES: +:DESCRIPTION: Jumping to other headlines. +:END: +#+cindex: motion, between headlines +#+cindex: jumping, to headlines +#+cindex: headline navigation + +The following commands jump to other headlines in the buffer. + +- {{{kbd(C-c C-n)}}} (~org-next-visible-heading~) :: + + #+kindex: C-c C-n + #+findex: org-next-visible-heading + Next heading. + +- {{{kbd(C-c C-p)}}} (~org-previous-visible-heading~) :: + + #+kindex: C-c C-p + #+findex: org-previous-visible-heading + Previous heading. + +- {{{kbd(C-c C-f)}}} (~org-forward-heading-same-level~) :: + + #+kindex: C-c C-f + #+findex: org-forward-heading-same-level + Next heading same level. + +- {{{kbd(C-c C-b)}}} (~org-backward-heading-same-level~) :: + + #+kindex: C-c C-b + #+findex: org-backward-heading-same-level + Previous heading same level. + +- {{{kbd(C-c C-u)}}} (~outline-up-heading~) :: + + #+kindex: C-c C-u + #+findex: outline-up-heading + Backward to higher level heading. + +- {{{kbd(C-c C-j)}}} (~org-goto~) :: + + #+kindex: C-c C-j + #+findex: org-goto + #+vindex: org-goto-auto-isearch + Jump to a different place without changing the current outline + visibility. Shows the document structure in a temporary buffer, + where you can use the following keys to find your destination: + + #+attr_texinfo: :columns 0.3 0.7 + | {{{kbd(TAB)}}} | Cycle visibility. | + | {{{kbd(DOWN)}}} / {{{kbd(UP)}}} | Next/previous visible headline. | + | {{{kbd(RET)}}} | Select this location. | + | {{{kbd(/)}}} | Do a Sparse-tree search | + + #+texinfo: @noindent + The following keys work if you turn off ~org-goto-auto-isearch~ + + #+attr_texinfo: :columns 0.3 0.7 + | {{{kbd(n)}}} / {{{kbd(p)}}} | Next/previous visible headline. | + | {{{kbd(f)}}} / {{{kbd(b)}}} | Next/previous headline same level. | + | {{{kbd(u)}}} | One level up. | + | {{{kbd(0)}}} ... {{{kbd(9)}}} | Digit argument. | + | {{{kbd(q)}}} | Quit. | + + #+vindex: org-goto-interface + #+texinfo: @noindent + See also the variable ~org-goto-interface~. + +** Structure Editing +:PROPERTIES: +:DESCRIPTION: Changing sequence and level of headlines. +:END: +#+cindex: structure editing +#+cindex: headline, promotion and demotion +#+cindex: promotion, of subtrees +#+cindex: demotion, of subtrees +#+cindex: subtree, cut and paste +#+cindex: pasting, of subtrees +#+cindex: cutting, of subtrees +#+cindex: copying, of subtrees +#+cindex: sorting, of subtrees +#+cindex: subtrees, cut and paste + +#+attr_texinfo: :sep , +- {{{kbd(M-RET)}}} (~org-meta-return~) :: + + #+kindex: M-RET + #+findex: org-meta-return + #+vindex: org-M-RET-may-split-line + Insert a new heading, item or row. + + If the command is used at the /beginning/ of a line, and if there is + a heading or a plain list item (see [[*Plain Lists]]) at point, the new + heading/item is created /before/ the current line. When used at the + beginning of a regular line of text, turn that line into a heading. + + When this command is used in the middle of a line, the line is split + and the rest of the line becomes the new item or headline. If you + do not want the line to be split, customize + ~org-M-RET-may-split-line~. + + Calling the command with a {{{kbd(C-u)}}} prefix unconditionally + inserts a new heading at the end of the current subtree, thus + preserving its contents. With a double {{{kbd(C-u C-u)}}} prefix, + the new heading is created at the end of the parent subtree instead. + +- {{{kbd(C-RET)}}} (~org-insert-heading-respect-content~) :: + + #+kindex: C-RET + #+findex: org-insert-heading-respect-content + Insert a new heading at the end of the current subtree. + +- {{{kbd(M-S-RET)}}} (~org-insert-todo-heading~) :: + + #+kindex: M-S-RET + #+findex: org-insert-todo-heading + #+vindex: org-treat-insert-todo-heading-as-state-change + Insert new TODO entry with same level as current heading. See also + the variable ~org-treat-insert-todo-heading-as-state-change~. + +- {{{kbd(C-S-RET)}}} (~org-insert-todo-heading-respect-content~) :: + + #+kindex: C-S-RET + #+findex: org-insert-todo-heading-respect-content + Insert new TODO entry with same level as current heading. Like + {{{kbd(C-RET)}}}, the new headline is inserted after the current + subtree. + +- {{{kbd(TAB)}}} (~org-cycle~) :: + + #+kindex: TAB + #+findex: org-cycle + In a new entry with no text yet, the first {{{kbd(TAB)}}} demotes + the entry to become a child of the previous one. The next + {{{kbd(TAB)}}} makes it a parent, and so on, all the way to top + level. Yet another {{{kbd(TAB)}}}, and you are back to the initial + level. + +- {{{kbd(M-LEFT)}}} (~org-do-promote~), {{{kbd(M-RIGHT)}}} (~org-do-demote~) :: + + #+kindex: M-LEFT + #+findex: org-do-promote + #+kindex: M-RIGHT + #+findex: org-do-demote + Promote or demote current heading by one level. + + #+cindex: region, active + #+cindex: active region + #+cindex: transient mark mode + When there is an active region---i.e., when Transient Mark mode is + active---promotion and demotion work on all headlines in the region. + To select a region of headlines, it is best to place both point and + mark at the beginning of a line, mark at the beginning of the first + headline, and point at the line just after the last headline to + change. + +- {{{kbd(M-S-LEFT)}}} (~org-promote-subtree~) :: + + #+kindex: M-S-LEFT + #+findex: org-promote-subtree + Promote the current subtree by one level. + +- {{{kbd(M-S-RIGHT)}}} (~org-demote-subtree~) :: + + #+kindex: M-S-RIGHT + #+findex: org-demote-subtree + Demote the current subtree by one level. + +- {{{kbd(M-UP)}}} (~org-move-subtree-up~) :: + + #+kindex: M-UP + #+findex: org-move-subtree-up + Move subtree up, i.e., swap with previous subtree of same level. + +- {{{kbd(M-DOWN)}}} (~org-move-subtree-down~) :: + + #+kindex: M-DOWN + #+findex: org-move-subtree-down + Move subtree down, i.e., swap with next subtree of same level. + +- {{{kbd(C-c @)}}} (~org-mark-subtree~) :: + + #+kindex: C-c @@ + #+findex: org-mark-subtree + Mark the subtree at point. Hitting repeatedly marks subsequent + subtrees of the same level as the marked subtree. + +- {{{kbd(C-c C-x C-w)}}} (~org-cut-subtree~) :: + + #+kindex: C-c C-x C-w + #+findex: org-cut-subtree + Kill subtree, i.e., remove it from buffer but save in kill ring. + With a numeric prefix argument N, kill N sequential subtrees. + +- {{{kbd(C-c C-x M-w)}}} (~org-copy-subtree~) :: + + #+kindex: C-c C-x M-w + #+findex: org-copy-subtree + Copy subtree to kill ring. With a numeric prefix argument N, copy + the N sequential subtrees. + +- {{{kbd(C-c C-x C-y)}}} (~org-paste-subtree~) :: + + #+kindex: C-c C-x C-y + #+findex: org-paste-subtree + Yank subtree from kill ring. This does modify the level of the + subtree to make sure the tree fits in nicely at the yank position. + The yank level can also be specified with a numeric prefix argument, + or by yanking after a headline marker like =****=. + +- {{{kbd(C-y)}}} (~org-yank~) :: + + #+kindex: C-y + #+findex: org-yank + #+vindex: org-yank-adjusted-subtrees + #+vindex: org-yank-folded-subtrees + Depending on the variables ~org-yank-adjusted-subtrees~ and + ~org-yank-folded-subtrees~, Org's internal ~yank~ command pastes + subtrees folded and in a clever way, using the same command as + {{{kbd(C-c C-x C-y)}}}. With the default settings, no level + adjustment takes place, but the yanked tree is folded unless doing + so would swallow text previously visible. Any prefix argument to + this command forces a normal ~yank~ to be executed, with the prefix + passed along. A good way to force a normal yank is {{{kbd(C-u + C-y)}}}. If you use ~yank-pop~ after a yank, it yanks previous kill + items plainly, without adjustment and folding. + +- {{{kbd(C-c C-x c)}}} (~org-clone-subtree-with-time-shift~) :: + + #+kindex: C-c C-x c + #+findex: org-clone-subtree-with-time-shift + Clone a subtree by making a number of sibling copies of it. You are + prompted for the number of copies to make, and you can also specify + if any timestamps in the entry should be shifted. This can be + useful, for example, to create a number of tasks related to a series + of lectures to prepare. For more details, see the docstring of the + command ~org-clone-subtree-with-time-shift~. + +- {{{kbd(C-c C-w)}}} (~org-refile~) :: + + #+kindex: C-c C-w + #+findex: org-refile + Refile entry or region to a different location. See [[*Refile and + Copy]]. + +- {{{kbd(C-c ^)}}} (~org-sort~) :: + + #+kindex: C-c ^ + #+findex: org-sort + Sort same-level entries. When there is an active region, all + entries in the region are sorted. Otherwise the children of the + current headline are sorted. The command prompts for the sorting + method, which can be alphabetically, numerically, by time---first + timestamp with active preferred, creation time, scheduled time, + deadline time---by priority, by TODO keyword---in the sequence the + keywords have been defined in the setup---or by the value of + a property. Reverse sorting is possible as well. You can also + supply your own function to extract the sorting key. With + a {{{kbd(C-u)}}} prefix, sorting is case-sensitive. + +- {{{kbd(C-x n s)}}} (~org-narrow-to-subtree~) :: + + #+kindex: C-x n s + #+findex: org-narrow-to-subtree + Narrow buffer to current subtree. + +- {{{kbd(C-x n b)}}} (~org-narrow-to-block~) :: + + #+kindex: C-x n b + #+findex: org-narrow-to-block + Narrow buffer to current block. + +- {{{kbd(C-x n w)}}} (~widen~) :: + + #+kindex: C-x n w + #+findex: widen + Widen buffer to remove narrowing. + +- {{{kbd(C-c *)}}} (~org-toggle-heading~) :: + + #+kindex: C-c * + #+findex: org-toggle-heading + Turn a normal line or plain list item into a headline---so that it + becomes a subheading at its location. Also turn a headline into + a normal line by removing the stars. If there is an active region, + turn all lines in the region into headlines. If the first line in + the region was an item, turn only the item lines into headlines. + Finally, if the first line is a headline, remove the stars from all + headlines in the region. + +Note that when point is inside a table (see [[*Tables]]), the Meta-Cursor +keys have different functionality. + +** Sparse Trees +:PROPERTIES: +:DESCRIPTION: Matches embedded in context. +:END: +#+cindex: sparse trees +#+cindex: trees, sparse +#+cindex: folding, sparse trees +#+cindex: occur, command + +#+vindex: org-show-context-detail +An important feature of Org mode is the ability to construct /sparse +trees/ for selected information in an outline tree, so that the entire +document is folded as much as possible, but the selected information +is made visible along with the headline structure above it[fn:7]. +Just try it out and you will see immediately how it works. + +Org mode contains several commands creating such trees, all these +commands can be accessed through a dispatcher: + +- {{{kbd(C-c /)}}} (~org-sparse-tree~) :: + + #+kindex: C-c / + #+findex: org-sparse-tree + This prompts for an extra key to select a sparse-tree creating + command. + +- {{{kbd(C-c / r)}}} or {{{kbd(C-c / /)}}} (~org-occur~) :: + + #+kindex: C-c / r + #+kindex: C-c / / + #+findex: org-occur + #+vindex: org-remove-highlights-with-change + Prompts for a regexp (see [[*Regular Expressions]]) and shows a sparse + tree with all matches. If the match is in a headline, the headline + is made visible. If the match is in the body of an entry, headline + and body are made visible. In order to provide minimal context, + also the full hierarchy of headlines above the match is shown, as + well as the headline following the match. Each match is also + highlighted; the highlights disappear when the buffer is changed by + an editing command, or by pressing {{{kbd(C-c C-c)}}}[fn:8]. When + called with a {{{kbd(C-u)}}} prefix argument, previous highlights + are kept, so several calls to this command can be stacked. + +- {{{kbd(M-g n)}}} or {{{kbd(M-g M-n)}}} (~next-error~) :: + + #+kindex: M-g n + #+kindex: M-g M-n + #+findex: next-error + Jump to the next sparse tree match in this buffer. + +- {{{kbd(M-g p)}}} or {{{kbd(M-g M-p)}}} (~previous-error~) :: + + #+kindex: M-g p + #+kindex: M-g M-p + #+findex: previous-error + Jump to the previous sparse tree match in this buffer. + +#+vindex: org-agenda-custom-commands +For frequently used sparse trees of specific search strings, you can +use the variable ~org-agenda-custom-commands~ to define fast keyboard +access to specific sparse trees. These commands will then be +accessible through the agenda dispatcher (see [[*The Agenda Dispatcher]]). +For example: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("f" occur-tree "FIXME"))) +#+end_src + +#+texinfo: @noindent +defines the key {{{kbd(f)}}} as a shortcut for creating a sparse tree +matching the string =FIXME=. + +The other sparse tree commands select headings based on TODO keywords, +tags, or properties and are discussed later in this manual. + +#+kindex: C-c C-e C-v +#+cindex: printing sparse trees +#+cindex: visible text, printing +To print a sparse tree, you can use the Emacs command +~ps-print-buffer-with-faces~ which does not print invisible parts of +the document. Or you can use the command {{{kbd(C-c C-e C-v)}}} to +export only the visible part of the document and print the resulting +file. + +** Plain Lists +:PROPERTIES: +:DESCRIPTION: Additional structure within an entry. +:END: +#+cindex: plain lists +#+cindex: lists, plain +#+cindex: lists, ordered +#+cindex: ordered lists + +Within an entry of the outline tree, hand-formatted lists can provide +additional structure. They also provide a way to create lists of +checkboxes (see [[*Checkboxes]]). Org supports editing such lists, and +every exporter (see [[*Exporting]]) can parse and format them. + +Org knows ordered lists, unordered lists, and description lists. + +#+attr_texinfo: :indic @bullet +- /Unordered/ list items start with =-=, =+=, or =*=[fn:9] as bullets. + +- + #+vindex: org-plain-list-ordered-item-terminator + #+vindex: org-alphabetical-lists + /Ordered/ list items start with a numeral followed by either + a period or a right parenthesis[fn:10], such as =1.= or =1)=[fn:11] + If you want a list to start with a different value---e.g., + 20---start the text of the item with =[@20]=[fn:12]. Those + constructs can be used in any item of the list in order to enforce + a particular numbering. + +- /Description/ list items are unordered list items, and contain the + separator =::= to distinguish the description /term/ from the + description. + +Items belonging to the same list must have the same indentation on the +first line. In particular, if an ordered list reaches number =10.=, +then the 2-digit numbers must be written left-aligned with the other +numbers in the list. An item ends before the next line that is less +or equally indented than its bullet/number. + +A list ends whenever every item has ended, which means before any line +less or equally indented than items at top level. It also ends before +two blank lines. In that case, all items are closed. Here is an +example: + +#+begin_example +,* Lord of the Rings +My favorite scenes are (in this order) +1. The attack of the Rohirrim +2. Eowyn's fight with the witch king + + this was already my favorite scene in the book + + I really like Miranda Otto. +3. Peter Jackson being shot by Legolas + - on DVD only + He makes a really funny face when it happens. +But in the end, no individual scenes matter but the film as a whole. +Important actors in this film are: +- Elijah Wood :: He plays Frodo +- Sean Astin :: He plays Sam, Frodo's friend. I still remember him + very well from his role as Mikey Walsh in /The Goonies/. +#+end_example + +Org supports these lists by tuning filling and wrapping commands to +deal with them correctly, and by exporting them properly (see +[[*Exporting]]). Since indentation is what governs the structure of these +lists, many structural constructs like =#+BEGIN_= blocks can be +indented to signal that they belong to a particular item. + +#+vindex: org-list-demote-modify-bullet +#+vindex: org-list-indent-offset +If you find that using a different bullet for a sub-list---than that +used for the current list-level---improves readability, customize the +variable ~org-list-demote-modify-bullet~. To get a greater difference +of indentation between items and theirs sub-items, customize +~org-list-indent-offset~. + +#+vindex: org-list-automatic-rules +The following commands act on items when point is in the first line of +an item---the line with the bullet or number. Some of them imply the +application of automatic rules to keep list structure intact. If some +of these actions get in your way, configure ~org-list-automatic-rules~ +to disable them individually. + +#+attr_texinfo: :sep , +- {{{kbd(TAB)}}} (~org-cycle~) :: + + #+cindex: cycling, in plain lists + #+kindex: TAB + #+findex: org-cycle + #+vindex: org-cycle-include-plain-lists + Items can be folded just like headline levels. Normally this works + only if point is on a plain list item. For more details, see the + variable ~org-cycle-include-plain-lists~. If this variable is set + to ~integrate~, plain list items are treated like low-level + headlines. The level of an item is then given by the indentation of + the bullet/number. Items are always subordinate to real headlines, + however; the hierarchies remain completely separated. In a new item + with no text yet, the first {{{kbd(TAB)}}} demotes the item to + become a child of the previous one. Subsequent {{{kbd(TAB)}}}s move + the item to meaningful levels in the list and eventually get it back + to its initial position. + +- {{{kbd(M-RET)}}} (~org-insert-heading~) :: + + #+kindex: M-RET + #+findex: org-insert-heading + #+vindex: org-M-RET-may-split-line + Insert new item at current level. With a prefix argument, force + a new heading (see [[*Structure Editing]]). If this command is used in + the middle of an item, that item is /split/ in two, and the second + part becomes the new item[fn:13]. If this command is executed + /before item's body/, the new item is created /before/ the current + one. + +- {{{kbd(M-S-RET)}}} :: + + #+kindex: M-S-RET + Insert a new item with a checkbox (see [[*Checkboxes]]). + +- {{{kbd(S-UP)}}}, {{{kbd(S-DOWN)}}} :: + + #+kindex: S-UP + #+kindex: S-DOWN + #+cindex: shift-selection-mode + #+vindex: org-support-shift-select + #+vindex: org-list-use-circular-motion + Jump to the previous/next item in the current list, but only if + ~org-support-shift-select~ is off[fn:14]. If not, you can still use + paragraph jumping commands like {{{kbd(C-UP)}}} and + {{{kbd(C-DOWN)}}} to quite similar effect. + +- {{{kbd(M-UP)}}}, {{{kbd(M-DOWN)}}} :: + + #+kindex: M-UP + #+kindex: M-DOWN + Move the item including subitems up/down[fn:15], i.e., swap with + previous/next item of same indentation. If the list is ordered, + renumbering is automatic. + +- {{{kbd(M-LEFT)}}}, {{{kbd(M-RIGHT)}}} :: + + #+kindex: M-LEFT + #+kindex: M-RIGHT + Decrease/increase the indentation of an item, leaving children + alone. + +- {{{kbd(M-S-LEFT)}}}, {{{kbd(M-S-RIGHT)}}} :: + + #+kindex: M-S-LEFT + #+kindex: M-S-RIGHT + Decrease/increase the indentation of the item, including subitems. + Initially, the item tree is selected based on current indentation. + When these commands are executed several times in direct succession, + the initially selected region is used, even if the new indentation + would imply a different hierarchy. To use the new hierarchy, break + the command chain by moving point. + + As a special case, using this command on the very first item of + a list moves the whole list. This behavior can be disabled by + configuring ~org-list-automatic-rules~. The global indentation of + a list has no influence on the text /after/ the list. + +- {{{kbd(C-c C-c)}}} :: + + #+kindex: C-c C-c + If there is a checkbox (see [[*Checkboxes]]) in the item line, toggle + the state of the checkbox. In any case, verify bullets and + indentation consistency in the whole list. + +- {{{kbd(C-c -)}}} :: + + #+kindex: C-c - + #+vindex: org-plain-list-ordered-item-terminator + Cycle the entire list level through the different itemize/enumerate + bullets (=-=, =+=, =*=, =1.=, =1)=) or a subset of them, depending + on ~org-plain-list-ordered-item-terminator~, the type of list, and + its indentation. With a numeric prefix argument N, select the Nth + bullet from this list. If there is an active region when calling + this, all lines are converted to list items. With a prefix + argument, the selected text is changed into a single item. If the + first line already was a list item, any item marker is removed from + the list. Finally, even without an active region, a normal line is + converted into a list item. + +- {{{kbd(C-c *)}}} :: + + #+kindex: C-c * + Turn a plain list item into a headline---so that it becomes + a subheading at its location. See [[*Structure Editing]], for + a detailed explanation. + +- {{{kbd(C-c C-*)}}} :: + + #+kindex: C-c C-* + Turn the whole plain list into a subtree of the current heading. + Checkboxes (see [[*Checkboxes]]) become =TODO=, respectively =DONE=, + keywords when unchecked, respectively checked. + +- {{{kbd(S-LEFT)}}}, {{{kbd(S-RIGHT)}}} :: + + #+vindex: org-support-shift-select + #+kindex: S-LEFT + #+kindex: S-RIGHT + This command also cycles bullet styles when point is in on the + bullet or anywhere in an item line, details depending on + ~org-support-shift-select~. + +- {{{kbd(C-c ^)}}} :: + + #+kindex: C-c ^ + #+cindex: sorting, of plain list + Sort the plain list. Prompt for the sorting method: numerically, + alphabetically, by time, or by custom function. + +** Drawers +:PROPERTIES: +:DESCRIPTION: Tucking stuff away. +:END: +#+cindex: drawers +#+cindex: visibility cycling, drawers + +Sometimes you want to keep information associated with an entry, but +you normally do not want to see it. For this, Org mode has /drawers/. +They can contain anything but a headline and another drawer. Drawers +look like this: + +#+begin_example +,** This is a headline +Still outside the drawer +:DRAWERNAME: +This is inside the drawer. +:END: +After the drawer. +#+end_example + +#+kindex: C-c C-x d +#+findex: org-insert-drawer +You can interactively insert a drawer at point by calling +~org-insert-drawer~, which is bound to {{{kbd(C-c C-x d)}}}. With an +active region, this command puts the region inside the drawer. With +a prefix argument, this command calls ~org-insert-property-drawer~, +which creates a =PROPERTIES= drawer right below the current headline. +Org mode uses this special drawer for storing properties (see +[[*Properties and Columns]]). You cannot use it for anything else. + +Completion over drawer keywords is also possible using +{{{kbd(M-TAB)}}}[fn:16]. + +Visibility cycling (see [[*Visibility Cycling]]) on the headline hides and +shows the entry, but keep the drawer collapsed to a single line. In +order to look inside the drawer, you need to move point to the drawer +line and press {{{kbd(TAB)}}} there. + +You can also arrange for state change notes (see [[Tracking TODO state +changes]]) and clock times (see [[*Clocking Work Time]]) to be stored in +a =LOGBOOK= drawer. If you want to store a quick note there, in +a similar way to state changes, use + +- {{{kbd(C-c C-z)}}} :: + + #+kindex: C-c C-z + Add a time-stamped note to the =LOGBOOK= drawer. + +** Blocks +:PROPERTIES: +:DESCRIPTION: Folding blocks. +:END: +#+vindex: org-hide-block-startup +#+cindex: blocks, folding + +Org mode uses =#+BEGIN= ... =#+END= blocks for various purposes from +including source code examples (see [[*Literal Examples]]) to capturing +time logging information (see [[*Clocking Work Time]]). These blocks can +be folded and unfolded by pressing {{{kbd(TAB)}}} in the =#+BEGIN= +line. You can also get all blocks folded at startup by configuring +the variable ~org-hide-block-startup~ or on a per-file basis by using + +#+cindex: STARTUP, keyword +#+begin_example +,#+STARTUP: hideblocks +,#+STARTUP: nohideblocks +#+end_example + +* Tables +:PROPERTIES: +:DESCRIPTION: Pure magic for quick formatting. +:END: +#+cindex: tables +#+cindex: editing tables + +Org comes with a fast and intuitive table editor. Spreadsheet-like +calculations are supported using the Emacs Calc package (see [[info:calc][GNU Emacs +Calculator Manual]]). + +** Built-in Table Editor +:PROPERTIES: +:DESCRIPTION: Simple tables. +:END: +#+cindex: table editor, built-in + +#+cindex: header lines, in tables +#+cindex: horizontal rule, in tables +#+cindex: row separator, in tables +#+cindex: table syntax +Org makes it easy to format tables in plain ASCII. Any line with =|= +as the first non-whitespace character is considered part of a table. +=|= is also the column separator[fn:17]. Moreover, a line starting +with =|-= is a horizontal rule. It separates rows explicitly. Rows +before the first horizontal rule are header lines. A table might look +like this: + +#+begin_example +| Name | Phone | Age | +|-------+-------+-----| +| Peter | 1234 | 17 | +| Anna | 4321 | 25 | +#+end_example + +A table is re-aligned automatically each time you press +{{{kbd(TAB)}}}, {{{kbd(RET)}}} or {{{kbd(C-c C-c)}}} inside the table. +{{{kbd(TAB)}}} also moves to the next field---{{{kbd(RET)}}} to the +next row---and creates new table rows at the end of the table or +before horizontal lines. The indentation of the table is set by the +first line. Horizontal rules are automatically expanded on every +re-align to span the whole table width. So, to create the above +table, you would only type + +#+begin_example +|Name|Phone|Age| +|- +#+end_example + +#+texinfo: @noindent +and then press {{{kbd(TAB)}}} to align the table and start filling in +fields. Even faster would be to type =|Name|Phone|Age= followed by +{{{kbd(C-c RET)}}}. + +When typing text into a field, Org treats {{{kbd(DEL)}}}, +{{{kbd(Backspace)}}}, and all character keys in a special way, so that +inserting and deleting avoids shifting other fields. Also, when +typing /immediately/ after point was moved into a new field with +{{{kbd(TAB)}}}, {{{kbd(S-TAB)}}} or {{{kbd(RET)}}}, the field is +automatically made blank. If this behavior is too unpredictable for +you, configure the option ~org-table-auto-blank-field~. + +*** Creation and conversion +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c |)}}} (~org-table-create-or-convert-from-region~) :: + + #+kindex: C-c | + #+findex: org-table-create-or-convert-from-region + Convert the active region to table. If every line contains at least + one {{{kbd(TAB)}}} character, the function assumes that the material + is tab separated. If every line contains a comma, comma-separated + values (CSV) are assumed. If not, lines are split at whitespace + into fields. You can use a prefix argument to force a specific + separator: {{{kbd(C-u)}}} forces CSV, {{{kbd(C-u C-u)}}} forces + {{{kbd(TAB)}}}, {{{kbd(C-u C-u C-u)}}} prompts for a regular + expression to match the separator, and a numeric argument + N indicates that at least N consecutive spaces, or alternatively + a {{{kbd(TAB)}}} will be the separator. + + If there is no active region, this command creates an empty Org + table. But it is easier just to start typing, like {{{kbd(| + N a m e | P h o n e | A g e RET | - TAB)}}}. + +*** Re-aligning and field motion +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c C-c)}}} (~org-table-align~) :: + + #+kindex: C-c C-c + #+findex: org-table-align + Re-align the table without moving point. + +- {{{kbd(TAB)}}} (~org-table-next-field~) :: + + #+kindex: TAB + #+findex: org-table-next-field + Re-align the table, move to the next field. Creates a new row if + necessary. + +- {{{kbd(M-x org-table-blank-field)}}} :: + + #+findex: org-table-blank-field + Blank the field at point. + +- {{{kbd(S-TAB)}}} (~org-table-previous-field~) :: + + #+kindex: S-TAB + #+findex: org-table-previous-field + Re-align, move to previous field. + +- {{{kbd(RET)}}} (~org-table-next-row~) :: + + #+kindex: RET + #+findex: org-table-next-row + Re-align the table and move down to next row. Creates a new row if + necessary. At the beginning or end of a line, {{{kbd(RET)}}} still + inserts a new line, so it can be used to split a table. + +- {{{kbd(M-a)}}} (~org-table-beginning-of-field~) :: + + #+kindex: M-a + #+findex: org-table-beginning-of-field + Move to beginning of the current table field, or on to the previous + field. + +- {{{kbd(M-e)}}} (~org-table-end-of-field~) :: + + #+kindex: M-e + #+findex: org-table-end-of-field + Move to end of the current table field, or on to the next field. + +*** Column and row editing +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(M-LEFT)}}} (~org-table-move-column-left~) :: + + #+kindex: M-LEFT + #+findex: org-table-move-column-left + Move the current column left. + +- {{{kbd(M-RIGHT)}}} (~org-table-move-column-right~) :: + + #+kindex: M-RIGHT + #+findex: org-table-move-column-right + Move the current column right. + +- {{{kbd(M-S-LEFT)}}} (~org-table-delete-column~) :: + + #+kindex: M-S-LEFT + #+findex: org-table-delete-column + Kill the current column. + +- {{{kbd(M-S-RIGHT)}}} (~org-table-insert-column~) :: + + #+kindex: M-S-RIGHT + #+findex: org-table-insert-column + Insert a new column at point position. Move the recent column and + all cells to the right of this column to the right. + +- {{{kbd(M-UP)}}} (~org-table-move-row-up~) :: + + #+kindex: M-UP + #+findex: org-table-move-row-up + Move the current row up. + +- {{{kbd(M-DOWN)}}} (~org-table-move-row-down~) :: + + #+kindex: M-DOWN + #+findex: org-table-move-row-down + Move the current row down. + +- {{{kbd(M-S-UP)}}} (~org-table-kill-row~) :: + + #+kindex: M-S-UP + #+findex: org-table-kill-row + Kill the current row or horizontal line. + +- {{{kbd(S-UP)}}} (~org-table-move-cell-up~) :: + + #+kindex: S-UP + #+findex: org-table-move-cell-up + Move cell up by swapping with adjacent cell. + +- {{{kbd(S-DOWN)}}} (~org-table-move-cell-down~) :: + + #+kindex: S-DOWN + #+findex: org-table-move-cell-down + Move cell down by swapping with adjacent cell. + +- {{{kbd(S-LEFT)}}} (~org-table-move-cell-left~) :: + + #+kindex: S-LEFT + #+findex: org-table-move-cell-left + Move cell left by swapping with adjacent cell. + +- {{{kbd(S-RIGHT)}}} (~org-table-move-cell-right~) :: + + #+kindex: S-RIGHT + #+findex: org-table-move-cell-right + Move cell right by swapping with adjacent cell. + +- {{{kbd(M-S-DOWN)}}} (~org-table-insert-row~) :: + + #+kindex: M-S-DOWN + #+findex: org-table-insert-row + Insert a new row above the current row. With a prefix argument, the + line is created below the current one. + +- {{{kbd(C-c -)}}} (~org-table-insert-hline~) :: + + #+kindex: C-c - + #+findex: org-table-insert-hline + Insert a horizontal line below current row. With a prefix argument, + the line is created above the current line. + +- {{{kbd(C-c RET)}}} (~org-table-hline-and-move~) :: + + #+kindex: C-c RET + #+findex: org-table-hline-and-move + Insert a horizontal line below current row, and move point into the + row below that line. + +- {{{kbd(C-c ^)}}} (~org-table-sort-lines~) :: + + #+kindex: C-c ^ + #+findex: org-table-sort-lines + Sort the table lines in the region. The position of point indicates + the column to be used for sorting, and the range of lines is the + range between the nearest horizontal separator lines, or the entire + table. If point is before the first column, you are prompted for + the sorting column. If there is an active region, the mark + specifies the first line and the sorting column, while point should + be in the last line to be included into the sorting. The command + prompts for the sorting type, alphabetically, numerically, or by + time. You can sort in normal or reverse order. You can also supply + your own key extraction and comparison functions. When called with + a prefix argument, alphabetic sorting is case-sensitive. + +*** Regions +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c C-x M-w)}}} (~org-table-copy-region~) :: + + #+kindex: C-c C-x M-w + #+findex: org-table-copy-region + Copy a rectangular region from a table to a special clipboard. + Point and mark determine edge fields of the rectangle. If there is + no active region, copy just the current field. The process ignores + horizontal separator lines. + +- {{{kbd(C-c C-x C-w)}}} (~org-table-cut-region~) :: + + #+kindex: C-c C-x C-w + #+findex: org-table-cut-region + Copy a rectangular region from a table to a special clipboard, and + blank all fields in the rectangle. So this is the "cut" operation. + +- {{{kbd(C-c C-x C-y)}}} (~org-table-paste-rectangle~) :: + + #+kindex: C-c C-x C-y + #+findex: org-table-paste-rectangle + Paste a rectangular region into a table. The upper left corner ends + up in the current field. All involved fields are overwritten. If + the rectangle does not fit into the present table, the table is + enlarged as needed. The process ignores horizontal separator lines. + +- {{{kbd(M-RET)}}} (~org-table-wrap-region~) :: + + #+kindex: M-RET + #+findex: org-table-wrap-region + Split the current field at point position and move the rest to the + line below. If there is an active region, and both point and mark + are in the same column, the text in the column is wrapped to minimum + width for the given number of lines. A numeric prefix argument may + be used to change the number of desired lines. If there is no + region, but you specify a prefix argument, the current field is made + blank, and the content is appended to the field above. + +*** Calculations +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: formula, in tables +#+cindex: calculations, in tables + +- {{{kbd(C-c +)}}} (~org-table-sum~) :: + + #+kindex: C-c + + #+findex: org-table-sum + Sum the numbers in the current column, or in the rectangle defined + by the active region. The result is shown in the echo area and can + be inserted with {{{kbd(C-y)}}}. + +- {{{kbd(S-RET)}}} (~org-table-copy-down~) :: + + #+kindex: S-RET + #+findex: org-table-copy-down + #+vindex: org-table-copy-increment + When current field is empty, copy from first non-empty field above. + When not empty, copy current field down to next row and move point + along with it. + + Depending on the variable ~org-table-copy-increment~, integer and + time stamp field values, and fields prefixed or suffixed with + a whole number, can be incremented during copy. Also, a ~0~ prefix + argument temporarily disables the increment. + + This key is also used by shift-selection and related modes (see + [[*Packages that conflict with Org mode]]). + +*** Miscellaneous +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c `)}}} (~org-table-edit-field~) :: + + #+kindex: C-c ` + #+findex: org-table-edit-field + Edit the current field in a separate window. This is useful for + fields that are not fully visible (see [[*Column Width and Alignment]]). + When called with a {{{kbd(C-u)}}} prefix, just make the full field + visible, so that it can be edited in place. When called with two + {{{kbd(C-u)}}} prefixes, make the editor window follow point through + the table and always show the current field. The follow mode exits + automatically when point leaves the table, or when you repeat this + command with {{{kbd(C-u C-u C-c `)}}}. + +- {{{kbd(M-x org-table-import)}}} :: + + #+findex: org-table-import + Import a file as a table. The table should be TAB or whitespace + separated. Use, for example, to import a spreadsheet table or data + from a database, because these programs generally can write + TAB-separated text files. This command works by inserting the file + into the buffer and then converting the region to a table. Any + prefix argument is passed on to the converter, which uses it to + determine the separator. + +- {{{kbd(C-c |)}}} (~org-table-create-or-convert-from-region~) :: + + #+kindex: C-c | + #+findex: org-table-create-or-convert-from-region + Tables can also be imported by pasting tabular text into the Org + buffer, selecting the pasted text with {{{kbd(C-x C-x)}}} and then + using the {{{kbd(C-c |)}}} command (see [[*Creation and conversion]]). + +- {{{kbd(M-x org-table-export)}}} :: + + #+findex: org-table-export + #+vindex: org-table-export-default-format + Export the table, by default as a TAB-separated file. Use for data + exchange with, for example, spreadsheet or database programs. The + format used to export the file can be configured in the variable + ~org-table-export-default-format~. You may also use properties + =TABLE_EXPORT_FILE= and =TABLE_EXPORT_FORMAT= to specify the file + name and the format for table export in a subtree. Org supports + quite general formats for exported tables. The exporter format is + the same as the format used by Orgtbl radio tables, see [[*Translator + functions]], for a detailed description. + +- {{{kbd(M-x org-table-header-line-mode)}}} :: + + #+findex: org-table-header-line-mode + #+vindex: org-table-header-line-p + Turn on the display of the first data row of the table at point in + the window header line when this first row is not visible anymore in + the buffer. You can activate this minor mode by default by setting + the option ~org-table-header-line-p~ to ~t~. + +- {{{kbd(M-x org-table-transpose-table-at-point)}}} :: + + #+findex: org-table-transpose-table-at-point + Transpose the table at point and eliminate hlines. + +** Column Width and Alignment +:PROPERTIES: +:DESCRIPTION: Overrule the automatic settings. +:END: +#+cindex: narrow columns in tables +#+cindex: alignment in tables + +The width of columns is automatically determined by the table editor. +The alignment of a column is determined automatically from the +fraction of number-like versus non-number fields in the column. + +#+vindex: org-table-automatic-realign +Editing a field may modify alignment of the table. Moving +a contiguous row or column---i.e., using {{{kbd(TAB)}}} or +{{{kbd(RET)}}}---automatically re-aligns it. If you want to disable +this behavior, set ~org-table-automatic-realign~ to ~nil~. In any +case, you can always align manually a table: + +- {{{kbd(C-c C-c)}}} (~org-table-align~) :: + + #+kindex: C-c C-c + #+findex: org-table-align + Align the current table. + +#+vindex: org-startup-align-all-tables +Setting the option ~org-startup-align-all-tables~ re-aligns all tables +in a file upon visiting it. You can also set this option on +a per-file basis with: + +#+begin_example +,#+STARTUP: align +,#+STARTUP: noalign +#+end_example + +Sometimes a single field or a few fields need to carry more text, +leading to inconveniently wide columns. Maybe you want to hide away +several columns or display them with a fixed width, regardless of +content, as shown in the following example. + +#+begin_example +|---+---------------------+--------| |---+-------…+…| +| | <6> | | | | <6> …|…| +| 1 | one | some | ----\ | 1 | one …|…| +| 2 | two | boring | ----/ | 2 | two …|…| +| 3 | This is a long text | column | | 3 | This i…|…| +|---+---------------------+--------| |---+-------…+…| +#+end_example + +To set the width of a column, one field anywhere in the column may +contain just the string == where {{{var(N)}}} specifies the width +as a number of characters. You control displayed width of columns +with the following tools: + +- {{{kbd(C-c TAB)}}} (~org-table-toggle-column-width~) :: + + #+kindex: C-c TAB + #+findex: org-table-toggle-column-width + Shrink or expand current column. + + If a width cookie specifies a width W for the column, shrinking it + displays the first W visible characters only. Otherwise, the column + is shrunk to a single character. + + When called before the first column or after the last one, ask for + a list of column ranges to operate on. + +- {{{kbd(C-u C-c TAB)}}} (~org-table-shrink~) :: + + #+kindex: C-u C-c TAB + #+findex: org-table-shrink + Shrink all columns with a column width. Expand the others. + +- {{{kbd(C-u C-u C-c TAB)}}} (~org-table-expand~) :: + + #+kindex: C-u C-u C-c TAB + #+findex: org-table-expand + Expand all columns. + +To see the full text of a shrunk field, hold the mouse over it: +a tool-tip window then shows the full contents of the field. +Alternatively, {{{kbd(C-h .)}}} (~display-local-help~) reveals them, +too. For convenience, any change near the shrunk part of a column +expands it. + +#+vindex: org-startup-shrink-all-tables +Setting the option ~org-startup-shrink-all-tables~ shrinks all columns +containing a width cookie in a file the moment it is visited. You can +also set this option on a per-file basis with: + +: #+STARTUP: shrink + +If you would like to overrule the automatic alignment of number-rich +columns to the right and of string-rich columns to the left, you can +use ==, == or == in a similar fashion. You may also combine +alignment and field width like this: ==. + +Lines which only contain these formatting cookies are removed +automatically upon exporting the document. + +** Column Groups +:PROPERTIES: +:DESCRIPTION: Grouping to trigger vertical lines. +:END: +#+cindex: grouping columns in tables + +When Org exports tables, it does so by default without vertical lines +because that is visually more satisfying in general. Occasionally +however, vertical lines can be useful to structure a table into groups +of columns, much like horizontal lines can do for groups of rows. In +order to specify column groups, you can use a special row where the +first field contains only =/=. The further fields can either contain +=<= to indicate that this column should start a group, =>= to indicate +the end of a column, or =<>= (no space between =<= and =>=) to make +a column a group of its own. Upon export, boundaries between column +groups are marked with vertical lines. Here is an example: + +#+begin_example +| N | N^2 | N^3 | N^4 | sqrt(n) | sqrt[4](N) | +|---+-----+-----+-----+---------+------------| +| / | < | | > | < | > | +| 1 | 1 | 1 | 1 | 1 | 1 | +| 2 | 4 | 8 | 16 | 1.4142 | 1.1892 | +| 3 | 9 | 27 | 81 | 1.7321 | 1.3161 | +|---+-----+-----+-----+---------+------------| +,#+TBLFM: $2=$1^2::$3=$1^3::$4=$1^4::$5=sqrt($1)::$6=sqrt(sqrt(($1))) +#+end_example + +It is also sufficient to just insert the column group starters after +every vertical line you would like to have: + +#+begin_example +| N | N^2 | N^3 | N^4 | sqrt(n) | sqrt[4](N) | +|---+-----+-----+-----+---------+------------| +| / | < | | | < | | +#+end_example + +** The Orgtbl Minor Mode +:PROPERTIES: +:DESCRIPTION: The table editor as minor mode. +:ALT_TITLE: Orgtbl Mode +:END: +#+cindex: Orgtbl mode +#+cindex: minor mode for tables + +#+findex: orgtbl-mode +If you like the intuitive way the Org table editor works, you might +also want to use it in other modes like Text mode or Mail mode. The +minor mode Orgtbl mode makes this possible. You can always toggle the +mode with {{{kbd(M-x orgtbl-mode)}}}. To turn it on by default, for +example in Message mode, use + +#+begin_src emacs-lisp +(add-hook 'message-mode-hook #'turn-on-orgtbl) +#+end_src + +Furthermore, with some special setup, it is possible to maintain +tables in arbitrary syntax with Orgtbl mode. For example, it is +possible to construct LaTeX tables with the underlying ease and power +of Orgtbl mode, including spreadsheet capabilities. For details, see +[[*Tables in Arbitrary Syntax]]. + +** The Spreadsheet +:PROPERTIES: +:DESCRIPTION: The table editor has spreadsheet capabilities. +:END: +#+cindex: calculations, in tables +#+cindex: spreadsheet capabilities +#+cindex: Calc package + +The table editor makes use of the Emacs Calc package to implement +spreadsheet-like capabilities. It can also evaluate Emacs Lisp forms +to derive fields from other fields. While fully featured, Org's +implementation is not identical to other spreadsheets. For example, +Org knows the concept of a /column formula/ that will be applied to +all non-header fields in a column without having to copy the formula +to each relevant field. There is also a formula debugger, and a +formula editor with features for highlighting fields in the table +corresponding to the references at point in the formula, moving these +references by arrow keys. + +*** References +:PROPERTIES: +:DESCRIPTION: How to refer to another field or range. +:END: +#+cindex: references + +To compute fields in the table from other fields, formulas must +reference other fields or ranges. In Org, fields can be referenced by +name, by absolute coordinates, and by relative coordinates. To find +out what the coordinates of a field are, press {{{kbd(C-c ?)}}} in +that field, or press {{{kbd(C-c })}}} to toggle the display of a grid. + +**** Field references +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: field references +#+cindex: references, to fields +Formulas can reference the value of another field in two ways. Like +in any other spreadsheet, you may reference fields with +a letter/number combination like =B3=, meaning the second field in the +third row. However, Org prefers to use another, more general +representation that looks like this:[fn:18] + +: @ROW$COLUMN + +Column specifications can be absolute like =$1=, =$2=, ..., =$N=, or +relative to the current column, i.e., the column of the field which is +being computed, like =$+1= or =$-2=. =$<= and =$>= are immutable +references to the first and last column, respectively, and you can use +=$>>>= to indicate the third column from the right. + +The row specification only counts data lines and ignores horizontal +separator lines, or "hlines". Like with columns, you can use absolute +row numbers =@1=, =@2=, ..., =@N=, and row numbers relative to the +current row like =@+3= or =@-1=. =@<= and =@>= are immutable +references the first and last row in the table, respectively. You may +also specify the row relative to one of the hlines: =@I= refers to the +first hline, =@II= to the second, etc. =@-I= refers to the first such +line above the current line, =@+I= to the first such line below the +current line. You can also write =@III+2= which is the second data +line after the third hline in the table. + +=@0= and =$0= refer to the current row and column, respectively, i.e., +to the row/column for the field being computed. Also, if you omit +either the column or the row part of the reference, the current +row/column is implied. + +Org's references with /unsigned/ numbers are fixed references in the +sense that if you use the same reference in the formula for two +different fields, the same field is referenced each time. Org's +references with /signed/ numbers are floating references because the +same reference operator can reference different fields depending on +the field being calculated by the formula. + +Here are a few examples: + +#+attr_texinfo: :columns 0.2 0.8 +| =@2$3= | 2nd row, 3rd column (same as =C2=) | +| =$5= | column 5 in the current row (same as =E&=) | +| =@2= | current column, row 2 | +| =@-1$-3= | field one row up, three columns to the left | +| =@-I$2= | field just under hline above current row, column 2 | +| =@>$5= | field in the last row, in column 5 | + +**** Range references +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: range references +#+cindex: references, to ranges +You may reference a rectangular range of fields by specifying two +field references connected by two dots =..=. The ends are included in +the range. If both fields are in the current row, you may simply use +=$2..$7=, but if at least one field is in a different row, you need to +use the general =@ROW$COLUMN= format at least for the first field, +i.e., the reference must start with =@= in order to be interpreted +correctly. Examples: + +#+attr_texinfo: :columns 0.2 0.8 +| =$1..$3= | first three fields in the current row | +| =$P..$Q= | range, using column names (see [[*Advanced features]]) | +| =$<<<..$>>= | start in third column, continue to the last but one | +| =@2$1..@4$3= | nine fields between these two fields (same as =A2..C4=) | +| =@-1$-2..@-1= | 3 fields in the row above, starting from 2 columns on the left | +| =@I..II= | between first and second hline, short for =@I..@II= | + +#+texinfo: @noindent +Range references return a vector of values that can be fed into Calc +vector functions. Empty fields in ranges are normally suppressed, so +that the vector contains only the non-empty fields. For other options +with the mode switches =E=, =N= and examples, see [[*Formula syntax for +Calc]]. + +**** Field coordinates in formulas +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: field coordinates +#+cindex: coordinates, of field +#+cindex: row, of field coordinates +#+cindex: column, of field coordinates +#+vindex: org-table-current-column +#+vindex: org-table-current-dline +One of the very first actions during evaluation of Calc formulas and +Lisp formulas is to substitute =@#= and =$#= in the formula with the +row or column number of the field where the current result will go to. +The traditional Lisp formula equivalents are ~org-table-current-dline~ +and ~org-table-current-column~. Examples: + +- =if(@# % 2, $#, string(""))= :: + + Insert column number on odd rows, set field to empty on even rows. + +- =$2 = '(identity remote(FOO, @@#$1))= :: + + Copy text or values of each row of column 1 of the table named + {{{var(FOO)}}} into column 2 of the current table. + +- =@3 = 2 * remote(FOO, @1$$#)= :: + + Insert the doubled value of each column of row 1 of the table + named {{{var(FOO)}}} into row 3 of the current table. + +#+texinfo: @noindent +For the second and third examples, table {{{var(FOO)}}} must have at +least as many rows or columns as the current table. Note that this is +inefficient[fn:19] for large number of rows. + +**** Named references +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: named references +#+cindex: references, named +#+cindex: name, of column or field +#+cindex: constants, in calculations +#+cindex: @samp{CONSTANTS}, keyword +#+vindex: org-table-formula-constants + +=$name= is interpreted as the name of a column, parameter or constant. +Constants are defined globally through the variable +~org-table-formula-constants~, and locally---for the file---through +a line like this example: + +: #+CONSTANTS: c=299792458. pi=3.14 eps=2.4e-6 + +#+vindex: constants-unit-system +#+pindex: constants.el +Also, properties (see [[*Properties and Columns]]) can be used as +constants in table formulas: for a property =Xyz= use the name +=$PROP_Xyz=, and the property will be searched in the current outline +entry and in the hierarchy above it. If you have the =constants.el= +package, it will also be used to resolve constants, including natural +constants like =$h= for Planck's constant, and units like =$km= for +kilometers[fn:20]. Column names and parameters can be specified in +special table lines. These are described below, see [[*Advanced +features]]. All names must start with a letter, and further consist +of letters and numbers. + +**** Remote references +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: remote references +#+cindex: references, remote +#+cindex: references, to a different table +#+cindex: name, of column or field +#+cindex: @samp{NAME}, keyword +You may also reference constants, fields and ranges from a different +table, either in the current file or even in a different file. The +syntax is + +: remote(NAME,REF) + +#+texinfo: @noindent +where {{{var(NAME)}}} can be the name of a table in the current file +as set by a =#+NAME:= line before the table. It can also be the ID of +an entry, even in a different file, and the reference then refers to +the first table in that entry. {{{var(REF)}}} is an absolute field or +range reference as described above for example =@3$3= or =$somename=, +valid in the referenced table. + +#+cindex: table indirection +When {{{var(NAME)}}} has the format =@ROW$COLUMN=, it is substituted +with the name or ID found in this field of the current table. For +example =remote($1, @@>$2)= \Rightarrow =remote(year_2013, @@>$1)=. The format +=B3= is not supported because it can not be distinguished from a plain +table name or ID. + +*** Formula syntax for Calc +:PROPERTIES: +:DESCRIPTION: Using Calc to compute stuff. +:END: +#+cindex: formula syntax, Calc +#+cindex: syntax, of formulas + +A formula can be any algebraic expression understood by the Emacs Calc +package. Note that Calc has the non-standard convention that =/= has +lower precedence than =*=, so that =a/b*c= is interpreted as +=(a/(b*c))=. Before evaluation by ~calc-eval~ (see [[info:calc#Calling Calc from Your Programs][Calling Calc from +Your Lisp Programs]]), variable substitution takes place according to +the rules described above. + +#+cindex: vectors, in table calculations +The range vectors can be directly fed into the Calc vector functions +like ~vmean~ and ~vsum~. + +#+cindex: format specifier, in spreadsheet +#+cindex: mode, for Calc +#+vindex: org-calc-default-modes +A formula can contain an optional mode string after a semicolon. This +string consists of flags to influence Calc and other modes during +execution. By default, Org uses the standard Calc modes (precision +12, angular units degrees, fraction and symbolic modes off). The +display format, however, has been changed to =(float 8)= to keep +tables compact. The default settings can be configured using the +variable ~org-calc-default-modes~. + +- =p20= :: + + Set the internal Calc calculation precision to 20 digits. + +- =n3=, =s3=, =e2=, =f4= :: + + Normal, scientific, engineering or fixed format of the result of + Calc passed back to Org. Calc formatting is unlimited in precision + as long as the Calc calculation precision is greater. + +- =D=, =R= :: + + Degree and radian angle modes of Calc. + +- =F=, =S= :: + + Fraction and symbolic modes of Calc. + +- =u= :: + + Units simplification mode of Calc. Calc is also a symbolic + calculator and is capable of working with values having a unit, + represented with numerals followed by a unit string in Org table + cells. This mode instructs Calc to simplify the units in the + computed expression before returning the result. + +- =T=, =t=, =U= :: + + Duration computations in Calc or Lisp, [[*Durations and time values]]. + +- =E= :: + + If and how to consider empty fields. Without =E= empty fields in + range references are suppressed so that the Calc vector or Lisp list + contains only the non-empty fields. With =E= the empty fields are + kept. For empty fields in ranges or empty field references the + value =nan= (not a number) is used in Calc formulas and the empty + string is used for Lisp formulas. Add =N= to use 0 instead for both + formula types. For the value of a field the mode =N= has higher + precedence than =E=. + +- =N= :: + + Interpret all fields as numbers, use 0 for non-numbers. See the + next section to see how this is essential for computations with Lisp + formulas. In Calc formulas it is used only occasionally because + there number strings are already interpreted as numbers without =N=. + +- =L= :: + + Literal, for Lisp formulas only. See the next section. + +Unless you use large integer numbers or high-precision calculation and +display for floating point numbers you may alternatively provide +a ~printf~ format specifier to reformat the Calc result after it has +been passed back to Org instead of letting Calc already do the +formatting[fn:21]. A few examples: + +| =$1+$2= | Sum of first and second field | +| =$1+$2;%.2f= | Same, format result to two decimals | +| =exp($2)+exp($1)= | Math functions can be used | +| =$0;%.1f= | Reformat current cell to 1 decimal | +| =($3-32)*5/9= | Degrees F \to C conversion | +| =$c/$1/$cm= | Hz \to cm conversion, using =constants.el= | +| =tan($1);Dp3s1= | Compute in degrees, precision 3, display SCI 1 | +| =sin($1);Dp3%.1e= | Same, but use ~printf~ specifier for display | +| =vmean($2..$7)= | Compute column range mean, using vector function | +| =vmean($2..$7);EN= | Same, but treat empty fields as 0 | +| =taylor($3,x=7,2)= | Taylor series of $3, at x=7, second degree | + +Calc also contains a complete set of logical operations (see [[info:calc#Logical Operations][Logical +Operations]]). For example + +- =if($1 < 20, teen, string(""))= :: + + ="teen"= if age =$1= is less than 20, else the Org table result + field is set to empty with the empty string. + +- =if("$1" =​= "nan" || "$2" =​= "nan", string(""), $1 + $2); E f-1= :: + + Sum of the first two columns. When at least one of the input fields + is empty the Org table result field is set to empty. =E= is + required to not convert empty fields to 0. =f-1= is an optional + Calc format string similar to =%.1f= but leaves empty results empty. + +- =if(typeof(vmean($1..$7)) =​= 12, string(""), vmean($1..$7); E= :: + + Mean value of a range unless there is any empty field. Every field + in the range that is empty is replaced by =nan= which lets =vmean= + result in =nan=. Then =typeof == 12= detects the =nan= from ~vmean~ + and the Org table result field is set to empty. Use this when the + sample set is expected to never have missing values. + +- =if("$1..$7" =​= "[]", string(""), vmean($1..$7))= :: + + Mean value of a range with empty fields skipped. Every field in the + range that is empty is skipped. When all fields in the range are + empty the mean value is not defined and the Org table result field + is set to empty. Use this when the sample set can have a variable + size. + +- =vmean($1..$7); EN= :: + + To complete the example before: Mean value of a range with empty + fields counting as samples with value 0. Use this only when + incomplete sample sets should be padded with 0 to the full size. + +You can add your own Calc functions defined in Emacs Lisp with +~defmath~ and use them in formula syntax for Calc. + +*** Emacs Lisp forms as formulas +:PROPERTIES: +:DESCRIPTION: Writing formulas in Emacs Lisp. +:ALT_TITLE: Formula syntax for Lisp +:END: +#+cindex: Lisp forms, as table formulas + +It is also possible to write a formula in Emacs Lisp. This can be +useful for string manipulation and control structures, if Calc's +functionality is not enough. + +A formula is evaluated as a Lisp form when it starts with a +single-quote followed by an opening parenthesis. Cell table +references are interpolated into the Lisp form before execution. The +evaluation should return either a string or a number. Evaluation +modes and a ~printf~ format used to render the returned values can be +specified after a semicolon. + +By default, references are interpolated as literal Lisp strings: the +field content is replaced in the Lisp form stripped of leading and +trailing white space and surrounded in double-quotes. For example: + +: '(concat $1 $2) + +#+texinfo: @noindent +concatenates the content of columns 1 and column 2. + +When the =N= flag is used, all referenced elements are parsed as +numbers and interpolated as Lisp numbers, without quotes. Fields that +cannot be parsed as numbers are interpolated as zeros. For example: + +: '(+ $1 $2);N + +#+texinfo: @noindent +adds columns 1 and 2, equivalent to Calc's =$1+$2=. Ranges are +inserted as space-separated fields, so they can be embedded in list or +vector syntax. For example: + +: '(apply '+ '($1..$4));N + +#+texinfo: @noindent +computes the sum of columns 1 to 4, like Calc's =vsum($1..$4)=. + +When the =L= flag is used, all fields are interpolated literally: the +cell content is replaced in the Lisp form stripped of leading and +trailing white space and without quotes. If a reference is intended +to be interpreted as a string by the Lisp form, the reference operator +itself should be enclosed in double-quotes, like ="$3"=. The =L= flag +is useful when strings and numbers are used in the same Lisp form. For +example: + +: '(substring "$1" $2 $3);L + +#+texinfo: @noindent +extracts the part of the string in column 1 between the character +positions specified in the integers in column 2 and 3 and it is easier +to read than the equivalent: + +: '(substring $1 (string-to-number $2) (string-to-number $3)) + +*** Durations and time values +:PROPERTIES: +:DESCRIPTION: How to compute durations and time values. +:END: +#+cindex: duration, computing +#+cindex: time, computing +#+vindex: org-table-duration-custom-format + +If you want to compute time values use the =T=, =t=, or =U= flag, +either in Calc formulas or Elisp formulas: + +#+begin_example +| Task 1 | Task 2 | Total | +|---------+----------+----------| +| 2:12 | 1:47 | 03:59:00 | +| 2:12 | 1:47 | 03:59 | +| 3:02:20 | -2:07:00 | 0.92 | +,#+TBLFM: @2$3=$1+$2;T::@3$3=$1+$2;U::@4$3=$1+$2;t +#+end_example + +Input duration values must be of the form =HH:MM[:SS]=, where seconds +are optional. With the =T= flag, computed durations are displayed as +=HH:MM:SS= (see the first formula above). With the =U= flag, seconds +are omitted so that the result is only =HH:MM= (see second formula +above). Zero-padding of the hours field depends upon the value of the +variable ~org-table-duration-hour-zero-padding~. + +With the =t= flag, computed durations are displayed according to the +value of the option ~org-table-duration-custom-format~, which defaults +to ~hours~ and displays the result as a fraction of hours (see the +third formula in the example above). + +Negative duration values can be manipulated as well, and integers are +considered as seconds in addition and subtraction. + +*** Field and range formulas +:PROPERTIES: +:DESCRIPTION: Formula for specific (ranges of) fields. +:END: +#+cindex: field formula +#+cindex: range formula +#+cindex: formula, for individual table field +#+cindex: formula, for range of fields + +To assign a formula to a particular field, type it directly into the +field, preceded by =:==, for example =vsum(@II..III)=. When you press +{{{kbd(TAB)}}} or {{{kbd(RET)}}} or {{{kbd(C-c C-c)}}} with point +still in the field, the formula is stored as the formula for this +field, evaluated, and the current field is replaced with the result. + +#+cindex: @samp{TBLFM}, keyword +Formulas are stored in a special =TBLFM= keyword located directly +below the table. If you type the equation in the fourth field of the +third data line in the table, the formula looks like =@3$4=$1+$2=. +When inserting/deleting/swapping column and rows with the appropriate +commands, /absolute references/ (but not relative ones) in stored +formulas are modified in order to still reference the same field. To +avoid this from happening, in particular in range references, anchor +ranges at the table borders (using =@<=, =@>=, =$<=, =$>=), or at +hlines using the =@I= notation. Automatic adaptation of field +references does not happen if you edit the table structure with normal +editing commands---you must fix the formulas yourself. + +Instead of typing an equation into the field, you may also use the +following command + +- {{{kbd(C-u C-c =)}}} (~org-table-eval-formula~) :: + + #+kindex: C-u C-c = + #+findex: org-table-eval-formula + Install a new formula for the current field. The command prompts + for a formula with default taken from the =TBLFM= keyword, + applies it to the current field, and stores it. + +The left-hand side of a formula can also be a special expression in +order to assign the formula to a number of different fields. There is +no keyboard shortcut to enter such range formulas. To add them, use +the formula editor (see [[*Editing and debugging formulas]]) or edit +the =TBLFM= keyword directly. + +- =$2== :: + + Column formula, valid for the entire column. This is so common that + Org treats these formulas in a special way, see [[*Column formulas]]. + +- =@3== :: + + Row formula, applies to all fields in the specified row. =@>== + means the last row. + +- =@1$2..@4$3== :: + + Range formula, applies to all fields in the given rectangular range. + This can also be used to assign a formula to some but not all fields + in a row. + +- =$NAME== :: + + Named field, see [[*Advanced features]]. + +*** Column formulas +:PROPERTIES: +:DESCRIPTION: Formulas valid for an entire column. +:END: +#+cindex: column formula +#+cindex: formula, for table column + +When you assign a formula to a simple column reference like =$3==, the +same formula is used in all fields of that column, with the following +very convenient exceptions: (i) If the table contains horizontal +separator hlines with rows above and below, everything before the +first such hline is considered part of the table /header/ and is not +modified by column formulas. Therefore a header is mandatory when you +use column formulas and want to add hlines to group rows, like for +example to separate a total row at the bottom from the summand rows +above. (ii) Fields that already get a value from a field/range +formula are left alone by column formulas. These conditions make +column formulas very easy to use. + +To assign a formula to a column, type it directly into any field in +the column, preceded by an equal sign, like ==$1+$2=. When you press +{{{kbd(TAB)}}} or {{{kbd(RET)}}} or {{{kbd(C-c C-c)}}} with point +still in the field, the formula is stored as the formula for the +current column, evaluated and the current field replaced with the +result. If the field contains only ===, the previously stored formula +for this column is used. For each column, Org only remembers the most +recently used formula. In the =TBLFM= keyword, column formulas look +like =$4=$1+$2=. The left-hand side of a column formula can not be +the name of column, it must be the numeric column reference or =$>=. + +Instead of typing an equation into the field, you may also use the +following command: + +- {{{kbd(C-c =)}}} (~org-table-eval-formula~) :: + + #+kindex: C-c = + #+findex: org-table-eval-formula + Install a new formula for the current column and replace current + field with the result of the formula. The command prompts for + a formula, with default taken from the =TBLFM= keyword, applies it + to the current field and stores it. With a numeric prefix argument, + e.g., {{{kbd(C-5 C-c =)}}}, the command applies it to that many + consecutive fields in the current column. + +*** Lookup functions +:PROPERTIES: +:DESCRIPTION: Lookup functions for searching tables. +:END: +#+cindex: lookup functions in tables +#+cindex: table lookup functions + +Org has three predefined Emacs Lisp functions for lookups in tables. + +- =(org-lookup-first VAL S-LIST R-LIST &optional PREDICATE)= :: + + #+findex: org-lookup-first + Searches for the first element {{{var(S)}}} in list + {{{var(S-LIST)}}} for which + #+begin_src emacs-lisp + (PREDICATE VAL S) + #+end_src + is non-~nil~; returns the value from the corresponding position in + list {{{var(R-LIST)}}}. The default {{{var(PREDICATE)}}} is + ~equal~. Note that the parameters {{{var(VAL)}}} and {{{var(S)}}} + are passed to {{{var(PREDICATE)}}} in the same order as the + corresponding parameters are in the call to ~org-lookup-first~, + where {{{var(VAL)}}} precedes {{{var(S-LIST)}}}. If + {{{var(R-LIST)}}} is ~nil~, the matching element {{{var(S)}}} of + {{{var(S-LIST)}}} is returned. + +- =(org-lookup-last VAL S-LIST R-LIST &optional PREDICATE)= :: + + #+findex: org-lookup-last + Similar to ~org-lookup-first~ above, but searches for the /last/ + element for which {{{var(PREDICATE)}}} is non-~nil~. + +- =(org-lookup-all VAL S-LIST R-LIST &optional PREDICATE)= :: + + #+findex: org-lookup-all + Similar to ~org-lookup-first~, but searches for /all/ elements for + which {{{var(PREDICATE)}}} is non-~nil~, and returns /all/ + corresponding values. This function can not be used by itself in + a formula, because it returns a list of values. However, powerful + lookups can be built when this function is combined with other Emacs + Lisp functions. + +If the ranges used in these functions contain empty fields, the =E= +mode for the formula should usually be specified: otherwise empty +fields are not included in {{{var(S-LIST)}}} and/or {{{var(R-LIST)}}} +which can, for example, result in an incorrect mapping from an element +of {{{var(S-LIST)}}} to the corresponding element of +{{{var(R-LIST)}}}. + +These three functions can be used to implement associative arrays, +count matching cells, rank results, group data, etc. For practical +examples see [[https://orgmode.org/worg/org-tutorials/org-lookups.html][this tutorial on Worg]]. + +*** Editing and debugging formulas +:PROPERTIES: +:DESCRIPTION: Fixing formulas. +:END: +#+cindex: formula editing +#+cindex: editing, of table formulas + +#+vindex: org-table-use-standard-references +You can edit individual formulas in the minibuffer or directly in the +field. Org can also prepare a special buffer with all active formulas +of a table. When offering a formula for editing, Org converts +references to the standard format (like =B3= or =D&=) if possible. If +you prefer to only work with the internal format (like =@3$2= or +=$4=), configure the variable ~org-table-use-standard-references~. + +- {{{kbd(C-c =)}}} or {{{kbd(C-u C-c =)}}} (~org-table-eval-formula~) :: + + #+kindex: C-c = + #+kindex: C-u C-c = + #+findex: org-table-eval-formula + Edit the formula associated with the current column/field in the + minibuffer. See [[*Column formulas]], and [[*Field and range formulas]]. + +- {{{kbd(C-u C-u C-c =)}}} (~org-table-eval-formula~) :: + + #+kindex: C-u C-u C-c = + #+findex: org-table-eval-formula + Re-insert the active formula (either a field formula, or a column + formula) into the current field, so that you can edit it directly in + the field. The advantage over editing in the minibuffer is that you + can use the command {{{kbd(C-c ?)}}}. + +- {{{kbd(C-c ?)}}} (~org-table-field-info~) :: + + #+kindex: C-c ? + #+findex: org-table-field-info + While editing a formula in a table field, highlight the field(s) + referenced by the reference at point position in the formula. + +- {{{kbd(C-c })}}} (~org-table-toggle-coordinate-overlays~) :: + + #+kindex: C-c @} + #+findex: org-table-toggle-coordinate-overlays + Toggle the display of row and column numbers for a table, using + overlays. These are updated each time the table is aligned; you can + force it with {{{kbd(C-c C-c)}}}. + +- {{{kbd(C-c {)}}} (~org-table-toggle-formula-debugger~) :: + + #+kindex: C-c @{ + #+findex: org-table-toggle-formula-debugger + Toggle the formula debugger on and off. See below. + +- {{{kbd(C-c ')}}} (~org-table-edit-formulas~) :: + + #+kindex: C-c ' + #+findex: org-table-edit-formulas + Edit all formulas for the current table in a special buffer, where + the formulas are displayed one per line. If the current field has + an active formula, point in the formula editor marks it. While + inside the special buffer, Org automatically highlights any field or + range reference at point position. You may edit, remove and add + formulas, and use the following commands: + + - {{{kbd(C-c C-c)}}} or {{{kbd(C-x C-s)}}} (~org-table-fedit-finish~) :: + + #+kindex: C-x C-s + #+kindex: C-c C-c + #+findex: org-table-fedit-finish + Exit the formula editor and store the modified formulas. With + {{{kbd(C-u)}}} prefix, also apply the new formulas to the + entire table. + + - {{{kbd(C-c C-q)}}} (~org-table-fedit-abort~) :: + + #+kindex: C-c C-q + #+findex: org-table-fedit-abort + Exit the formula editor without installing changes. + + - {{{kbd(C-c C-r)}}} (~org-table-fedit-toggle-ref-type~) :: + + #+kindex: C-c C-r + #+findex: org-table-fedit-toggle-ref-type + Toggle all references in the formula editor between standard (like + =B3=) and internal (like =@3$2=). + + - {{{kbd(TAB)}}} (~org-table-fedit-lisp-indent~) :: + + #+kindex: TAB + #+findex: org-table-fedit-lisp-indent + Pretty-print or indent Lisp formula at point. When in a line + containing a Lisp formula, format the formula according to Emacs + Lisp rules. Another {{{kbd(TAB)}}} collapses the formula back + again. In the open formula, {{{kbd(TAB)}}} re-indents just like + in Emacs Lisp mode. + + - {{{kbd(M-TAB)}}} (~lisp-complete-symbol~) :: + + #+kindex: M-TAB + #+findex: lisp-complete-symbol + Complete Lisp symbols, just like in Emacs Lisp mode. + + - {{{kbd(S-UP)}}}, {{{kbd(S-DOWN)}}}, {{{kbd(S-LEFT)}}}, {{{kbd(S-RIGHT)}}} :: + + #+kindex: S-UP + #+kindex: S-DOWN + #+kindex: S-LEFT + #+kindex: S-RIGHT + #+findex: org-table-fedit-ref-up + #+findex: org-table-fedit-ref-down + #+findex: org-table-fedit-ref-left + #+findex: org-table-fedit-ref-right + Shift the reference at point. For example, if the reference is + =B3= and you press {{{kbd(S-RIGHT)}}}, it becomes =C3=. This also + works for relative references and for hline references. + + - {{{kbd(M-S-UP)}}} (~org-table-fedit-line-up~) :: + + #+kindex: M-S-UP + #+findex: org-table-fedit-line-up + Move the test line for column formulas up in the Org buffer. + + - {{{kbd(M-S-DOWN)}}} (~org-table-fedit-line-down~) :: + + #+kindex: M-S-DOWN + #+findex: org-table-fedit-line-down + Move the test line for column formulas down in the Org buffer. + + - {{{kbd(M-UP)}}} (~org-table-fedit-scroll-up~) :: + + #+kindex: M-UP + #+findex: org-table-fedit-scroll-up + Scroll up the window displaying the table. + + - {{{kbd(M-DOWN)}}} (~org-table-fedit-scroll-down~) :: + + #+kindex: M-DOWN + #+findex: org-table-fedit-scroll-down + Scroll down the window displaying the table. + + - {{{kbd(C-c })}}} :: + + #+kindex: C-c @} + #+findex: org-table-toggle-coordinate-overlays + Turn the coordinate grid in the table on and off. + +Making a table field blank does not remove the formula associated with +the field, because that is stored in a different line---the =TBLFM= +keyword line. During the next recalculation, the field will be filled +again. To remove a formula from a field, you have to give an empty +reply when prompted for the formula, or to edit the =TBLFM= keyword. + +#+kindex: C-c C-c +You may edit the =TBLFM= keyword directly and re-apply the changed +equations with {{{kbd(C-c C-c)}}} in that line or with the normal +recalculation commands in the table. + +**** Using multiple =TBLFM= lines +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: multiple formula lines +#+cindex: @samp{TBLFM} keywords, multiple +#+cindex: @samp{TBLFM}, switching + +#+kindex: C-c C-c +You may apply the formula temporarily. This is useful when you want +to switch the formula applied to the table. Place multiple =TBLFM= +keywords right after the table, and then press {{{kbd(C-c C-c)}}} on +the formula to apply. Here is an example: + +#+begin_example +| x | y | +|---+---| +| 1 | | +| 2 | | +,#+TBLFM: $2=$1*1 +,#+TBLFM: $2=$1*2 +#+end_example + +#+texinfo: @noindent +Pressing {{{kbd(C-c C-c)}}} in the line of =#+TBLFM: $2=$1*2= yields: + +#+begin_example +| x | y | +|---+---| +| 1 | 2 | +| 2 | 4 | +,#+TBLFM: $2=$1*1 +,#+TBLFM: $2=$1*2 +#+end_example + +#+texinfo: @noindent +If you recalculate this table, with {{{kbd(C-u C-c *)}}}, for example, +you get the following result from applying only the first =TBLFM= +keyword. + +#+begin_example +| x | y | +|---+---| +| 1 | 1 | +| 2 | 2 | +,#+TBLFM: $2=$1*1 +,#+TBLFM: $2=$1*2 +#+end_example + +**** Debugging formulas +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: formula debugging +#+cindex: debugging, of table formulas + +When the evaluation of a formula leads to an error, the field content +becomes the string =#ERROR=. If you would like to see what is going +on during variable substitution and calculation in order to find +a bug, turn on formula debugging in the Tbl menu and repeat the +calculation, for example by pressing {{{kbd(C-u C-u C-c = RET)}}} in +a field. Detailed information are displayed. + +*** Updating the table +:PROPERTIES: +:DESCRIPTION: Recomputing all dependent fields. +:END: +#+cindex: recomputing table fields +#+cindex: updating, table + +Recalculation of a table is normally not automatic, but needs to be +triggered by a command. To make recalculation at least +semi-automatic, see [[*Advanced features]]. + +In order to recalculate a line of a table or the entire table, use the +following commands: + +- {{{kbd(C-c *)}}} (~org-table-recalculate~) :: + + #+kindex: C-c * + #+findex: org-table-recalculate + Recalculate the current row by first applying the stored column + formulas from left to right, and all field/range formulas in the + current row. + +- {{{kbd(C-u C-c *)}}} or {{{kbd(C-u C-c C-c)}}} :: + + #+kindex: C-u C-c * + #+kindex: C-u C-c C-c + Recompute the entire table, line by line. Any lines before the + first hline are left alone, assuming that these are part of the + table header. + +- {{{kbd(C-u C-u C-c *)}}} or {{{kbd(C-u C-u C-c C-c)}}} (~org-table-iterate~) :: + + #+kindex: C-u C-u C-c * + #+kindex: C-u C-u C-c C-c + #+findex: org-table-iterate + Iterate the table by recomputing it until no further changes occur. + This may be necessary if some computed fields use the value of other + fields that are computed /later/ in the calculation sequence. + +- {{{kbd(M-x org-table-recalculate-buffer-tables)}}} :: + + #+findex: org-table-recalculate-buffer-tables + Recompute all tables in the current buffer. + +- {{{kbd(M-x org-table-iterate-buffer-tables)}}} :: + + #+findex: org-table-iterate-buffer-tables + Iterate all tables in the current buffer, in order to converge + table-to-table dependencies. + +*** Advanced features +:PROPERTIES: +:DESCRIPTION: Field and column names, automatic recalculation... +:END: + +If you want the recalculation of fields to happen automatically, or if +you want to be able to assign /names/[fn:22] to fields and columns, +you need to reserve the first column of the table for special marking +characters. + +- {{{kbd(C-#)}}} (~org-table-rotate-recalc-marks~) :: + + #+kindex: C-# + #+findex: org-table-rotate-recalc-marks + Rotate the calculation mark in first column through the states =#=, + =*=, =!=, =$=. When there is an active region, change all marks in + the region. + +Here is an example of a table that collects exam results of students +and makes use of these features: + +#+begin_example +|---+---------+--------+--------+--------+-------+------| +| | Student | Prob 1 | Prob 2 | Prob 3 | Total | Note | +|---+---------+--------+--------+--------+-------+------| +| ! | | P1 | P2 | P3 | Tot | | +| # | Maximum | 10 | 15 | 25 | 50 | 10.0 | +| ^ | | m1 | m2 | m3 | mt | | +|---+---------+--------+--------+--------+-------+------| +| # | Peter | 10 | 8 | 23 | 41 | 8.2 | +| # | Sam | 2 | 4 | 3 | 9 | 1.8 | +|---+---------+--------+--------+--------+-------+------| +| | Average | | | | 25.0 | | +| ^ | | | | | at | | +| $ | max=50 | | | | | | +|---+---------+--------+--------+--------+-------+------| +,#+TBLFM: $6=vsum($P1..$P3)::$7=10*$Tot/$max;%.1f::$at=vmean(@-II..@-I);%.1f +#+end_example + +#+attr_texinfo: :tag Important +#+begin_quote +Please note that for these special tables, recalculating the table +with {{{kbd(C-u C-c *)}}} only affects rows that are marked =#= or +=*=, and fields that have a formula assigned to the field itself. The +column formulas are not applied in rows with empty first field. +#+end_quote + +#+cindex: marking characters, tables +The marking characters have the following meaning: + +- =!= :: + + The fields in this line define names for the columns, so that you + may refer to a column as =$Tot= instead of =$6=. + +- =^= :: + + This row defines names for the fields /above/ the row. With such + a definition, any formula in the table may use =$m1= to refer to the + value =10=. Also, if you assign a formula to a names field, it is + stored as =$name = ...=. + +- =_= :: + + Similar to =^=, but defines names for the fields in the row /below/. + +- =$= :: + + Fields in this row can define /parameters/ for formulas. For + example, if a field in a =$= row contains =max=50=, then formulas in + this table can refer to the value 50 using =$max=. Parameters work + exactly like constants, only that they can be defined on a per-table + basis. + +- =#= :: + + Fields in this row are automatically recalculated when pressing + {{{kbd(TAB)}}} or {{{kbd(RET)}}} or {{{kbd(S-TAB)}}} in this row. + Also, this row is selected for a global recalculation with + {{{kbd(C-u C-c *)}}}. Unmarked lines are left alone by this + command. + +- =*= :: + + Selects this line for global recalculation with {{{kbd(C-u C-c + *)}}}, but not for automatic recalculation. Use this when automatic + recalculation slows down editing too much. + +- =/= :: + + Do not export this line. Useful for lines that contain the + narrowing == markers or column group markers. + +Finally, just to whet your appetite for what can be done with the +fantastic Calc package, here is a table that computes the Taylor +series of degree n at location x for a couple of functions. + +#+begin_example +|---+-------------+---+-----+--------------------------------------| +| | Func | n | x | Result | +|---+-------------+---+-----+--------------------------------------| +| # | exp(x) | 1 | x | 1 + x | +| # | exp(x) | 2 | x | 1 + x + x^2 / 2 | +| # | exp(x) | 3 | x | 1 + x + x^2 / 2 + x^3 / 6 | +| # | x^2+sqrt(x) | 2 | x=0 | x*(0.5 / 0) + x^2 (2 - 0.25 / 0) / 2 | +| # | x^2+sqrt(x) | 2 | x=1 | 2 + 2.5 x - 2.5 + 0.875 (x - 1)^2 | +| * | tan(x) | 3 | x | 0.0175 x + 1.77e-6 x^3 | +|---+-------------+---+-----+--------------------------------------| +,#+TBLFM: $5=taylor($2,$4,$3);n3 +#+end_example + +** Org Plot +:PROPERTIES: +:DESCRIPTION: Plotting from Org tables. +:END: +#+cindex: graph, in tables +#+cindex: plot tables using Gnuplot + +Org Plot can produce graphs of information stored in Org tables, +either graphically or in ASCII art. + +*** Graphical plots using Gnuplot +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: @samp{PLOT}, keyword +Org Plot can produce 2D and 3D graphs of information stored in Org +tables using [[https://www.gnuplot.info/][Gnuplot]] and [[http://cars9.uchicago.edu/~ravel/software/gnuplot-mode.html][Gnuplot mode]]. To see this in action, ensure +that you have both Gnuplot and Gnuplot mode installed on your system, +then call {{{kbd(C-c \quot g)}}} or {{{kbd(M-x org-plot/gnuplot)}}} on the +following table. + +#+begin_example +,#+PLOT: title:"Citas" ind:1 deps:(3) type:2d with:histograms set:"yrange [0:]" +| Sede | Max cites | H-index | +|-----------+-----------+---------| +| Chile | 257.72 | 21.39 | +| Leeds | 165.77 | 19.68 | +| Sao Paolo | 71.00 | 11.50 | +| Stockholm | 134.19 | 14.33 | +| Morelia | 257.56 | 17.67 | +#+end_example + +Org Plot supports a range of plot types, and provides the ability to add more. +For example, a radar plot can be generated like so: +#+begin_example +,#+PLOT: title:"An evaluation of plaintext document formats" transpose:yes type:radar min:0 max:4 +| Format | Fine-grained-control | Initial Effort | Syntax simplicity | Editor Support | Integrations | Ease-of-referencing | Versatility | +|-------------------+----------------------+----------------+-------------------+----------------+--------------+---------------------+-------------| +| Word | 2 | 4 | 4 | 2 | 3 | 2 | 2 | +| LaTeX | 4 | 1 | 1 | 3 | 2 | 4 | 3 | +| Org Mode | 4 | 2 | 3.5 | 1 | 4 | 4 | 4 | +| Markdown | 1 | 3 | 3 | 4 | 3 | 3 | 1 | +| Markdown + Pandoc | 2.5 | 2.5 | 2.5 | 3 | 3 | 3 | 2 | +#+end_example + +Notice that Org Plot is smart enough to apply the table's headers as +labels. Further control over the labels, type, content, and +appearance of plots can be exercised through the =PLOT= keyword +preceding a table. See below for a complete list of Org Plot options. +For more information and examples see the [[https://orgmode.org/worg/org-tutorials/org-plot.html][Org Plot tutorial]]. + +**** Plot options +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- =set= :: + + Specify any Gnuplot option to be set when graphing. + +- =title= :: + + Specify the title of the plot. + +- =ind= :: + + Specify which column of the table to use as the =x= axis. + +- =deps= :: + + Specify the columns to graph as a Lisp style list, surrounded by + parentheses and separated by spaces for example =dep:(3 4)= to graph + the third and fourth columns. Defaults to graphing all other + columns aside from the =ind= column. + +- transpose :: + + When =y=, =yes=, or =t= attempt to transpose the table data before + plotting. Also recognises the shorthand option =trans=. + +- =type= :: + + Specify the type of the plot, by default one of =2d=, =3d=, =radar=, or =grid=. + Available types can be customised with ~org-plot/preset-plot-types~. + +- =with= :: + + Specify a =with= option to be inserted for every column being + plotted, e.g., =lines=, =points=, =boxes=, =impulses=. Defaults to + =lines=. + +- =file= :: + + If you want to plot to a file, specify + ="path/to/desired/output-file"=. + +- =labels= :: + + List of labels to be used for the =deps=. Defaults to the column + headers if they exist. + +- =line= :: + + Specify an entire line to be inserted in the Gnuplot script. + +- =map= :: + + When plotting =3d= or =grid= types, set this to =t= to graph a flat + mapping rather than a =3d= slope. + +- min :: + + Provides a minimum axis value that may be used by a plot type. + Implicitly assumes the =y= axis is being referred to. Can + explicitly provide a value for a either the =x= or =y= axis with + =xmin= and =ymin=. + +- max :: + + Provides a maximum axis value that may be used by a plot type. + Implicitly assumes the =y= axis is being referred to. Can + explicitly provide a value for a either the =x= or =y= axis with + =xmax= and =ymax=. + +- ticks :: + + Provides a desired number of axis ticks to display, that may be used + by a plot type. If none is given a plot type that requires ticks + will use ~org--plot/sensible-tick-num~ to try to determine a good + value. + +- =timefmt= :: + + Specify format of Org mode timestamps as they will be parsed by + Gnuplot. Defaults to =%Y-%m-%d-%H:%M:%S=. + +- =script= :: + + If you want total control, you can specify a script file---place the + file name between double-quotes---which will be used to plot. + Before plotting, every instance of =$datafile= in the specified + script will be replaced with the path to the generated data file. + Note: even if you set this option, you may still want to specify the + plot type, as that can impact the content of the data file. + +*** ASCII bar plots +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +While point is on a column, typing {{{kbd(C-c " a)}}} or {{{kbd(M-x +orgtbl-ascii-plot)}}} create a new column containing an ASCII-art bars +plot. The plot is implemented through a regular column formula. When +the source column changes, the bar plot may be updated by refreshing +the table, for example typing {{{kbd(C-u C-c *)}}}. + +#+begin_example +| Sede | Max cites | | +|---------------+-----------+--------------| +| Chile | 257.72 | WWWWWWWWWWWW | +| Leeds | 165.77 | WWWWWWWh | +| Sao Paolo | 71.00 | WWW; | +| Stockholm | 134.19 | WWWWWW: | +| Morelia | 257.56 | WWWWWWWWWWWH | +| Rochefourchat | 0.00 | | +,#+TBLFM: $3='(orgtbl-ascii-draw $2 0.0 257.72 12) +#+end_example + +The formula is an Elisp call. + +#+attr_texinfo: :options orgtbl-ascii-draw value min max &optional width +#+begin_defun +Draw an ASCII bar in a table. + +{{{var(VALUE)}}} is the value to plot. + +{{{var(MIN)}}} is the value displayed as an empty bar. {{{var(MAX)}}} +is the value filling all the {{{var(WIDTH)}}}. Sources values outside +this range are displayed as =too small= or =too large=. + +{{{var(WIDTH)}}} is the number of characters of the bar plot. It +defaults to =12=. +#+end_defun + +* Hyperlinks +:PROPERTIES: +:DESCRIPTION: Notes in context. +:END: +#+cindex: hyperlinks + +Like HTML, Org provides support for links inside a file, external +links to other files, Usenet articles, emails, and much more. + +** Link Format +:PROPERTIES: +:DESCRIPTION: How links in Org are formatted. +:END: +#+cindex: link format +#+cindex: format, of links + +#+cindex: angle bracket links +#+cindex: plain links +Org recognizes plain URIs, possibly wrapped within angle +brackets[fn:23], and activate them as clickable links. + +#+cindex: bracket links +The general link format, however, looks like this: + +: [[LINK][DESCRIPTION]] + +#+texinfo: @noindent +or alternatively + +: [[LINK]] + +#+cindex: escape syntax, for links +#+cindex: backslashes, in links +Some =\=, =[= and =]= characters in the {{{var(LINK)}}} part need to +be "escaped", i.e., preceded by another =\= character. More +specifically, the following characters, and only them, must be +escaped: + +1. all =[= and =]= characters, +2. every =\= character preceding either =]= or =[=, +3. every =\= character at the end of the link. + +#+findex: org-link-escape +Functions inserting links (see [[*Handling Links]]) properly escape +ambiguous characters. You only need to bother about the rules above +when inserting directly, or yanking, a URI within square brackets. +When in doubt, you may use the function ~org-link-escape~, which turns +a link string into its escaped form. + +Once a link in the buffer is complete, with all brackets present, Org +changes the display so that =DESCRIPTION= is displayed instead of +=[[LINK][DESCRIPTION]]= and =LINK= is displayed instead of =[[LINK]]=. +Links are highlighted in the ~org-link~ face, which, by default, is an +underlined face. + +You can directly edit the visible part of a link. This can be either +the {{{var(LINK)}}} part, if there is no description, or the +{{{var(DESCRIPTION)}}} part otherwise. To also edit the invisible +{{{var(LINK)}}} part, use {{{kbd(C-c C-l)}}} with point on the link +(see [[*Handling Links]]). + +If you place point at the beginning or just behind the end of the +displayed text and press {{{kbd(BS)}}}, you remove +the---invisible---bracket at that location[fn:24]. This makes the link +incomplete and the internals are again displayed as plain text. +Inserting the missing bracket hides the link internals again. To show +the internal structure of all links, use the menu: Org \rarr Hyperlinks \rarr +Literal links. + +** Internal Links +:PROPERTIES: +:DESCRIPTION: Links to other places in the current file. +:END: +#+cindex: internal links +#+cindex: links, internal + +A link that does not look like a URL---i.e., does not start with +a known scheme or a file name---refers to the current document. You +can follow it with {{{kbd(C-c C-o)}}} when point is on the link, or +with a mouse click (see [[*Handling Links]]). + +#+cindex: @samp{CUSTOM_ID}, property +Org provides several refinements to internal navigation within +a document. Most notably, a construct like =[[#my-custom-id]]= +specifically targets the entry with the =CUSTOM_ID= property set to +=my-custom-id=. Also, an internal link looking like =[[*Some +section]]= points to a headline with the name =Some section=[fn:25]. + +#+cindex: targets, for links +When the link does not belong to any of the cases above, Org looks for +a /dedicated target/: the same string in double angular brackets, like +=<>=. + +#+cindex: @samp{NAME}, keyword +If no dedicated target exists, the link tries to match the exact name +of an element within the buffer. Naming is done, unsurprisingly, with +the =NAME= keyword, which has to be put in the line before the element +it refers to, as in the following example + +#+begin_example +,#+NAME: My Target +| a | table | +|----+------------| +| of | four cells | +#+end_example + +#+vindex: org-link-search-must-match-exact-headline +Ultimately, if none of the above succeeds, Org searches for a headline +that is exactly the link text but may also include a TODO keyword and +tags, or initiates a plain text search, according to the value of +~org-link-search-must-match-exact-headline~. + +Note that you must make sure custom IDs, dedicated targets, and names +are unique throughout the document. Org provides a linter to assist +you in the process, if needed. See [[*Org Syntax]]. + +During export, internal links are used to mark objects and assign them +a number. Marked objects are then referenced by links pointing to +them. In particular, links without a description appear as the number +assigned to the marked object[fn:26]. In the following excerpt from +an Org buffer + +#+begin_example +1. one item +2. <>another item +Here we refer to item [[target]]. +#+end_example + +#+texinfo: @noindent +The last sentence will appear as =Here we refer to item 2= when +exported. + +In non-Org files, the search looks for the words in the link text. In +the above example the search would be for =target=. + +Following a link pushes a mark onto Org's own mark ring. You can +return to the previous position with {{{kbd(C-c &)}}}. Using this +command several times in direct succession goes back to positions +recorded earlier. + +** Radio Targets +:PROPERTIES: +:DESCRIPTION: Make targets trigger links in plain text. +:END: +#+cindex: radio targets +#+cindex: targets, radio +#+cindex: links, radio targets + +Org can automatically turn any occurrences of certain target names in +normal text into a link. So without explicitly creating a link, the +text connects to the target radioing its position. Radio targets are +enclosed by triple angular brackets. For example, a target =<<>>= causes each occurrence of =my target= in normal text to +become activated as a link. The Org file is scanned automatically for +radio targets only when the file is first loaded into Emacs. To +update the target list during editing, press {{{kbd(C-c C-c)}}} with +point on or at a target. + +** External Links +:PROPERTIES: +:DESCRIPTION: URL-like links to the world. +:END: +#+cindex: links, external +#+cindex: external links +#+cindex: attachment links +#+cindex: BBDB links +#+cindex: Elisp links +#+cindex: file links +#+cindex: Gnus links +#+cindex: Help links +#+cindex: IRC links +#+cindex: Info links +#+cindex: MH-E links +#+cindex: Rmail links +#+cindex: shell links +#+cindex: URL links +#+cindex: Usenet links + +Org supports links to files, websites, Usenet and email messages, BBDB +database entries and links to both IRC conversations and their logs. +External links are URL-like locators. They start with a short +identifying string followed by a colon. There can be no space after +the colon. + +Here is the full set of built-in link types: + +- =file= :: + + File links. File name may be remote, absolute, or relative. + + Additionally, you can specify a line number, or a text search. + In Org files, you may link to a headline name, a custom ID, or a + code reference instead. + + As a special case, "file" prefix may be omitted if the file name + is complete, e.g., it starts with =./=, or =/=. + +- =attachment= :: + + Same as file links but for files and folders attached to the current + node (see [[*Attachments]]). Attachment links are intended to behave + exactly as file links but for files relative to the attachment + directory. + +- =bbdb= :: + + Link to a BBDB record, with possible regexp completion. + +- =docview= :: + + Link to a document opened with DocView mode. You may specify a page + number. + +- =doi= :: + + Link to an electronic resource, through its handle. + +- =elisp= :: + + Execute an Elisp command upon activation. + +- =gnus=, =rmail=, =mhe= :: + + Link to messages or folders from a given Emacs' MUA. + +- =help= :: + + Display documentation of a symbol in =*Help*= buffer. + +- =http=, =https= :: + + Web links. + +- =id= :: + + Link to a specific headline by its ID property, in an Org file. + +- =info= :: + + Link to an Info manual, or to a specific node. + +- =irc= :: + + Link to an IRC channel. + +- =mailto= :: + + Link to message composition. + +- =news= :: + + Usenet links. + +- =shell= :: + + Execute a shell command upon activation. + +The following table illustrates the link types above, along with their +options: + +| Link Type | Example | +|------------+----------------------------------------------------------| +| http | =http://staff.science.uva.nl/c.dominik/= | +| https | =https://orgmode.org/= | +| doi | =doi:10.1000/182= | +| file | =file:/home/dominik/images/jupiter.jpg= | +| | =/home/dominik/images/jupiter.jpg= (same as above) | +| | =file:papers/last.pdf= | +| | =./papers/last.pdf= (same as above) | +| | =file:/ssh:me@some.where:papers/last.pdf= (remote) | +| | =/ssh:me@some.where:papers/last.pdf= (same as above) | +| | =file:sometextfile::NNN= (jump to line number) | +| | =file:projects.org= | +| | =file:projects.org::some words= (text search)[fn:27] | +| | =file:projects.org::*task title= (headline search) | +| | =file:projects.org::#custom-id= (headline search) | +| attachment | =attachment:projects.org= | +| | =attachment:projects.org::some words= (text search) | +| docview | =docview:papers/last.pdf::NNN= | +| id | =id:B7423F4D-2E8A-471B-8810-C40F074717E9= | +| news | =news:comp.emacs= | +| mailto | =mailto:adent@galaxy.net= | +| mhe | =mhe:folder= (folder link) | +| | =mhe:folder#id= (message link) | +| rmail | =rmail:folder= (folder link) | +| | =rmail:folder#id= (message link) | +| gnus | =gnus:group= (group link) | +| | =gnus:group#id= (article link) | +| bbdb | =bbdb:R.*Stallman= (record with regexp) | +| irc | =irc:/irc.com/#emacs/bob= | +| help | =help:org-store-link= | +| info | =info:org#External links= | +| shell | =shell:ls *.org= | +| elisp | =elisp:(find-file "Elisp.org")= (Elisp form to evaluate) | +| | =elisp:org-agenda= (interactive Elisp command) | + +#+cindex: VM links +#+cindex: Wanderlust links +On top of these built-in link types, additional ones are available +through the =org-contrib= repository (see [[*Installation]]). For +example, these links to VM or Wanderlust messages are available when +you load the corresponding libraries from the =org-contrib= +repository: + +| =vm:folder= | VM folder link | +| =vm:folder#id= | VM message link | +| =vm://myself@some.where.org/folder#id= | VM on remote machine | +| =vm-imap:account:folder= | VM IMAP folder link | +| =vm-imap:account:folder#id= | VM IMAP message link | +| =wl:folder= | Wanderlust folder link | +| =wl:folder#id= | Wanderlust message link | + +For information on customizing Org to add new link types, see [[*Adding +Hyperlink Types]]. + +A link should be enclosed in double brackets and may contain +descriptive text to be displayed instead of the URL (see [[*Link +Format]]), for example: + +: [[https://www.gnu.org/software/emacs/][GNU Emacs]] + +If the description is a file name or URL that points to an image, HTML +export (see [[*HTML Export]]) inlines the image as a clickable button. If +there is no description at all and the link points to an image, that +image is inlined into the exported HTML file. + +#+cindex: square brackets, around links +#+cindex: angular brackets, around links +#+cindex: plain text external links +Org also recognizes external links amid normal text and activates them +as links. If spaces must be part of the link (for example in +=bbdb:R.*Stallman=), or if you need to remove ambiguities about the +end of the link, enclose the link in square or angular brackets. + +** Handling Links +:PROPERTIES: +:DESCRIPTION: Creating, inserting and following. +:END: +#+cindex: links, handling + +Org provides methods to create a link in the correct syntax, to insert +it into an Org file, and to follow the link. + +#+findex: org-store-link +#+cindex: storing links +The main function is ~org-store-link~, called with {{{kbd(M-x +org-store-link)}}}. Because of its importance, we suggest to bind it +to a widely available key (see [[*Activation]]). It stores a link to the +current location. The link is stored for later insertion into an Org +buffer---see below. The kind of link that is created depends on the +current buffer: + +- /Org mode buffers/ :: + + For Org files, if there is a =<>= at point, the link points + to the target. Otherwise it points to the current headline, which + is also the description[fn:28]. + + #+vindex: org-id-link-to-org-use-id + #+cindex: @samp{CUSTOM_ID}, property + #+cindex: @samp{ID}, property + If the headline has a =CUSTOM_ID= property, store a link to this + custom ID. In addition or alternatively, depending on the value of + ~org-id-link-to-org-use-id~, create and/or use a globally unique + =ID= property for the link[fn:29]. So using this command in Org + buffers potentially creates two links: a human-readable link from + the custom ID, and one that is globally unique and works even if the + entry is moved from file to file. The =ID= property can be either a + UUID (default) or a timestamp, depending on ~org-id-method~. Later, + when inserting the link, you need to decide which one to use. + +- /Email/News clients: VM, Rmail, Wanderlust, MH-E, Gnus/ :: + + #+vindex: org-link-email-description-format + Pretty much all Emacs mail clients are supported. The link points + to the current article, or, in some Gnus buffers, to the group. The + description is constructed according to the variable + ~org-link-email-description-format~. By default, it refers to the + addressee and the subject. + +- /Web browsers: W3, W3M and EWW/ :: + + Here the link is the current URL, with the page title as the + description. + +- /Contacts: BBDB/ :: + + Links created in a BBDB buffer point to the current entry. + +- /Chat: IRC/ :: + + #+vindex: org-irc-links-to-logs + For IRC links, if the variable ~org-irc-link-to-logs~ is non-~nil~, + create a =file= style link to the relevant point in the logs for the + current conversation. Otherwise store an =irc= style link to the + user/channel/server under the point. + +- /Other files/ :: + + For any other file, the link points to the file, with a search + string (see [[*Search Options in File Links]]) pointing to the contents + of the current line. If there is an active region, the selected + words form the basis of the search string. You can write custom Lisp + functions to select the search string and perform the search for + particular file types (see [[*Custom Searches]]). + + You can also define dedicated links to other files. See [[*Adding + Hyperlink Types]]. + +- /Agenda view/ :: + + When point is in an agenda view, the created link points to the + entry referenced by the current line. + +From an Org buffer, the following commands create, navigate or, more +generally, act on links. + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-l)}}} (~org-insert-link~) :: + + #+kindex: C-c C-l + #+findex: org-insert-link + #+cindex: link completion + #+cindex: completion, of links + #+cindex: inserting links + #+vindex: org-link-keep-stored-after-insertion + Insert a link[fn:30]. This prompts for a link to be inserted into + the buffer. You can just type a link, using text for an internal + link, or one of the link type prefixes mentioned in the examples + above. The link is inserted into the buffer, along with + a descriptive text[fn:31]. If some text was selected at this time, + it becomes the default description. + + - /Inserting stored links/ :: + + All links stored during the current session are part of the + history for this prompt, so you can access them with {{{kbd(UP)}}} + and {{{kbd(DOWN)}}} (or {{{kbd(M-p)}}}, {{{kbd(M-n)}}}). + + - /Completion support/ :: + + Completion with {{{kbd(TAB)}}} helps you to insert valid link + prefixes like =http= or =ftp=, including the prefixes defined + through link abbreviations (see [[*Link Abbreviations]]). If you + press {{{kbd(RET)}}} after inserting only the prefix, Org offers + specific completion support for some link types[fn:32]. For + example, if you type {{{kbd(f i l e RET)}}}---alternative access: + {{{kbd(C-u C-c C-l)}}}, see below---Org offers file name + completion, and after {{{kbd(b b d b RET)}}} you can complete + contact names. + +- {{{kbd(C-u C-c C-l)}}} :: + + #+cindex: file name completion + #+cindex: completion, of file names + #+kindex: C-u C-c C-l + When {{{kbd(C-c C-l)}}} is called with a {{{kbd(C-u)}}} prefix + argument, insert a link to a file. You may use file name completion + to select the name of the file. The path to the file is inserted + relative to the directory of the current Org file, if the linked + file is in the current directory or in a sub-directory of it, or if + the path is written relative to the current directory using =../=. + Otherwise an absolute path is used, if possible with =~/= for your + home directory. You can force an absolute path with two + {{{kbd(C-u)}}} prefixes. + +- {{{kbd(C-c C-l)}}} (with point on existing link) :: + + #+cindex: following links + When point is on an existing link, {{{kbd(C-c C-l)}}} allows you to + edit the link and description parts of the link. + +- {{{kbd(C-c C-o)}}} (~org-open-at-point~) :: + + #+kindex: C-c C-o + #+findex: org-open-at-point + #+vindex: org-file-apps + Open link at point. This launches a web browser for URL (using + ~browse-url-at-point~), run VM/MH-E/Wanderlust/Rmail/Gnus/BBDB for + the corresponding links, and execute the command in a shell link. + When point is on an internal link, this command runs the + corresponding search. When point is on the tags part of a headline, + it creates the corresponding tags view (see [[*Matching tags and + properties]]). If point is on a timestamp, it compiles the agenda for + that date. Furthermore, it visits text and remote files in =file= + links with Emacs and select a suitable application for local + non-text files. Classification of files is based on file extension + only. See option ~org-file-apps~. If you want to override the + default application and visit the file with Emacs, use + a {{{kbd(C-u)}}} prefix. If you want to avoid opening in Emacs, use + a {{{kbd(C-u C-u)}}} prefix. + + #+vindex: org-link-frame-setup + If point is on a headline, but not on a link, offer all links in the + headline and entry text. If you want to setup the frame + configuration for following links, customize ~org-link-frame-setup~. + +- {{{kbd(RET)}}} :: + + #+vindex: org-return-follows-link + #+kindex: RET + When ~org-return-follows-link~ is set, {{{kbd(RET)}}} also follows + the link at point. + +- {{{kbd(mouse-2)}}} or {{{kbd(mouse-1)}}} :: + + #+kindex: mouse-2 + #+kindex: mouse-1 + On links, {{{kbd(mouse-1)}}} and {{{kbd(mouse-2)}}} opens the link + just as {{{kbd(C-c C-o)}}} does. + +- {{{kbd(mouse-3)}}} :: + + #+vindex: org-link-use-indirect-buffer-for-internals + #+kindex: mouse-3 + Like {{{kbd(mouse-2)}}}, but force file links to be opened with + Emacs, and internal links to be displayed in another window[fn:33]. + +- {{{kbd(C-c %)}}} (~org-mark-ring-push~) :: + + #+kindex: C-c % + #+findex: org-mark-ring-push + #+cindex: mark ring + Push the current position onto the Org mark ring, to be able to + return easily. Commands following an internal link do this + automatically. + +- {{{kbd(C-c &)}}} (~org-mark-ring-goto~) :: + + #+kindex: C-c & + #+findex: org-mark-ring-goto + #+cindex: links, returning to + Jump back to a recorded position. A position is recorded by the + commands following internal links, and by {{{kbd(C-c %)}}}. Using + this command several times in direct succession moves through a ring + of previously recorded positions. + +- {{{kbd(C-c C-x C-n)}}} (~org-next-link~), {{{kbd(C-c C-x C-p)}}} (~org-previous-link~) :: + + #+kindex: C-c C-x C-p + #+findex: org-previous-link + #+kindex: C-c C-x C-n + #+findex: org-next-link + #+cindex: links, finding next/previous + Move forward/backward to the next link in the buffer. At the limit + of the buffer, the search fails once, and then wraps around. The + key bindings for this are really too long; you might want to bind + this also to {{{kbd(M-n)}}} and {{{kbd(M-p)}}}. + + #+begin_src emacs-lisp + (with-eval-after-load 'org + (define-key org-mode-map (kbd "M-n") #'org-next-link) + (define-key org-mode-map (kbd "M-p") #'org-previous-link)) + #+end_src + +** Using Links Outside Org +:PROPERTIES: +:DESCRIPTION: Linking from my C source code? +:END: + +#+findex: org-insert-link-global +#+findex: org-open-at-point-global +You can insert and follow links that have Org syntax not only in Org, +but in any Emacs buffer. For this, Org provides two functions: +~org-insert-link-global~ and ~org-open-at-point-global~. + +You might want to bind them to globally available keys. See +[[*Activation]] for some advice. + +** Link Abbreviations +:PROPERTIES: +:DESCRIPTION: Shortcuts for writing complex links. +:END: +#+cindex: link abbreviations +#+cindex: abbreviation, links + +Long URL can be cumbersome to type, and often many similar links are +needed in a document. For this you can use link abbreviations. An +abbreviated link looks like this + +: [[linkword:tag][description]] + +#+texinfo: @noindent +#+vindex: org-link-abbrev-alist +where the tag is optional. The /linkword/ must be a word, starting +with a letter, followed by letters, numbers, =-=, and =_=. +Abbreviations are resolved according to the information in the +variable ~org-link-abbrev-alist~ that relates the linkwords to +replacement text. Here is an example: + +#+begin_src emacs-lisp +(setq org-link-abbrev-alist + '(("bugzilla" . "http://10.1.2.9/bugzilla/show_bug.cgi?id=") + ("Nu Html Checker" . "https://validator.w3.org/nu/?doc=%h") + ("duckduckgo" . "https://duckduckgo.com/?q=%s") + ("omap" . "http://nominatim.openstreetmap.org/search?q=%s&polygon=1") + ("ads" . "https://ui.adsabs.harvard.edu/search/q=%20author%3A\"%s\""))) +#+end_src + +If the replacement text contains the string =%s=, it is replaced with +the tag. Using =%h= instead of =%s= percent-encodes the tag (see the +example above, where we need to encode the URL parameter). Using +=%(my-function)= passes the tag to a custom Lisp function, and replace +it by the resulting string. + +If the replacement text do not contain any specifier, it is simply +appended to the string in order to create the link. + +Instead of a string, you may also specify a Lisp function to create +the link. Such a function will be called with the tag as the only +argument. + +With the above setting, you could link to a specific bug with +=[[bugzilla:129]]=, search the web for =OrgMode= with =[[duckduckgo:OrgMode]]=, +show the map location of the Free Software Foundation =[[gmap:51 +Franklin Street, Boston]]= or of Carsten office =[[omap:Science Park 904, +Amsterdam, The Netherlands]]= and find out what the Org author is doing +besides Emacs hacking with =[[ads:Dominik,C]]=. + +If you need special abbreviations just for a single Org buffer, you +can define them in the file with + +#+cindex: @samp{LINK}, keyword +#+begin_example +,#+LINK: bugzilla http://10.1.2.9/bugzilla/show_bug.cgi?id= +,#+LINK: duckduckgo https://duckduckgo.com/?q=%s +#+end_example + +In-buffer completion (see [[*Completion]]) can be used after =[= to +complete link abbreviations. You may also define a Lisp function that +implements special (e.g., completion) support for inserting such a +link with {{{kbd(C-c C-l)}}}. Such a function should not accept any +arguments, and should return the full link with a prefix. You can set +the link completion function like this: + +#+begin_src emacs-lisp +(org-link-set-parameter "type" :complete #'some-completion-function) +#+end_src + +** Search Options in File Links +:PROPERTIES: +:DESCRIPTION: Linking to a specific location. +:ALT_TITLE: Search Options +:END: +#+cindex: search option in file links +#+cindex: file links, searching +#+cindex: attachment links, searching + +File links can contain additional information to make Emacs jump to a +particular location in the file when following a link. This can be a +line number or a search option after a double colon[fn:34]. For +example, when the command ~org-store-link~ creates a link (see +[[*Handling Links]]) to a file, it encodes the words in the current line +as a search string that can be used to find this line back later when +following the link with {{{kbd(C-c C-o)}}}. + +Note that all search options apply for Attachment links in the same +way that they apply for File links. + +Here is the syntax of the different ways to attach a search to a file +link, together with explanations for each: + +#+begin_example +[[file:~/code/main.c::255]] +[[file:~/xx.org::My Target]] +[[file:~/xx.org::*My Target]] +[[file:~/xx.org::#my-custom-id]] +[[file:~/xx.org::/regexp/]] +[[attachment:main.c::255]] +#+end_example + +- =255= :: + + Jump to line 255. + +- =My Target= :: + + Search for a link target =<>=, or do a text search for + =my target=, similar to the search in internal links, see [[*Internal + Links]]. In HTML export (see [[*HTML Export]]), such a file link becomes + a HTML reference to the corresponding named anchor in the linked + file. + +- =*My Target= :: + + In an Org file, restrict search to headlines. + +- =#my-custom-id= :: + + Link to a heading with a =CUSTOM_ID= property + +- =/REGEXP/= :: + + Do a regular expression search for {{{var(REGEXP)}}} (see [[*Regular + Expressions]]). This uses the Emacs command ~occur~ to list all + matches in a separate window. If the target file is in Org mode, + ~org-occur~ is used to create a sparse tree with the matches. + +As a degenerate case, a file link with an empty file name can be used +to search the current file. For example, =[[file:::find me]]= does +a search for =find me= in the current file, just as =[[find me]]= +would. + +** Custom Searches +:PROPERTIES: +:DESCRIPTION: When the default search is not enough. +:END: +#+cindex: custom search strings +#+cindex: search strings, custom + +The default mechanism for creating search strings and for doing the +actual search related to a file link may not work correctly in all +cases. For example, BibTeX database files have many entries like +~year="1993"~ which would not result in good search strings, because +the only unique identification for a BibTeX entry is the citation key. + +#+vindex: org-create-file-search-functions +#+vindex: org-execute-file-search-functions +If you come across such a problem, you can write custom functions to +set the right search string for a particular file type, and to do the +search for the string in the file. Using ~add-hook~, these functions +need to be added to the hook variables +~org-create-file-search-functions~ and +~org-execute-file-search-functions~. See the docstring for these +variables for more information. Org actually uses this mechanism for +BibTeX database files, and you can use the corresponding code as an +implementation example. See the file =ol-bibtex.el=. + +* TODO Items +:PROPERTIES: +:DESCRIPTION: Every tree branch can be a TODO item. +:END: +#+cindex: TODO items + +Org mode does not maintain TODO lists as separate documents[fn:35]. +Instead, TODO items are an integral part of the notes file, because +TODO items usually come up while taking notes! With Org mode, simply +mark any entry in a tree as being a TODO item. In this way, +information is not duplicated, and the entire context from which the +TODO item emerged is always present. + +Of course, this technique for managing TODO items scatters them +throughout your notes file. Org mode compensates for this by +providing methods to give you an overview of all the things that you +have to do. + +** Basic TODO Functionality +:PROPERTIES: +:DESCRIPTION: Marking and displaying TODO entries. +:ALT_TITLE: TODO Basics +:END: + +Any headline becomes a TODO item when it starts with the word =TODO=, +for example: + +: *** TODO Write letter to Sam Fortune + +The most important commands to work with TODO entries are: + +- {{{kbd(C-c C-t)}}} (~org-todo~) :: + + #+kindex: C-c C-t + #+cindex: cycling, of TODO states + Rotate the TODO state of the current item among + + #+begin_example + ,-> (unmarked) -> TODO -> DONE --. + '--------------------------------' + #+end_example + + If TODO keywords have fast access keys (see [[*Fast access to TODO + states]]), prompt for a TODO keyword through the fast selection + interface; this is the default behavior when + ~org-use-fast-todo-selection~ is non-~nil~. + + The same state changing can also be done "remotely" from the agenda + buffer with the {{{kbd(t)}}} command key (see [[*Commands in the + Agenda Buffer]]). + +- {{{kbd(S-RIGHT)}}} {{{kbd(S-LEFT)}}} :: + + #+kindex: S-RIGHT + #+kindex: S-LEFT + #+vindex: org-treat-S-cursor-todo-selection-as-state-change + Select the following/preceding TODO state, similar to cycling. + Useful mostly if more than two TODO states are possible (see + [[*Extended Use of TODO Keywords]]). See also [[*Packages that conflict + with Org mode]], for a discussion of the interaction with + shift-selection. See also the variable + ~org-treat-S-cursor-todo-selection-as-state-change~. + +- {{{kbd(C-c / t)}}} (~org-show-todo-tree~) :: + + #+kindex: C-c / t + #+cindex: sparse tree, for TODO + #+vindex: org-todo-keywords + #+findex: org-show-todo-tree + View TODO items in a /sparse tree/ (see [[*Sparse Trees]]). Folds the + entire buffer, but shows all TODO items---with not-DONE state---and + the headings hierarchy above them. With a prefix argument, or by + using {{{kbd(C-c / T)}}}, search for a specific TODO. You are + prompted for the keyword, and you can also give a list of keywords + like =KWD1|KWD2|...= to list entries that match any one of these + keywords. With a numeric prefix argument N, show the tree for the + Nth keyword in the variable ~org-todo-keywords~. With two prefix + arguments, find all TODO states, both un-done and done. + +- {{{kbd(M-x org-agenda t)}}} (~org-todo-list~) :: + + #+kindex: t @r{(Agenda dispatcher)} + Show the global TODO list. Collects the TODO items (with not-DONE + states) from all agenda files (see [[*Agenda Views]]) into a single + buffer. The new buffer is in Org Agenda mode, which provides + commands to examine and manipulate the TODO entries from the new + buffer (see [[*Commands in the Agenda Buffer]]). See [[*The global TODO + list]], for more information. + +- {{{kbd(S-M-RET)}}} (~org-insert-todo-heading~) :: + + #+kindex: S-M-RET + #+findex: org-insert-todo-heading + Insert a new TODO entry below the current one. + +#+vindex: org-todo-state-tags-triggers +Changing a TODO state can also trigger tag changes. See the docstring +of the option ~org-todo-state-tags-triggers~ for details. + +** Extended Use of TODO Keywords +:PROPERTIES: +:DESCRIPTION: Workflow and assignments. +:ALT_TITLE: TODO Extensions +:END: +#+cindex: extended TODO keywords + +#+vindex: org-todo-keywords +By default, marked TODO entries have one of only two states: TODO and +DONE. Org mode allows you to classify TODO items in more complex ways +with /TODO keywords/ (stored in ~org-todo-keywords~). With special +setup, the TODO keyword system can work differently in different +files. + +Note that /tags/ are another way to classify headlines in general and +TODO items in particular (see [[*Tags]]). + +*** TODO keywords as workflow states +:PROPERTIES: +:DESCRIPTION: From TODO to DONE in steps. +:ALT_TITLE: Workflow states +:END: +#+cindex: TODO workflow +#+cindex: workflow states as TODO keywords + +You can use TODO keywords to indicate different, possibly /sequential/ +states in the process of working on an item, for example[fn:36]: + +#+begin_src emacs-lisp +(setq org-todo-keywords + '((sequence "TODO" "FEEDBACK" "VERIFY" "|" "DONE" "DELEGATED"))) +#+end_src + +The vertical bar separates the TODO keywords (states that /need +action/) from the DONE states (which need /no further action/). If +you do not provide the separator bar, the last state is used as the +DONE state. + +#+cindex: completion, of TODO keywords +With this setup, the command {{{kbd(C-c C-t)}}} cycles an entry from +=TODO= to =FEEDBACK=, then to =VERIFY=, and finally to =DONE= and +=DELEGATED=. You may also use a numeric prefix argument to quickly +select a specific state. For example {{{kbd(C-3 C-c C-t)}}} changes +the state immediately to =VERIFY=. Or you can use {{{kbd(S-RIGHT)}}} +and {{{kbd(S-LEFT)}}} to go forward and backward through the states. +If you define many keywords, you can use in-buffer completion (see +[[*Completion]]) or a special one-key selection scheme (see [[*Fast +access to TODO states]]) to insert these words into the buffer. +Changing a TODO state can be logged with a timestamp, see [[*Tracking +TODO state changes]], for more information. + +*** TODO keywords as types +:PROPERTIES: +:DESCRIPTION: I do this, Fred does the rest. +:ALT_TITLE: TODO types +:END: +#+cindex: TODO types +#+cindex: names as TODO keywords +#+cindex: types as TODO keywords + +The second possibility is to use TODO keywords to indicate different +/types/ of action items. For example, you might want to indicate that +items are for "work" or "home". Or, when you work with several people +on a single project, you might want to assign action items directly to +persons, by using their names as TODO keywords. This type of +functionality is actually much better served by using tags (see +[[*Tags]]), so the TODO implementation is kept just for backward +compatibility. + +Using TODO types, it would be set up like this: + +#+begin_src emacs-lisp +(setq org-todo-keywords '((type "Fred" "Sara" "Lucy" "|" "DONE"))) +#+end_src + +In this case, different keywords do not indicate states, but +rather different types. So the normal work flow would be to assign +a task to a person, and later to mark it DONE. Org mode supports this +style by adapting the workings of the command {{{kbd(C-c +C-t)}}}[fn:37]. When used several times in succession, it still +cycles through all names, in order to first select the right type for +a task. But when you return to the item after some time and execute +{{{kbd(C-c C-t)}}} again, it will switch from any name directly to +=DONE=. Use prefix arguments or completion to quickly select +a specific name. You can also review the items of a specific TODO +type in a sparse tree by using a numeric prefix to {{{kbd(C-c / t)}}}. +For example, to see all things Lucy has to do, you would use +{{{kbd(C-3 C-c / t)}}}. To collect Lucy's items from all agenda files +into a single buffer, you would use the numeric prefix argument as +well when creating the global TODO list: {{{kbd(C-3 M-x org-agenda +t)}}}. + +*** Multiple keyword sets in one file +:PROPERTIES: +:DESCRIPTION: Mixing it all, still finding your way. +:ALT_TITLE: Multiple sets in one file +:END: +#+cindex: TODO keyword sets + +Sometimes you may want to use different sets of TODO keywords in +parallel. For example, you may want to have the basic TODO/DONE, but +also a workflow for bug fixing, and a separate state indicating that +an item has been canceled---so it is not DONE, but also does not +require action. Your setup would then look like this: + +#+begin_src emacs-lisp +(setq org-todo-keywords + '((sequence "TODO" "|" "DONE") + (sequence "REPORT" "BUG" "KNOWNCAUSE" "|" "FIXED") + (sequence "|" "CANCELED"))) +#+end_src + +The keywords should all be different, this helps Org mode keep track +of which subsequence should be used for a given entry. In this setup, +{{{kbd(C-c C-t)}}} only operates within a sub-sequence, so it switches +from =DONE= to (nothing) to =TODO=, and from =FIXED= to (nothing) to +=REPORT=. Therefore you need a mechanism to initially select the +correct sequence. In addition to typing a keyword or using completion +(see [[*Completion]]), you may also apply the following commands: + +#+attr_texinfo: :sep , +- {{{kbd(C-u C-u C-c C-t)}}}, {{{kbd(C-S-RIGHT)}}}, {{{kbd(C-S-LEFT)}}} :: + + #+kindex: C-S-RIGHT + #+kindex: C-S-LEFT + #+kindex: C-u C-u C-c C-t + These keys jump from one TODO sub-sequence to the next. In the + above example, {{{kbd(C-u C-u C-c C-t)}}} or {{{kbd(C-S-RIGHT)}}} + would jump from =TODO= or =DONE= to =REPORT=, and any of the words + in the second row to =CANCELED=. Note that the {{{kbd(C-S-)}}} key + binding conflict with shift-selection (see [[*Packages that conflict + with Org mode]]). + +- {{{kbd(S-RIGHT)}}}, {{{kbd(S-LEFT)}}} :: + + #+kindex: S-RIGHT + #+kindex: S-LEFT + {{{kbd(S-LEFT)}}} and {{{kbd(S-RIGHT)}}} walk through /all/ keywords + from all sub-sequences, so for example {{{kbd(S-RIGHT)}}} would + switch from =DONE= to =REPORT= in the example above. For + a discussion of the interaction with shift-selection, see [[*Packages + that conflict with Org mode]]. + +*** Fast access to TODO states +:PROPERTIES: +:DESCRIPTION: Single letter selection of state. +:END: + +If you would like to quickly change an entry to an arbitrary TODO +state instead of cycling through the states, you can set up keys for +single-letter access to the states. This is done by adding the +selection character after each keyword, in parentheses[fn:38]. For +example: + +#+begin_src emacs-lisp +(setq org-todo-keywords + '((sequence "TODO(t)" "|" "DONE(d)") + (sequence "REPORT(r)" "BUG(b)" "KNOWNCAUSE(k)" "|" "FIXED(f)") + (sequence "|" "CANCELED(c)"))) +#+end_src + +#+vindex: org-fast-tag-selection-include-todo +If you then press {{{kbd(C-c C-t)}}} followed by the selection key, +the entry is switched to this state. {{{kbd(SPC)}}} can be used to +remove any TODO keyword from an entry[fn:39]. + +*** Setting up keywords for individual files +:PROPERTIES: +:DESCRIPTION: Different files, different requirements. +:ALT_TITLE: Per-file keywords +:END: +#+cindex: keyword options +#+cindex: per-file keywords +#+cindex: @samp{TODO}, keyword +#+cindex: @samp{TYP_TODO}, keyword +#+cindex: @samp{SEQ_TODO}, keyword + +It can be very useful to use different aspects of the TODO mechanism +in different files. For file-local settings, you need to add special +lines to the file which set the keywords and interpretation for that +file only. For example, to set one of the two examples discussed +above, you need one of the following lines, starting in column zero +anywhere in the file: + +: #+TODO: TODO FEEDBACK VERIFY | DONE CANCELED + +You may also write =#+SEQ_TODO= to be explicit about the +interpretation, but it means the same as =#+TODO=, or + +: #+TYP_TODO: Fred Sara Lucy Mike | DONE + +A setup for using several sets in parallel would be: + +#+begin_example +,#+TODO: TODO(t) | DONE(d) +,#+TODO: REPORT(r) BUG(b) KNOWNCAUSE(k) | FIXED(f) +,#+TODO: | CANCELED(c) +#+end_example + +#+cindex: completion, of option keywords +#+kindex: M-TAB +To make sure you are using the correct keyword, type =#+= into the +buffer and then use {{{kbd(M-TAB)}}} to complete it (see [[*Completion]]). + +#+cindex: DONE, final TODO keyword +Remember that the keywords after the vertical bar---or the last +keyword if no bar is there---must always mean that the item is DONE, +although you may use a different word. After changing one of these +lines, use {{{kbd(C-c C-c)}}} with point still in the line to make the +changes known to Org mode[fn:40]. + +*** Faces for TODO keywords +:PROPERTIES: +:DESCRIPTION: Highlighting states. +:END: +#+cindex: faces, for TODO keywords + +#+vindex: org-todo, face +#+vindex: org-done, face +#+vindex: org-todo-keyword-faces +Org mode highlights TODO keywords with special faces: ~org-todo~ for +keywords indicating that an item still has to be acted upon, and +~org-done~ for keywords indicating that an item is finished. If you +are using more than two different states, you might want to use +special faces for some of them. This can be done using the variable +~org-todo-keyword-faces~. For example: + +#+begin_src emacs-lisp +(setq org-todo-keyword-faces + '(("TODO" . org-warning) ("STARTED" . "yellow") + ("CANCELED" . (:foreground "blue" :weight bold)))) +#+end_src + +#+vindex: org-faces-easy-properties +While using a list with face properties as shown for =CANCELED= +/should/ work, this does not always seem to be the case. If +necessary, define a special face and use that. A string is +interpreted as a color. The variable ~org-faces-easy-properties~ +determines if that color is interpreted as a foreground or +a background color. + +*** TODO dependencies +:PROPERTIES: +:DESCRIPTION: When one task needs to wait for others. +:END: +#+cindex: TODO dependencies +#+cindex: dependencies, of TODO states + +#+vindex: org-enforce-todo-dependencies +#+cindex: @samp{ORDERED}, property +The structure of Org files---hierarchy and lists---makes it easy to +define TODO dependencies. Usually, a parent TODO task should not be +marked as done until all TODO subtasks, or children tasks, are marked +as done. Sometimes there is a logical sequence to (sub)tasks, so that +one subtask cannot be acted upon before all siblings above it have +been marked as done. If you customize the variable +~org-enforce-todo-dependencies~, Org blocks entries from changing +state to DONE while they have TODO children that are not DONE. +Furthermore, if an entry has a property =ORDERED=, each of its TODO +children is blocked until all earlier siblings are marked as done. +Here is an example: + +#+begin_example +,* TODO Blocked until (two) is done +,** DONE one +,** TODO two + +,* Parent +:PROPERTIES: +:ORDERED: t +:END: +,** TODO a +,** TODO b, needs to wait for (a) +,** TODO c, needs to wait for (a) and (b) +#+end_example + +#+cindex: TODO dependencies, @samp{NOBLOCKING} +#+cindex: @samp{NOBLOCKING}, property +You can ensure an entry is never blocked by using the =NOBLOCKING= +property (see [[*Properties and Columns]]): + +#+begin_example +,* This entry is never blocked +:PROPERTIES: +:NOBLOCKING: t +:END: +#+end_example + +- {{{kbd(C-c C-x o)}}} (~org-toggle-ordered-property~) :: + + #+kindex: C-c C-x o + #+findex: org-toggle-ordered-property + #+vindex: org-track-ordered-property-with-tag + Toggle the =ORDERED= property of the current entry. A property is + used for this behavior because this should be local to the current + entry, not inherited from entries above like a tag (see [[*Tags]]). + However, if you would like to /track/ the value of this property + with a tag for better visibility, customize the variable + ~org-track-ordered-property-with-tag~. + +- {{{kbd(C-u C-u C-u C-c C-t)}}} :: + + #+kindex: C-u C-u C-u C-u C-c C-t + Change TODO state, regardless of any state blocking. + +#+vindex: org-agenda-dim-blocked-tasks +If you set the variable ~org-agenda-dim-blocked-tasks~, TODO entries +that cannot be marked as done because of unmarked children are shown +in a dimmed font or even made invisible in agenda views (see [[*Agenda +Views]]). + +#+cindex: checkboxes and TODO dependencies +#+vindex: org-enforce-todo-dependencies +You can also block changes of TODO states by using checkboxes (see +[[*Checkboxes]]). If you set the variable +~org-enforce-todo-checkbox-dependencies~, an entry that has unchecked +checkboxes is blocked from switching to DONE. + +If you need more complex dependency structures, for example +dependencies between entries in different trees or files, check out +the module =org-depend.el= in the =org-contrib= repository. + +** Progress Logging +:PROPERTIES: +:DESCRIPTION: Dates and notes for progress. +:END: +#+cindex: progress logging +#+cindex: logging, of progress + +To record a timestamp and a note when changing a TODO state, call the +command ~org-todo~ with a prefix argument. + +- {{{kbd(C-u C-c C-t)}}} (~org-todo~) :: + + #+kindex: C-u C-c C-t + Prompt for a note and record a the time of the TODO state change. + The note is inserted as a list item below the headline, but can also + be placed into a drawer, see [[*Tracking TODO state changes]]. + +If you want to be more systematic, Org mode can automatically record a +timestamp and optionally a note when you mark a TODO item as DONE, or +even each time you change the state of a TODO item. This system is +highly configurable, settings can be on a per-keyword basis and can be +localized to a file or even a subtree. For information on how to +clock working time for a task, see [[*Clocking Work Time]]. + +*** Closing items +:PROPERTIES: +:DESCRIPTION: When was this entry marked as done? +:END: + +The most basic automatic logging is to keep track of /when/ a certain +TODO item was marked as done. This can be achieved with[fn:41] + +#+begin_src emacs-lisp +(setq org-log-done 'time) +#+end_src + +#+vindex: org-closed-keep-when-no-todo +#+texinfo: @noindent +Then each time you turn an entry from a TODO (not-done) state into any +of the DONE states, a line =CLOSED: [timestamp]= is inserted just +after the headline. If you turn the entry back into a TODO item +through further state cycling, that line is removed again. If you +turn the entry back to a non-TODO state (by pressing {{{kbd(C-c C-t +SPC)}}} for example), that line is also removed, unless you set +~org-closed-keep-when-no-todo~ to non-~nil~. If you want to record +a note along with the timestamp, use[fn:42] + +#+begin_src emacs-lisp +(setq org-log-done 'note) +#+end_src + +#+texinfo: @noindent +You are then prompted for a note, and that note is stored below the +entry with a =Closing Note= heading. + +*** Tracking TODO state changes +:PROPERTIES: +:DESCRIPTION: When did the status change? +:END: +#+cindex: drawer, for state change recording + +#+vindex: org-log-states-order-reversed +#+vindex: org-log-into-drawer +#+cindex: @samp{LOG_INTO_DRAWER}, property +You might want to automatically keep track of when a state change +occurred and maybe take a note about this change. You can either +record just a timestamp, or a time-stamped note. These records are +inserted after the headline as an itemized list, newest first[fn:43]. +When taking a lot of notes, you might want to get the notes out of the +way into a drawer (see [[*Drawers]]). Customize the variable +~org-log-into-drawer~ to get this behavior---the recommended drawer +for this is called =LOGBOOK=[fn:44]. You can also overrule the +setting of this variable for a subtree by setting a =LOG_INTO_DRAWER= +property. + +Since it is normally too much to record a note for every state, Org +mode expects configuration on a per-keyword basis for this. This is +achieved by adding special markers =!= (for a timestamp) or =@= (for +a note with timestamp) in parentheses after each keyword. For +example, with the setting + +#+begin_src emacs-lisp +(setq org-todo-keywords + '((sequence "TODO(t)" "WAIT(w@/!)" "|" "DONE(d!)" "CANCELED(c@)"))) +#+end_src + +#+vindex: org-log-done +You not only define global TODO keywords and fast access keys, but +also request that a time is recorded when the entry is set to =DONE=, +and that a note is recorded when switching to =WAIT= or +=CANCELED=[fn:45]. The setting for =WAIT= is even more special: the +=!= after the slash means that in addition to the note taken when +entering the state, a timestamp should be recorded when /leaving/ the +=WAIT= state, if and only if the /target/ state does not configure +logging for entering it. So it has no effect when switching from +=WAIT= to =DONE=, because =DONE= is configured to record a timestamp +only. But when switching from =WAIT= back to =TODO=, the =/!= in the +=WAIT= setting now triggers a timestamp even though =TODO= has no +logging configured. + +You can use the exact same syntax for setting logging preferences local +to a buffer: + +: #+TODO: TODO(t) WAIT(w@/!) | DONE(d!) CANCELED(c@) + +To record a timestamp without a note for TODO keywords configured with +=@=, just type {{{kbd(C-c C-c)}}} to enter a blank note when prompted. + +#+cindex: @samp{LOGGING}, property +In order to define logging settings that are local to a subtree or +a single item, define a =LOGGING= property in this entry. Any +non-empty =LOGGING= property resets all logging settings to ~nil~. +You may then turn on logging for this specific tree using =STARTUP= +keywords like =lognotedone= or =logrepeat=, as well as adding state +specific settings like =TODO(!)=. For example: + +#+begin_example +,* TODO Log each state with only a time + :PROPERTIES: + :LOGGING: TODO(!) WAIT(!) DONE(!) CANCELED(!) + :END: +,* TODO Only log when switching to WAIT, and when repeating + :PROPERTIES: + :LOGGING: WAIT(@) logrepeat + :END: +,* TODO No logging at all + :PROPERTIES: + :LOGGING: nil + :END: +#+end_example + +*** Tracking your habits +:PROPERTIES: +:DESCRIPTION: How consistent have you been? +:END: +#+cindex: habits +#+cindex: @samp{STYLE}, property + +Org has the ability to track the consistency of a special category of +TODO, called "habits." To use habits, you have to enable the ~habits~ +module by customizing the variable ~org-modules~. + +A habit has the following properties: + +1. The habit is a TODO item, with a TODO keyword representing an open + state. + +2. The property =STYLE= is set to the value =habit= (see [[*Properties + and Columns]]). + +3. The TODO has a scheduled date, usually with a =.+= style repeat + interval. A =++= style may be appropriate for habits with time + constraints, e.g., must be done on weekends, or a =+= style for an + unusual habit that can have a backlog, e.g., weekly reports. + +4. The TODO may also have minimum and maximum ranges specified by + using the syntax =.+2d/3d=, which says that you want to do the task + at least every three days, but at most every two days. + +5. State logging for the DONE state is enabled (see [[*Tracking TODO + state changes]]), in order for historical data to be represented in + the consistency graph. If it is not enabled it is not an error, + but the consistency graphs are largely meaningless. + +To give you an idea of what the above rules look like in action, here's an +actual habit with some history: + +#+begin_example +,** TODO Shave + SCHEDULED: <2009-10-17 Sat .+2d/4d> + :PROPERTIES: + :STYLE: habit + :LAST_REPEAT: [2009-10-19 Mon 00:36] + :END: + - State "DONE" from "TODO" [2009-10-15 Thu] + - State "DONE" from "TODO" [2009-10-12 Mon] + - State "DONE" from "TODO" [2009-10-10 Sat] + - State "DONE" from "TODO" [2009-10-04 Sun] + - State "DONE" from "TODO" [2009-10-02 Fri] + - State "DONE" from "TODO" [2009-09-29 Tue] + - State "DONE" from "TODO" [2009-09-25 Fri] + - State "DONE" from "TODO" [2009-09-19 Sat] + - State "DONE" from "TODO" [2009-09-16 Wed] + - State "DONE" from "TODO" [2009-09-12 Sat] +#+end_example + +What this habit says is: I want to shave at most every 2 days---given +by the =SCHEDULED= date and repeat interval---and at least every +4 days. If today is the 15th, then the habit first appears in the +agenda (see [[*Agenda Views]]) on Oct 17, after the minimum of 2 days has +elapsed, and will appear overdue on Oct 19, after four days have +elapsed. + +What's really useful about habits is that they are displayed along +with a consistency graph, to show how consistent you've been at +getting that task done in the past. This graph shows every day that +the task was done over the past three weeks, with colors for each day. +The colors used are: + +- Blue :: If the task was not to be done yet on that day. +- Green :: If the task could have been done on that day. +- Yellow :: If the task was going to be overdue the next day. +- Red :: If the task was overdue on that day. + +In addition to coloring each day, the day is also marked with an +asterisk if the task was actually done that day, and an exclamation +mark to show where the current day falls in the graph. + +There are several configuration variables that can be used to change +the way habits are displayed in the agenda. + +- ~org-habit-graph-column~ :: + + #+vindex: org-habit-graph-column + The buffer column at which the consistency graph should be drawn. + This overwrites any text in that column, so it is a good idea to + keep your habits' titles brief and to the point. + +- ~org-habit-preceding-days~ :: + + #+vindex: org-habit-preceding-days + The amount of history, in days before today, to appear in + consistency graphs. + +- ~org-habit-following-days~ :: + + #+vindex: org-habit-following-days + The number of days after today that appear in consistency graphs. + +- ~org-habit-show-habits-only-for-today~ :: + + #+vindex: org-habit-show-habits-only-for-today + If non-~nil~, only show habits in today's agenda view. The default + value is ~t~. Pressing {{{kbd(C-u K)}}} in the agenda toggles this + variable. + +Lastly, pressing {{{kbd(K)}}} in the agenda buffer causes habits to +temporarily be disabled and do not appear at all. Press {{{kbd(K)}}} +again to bring them back. They are also subject to tag filtering, if +you have habits which should only be done in certain contexts, for +example. + +** Priorities +:PROPERTIES: +:DESCRIPTION: Some things are more important than others. +:END: +#+cindex: priorities +#+cindex: priority cookie + +If you use Org mode extensively, you may end up with enough TODO items +that it starts to make sense to prioritize them. Prioritizing can be +done by placing a /priority cookie/ into the headline of a TODO item +right after the TODO keyword, like this: + +: *** TODO [#A] Write letter to Sam Fortune + +#+vindex: org-priority-faces +By default, Org mode supports three priorities: =A=, =B=, and =C=. +=A= is the highest priority. An entry without a cookie is treated as +equivalent if it had priority =B=. Priorities make a difference only +for sorting in the agenda (see [[*Weekly/daily agenda]]). Outside the +agenda, they have no inherent meaning to Org mode. The cookies are +displayed with the face defined by the variable ~org-priority-faces~, +which can be customized. + +You can also use numeric values for priorities, such as + +: *** TODO [#1] Write letter to Sam Fortune + +When using numeric priorities, you need to set ~org-priority-highest~, +~org-priority-lowest~ and ~org-priority-default~ to integers, which +must all be strictly inferior to 65. + +Priorities can be attached to any outline node; they do not need to be +TODO items. + +#+attr_texinfo: :sep ; +- {{{kbd(C-c \,)}}} (~org-priority~) :: + + #+kindex: C-c , + #+findex: org-priority + Set the priority of the current headline. The command prompts for + a priority character =A=, =B= or =C=. When you press {{{kbd(SPC)}}} + instead, the priority cookie, if one is set, is removed from the + headline. The priorities can also be changed "remotely" from the + agenda buffer with the {{{kbd(\,)}}} command (see [[*Commands in the + Agenda Buffer]]). + +- {{{kbd(S-UP)}}} (~org-priority-up~); {{{kbd(S-DOWN)}}} (~org-priority-down~) :: + + #+kindex: S-UP + #+kindex: S-DOWN + #+findex: org-priority-up + #+findex: org-priority-down + #+vindex: org-priority-start-cycle-with-default + Increase/decrease the priority of the current headline[fn:46]. Note + that these keys are also used to modify timestamps (see [[*Creating + Timestamps]]). See also [[*Packages that conflict with Org mode]], for + a discussion of the interaction with shift-selection. + +#+vindex: org-priority-highest +#+vindex: org-priority-lowest +#+vindex: org-priority-default +You can change the range of allowed priorities by setting the +variables ~org-priority-highest~, ~org-priority-lowest~, and +~org-priority-default~. For an individual buffer, you may set these +values (highest, lowest, default) like this (please make sure that the +highest priority is earlier in the alphabet than the lowest priority): + +#+cindex: @samp{PRIORITIES}, keyword +: #+PRIORITIES: A C B + +Or, using numeric values: + +: #+PRIORITIES: 1 10 5 + +** Breaking Down Tasks into Subtasks +:PROPERTIES: +:DESCRIPTION: Splitting a task into manageable pieces. +:ALT_TITLE: Breaking Down Tasks +:END: +#+cindex: tasks, breaking down +#+cindex: statistics, for TODO items + +#+vindex: org-agenda-todo-list-sublevels +It is often advisable to break down large tasks into smaller, +manageable subtasks. You can do this by creating an outline tree +below a TODO item, with detailed subtasks on the tree[fn:47]. To keep +an overview of the fraction of subtasks that have already been marked +as done, insert either =[/]= or =[%]= anywhere in the headline. These +cookies are updated each time the TODO status of a child changes, or +when pressing {{{kbd(C-c C-c)}}} on the cookie. For example: + +#+begin_example +,* Organize Party [33%] +,** TODO Call people [1/2] +,*** TODO Peter +,*** DONE Sarah +,** TODO Buy food +,** DONE Talk to neighbor +#+end_example + +#+cindex: @samp{COOKIE_DATA}, property +If a heading has both checkboxes and TODO children below it, the +meaning of the statistics cookie become ambiguous. Set the property +=COOKIE_DATA= to either =checkbox= or =todo= to resolve this issue. + +#+vindex: org-hierarchical-todo-statistics +If you would like to have the statistics cookie count any TODO entries +in the subtree (not just direct children), configure the variable +~org-hierarchical-todo-statistics~. To do this for a single subtree, +include the word =recursive= into the value of the =COOKIE_DATA= +property. + +#+begin_example org +,* Parent capturing statistics [2/20] + :PROPERTIES: + :COOKIE_DATA: todo recursive + :END: +#+end_example + +If you would like a TODO entry to automatically change to DONE when +all children are done, you can use the following setup: + +#+begin_src emacs-lisp +(defun org-summary-todo (n-done n-not-done) + "Switch entry to DONE when all subentries are done, to TODO otherwise." + (let (org-log-done org-log-states) ; turn off logging + (org-todo (if (= n-not-done 0) "DONE" "TODO")))) + +(add-hook 'org-after-todo-statistics-hook #'org-summary-todo) +#+end_src + +Another possibility is the use of checkboxes to identify (a hierarchy +of) a large number of subtasks (see [[*Checkboxes]]). + +** Checkboxes +:PROPERTIES: +:DESCRIPTION: Tick-off lists. +:END: +#+cindex: checkboxes + +#+vindex: org-list-automatic-rules +Every item in a plain list[fn:48] (see [[*Plain Lists]]) can be made into +a checkbox by starting it with the string =[ ]=. This feature is +similar to TODO items (see [[*TODO Items]]), but is more lightweight. +Checkboxes are not included into the global TODO list, so they are +often great to split a task into a number of simple steps. Or you can +use them in a shopping list. + +Here is an example of a checkbox list. + +#+begin_example +,* TODO Organize party [2/4] + - [-] call people [1/3] + - [ ] Peter + - [X] Sarah + - [ ] Sam + - [X] order food + - [ ] think about what music to play + - [X] talk to the neighbors +#+end_example + +Checkboxes work hierarchically, so if a checkbox item has children +that are checkboxes, toggling one of the children checkboxes makes the +parent checkbox reflect if none, some, or all of the children are +checked. + +#+cindex: statistics, for checkboxes +#+cindex: checkbox statistics +#+cindex: @samp{COOKIE_DATA}, property +#+vindex: org-hierarchical-checkbox-statistics +The =[2/4]= and =[1/3]= in the first and second line are cookies +indicating how many checkboxes present in this entry have been checked +off, and the total number of checkboxes present. This can give you an +idea on how many checkboxes remain, even without opening a folded +entry. The cookies can be placed into a headline or into (the first +line of) a plain list item. Each cookie covers checkboxes of direct +children structurally below the headline/item on which the cookie +appears[fn:49]. You have to insert the cookie yourself by typing +either =[/]= or =[%]=. With =[/]= you get an =n out of m= result, as +in the examples above. With =[%]= you get information about the +percentage of checkboxes checked (in the above example, this would be +=[50%]= and =[33%]=, respectively). In a headline, a cookie can count +either checkboxes below the heading or TODO states of children, and it +displays whatever was changed last. Set the property =COOKIE_DATA= to +either =checkbox= or =todo= to resolve this issue. + +#+cindex: blocking, of checkboxes +#+cindex: checkbox blocking +#+cindex: @samp{ORDERED}, property +If the current outline node has an =ORDERED= property, checkboxes must +be checked off in sequence, and an error is thrown if you try to check +off a box while there are unchecked boxes above it. + +The following commands work with checkboxes: + +- {{{kbd(C-c C-c)}}} (~org-toggle-checkbox~) :: + + #+kindex: C-c C-c + #+findex: org-toggle-checkbox + Toggle checkbox status or---with prefix argument---checkbox presence + at point. With a single prefix argument, add an empty checkbox or + remove the current one[fn:50]. With a double prefix argument, set + it to =[-]=, which is considered to be an intermediate state. + +- {{{kbd(C-c C-x C-b)}}} (~org-toggle-checkbox~) :: + + #+kindex: C-c C-x C-b + Toggle checkbox status or---with prefix argument---checkbox presence + at point. With double prefix argument, set it to =[-]=, which is + considered to be an intermediate state. + + - If there is an active region, toggle the first checkbox in the + region and set all remaining boxes to the same status as the + first. With a prefix argument, add or remove the checkbox for all + items in the region. + + - If point is in a headline, toggle checkboxes in the region between + this headline and the next---so /not/ the entire subtree. + + - If there is no active region, just toggle the checkbox at point. + +- {{{kbd(C-c C-x C-r)}}} (~org-toggle-radio-button~) :: + + #+kindex: C-c C-x C-r + #+findex: org-toggle-radio-button + #+cindex: radio button, checkbox as + Toggle checkbox status by using the checkbox of the item at point as + a radio button: when the checkbox is turned on, all other checkboxes + on the same level will be turned off. With a universal prefix + argument, toggle the presence of the checkbox. With a double prefix + argument, set it to =[-]=. + + #+findex: org-list-checkbox-radio-mode + {{{kbd(C-c C-c)}}} can be told to consider checkboxes as radio buttons by + setting =#+ATTR_ORG: :radio t= right before the list or by calling + {{{kbd(M-x org-list-checkbox-radio-mode)}}} to activate this minor mode. + +- {{{kbd(M-S-RET)}}} (~org-insert-todo-heading~) :: + + #+kindex: M-S-RET + #+findex: org-insert-todo-heading + Insert a new item with a checkbox. This works only if point is + already in a plain list item (see [[*Plain Lists]]). + +- {{{kbd(C-c C-x o)}}} (~org-toggle-ordered-property~) :: + + #+kindex: C-c C-x o + #+findex: org-toggle-ordered-property + #+vindex: org-track-ordered-property-with-tag + Toggle the =ORDERED= property of the entry, to toggle if checkboxes + must be checked off in sequence. A property is used for this + behavior because this should be local to the current entry, not + inherited like a tag. However, if you would like to /track/ the + value of this property with a tag for better visibility, customize + ~org-track-ordered-property-with-tag~. + +- {{{kbd(C-c #)}}} (~org-update-statistics-cookies~) :: + + #+kindex: C-c # + #+findex: org-update-statistics-cookies + Update the statistics cookie in the current outline entry. When + called with a {{{kbd(C-u)}}} prefix, update the entire file. + Checkbox statistic cookies are updated automatically if you toggle + checkboxes with {{{kbd(C-c C-c)}}} and make new ones with + {{{kbd(M-S-RET)}}}. TODO statistics cookies update when changing + TODO states. If you delete boxes/entries or add/change them by + hand, use this command to get things back into sync. + +* Tags +:PROPERTIES: +:DESCRIPTION: Tagging headlines and matching sets of tags. +:END: +#+cindex: tags +#+cindex: headline tagging +#+cindex: matching, tags +#+cindex: sparse tree, tag based + +An excellent way to implement labels and contexts for +cross-correlating information is to assign /tags/ to headlines. Org +mode has extensive support for tags. + +#+vindex: org-tag-faces +Every headline can contain a list of tags; they occur at the end of +the headline. Tags are normal words containing letters, numbers, =_=, +and =@=. Tags must be preceded and followed by a single colon, e.g., +=:work:=. Several tags can be specified, as in =:work:urgent:=. Tags +by default are in bold face with the same color as the headline. You +may specify special faces for specific tags using the variable +~org-tag-faces~, in much the same way as you can for TODO keywords +(see [[*Faces for TODO keywords]]). + +** Tag Inheritance +:PROPERTIES: +:DESCRIPTION: Tags use the tree structure of an outline. +:END: +#+cindex: tag inheritance +#+cindex: inheritance, of tags +#+cindex: sublevels, inclusion into tags match + +/Tags/ make use of the hierarchical structure of outline trees. If +a heading has a certain tag, all subheadings inherit the tag as well. +For example, in the list + +#+begin_example +,* Meeting with the French group :work: +,** Summary by Frank :boss:notes: +,*** TODO Prepare slides for him :action: +#+end_example + +#+texinfo: @noindent +the final heading has the tags =work=, =boss=, =notes=, and =action= +even though the final heading is not explicitly marked with those +tags. You can also set tags that all entries in a file should inherit +just as if these tags were defined in a hypothetical level zero that +surrounds the entire file. Use a line like this[fn:51] + +#+cindex: @samp{FILETAGS}, keyword +: #+FILETAGS: :Peter:Boss:Secret: + +#+vindex: org-use-tag-inheritance +#+vindex: org-tags-exclude-from-inheritance +To limit tag inheritance to specific tags, or to turn it off entirely, +use the variables ~org-use-tag-inheritance~ and +~org-tags-exclude-from-inheritance~. + +#+vindex: org-tags-match-list-sublevels +When a headline matches during a tags search while tag inheritance is +turned on, all the sublevels in the same tree---for a simple match +form---match as well[fn:52]. The list of matches may then become +very long. If you only want to see the first tags match in a subtree, +configure the variable ~org-tags-match-list-sublevels~ (not +recommended). + +#+vindex: org-agenda-use-tag-inheritance +Tag inheritance is relevant when the agenda search tries to match +a tag, either in the ~tags~ or ~tags-todo~ agenda types. In other +agenda types, ~org-use-tag-inheritance~ has no effect. Still, you may +want to have your tags correctly set in the agenda, so that tag +filtering works fine, with inherited tags. Set +~org-agenda-use-tag-inheritance~ to control this: the default value +includes all agenda types, but setting this to ~nil~ can really speed +up agenda generation. + +** Setting Tags +:PROPERTIES: +:DESCRIPTION: How to assign tags to a headline. +:END: +#+cindex: setting tags +#+cindex: tags, setting + +#+kindex: M-TAB +Tags can simply be typed into the buffer at the end of a headline. +After a colon, {{{kbd(M-TAB)}}} offers completion on tags. There is +also a special command for inserting tags: + +- {{{kbd(C-c C-q)}}} (~org-set-tags-command~) :: + + #+kindex: C-c C-q + #+findex: org-set-tags-command + #+cindex: completion, of tags + #+vindex: org-tags-column + Enter new tags for the current headline. Org mode either offers + completion or a special single-key interface for setting tags, see + below. After pressing {{{kbd(RET)}}}, the tags are inserted and + aligned to ~org-tags-column~. When called with a {{{kbd(C-u)}}} + prefix, all tags in the current buffer are aligned to that column, + just to make things look nice. Tags are automatically realigned + after promotion, demotion, and TODO state changes (see [[*Basic TODO + Functionality]]). + +- {{{kbd(C-c C-c)}}} (~org-set-tags-command~) :: + + #+kindex: C-c C-c + When point is in a headline, this does the same as {{{kbd(C-c + C-q)}}}. + +#+vindex: org-complete-tags-always-offer-all-agenda-tags +#+vindex: org-tag-alist +#+cindex: @samp{TAGS}, keyword +Org supports tag insertion based on a /list of tags/. By default this +list is constructed dynamically, containing all tags currently used in +the buffer[fn:53]. You may also globally specify a hard list of tags +with the variable ~org-tag-alist~. Finally you can set the default +tags for a given file using the =TAGS= keyword, like + +#+begin_example +,#+TAGS: @work @home @tennisclub +,#+TAGS: laptop car pc sailboat +#+end_example + +If you have globally defined your preferred set of tags using the +variable ~org-tag-alist~, but would like to use a dynamic tag list in +a specific file, add an empty =TAGS= keyword to that file: + +: #+TAGS: + +#+vindex: org-tag-persistent-alist +If you have a preferred set of tags that you would like to use in +every file, in addition to those defined on a per-file basis by =TAGS= +keyword, then you may specify a list of tags with the variable +~org-tag-persistent-alist~. You may turn this off on a per-file basis +by adding a =STARTUP= keyword to that file: + +: #+STARTUP: noptag + +By default Org mode uses the standard minibuffer completion facilities +for entering tags. However, it also implements another, quicker, tag +selection method called /fast tag selection/. This allows you to +select and deselect tags with just a single key press. For this to +work well you should assign unique letters to most of your commonly +used tags. You can do this globally by configuring the variable +~org-tag-alist~ in your Emacs init file. For example, you may find +the need to tag many items in different files with =@home=. In this +case you can set something like: + +#+begin_src emacs-lisp +(setq org-tag-alist '(("@work" . ?w) ("@home" . ?h) ("laptop" . ?l))) +#+end_src + +If the tag is only relevant to the file you are working on, then you +can instead set the =TAGS= keyword as: + +: #+TAGS: @work(w) @home(h) @tennisclub(t) laptop(l) pc(p) + +The tags interface shows the available tags in a splash window. If +you want to start a new line after a specific tag, insert =\n= into +the tag list + +: #+TAGS: @work(w) @home(h) @tennisclub(t) \n laptop(l) pc(p) + +#+texinfo: @noindent +or write them in two lines: + +#+begin_example +,#+TAGS: @work(w) @home(h) @tennisclub(t) +,#+TAGS: laptop(l) pc(p) +#+end_example + +You can also group together tags that are mutually exclusive by using +braces, as in: + +: #+TAGS: { @work(w) @home(h) @tennisclub(t) } laptop(l) pc(p) + +#+texinfo: @noindent +you indicate that at most one of =@work=, =@home=, and =@tennisclub= +should be selected. Multiple such groups are allowed. + +Do not forget to press {{{kbd(C-c C-c)}}} with point in one of these +lines to activate any changes. + +To set these mutually exclusive groups in the variable +~org-tags-alist~, you must use the dummy tags ~:startgroup~ and +~:endgroup~ instead of the braces. Similarly, you can use ~:newline~ +to indicate a line break. The previous example would be set globally +by the following configuration: + +#+begin_src emacs-lisp +(setq org-tag-alist '((:startgroup . nil) + ("@work" . ?w) ("@home" . ?h) + ("@tennisclub" . ?t) + (:endgroup . nil) + ("laptop" . ?l) ("pc" . ?p))) +#+end_src + +If at least one tag has a selection key then pressing {{{kbd(C-c +C-c)}}} automatically presents you with a special interface, listing +inherited tags, the tags of the current headline, and a list of all +valid tags with corresponding keys[fn:54]. + +Pressing keys assigned to tags adds or removes them from the list of +tags in the current line. Selecting a tag in a group of mutually +exclusive tags turns off any other tag from that group. + +In this interface, you can also use the following special keys: + +- {{{kbd(TAB)}}} :: + + #+kindex: TAB + Enter a tag in the minibuffer, even if the tag is not in the + predefined list. You can complete on all tags present in the buffer + and globally pre-defined tags from ~org-tag-alist~ and + ~org-tag-persistent-alist~. You can also add several tags: just + separate them with a comma. + +- {{{kbd(SPC)}}} :: + + #+kindex: SPC + Clear all tags for this line. + +- {{{kbd(RET)}}} :: + + #+kindex: RET + Accept the modified set. + +- {{{kbd(C-g)}}} :: + + #+kindex: C-g + Abort without installing changes. + +- {{{kbd(q)}}} :: + + #+kindex: q + If {{{kbd(q)}}} is not assigned to a tag, it aborts like + {{{kbd(C-g)}}}. + +- {{{kbd(!)}}} :: + + #+kindex: ! + Turn off groups of mutually exclusive tags. Use this to (as an + exception) assign several tags from such a group. + +- {{{kbd(C-c)}}} :: + + #+kindex: C-c C-c + Toggle auto-exit after the next change (see below). If you are + using expert mode, the first {{{kbd(C-c)}}} displays the selection + window. + +This method lets you assign tags to a headline with very few keys. +With the above setup, you could clear the current tags and set +=@home=, =laptop= and =pc= tags with just the following keys: +{{{kbd(C-c C-c SPC h l p RET)}}}. Switching from =@home= to =@work= +would be done with {{{kbd(C-c C-c w RET)}}} or alternatively with +{{{kbd(C-c C-c C-c w)}}}. Adding the non-predefined tag =sarah= could +be done with {{{kbd(C-c C-c TAB s a r a h RET)}}}. + +#+vindex: org-fast-tag-selection-single-key +If you find that most of the time you need only a single key press to +modify your list of tags, set the variable +~org-fast-tag-selection-single-key~. Then you no longer have to press +{{{kbd(RET)}}} to exit fast tag selection---it exits after the first +change. If you then occasionally need more keys, press {{{kbd(C-c)}}} +to turn off auto-exit for the current tag selection process (in +effect: start selection with {{{kbd(C-c C-c C-c)}}} instead of +{{{kbd(C-c C-c)}}}). If you set the variable to the value ~expert~, +the special window is not even shown for single-key tag selection, it +comes up only when you press an extra {{{kbd(C-c)}}}. + +** Tag Hierarchy +:PROPERTIES: +:DESCRIPTION: Create a hierarchy of tags. +:END: +#+cindex: group tags +#+cindex: tags, groups +#+cindex: tags hierarchy + +Tags can be defined in hierarchies. A tag can be defined as a /group +tag/ for a set of other tags. The group tag can be seen as the +"broader term" for its set of tags. Defining multiple group tags and +nesting them creates a tag hierarchy. + +One use-case is to create a taxonomy of terms (tags) that can be used +to classify nodes in a document or set of documents. + +When you search for a group tag, it return matches for all members in +the group and its subgroups. In an agenda view, filtering by a group +tag displays or hide headlines tagged with at least one of the members +of the group or any of its subgroups. This makes tag searches and +filters even more flexible. + +You can set group tags by using brackets and inserting a colon between +the group tag and its related tags---beware that all whitespaces are +mandatory so that Org can parse this line correctly: + +: #+TAGS: [ GTD : Control Persp ] + +In this example, =GTD= is the group tag and it is related to two other +tags: =Control=, =Persp=. Defining =Control= and =Persp= as group +tags creates a hierarchy of tags: + +#+begin_example +,#+TAGS: [ Control : Context Task ] +,#+TAGS: [ Persp : Vision Goal AOF Project ] +#+end_example + +That can conceptually be seen as a hierarchy of tags: + +- =GTD= + - =Persp= + - =Vision= + - =Goal= + - =AOF= + - =Project= + - =Control= + - =Context= + - =Task= + +You can use the ~:startgrouptag~, ~:grouptags~ and ~:endgrouptag~ +keyword directly when setting ~org-tag-alist~ directly: + +#+begin_src emacs-lisp +(setq org-tag-alist '((:startgrouptag) + ("GTD") + (:grouptags) + ("Control") + ("Persp") + (:endgrouptag) + (:startgrouptag) + ("Control") + (:grouptags) + ("Context") + ("Task") + (:endgrouptag))) +#+end_src + +The tags in a group can be mutually exclusive if using the same group +syntax as is used for grouping mutually exclusive tags together; using +curly brackets. + +: #+TAGS: { Context : @Home @Work @Call } + +When setting ~org-tag-alist~ you can use ~:startgroup~ and ~:endgroup~ +instead of ~:startgrouptag~ and ~:endgrouptag~ to make the tags +mutually exclusive. + +Furthermore, the members of a group tag can also be regular +expressions, creating the possibility of a more dynamic and rule-based +tag structure (see [[*Regular Expressions]]). The regular expressions in +the group must be specified within curly brackets. Here is an +expanded example: + +#+begin_example +,#+TAGS: [ Vision : {V@.+} ] +,#+TAGS: [ Goal : {G@.+} ] +,#+TAGS: [ AOF : {AOF@.+} ] +,#+TAGS: [ Project : {P@.+} ] +#+end_example + +Searching for the tag =Project= now lists all tags also including +regular expression matches for =P@.+=, and similarly for tag searches +on =Vision=, =Goal= and =AOF=. For example, this would work well for +a project tagged with a common project-identifier, e.g., +=P@2014_OrgTags=. + +#+kindex: C-c C-x q +#+findex: org-toggle-tags-groups +#+vindex: org-group-tags +If you want to ignore group tags temporarily, toggle group tags +support with ~org-toggle-tags-groups~, bound to {{{kbd(C-c C-x q)}}}. +If you want to disable tag groups completely, set ~org-group-tags~ to +~nil~. + +** Tag Searches +:PROPERTIES: +:DESCRIPTION: Searching for combinations of tags. +:END: +#+cindex: tag searches +#+cindex: searching for tags + +Once a system of tags has been set up, it can be used to collect +related information into special lists. + +- {{{kbd(C-c / m)}}} or {{{kbd(C-c \)}}} (~org-match-sparse-tree~) :: + + #+kindex: C-c / m + #+kindex: C-c \ + #+findex: org-match-sparse-tree + Create a sparse tree with all headlines matching a tags search. + With a {{{kbd(C-u)}}} prefix argument, ignore headlines that are not + a TODO line. + +- {{{kbd(M-x org-agenda m)}}} (~org-tags-view~) :: + + #+kindex: m @r{(Agenda dispatcher)} + #+findex: org-tags-view + Create a global list of tag matches from all agenda files. See + [[*Matching tags and properties]]. + +- {{{kbd(M-x org-agenda M)}}} (~org-tags-view~) :: + + #+kindex: M @r{(Agenda dispatcher)} + #+vindex: org-tags-match-list-sublevels + Create a global list of tag matches from all agenda files, but check + only TODO items and force checking subitems (see the option + ~org-tags-match-list-sublevels~). + +These commands all prompt for a match string which allows basic +Boolean logic like =+boss+urgent-project1=, to find entries with tags +=boss= and =urgent=, but not =project1=, or =Kathy|Sally= to find +entries which are tagged, like =Kathy= or =Sally=. The full syntax of +the search string is rich and allows also matching against TODO +keywords, entry levels and properties. For a complete description +with many examples, see [[*Matching tags and properties]]. + +* Properties and Columns +:PROPERTIES: +:DESCRIPTION: Storing information about an entry. +:END: +#+cindex: properties + +A property is a key-value pair associated with an entry. Properties +can be set so they are associated with a single entry, with every +entry in a tree, or with the whole buffer. + +There are two main applications for properties in Org mode. First, +properties are like tags, but with a value. Imagine maintaining +a file where you document bugs and plan releases for a piece of +software. Instead of using tags like =release_1=, =release_2=, you +can use a property, say =Release=, that in different subtrees has +different values, such as =1.0= or =2.0=. Second, you can use +properties to implement (very basic) database capabilities in an Org +buffer. Imagine keeping track of your music CDs, where properties +could be things such as the album, artist, date of release, number of +tracks, and so on. + +Properties can be conveniently edited and viewed in column view (see +[[*Column View]]). + +** Property Syntax +:PROPERTIES: +:DESCRIPTION: How properties are spelled out. +:END: +#+cindex: property syntax +#+cindex: drawer, for properties + +Properties are key--value pairs. When they are associated with +a single entry or with a tree they need to be inserted into a special +drawer (see [[*Drawers]]) with the name =PROPERTIES=, which has to be +located right below a headline, and its planning line (see [[*Deadlines +and Scheduling]]) when applicable. Each property is specified on +a single line, with the key---surrounded by colons---first, and the +value after it. Keys are case-insensitive. Here is an example: + +#+begin_example +,* CD collection +,** Classic +,*** Goldberg Variations + :PROPERTIES: + :Title: Goldberg Variations + :Composer: J.S. Bach + :Artist: Glenn Gould + :Publisher: Deutsche Grammophon + :NDisks: 1 + :END: +#+end_example + +Depending on the value of ~org-use-property-inheritance~, a property +set this way is associated either with a single entry, or with the +sub-tree defined by the entry, see [[*Property Inheritance]]. + +You may define the allowed values for a particular property =Xyz= by +setting a property =Xyz_ALL=. This special property is /inherited/, +so if you set it in a level 1 entry, it applies to the entire tree. +When allowed values are defined, setting the corresponding property +becomes easier and is less prone to typing errors. For the example +with the CD collection, we can pre-define publishers and the number of +disks in a box like this: + +#+begin_example +,* CD collection + :PROPERTIES: + :NDisks_ALL: 1 2 3 4 + :Publisher_ALL: "Deutsche Grammophon" Philips EMI + :END: +#+end_example + +Properties can be inserted on buffer level. That means they apply +before the first headline and can be inherited by all entries in a +file. Property blocks defined before first headline needs to be +located at the top of the buffer, allowing only comments above. + +Properties can also be defined using lines like: + +#+cindex: @samp{_ALL} suffix, in properties +#+cindex: @samp{PROPERTY}, keyword +: #+PROPERTY: NDisks_ALL 1 2 3 4 + +#+cindex: @samp{+} suffix, in properties +If you want to add to the value of an existing property, append a =+= +to the property name. The following results in the property =var= +having the value =foo=1 bar=2=. + +#+begin_example +,#+PROPERTY: var foo=1 +,#+PROPERTY: var+ bar=2 +#+end_example + +It is also possible to add to the values of inherited properties. The +following results in the =Genres= property having the value =Classic +Baroque= under the =Goldberg Variations= subtree. + +#+begin_example +,* CD collection +,** Classic + :PROPERTIES: + :Genres: Classic + :END: +,*** Goldberg Variations + :PROPERTIES: + :Title: Goldberg Variations + :Composer: J.S. Bach + :Artist: Glenn Gould + :Publisher: Deutsche Grammophon + :NDisks: 1 + :Genres+: Baroque + :END: +#+end_example + +Note that a property can only have one entry per drawer. + +#+vindex: org-global-properties +Property values set with the global variable ~org-global-properties~ +can be inherited by all entries in all Org files. + +The following commands help to work with properties: + +#+attr_texinfo: :sep , +- {{{kbd(M-TAB)}}} (~pcomplete~) :: + + #+kindex: M-TAB + #+findex: pcomplete + After an initial colon in a line, complete property keys. All keys + used in the current file are offered as possible completions. + +- {{{kbd(C-c C-x p)}}} (~org-set-property~) :: + + #+kindex: C-c C-x p + #+findex: org-set-property + Set a property. This prompts for a property name and a value. If + necessary, the property drawer is created as well. + +- {{{kbd(C-u M-x org-insert-drawer)}}} :: + + #+findex: org-insert-drawer + Insert a property drawer into the current entry. The drawer is + inserted early in the entry, but after the lines with planning + information like deadlines. If before first headline the drawer is + inserted at the top of the drawer after any potential comments. + +- {{{kbd(C-c C-c)}}} (~org-property-action~) :: + + #+kindex: C-c C-c + #+findex: org-property-action + With point in a property drawer, this executes property commands. + +- {{{kbd(C-c C-c s)}}} (~org-set-property~) :: + + #+kindex: C-c C-c s + #+findex: org-set-property + Set a property in the current entry. Both the property and the + value can be inserted using completion. + +- {{{kbd(S-RIGHT)}}} (~org-property-next-allowed-values~), {{{kbd(S-LEFT)}}} (~org-property-previous-allowed-value~) :: + + #+kindex: S-RIGHT + #+kindex: S-LEFT + Switch property at point to the next/previous allowed value. + +- {{{kbd(C-c C-c d)}}} (~org-delete-property~) :: + + #+kindex: C-c C-c d + #+findex: org-delete-property + Remove a property from the current entry. + +- {{{kbd(C-c C-c D)}}} (~org-delete-property-globally~) :: + + #+kindex: C-c C-c D + #+findex: org-delete-property-globally + Globally remove a property, from all entries in the current file. + +- {{{kbd(C-c C-c c)}}} (~org-compute-property-at-point~) :: + + #+kindex: C-c C-c c + #+findex: org-compute-property-at-point + Compute the property at point, using the operator and scope from the + nearest column format definition. + +** Special Properties +:PROPERTIES: +:DESCRIPTION: Access to other Org mode features. +:END: +#+cindex: properties, special + +Special properties provide an alternative access method to Org mode +features, like the TODO state or the priority of an entry, discussed +in the previous chapters. This interface exists so that you can +include these states in a column view (see [[*Column View]]), or to use +them in queries. The following property names are special and should +not be used as keys in the properties drawer: + +#+cindex: @samp{ALLTAGS}, special property +#+cindex: @samp{BLOCKED}, special property +#+cindex: @samp{CLOCKSUM}, special property +#+cindex: @samp{CLOCKSUM_T}, special property +#+cindex: @samp{CLOSED}, special property +#+cindex: @samp{DEADLINE}, special property +#+cindex: @samp{FILE}, special property +#+cindex: @samp{ITEM}, special property +#+cindex: @samp{PRIORITY}, special property +#+cindex: @samp{SCHEDULED}, special property +#+cindex: @samp{TAGS}, special property +#+cindex: @samp{TIMESTAMP}, special property +#+cindex: @samp{TIMESTAMP_IA}, special property +#+cindex: @samp{TODO}, special property +| =ALLTAGS= | All tags, including inherited ones. | +| =BLOCKED= | ~t~ if task is currently blocked by children or siblings. | +| =CATEGORY= | The category of an entry. | +| =CLOCKSUM= | The sum of CLOCK intervals in the subtree. ~org-clock-sum~ | +| | must be run first to compute the values in the current buffer. | +| =CLOCKSUM_T= | The sum of CLOCK intervals in the subtree for today. | +| | ~org-clock-sum-today~ must be run first to compute the | +| | values in the current buffer. | +| =CLOSED= | When was this entry closed? | +| =DEADLINE= | The deadline timestamp. | +| =FILE= | The filename the entry is located in. | +| =ITEM= | The headline of the entry. | +| =PRIORITY= | The priority of the entry, a string with a single letter. | +| =SCHEDULED= | The scheduling timestamp. | +| =TAGS= | The tags defined directly in the headline. | +| =TIMESTAMP= | The first keyword-less timestamp in the entry. | +| =TIMESTAMP_IA= | The first inactive timestamp in the entry. | +| =TODO= | The TODO keyword of the entry. | + +** Property Searches +:PROPERTIES: +:DESCRIPTION: Matching property values. +:END: +#+cindex: properties, searching +#+cindex: searching, of properties + +To create sparse trees and special lists with selection based on +properties, the same commands are used as for tag searches (see [[*Tag +Searches]]). + +- {{{kbd(C-c / m)}}} or {{{kbd(C-c \)}}} (~org-match-sparse-tree~) :: + + #+kindex: C-c / m + #+kindex: C-c \ + #+findex: org-match-sparse-tree + Create a sparse tree with all matching entries. With + a {{{kbd(C-u)}}} prefix argument, ignore headlines that are not + a TODO line. + +- {{{kbd(M-x org-agenda m)}}} (~org-tags-view~) :: + + #+kindex: m @r{(Agenda dispatcher)} + #+findex: org-tags-view + Create a global list of tag/property matches from all agenda files. + +- {{{kbd(M-x org-agenda M)}}} (~org-tags-view~) :: + + #+kindex: M @r{(Agenda dispatcher)} + #+vindex: org-tags-match-list-sublevels + Create a global list of tag matches from all agenda files, but check + only TODO items and force checking of subitems (see the option + ~org-tags-match-list-sublevels~). + +The syntax for the search string is described in [[*Matching tags and +properties]]. + +There is also a special command for creating sparse trees based on a +single property: + +- {{{kbd(C-c / p)}}} :: + + #+kindex: C-c / p + Create a sparse tree based on the value of a property. This first + prompts for the name of a property, and then for a value. A sparse + tree is created with all entries that define this property with the + given value. If you enclose the value in curly braces, it is + interpreted as a regular expression and matched against the property + values (see [[*Regular Expressions]]). + +** Property Inheritance +:PROPERTIES: +:DESCRIPTION: Passing values down a tree. +:END: +#+cindex: properties, inheritance +#+cindex: inheritance, of properties + +#+vindex: org-use-property-inheritance +The outline structure of Org documents lends itself to an inheritance +model of properties: if the parent in a tree has a certain property, +the children can inherit this property. Org mode does not turn this +on by default, because it can slow down property searches +significantly and is often not needed. However, if you find +inheritance useful, you can turn it on by setting the variable +~org-use-property-inheritance~. It may be set to ~t~ to make all +properties inherited from the parent, to a list of properties that +should be inherited, or to a regular expression that matches inherited +properties. If a property has the value ~nil~, this is interpreted as +an explicit un-define of the property, so that inheritance search +stops at this value and returns ~nil~. + +Org mode has a few properties for which inheritance is hard-coded, at +least for the special applications for which they are used: + +- ~COLUMNS~ :: + + #+cindex: @samp{COLUMNS}, property + The =COLUMNS= property defines the format of column view (see + [[*Column View]]). It is inherited in the sense that the level where + a =COLUMNS= property is defined is used as the starting point for + a column view table, independently of the location in the subtree + from where columns view is turned on. + +- ~CATEGORY~ :: + + #+cindex: @samp{CATEGORY}, property + For agenda view, a category set through a =CATEGORY= property + applies to the entire subtree. + +- ~ARCHIVE~ :: + + #+cindex: @samp{ARCHIVE}, property + For archiving, the =ARCHIVE= property may define the archive + location for the entire subtree (see [[*Moving a tree to an archive + file]]). + +- ~LOGGING~ :: + + #+cindex: @samp{LOGGING}, property + The =LOGGING= property may define logging settings for an entry or + a subtree (see [[*Tracking TODO state changes]]). + +** Column View +:PROPERTIES: +:DESCRIPTION: Tabular viewing and editing. +:END: + +A great way to view and edit properties in an outline tree is /column +view/. In column view, each outline node is turned into a table row. +Columns in this table provide access to properties of the entries. +Org mode implements columns by overlaying a tabular structure over the +headline of each item. While the headlines have been turned into +a table row, you can still change the visibility of the outline tree. +For example, you get a compact table by switching to "contents" +view---{{{kbd(S-TAB)}}} {{{kbd(S-TAB)}}}, or simply {{{kbd(c)}}} +while column view is active---but you can still open, read, and edit +the entry below each headline. Or, you can switch to column view +after executing a sparse tree command and in this way get a table only +for the selected items. Column view also works in agenda buffers (see +[[*Agenda Views]]) where queries have collected selected items, possibly +from a number of files. + +*** Defining columns +:PROPERTIES: +:DESCRIPTION: The COLUMNS format property. +:END: +#+cindex: column view, for properties +#+cindex: properties, column view + +Setting up a column view first requires defining the columns. This is +done by defining a column format line. + +**** Scope of column definitions +:PROPERTIES: +:DESCRIPTION: Where defined, where valid? +:END: + +To specify a format that only applies to a specific tree, add +a =COLUMNS= property to the top node of that tree, for example: + +#+begin_example +,** Top node for columns view + :PROPERTIES: + :COLUMNS: %25ITEM %TAGS %PRIORITY %TODO + :END: +#+end_example + +A =COLUMNS= property within a property drawer before first headline +will apply to the entire file. As an addition to property drawers, +keywords can also be defined for an entire file using a line like: + +#+cindex: @samp{COLUMNS}, keyword +: #+COLUMNS: %25ITEM %TAGS %PRIORITY %TODO + +If a =COLUMNS= property is present in an entry, it defines columns for +the entry itself, and for the entire subtree below it. Since the +column definition is part of the hierarchical structure of the +document, you can define columns on level 1 that are general enough +for all sublevels, and more specific columns further down, when you +edit a deeper part of the tree. + +**** Column attributes +:PROPERTIES: +:DESCRIPTION: Appearance and content of a column. +:END: + +A column definition sets the attributes of a column. The general +definition looks like this: + +: %[WIDTH]PROPERTY[(TITLE)][{SUMMARY-TYPE}] + +#+texinfo: @noindent +Except for the percent sign and the property name, all items are +optional. The individual parts have the following meaning: + +- {{{var(WIDTH)}}} :: + + An integer specifying the width of the column in characters. If + omitted, the width is determined automatically. + +- {{{var(PROPERTY)}}} :: + + The property that should be edited in this column. Special + properties representing meta data are allowed here as well (see + [[*Special Properties]]). + +- {{{var(TITLE)}}} :: + + The header text for the column. If omitted, the property name is + used. + +- {{{var(SUMMARY-TYPE)}}} :: + + The summary type. If specified, the column values for parent nodes + are computed from the children[fn:55]. + + Supported summary types are: + + | =+= | Sum numbers in this column. | + | =+;%.1f= | Like =+=, but format result with =%.1f=. | + | =$= | Currency, short for =+;%.2f=. | + | =min= | Smallest number in column. | + | =max= | Largest number. | + | =mean= | Arithmetic mean of numbers. | + | =X= | Checkbox status, =[X]= if all children are =[X]=. | + | =X/= | Checkbox status, =[n/m]=. | + | =X%= | Checkbox status, =[n%]=. | + | =:= | Sum times, HH:MM, plain numbers are minutes. | + | =:min= | Smallest time value in column. | + | =:max= | Largest time value. | + | =:mean= | Arithmetic mean of time values. | + | =@min= | Minimum age[fn:56] (in days/hours/mins/seconds). | + | =@max= | Maximum age (in days/hours/mins/seconds). | + | =@mean= | Arithmetic mean of ages (in days/hours/mins/seconds). | + | =est+= | Add low-high estimates. | + + #+vindex: org-columns-summary-types + You can also define custom summary types by setting + ~org-columns-summary-types~. + +The =est+= summary type requires further explanation. It is used for +combining estimates, expressed as low-high ranges. For example, +instead of estimating a particular task will take 5 days, you might +estimate it as 5--6 days if you're fairly confident you know how much +work is required, or 1--10 days if you do not really know what needs +to be done. Both ranges average at 5.5 days, but the first represents +a more predictable delivery. + +When combining a set of such estimates, simply adding the lows and +highs produces an unrealistically wide result. Instead, =est+= adds +the statistical mean and variance of the subtasks, generating a final +estimate from the sum. For example, suppose you had ten tasks, each +of which was estimated at 0.5 to 2 days of work. Straight addition +produces an estimate of 5 to 20 days, representing what to expect if +everything goes either extremely well or extremely poorly. In +contrast, =est+= estimates the full job more realistically, at 10--15 +days. + +Here is an example for a complete columns definition, along with +allowed values[fn:57]. + +#+begin_example +:COLUMNS: %25ITEM %9Approved(Approved?){X} %Owner %11Status \ + %10Time_Estimate{:} %CLOCKSUM %CLOCKSUM_T +:Owner_ALL: Tammy Mark Karl Lisa Don +:Status_ALL: "In progress" "Not started yet" "Finished" "" +:Approved_ALL: "[ ]" "[X]" +#+end_example + +#+texinfo: @noindent +The first column, =%25ITEM=, means the first 25 characters of the item +itself, i.e., of the headline. You probably always should start the +column definition with the =ITEM= specifier. The other specifiers +create columns =Owner= with a list of names as allowed values, for +=Status= with four different possible values, and for a checkbox field +=Approved=. When no width is given after the =%= character, the +column is exactly as wide as it needs to be in order to fully display +all values. The =Approved= column does have a modified title +(=Approved?=, with a question mark). Summaries are created for the +=Time_Estimate= column by adding time duration expressions like HH:MM, +and for the =Approved= column, by providing an =[X]= status if all +children have been checked. The =CLOCKSUM= and =CLOCKSUM_T= columns +are special, they lists the sums of CLOCK intervals in the subtree, +either for all clocks or just for today. + +*** Using column view +:PROPERTIES: +:DESCRIPTION: How to create and use column view. +:END: + +**** Turning column view on or off +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c C-x C-c)}}} (~org-columns~) :: + + #+kindex: C-c C-x C-c + #+vindex: org-columns + #+vindex: org-columns-default-format + Turn on column view. If point is before the first headline in the + file, column view is turned on for the entire file, using the + =#+COLUMNS= definition. If point is somewhere inside the outline, + this command searches the hierarchy, up from point, for a =COLUMNS= + property that defines a format. When one is found, the column view + table is established for the tree starting at the entry that + contains the =COLUMNS= property. If no such property is found, the + format is taken from the =#+COLUMNS= line or from the variable + ~org-columns-default-format~, and column view is established for the + current entry and its subtree. + +- {{{kbd(r)}}} or {{{kbd(g)}}} on a columns view line (~org-columns-redo~) :: + + #+kindex: r + #+kindex: g + #+findex: org-columns-redo + Recreate the column view, to include recent changes made in the + buffer. + +- {{{kbd(C-c C-c)}}} or {{{kbd(q)}}} on a columns view line (~org-columns-quit~) :: + + #+kindex: q + #+kindex: C-c C-c + #+findex: org-columns-quit + Exit column view. + +**** Editing values +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+attr_texinfo: :sep and +- {{{kbd(LEFT)}}}, {{{kbd(RIGHT)}}}, {{{kbd(UP)}}}, {{{kbd(DOWN)}}} :: + + Move through the column view from field to field. + +- {{{kbd(1..9\,0)}}} :: + + #+kindex: 1..9,0 + Directly select the Nth allowed value, {{{kbd(0)}}} selects the + 10th value. + +- {{{kbd(n)}}} or {{{kbd(S-RIGHT)}}} (~org-columns-next-allowed-value~) and {{{kbd(p)}}} or {{{kbd(S-LEFT)}}} (~org-columns-previous-allowed-value~) :: + + #+kindex: n + #+kindex: S-RIGHT + #+kindex: p + #+kindex: S-LEFT + #+findex: org-columns-next-allowed-value + #+findex: org-columns-previous-allowed-value + Switch to the next/previous allowed value of the field. For this, + you have to have specified allowed values for a property. + +- {{{kbd(e)}}} (~org-columns-edit-value~) :: + + #+kindex: e + #+findex: org-columns-edit-value + Edit the property at point. For the special properties, this + invokes the same interface that you normally use to change that + property. For example, the tag completion or fast selection + interface pops up when editing a =TAGS= property. + +- {{{kbd(C-c C-c)}}} (~org-columns-toggle-or-columns-quit~) :: + + #+kindex: C-c C-c + #+findex: org-columns-toggle-or-columns-quit + When there is a checkbox at point, toggle it. Else exit column + view. + +- {{{kbd(v)}}} (~org-columns-show-value~) :: + + #+kindex: v + #+findex: org-columns-show-value + View the full value of this property. This is useful if the width + of the column is smaller than that of the value. + +- {{{kbd(a)}}} (~org-columns-edit-allowed~) :: + + #+kindex: a + #+findex: org-columns-edit-allowed + Edit the list of allowed values for this property. If the list is + found in the hierarchy, the modified values is stored there. If no + list is found, the new value is stored in the first entry that is + part of the current column view. + +**** Modifying column view on-the-fly +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+attr_texinfo: :sep and +- {{{kbd(<)}}} (~org-columns-narrow~) and {{{kbd(>)}}} (~org-columns-widen~) :: + + #+kindex: < + #+kindex: > + #+findex: org-columns-narrow + #+findex: org-columns-widen + Make the column narrower/wider by one character. + +- {{{kbd(S-M-RIGHT)}}} (~org-columns-new~) :: + + #+kindex: S-M-RIGHT + #+findex: org-columns-new + Insert a new column, to the left of the current column. + +- {{{kbd(S-M-LEFT)}}} (~org-columns-delete~) :: + + #+kindex: S-M-LEFT + #+findex: org-columns-delete + Delete the current column. + +*** Capturing column view +:PROPERTIES: +:DESCRIPTION: A dynamic block for column view. +:END: + +Since column view is just an overlay over a buffer, it cannot be +exported or printed directly. If you want to capture a column view, +use a =columnview= dynamic block (see [[*Dynamic Blocks]]). The frame of +this block looks like this: + +#+cindex: @samp{BEGIN columnview} +#+begin_example +,* The column view +,#+BEGIN: columnview :hlines 1 :id "label" + +,#+END: +#+end_example + +This dynamic block has the following parameters: + +- =:id= :: + + This is the most important parameter. Column view is a feature that + is often localized to a certain (sub)tree, and the capture block + might be at a different location in the file. To identify the tree + whose view to capture, you can use four values: + + - =local= :: + + Use the tree in which the capture block is located. + + - =global= :: + + Make a global view, including all headings in the file. + + - =file:FILENAME= :: + + Run column view at the top of the {{{var(FILENAME)}}} file. + + - =LABEL= :: + + #+cindex: @samp{ID}, property + Call column view in the tree that has an =ID= property with the + value {{{var(LABEL)}}}. You can use {{{kbd(M-x org-id-copy)}}} to + create a globally unique ID for the current entry and copy it to + the kill-ring. + +- =:match= :: + + When set to a string, use this as a tags/property match filter to + select only a subset of the headlines in the scope set by the ~:id~ + parameter. + + +- =:hlines= :: + + When ~t~, insert an hline after every line. When a number N, insert + an hline before each headline with level ~<= N~. + +- =:vlines= :: + + When non-~nil~, force column groups to get vertical lines. + +- =:maxlevel= :: + + When set to a number, do not capture entries below this level. + +- =:skip-empty-rows= :: + + When non-~nil~, skip rows where the only non-empty specifier of + the column view is =ITEM=. + +- =:exclude-tags= :: + + List of tags to exclude from column view table: entries with these + tags will be excluded from the column view. + +- =:indent= :: + + When non-~nil~, indent each =ITEM= field according to its level. + +- =:format= :: + + Specify a column attribute (see [[*Column attributes]]) for the dynamic + block. + +The following commands insert or update the dynamic block: + +- ~org-columns-insert-dblock~ :: + + #+kindex: C-c C-x x + #+findex: org-columns-insert-dblock + Insert a dynamic block capturing a column view. Prompt for the + scope or ID of the view. + + This command can be invoked by calling + ~org-dynamic-block-insert-dblock~ ({{{kbd(C-c C-x x)}}}) and + selecting "columnview" (see [[*Dynamic Blocks]]). + +- {{{kbd(C-c C-c)}}} {{{kbd(C-c C-x C-u)}}} (~org-dblock-update~) :: + + #+kindex: C-c C-c + #+kindex: C-c C-x C-u + #+findex: org-dblock-update + Update dynamic block at point. point needs to be in the =#+BEGIN= + line of the dynamic block. + +- {{{kbd(C-u C-c C-x C-u)}}} (~org-update-all-dblocks~) :: + + #+kindex: C-u C-c C-x C-u + Update all dynamic blocks (see [[*Dynamic Blocks]]). This is useful if + you have several clock table blocks, column-capturing blocks or + other dynamic blocks in a buffer. + +You can add formulas to the column view table and you may add plotting +instructions in front of the table---these survive an update of the +block. If there is a =TBLFM= keyword after the table, the table is +recalculated automatically after an update. + +An alternative way to capture and process property values into a table +is provided by Eric Schulte's =org-collector.el=, which is a package +in =org-contrib=[fn:58]. It provides a general API to collect +properties from entries in a certain scope, and arbitrary Lisp +expressions to process these values before inserting them into a table +or a dynamic block. + +* Dates and Times +:PROPERTIES: +:DESCRIPTION: Making items useful for planning. +:END: +#+cindex: dates +#+cindex: times +#+cindex: timestamp +#+cindex: date stamp + +To assist project planning, TODO items can be labeled with a date +and/or a time. The specially formatted string carrying the date and +time information is called a /timestamp/ in Org mode. This may be +a little confusing because timestamp is often used as indicating when +something was created or last changed. However, in Org mode this term +is used in a much wider sense. + +** Timestamps +:PROPERTIES: +:DESCRIPTION: Assigning a time to a tree entry. +:END: +#+cindex: timestamps +#+cindex: ranges, time +#+cindex: date stamps +#+cindex: deadlines +#+cindex: scheduling + +A timestamp is a specification of a date (possibly with a time or +a range of times) in a special format, either =<2003-09-16 Tue>= or +=<2003-09-16 Tue 09:39>= or =<2003-09-16 Tue 12:00-12:30>=[fn:59]. +A timestamp can appear anywhere in the headline or body of an Org tree +entry. Its presence causes entries to be shown on specific dates in +the agenda (see [[*Weekly/daily agenda]]). We distinguish: + +- Plain timestamp; Event; Appointment :: + + #+cindex: timestamp + #+cindex: appointment + A simple timestamp just assigns a date/time to an item. This is + just like writing down an appointment or event in a paper agenda. + In the agenda display, the headline of an entry associated with + a plain timestamp is shown exactly on that date. + + #+begin_example + ,* Meet Peter at the movies + <2006-11-01 Wed 19:15> + ,* Discussion on climate change + <2006-11-02 Thu 20:00-22:00> + #+end_example + +- Timestamp with repeater interval :: + + #+cindex: timestamp, with repeater interval + A timestamp may contain a /repeater interval/, indicating that it + applies not only on the given date, but again and again after + a certain interval of N days (d), weeks (w), months (m), or years + (y). The following shows up in the agenda every Wednesday: + + #+begin_example + ,* Pick up Sam at school + <2007-05-16 Wed 12:30 +1w> + #+end_example + +- Diary-style expression entries :: + + #+cindex: diary style timestamps + #+cindex: sexp timestamps + For more complex date specifications, Org mode supports using the + special expression diary entries implemented in the Emacs Calendar + package[fn:60]. For example, with optional time: + + #+begin_example + ,* 22:00-23:00 The nerd meeting on every 2nd Thursday of the month + <%%(diary-float t 4 2)> + #+end_example + +- Time/Date range :: + + #+cindex: timerange + #+cindex: date range + Two timestamps connected by =--= denote a range. The headline is + shown on the first and last day of the range, and on any dates that + are displayed and fall in the range. Here is an example: + + #+begin_example + ,** Meeting in Amsterdam + <2004-08-23 Mon>--<2004-08-26 Thu> + #+end_example + +- Inactive timestamp :: + + #+cindex: timestamp, inactive + #+cindex: inactive timestamp + Just like a plain timestamp, but with square brackets instead of + angular ones. These timestamps are inactive in the sense that they + do /not/ trigger an entry to show up in the agenda. + + #+begin_example + ,* Gillian comes late for the fifth time + [2006-11-01 Wed] + #+end_example + +** Creating Timestamps +:PROPERTIES: +:DESCRIPTION: Commands to insert timestamps. +:END: + +For Org mode to recognize timestamps, they need to be in the specific +format. All commands listed below produce timestamps in the correct +format. + +#+attr_texinfo: :sep , +- {{{kbd(C-c .)}}} (~org-time-stamp~) :: + + #+kindex: C-c . + #+findex: org-time-stamp + Prompt for a date and insert a corresponding timestamp. When point + is at an existing timestamp in the buffer, the command is used to + modify this timestamp instead of inserting a new one. When this + command is used twice in succession, a time range is inserted. + + #+kindex: C-u C-c . + #+vindex: org-time-stamp-rounding-minutes + When called with a prefix argument, use the alternative format which + contains date and time. The default time can be rounded to + multiples of 5 minutes. See the option + ~org-time-stamp-rounding-minutes~. + + #+kindex: C-u C-u C-c . + With two prefix arguments, insert an active timestamp with the + current time without prompting. + +- {{{kbd(C-c !)}}} (~org-time-stamp-inactive~) :: + + #+kindex: C-c ! + #+kindex: C-u C-c ! + #+kindex: C-u C-u C-c ! + #+findex: org-time-stamp-inactive + Like {{{kbd(C-c .)}}}, but insert an inactive timestamp that does + not cause an agenda entry. + +- {{{kbd(C-c C-c)}}} :: + + #+kindex: C-c C-c + Normalize timestamp, insert or fix day name if missing or wrong. + +- {{{kbd(C-c <)}}} (~org-date-from-calendar~) :: + + #+kindex: C-c < + #+findex: org-date-from-calendar + Insert a timestamp corresponding to point date in the calendar. + +- {{{kbd(C-c >)}}} (~org-goto-calendar~) :: + + #+kindex: C-c > + #+findex: org-goto-calendar + Access the Emacs calendar for the current date. If there is + a timestamp in the current line, go to the corresponding date + instead. + +- {{{kbd(C-c C-o)}}} (~org-open-at-point~) :: + + #+kindex: C-c C-o + #+findex: org-open-at-point + Access the agenda for the date given by the timestamp or -range at + point (see [[*Weekly/daily agenda]]). + +- {{{kbd(S-LEFT)}}} (~org-timestamp-down-day~), {{{kbd(S-RIGHT)}}} (~org-timestamp-up-day~) :: + + #+kindex: S-LEFT + #+kindex: S-RIGHT + #+findex: org-timestamp-down-day + #+findex: org-timestamp-up-day + Change date at point by one day. These key bindings conflict with + shift-selection and related modes (see [[*Packages that conflict with + Org mode]]). + +- {{{kbd(S-UP)}}} (~org-timestamp-up~), {{{kbd(S-DOWN)}}} (~org-timestamp-down~) :: + + #+kindex: S-UP + #+kindex: S-DOWN + On the beginning or enclosing bracket of a timestamp, change its + type. Within a timestamp, change the item under point. Point can + be on a year, month, day, hour or minute. When the timestamp + contains a time range like =15:30-16:30=, modifying the first time + also shifts the second, shifting the time block with constant + length. To change the length, modify the second time. Note that if + point is in a headline and not at a timestamp, these same keys + modify the priority of an item (see [[*Priorities]]). The key bindings + also conflict with shift-selection and related modes (see [[*Packages + that conflict with Org mode]]). + +- {{{kbd(C-c C-y)}}} (~org-evaluate-time-range~) :: + + #+kindex: C-c C-y + #+findex: org-evaluate-time-range + #+cindex: evaluate time range + Evaluate a time range by computing the difference between start and + end. With a prefix argument, insert result after the time range (in + a table: into the following column). + +*** The date/time prompt +:PROPERTIES: +:DESCRIPTION: How Org mode helps you enter dates and times. +:END: +#+cindex: date, reading in minibuffer +#+cindex: time, reading in minibuffer + +#+vindex: org-read-date-prefer-future +When Org mode prompts for a date/time, the default is shown in default +date/time format, and the prompt therefore seems to ask for a specific +format. But it in fact accepts date/time information in a variety of +formats. Generally, the information should start at the beginning of +the string. Org mode finds whatever information is in there and +derives anything you have not specified from the /default date and +time/. The default is usually the current date and time, but when +modifying an existing timestamp, or when entering the second stamp of +a range, it is taken from the stamp in the buffer. When filling in +information, Org mode assumes that most of the time you want to enter +a date in the future: if you omit the month/year and the given +day/month is /before/ today, it assumes that you mean a future +date[fn:61]. If the date has been automatically shifted into the +future, the time prompt shows this with =(=>F)=. + +For example, let's assume that today is *June 13, 2006*. Here is how +various inputs are interpreted, the items filled in by Org mode are in +*bold*. + +| =3-2-5= | \rArr{} 2003-02-05 | +| =2/5/3= | \rArr{} 2003-02-05 | +| =14= | \rArr{} *2006*-*06*-14 | +| =12= | \rArr{} *2006*-*07*-12 | +| =2/5= | \rArr{} *2007*-02-05 | +| =Fri= | \rArr{} nearest Friday (default date or later) | +| =sep 15= | \rArr{} *2006*-09-15 | +| =feb 15= | \rArr{} *2007*-02-15 | +| =sep 12 9= | \rArr{} 2009-09-12 | +| =12:45= | \rArr{} *2006*-*06*-*13* 12:45 | +| =22 sept 0:34= | \rArr{} *2006*-09-22 0:34 | +| =w4= | \rArr{} ISO week for of the current year *2006* | +| =2012 w4 fri= | \rArr{} Friday of ISO week 4 in 2012 | +| =2012-w04-5= | \rArr{} Same as above | + +Furthermore you can specify a relative date by giving, as the /first/ +thing in the input: a plus/minus sign, a number and a letter---=h=, +=d=, =w=, =m= or =y=---to indicate a change in hours, days, weeks, +months, or years. With =h= the date is relative to the current time, +with the other letters and a single plus or minus, the date is +relative to today at 00:00. With a double plus or minus, it is +relative to the default date. If instead of a single letter, you use +the abbreviation of day name, the date is the Nth such day, e.g.: + +| =+0= | \rArr{} today | +| =.= | \rArr{} today | +| =+2h= | \rArr{} two hours from now | +| =+4d= | \rArr{} four days from today | +| =+4= | \rArr{} same as +4d | +| =+2w= | \rArr{} two weeks from today | +| =++5= | \rArr{} five days from default date | +| =+2tue= | \rArr{} second Tuesday from now | + +#+vindex: parse-time-months +#+vindex: parse-time-weekdays +The function understands English month and weekday abbreviations. If +you want to use un-abbreviated names and/or other languages, configure +the variables ~parse-time-months~ and ~parse-time-weekdays~. + +#+vindex: org-read-date-force-compatible-dates +Not all dates can be represented in a given Emacs implementation. By +default Org mode forces dates into the compatibility range 1970--2037 +which works on all Emacs implementations. If you want to use dates +outside of this range, read the docstring of the variable +~org-read-date-force-compatible-dates~. + +You can specify a time range by giving start and end times or by +giving a start time and a duration (in HH:MM format). Use one or two +dash(es) as the separator in the former case and use =+= as the +separator in the latter case, e.g.: + +| =11am-1:15pm= | \rArr{} 11:00-13:15 | +| =11h-13h15= | \rArr{} same as above | +| =11am--1:15pm= | \rArr{} same as above | +| =11am+2:15= | \rArr{} same as above | + +#+cindex: calendar, for selecting date +#+vindex: org-popup-calendar-for-date-prompt +Parallel to the minibuffer prompt, a calendar is popped up[fn:62]. +When you exit the date prompt, either by clicking on a date in the +calendar, or by pressing {{{kbd(RET)}}}, the date selected in the +calendar is combined with the information entered at the prompt. You +can control the calendar fully from the minibuffer: + +#+kindex: < +#+kindex: > +#+kindex: M-v +#+kindex: C-v +#+kindex: mouse-1 +#+kindex: S-RIGHT +#+kindex: S-LEFT +#+kindex: S-DOWN +#+kindex: S-UP +#+kindex: M-S-RIGHT +#+kindex: M-S-LEFT +#+kindex: RET +#+kindex: . +#+kindex: C-. +#+attr_texinfo: :columns 0.25 0.55 +| {{{kbd(RET)}}} | Choose date at point in calendar. | +| {{{kbd(mouse-1)}}} | Select date by clicking on it. | +| {{{kbd(S-RIGHT)}}} | One day forward. | +| {{{kbd(S-LEFT)}}} | One day backward. | +| {{{kbd(S-DOWN)}}} | One week forward. | +| {{{kbd(S-UP)}}} | One week backward. | +| {{{kbd(M-S-RIGHT)}}} | One month forward. | +| {{{kbd(M-S-LEFT)}}} | One month backward. | +| {{{kbd(>)}}} | Scroll calendar forward by one month. | +| {{{kbd(<)}}} | Scroll calendar backward by one month. | +| {{{kbd(M-v)}}} | Scroll calendar forward by 3 months. | +| {{{kbd(C-v)}}} | Scroll calendar backward by 3 months. | +| {{{kbd(C-.)}}} | Select today's date[fn:63] | + +#+vindex: org-read-date-display-live +The actions of the date/time prompt may seem complex, but I assure you +they will grow on you, and you will start getting annoyed by pretty +much any other way of entering a date/time out there. To help you +understand what is going on, the current interpretation of your input +is displayed live in the minibuffer[fn:64]. + +*** Custom time format +:PROPERTIES: +:DESCRIPTION: Making dates look different. +:END: +#+cindex: custom date/time format +#+cindex: time format, custom +#+cindex: date format, custom + +#+vindex: org-display-custom-times +#+vindex: org-time-stamp-custom-formats +Org mode uses the standard ISO notation for dates and times as it is +defined in ISO 8601. If you cannot get used to this and require +another representation of date and time to keep you happy, you can get +it by customizing the variables ~org-display-custom-times~ and +~org-time-stamp-custom-formats~. + +- {{{kbd(C-c C-x C-t)}}} (~org-toggle-time-stamp-overlays~) :: + + #+kindex: C-c C-x C-t + #+findex: org-toggle-time-stamp-overlays + Toggle the display of custom formats for dates and times. + +Org mode needs the default format for scanning, so the custom +date/time format does not /replace/ the default format. Instead, it +is put /over/ the default format using text properties. This has the +following consequences: + +- You cannot place point onto a timestamp anymore, only before or + after. + +- The {{{kbd(S-UP)}}} and {{{kbd(S-DOWN)}}} keys can no longer be used + to adjust each component of a timestamp. If point is at the + beginning of the stamp, {{{kbd(S-UP)}}} and {{{kbd(S-DOWN)}}} change + the stamp by one day, just like {{{kbd(S-LEFT)}}} + {{{kbd(S-RIGHT)}}}. At the end of the stamp, change the time by one + minute. + +- If the timestamp contains a range of clock times or a repeater, + these are not overlaid, but remain in the buffer as they were. + +- When you delete a timestamp character-by-character, it only + disappears from the buffer after /all/ (invisible) characters + belonging to the ISO timestamp have been removed. + +- If the custom timestamp format is longer than the default and you + are using dates in tables, table alignment will be messed up. If + the custom format is shorter, things do work as expected. + +** Deadlines and Scheduling +:PROPERTIES: +:DESCRIPTION: Planning your work. +:END: + +A timestamp may be preceded by special keywords to facilitate +planning. Both the timestamp and the keyword have to be positioned +immediately after the task they refer to. + +- =DEADLINE= :: + + #+cindex: @samp{DEADLINE} marker + Meaning: the task---most likely a TODO item, though not + necessarily---is supposed to be finished on that date. + + #+vindex: org-deadline-warning-days + On the deadline date, the task is listed in the agenda. In + addition, the agenda for /today/ carries a warning about the + approaching or missed deadline, starting ~org-deadline-warning-days~ + before the due date, and continuing until the entry is marked as + done. An example: + + #+begin_example + ,*** TODO write article about the Earth for the Guide + DEADLINE: <2004-02-29 Sun> + The editor in charge is [[bbdb:Ford Prefect]] + #+end_example + + #+vindex: org-agenda-skip-deadline-prewarning-if-scheduled + You can specify a different lead time for warnings for a specific + deadlines using the following syntax. Here is an example with + a warning period of 5 days =DEADLINE: <2004-02-29 Sun -5d>=. This + warning is deactivated if the task gets scheduled and you set + ~org-agenda-skip-deadline-prewarning-if-scheduled~ to ~t~. + +- =SCHEDULED= :: + + #+cindex: @samp{SCHEDULED} marker + Meaning: you are planning to start working on that task on the given + date. + + #+vindex: org-agenda-skip-scheduled-if-done + The headline is listed under the given date[fn:65]. In addition, + a reminder that the scheduled date has passed is present in the + compilation for /today/, until the entry is marked as done, i.e., + the task is automatically forwarded until completed. + + #+begin_example + ,*** TODO Call Trillian for a date on New Years Eve. + SCHEDULED: <2004-12-25 Sat> + #+end_example + + #+vindex: org-scheduled-delay-days + #+vindex: org-agenda-skip-scheduled-delay-if-deadline + If you want to /delay/ the display of this task in the agenda, use + =SCHEDULED: <2004-12-25 Sat -2d>=: the task is still scheduled on + the 25th but will appear two days later. In case the task contains + a repeater, the delay is considered to affect all occurrences; if + you want the delay to only affect the first scheduled occurrence of + the task, use =--2d= instead. See ~org-scheduled-delay-days~ and + ~org-agenda-skip-scheduled-delay-if-deadline~ for details on how to + control this globally or per agenda. + + #+attr_texinfo: :tag Important + #+begin_quote + Scheduling an item in Org mode should /not/ be understood in the + same way that we understand /scheduling a meeting/. Setting a date + for a meeting is just a simple appointment, you should mark this + entry with a simple plain timestamp, to get this item shown on the + date where it applies. This is a frequent misunderstanding by Org + users. In Org mode, /scheduling/ means setting a date when you want + to start working on an action item. + #+end_quote + +You may use timestamps with repeaters in scheduling and deadline +entries. Org mode issues early and late warnings based on the +assumption that the timestamp represents the /nearest instance/ of the +repeater. However, the use of diary expression entries like + +: <%%(diary-float t 42)> + +#+texinfo: @noindent +in scheduling and deadline timestamps is limited. Org mode does not +know enough about the internals of each function to issue early and +late warnings. However, it shows the item on each day where the +expression entry matches. + +*** Inserting deadlines or schedules +:PROPERTIES: +:DESCRIPTION: Planning items. +:ALT_TITLE: Inserting deadline/schedule +:END: + +The following commands allow you to quickly insert a deadline or to +schedule an item:[fn:66] + +- {{{kbd(C-c C-d)}}} (~org-deadline~) :: + + #+kindex: C-c C-d + #+findex: org-deadline + #+vindex: org-log-redeadline + Insert =DEADLINE= keyword along with a stamp. The insertion happens + in the line directly following the headline. Remove any =CLOSED= + timestamp . When called with a prefix argument, also remove any + existing deadline from the entry. Depending on the variable + ~org-log-redeadline~, take a note when changing an existing + deadline[fn:67]. + +- {{{kbd(C-c C-s)}}} (~org-schedule~) :: + + #+kindex: C-c C-s + #+findex: org-schedule + #+vindex: org-log-reschedule + Insert =SCHEDULED= keyword along with a stamp. The insertion + happens in the line directly following the headline. Remove any + =CLOSED= timestamp. When called with a prefix argument, also remove + the scheduling date from the entry. Depending on the variable + ~org-log-reschedule~, take a note when changing an existing + scheduling time[fn:68]. + +- {{{kbd(C-c / d)}}} (~org-check-deadlines~) :: + + #+kindex: C-c / d + #+findex: org-check-deadlines + #+cindex: sparse tree, for deadlines + #+vindex: org-deadline-warning-days + Create a sparse tree with all deadlines that are either past-due, or + which will become due within ~org-deadline-warning-days~. With + {{{kbd(C-u)}}} prefix, show all deadlines in the file. With + a numeric prefix, check that many days. For example, {{{kbd(C-1 C-c + / d)}}} shows all deadlines due tomorrow. + +- {{{kbd(C-c / b)}}} (~org-check-before-date~) :: + + #+kindex: C-c / b + #+findex: org-check-before-date + Sparse tree for deadlines and scheduled items before a given date. + +- {{{kbd(C-c / a)}}} (~org-check-after-date~) :: + + #+kindex: C-c / a + #+findex: org-check-after-date + Sparse tree for deadlines and scheduled items after a given date. + +Note that ~org-schedule~ and ~org-deadline~ supports setting the date +by indicating a relative time e.g., =+1d= sets the date to the next +day after today, and =--1w= sets the date to the previous week before +any current timestamp. + +*** Repeated tasks +:PROPERTIES: +:DESCRIPTION: Items that show up again and again. +:END: +#+cindex: tasks, repeated +#+cindex: repeated tasks + +Some tasks need to be repeated again and again. Org mode helps to +organize such tasks using a so-called repeater in a =DEADLINE=, +=SCHEDULED=, or plain timestamps[fn:69]. In the following example: + +#+begin_example +,** TODO Pay the rent + DEADLINE: <2005-10-01 Sat +1m> +#+end_example + +#+texinfo: @noindent +the =+1m= is a repeater; the intended interpretation is that the task +has a deadline on =<2005-10-01>= and repeats itself every (one) month +starting from that time. You can use yearly, monthly, weekly, daily +and hourly repeat cookies by using the =y=, =m=, =w=, =d= and =h= +letters. If you need both a repeater and a special warning period in +a deadline entry, the repeater should come first and the warning +period last + +: DEADLINE: <2005-10-01 Sat +1m -3d> + +#+vindex: org-todo-repeat-to-state +Deadlines and scheduled items produce entries in the agenda when they +are over-due, so it is important to be able to mark such an entry as +done once you have done so. When you mark a =DEADLINE= or +a =SCHEDULED= with the TODO keyword =DONE=, it no longer produces +entries in the agenda. The problem with this is, however, is that +then also the /next/ instance of the repeated entry will not be +active. Org mode deals with this in the following way: when you try +to mark such an entry as done, using {{{kbd(C-c C-t)}}}, it shifts the +base date of the repeating timestamp by the repeater interval, and +immediately sets the entry state back to TODO[fn:70]. In the example +above, setting the state to =DONE= would actually switch the date like +this: + +#+begin_example +,** TODO Pay the rent + DEADLINE: <2005-11-01 Tue +1m> +#+end_example + +To mark a task with a repeater as DONE, use {{{kbd(C-- 1 C-c C-t)}}}, +i.e., ~org-todo~ with a numeric prefix argument of =-1=. + +#+vindex: org-log-repeat +A timestamp[fn:71] is added under the deadline, to keep a record that +you actually acted on the previous instance of this deadline. + +As a consequence of shifting the base date, this entry is no longer +visible in the agenda when checking past dates, but all future +instances will be visible. + +With the =+1m= cookie, the date shift is always exactly one month. So +if you have not paid the rent for three months, marking this entry +DONE still keeps it as an overdue deadline. Depending on the task, +this may not be the best way to handle it. For example, if you forgot +to call your father for 3 weeks, it does not make sense to call him +3 times in a single day to make up for it. Finally, there are tasks, +like changing batteries, which should always repeat a certain time +/after/ the last time you did it. For these tasks, Org mode has +special repeaters =++= and =.+=. For example: + +#+begin_example +,** TODO Call Father + DEADLINE: <2008-02-10 Sun ++1w> + Marking this DONE shifts the date by at least one week, but also + by as many weeks as it takes to get this date into the future. + However, it stays on a Sunday, even if you called and marked it + done on Saturday. + +,** TODO Empty kitchen trash + DEADLINE: <2008-02-08 Fri 20:00 ++1d> + Marking this DONE shifts the date by at least one day, and also + by as many days as it takes to get the timestamp into the future. + Since there is a time in the timestamp, the next deadline in the + future will be on today's date if you complete the task before + 20:00. + +,** TODO Check the batteries in the smoke detectors + DEADLINE: <2005-11-01 Tue .+1m> + Marking this DONE shifts the date to one month after today. + +,** TODO Wash my hands + DEADLINE: <2019-04-05 08:00 Sun .+1h> + Marking this DONE shifts the date to exactly one hour from now. +#+end_example + +#+vindex: org-agenda-skip-scheduled-if-deadline-is-shown +You may have both scheduling and deadline information for a specific +task. If the repeater is set for the scheduling information only, you +probably want the repeater to be ignored after the deadline. If so, +set the variable ~org-agenda-skip-scheduled-if-deadline-is-shown~ to +~repeated-after-deadline~. However, any scheduling information +without a repeater is no longer relevant once the task is done, and +thus, removed upon repeating the task. If you want both scheduling +and deadline information to repeat after the same interval, set the +same repeater for both timestamps. + +An alternative to using a repeater is to create a number of copies of +a task subtree, with dates shifted in each copy. The command +{{{kbd(C-c C-x c)}}} was created for this purpose; it is described in +[[*Structure Editing]]. + +** Clocking Work Time +:PROPERTIES: +:DESCRIPTION: Tracking how long you spend on a task. +:END: +#+cindex: clocking time +#+cindex: time clocking + +Org mode allows you to clock the time you spend on specific tasks in +a project. When you start working on an item, you can start the +clock. When you stop working on that task, or when you mark the task +done, the clock is stopped and the corresponding time interval is +recorded. It also computes the total time spent on each +subtree[fn:72] of a project. And it remembers a history or tasks +recently clocked, so that you can jump quickly between a number of +tasks absorbing your time. + +To save the clock history across Emacs sessions, use: + +#+begin_src emacs-lisp +(setq org-clock-persist 'history) +(org-clock-persistence-insinuate) +#+end_src + +#+vindex: org-clock-persist +When you clock into a new task after resuming Emacs, the incomplete +clock[fn:73] is retrieved (see [[*Resolving idle time]]) and you are +prompted about what to do with it. + +*** Clocking commands +:PROPERTIES: +:DESCRIPTION: Starting and stopping a clock. +:END: + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-x C-i)}}} (~org-clock-in~) :: + + #+kindex: C-c C-x C-i + #+findex: org-clock-in + #+vindex: org-clock-into-drawer + #+vindex: org-clock-continuously + #+cindex: @samp{LOG_INTO_DRAWER}, property + Start the clock on the current item (clock-in). This inserts the + =CLOCK= keyword together with a timestamp. If this is not the first + clocking of this item, the multiple =CLOCK= lines are wrapped into + a =LOGBOOK= drawer (see also the variable ~org-clock-into-drawer~). + You can also overrule the setting of this variable for a subtree by + setting a =CLOCK_INTO_DRAWER= or =LOG_INTO_DRAWER= property. When + called with a {{{kbd(C-u)}}} prefix argument, select the task from + a list of recently clocked tasks. With two {{{kbd(C-u C-u)}}} + prefixes, clock into the task at point and mark it as the default + task; the default task is always be available with letter + {{{kbd(d)}}} when selecting a clocking task. With three {{{kbd(C-u + C-u C-u)}}} prefixes, force continuous clocking by starting the + clock when the last clock stopped. + + #+cindex: @samp{CLOCK_MODELINE_TOTAL}, property + #+cindex: @samp{LAST_REPEAT}, property + #+vindex: org-clock-mode-line-total + #+vindex: org-clock-in-prepare-hook + While the clock is running, Org shows the current clocking time in + the mode line, along with the title of the task. The clock time + shown is all time ever clocked for this task and its children. If + the task has an effort estimate (see [[*Effort Estimates]]), the mode + line displays the current clocking time against it[fn:74]. If the + task is a repeating one (see [[*Repeated tasks]]), show only the time + since the last reset of the task[fn:75]. You can exercise more + control over show time with the =CLOCK_MODELINE_TOTAL= property. It + may have the values =current= to show only the current clocking + instance, =today= to show all time clocked on this tasks today---see + also the variable ~org-extend-today-until~, ~all~ to include all + time, or ~auto~ which is the default[fn:76]. Clicking with + {{{kbd(mouse-1)}}} onto the mode line entry pops up a menu with + clocking options. + +- {{{kbd(C-c C-x C-o)}}} (~org-clock-out~) :: + + #+kindex: C-c C-x C-o + #+findex: org-clock-out + #+vindex: org-log-note-clock-out + Stop the clock (clock-out). This inserts another timestamp at the + same location where the clock was last started. It also directly + computes the resulting time in inserts it after the time range as + ==>HH:MM=. See the variable ~org-log-note-clock-out~ for the + possibility to record an additional note together with the clock-out + timestamp[fn:77]. + +- {{{kbd(C-c C-x C-x)}}} (~org-clock-in-last~) :: + + #+kindex: C-c C-x C-x + #+findex: org-clock-in-last + #+vindex: org-clock-continuously + Re-clock the last clocked task. With one {{{kbd(C-u)}}} prefix + argument, select the task from the clock history. With two + {{{kbd(C-u)}}} prefixes, force continuous clocking by starting the + clock when the last clock stopped. + +- {{{kbd(C-c C-x C-e)}}} (~org-clock-modify-effort-estimate~) :: + + #+kindex: C-c C-x C-e + #+findex: org-clock-modify-effort-estimate + Update the effort estimate for the current clock task. + +- {{{kbd(C-c C-c)}}} or {{{kbd(C-c C-y)}}} (~org-evaluate-time-range~) :: + + #+kindex: C-c C-c + #+kindex: C-c C-y + #+findex: org-evaluate-time-range + Recompute the time interval after changing one of the timestamps. + This is only necessary if you edit the timestamps directly. If you + change them with {{{kbd(S-)}}} keys, the update is + automatic. + +- {{{kbd(C-S-UP)}}} (~org-clock-timestamps-up~), {{{kbd(C-S-DOWN)}}} (~org-clock-timestamps-down~) :: + + #+kindex: C-S-UP + #+findex: org-clock-timestamps-up + #+kindex: C-S-DOWN + #+findex: org-clock-timestamps-down + On CLOCK log lines, increase/decrease both timestamps so that the + clock duration keeps the same value. + +- {{{kbd(S-M-UP)}}} (~org-timestamp-up~), {{{kbd(S-M-DOWN)}}} (~org-timestamp-down~) :: + + #+kindex: S-M-UP + #+findex: org-clock-timestamp-up + #+kindex: S-M-DOWN + #+findex: org-clock-timestamp-down + On =CLOCK= log lines, increase/decrease the timestamp at point and + the one of the previous, or the next, clock timestamp by the same + duration. For example, if you hit {{{kbd(S-M-UP)}}} to increase + a clocked-out timestamp by five minutes, then the clocked-in + timestamp of the next clock is increased by five minutes. + +- {{{kbd(C-c C-t)}}} (~org-todo~) :: + + #+kindex: C-c C-t + #+findex: org-todo + Changing the TODO state of an item to DONE automatically stops the + clock if it is running in this same item. + +- {{{kbd(C-c C-x C-q)}}} (~org-clock-cancel~) :: + + #+kindex: C-c C-x C-q + #+findex: org-clock-cancel + Cancel the current clock. This is useful if a clock was started by + mistake, or if you ended up working on something else. + +- {{{kbd(C-c C-x C-j)}}} (~org-clock-goto~) :: + + #+kindex: C-c C-x C-j + #+findex: or-clock-goto + Jump to the headline of the currently clocked in task. With + a {{{kbd(C-u)}}} prefix argument, select the target task from a list + of recently clocked tasks. + +- {{{kbd(C-c C-x C-d)}}} (~org-clock-display~) :: + + #+kindex: C-c C-x C-d + #+findex: org-clock-display + #+vindex: org-remove-highlights-with-change + Display time summaries for each subtree in the current buffer. This + puts overlays at the end of each headline, showing the total time + recorded under that heading, including the time of any subheadings. + You can use visibility cycling to study the tree, but the overlays + disappear when you change the buffer (see variable + ~org-remove-highlights-with-change~) or press {{{kbd(C-c C-c)}}}. + +The {{{kbd(l)}}} key may be used in the agenda (see [[*Weekly/daily +agenda]]) to show which tasks have been worked on or closed during +a day. + +*Important:* note that both ~org-clock-out~ and ~org-clock-in-last~ +can have a global keybinding and do not modify the window disposition. + +*** The clock table +:PROPERTIES: +:DESCRIPTION: Detailed reports. +:END: +#+cindex: clocktable, dynamic block +#+cindex: report, of clocked time + +Org mode can produce quite complex reports based on the time clocking +information. Such a report is called a /clock table/, because it is +formatted as one or several Org tables. + +#+attr_texinfo: :sep , +- ~org-clock-report~ :: + + #+kindex: C-c C-x x + #+findex: org-clock-report + Insert or update a clock table. When called with a prefix argument, + jump to the first clock table in the current document and update it. + The clock table includes archived trees. + + This command can be invoked by calling + ~org-dynamic-block-insert-dblock~ ({{{kbd(C-c C-x x)}}}) and + selecting "clocktable" (see [[*Dynamic Blocks]]). + +- {{{kbd(C-c C-c)}}} or {{{kbd(C-c C-x C-u)}}} (~org-dblock-update~) :: + + #+kindex: C-c C-c + #+kindex: C-c C-x C-u + #+findex: org-dblock-update + Update dynamic block at point. Point needs to be in the =BEGIN= + line of the dynamic block. + +- {{{kbd(C-u C-c C-x C-u)}}} :: + + #+kindex: C-u C-c C-x C-u + Update all dynamic blocks (see [[*Dynamic Blocks]]). This is useful if + you have several clock table blocks in a buffer. + +- {{{kbd(S-LEFT)}}}, {{{kbd(S-RIGHT)}}} (~org-clocktable-try-shift~) :: + + #+kindex: S-LEFT + #+kindex: S-RIGHT + #+findex: org-clocktable-try-shift + Shift the current =:block= interval and update the table. Point + needs to be in the =#+BEGIN: clocktable= line for this command. If + =:block= is =today=, it is shifted to =today-1=, etc. + +Here is an example of the frame for a clock table as it is inserted +into the buffer by ~org-clock-report~: + +#+cindex: @samp{BEGIN clocktable} +#+begin_example +,#+BEGIN: clocktable :maxlevel 2 :emphasize nil :scope file +,#+END: clocktable +#+end_example + +#+vindex: org-clocktable-defaults +The =#+BEGIN= line contains options to define the scope, structure, +and formatting of the report. Defaults for all these options can be +configured in the variable ~org-clocktable-defaults~. + +First there are options that determine which clock entries are to +be selected: + +- =:maxlevel= :: + + Maximum level depth to which times are listed in the table. Clocks + at deeper levels are summed into the upper level. + +- =:scope= :: + + The scope to consider. This can be any of the following: + + | =nil= | the current buffer or narrowed region | + | =file= | the full current buffer | + | =subtree= | the subtree where the clocktable is located | + | =treeN= | the surrounding level N tree, for example =tree3= | + | =tree= | the surrounding level 1 tree | + | =agenda= | all agenda files | + | =("file" ...)= | scan these files | + | =FUNCTION= | scan files returned by calling {{{var(FUNCTION)}}} with no argument | + | =file-with-archives= | current file and its archives | + | =agenda-with-archives= | all agenda files, including archives | + +- =:block= :: + + The time block to consider. This block is specified either + absolutely, or relative to the current time and may be any of these + formats: + + | =2007-12-31= | New year eve 2007 | + | =2007-12= | December 2007 | + | =2007-W50= | ISO-week 50 in 2007 | + | =2007-Q2= | 2nd quarter in 2007 | + | =2007= | the year 2007 | + | =today=, =yesterday=, =today-N= | a relative day | + | =thisweek=, =lastweek=, =thisweek-N= | a relative week | + | =thismonth=, =lastmonth=, =thismonth-N= | a relative month | + | =thisyear=, =lastyear=, =thisyear-N= | a relative year | + | =untilnow=[fn:78] | all clocked time ever | + + #+vindex: org-clock-display-default-range + When this option is not set, Org falls back to the value in + ~org-clock-display-default-range~, which defaults to the current + year. + + Use {{{kbd(S-LEFT)}}} or {{{kbd(S-RIGHT)}}} to shift the time + interval. + +- =:tstart= :: + + A time string specifying when to start considering times. Relative + times like ="<-2w>"= can also be used. See [[*Matching tags and + properties]] for relative time syntax. + +- =:tend= :: + + A time string specifying when to stop considering times. Relative + times like =""= can also be used. See [[*Matching tags and + properties]] for relative time syntax. + +- =:wstart= :: + + The starting day of the week. The default is 1 for Monday. + +- =:mstart= :: + + The starting day of the month. The default is 1 for the first. + +- =:step= :: + + Set to =day=, =week=, =semimonth=, =month=, or =year= to split the + table into chunks. To use this, either =:block=, or =:tstart= and + =:tend= are required. + +- =:stepskip0= :: + + When non-~nil~, do not show steps that have zero time. + +- =:fileskip0= :: + + When non-~nil~, do not show table sections from files which did not + contribute. + +- =:match= :: + + A tags match to select entries that should contribute. See + [[*Matching tags and properties]] for the match syntax. + +#+findex: org-clocktable-write-default +Then there are options that determine the formatting of the table. +There options are interpreted by the function +~org-clocktable-write-default~, but you can specify your own function +using the =:formatter= parameter. + +- =:emphasize= :: + + When non-~nil~, emphasize level one and level two items. + +- =:lang= :: + + Language[fn:79] to use for descriptive cells like "Task". + +- =:link= :: + + Link the item headlines in the table to their origins. + +- =:narrow= :: + + An integer to limit the width of the headline column in the Org + table. If you write it like =50!=, then the headline is also + shortened in export. + +- =:indent= :: + + Indent each headline field according to its level. + +- =:hidefiles= :: + + Hide the file column when multiple files are used to produce the + table. + +- =:tcolumns= :: + + Number of columns to be used for times. If this is smaller than + =:maxlevel=, lower levels are lumped into one column. + +- =:level= :: + + Should a level number column be included? + +- =:sort= :: + + A cons cell containing the column to sort and a sorting type. E.g., + =:sort (1 . ?a)= sorts the first column alphabetically. + +- =:compact= :: + + Abbreviation for =:level nil :indent t :narrow 40! :tcolumns 1=. + All are overwritten except if there is an explicit =:narrow=. + +- =:timestamp= :: + + A timestamp for the entry, when available. Look for =SCHEDULED=, + =DEADLINE=, =TIMESTAMP= and =TIMESTAMP_IA= special properties (see + [[*Special Properties]]), in this order. + +- =:tags= :: + + When this flag is non-~nil~, show the headline's tags. + +- =:properties= :: + + List of properties shown in the table. Each property gets its own + column. + +- =:inherit-props= :: + + When this flag is non-~nil~, the values for =:properties= are + inherited. + +- =:formula= :: + + Content of a =TBLFM= keyword to be added and evaluated. As + a special case, =:formula %= adds a column with % time. If you do + not specify a formula here, any existing formula below the clock + table survives updates and is evaluated. + +- =:formatter= :: + + A function to format clock data and insert it into the buffer. + +To get a clock summary of the current level 1 tree, for the current +day, you could write: + +#+begin_example +,#+BEGIN: clocktable :maxlevel 2 :block today :scope tree1 :link t +,#+END: clocktable +#+end_example + +#+texinfo: @noindent +To use a specific time range you could write[fn:80] + +#+begin_example +,#+BEGIN: clocktable :tstart "<2006-08-10 Thu 10:00>" + :tend "<2006-08-10 Thu 12:00>" +,#+END: clocktable +#+end_example + +#+texinfo: @noindent +A range starting a week ago and ending right now could be written as + +#+begin_example +,#+BEGIN: clocktable :tstart "<-1w>" :tend "" +,#+END: clocktable +#+end_example + +#+texinfo: @noindent +A summary of the current subtree with % times would be + +#+begin_example +,#+BEGIN: clocktable :scope subtree :link t :formula % +,#+END: clocktable +#+end_example + +#+texinfo: @noindent +A horizontally compact representation of everything clocked during +last week would be + +#+begin_example +,#+BEGIN: clocktable :scope agenda :block lastweek :compact t +,#+END: clocktable +#+end_example + +*** Resolving idle time and continuous clocking +:PROPERTIES: +:DESCRIPTION: Resolving time when you've been idle. +:ALT_TITLE: Resolving idle time +:END: + +**** Resolving idle time +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: resolve idle time +#+cindex: idle, resolve, dangling + +If you clock in on a work item, and then walk away from your +computer---perhaps to take a phone call---you often need to +"resolve" the time you were away by either subtracting it from the +current clock, or applying it to another one. + +#+vindex: org-clock-idle-time +#+vindex: org-clock-x11idle-program-name +By customizing the variable ~org-clock-idle-time~ to some integer, +such as 10 or 15, Emacs can alert you when you get back to your +computer after being idle for that many minutes[fn:81], and ask what +you want to do with the idle time. There will be a question waiting +for you when you get back, indicating how much idle time has passed +constantly updated with the current amount, as well as a set of +choices to correct the discrepancy: + +- {{{kbd(k)}}} :: + + #+kindex: k + To keep some or all of the minutes and stay clocked in, press + {{{kbd(k)}}}. Org asks how many of the minutes to keep. Press + {{{kbd(RET)}}} to keep them all, effectively changing nothing, or + enter a number to keep that many minutes. + +- {{{kbd(K)}}} :: + + #+kindex: K + If you use the shift key and press {{{kbd(K)}}}, it keeps however + many minutes you request and then immediately clock out of that + task. If you keep all of the minutes, this is the same as just + clocking out of the current task. + +- {{{kbd(s)}}} :: + + #+kindex: s + To keep none of the minutes, use {{{kbd(s)}}} to subtract all the + away time from the clock, and then check back in from the moment you + returned. + +- {{{kbd(S)}}} :: + + #+kindex: S + To keep none of the minutes and just clock out at the start of the + away time, use the shift key and press {{{kbd(S)}}}. Remember that + using shift always leave you clocked out, no matter which option you + choose. + +- {{{kbd(C)}}} :: + + #+kindex: C + To cancel the clock altogether, use {{{kbd(C)}}}. Note that if + instead of canceling you subtract the away time, and the resulting + clock amount is less than a minute, the clock is still canceled + rather than cluttering up the log with an empty entry. + +What if you subtracted those away minutes from the current clock, and +now want to apply them to a new clock? Simply clock in to any task +immediately after the subtraction. Org will notice that you have +subtracted time "on the books", so to speak, and will ask if you want +to apply those minutes to the next task you clock in on. + +There is one other instance when this clock resolution magic occurs. +Say you were clocked in and hacking away, and suddenly your cat chased +a mouse who scared a hamster that crashed into your UPS's power +button! You suddenly lose all your buffers, but thanks to auto-save +you still have your recent Org mode changes, including your last clock +in. + +If you restart Emacs and clock into any task, Org will notice that you +have a dangling clock which was never clocked out from your last +session. Using that clock's starting time as the beginning of the +unaccounted-for period, Org will ask how you want to resolve that +time. The logic and behavior is identical to dealing with away time +due to idleness; it is just happening due to a recovery event rather +than a set amount of idle time. + +You can also check all the files visited by your Org agenda for +dangling clocks at any time using {{{kbd(M-x org-resolve-clocks +RET)}}} (or {{{kbd(C-c C-x C-z)}}}). + +**** Continuous clocking +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: continuous clocking + +#+vindex: org-clock-continuously +You may want to start clocking from the time when you clocked out the +previous task. To enable this systematically, set +~org-clock-continuously~ to non-~nil~. Each time you clock in, Org +retrieves the clock-out time of the last clocked entry for this +session, and start the new clock from there. + +If you only want this from time to time, use three universal prefix +arguments with ~org-clock-in~ and two {{{kbd(C-u C-u)}}} with +~org-clock-in-last~. + +**** Clocking out automatically after some idle time +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: auto clocking out after idle time + +#+vindex: org-clock-auto-clockout-timer +When you often forget to clock out before being idle and you don't +want to manually set the clocking time to take into account, you can +set ~org-clock-auto-clockout-timer~ to a number of seconds and add +=(org-clock-auto-clockout-insinuate)= to your =.emacs= file. + +When the clock is running and Emacs is idle for more than this number +of seconds, the clock will be clocked out automatically. + +Use =M-x org-clock-toggle-auto-clockout RET= to temporarily turn this +on or off. + +** Effort Estimates +:PROPERTIES: +:DESCRIPTION: Planning work effort in advance. +:END: +#+cindex: effort estimates +#+cindex: @samp{EFFORT}, property +#+vindex: org-effort-property + +If you want to plan your work in a very detailed way, or if you need +to produce offers with quotations of the estimated work effort, you +may want to assign effort estimates to entries. If you are also +clocking your work, you may later want to compare the planned effort +with the actual working time, a great way to improve planning +estimates. + +Effort estimates are stored in a special property =EFFORT=. Multiple +formats are supported, such as =3:12=, =1:23:45=, or =1d3h5min=; see +the file =org-duration.el= for more detailed information about the +format. + +You can set the effort for an entry with the following commands: + +- {{{kbd(C-c C-x e)}}} (~org-set-effort~) :: + + #+kindex: C-c C-x e + #+findex: org-set-effort + Set the effort estimate for the current entry. With a prefix + argument, set it to the next allowed value---see below. This + command is also accessible from the agenda with the {{{kbd(e)}}} + key. + +- {{{kbd(C-c C-x C-e)}}} (~org-clock-modify-effort-estimate~) :: + + #+kindex: C-c C-x C-e + #+findex: org-clock-modify-effort-estimate + Modify the effort estimate of the item currently being clocked. + +Clearly the best way to work with effort estimates is through column +view (see [[*Column View]]). You should start by setting up discrete +values for effort estimates, and a =COLUMNS= format that displays +these values together with clock sums---if you want to clock your +time. For a specific buffer you can use: + +#+begin_example +,#+PROPERTY: Effort_ALL 0 0:10 0:30 1:00 2:00 3:00 4:00 5:00 6:00 7:00 +,#+COLUMNS: %40ITEM(Task) %17Effort(Estimated Effort){:} %CLOCKSUM +#+end_example + +#+texinfo: @noindent +#+vindex: org-global-properties +#+vindex: org-columns-default-format +or, even better, you can set up these values globally by customizing +the variables ~org-global-properties~ and +~org-columns-default-format~. In particular if you want to use this +setup also in the agenda, a global setup may be advised. + +The way to assign estimates to individual items is then to switch to +column mode, and to use {{{kbd(S-RIGHT)}}} and {{{kbd(S-LEFT)}}} to +change the value. The values you enter are immediately summed up in +the hierarchy. In the column next to it, any clocked time is +displayed. + +#+vindex: org-agenda-columns-add-appointments-to-effort-sum +If you switch to column view in the daily/weekly agenda, the effort +column summarizes the estimated work effort for each day[fn:82], and +you can use this to find space in your schedule. To get an overview +of the entire part of the day that is committed, you can set the +option ~org-agenda-columns-add-appointments-to-effort-sum~. The +appointments on a day that take place over a specified time interval +are then also added to the load estimate of the day. + +Effort estimates can be used in secondary agenda filtering that is +triggered with the {{{kbd(/)}}} key in the agenda (see [[*Commands in +the Agenda Buffer]]). If you have these estimates defined consistently, +two or three key presses narrow down the list to stuff that fits into +an available time slot. + +** Taking Notes with a Relative Timer +:PROPERTIES: +:DESCRIPTION: Notes with a running timer. +:ALT_TITLE: Timers +:END: +#+cindex: relative timer +#+cindex: countdown timer + +Org provides two types of timers. There is a relative timer that +counts up, which can be useful when taking notes during, for example, +a meeting or a video viewing. There is also a countdown timer. + +The relative and countdown are started with separate commands. + +- {{{kbd(C-c C-x 0)}}} (~org-timer-start~) :: + + #+kindex: C-c C-x 0 + #+findex: org-timer-start + Start or reset the relative timer. By default, the timer is set + to 0. When called with a {{{kbd(C-u)}}} prefix, prompt the user for + a starting offset. If there is a timer string at point, this is + taken as the default, providing a convenient way to restart taking + notes after a break in the process. When called with a double + prefix argument {{{kbd(C-u C-u)}}}, change all timer strings in the + active region by a certain amount. This can be used to fix timer + strings if the timer was not started at exactly the right moment. + +- {{{kbd(C-c C-x ;)}}} (~org-timer-set-timer~) :: + + #+kindex: C-c C-x ; + #+findex: org-timer-set-timer + #+vindex: org-timer-default-timer + Start a countdown timer. The user is prompted for a duration. + ~org-timer-default-timer~ sets the default countdown value. Giving + a numeric prefix argument overrides this default value. This + command is available as {{{kbd(;)}}} in agenda buffers. + +Once started, relative and countdown timers are controlled with the +same commands. + +- {{{kbd(C-c C-x .)}}} (~org-timer~) :: + + #+kindex: C-c C-x . + #+findex: org-timer + Insert a relative time into the buffer. The first time you use + this, the timer starts. Using a prefix argument restarts it. + +- {{{kbd(C-c C-x -)}}} (~org-timer-item~) :: + + #+kindex: C-c C-x - + #+findex: org-timer-item + Insert a description list item with the current relative time. With + a prefix argument, first reset the timer to 0. + +- {{{kbd(M-RET)}}} (~org-insert-heading~) :: + + #+kindex: M-RET + #+findex: org-insert-heading + Once the timer list is started, you can also use {{{kbd(M-RET)}}} to + insert new timer items. + +- {{{kbd(C-c C-x \,)}}} (~org-timer-pause-or-continue~) :: + + #+kindex: C-c C-x , + #+findex: org-timer-pause-or-continue + Pause the timer, or continue it if it is already paused. + +- {{{kbd(C-c C-x _)}}} (~org-timer-stop~) :: + + #+kindex: C-c C-x _ + #+findex: org-timer-stop + Stop the timer. After this, you can only start a new timer, not + continue the old one. This command also removes the timer from the + mode line. + +* Refiling and Archiving +:PROPERTIES: +:DESCRIPTION: Moving and copying information with ease. +:END: +#+cindex: refiling notes +#+cindex: copying notes +#+cindex: archiving + +Once information is in the system, it may need to be moved around. +Org provides Refile, Copy and Archive commands for this. Refile and +Copy helps with moving and copying outlines. Archiving helps to keep +the system compact and fast. + +** Refile and Copy +:PROPERTIES: +:DESCRIPTION: Moving/copying a tree from one place to another. +:END: +#+cindex: refiling notes +#+cindex: copying notes + +When reviewing the captured data, you may want to refile or to copy +some of the entries into a different list, for example into a project. +Cutting, finding the right location, and then pasting the note is +cumbersome. To simplify this process, you can use the following +special command: + +- {{{kbd(C-c C-w)}}} (~org-refile~) :: + + #+kindex: C-c C-w + #+findex: org-refile + #+vindex: org-reverse-note-order + #+vindex: org-refile-targets + #+vindex: org-refile-use-outline-path + #+vindex: org-outline-path-complete-in-steps + #+vindex: org-refile-allow-creating-parent-nodes + #+vindex: org-log-refile + Refile the entry or region at point. This command offers possible + locations for refiling the entry and lets you select one with + completion. The item (or all items in the region) is filed below + the target heading as a subitem. Depending on + ~org-reverse-note-order~, it is either the first or last subitem. + + By default, all level 1 headlines in the current buffer are + considered to be targets, but you can have more complex definitions + across a number of files. See the variable ~org-refile-targets~ for + details. If you would like to select a location via + a file-path-like completion along the outline path, see the + variables ~org-refile-use-outline-path~ and + ~org-outline-path-complete-in-steps~. If you would like to be able + to create new nodes as new parents for refiling on the fly, check + the variable ~org-refile-allow-creating-parent-nodes~. When the + variable ~org-log-refile~[fn:83] is set, a timestamp or a note is + recorded whenever an entry is refiled. + +- {{{kbd(C-u C-c C-w)}}} :: + + #+kindex: C-u C-c C-w + Use the refile interface to jump to a heading. + +- {{{kbd(C-u C-u C-c C-w)}}} (~org-refile-goto-last-stored~) :: + + #+kindex: C-u C-u C-c C-w + #+findex: org-refile-goto-last-stored + Jump to the location where ~org-refile~ last moved a tree to. + +- {{{kbd(C-2 C-c C-w)}}} :: + + #+kindex: C-2 C-c C-w + Refile as the child of the item currently being clocked. + +- {{{kbd(C-3 C-c C-w)}}} :: + + #+kindex: C-3 C-c C-w + #+vindex: org-refile-keep + Refile and keep the entry in place. Also see ~org-refile-keep~ to + make this the default behavior, and beware that this may result in + duplicated =ID= properties. + +- {{{kbd(C-0 C-c C-w)}}} or {{{kbd(C-u C-u C-u C-c C-w)}}} (~org-refile-cache-clear~) :: + + #+kindex: C-u C-u C-u C-c C-w + #+kindex: C-0 C-c C-w + #+findex: org-refile-cache-clear + #+vindex: org-refile-use-cache + Clear the target cache. Caching of refile targets can be turned on + by setting ~org-refile-use-cache~. To make the command see new + possible targets, you have to clear the cache with this command. + +- {{{kbd(C-c M-w)}}} (~org-refile-copy~) :: + + #+kindex: C-c M-w + #+findex: org-refile-copy + Copying works like refiling, except that the original note is not + deleted. + +- {{{kbd(C-c C-M-w)}}} (~org-refile-reverse~) :: + + #+kindex: C-c C-M-w + #+findex: org-refile-reverse + Works like refiling, except that it temporarily toggles how the + value of ~org-reverse-note-order~ applies to the current buffer. So + if ~org-refile~ would append the entry as the last entry under the + target header, ~org-refile-reverse~ will prepend it as the first + entry, and vice-versa. + +** Archiving +:PROPERTIES: +:DESCRIPTION: What to do with finished products. +:END: +#+cindex: archiving + +When a project represented by a (sub)tree is finished, you may want to +move the tree out of the way and to stop it from contributing to the +agenda. Archiving is important to keep your working files compact and +global searches like the construction of agenda views fast. + +- {{{kbd(C-c C-x C-a)}}} (~org-archive-subtree-default~) :: + + #+kindex: C-c C-x C-a + #+findex: org-archive-subtree-default + #+vindex: org-archive-default-command + Archive the current entry using the command specified in the + variable ~org-archive-default-command~. + +*** Moving a tree to an archive file +:PROPERTIES: +:DESCRIPTION: Moving a tree to an archive file. +:ALT_TITLE: Moving subtrees +:END: +#+cindex: external archiving + +The most common archiving action is to move a project tree to another +file, the archive file. + +- {{{kbd(C-c C-x C-s)}}} or short {{{kbd(C-c $)}}} (~org-archive-subtree~) :: + + #+kindex: C-c C-x C-s + #+kindex: C-c $ + #+findex: org-archive-subtree + #+vindex: org-archive-location + Archive the subtree starting at point position to the location given + by ~org-archive-location~. + +- {{{kbd(C-u C-c C-x C-s)}}} :: + + #+kindex: C-u C-c C-x C-s + Check if any direct children of the current headline could be moved + to the archive. To do this, check each subtree for open TODO + entries. If none is found, the command offers to move it to the + archive location. If point is /not/ on a headline when this command + is invoked, check level 1 trees. + +- {{{kbd(C-u C-u C-c C-x C-s)}}} :: + + #+kindex: C-u C-u C-c C-x C-s + As above, but check subtree for timestamps instead of TODO entries. + The command offers to archive the subtree if it /does/ contain + a timestamp, and that timestamp is in the past. + +#+cindex: archive locations +The default archive location is a file in the same directory as the +current file, with the name derived by appending =_archive= to the +current file name. You can also choose what heading to file archived +items under, with the possibility to add them to a datetree in a file. +For information and examples on how to specify the file and the +heading, see the documentation string of the variable +~org-archive-location~. + +There is also an in-buffer option for setting this variable, for +example: + +#+cindex: @samp{ARCHIVE}, keyword +: #+ARCHIVE: %s_done:: + +#+cindex: ARCHIVE, property +If you would like to have a special archive location for a single +entry or a (sub)tree, give the entry an =ARCHIVE= property with the +location as the value (see [[*Properties and Columns]]). + +#+vindex: org-archive-save-context-info +When a subtree is moved, it receives a number of special properties +that record context information like the file from where the entry +came, its outline path the archiving time etc. Configure the variable +~org-archive-save-context-info~ to adjust the amount of information +added. + +#+vindex: org-archive-subtree-save-file-p +When ~org-archive-subtree-save-file-p~ is non-~nil~, save the target +archive buffer. + +*** Internal archiving +:PROPERTIES: +:DESCRIPTION: Switch off a tree but keep it in the file. +:END: + +#+cindex: @samp{ARCHIVE}, tag +If you want to just switch off---for agenda views---certain subtrees +without moving them to a different file, you can use the =ARCHIVE= +tag. + +A headline that is marked with the =ARCHIVE= tag (see [[*Tags]]) stays at +its location in the outline tree, but behaves in the following way: + +- + #+vindex: org-cycle-open-archived-trees + It does not open when you attempt to do so with a visibility cycling + command (see [[*Visibility Cycling]]). You can force cycling archived + subtrees with {{{kbd(C-TAB)}}}, or by setting the option + ~org-cycle-open-archived-trees~. Also normal outline commands, like + ~outline-show-all~, open archived subtrees. + +- + #+vindex: org-sparse-tree-open-archived-trees + During sparse tree construction (see [[*Sparse Trees]]), matches in + archived subtrees are not exposed, unless you configure the option + ~org-sparse-tree-open-archived-trees~. + +- + #+vindex: org-agenda-skip-archived-trees + During agenda view construction (see [[*Agenda Views]]), the content of + archived trees is ignored unless you configure the option + ~org-agenda-skip-archived-trees~, in which case these trees are + always included. In the agenda you can press {{{kbd(v a)}}} to get + archives temporarily included. + +- + #+vindex: org-export-with-archived-trees + Archived trees are not exported (see [[*Exporting]]), only the headline + is. Configure the details using the variable + ~org-export-with-archived-trees~. + +- + #+vindex: org-columns-skip-archived-trees + Archived trees are excluded from column view unless the variable + ~org-columns-skip-archived-trees~ is configured to ~nil~. + +The following commands help manage the =ARCHIVE= tag: + +- {{{kbd(C-c C-x a)}}} (~org-toggle-archive-tag~) :: + + #+kindex: C-c C-x a + #+findex: org-toggle-archive-tag + Toggle the archive tag for the current headline. When the tag is + set, the headline changes to a shadowed face, and the subtree below + it is hidden. + +- {{{kbd(C-u C-c C-x a)}}} :: + + #+kindex: C-u C-c C-x a + Check if any direct children of the current headline should be + archived. To do this, check each subtree for open TODO entries. If + none is found, the command offers to set the =ARCHIVE= tag for the + child. If point is /not/ on a headline when this command is + invoked, check the level 1 trees. + +- {{{kbd(C-c C-TAB)}}} (~org-force-cycle-archived~) :: + + #+kindex: C-TAB + Cycle a tree even if it is tagged with =ARCHIVE=. + +- {{{kbd(C-c C-x A)}}} (~org-archive-to-archive-sibling~) :: + + #+kindex: C-c C-x A + #+findex: org-archive-to-archive-sibling + Move the current entry to the /Archive Sibling/. This is a sibling + of the entry with the heading =Archive= and the archive tag. The + entry becomes a child of that sibling and in this way retains a lot + of its original context, including inherited tags and approximate + position in the outline. + +* Capture and Attachments +:PROPERTIES: +:DESCRIPTION: Dealing with external data. +:END: +#+cindex: capture +#+cindex: attachments +#+cindex: RSS feeds +#+cindex: Atom feeds +#+cindex: protocols, for external access + +An important part of any organization system is the ability to quickly +capture new ideas and tasks, and to associate reference material with +them. Org does this using a process called /capture/. It also can +store files related to a task (/attachments/) in a special directory. +Finally, it can parse RSS feeds for information. To learn how to let +external programs (for example a web browser) trigger Org to capture +material, see [[*Protocols for External Access]]. + +** Capture +:PROPERTIES: +:DESCRIPTION: Capturing new stuff. +:END: +#+cindex: capture + +Capture lets you quickly store notes with little interruption of your +work flow. Org's method for capturing new items is heavily inspired +by John Wiegley's excellent Remember package. + +*** Setting up capture +:PROPERTIES: +:DESCRIPTION: Where notes will be stored. +:END: + +The following customization sets a default target file for notes. + +#+vindex: org-default-notes-file +#+begin_src emacs-lisp +(setq org-default-notes-file (concat org-directory "/notes.org")) +#+end_src + +You may also define a global key for capturing new material (see +[[*Activation]]). + +*** Using capture +:PROPERTIES: +:DESCRIPTION: Commands to invoke and terminate capture. +:END: + +- {{{kbd(M-x org-capture)}}} (~org-capture~) :: + + #+findex: org-capture + #+cindex: date tree + Display the capture templates menu. If you have templates defined + (see [[*Capture templates]]), it offers these templates for selection or + use a new Org outline node as the default template. It inserts the + template into the target file and switch to an indirect buffer + narrowed to this new node. You may then insert the information you + want. + +- {{{kbd(C-c C-c)}}} (~org-capture-finalize~) :: + + #+kindex: C-c C-c @r{(Capture buffer)} + #+findex: org-capture-finalize + Once you have finished entering information into the capture buffer, + {{{kbd(C-c C-c)}}} returns you to the window configuration before + the capture process, so that you can resume your work without + further distraction. When called with a prefix argument, finalize + and then jump to the captured item. + +- {{{kbd(C-c C-w)}}} (~org-capture-refile~) :: + + #+kindex: C-c C-w @r{(Capture buffer)} + #+findex: org-capture-refile + Finalize the capture process by refiling the note to a different + place (see [[*Refile and Copy]]). Please realize that this is a normal + refiling command that will be executed---so point position at the + moment you run this command is important. If you have inserted + a tree with a parent and children, first move point back to the + parent. Any prefix argument given to this command is passed on to + the ~org-refile~ command. + +- {{{kbd(C-c C-k)}}} (~org-capture-kill~) :: + + #+kindex: C-c C-k @r{(Capture buffer)} + #+findex: org-capture-kill + Abort the capture process and return to the previous state. + +#+kindex: k c @r{(Agenda)} +You can also call ~org-capture~ in a special way from the agenda, +using the {{{kbd(k c)}}} key combination. With this access, any +timestamps inserted by the selected capture template defaults to the +date at point in the agenda, rather than to the current date. + +To find the locations of the last stored capture, use ~org-capture~ +with prefix commands: + +- {{{kbd(C-u M-x org-capture)}}} :: + + Visit the target location of a capture template. You get to select + the template in the usual way. + +- {{{kbd(C-u C-u M-x org-capture)}}} :: + + Visit the last stored capture item in its buffer. + +#+vindex: org-capture-bookmark +#+vindex: org-capture-last-stored +You can also jump to the bookmark ~org-capture-last-stored~, which is +automatically created unless you set ~org-capture-bookmark~ to ~nil~. + +To insert the capture at point in an Org buffer, call ~org-capture~ +with a {{{kbd(C-0)}}} prefix argument. + +*** Capture templates +:PROPERTIES: +:DESCRIPTION: Define the outline of different note types. +:END: +#+cindex: templates, for Capture + +You can use templates for different types of capture items, and for +different target locations. The easiest way to create such templates +is through the customize interface. + +- {{{kbd(C)}}} :: + + #+kindex: C @r{(Capture menu} + #+vindex: org-capture-templates + Customize the variable ~org-capture-templates~. + +Before we give the formal description of template definitions, let's +look at an example. Say you would like to use one template to create +general TODO entries, and you want to put these entries under the +heading =Tasks= in your file =~/org/gtd.org=. Also, a date tree in +the file =journal.org= should capture journal entries. A possible +configuration would look like: + +#+begin_src emacs-lisp +(setq org-capture-templates + '(("t" "Todo" entry (file+headline "~/org/gtd.org" "Tasks") + "* TODO %?\n %i\n %a") + ("j" "Journal" entry (file+datetree "~/org/journal.org") + "* %?\nEntered on %U\n %i\n %a"))) +#+end_src + +If you then press {{{kbd(t)}}} from the capture menu, Org will prepare +the template for you like this: + +#+begin_example +,* TODO + [[file:LINK TO WHERE YOU INITIATED CAPTURE]] +#+end_example + +#+texinfo: @noindent +During expansion of the template, =%a= has been replaced by a link to +the location from where you called the capture command. This can be +extremely useful for deriving tasks from emails, for example. You +fill in the task definition, press {{{kbd(C-c C-c)}}} and Org returns +you to the same place where you started the capture process. + +To define special keys to capture to a particular template without +going through the interactive template selection, you can create your +key binding like this: + +#+begin_src emacs-lisp +(define-key global-map (kbd "C-c x") + (lambda () (interactive) (org-capture nil "x"))) +#+end_src + +**** Template elements +:PROPERTIES: +:DESCRIPTION: What is needed for a complete template entry. +:END: + +Now lets look at the elements of a template definition. Each entry in +~org-capture-templates~ is a list with the following items: + +- keys :: + + The keys that selects the template, as a string, characters only, + for example ="a"=, for a template to be selected with a single key, + or ="bt"= for selection with two keys. When using several keys, + keys using the same prefix key must be sequential in the list and + preceded by a 2-element entry explaining the prefix key, for + example: + + #+begin_src emacs-lisp + ("b" "Templates for marking stuff to buy") + #+end_src + + If you do not define a template for the {{{kbd(C)}}} key, this key + opens the Customize buffer for this complex variable. + +- description :: + + A short string describing the template, shown during selection. + +- type :: + + The type of entry, a symbol. Valid values are: + + - ~entry~ :: + + An Org mode node, with a headline. Will be filed as the child of + the target entry or as a top-level entry. The target file should + be an Org file. + + - ~item~ :: + + A plain list item, placed in the first plain list at the target + location. Again the target file should be an Org file. + + - ~checkitem~ :: + + A checkbox item. This only differs from the plain list item by + the default template. + + - ~table-line~ :: + + A new line in the first table at the target location. Where + exactly the line will be inserted depends on the properties + ~:prepend~ and ~:table-line-pos~ (see below). + + - ~plain~ :: + + Text to be inserted as it is. + +- target :: + + #+vindex: org-default-notes-file + #+vindex: org-directory + Specification of where the captured item should be placed. In Org + files, targets usually define a node. Entries will become children + of this node. Other types will be added to the table or list in the + body of this node. Most target specifications contain a file name. + If that file name is the empty string, it defaults to + ~org-default-notes-file~. A file can also be given as a variable or + as a function called with no argument. When an absolute path is not + specified for a target, it is taken as relative to ~org-directory~. + + Valid values are: + + - =(file "path/to/file")= :: + + Text will be placed at the beginning or end of that file. + + - =(id "id of existing org entry")= :: + + Filing as child of this entry, or in the body of the entry. + + - =(file+headline "filename" "node headline")= :: + + Fast configuration if the target heading is unique in the file. + + - =(file+olp "filename" "Level 1 heading" "Level 2" ...)= :: + + For non-unique headings, the full path is safer. + + - =(file+regexp "filename" "regexp to find location")= :: + + Use a regular expression to position point. + + - =(file+olp+datetree "filename" [ "Level 1 heading" ...])= :: + + This target[fn:84] creates a heading in a date tree[fn:85] for + today's date. If the optional outline path is given, the tree + will be built under the node it is pointing to, instead of at top + level. Check out the ~:time-prompt~ and ~:tree-type~ properties + below for additional options. + + - =(file+function "filename" function-finding-location)= :: + + A function to find the right location in the file. + + - =(clock)= :: + + File to the entry that is currently being clocked. + + - =(function function-finding-location)= :: + + Most general way: write your own function which both visits the + file and moves point to the right location. + +- template :: + + The template for creating the capture item. If you leave this + empty, an appropriate default template will be used. Otherwise this + is a string with escape codes, which will be replaced depending on + time and context of the capture call. You may also get this + template string from a file[fn:86], or dynamically, from a function + using either syntax: + + : (file "/path/to/template-file") + : (function FUNCTION-RETURNING-THE-TEMPLATE) + +- properties :: + + The rest of the entry is a property list of additional options. + Recognized properties are: + + - ~:prepend~ :: + + Normally new captured information will be appended at the target + location (last child, last table line, last list item, ...). + Setting this property changes that. + + - ~:immediate-finish~ :: + + When set, do not offer to edit the information, just file it away + immediately. This makes sense if the template only needs + information that can be added automatically. + + - ~:jump-to-captured~ :: + + When set, jump to the captured entry when finished. + + - ~:empty-lines~ :: + + Set this to the number of lines to insert before and after the new + item. Default 0, and the only other common value is 1. + + - ~:empty-lines-after~ :: + + Set this to the number of lines that should be inserted after the + new item. Overrides ~:empty-lines~ for the number of lines + inserted after. + + - ~:empty-lines-before~ :: + + Set this to the number of lines that should be inserted before the + new item. Overrides ~:empty-lines~ for the number lines inserted + before. + + - ~:clock-in~ :: + + Start the clock in this item. + + - ~:clock-keep~ :: + + Keep the clock running when filing the captured entry. + + - ~:clock-resume~ :: + + If starting the capture interrupted a clock, restart that clock + when finished with the capture. Note that ~:clock-keep~ has + precedence over ~:clock-resume~. When setting both to non-~nil~, + the current clock will run and the previous one will not be + resumed. + + - ~:time-prompt~ :: + + Prompt for a date/time to be used for date/week trees and when + filling the template. Without this property, capture uses the + current date and time. Even if this property has not been set, + you can force the same behavior by calling ~org-capture~ with + a {{{kbd(C-1)}}} prefix argument. + + - ~:tree-type~ :: + + Use ~week~ to make a week tree instead of the month-day tree, + i.e., place the headings for each day under a heading with the + current ISO week. Use ~month~ to group entries by month + only. Default is to group entries by day. + + - ~:unnarrowed~ :: + + Do not narrow the target buffer, simply show the full buffer. + Default is to narrow it so that you only see the new material. + + - ~:table-line-pos~ :: + + Specification of the location in the table where the new line + should be inserted. It should be a string like =II-3= meaning + that the new line should become the third line before the second + horizontal separator line. + + - ~:kill-buffer~ :: + + If the target file was not yet visited when capture was invoked, + kill the buffer again after capture is completed. + + - ~:no-save~ :: + + Do not save the target file after finishing the capture. + + - ~:refile-targets :: Temporarily set ~org-refile-targets~ to the + value of this property. + +**** Template expansion +:PROPERTIES: +:DESCRIPTION: Filling in information about time and context. +:END: + +In the template itself, special "%-escapes"[fn:87] allow dynamic +insertion of content. The templates are expanded in the order given +here: + +- =%[FILE]= :: + + Insert the contents of the file given by {{{var(FILE)}}}. + +- =%(EXP)= :: + + Evaluate Elisp expression {{{var(EXP)}}} and replace it with the + result. The {{{var(EXP)}}} form must return a string. Only + placeholders pre-existing within the template, or introduced with + =%[file]=, are expanded this way. Since this happens after + expanding non-interactive "%-escapes", those can be used to fill the + expression. + +- =%= :: + + The result of format-time-string on the {{{var(FORMAT)}}} + specification. + +- =%t= :: + + Timestamp, date only. + +- =%T= :: + + Timestamp, with date and time. + +- =%u=, =%U= :: + + Like =%t=, =%T= above, but inactive timestamps. + +- =%i= :: + + Initial content, the region when capture is called while the region + is active. If there is text before =%i= on the same line, such as + indentation, and =%i= is not inside a =%(exp)= form, that prefix is + added before every line in the inserted text. + +- =%a= :: + + Annotation, normally the link created with ~org-store-link~. + +- =%A= :: + + Like =%a=, but prompt for the description part. + +- =%l= :: + + Like =%a=, but only insert the literal link. + +- =%L= :: + + Like =%l=, but without brackets (the link content itself). + +- =%c= :: + + Current kill ring head. + +- =%x= :: + + Content of the X clipboard. + +- =%k= :: + + Title of the currently clocked task. + +- =%K= :: + + Link to the currently clocked task. + +- =%n= :: + + User name (taken from ~user-full-name~). + +- =%f= :: + + File visited by current buffer when org-capture was called. + +- =%F= :: + + Full path of the file or directory visited by current buffer. + +- =%:keyword= :: + + Specific information for certain link types, see below. + +- =%^g= :: + + Prompt for tags, with completion on tags in target file. + +- =%^G= :: + + Prompt for tags, with completion all tags in all agenda files. + +- =%^t= :: + + Like =%t=, but prompt for date. Similarly =%^T=, =%^u=, =%^U=. You + may define a prompt like =%^{Birthday}t=. + +- =%^C= :: + + Interactive selection of which kill or clip to use. + +- =%^L= :: + + Like =%^C=, but insert as link. + +- =%^{PROP}p= :: + + Prompt the user for a value for property {{{var(PROP)}}}. You may + specify a default value with =%^{PROP|default}=. + +- =%^{PROMPT}= :: + + Prompt the user for a string and replace this sequence with it. You + may specify a default value and a completion table with + =%^{prompt|default|completion2|completion3...}=. The arrow keys + access a prompt-specific history. + +- =%\N= :: + + Insert the text entered at the {{{var(N)}}}th =%^{PROMPT}=, where + {{{var(N)}}} is a number, starting from 1. + +- =%?= :: + + After completing the template, position point here. + +#+vindex: org-store-link-props +For specific link types, the following keywords are defined[fn:88]: + +#+vindex: org-link-from-user-regexp +| Link type | Available keywords | +|--------------+----------------------------------------------------------| +| bbdb | =%:name=, =%:company= | +| irc | =%:server=, =%:port=, =%:nick= | +| mh, rmail | =%:type=, =%:subject=, =%:message-id= | +| | =%:from=, =%:fromname=, =%:fromaddress= | +| | =%:to=, =%:toname=, =%:toaddress= | +| | =%:date= (message date header field) | +| | =%:date-timestamp= (date as active timestamp) | +| | =%:date-timestamp-inactive= (date as inactive timestamp) | +| | =%:fromto= (either "to NAME" or "from NAME")[fn:89] | +| gnus | =%:group=, for messages also all email fields | +| w3, w3m | =%:url= | +| info | =%:file=, =%:node= | +| calendar | =%:date= | +| org-protocol | =%:link=, =%:description=, =%:annotation= | + +**** Templates in contexts +:PROPERTIES: +:DESCRIPTION: Only show a template in a specific context. +:END: + +#+vindex: org-capture-templates-contexts +To control whether a capture template should be accessible from +a specific context, you can customize +~org-capture-templates-contexts~. Let's say, for example, that you +have a capture template "p" for storing Gnus emails containing +patches. Then you would configure this option like this: + +#+begin_src emacs-lisp +(setq org-capture-templates-contexts + '(("p" ((in-mode . "message-mode"))))) +#+end_src + +You can also tell that the command key {{{kbd(p)}}} should refer to +another template. In that case, add this command key like this: + +#+begin_src emacs-lisp +(setq org-capture-templates-contexts + '(("p" "q" ((in-mode . "message-mode"))))) +#+end_src + +See the docstring of the variable for more information. + +** Attachments +:PROPERTIES: +:DESCRIPTION: Attach files to outlines. +:END: +#+cindex: attachments + +It is often useful to associate reference material with an outline +node. Small chunks of plain text can simply be stored in the subtree +of a project. Hyperlinks (see [[*Hyperlinks]]) can establish associations +with files that live elsewhere on a local, or even remote, computer, +like emails or source code files belonging to a project. + +Another method is /attachments/, which are files located in a +directory belonging to an outline node. Org uses directories either +named by a unique ID of each entry, or by a =DIR= property. + +*** Attachment defaults and dispatcher +:PROPERTIES: +:DESCRIPTION: How to access attachment commands +:END: + +By default, Org attach uses ID properties when adding attachments to +outline nodes. This makes working with attachments fully automated. +There is no decision needed for folder-name or location. ID-based +directories are by default located in the =data/= directory, which +lives in the same directory where your Org file lives[fn:90]. + +When attachments are made using ~org-attach~ a default tag =ATTACH= is +added to the node that gets the attachments. + +For more control over the setup, see [[*Attachment options]]. + +The following commands deal with attachments: + +- {{{kbd(C-c C-a)}}} (~org-attach~) :: + + #+kindex: C-c C-a + #+findex: org-attach + The dispatcher for commands related to the attachment system. After + these keys, a list of commands is displayed and you must press an + additional key to select a command: + + - {{{kbd(a)}}} (~org-attach-attach~) :: + + #+kindex: C-c C-a a + #+findex: org-attach-attach + #+vindex: org-attach-method + Select a file and move it into the task's attachment directory. + The file is copied, moved, or linked, depending on + ~org-attach-method~. Note that hard links are not supported on + all systems. + + - {{{kbd(c)}}}/{{{kbd(m)}}}/{{{kbd(l)}}} :: + + #+kindex: C-c C-a c + #+kindex: C-c C-a m + #+kindex: C-c C-a l + Attach a file using the copy/move/link method. Note that hard + links are not supported on all systems. + + - {{{kbd(b)}}} (~org-attach-buffer~) :: + + #+kindex: C-c C-a b + #+findex: org-attach-buffer + Select a buffer and save it as a file in the task's attachment + directory. + + - {{{kbd(n)}}} (~org-attach-new~) :: + + #+kindex: C-c C-a n + #+findex: org-attach-new + Create a new attachment as an Emacs buffer. + + - {{{kbd(z)}}} (~org-attach-sync~) :: + + #+kindex: C-c C-a z + #+findex: org-attach-sync + Synchronize the current task with its attachment directory, in + case you added attachments yourself. + + - {{{kbd(o)}}} (~org-attach-open~) :: + + #+kindex: C-c C-a o + #+findex: org-attach-open + #+vindex: org-file-apps + Open current task's attachment. If there is more than one, prompt + for a file name first. Opening follows the rules set by + ~org-file-apps~. For more details, see the information on + following hyperlinks (see [[*Handling Links]]). + + - {{{kbd(O)}}} (~org-attach-open-in-emacs~) :: + + #+kindex: C-c C-a O + #+findex: org-attach-open-in-emacs + Also open the attachment, but force opening the file in Emacs. + + - {{{kbd(f)}}} (~org-attach-reveal~) :: + + #+kindex: C-c C-a f + #+findex: org-attach-reveal + Open the current task's attachment directory. + + - {{{kbd(F)}}} (~org-attach-reveal-in-emacs~) :: + + #+kindex: C-c C-a F + #+findex: org-attach-reveal-in-emacs + Also open the directory, but force using Dired in Emacs. + + - {{{kbd(d)}}} (~org-attach-delete-one~) :: + + #+kindex: C-c C-a d + Select and delete a single attachment. + + - {{{kbd(D)}}} (~org-attach-delete-all~) :: + + #+kindex: C-c C-a D + Delete all of a task's attachments. A safer way is to open the + directory in Dired and delete from there. + + - {{{kbd(s)}}} (~org-attach-set-directory~) :: + + #+kindex: C-c C-a s + #+cindex: @samp{DIR}, property + Set a specific directory as the entry's attachment directory. + This works by putting the directory path into the =DIR= + property. + + - {{{kbd(S)}}} (~org-attach-unset-directory~) :: + + #+kindex: C-c C-a S + #+cindex: @samp{DIR}, property + Remove the attachment directory. This command removes the =DIR= + property and asks the user to either move content inside that + folder, if an =ID= property is set, delete the content, or to + leave the attachment directory as is but no longer attached to the + outline node. + +*** Attachment options +:PROPERTIES: +:DESCRIPTION: Configuring the attachment system +:END: + +There are a couple of options for attachments that are worth +mentioning. + +- ~org-attach-id-dir~ :: + #+vindex: org-attach-id-dir + The directory where attachments are stored when =ID= is used as + method. + +- ~org-attach-dir-relative~ :: + #+vindex: org-attach-dir-relative + When setting the =DIR= property on a node using {{{kbd(C-c C-a s)}}} + (~org-attach-set-directory~), absolute links are entered by default. + This option changes that to relative links. + +- ~org-attach-use-inheritance~ :: + #+vindex: org-attach-use-inheritance + By default folders attached to an outline node are inherited from + parents according to ~org-use-property-inheritance~. If one instead + want to set inheritance specifically for Org attach that can be done + using ~org-attach-use-inheritance~. Inheriting documents through + the node hierarchy makes a lot of sense in most cases. Especially + when using attachment links (see [[*Attachment links]]). The following + example shows one use case for attachment inheritance: + + #+begin_example + ,* Chapter A ... + :PROPERTIES: + :DIR: Chapter A/ + :END: + ,** Introduction + Some text + + #+NAME: Image 1 + [[attachment:image 1.jpg]] + #+end_example + + Without inheritance one would not be able to resolve the link to + =image 1.jpg=, since the link is inside a sub-heading to =Chapter + A=. + + Inheritance works the same way for both =ID= and =DIR= property. If + both properties are defined on the same headline then =DIR= takes + precedence. This is also true if inheritance is enabled. If =DIR= + is inherited from a parent node in the outline, that property still + takes precedence over an =ID= property defined on the node itself. + +- ~org-attach-method~ :: + #+vindex: org-attach-method + When attaching files using the dispatcher {{{kbd(C-c C-a)}}} it + defaults to copying files. The behavior can be changed by + customizing ~org-attach-method~. Options are Copy, Move/Rename, + Hard link or Symbolic link. + +- ~org-attach-preferred-new-method~ :: + #+vindex: org-attach-preferred-new-method + This customization lets you choose the default way to attach to + nodes without existing =ID= and =DIR= property. It defaults to ~id~ + but can also be set to ~dir~, ~ask~ or ~nil~. + +- ~org-attach-archive-delete~ :: + #+vindex: org-attach-archive-delete + Configure this to determine if attachments should be deleted or not + when a subtree that has attachments is archived. + +- ~org-attach-auto-tag~ :: + #+vindex: org-attach-auto-tag + When attaching files to a heading it will be assigned a tag + according to what is set here. + +- ~org-attach-id-to-path-function-list~ :: + #+vindex: org-attach-id-to-path-function-list + When =ID= is used for attachments, the ID is parsed into a part of a + directory-path. See ~org-attach-id-uuid-folder-format~ for the + default function. Define a new one and add it as first element in + ~org-attach-id-to-path-function-list~ if you want the folder + structure in any other way. All functions in this list will be + tried when resolving existing ID's into paths, to maintain backward + compatibility with existing folders in your system. + +- ~org-attach-store-link-p~ :: + #+vindex: org-attach-store-link-p + Stores a link to the file that is being attached. The link is + stored in ~org-stored-links~ for later insertion with {{{kbd(C-c + C-l)}}} (see [[*Handling Links]]). Depending on what option is set in + ~org-attach-store-link-p~, the link is stored to either the original + location as a file link, the attachment location as an attachment + link or to the attachment location as a file link. + +- ~org-attach-commands~ :: + #+vindex: org-attach-commands + List of all commands used in the attach dispatcher. + +- ~org-attach-expert~ :: + #+vindex: org-attach-expert + Do not show the splash buffer with the attach dispatcher when + ~org-attach-expert~ is set to non-~nil~. + +See customization group =Org Attach= if you want to change the +default settings. + +*** Attachment links +:PROPERTIES: +:DESCRIPTION: Hyperlink access to attachments +:END: + +Attached files and folders can be referenced using attachment links. +This makes it easy to refer to the material added to an outline node. +Especially if it was attached using the unique ID of the entry! + +#+begin_example +,* TODO Some task + :PROPERTIES: + :ID: 95d50008-c12e-479f-a4f2-cc0238205319 + :END: +See attached document for more information: [[attachment:info.org]] +#+end_example + +See [[*External Links]] for more information about these links. + +*** Automatic version-control with Git +:PROPERTIES: +:DESCRIPTION: Everything safely stored away +:END: + +If the directory attached to an outline node is a Git repository, Org +can be configured to automatically commit changes to that repository +when it sees them. + +To make Org mode take care of versioning of attachments for you, add +the following to your Emacs config: + +#+begin_src emacs-lisp +(require 'org-attach-git) +#+end_src + +*** Attach from Dired +:PROPERTIES: +:DESCRIPTION: Using dired to select an attachment +:END: +#+cindex: attach from Dired +#+findex: org-attach-dired-to-subtree + +It is possible to attach files to a subtree from a Dired buffer. To +use this feature, have one window in Dired mode containing the file(s) +to be attached and another window with point in the subtree that shall +get the attachments. In the Dired window, with point on a file, +{{{kbd(M-x org-attach-dired-to-subtree)}}} attaches the file to the +subtree using the attachment method set by variable +~org-attach-method~. When files are marked in the Dired window then +all marked files get attached. + +Add the following lines to the Emacs init file to have {{{kbd(C-c C-x +a)}}} attach files in Dired buffers. + +#+begin_src emacs-lisp +(add-hook 'dired-mode-hook + (lambda () + (define-key dired-mode-map + (kbd "C-c C-x a") + #'org-attach-dired-to-subtree))) +#+end_src + +The following code shows how to bind the previous command with +a specific attachment method. + +#+begin_src emacs-lisp +(add-hook 'dired-mode-hook + (lambda () + (define-key dired-mode-map (kbd "C-c C-x c") + (lambda () + (interactive) + (let ((org-attach-method 'cp)) + (call-interactively #'org-attach-dired-to-subtree)))))) +#+end_src + +** RSS Feeds +:PROPERTIES: +:DESCRIPTION: Getting input from RSS feeds. +:END: +#+cindex: RSS feeds +#+cindex: Atom feeds + +Org can add and change entries based on information found in RSS feeds +and Atom feeds. You could use this to make a task out of each new +podcast in a podcast feed. Or you could use a phone-based +note-creating service on the web to import tasks into Org. To access +feeds, configure the variable ~org-feed-alist~. The docstring of this +variable has detailed information. With the following + +#+begin_src emacs-lisp +(setq org-feed-alist + '(("Slashdot" + "https://rss.slashdot.org/Slashdot/slashdot" + "~/txt/org/feeds.org" "Slashdot Entries"))) +#+end_src + +#+texinfo: @noindent +new items from the feed provided by =rss.slashdot.org= result in new +entries in the file =~/org/feeds.org= under the heading =Slashdot +Entries=, whenever the following command is used: + +- {{{kbd(C-c C-x g)}}} (~org-feed-update-all~) :: + + #+kindex: C-c C-x g + Collect items from the feeds configured in ~org-feed-alist~ and act + upon them. + +- {{{kbd(C-c C-x G)}}} (~org-feed-goto-inbox~) :: + + #+kindex: C-c C-x G + Prompt for a feed name and go to the inbox configured for this feed. + +Under the same headline, Org creates a drawer =FEEDSTATUS= in which it +stores information about the status of items in the feed, to avoid +adding the same item several times. + +For more information, including how to read atom feeds, see +=org-feed.el= and the docstring of ~org-feed-alist~. + +* Agenda Views +:PROPERTIES: +:DESCRIPTION: Collecting information into views. +:END: +#+cindex: agenda views + +Due to the way Org works, TODO items, time-stamped items, and tagged +headlines can be scattered throughout a file or even a number of +files. To get an overview of open action items, or of events that are +important for a particular date, this information must be collected, +sorted and displayed in an organized way. + +Org can select items based on various criteria and display them in +a separate buffer. Six different view types are provided: + +- an /agenda/ that is like a calendar and shows information for + specific dates, + +- a /TODO list/ that covers all unfinished action items, + +- a /match view/, showings headlines based on the tags, properties, + and TODO state associated with them, + +- a /text search view/ that shows all entries from multiple files that + contain specified keywords, + +- a /stuck projects view/ showing projects that currently do not move + along, and + +- /custom views/ that are special searches and combinations of + different views. + +The extracted information is displayed in a special /agenda buffer/. +This buffer is read-only, but provides commands to visit the +corresponding locations in the original Org files, and even to edit +these files remotely. + +#+vindex: org-agenda-skip-comment-trees +#+vindex: org-agenda-skip-archived-trees +#+cindex: commented entries, in agenda views +#+cindex: archived entries, in agenda views +By default, the report ignores commented (see [[*Comment Lines]]) and +archived (see [[*Internal archiving]]) entries. You can override this by +setting ~org-agenda-skip-comment-trees~ and +~org-agenda-skip-archived-trees~ to ~nil~. + +#+vindex: org-agenda-window-setup +#+vindex: org-agenda-restore-windows-after-quit +Two variables control how the agenda buffer is displayed and whether +the window configuration is restored when the agenda exits: +~org-agenda-window-setup~ and ~org-agenda-restore-windows-after-quit~. + +** Agenda Files +:PROPERTIES: +:DESCRIPTION: Files being searched for agenda information. +:END: +#+cindex: agenda files +#+cindex: files for agenda + +#+vindex: org-agenda-files +The information to be shown is normally collected from all /agenda +files/, the files listed in the variable ~org-agenda-files~[fn:91]. +If a directory is part of this list, all files with the extension +=.org= in this directory are part of the list. + +Thus, even if you only work with a single Org file, that file should +be put into the list[fn:92]. You can customize ~org-agenda-files~, +but the easiest way to maintain it is through the following commands + +#+attr_texinfo: :sep and +- {{{kbd(C-c [)}}} (~org-agenda-file-to-front~) :: + + #+kindex: C-c [ + #+findex: org-agenda-file-to-front + #+cindex: files, adding to agenda list + Add current file to the list of agenda files. The file is added to + the front of the list. If it was already in the list, it is moved + to the front. With a prefix argument, file is added/moved to the + end. + +- {{{kbd(C-c ])}}} (~org-remove-file~) :: + + #+kindex: C-c ] + #+findex: org-remove-file + Remove current file from the list of agenda files. + +- {{{kbd(C-')}}} and {{{kbd(C-\,)}}} (~org-cycle-agenda-files~) :: + + #+kindex: C-' + #+kindex: C-, + #+findex: org-cycle-agenda-files + #+cindex: cycling, of agenda files + Cycle through agenda file list, visiting one file after the other. + +- {{{kbd(M-x org-switchb)}}} :: + + #+findex: org-switchb + Command to use an Iswitchb-like interface to switch to and between + Org buffers. + +#+texinfo: @noindent +The Org menu contains the current list of files and can be used to +visit any of them. + +If you would like to focus the agenda temporarily on a file not in +this list, or on just one file in the list, or even on only a subtree +in a file, then this can be done in different ways. For a single +agenda command, you may press {{{kbd(<)}}} once or several times in +the dispatcher (see [[*The Agenda Dispatcher]]). To restrict the agenda +scope for an extended period, use the following commands: + +- {{{kbd(C-c C-x <)}}} (~org-agenda-set-restriction-lock~) :: + + #+kindex: C-c C-x < + #+findex: org-agenda-set-restriction-lock + Restrict the agenda to the current subtree. If there already is + a restriction at point, remove it. When called with a universal + prefix argument or with point before the first headline in a file, + set the agenda scope to the entire file. This restriction remains + in effect until removed with {{{kbd(C-c C-x >)}}}, or by typing + either {{{kbd(<)}}} or {{{kbd(>)}}} in the agenda dispatcher. If + there is a window displaying an agenda view, the new restriction + takes effect immediately. + +- {{{kbd(C-c C-x >)}}} (~org-agenda-remove-restriction-lock~) :: + + #+kindex: C-c C-x > + #+findex: org-agenda-remove-restriction-lock + Remove the restriction created by {{{kbd(C-c C-x <)}}}. + +When working with Speedbar, you can use the following commands in the +Speedbar frame: + +- {{{kbd(<)}}} (~org-speedbar-set-agenda-restriction~) :: + + #+findex: org-speedbar-set-agenda-restriction + Restrict the agenda to the item---either an Org file or a subtree in + such a file---at point in the Speedbar frame. If agenda is already + restricted there, remove the restriction. If there is a window + displaying an agenda view, the new restriction takes effect + immediately. + +- {{{kbd(>)}}} (~org-agenda-remove-restriction-lock~) :: + + #+findex: org-agenda-remove-restriction-lock + Remove the restriction. + +** The Agenda Dispatcher +:PROPERTIES: +:DESCRIPTION: Keyboard access to agenda views. +:ALT_TITLE: Agenda Dispatcher +:END: +#+cindex: agenda dispatcher +#+cindex: dispatching agenda commands + +The views are created through a dispatcher, accessible with {{{kbd(M-x +org-agenda)}}}, or, better, bound to a global key (see [[*Activation]]). +It displays a menu from which an additional letter is required to +execute a command. The dispatcher offers the following default +commands: + +#+attr_texinfo: :sep , +- {{{kbd(a)}}} :: + + Create the calendar-like agenda (see [[*Weekly/daily agenda]]). + +- {{{kbd(t)}}}, {{{kbd(T)}}} :: + + Create a list of all TODO items (see [[*The global TODO list]]). + +- {{{kbd(m)}}}, {{{kbd(M)}}} :: + + Create a list of headlines matching a given expression (see + [[*Matching tags and properties]]). + +- {{{kbd(s)}}} :: + + #+kindex: s @r{(Agenda dispatcher)} + Create a list of entries selected by a boolean expression of + keywords and/or regular expressions that must or must not occur in + the entry. + +- {{{kbd(/)}}} :: + + #+kindex: / @r{(Agenda dispatcher)} + #+vindex: org-agenda-text-search-extra-files + Search for a regular expression in all agenda files and additionally + in the files listed in ~org-agenda-text-search-extra-files~. This + uses the Emacs command ~multi-occur~. A prefix argument can be used + to specify the number of context lines for each match, default is + 1. + +- {{{kbd(#)}}} :: + + Create a list of stuck projects (see [[*Stuck projects]]). + +- {{{kbd(!)}}} :: + + Configure the list of stuck projects (see [[*Stuck projects]]). + +- {{{kbd(<)}}} :: + + #+kindex: < @r{(Agenda dispatcher)} + Restrict an agenda command to the current buffer[fn:93]. If + narrowing is in effect restrict to the narrowed part of the buffer. + After pressing {{{kbd(<)}}}, you still need to press the character + selecting the command. + +- {{{kbd(< <)}}} :: + + #+kindex: < < @r{(Agenda dispatcher)} + If there is an active region, restrict the following agenda command + to the region. Otherwise, restrict it to the current + subtree[fn:94]. After pressing {{{kbd(< <)}}}, you still need to + press the character selecting the command. + +- {{{kbd(*)}}} :: + + #+kindex: * @r{(Agenda dispatcher)} + #+vindex: org-agenda-sticky + #+findex: org-toggle-sticky-agenda + Toggle sticky agenda views. By default, Org maintains only a single + agenda buffer and rebuilds it each time you change the view, to make + sure everything is always up to date. If you switch between views + often and the build time bothers you, you can turn on sticky agenda + buffers (make this the default by customizing the variable + ~org-agenda-sticky~). With sticky agendas, the dispatcher only + switches to the selected view, you need to update it by hand with + {{{kbd(r)}}} or {{{kbd(g)}}}. You can toggle sticky agenda view any + time with ~org-toggle-sticky-agenda~. + +You can also define custom commands that are accessible through the +dispatcher, just like the default commands. This includes the +possibility to create extended agenda buffers that contain several +blocks together, for example the weekly agenda, the global TODO list +and a number of special tags matches. See [[*Custom Agenda Views]]. + +** The Built-in Agenda Views +:PROPERTIES: +:DESCRIPTION: What is available out of the box? +:ALT_TITLE: Built-in Agenda Views +:END: + +In this section we describe the built-in views. + +*** Weekly/daily agenda +:PROPERTIES: +:DESCRIPTION: The calendar page with current tasks. +:END: +#+cindex: agenda +#+cindex: weekly agenda +#+cindex: daily agenda + +The purpose of the weekly/daily /agenda/ is to act like a page of +a paper agenda, showing all the tasks for the current week or day. + +- {{{kbd(M-x org-agenda a)}}} (~org-agenda-list~) :: + + #+kindex: a @r{(Agenda dispatcher)} + #+findex: org-agenda-list + #+cindex: org-agenda, command + Compile an agenda for the current week from a list of Org files. + The agenda shows the entries for each day. With a numeric prefix + argument[fn:95]---like {{{kbd(C-u 2 1 M-x org-agenda a)}}}---you may + set the number of days to be displayed. + +#+vindex: org-agenda-span +#+vindex: org-agenda-start-day +#+vindex: org-agenda-start-on-weekday +The default number of days displayed in the agenda is set by the +variable ~org-agenda-span~. This variable can be set to any number of +days you want to see by default in the agenda, or to a span name, such +a ~day~, ~week~, ~month~ or ~year~. For weekly agendas, the default +is to start on the previous Monday (see +~org-agenda-start-on-weekday~). You can also set the start date using +a date shift: =(setq org-agenda-start-day "+10d")= starts the agenda +ten days from today in the future. + +Remote editing from the agenda buffer means, for example, that you can +change the dates of deadlines and appointments from the agenda buffer. +The commands available in the Agenda buffer are listed in [[*Commands in +the Agenda Buffer]]. + +**** Calendar/Diary integration +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: calendar integration +#+cindex: diary integration + +Emacs contains the calendar and diary by Edward\nbsp{}M.\nbsp{}Reingold. The +calendar displays a three-month calendar with holidays from different +countries and cultures. The diary allows you to keep track of +anniversaries, lunar phases, sunrise/set, recurrent appointments +(weekly, monthly) and more. In this way, it is quite complementary to +Org. It can be very useful to combine output from Org with the diary. + +In order to include entries from the Emacs diary into Org mode's +agenda, you only need to customize the variable + +#+begin_src emacs-lisp +(setq org-agenda-include-diary t) +#+end_src + +#+texinfo: @noindent +After that, everything happens automatically. All diary entries +including holidays, anniversaries, etc., are included in the agenda +buffer created by Org mode. {{{kbd(SPC)}}}, {{{kbd(TAB)}}}, and +{{{kbd(RET)}}} can be used from the agenda buffer to jump to the diary +file in order to edit existing diary entries. The {{{kbd(i)}}} +command to insert new entries for the current date works in the agenda +buffer, as well as the commands {{{kbd(S)}}}, {{{kbd(M)}}}, and +{{{kbd(C)}}} to display Sunrise/Sunset times, show lunar phases and to +convert to other calendars, respectively. {{{kbd(c)}}} can be used to +switch back and forth between calendar and agenda. + +If you are using the diary only for expression entries and holidays, +it is faster to not use the above setting, but instead to copy or even +move the entries into an Org file. Org mode evaluates diary-style +expression entries, and does it faster because there is no overhead +for first creating the diary display. Note that the expression +entries must start at the left margin, no whitespace is allowed before +them, as seen in the following segment of an Org file:[fn:96] + +#+begin_example +,* Holidays + :PROPERTIES: + :CATEGORY: Holiday + :END: +%%(org-calendar-holiday) ; special function for holiday names + +,* Birthdays + :PROPERTIES: + :CATEGORY: Ann + :END: +%%(org-anniversary 1956 5 14) Arthur Dent is %d years old +%%(org-anniversary 1869 10 2) Mahatma Gandhi would be %d years old +#+end_example + +**** Anniversaries from BBDB +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: BBDB, anniversaries +#+cindex: anniversaries, from BBDB + +#+findex: org-bbdb-anniversaries +If you are using the Insidious Big Brother Database to store your +contacts, you very likely prefer to store anniversaries in BBDB rather +than in a separate Org or diary file. Org supports this and can show +BBDB anniversaries as part of the agenda. All you need to do is to +add the following to one of your agenda files: + +#+begin_example +,* Anniversaries + :PROPERTIES: + :CATEGORY: Anniv + :END: +%%(org-bbdb-anniversaries) +#+end_example + +You can then go ahead and define anniversaries for a BBDB record. +Basically, you need a field named =anniversary= for the BBDB record +which contains the date in the format =YYYY-MM-DD= or =MM-DD=, +followed by a space and the class of the anniversary (=birthday=, +=wedding=, or a format string). If you omit the class, it defaults to +=birthday=. Here are a few examples, the header for the file +=ol-bbdb.el= contains more detailed information. + +#+begin_example +1973-06-22 +06-22 +1955-08-02 wedding +2008-04-14 %s released version 6.01 of Org mode, %d years ago +#+end_example + +After a change to BBDB, or for the first agenda display during an +Emacs session, the agenda display suffers a short delay as Org updates +its hash with anniversaries. However, from then on things will be +very fast, much faster in fact than a long list of +=%%(diary-anniversary)= entries in an Org or Diary file. + +#+findex: org-bbdb-anniversaries-future +If you would like to see upcoming anniversaries with a bit of +forewarning, you can use the following instead: + +#+begin_example +,* Anniversaries + :PROPERTIES: + :CATEGORY: Anniv + :END: +%%(org-bbdb-anniversaries-future 3) +#+end_example + +That will give you three days' warning: on the anniversary date itself +and the two days prior. The argument is optional: if omitted, it +defaults to 7. + +**** Appointment reminders +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: @file{appt.el} +#+cindex: appointment reminders +#+cindex: appointment +#+cindex: reminders + +#+cindex: APPT_WARNTIME, keyword +Org can interact with Emacs appointments notification facility. To +add the appointments of your agenda files, use the command +~org-agenda-to-appt~. This command lets you filter through the list +of your appointments and add only those belonging to a specific +category or matching a regular expression. It also reads +a =APPT_WARNTIME= property which overrides the value of +~appt-message-warning-time~ for this appointment. See the docstring +for details. + +*** The global TODO list +:PROPERTIES: +:DESCRIPTION: All unfinished action items. +:ALT_TITLE: Global TODO list +:END: +#+cindex: global TODO list +#+cindex: TODO list, global + +The global TODO list contains all unfinished TODO items formatted and +collected into a single place. + +- {{{kbd(M-x org-agenda t)}}} (~org-todo-list~) :: + + #+kindex: t @r{(Agenda dispatcher)} + #+findex: org-todo-list + Show the global TODO list. This collects the TODO items from all + agenda files (see [[*Agenda Views]]) into a single buffer. By default, + this lists items with a state the is not a DONE state. The buffer + is in Agenda mode, so there are commands to examine and manipulate + the TODO entries directly from that buffer (see [[*Commands in the + Agenda Buffer]]). + +- {{{kbd(M-x org-agenda T)}}} (~org-todo-list~) :: + + #+kindex: T @r{(Agenda dispatcher)} + #+findex: org-todo-list + #+cindex: TODO keyword matching + #+vindex: org-todo-keywords + Like the above, but allows selection of a specific TODO keyword. + You can also do this by specifying a prefix argument to + {{{kbd(t)}}}. You are prompted for a keyword, and you may also + specify several keywords by separating them with =|= as the boolean + OR operator. With a numeric prefix, the Nth keyword in + ~org-todo-keywords~ is selected. + + #+kindex: r + The {{{kbd(r)}}} key in the agenda buffer regenerates it, and you + can give a prefix argument to this command to change the selected + TODO keyword, for example {{{kbd(3 r)}}}. If you often need + a search for a specific keyword, define a custom command for it (see + [[*The Agenda Dispatcher]]). + + Matching specific TODO keywords can also be done as part of a tags + search (see [[*Tag Searches]]). + +Remote editing of TODO items means that you can change the state of +a TODO entry with a single key press. The commands available in the +TODO list are described in [[*Commands in the Agenda Buffer]]. + +#+cindex: sublevels, inclusion into TODO list +Normally the global TODO list simply shows all headlines with TODO +keywords. This list can become very long. There are two ways to keep +it more compact: + +- + #+vindex: org-agenda-todo-ignore-scheduled + #+vindex: org-agenda-todo-ignore-deadlines + #+vindex: org-agenda-todo-ignore-timestamp + #+vindex: org-agenda-todo-ignore-with-date + Some people view a TODO item that has been /scheduled/ for execution + or have a /deadline/ (see [[*Timestamps]]) as no longer /open/. + Configure the variables ~org-agenda-todo-ignore-scheduled~ to + exclude some or all scheduled items from the global TODO list, + ~org-agenda-todo-ignore-deadlines~ to exclude some or all items with + a deadline set, ~org-agenda-todo-ignore-timestamp~ to exclude some + or all items with an active timestamp other than a DEADLINE or + a SCHEDULED timestamp and/or ~org-agenda-todo-ignore-with-date~ to + exclude items with at least one active timestamp. + +- + #+vindex: org-agenda-todo-list-sublevels + TODO items may have sublevels to break up the task into subtasks. + In such cases it may be enough to list only the highest level TODO + headline and omit the sublevels from the global list. Configure the + variable ~org-agenda-todo-list-sublevels~ to get this behavior. + +*** Matching tags and properties +:PROPERTIES: +:DESCRIPTION: Structured information with fine-tuned search. +:END: +#+cindex: matching, of tags +#+cindex: matching, of properties +#+cindex: tags view +#+cindex: match view + +If headlines in the agenda files are marked with /tags/ (see [[*Tags]]), +or have properties (see [[*Properties and Columns]]), you can select +headlines based on this metadata and collect them into an agenda +buffer. The match syntax described here also applies when creating +sparse trees with {{{kbd(C-c / m)}}}. + +- {{{kbd(M-x org-agenda m)}}} (~org-tags-view~) :: + + #+kindex: m @r{(Agenda dispatcher)} + #+findex: org-tags-view + Produce a list of all headlines that match a given set of tags. The + command prompts for a selection criterion, which is a boolean logic + expression with tags, like =+work+urgent-withboss= or =work|home= + (see [[*Tags]]). If you often need a specific search, define a custom + command for it (see [[*The Agenda Dispatcher]]). + +- {{{kbd(M-x org-agenda M)}}} (~org-tags-view~) :: + + #+kindex: M @r{(Agenda dispatcher)} + #+findex: org-tags-view + #+vindex: org-tags-match-list-sublevels + #+vindex: org-agenda-tags-todo-honor-ignore-options + Like {{{kbd(m)}}}, but only select headlines that are also TODO + items and force checking subitems (see the variable + ~org-tags-match-list-sublevels~). To exclude scheduled/deadline + items, see the variable ~org-agenda-tags-todo-honor-ignore-options~. + Matching specific TODO keywords together with a tags match is also + possible, see [[*Tag Searches]]. + +The commands available in the tags list are described in [[*Commands in +the Agenda Buffer]]. + +#+cindex: boolean logic, for agenda searches +A search string can use Boolean operators =&= for AND and =|= for OR. +=&= binds more strongly than =|=. Parentheses are currently not +implemented. Each element in the search is either a tag, a regular +expression matching tags, or an expression like =PROPERTY OPERATOR +VALUE= with a comparison operator, accessing a property value. Each +element may be preceded by =-= to select against it, and =+= is +syntactic sugar for positive selection. The AND operator =&= is +optional when =+= or =-= is present. Here are some examples, using +only tags. + +- =+work-boss= :: + + Select headlines tagged =work=, but discard those also tagged + =boss=. + +- =work|laptop= :: + + Selects lines tagged =work= or =laptop=. + +- =work|laptop+night= :: + + Like before, but require the =laptop= lines to be tagged also + =night=. + +#+cindex: regular expressions, with tags search +Instead of a tag, you may also specify a regular expression enclosed +in curly braces (see [[*Regular Expressions]]). For example, +=work+{^boss.*}= matches headlines that contain the tag =:work:= and +any tag /starting/ with =boss=. + +#+cindex: group tags, as regular expressions +Group tags (see [[*Tag Hierarchy]]) are expanded as regular expressions. +E.g., if =work= is a group tag for the group =:work:lab:conf:=, then +searching for =work= also searches for ={\(?:work\|lab\|conf\)}= and +searching for =-work= searches for all headlines but those with one of +the tags in the group (i.e., =-{\(?:work\|lab\|conf\)}=). + +#+cindex: TODO keyword matching, with tags search +#+cindex: level, for tags/property match +#+cindex: category, for tags/property match +#+vindex: org-odd-levels-only +You may also test for properties (see [[*Properties and Columns]]) at the +same time as matching tags. The properties may be real properties, or +special properties that represent other metadata (see [[*Special +Properties]]). For example, the property =TODO= represents the TODO +keyword of the entry. Or, the property =LEVEL= represents the level +of an entry. So searching =+LEVEL=3+boss-TODO​="DONE"= lists all level +three headlines that have the tag =boss= and are /not/ marked with the +TODO keyword =DONE=. In buffers with ~org-odd-levels-only~ set, +=LEVEL= does not count the number of stars, but =LEVEL=2= corresponds +to 3 stars etc. + +Here are more examples: + +- =work+TODO​="WAITING"= :: + + Select =work=-tagged TODO lines with the specific TODO keyword + =WAITING=. + +- =work+TODO​="WAITING"|home+TODO​="WAITING"= :: + + Waiting tasks both at work and at home. + +When matching properties, a number of different operators can be used +to test the value of a property. Here is a complex example: + +#+begin_example ++work-boss+PRIORITY="A"+Coffee="unlimited"+Effort<2 + +With={Sarah\|Denny}+SCHEDULED>="<2008-10-11>" +#+end_example + +#+texinfo: @noindent +The type of comparison depends on how the comparison value is written: + +- If the comparison value is a plain number, a numerical comparison is + done, and the allowed operators are =<=, ===, =>=, =<==, =>==, and + =<>=. + +- If the comparison value is enclosed in double-quotes, a string + comparison is done, and the same operators are allowed. + +- If the comparison value is enclosed in double-quotes /and/ angular + brackets (like =DEADLINE<​="<2008-12-24 18:30>"=), both values are + assumed to be date/time specifications in the standard Org way, and + the comparison is done accordingly. Valid values also include + =""= for now (including time), =""=, and =""= + for these days at 0:00 hours, i.e., without a time specification. + You can also use strings like ="<+5d>"= or ="<-2m>"= with units =d=, + =w=, =m=, and =y= for day, week, month, and year, respectively. + +- If the comparison value is enclosed in curly braces, a regexp match + is performed, with === meaning that the regexp matches the property + value, and =<>= meaning that it does not match. + +So the search string in the example finds entries tagged =work= but +not =boss=, which also have a priority value =A=, a =Coffee= property +with the value =unlimited=, an =EFFORT= property that is numerically +smaller than 2, a =With= property that is matched by the regular +expression =Sarah\|Denny=, and that are scheduled on or after October +11, 2008. + +You can configure Org mode to use property inheritance during +a search, but beware that this can slow down searches considerably. +See [[*Property Inheritance]], for details. + +For backward compatibility, and also for typing speed, there is also +a different way to test TODO states in a search. For this, terminate +the tags/property part of the search string (which may include several +terms connected with =|=) with a =/= and then specify a Boolean +expression just for TODO keywords. The syntax is then similar to that +for tags, but should be applied with care: for example, a positive +selection on several TODO keywords cannot meaningfully be combined +with boolean AND. However, /negative selection/ combined with AND can +be meaningful. To make sure that only lines are checked that actually +have any TODO keyword (resulting in a speed-up), use {{{kbd(M-x +org-agenda M)}}}, or equivalently start the TODO part after the slash +with =!=. Using {{{kbd(M-x org-agenda M)}}} or =/!= does not match +TODO keywords in a DONE state. Examples: + +- =work/WAITING= :: + + Same as =work+TODO​="WAITING"=. + +- =work/!-WAITING-NEXT= :: + + Select =work=-tagged TODO lines that are neither =WAITING= nor + =NEXT=. + +- =work/!+WAITING|+NEXT= :: + + Select =work=-tagged TODO lines that are either =WAITING= or =NEXT=. + +*** Search view +:PROPERTIES: +:DESCRIPTION: Find entries by searching for text. +:END: +#+cindex: search view +#+cindex: text search +#+cindex: searching, for text + +This agenda view is a general text search facility for Org mode +entries. It is particularly useful to find notes. + +- {{{kbd(M-x org-agenda s)}}} (~org-search-view~) :: + + #+kindex: s @r{(Agenda dispatcher)} + #+findex: org-search-view + This is a special search that lets you select entries by matching + a substring or specific words using a boolean logic. + +For example, the search string =computer equipment= matches entries +that contain =computer equipment= as a substring, even if the two +words are separated by more space or a line break. + +Search view can also search for specific keywords in the entry, using +Boolean logic. The search string =+computer ++wifi -ethernet -{8\.11[bg]}= matches note entries that contain the +keywords =computer= and =wifi=, but not the keyword =ethernet=, and +which are also not matched by the regular expression =8\.11[bg]=, +meaning to exclude both =8.11b= and =8.11g=. The first =+= is +necessary to turn on boolean search, other =+= characters are +optional. For more details, see the docstring of the command +~org-search-view~. + +You can incrementally and conveniently adjust a boolean search from +the agenda search view with the following keys + +#+attr_texinfo: :columns 0.1 0.6 +| {{{kbd([)}}} | Add a positive search word | +| {{{kbd(])}}} | Add a negative search word | +| {{{kbd({)}}} | Add a positive regular expression | +| {{{kbd(})}}} | Add a negative regular expression | + +#+vindex: org-agenda-text-search-extra-files +Note that in addition to the agenda files, this command also searches +the files listed in ~org-agenda-text-search-extra-files~. + +*** Stuck projects +:PROPERTIES: +:DESCRIPTION: Find projects you need to review. +:END: +#+pindex: GTD, Getting Things Done + +If you are following a system like David Allen's GTD to organize your +work, one of the "duties" you have is a regular review to make sure +that all projects move along. A /stuck/ project is a project that has +no defined next actions, so it never shows up in the TODO lists Org +mode produces. During the review, you need to identify such projects +and define next actions for them. + +- {{{kbd(M-x org-agenda #)}}} (~org-agenda-list-stuck-projects~) :: + + #+kindex: # @r{(Agenda dispatcher)} + #+findex: org-agenda-list-stuck-projects + List projects that are stuck. + +- {{{kbd(M-x org-agenda !)}}} :: + + #+kindex: ! @r{(Agenda dispatcher)} + #+vindex: org-stuck-projects + Customize the variable ~org-stuck-projects~ to define what a stuck + project is and how to find it. + +You almost certainly need to configure this view before it works for +you. The built-in default assumes that all your projects are level-2 +headlines, and that a project is not stuck if it has at least one +entry marked with a TODO keyword =TODO= or =NEXT= or =NEXTACTION=. + +Let's assume that you, in your own way of using Org mode, identify +projects with a tag =:PROJECT:=, and that you use a TODO keyword +=MAYBE= to indicate a project that should not be considered yet. +Let's further assume that the TODO keyword =DONE= marks finished +projects, and that =NEXT= and =TODO= indicate next actions. The tag +=:@shop:= indicates shopping and is a next action even without the +NEXT tag. Finally, if the project contains the special word =IGNORE= +anywhere, it should not be listed either. In this case you would +start by identifying eligible projects with a tags/TODO match (see +[[*Tag Searches]]) =+PROJECT/-MAYBE-DONE=, and then check for =TODO=, +=NEXT=, =@shop=, and =IGNORE= in the subtree to identify projects that +are not stuck. The correct customization for this is: + +#+begin_src emacs-lisp +(setq org-stuck-projects + '("+PROJECT/-MAYBE-DONE" ("NEXT" "TODO") ("@shop") + "\\")) +#+end_src + +Note that if a project is identified as non-stuck, the subtree of this +entry is searched for stuck projects. + +** Presentation and Sorting +:PROPERTIES: +:DESCRIPTION: How agenda items are prepared for display. +:END: +#+cindex: presentation, of agenda items + +#+vindex: org-agenda-prefix-format +#+vindex: org-agenda-tags-column +Before displaying items in an agenda view, Org mode visually prepares +the items and sorts them. Each item occupies a single line. The line +starts with a /prefix/ that contains the /category/ (see [[*Categories]]) +of the item and other important information. You can customize in +which column tags are displayed through ~org-agenda-tags-column~. You +can also customize the prefix using the option +~org-agenda-prefix-format~. This prefix is followed by a cleaned-up +version of the outline headline associated with the item. + +*** Categories +:PROPERTIES: +:DESCRIPTION: Not all tasks are equal. +:END: +#+cindex: category +#+cindex: @samp{CATEGORY}, keyword + +The category is a broad label assigned to each agenda item. By +default, the category is simply derived from the file name, but you +can also specify it with a special line in the buffer, like +this: + +: #+CATEGORY: Thesis + +#+cindex: @samp{CATEGORY}, property +If you would like to have a special category for a single entry or +a (sub)tree, give the entry a =CATEGORY= property with the special +category you want to apply as the value. + +#+vindex: org-agenda-category-icon-alist +The display in the agenda buffer looks best if the category is not +longer than 10 characters. You can set up icons for category by +customizing the ~org-agenda-category-icon-alist~ variable. + +*** Time-of-day specifications +:PROPERTIES: +:DESCRIPTION: How the agenda knows the time. +:END: +#+cindex: time-of-day specification + +Org mode checks each agenda item for a time-of-day specification. The +time can be part of the timestamp that triggered inclusion into the +agenda, for example + +: <2005-05-10 Tue 19:00> + +#+texinfo: @noindent +Time ranges can be specified with two timestamps: + +: <2005-05-10 Tue 20:30>--<2005-05-10 Tue 22:15> + +#+vindex: org-agenda-search-headline-for-time +In the headline of the entry itself, a time(range)---like =12:45= or +a =8:30-1pm=---may also appear as plain text[fn:97]. + +If the agenda integrates the Emacs diary (see [[*Weekly/daily agenda]]), +time specifications in diary entries are recognized as well. + +For agenda display, Org mode extracts the time and displays it in +a standard 24 hour format as part of the prefix. The example times in +the previous paragraphs would end up in the agenda like this: + +#+begin_example + 8:30-13:00 Arthur Dent lies in front of the bulldozer +12:45...... Ford Prefect arrives and takes Arthur to the pub +19:00...... The Vogon reads his poem +20:30-22:15 Marvin escorts the Hitchhikers to the bridge +#+end_example + +#+cindex: time grid +If the agenda is in single-day mode, or for the display of today, the +timed entries are embedded in a time grid, like + +#+begin_example + 8:00...... ------------------ + 8:30-13:00 Arthur Dent lies in front of the bulldozer +10:00...... ------------------ +12:00...... ------------------ +12:45...... Ford Prefect arrives and takes Arthur to the pub +14:00...... ------------------ +16:00...... ------------------ +18:00...... ------------------ +19:00...... The Vogon reads his poem +20:00...... ------------------ +20:30-22:15 Marvin escorts the Hitchhikers to the bridge +#+end_example + +#+vindex: org-agenda-use-time-grid +#+vindex: org-agenda-time-grid +The time grid can be turned on and off with the variable +~org-agenda-use-time-grid~, and can be configured with +~org-agenda-time-grid~. + +*** Sorting of agenda items +:PROPERTIES: +:DESCRIPTION: The order of things. +:END: +#+cindex: sorting, of agenda items +#+cindex: priorities, of agenda items + +Before being inserted into a view, the items are sorted. How this is +done depends on the type of view. + +- + #+vindex: org-agenda-files + For the daily/weekly agenda, the items for each day are sorted. The + default order is to first collect all items containing an explicit + time-of-day specification. These entries are shown at the beginning + of the list, as a /schedule/ for the day. After that, items remain + grouped in categories, in the sequence given by ~org-agenda-files~. + Within each category, items are sorted by priority (see + [[*Priorities]]), which is composed of the base priority (2000 for + priority =A=, 1000 for =B=, and 0 for =C=), plus additional + increments for overdue scheduled or deadline items. + +- For the TODO list, items remain in the order of categories, but + within each category, sorting takes place according to priority (see + [[*Priorities]]). The priority used for sorting derives from the + priority cookie, with additions depending on how close an item is to + its due or scheduled date. + +- For tags matches, items are not sorted at all, but just appear in + the sequence in which they are found in the agenda files. + +#+vindex: org-agenda-sorting-strategy +Sorting can be customized using the variable +~org-agenda-sorting-strategy~, and may also include criteria based on +the estimated effort of an entry (see [[*Effort Estimates]]). + +*** Filtering/limiting agenda items +:PROPERTIES: +:DESCRIPTION: Dynamically narrow the agenda. +:END: + +#+vindex: org-agenda-category-filter-preset +#+vindex: org-agenda-tag-filter-preset +#+vindex: org-agenda-effort-filter-preset +#+vindex: org-agenda-regexp-filter-preset +Agenda built-in or custom commands are statically defined. Agenda +filters and limits allow to flexibly narrow down the list of agenda +entries. + +/Filters/ only change the visibility of items, are very fast and are +mostly used interactively[fn:98]. You can switch quickly between +different filters without having to recreate the agenda. /Limits/ on +the other hand take effect before the agenda buffer is populated, so +they are mostly useful when defined as local variables within custom +agenda commands. + +**** Filtering in the agenda +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: agenda filtering +#+cindex: filtering entries, in agenda +#+cindex: tag filtering, in agenda +#+cindex: category filtering, in agenda +#+cindex: top headline filtering, in agenda +#+cindex: effort filtering, in agenda +#+cindex: query editing, in agenda + +The general filtering command is ~org-agenda-filter~, bound to +{{{kbd(/)}}}. Before we introduce it, we describe commands for +individual filter types. All filtering commands handle prefix +arguments in the same way: A single {{{kbd(C-u)}}} prefix negates the +filter, so it removes lines selected by the filter. A double prefix +adds the new filter condition to the one(s) already in place, so +filter elements are accumulated. + +- {{{kbd(\)}}} (~org-agenda-filter-by-tag~) :: + + #+findex: org-agenda-filter-by-tag + Filter the agenda view with respect to a tag. You are prompted for + a tag selection letter; {{{kbd(SPC)}}} means any tag at all. + Pressing {{{kbd(TAB)}}} at that prompt offers completion to select a + tag, including any tags that do not have a selection character. The + command then hides all entries that do not contain or inherit this + tag. Pressing {{{kbd(+)}}} or {{{kbd(-)}}} at the prompt switches + between filtering for and against the next tag. To clear the + filter, press {{{kbd(\)}}} twice (once to call the command again, + and once at the prompt). + +- {{{kbd(<)}}} (~org-agenda-filter-by-category~) :: + + #+findex: org-agenda-filter-by-category + Filter by category of the line at point, and show only entries with + this category. When called with a prefix argument, hide all entries + with the category at point. To clear the filter, call this command + again by pressing {{{kbd(<)}}}. + +- {{{kbd(=)}}} (~org-agenda-filter-by-regexp~) :: + + #+findex: org-agenda-filter-by-regexp + Filter the agenda view by a regular expression: only show agenda + entries matching the regular expression the user entered. To clear + the filter, call the command again by pressing {{{kbd(=)}}}. + +- {{{kbd(_)}}} (~org-agenda-filter-by-effort~) :: + + #+findex: org-agenda-filter-by-effort + Filter the agenda view with respect to effort estimates, so select + tasks that take the right amount of time. You first need to set up + a list of efforts globally, for example + + #+begin_src emacs-lisp + (setq org-global-properties + '(("Effort_ALL". "0 0:10 0:30 1:00 2:00 3:00 4:00"))) + #+end_src + + #+vindex: org-sort-agenda-noeffort-is-high + You can then filter for an effort by first typing an operator, one + of {{{kbd(<)}}}, {{{kbd(>)}}} and {{{kbd(=)}}}, and then the + one-digit index of an effort estimate in your array of allowed + values, where {{{kbd(0)}}} means the 10th value. The filter then + restricts to entries with effort smaller-or-equal, equal, or + larger-or-equal than the selected value. For application of the + operator, entries without a defined effort are treated according to + the value of ~org-sort-agenda-noeffort-is-high~. To clear the + filter, press {{{kbd(_)}}} twice (once to call the command again, + and once at the first prompt). + +- {{{kbd(^)}}} (~org-agenda-filter-by-top-headline~) :: + + #+findex: org-agenda-filter-by-top-headline + Filter the current agenda view and only display items that fall + under the same top-level headline as the current entry. To clear + the filter, call this command again by pressing {{{kbd(^)}}}. + +- {{{kbd(/)}}} (~org-agenda-filter~) :: + + #+findex: org-agenda-filter + This is the unified interface to four of the five filter methods + described above. At the prompt, specify different filter elements + in a single string, with full completion support. For example, + + : +work-John+<0:10-/plot/ + + selects entries with category =work= and effort estimates below 10 + minutes, and deselects entries with tag =John= or matching the + regexp =plot= (see [[*Regular Expressions]]). You can leave =+= out if + that does not lead to ambiguities. The sequence of elements is + arbitrary. The filter syntax assumes that there is no overlap + between categories and tags. Otherwise, tags take priority. If you + reply to the prompt with the empty string, all filtering is removed. + If a filter is specified, it replaces all current filters. But if + you call the command with a double prefix argument, or if you add an + additional =+= (e.g., =++work=) to the front of the string, the new + filter elements are added to the active ones. A single prefix + argument applies the entire filter in a negative sense. + +- {{{kbd(|)}}} (~org-agenda-filter-remove-all~) :: + + Remove all filters in the current agenda view. + +**** Computed tag filtering +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+vindex: org-agenda-auto-exclude-function +If the variable ~org-agenda-auto-exclude-function~ is set to +a user-defined function, that function can select tags that should be +used as a tag filter when requested. The function will be called with +lower-case versions of all tags represented in the current view. The +function should return ="-tag"= if the filter should remove +entries with that tag, ="+tag"= if only entries with this tag should +be kept, or =nil= if that tag is irrelevant. For example, let's say +you use a =Net= tag to identify tasks which need network access, an +=Errand= tag for errands in town, and a =Call= tag for making phone +calls. You could auto-exclude these tags based on the availability of +the Internet, and outside of business hours, with something like this: + +#+begin_src emacs-lisp +(defun my-auto-exclude-fn (tag) + (when (cond ((string= tag "net") + (/= 0 (call-process "/sbin/ping" nil nil nil + "-c1" "-q" "-t1" "mail.gnu.org"))) + ((member tag '("errand" "call")) + (let ((hr (nth 2 (decode-time)))) + (or (< hr 8) (> hr 21))))) + (concat "-" tag))) + +(setq org-agenda-auto-exclude-function #'my-auto-exclude-fn) +#+end_src + +You can apply this self-adapting filter by using a triple prefix +argument to ~org-agenda-filter~, i.e.\nbsp{}press {{{kbd(C-u C-u C-u /)}}}, +or by pressing {{{kbd(RET)}}} in ~org-agenda-filter-by-tag~. + +**** Setting limits for the agenda +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: limits, in agenda + +Here is a list of options that you can set, either globally, or +locally in your custom agenda views (see [[*Custom Agenda Views]]). + +- ~org-agenda-max-entries~ :: + + #+vindex: org-agenda-max-entries + Limit the number of entries. + +- ~org-agenda-max-effort~ :: + + #+vindex: org-agenda-max-effort + Limit the duration of accumulated efforts (as minutes). + +- ~org-agenda-max-todos~ :: + + #+vindex: org-agenda-max-todos + Limit the number of entries with TODO keywords. + +- ~org-agenda-max-tags~ :: + + #+vindex: org-agenda-max-tags + Limit the number of tagged entries. + +When set to a positive integer, each option excludes entries from +other categories: for example, =(setq org-agenda-max-effort 100)= +limits the agenda to 100 minutes of effort and exclude any entry that +has no effort property. If you want to include entries with no effort +property, use a negative value for ~org-agenda-max-effort~. One +useful setup is to use ~org-agenda-max-entries~ locally in a custom +command. For example, this custom command displays the next five +entries with a =NEXT= TODO keyword. + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("n" todo "NEXT" + ((org-agenda-max-entries 5))))) +#+end_src + +Once you mark one of these five entry as DONE, rebuilding the agenda +will again the next five entries again, including the first entry that +was excluded so far. + +You can also dynamically set temporary limits, which are lost when +rebuilding the agenda: + +- {{{kbd(~ )}}} (~org-agenda-limit-interactively~) :: + + #+findex: org-agenda-limit-interactively + This prompts for the type of limit to apply and its value. + +** Commands in the Agenda Buffer +:PROPERTIES: +:DESCRIPTION: Remote editing of Org trees. +:ALT_TITLE: Agenda Commands +:END: +#+cindex: commands, in agenda buffer + +Entries in the agenda buffer are linked back to the Org file or diary +file where they originate. You are not allowed to edit the agenda +buffer itself, but commands are provided to show and jump to the +original entry location, and to edit the Org files "remotely" from the +agenda buffer. In this way, all information is stored only once, +removing the risk that your agenda and note files may diverge. + +Some commands can be executed with mouse clicks on agenda lines. For +the other commands, point needs to be in the desired line. + +*** Motion +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: motion commands in agenda + +- {{{kbd(n)}}} (~org-agenda-next-line~) :: + + #+kindex: n + #+findex: org-agenda-next-line + Next line (same as {{{kbd(DOWN)}}} and {{{kbd(C-n)}}}). + +- {{{kbd(p)}}} (~org-agenda-previous-line~) :: + + #+kindex: p + #+findex: org-agenda-previous-line + Previous line (same as {{{kbd(UP)}}} and {{{kbd(C-p)}}}). + +*** View/Go to Org file +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: view file commands in agenda + +- {{{kbd(SPC)}}} or {{{kbd(mouse-3)}}} (~org-agenda-show-and-scroll-up~) :: + + #+kindex: SPC + #+kindex: mouse-3 + #+findex: org-agenda-show-and-scroll-up + Display the original location of the item in another window. + With a prefix argument, make sure that drawers stay folded. + +- {{{kbd(L)}}} (~org-agenda-recenter~) :: + + #+findex: org-agenda-recenter + Display original location and recenter that window. + +- {{{kbd(TAB)}}} or {{{kbd(mouse-2)}}} (~org-agenda-goto~) :: + + #+kindex: TAB + #+kindex: mouse-2 + #+findex: org-agenda-goto + Go to the original location of the item in another window. + +- {{{kbd(RET)}}} (~org-agenda-switch-to~) :: + + #+kindex: RET + #+findex: org-agenda-switch-to + Go to the original location of the item and delete other windows. + +- {{{kbd(F)}}} (~org-agenda-follow-mode~) :: + + #+kindex: F + #+findex: org-agenda-follow-mode + #+vindex: org-agenda-start-with-follow-mode + Toggle Follow mode. In Follow mode, as you move point through the + agenda buffer, the other window always shows the corresponding + location in the Org file. The initial setting for this mode in new + agenda buffers can be set with the variable + ~org-agenda-start-with-follow-mode~. + +- {{{kbd(C-c C-x b)}}} (~org-agenda-tree-to-indirect-buffer~) :: + + #+kindex: C-c C-x b + #+findex: org-agenda-tree-to-indirect-buffer + Display the entire subtree of the current item in an indirect + buffer. With a numeric prefix argument N, go up to level N and then + take that tree. If N is negative, go up that many levels. With + a {{{kbd(C-u)}}} prefix, do not remove the previously used indirect + buffer. + +- {{{kbd(C-c C-o)}}} (~org-agenda-open-link~) :: + + #+kindex: C-c C-o + #+findex: org-agenda-open-link + Follow a link in the entry. This offers a selection of any links in + the text belonging to the referenced Org node. If there is only one + link, follow it without a selection prompt. + +*** Change display +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: change agenda display +#+cindex: display changing, in agenda + +#+attr_texinfo: :sep , +- {{{kbd(A)}}} :: + + #+kindex: A + Interactively select another agenda view and append it to the + current view. + +- {{{kbd(o)}}} :: + + #+kindex: o + Delete other windows. + +- {{{kbd(v d)}}} or short {{{kbd(d)}}} (~org-agenda-day-view~) :: + + #+kindex: v d + #+kindex: d + #+findex: org-agenda-day-view + Switch to day view. When switching to day view, this setting + becomes the default for subsequent agenda refreshes. A numeric + prefix argument may be used to jump directly to a specific day of + the year. For example, {{{kbd(32 d)}}} jumps to February 1st. When + setting day view, a year may be encoded in the prefix argument as + well. For example, {{{kbd(200712 d)}}} jumps to January 12, 2007. + If such a year specification has only one or two digits, it is + expanded into one of the 30 next years or the last 69 years. + +- {{{kbd(v w)}}} or short {{{kbd(w)}}} (~org-agenda-week-view~) :: + + #+kindex: v w + #+kindex: w + #+findex: org-agenda-week-view + Switch to week view. When switching week view, this setting becomes + the default for subsequent agenda refreshes. A numeric prefix + argument may be used to jump directly to a specific day of the ISO + week. For example {{{kbd(9 w)}}} to ISO week number 9. When + setting week view, a year may be encoded in the prefix argument as + well. For example, {{{kbd(200712 w)}}} jumps to week 12 in 2007. + If such a year specification has only one or two digits, it is + expanded into one of the 30 next years or the last 69 years. + +- {{{kbd(v m)}}} (~org-agenda-month-view~) :: + + #+kindex: v m + #+findex: org-agenda-month-view + Switch to month view. Because month views are slow to create, they + do not become the default for subsequent agenda refreshes. + A numeric prefix argument may be used to jump directly to a specific + day of the month. When setting month view, a year may be encoded in + the prefix argument as well. For example, {{{kbd(200712 m)}}} jumps + to December, 2007. If such a year specification has only one or two + digits, it is expanded into one of the 30 next years or the last 69 + years. + +- {{{kbd(v y)}}} (~org-agenda-year-view~) :: + + #+kindex: v y + #+findex: org-agenda-year-view + Switch to year view. Because year views are slow to create, they do + not become the default for subsequent agenda refreshes. A numeric + prefix argument may be used to jump directly to a specific day of + the year. + +- {{{kbd(v SPC)}}} (~org-agenda-reset-view~) :: + + #+kindex: v SPC + #+findex: org-agenda-reset-view + #+vindex: org-agenda-span + Reset the current view to ~org-agenda-span~. + +- {{{kbd(f)}}} (~org-agenda-later~) :: + + #+kindex: f + #+findex: org-agenda-later + Go forward in time to display the span following the current one. + For example, if the display covers a week, switch to the following + week. With a prefix argument, repeat that many times. + +- {{{kbd(b)}}} (~org-agenda-earlier~) :: + + #+kindex: b + #+findex: org-agenda-earlier + Go backward in time to display earlier dates. + +- {{{kbd(.)}}} (~org-agenda-goto-today~) :: + + #+kindex: . + #+findex: org-agenda-goto-today + Go to today. + +- {{{kbd(j)}}} (~org-agenda-goto-date~) :: + + #+kindex: j + #+findex: org-agenda-goto-date + Prompt for a date and go there. + +- {{{kbd(J)}}} (~org-agenda-clock-goto~) :: + + #+kindex: J + #+findex: org-agenda-clock-goto + Go to the currently clocked-in task /in the agenda buffer/. + +- {{{kbd(D)}}} (~org-agenda-toggle-diary~) :: + + #+kindex: D + #+findex: org-agenda-toggle-diary + Toggle the inclusion of diary entries. See [[*Weekly/daily agenda]]. + +- {{{kbd(v l)}}} or {{{kbd(v L)}}} or short {{{kbd(l)}}} (~org-agenda-log-mode~) :: + + #+kindex: v l + #+kindex: l + #+kindex: v L + #+findex: org-agenda-log-mode + #+vindex: org-log-done + #+vindex: org-agenda-log-mode-items + Toggle Logbook mode. In Logbook mode, entries that were marked as + done while logging was on (see the variable ~org-log-done~) are + shown in the agenda, as are entries that have been clocked on that + day. You can configure the entry types that should be included in + log mode using the variable ~org-agenda-log-mode-items~. When + called with a {{{kbd(C-u)}}} prefix argument, show all possible + logbook entries, including state changes. When called with two + prefix arguments {{{kbd(C-u C-u)}}}, show only logging information, + nothing else. {{{kbd(v L)}}} is equivalent to {{{kbd(C-u v l)}}}. + +- {{{kbd(v [)}}} or short {{{kbd([)}}} (~org-agenda-manipulate-query-add~) :: + + #+kindex: v [ + #+kindex: [ + #+findex: org-agenda-manipulate-query-add + Include inactive timestamps into the current view. Only for + weekly/daily agenda. + +- {{{kbd(v a)}}} (~org-agenda-archives-mode~) :: + + #+kindex: v a + #+findex: org-agenda-archives-mode + Toggle Archives mode. In Archives mode, trees that are archived + (see [[*Internal archiving]]) are also scanned when producing the + agenda. To exit archives mode, press {{{kbd(v a)}}} again. + +- {{{kbd(v A)}}} :: + + #+kindex: v A + Toggle Archives mode. Include all archive files as well. + +- {{{kbd(v R)}}} or short {{{kbd(R)}}} (~org-agenda-clockreport-mode~) :: + + #+kindex: v R + #+kindex: R + #+findex: org-agenda-clockreport-mode + #+vindex: org-agenda-start-with-clockreport-mode + #+vindex: org-clock-report-include-clocking-task + Toggle Clockreport mode. In Clockreport mode, the daily/weekly + agenda always shows a table with the clocked times for the time span + and file scope covered by the current agenda view. The initial + setting for this mode in new agenda buffers can be set with the + variable ~org-agenda-start-with-clockreport-mode~. By using + a prefix argument when toggling this mode (i.e., {{{kbd(C-u R)}}}), + the clock table does not show contributions from entries that are + hidden by agenda filtering[fn:99]. See also the variable + ~org-clock-report-include-clocking-task~. + +- {{{kbd(v c)}}} :: + + #+kindex: v c + #+vindex: org-agenda-clock-consistency-checks + Show overlapping clock entries, clocking gaps, and other clocking + problems in the current agenda range. You can then visit clocking + lines and fix them manually. See the variable + ~org-agenda-clock-consistency-checks~ for information on how to + customize the definition of what constituted a clocking problem. To + return to normal agenda display, press {{{kbd(l)}}} to exit Logbook + mode. + +- {{{kbd(v E)}}} or short {{{kbd(E)}}} (~org-agenda-entry-text-mode~) :: + + #+kindex: v E + #+kindex: E + #+findex: org-agenda-entry-text-mode + #+vindex: org-agenda-start-with-entry-text-mode + #+vindex: org-agenda-entry-text-maxlines + Toggle entry text mode. In entry text mode, a number of lines from + the Org outline node referenced by an agenda line are displayed + below the line. The maximum number of lines is given by the + variable ~org-agenda-entry-text-maxlines~. Calling this command + with a numeric prefix argument temporarily modifies that number to + the prefix value. + +- {{{kbd(G)}}} (~org-agenda-toggle-time-grid~) :: + + #+kindex: G + #+vindex: org-agenda-use-time-grid + #+vindex: org-agenda-time-grid + Toggle the time grid on and off. See also the variables + ~org-agenda-use-time-grid~ and ~org-agenda-time-grid~. + +- {{{kbd(r)}}} (~org-agenda-redo~), {{{kbd(g)}}} :: + + #+kindex: r + #+kindex: g + #+findex: org-agenda-redo + Recreate the agenda buffer, for example to reflect the changes after + modification of the timestamps of items with {{{kbd(S-LEFT)}}} and + {{{kbd(S-RIGHT)}}}. When the buffer is the global TODO list, + a prefix argument is interpreted to create a selective list for + a specific TODO keyword. + +- {{{kbd(C-x C-s)}}} or short {{{kbd(s)}}} (~org-save-all-org-buffers~) :: + + #+kindex: C-x C-s + #+findex: org-save-all-org-buffers + #+kindex: s + Save all Org buffers in the current Emacs session, and also the + locations of IDs. + +- {{{kbd(C-c C-x C-c)}}} (~org-agenda-columns~) :: + + #+kindex: C-c C-x C-c + #+findex: org-agenda-columns + #+vindex: org-columns-default-format + Invoke column view (see [[*Column View]]) in the agenda buffer. The + column view format is taken from the entry at point, or, if there is + no entry at point, from the first entry in the agenda view. So + whatever the format for that entry would be in the original buffer + (taken from a property, from a =COLUMNS= keyword, or from the + default variable ~org-columns-default-format~) is used in the + agenda. + +- {{{kbd(C-c C-x >)}}} (~org-agenda-remove-restriction-lock~) :: + + #+kindex: C-c C-x > + #+findex: org-agenda-remove-restriction-lock + Remove the restriction lock on the agenda, if it is currently + restricted to a file or subtree (see [[*Agenda Files]]). + +- {{{kbd(M-UP)}}} (~org-agenda-drag-line-backward~) :: + + #+kindex: M-UP + #+findex: org-agenda-drag-line-backward + Drag the line at point backward one line. With a numeric prefix + argument, drag backward by that many lines. + + Moving agenda lines does not persist after an agenda refresh and + does not modify the contributing Org files. + +- {{{kbd(M-DOWN)}}} (~org-agenda-drag-line-forward~) :: + + #+kindex: M-DOWN + #+findex: org-agenda-drag-line-forward + Drag the line at point forward one line. With a numeric prefix + argument, drag forward by that many lines. + +*** Remote editing +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: remote editing, from agenda + +- {{{kbd(0--9)}}} :: + + Digit argument. + +- {{{kbd(C-_)}}} (~org-agenda-undo~) :: + + #+kindex: C-_ + #+findex: org-agenda-undo + #+cindex: undoing remote-editing events + #+cindex: remote editing, undo + Undo a change due to a remote editing command. The change is undone + both in the agenda buffer and in the remote buffer. + +- {{{kbd(t)}}} (~org-agenda-todo~) :: + + #+kindex: t + #+findex: org-agenda-todo + Change the TODO state of the item, both in the agenda and in the + original Org file. A prefix arg is passed through to the ~org-todo~ + command, so for example a {{{kbd(C-u)}}} prefix are will trigger + taking a note to document the state change. + +- {{{kbd(C-S-RIGHT)}}} (~org-agenda-todo-nextset~) :: + + #+kindex: C-S-RIGHT + #+findex: org-agenda-todo-nextset + Switch to the next set of TODO keywords. + +- {{{kbd(C-S-LEFT)}}}, ~org-agenda-todo-previousset~ :: + + #+kindex: C-S-LEFT + Switch to the previous set of TODO keywords. + +- {{{kbd(C-k)}}} (~org-agenda-kill~) :: + + #+kindex: C-k + #+findex: org-agenda-kill + #+vindex: org-agenda-confirm-kill + Delete the current agenda item along with the entire subtree + belonging to it in the original Org file. If the text to be deleted + remotely is longer than one line, the kill needs to be confirmed by + the user. See variable ~org-agenda-confirm-kill~. + +- {{{kbd(C-c C-w)}}} (~org-agenda-refile~) :: + + #+kindex: C-c C-w + #+findex: org-agenda-refile + Refile the entry at point. + +- {{{kbd(C-c C-x C-a)}}} or short {{{kbd(a)}}} (~org-agenda-archive-default-with-confirmation~) :: + + #+kindex: C-c C-x C-a + #+kindex: a + #+findex: org-agenda-archive-default-with-confirmation + #+vindex: org-archive-default-command + Archive the subtree corresponding to the entry at point using the + default archiving command set in ~org-archive-default-command~. + When using the {{{kbd(a)}}} key, confirmation is required. + +- {{{kbd(C-c C-x a)}}} (~org-agenda-toggle-archive-tag~) :: + + #+kindex: C-c C-x a + #+findex: org-agenda-toggle-archive-tag + Toggle the archive tag (see [[*Internal archiving]]) for the current + headline. + +- {{{kbd(C-c C-x A)}}} (~org-agenda-archive-to-archive-sibling~) :: + + #+kindex: C-c C-x A + #+findex: org-agenda-archive-to-archive-sibling + Move the subtree corresponding to the current entry to its /archive + sibling/. + +- {{{kbd(C-c C-x C-s)}}} or short {{{kbd($)}}} (~org-agenda-archive~) :: + + #+kindex: C-c C-x C-s + #+kindex: $ + #+findex: org-agenda-archive + Archive the subtree corresponding to the current headline. This + means the entry is moved to the configured archive location, most + likely a different file. + +- {{{kbd(T)}}} (~org-agenda-show-tags~) :: + + #+kindex: T + #+findex: org-agenda-show-tags + #+vindex: org-agenda-show-inherited-tags + Show all tags associated with the current item. This is useful if + you have turned off ~org-agenda-show-inherited-tags~, but still want + to see all tags of a headline occasionally. + +- {{{kbd(:)}}} (~org-agenda-set-tags~) :: + + #+kindex: : + #+findex: org-agenda-set-tags + Set tags for the current headline. If there is an active region in + the agenda, change a tag for all headings in the region. + +- {{{kbd(\,)}}} (~org-agenda-priority~) :: + + #+kindex: , + #+findex: org-agenda-priority + Set the priority for the current item. Org mode prompts for the + priority character. If you reply with {{{kbd(SPC)}}}, the priority + cookie is removed from the entry. + +- {{{kbd(+)}}} or {{{kbd(S-UP)}}} (~org-agenda-priority-up~) :: + + #+kindex: + + #+kindex: S-UP + #+findex: org-agenda-priority-up + Increase the priority of the current item. The priority is changed + in the original buffer, but the agenda is not resorted. Use the + {{{kbd(r)}}} key for this. + +- {{{kbd(-)}}} or {{{kbd(S-DOWN)}}} (~org-agenda-priority-down~) :: + + #+kindex: - + #+kindex: S-DOWN + #+findex: org-agenda-priority-down + Decrease the priority of the current item. + +- {{{kbd(C-c C-x e)}}} or short {{{kbd(e)}}} (~org-agenda-set-effort~) :: + + #+kindex: e + #+kindex: C-c C-x e + #+findex: org-agenda-set-effort + Set the effort property for the current item. + +- {{{kbd(C-c C-z)}}} or short {{{kbd(z)}}} (~org-agenda-add-note~) :: + + #+kindex: z + #+kindex: C-c C-z + #+findex: org-agenda-add-note + #+vindex: org-log-into-drawer + Add a note to the entry. This note is recorded, and then filed to + the same location where state change notes are put. Depending on + ~org-log-into-drawer~, this may be inside a drawer. + +- {{{kbd(C-c C-a)}}} (~org-attach~) :: + + #+kindex: C-c C-a + #+findex: org-attach + Dispatcher for all command related to attachments. + +- {{{kbd(C-c C-s)}}} (~org-agenda-schedule~) :: + + #+kindex: C-c C-s + #+findex: org-agenda-schedule + Schedule this item. With a prefix argument, remove the + scheduling timestamp + +- {{{kbd(C-c C-d)}}} (~org-agenda-deadline~) :: + + #+kindex: C-c C-d + #+findex: org-agenda-deadline + Set a deadline for this item. With a prefix argument, remove the + deadline. + +- {{{kbd(S-RIGHT)}}} (~org-agenda-do-date-later~) :: + + #+kindex: S-RIGHT + #+findex: org-agenda-do-date-later + Change the timestamp associated with the current line by one day + into the future. If the date is in the past, the first call to this + command moves it to today. With a numeric prefix argument, change + it by that many days. For example, {{{kbd(3 6 5 S-RIGHT)}}} changes + it by a year. With a {{{kbd(C-u)}}} prefix, change the time by one + hour. If you immediately repeat the command, it will continue to + change hours even without the prefix argument. With a double + {{{kbd(C-u C-u)}}} prefix, do the same for changing minutes. The + stamp is changed in the original Org file, but the change is not + directly reflected in the agenda buffer. Use {{{kbd(r)}}} or + {{{kbd(g)}}} to update the buffer. + +- {{{kbd(S-LEFT)}}} (~org-agenda-do-date-earlier~) :: + + #+kindex: S-LEFT + #+findex: org-agenda-do-date-earlier + Change the timestamp associated with the current line by one day + into the past. + +- {{{kbd(>)}}} (~org-agenda-date-prompt~) :: + + #+kindex: > + #+findex: org-agenda-date-prompt + Change the timestamp associated with the current line. The key + {{{kbd(>)}}} has been chosen, because it is the same as + {{{kbd(S-.)}}} on my keyboard. + +- {{{kbd(I)}}} (~org-agenda-clock-in~) :: + + #+kindex: I + #+findex: org-agenda-clock-in + Start the clock on the current item. If a clock is running already, + it is stopped first. + +- {{{kbd(O)}}} (~org-agenda-clock-out~) :: + + #+kindex: O + #+findex: org-agenda-clock-out + Stop the previously started clock. + +- {{{kbd(X)}}} (~org-agenda-clock-cancel~) :: + + #+kindex: X + #+findex: org-agenda-clock-cancel + Cancel the currently running clock. + +- {{{kbd(J)}}} (~org-agenda-clock-goto~) :: + + #+kindex: J + #+findex: org-agenda-clock-goto + Jump to the running clock in another window. + +- {{{kbd(k)}}} (~org-agenda-capture~) :: + + #+kindex: k + #+findex: org-agenda-capture + #+cindex: capturing, from agenda + #+vindex: org-capture-use-agenda-date + Like ~org-capture~, but use the date at point as the default date + for the capture template. See ~org-capture-use-agenda-date~ to make + this the default behavior of ~org-capture~. + +*** Bulk remote editing selected entries +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: remote editing, bulk, from agenda +#+vindex: org-agenda-bulk-custom-functions + +- {{{kbd(m)}}} (~org-agenda-bulk-mark~) :: + #+kindex: m + #+findex: org-agenda-bulk-mark + + Mark the entry at point for bulk action. If there is an active + region in the agenda, mark the entries in the region. With numeric + prefix argument, mark that many successive entries. + +- {{{kbd(*)}}} (~org-agenda-bulk-mark-all~) :: + #+kindex: * + #+findex: org-agenda-bulk-mark-all + + Mark all visible agenda entries for bulk action. + +- {{{kbd(u)}}} (~org-agenda-bulk-unmark~) :: + #+kindex: u + #+findex: org-agenda-bulk-unmark + + Unmark entry for bulk action. + +- {{{kbd(U)}}} (~org-agenda-bulk-remove-all-marks~) :: + #+kindex: U + #+findex: org-agenda-bulk-remove-all-marks + + Unmark all marked entries for bulk action. + +- {{{kbd(M-m)}}} (~org-agenda-bulk-toggle~) :: + #+kindex: M-m + #+findex: org-agenda-bulk-toggle + + Toggle mark of the entry at point for bulk action. + +- {{{kbd(M-*)}}} (~org-agenda-bulk-toggle-all~) :: + #+kindex: M-* + #+findex: org-agenda-bulk-toggle-all + + Toggle mark of every entry for bulk action. + +- {{{kbd(%)}}} (~org-agenda-bulk-mark-regexp~) :: + #+kindex: % + #+findex: org-agenda-bulk-mark-regexp + + Mark entries matching a regular expression for bulk action. + +- {{{kbd(B)}}} (~org-agenda-bulk-action~) :: + #+kindex: B + #+findex: org-agenda-bulk-action + #+vindex: org-agenda-bulk-persistent-marks + + Bulk action: act on all marked entries in the agenda. This prompts + for another key to select the action to be applied. The prefix + argument to {{{kbd(B)}}} is passed through to the {{{kbd(s)}}} and + {{{kbd(d)}}} commands, to bulk-remove these special timestamps. By + default, marks are removed after the bulk. If you want them to + persist, set ~org-agenda-bulk-persistent-marks~ to ~t~ or hit + {{{kbd(p)}}} at the prompt. + + - {{{kbd(p)}}} :: + + Toggle persistent marks. + + - {{{kbd($)}}} :: + + Archive all selected entries. + + - {{{kbd(A)}}} :: + + Archive entries by moving them to their respective archive + siblings. + + - {{{kbd(t)}}} :: + + Change TODO state. This prompts for a single TODO keyword and + changes the state of all selected entries, bypassing blocking and + suppressing logging notes---but not timestamps. + + - {{{kbd(+)}}} :: + + Add a tag to all selected entries. + + - {{{kbd(-)}}} :: + + Remove a tag from all selected entries. + + - {{{kbd(s)}}} :: + + Schedule all items to a new date. To shift existing schedule + dates by a fixed number of days, use something starting with + double plus at the prompt, for example =++8d= or =++2w=. + + - {{{kbd(d)}}} :: + + Set deadline to a specific date. + + - {{{kbd(r)}}} :: + + Prompt for a single refile target and move all entries. The + entries are no longer in the agenda; refresh ({{{kbd(g)}}}) to + bring them back. + + - {{{kbd(S)}}} :: + + Reschedule randomly into the coming N days. N is prompted for. + With a prefix argument ({{{kbd(C-u B S)}}}), scatter only across + weekdays. + + - {{{kbd(f)}}} :: + + #+vindex: org-agenda-bulk-custom-functions + Apply a function[fn:100] to marked entries. For example, the + function below sets the =CATEGORY= property of the entries to + =web=. + + #+begin_src emacs-lisp + (defun set-category () + (interactive "P") + (let ((marker (or (org-get-at-bol 'org-hd-marker) + (org-agenda-error)))) + (org-with-point-at marker + (org-back-to-heading t) + (org-set-property "CATEGORY" "web")))) + #+end_src + +*** Calendar commands +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: calendar commands, from agenda + +- {{{kbd(c)}}} (~org-agenda-goto-calendar~) :: + + #+kindex: c + #+findex: org-agenda-goto-calendar + Open the Emacs calendar and go to the date at point in the agenda. + +- {{{kbd(c)}}} (~org-calendar-goto-agenda~) :: + + #+kindex: c + #+findex: org-calendar-goto-agenda + When in the calendar, compute and show the Org agenda for the date + at point. + +- {{{kbd(i)}}} (~org-agenda-diary-entry~) :: + #+kindex: i + #+findex: org-agenda-diary-entry + + #+cindex: diary entries, creating from agenda + Insert a new entry into the diary, using the date at point and (for + block entries) the date at the mark. This adds to the Emacs diary + file[fn:101], in a way similar to the {{{kbd(i)}}} command in the + calendar. The diary file pops up in another window, where you can + add the entry. + + #+vindex: org-agenda-diary-file + If you configure ~org-agenda-diary-file~ to point to an Org file, + Org creates entries in that file instead. Most entries are stored + in a date-based outline tree that will later make it easy to archive + appointments from previous months/years. The tree is built under an + entry with a =DATE_TREE= property, or else with years as top-level + entries. Emacs prompts you for the entry text---if you specify it, + the entry is created in ~org-agenda-diary-file~ without further + interaction. If you directly press {{{kbd(RET)}}} at the prompt + without typing text, the target file is shown in another window for + you to finish the entry there. See also the {{{kbd(k r)}}} command. + +- {{{kbd(M)}}} (~org-agenda-phases-of-moon~) :: + + #+kindex: M + #+findex: org-agenda-phases-of-moon + Show the phases of the moon for the three months around current + date. + +- {{{kbd(S)}}} (~org-agenda-sunrise-sunset~) :: + + #+kindex: S + #+findex: org-agenda-sunrise-sunset + Show sunrise and sunset times. The geographical location must be + set with calendar variables, see the documentation for the Emacs + calendar. + +- {{{kbd(C)}}} (~org-agenda-convert-date~) :: + + #+kindex: C + #+findex: org-agenda-convert-date + Convert the date at point into many other cultural and historic + calendars. + +- {{{kbd(H)}}} (~org-agenda-holidays~) :: + + #+kindex: H + #+findex: org-agenda-holidays + Show holidays for three months around point date. + +*** Quit and exit +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(q)}}} (~org-agenda-quit~) :: + #+kindex: q + #+findex: org-agenda-quit + + Quit agenda, remove the agenda buffer. + +- {{{kbd(x)}}} (~org-agenda-exit~) :: + #+kindex: x + #+findex: org-agenda-exit + + #+cindex: agenda files, removing buffers + Exit agenda, remove the agenda buffer and all buffers loaded by + Emacs for the compilation of the agenda. Buffers created by the + user to visit Org files are not removed. + +** Custom Agenda Views +:PROPERTIES: +:DESCRIPTION: Defining special searches and views. +:END: +#+cindex: custom agenda views +#+cindex: agenda views, custom + +Custom agenda commands serve two purposes: to store and quickly access +frequently used TODO and tags searches, and to create special +composite agenda buffers. Custom agenda commands are accessible +through the dispatcher (see [[*The Agenda Dispatcher]]), just like the +default commands. + +*** Storing searches +:PROPERTIES: +:DESCRIPTION: Type once, use often. +:END: + +The first application of custom searches is the definition of keyboard +shortcuts for frequently used searches, either creating an agenda +buffer, or a sparse tree (the latter covering of course only the +current buffer). + +#+kindex: C @r{(Agenda dispatcher)} +#+vindex: org-agenda-custom-commands +#+cindex: agenda views, main example +#+cindex: agenda, as an agenda views +#+cindex: agenda*, as an agenda views +#+cindex: tags, as an agenda view +#+cindex: todo, as an agenda view +#+cindex: tags-todo +#+cindex: todo-tree +#+cindex: occur-tree +#+cindex: tags-tree +Custom commands are configured in the variable +~org-agenda-custom-commands~. You can customize this variable, for +example by pressing {{{kbd(C)}}} from the agenda dispatcher (see [[*The +Agenda Dispatcher]]). You can also directly set it with Emacs Lisp in +the Emacs init file. The following example contains all valid agenda +views: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("x" agenda) + ("y" agenda*) + ("w" todo "WAITING") + ("W" todo-tree "WAITING") + ("u" tags "+boss-urgent") + ("v" tags-todo "+boss-urgent") + ("U" tags-tree "+boss-urgent") + ("f" occur-tree "\\") + ("h" . "HOME+Name tags searches") ;description for "h" prefix + ("hl" tags "+home+Lisa") + ("hp" tags "+home+Peter") + ("hk" tags "+home+Kim"))) +#+end_src + +The initial string in each entry defines the keys you have to press +after the dispatcher command in order to access the command. Usually +this is just a single character, but if you have many similar +commands, you can also define two-letter combinations where the first +character is the same in several combinations and serves as a prefix +key[fn:102]. The second parameter is the search type, followed by the +string or regular expression to be used for the matching. The example +above will therefore define: + +- {{{kbd(x)}}} :: + + as a global search for agenda entries planned[fn:103] this week/day. + +- {{{kbd(y)}}} :: + + as the same search, but only for entries with an hour specification + like =[h]h:mm=---think of them as appointments. + +- {{{kbd(w)}}} :: + + as a global search for TODO entries with =WAITING= as the TODO + keyword. + +- {{{kbd(W)}}} :: + + as the same search, but only in the current buffer and displaying + the results as a sparse tree. + +- {{{kbd(u)}}} :: + + as a global tags search for headlines tagged =boss= but not + =urgent=. + +- {{{kbd(v)}}} :: + + The same search, but limiting it to headlines that are also TODO + items. + +- {{{kbd(U)}}} :: + + as the same search, but only in the current buffer and displaying + the result as a sparse tree. + +- {{{kbd(f)}}} :: + + to create a sparse tree (again, current buffer only) with all + entries containing the word =FIXME=. + +- {{{kbd(h)}}} :: + + as a prefix command for a =HOME= tags search where you have to press + an additional key ({{{kbd(l)}}}, {{{kbd(p)}}} or {{{kbd(k)}}}) to + select a name (Lisa, Peter, or Kim) as additional tag to match. + +Note that ~*-tree~ agenda views need to be called from an Org buffer +as they operate on the current buffer only. + +*** Block agenda +:PROPERTIES: +:DESCRIPTION: All the stuff you need in a single buffer. +:END: +#+cindex: block agenda +#+cindex: agenda, with block views + +Another possibility is the construction of agenda views that comprise +the results of /several/ commands, each of which creates a block in +the agenda buffer. The available commands include ~agenda~ for the +daily or weekly agenda (as created with {{{kbd(a)}}}) , ~alltodo~ for +the global TODO list (as constructed with {{{kbd(t)}}}), ~stuck~ for +the list of stuck projects (as obtained with {{{kbd(#)}}}) and the +matching commands discussed above: ~todo~, ~tags~, and ~tags-todo~. + +Here are two examples: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("h" "Agenda and Home-related tasks" + ((agenda "") + (tags-todo "home") + (tags "garden"))) + ("o" "Agenda and Office-related tasks" + ((agenda "") + (tags-todo "work") + (tags "office"))))) +#+end_src + +#+texinfo: @noindent +This defines {{{kbd(h)}}} to create a multi-block view for stuff you +need to attend to at home. The resulting agenda buffer contains your +agenda for the current week, all TODO items that carry the tag =home=, +and also all lines tagged with =garden=. Finally the command +{{{kbd(o)}}} provides a similar view for office tasks. + +*** Setting options for custom commands +:PROPERTIES: +:DESCRIPTION: Changing the rules. +:ALT_TITLE: Setting options +:END: +#+cindex: options, for custom agenda views + +#+vindex: org-agenda-custom-commands +Org mode contains a number of variables regulating agenda construction +and display. The global variables define the behavior for all agenda +commands, including the custom commands. However, if you want to +change some settings just for a single custom view, you can do so. +Setting options requires inserting a list of variable names and values +at the right spot in ~org-agenda-custom-commands~. For example: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("w" todo "WAITING" + ((org-agenda-sorting-strategy '(priority-down)) + (org-agenda-prefix-format " Mixed: "))) + ("U" tags-tree "+boss-urgent" + ((org-show-context-detail 'minimal))) + ("N" search "" + ((org-agenda-files '("~org/notes.org")) + (org-agenda-text-search-extra-files nil))))) +#+end_src + +#+texinfo: @noindent +Now the {{{kbd(w)}}} command sorts the collected entries only by +priority, and the prefix format is modified to just say =Mixed:= +instead of giving the category of the entry. The sparse tags tree of +{{{kbd(U)}}} now turns out ultra-compact, because neither the headline +hierarchy above the match, nor the headline following the match are +shown. The command {{{kbd(N)}}} does a text search limited to only +a single file. + +For command sets creating a block agenda, ~org-agenda-custom-commands~ +has two separate spots for setting options. You can add options that +should be valid for just a single command in the set, and options that +should be valid for all commands in the set. The former are just +added to the command entry; the latter must come after the list of +command entries. Going back to the block agenda example (see [[*Block +agenda]]), let's change the sorting strategy for the {{{kbd(h)}}} +commands to ~priority-down~, but let's sort the results for =garden= +tags query in the opposite order, ~priority-up~. This would look like +this: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("h" "Agenda and Home-related tasks" + ((agenda) + (tags-todo "home") + (tags "garden" + ((org-agenda-sorting-strategy '(priority-up))))) + ((org-agenda-sorting-strategy '(priority-down)))) + ("o" "Agenda and Office-related tasks" + ((agenda) + (tags-todo "work") + (tags "office"))))) +#+end_src + +As you see, the values and parentheses setting is a little complex. +When in doubt, use the customize interface to set this variable---it +fully supports its structure. Just one caveat: when setting options +in this interface, the /values/ are just Lisp expressions. So if the +value is a string, you need to add the double-quotes around the value +yourself. + +#+vindex: org-agenda-custom-commands-contexts +To control whether an agenda command should be accessible from +a specific context, you can customize +~org-agenda-custom-commands-contexts~. Let's say for example that you +have an agenda command {{{kbd(o)}}} displaying a view that you only +need when reading emails. Then you would configure this option like +this: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands-contexts + '(("o" (in-mode . "message-mode")))) +#+end_src + +You can also tell that the command key {{{kbd(o)}}} should refer to +another command key {{{kbd(r)}}}. In that case, add this command key +like this: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands-contexts + '(("o" "r" (in-mode . "message-mode")))) +#+end_src + +See the docstring of the variable for more information. + +** Exporting Agenda Views +:PROPERTIES: +:DESCRIPTION: Writing a view to a file. +:END: +#+cindex: agenda views, exporting + +If you are away from your computer, it can be very useful to have +a printed version of some agenda views to carry around. Org mode can +export custom agenda views as plain text, HTML[fn:104], Postscript, +PDF[fn:105], and iCalendar files. If you want to do this only +occasionally, use the following command: + +- {{{kbd(C-x C-w)}}} (~org-agenda-write~) :: + #+kindex: C-x C-w + #+findex: org-agenda-write + #+cindex: exporting agenda views + #+cindex: agenda views, exporting + + #+vindex: org-agenda-exporter-settings + Write the agenda view to a file. + +If you need to export certain agenda views frequently, you can +associate any custom agenda command with a list of output file +names[fn:106]. Here is an example that first defines custom commands +for the agenda and the global TODO list, together with a number of +files to which to export them. Then we define two block agenda +commands and specify file names for them as well. File names can be +relative to the current working directory, or absolute. + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("X" agenda "" nil ("agenda.html" "agenda.ps")) + ("Y" alltodo "" nil ("todo.html" "todo.txt" "todo.ps")) + ("h" "Agenda and Home-related tasks" + ((agenda "") + (tags-todo "home") + (tags "garden")) + nil + ("~/views/home.html")) + ("o" "Agenda and Office-related tasks" + ((agenda) + (tags-todo "work") + (tags "office")) + nil + ("~/views/office.ps" "~/calendars/office.ics")))) +#+end_src + +The extension of the file name determines the type of export. If it +is =.html=, Org mode uses the htmlize package to convert the buffer to +HTML and save it to this file name. If the extension is =.ps=, +~ps-print-buffer-with-faces~ is used to produce Postscript output. If +the extension is =.ics=, iCalendar export is run export over all files +that were used to construct the agenda, and limit the export to +entries listed in the agenda. Any other extension produces a plain +ASCII file. + +The export files are /not/ created when you use one of those +commands interactively because this might use too much overhead. +Instead, there is a special command to produce /all/ specified +files in one step: + +- {{{kbd(e)}}} (~org-store-agenda-views~) :: + + #+kindex: e @r{(Agenda dispatcher)} + #+findex: org-store-agenda-views + Export all agenda views that have export file names associated with + them. + +You can use the options section of the custom agenda commands to also +set options for the export commands. For example: + +#+begin_src emacs-lisp +(setq org-agenda-custom-commands + '(("X" agenda "" + ((ps-number-of-columns 2) + (ps-landscape-mode t) + (org-agenda-prefix-format " [ ] ") + (org-agenda-with-colors nil) + (org-agenda-remove-tags t)) + ("theagenda.ps")))) +#+end_src + +#+texinfo: @noindent +#+vindex: org-agenda-exporter-settings +This command sets two options for the Postscript exporter, to make it +print in two columns in landscape format---the resulting page can be +cut in two and then used in a paper agenda. The remaining settings +modify the agenda prefix to omit category and scheduling information, +and instead include a checkbox to check off items. We also remove the +tags to make the lines compact, and we do not want to use colors for +the black-and-white printer. Settings specified in +~org-agenda-exporter-settings~ also apply, e.g., + +#+begin_src emacs-lisp +(setq org-agenda-exporter-settings + '((ps-number-of-columns 2) + (ps-landscape-mode t) + (org-agenda-add-entry-text-maxlines 5) + (htmlize-output-type 'css))) +#+end_src + +#+texinfo: @noindent +but the settings in ~org-agenda-custom-commands~ take precedence. + +From the command line you may also use: + +#+begin_src shell +emacs -eval (org-batch-store-agenda-views) -kill +#+end_src + +#+texinfo: @noindent +or, if you need to modify some parameters[fn:107] + +#+begin_src shell +emacs -eval '(org-batch-store-agenda-views \ + org-agenda-span (quote month) \ + org-agenda-start-day "2007-11-01" \ + org-agenda-include-diary nil \ + org-agenda-files (quote ("~/org/project.org")))' \ + -kill +#+end_src + +#+texinfo: @noindent +which creates the agenda views restricted to the file +=~/org/project.org=, without diary entries and with a 30-day extent. + +You can also extract agenda information in a way that allows further +processing by other programs. See [[*Extracting Agenda Information]], for +more information. + +** Using Column View in the Agenda +:PROPERTIES: +:DESCRIPTION: Using column view for collected entries. +:ALT_TITLE: Agenda Column View +:END: +#+cindex: column view, in agenda +#+cindex: agenda, column view + +Column view (see [[*Column View]]) is normally used to view and edit +properties embedded in the hierarchical structure of an Org file. It +can be quite useful to use column view also from the agenda, where +entries are collected by certain criteria. + +- {{{kbd(C-c C-x C-c)}}} (~org-agenda-columns~) :: + #+kindex: C-c C-x C-c + #+findex: org-agenda-columns + + Turn on column view in the agenda. + +To understand how to use this properly, it is important to realize +that the entries in the agenda are no longer in their proper outline +environment. This causes the following issues: + +1. + #+vindex: org-columns-default-format-for-agenda + #+vindex: org-columns-default-format + Org needs to make a decision which columns format to use. Since + the entries in the agenda are collected from different files, and + different files may have different columns formats, this is a + non-trivial problem. Org first checks if + ~org-overriding-columns-format~ is currently set, and if so, takes + the format from there. You should set this variable only in the + /local settings section/ of a custom agenda command (see [[*Custom + Agenda Views]]) to make it valid for that specific agenda view. If + no such binding exists, it checks, in sequence, + ~org-columns-default-format-for-agenda~, the format associated with + the first item in the agenda (through a property or a =#+COLUMNS= + setting in that buffer) and finally ~org-columns-default-format~. + +2. + #+cindex: @samp{CLOCKSUM}, special property + If any of the columns has a summary type defined (see [[*Column + attributes]]), turning on column view in the agenda visits all + relevant agenda files and make sure that the computations of this + property are up to date. This is also true for the special + =CLOCKSUM= property. Org then sums the values displayed in the + agenda. In the daily/weekly agenda, the sums cover a single day; + in all other views they cover the entire block. + + It is important to realize that the agenda may show the same entry + /twice/---for example as scheduled and as a deadline---and it may + show two entries from the same hierarchy (for example a /parent/ + and its /child/). In these cases, the summation in the agenda + leads to incorrect results because some values count double. + +3. When the column view in the agenda shows the =CLOCKSUM= property, + that is always the entire clocked time for this item. So even in + the daily/weekly agenda, the clocksum listed in column view may + originate from times outside the current view. This has the + advantage that you can compare these values with a column listing + the planned total effort for a task---one of the major + applications for column view in the agenda. If you want + information about clocked time in the displayed period use clock + table mode (press {{{kbd(R)}}} in the agenda). + +4. + #+cindex: @samp{CLOCKSUM_T}, special property + When the column view in the agenda shows the =CLOCKSUM_T= property, + that is always today's clocked time for this item. So even in the + weekly agenda, the clocksum listed in column view only originates + from today. This lets you compare the time you spent on a task for + today, with the time already spent---via =CLOCKSUM=---and with + the planned total effort for it. + +* Markup for Rich Contents +:PROPERTIES: +:DESCRIPTION: Compose beautiful documents. +:END: + +Org is primarily about organizing and searching through your +plain-text notes. However, it also provides a lightweight yet robust +markup language for rich text formatting and more. For instance, you +may want to center or emphasize text. Or you may need to insert +a formula or image in your writing. Org offers syntax for all of this +and more. Used in conjunction with the export framework (see +[[*Exporting]]), you can author beautiful documents in Org---like the fine +manual you are currently reading. + +** Paragraphs +:PROPERTIES: +:DESCRIPTION: The basic unit of text. +:END: + +#+cindex: paragraphs, markup rules +Paragraphs are separated by at least one empty line. If you need to +enforce a line break within a paragraph, use =\\= at the end of +a line. + +#+cindex: line breaks, markup rules +To preserve the line breaks, indentation and blank lines in a region, +but otherwise use normal formatting, you can use this construct, which +can also be used to format poetry. + +#+cindex: @samp{BEGIN_VERSE} +#+cindex: verse blocks +#+begin_example +,#+BEGIN_VERSE + Great clouds overhead + Tiny black birds rise and fall + Snow covers Emacs + + ---AlexSchroeder +,#+END_VERSE +#+end_example + +When quoting a passage from another document, it is customary to +format this as a paragraph that is indented on both the left and the +right margin. You can include quotations in Org documents like this: + +#+cindex: @samp{BEGIN_QUOTE} +#+cindex: quote blocks +#+begin_example +,#+BEGIN_QUOTE +Everything should be made as simple as possible, +but not any simpler ---Albert Einstein +,#+END_QUOTE +#+end_example + +If you would like to center some text, do it like this: + +#+cindex: @samp{BEGIN_CENTER} +#+cindex: center blocks +#+begin_example +,#+BEGIN_CENTER +Everything should be made as simple as possible, \\ +but not any simpler +,#+END_CENTER +#+end_example + +** Emphasis and Monospace +:PROPERTIES: +:DESCRIPTION: Bold, italic, etc. +:END: +#+cindex: underlined text, markup rules +#+cindex: bold text, markup rules +#+cindex: italic text, markup rules +#+cindex: verbatim text, markup rules +#+cindex: code text, markup rules +#+cindex: strike-through text, markup rules + +You can make words =*bold*=, =/italic/=, =_underlined_=, ==verbatim== +and =~code~=, and, if you must, =+strike-through+=. Text in the code +and verbatim string is not processed for Org specific syntax; it is +exported verbatim. + +#+vindex: org-fontify-emphasized-text +To turn off fontification for marked up text, you can set +~org-fontify-emphasized-text~ to ~nil~. To narrow down the list of +available markup syntax, you can customize ~org-emphasis-alist~. + +Sometimes, when marked text also contains the marker character itself, +the result may be unsettling. For example, + +#+begin_example +/One may expect this whole sentence to be italicized, but the +following ~user/?variable~ contains =/= character, which effectively +stops emphasis there./ +#+end_example + +You can use zero width space to help Org sorting out the ambiguity. +See [[*Escape Character]] for more details. + +** Subscripts and Superscripts +:PROPERTIES: +:DESCRIPTION: Simple syntax for raising/lowering text. +:END: +#+cindex: subscript +#+cindex: superscript + +=^= and =_= are used to indicate super- and subscripts. To increase +the readability of ASCII text, it is not necessary, but OK, to +surround multi-character sub- and superscripts with curly braces. For +example + +#+begin_example +The radius of the sun is R_sun = 6.96 x 10^8 m. On the other hand, +the radius of Alpha Centauri is R_{Alpha Centauri} = 1.28 x R_{sun}. +#+end_example + +#+vindex: org-use-sub-superscripts +If you write a text where the underscore is often used in a different +context, Org's convention to always interpret these as subscripts can +get in your way. Configure the variable ~org-use-sub-superscripts~ to +change this convention. For example, when setting this variable to +~{}~, =a_b= is not interpreted as a subscript, but =a_{b}= is. + +You can set ~org-use-sub-superscripts~ in a file using the export +option =^:= (see [[*Export Settings][Export Settings]]). For example, =#+OPTIONS: ^:{}= +sets ~org-use-sub-superscripts~ to ~{}~ and limits super- and +subscripts to the curly bracket notation. + +You can also toggle the visual display of super- and subscripts: + +- {{{kbd(C-c C-x \)}}} (~org-toggle-pretty-entities~) :: + + #+kindex: C-c C-x \ + #+findex: org-toggle-pretty-entities + This command formats sub- and superscripts in a WYSIWYM way. + +#+vindex: org-pretty-entities +#+vindex: org-pretty-entities-include-sub-superscripts +Set both ~org-pretty-entities~ and +~org-pretty-entities-include-sub-superscripts~ to ~t~ to start with +super- and subscripts /visually/ interpreted as specified by the +option ~org-use-sub-superscripts~. + +** Special Symbols +:PROPERTIES: +:DESCRIPTION: Greek letters and other symbols. +:END: +#+cindex: math symbols +#+cindex: special symbols +#+cindex: entities + +You can use LaTeX-like syntax to insert special symbols---named +entities---like =\alpha= to indicate the Greek letter, or =\to= to indicate +an arrow. Completion for these symbols is available, just type =\= +and maybe a few letters, and press {{{kbd(M-TAB)}}} to see possible +completions. If you need such a symbol inside a word, terminate it +with a pair of curly brackets. For example + +#+begin_example +Pro tip: Given a circle \Gamma of diameter d, the length of its +circumference is \pi{}d. +#+end_example + +#+findex: org-entities-help +#+vindex: org-entities-user +A large number of entities is provided, with names taken from both +HTML and LaTeX; you can comfortably browse the complete list from +a dedicated buffer using the command ~org-entities-help~. It is also +possible to provide your own special symbols in the variable +~org-entities-user~. + +During export, these symbols are transformed into the native format of +the exporter back-end. Strings like =\alpha= are exported as =α= in +the HTML output, and as =\(\alpha\)= in the LaTeX output. Similarly, =\nbsp= +becomes = = in HTML and =~= in LaTeX. + +#+cindex: special symbols, in-buffer display +If you would like to see entities displayed as UTF-8 characters, use +the following command[fn:108]: + +- {{{kbd(C-c C-x \)}}} (~org-toggle-pretty-entities~) :: + #+kindex: C-c C-x \ + #+findex: org-toggle-pretty-entities + + Toggle display of entities as UTF-8 characters. This does not + change the buffer content which remains plain ASCII, but it overlays + the UTF-8 character for display purposes only. + +#+cindex: shy hyphen, special symbol +#+cindex: dash, special symbol +#+cindex: ellipsis, special symbol +In addition to regular entities defined above, Org exports in +a special way[fn:109] the following commonly used character +combinations: =\-= is treated as a shy hyphen, =--= and =---= are +converted into dashes, and =...= becomes a compact set of dots. + +** Embedded LaTeX +:PROPERTIES: +:DESCRIPTION: LaTeX can be freely used inside Org documents. +:END: +#+cindex: @TeX{} interpretation +#+cindex: @LaTeX{} interpretation + +Plain ASCII is normally sufficient for almost all note taking. +Exceptions include scientific notes, which often require mathematical +symbols and the occasional formula. LaTeX[fn:110] is widely used to +typeset scientific documents. Org mode supports embedding LaTeX code +into its files, because many academics are used to writing and reading +LaTeX source code, and because it can be readily processed to produce +pretty output for a number of export back-ends. + +*** LaTeX fragments +:PROPERTIES: +:DESCRIPTION: Complex formulas made easy. +:END: +#+cindex: @LaTeX{} fragments + +#+vindex: org-format-latex-header +Org mode can contain LaTeX math fragments, and it supports ways to +process these for several export back-ends. When exporting to LaTeX, +the code is left as it is. When exporting to HTML, Org can use either +[[https://www.mathjax.org][MathJax]] (see [[*Math formatting in HTML export]]) or transcode the math +into images (see [[*Previewing LaTeX fragments]]). + +LaTeX fragments do not need any special marking at all. The following +snippets are identified as LaTeX source code: + +- Environments of any kind[fn:111]. The only requirement is that the + =\begin= statement appears on a new line, preceded by only + whitespace. + +- Text within the usual LaTeX math delimiters. To avoid conflicts + with currency specifications, single =$= characters are only + recognized as math delimiters if the enclosed text contains at most + two line breaks, is directly attached to the =$= characters with no + whitespace in between, and if the closing =$= is followed by + whitespace, punctuation or a dash. For the other delimiters, there + is no such restriction, so when in doubt, use =\(...\)= as inline + math delimiters. + +#+texinfo: @noindent +For example: + +#+begin_example +\begin{equation} % arbitrary environments, +x=\sqrt{b} % even tables, figures +\end{equation} % etc + +If $a^2=b$ and \( b=2 \), then the solution must be +either $$ a=+\sqrt{2} $$ or \[ a=-\sqrt{2} \]. +#+end_example + +#+vindex: org-export-with-latex +LaTeX processing can be configured with the variable +~org-export-with-latex~. The default setting is ~t~ which means +MathJax for HTML, and no processing for ASCII and LaTeX back-ends. +You can also set this variable on a per-file basis using one of these +lines: + +| =#+OPTIONS: tex:t= | Do the right thing automatically (MathJax) | +| =#+OPTIONS: tex:nil= | Do not process LaTeX fragments at all | +| =#+OPTIONS: tex:verbatim= | Verbatim export, for jsMath or so | + +*** Previewing LaTeX fragments +:PROPERTIES: +:DESCRIPTION: What will this snippet look like? +:END: +#+cindex: @LaTeX{} fragments, preview + +#+vindex: org-preview-latex-default-process +If you have a working LaTeX installation and =dvipng=, =dvisvgm= or +=convert= installed[fn:112], LaTeX fragments can be processed to +produce images of the typeset expressions to be used for inclusion +while exporting to HTML (see [[*LaTeX fragments]]), or for inline +previewing within Org mode. + +#+vindex: org-format-latex-options +#+vindex: org-format-latex-header +You can customize the variables ~org-format-latex-options~ and +~org-format-latex-header~ to influence some aspects of the preview. +In particular, the ~:scale~ (and for HTML export, ~:html-scale~) +property of the former can be used to adjust the size of the preview +images. + +- {{{kbd(C-c C-x C-l)}}} (~org-latex-preview~) :: + #+kindex: C-c C-x C-l + #+findex: org-latex-preview + + Produce a preview image of the LaTeX fragment at point and overlay + it over the source code. If there is no fragment at point, process + all fragments in the current entry---between two headlines. + + When called with a single prefix argument, clear all images in the + current entry. Two prefix arguments produce a preview image for all + fragments in the buffer, while three of them clear all the images in + that buffer. + +#+vindex: org-startup-with-latex-preview +You can turn on the previewing of all LaTeX fragments in a file with + +: #+STARTUP: latexpreview + +To disable it, simply use + +: #+STARTUP: nolatexpreview + +*** Using CDLaTeX to enter math +:PROPERTIES: +:DESCRIPTION: Speed up entering of formulas. +:ALT_TITLE: CDLaTeX mode +:END: +#+cindex: CD@LaTeX{} + +CDLaTeX mode is a minor mode that is normally used in combination with +a major LaTeX mode like AUCTeX in order to speed-up insertion of +environments and math templates. Inside Org mode, you can make use of +some of the features of CDLaTeX mode. You need to install +=cdlatex.el= and =texmathp.el= (the latter comes also with AUCTeX) +using [[https://melpa.org/][MELPA]] with the [[https://www.gnu.org/software/emacs/manual/html_node/emacs/Package-Installation.html][Emacs packaging system]] or alternatively from +[[https://staff.fnwi.uva.nl/c.dominik/Tools/cdlatex/]]. Do not use +CDLaTeX mode itself under Org mode, but use the special version Org +CDLaTeX minor mode that comes as part of Org. Turn it on for the +current buffer with {{{kbd(M-x org-cdlatex-mode)}}}, or for all Org +files with + +#+begin_src emacs-lisp +(add-hook 'org-mode-hook #'turn-on-org-cdlatex) +#+end_src + +When this mode is enabled, the following features are present (for +more details see the documentation of CDLaTeX mode): + +#+attr_texinfo: :sep , +- {{{kbd(C-c {)}}} :: + #+kindex: C-c @{ + + Insert an environment template. + +- {{{kbd(TAB)}}} :: + #+kindex: TAB + + The {{{kbd(TAB)}}} key expands the template if point is inside + a LaTeX fragment[fn:113]. For example, {{{kbd(TAB)}}} expands =fr= + to =\frac{}{}= and position point correctly inside the first brace. + Another {{{kbd(TAB)}}} gets you into the second brace. + + Even outside fragments, {{{kbd(TAB)}}} expands environment + abbreviations at the beginning of a line. For example, if you write + =equ= at the beginning of a line and press {{{kbd(TAB)}}}, this + abbreviation is expanded to an =equation= environment. To get + a list of all abbreviations, type {{{kbd(M-x + cdlatex-command-help)}}}. + +- {{{kbd(^)}}}, {{{kbd(_)}}} :: + #+kindex: _ + #+kindex: ^ + #+vindex: cdlatex-simplify-sub-super-scripts + + Pressing {{{kbd(_)}}} and {{{kbd(^)}}} inside a LaTeX fragment + inserts these characters together with a pair of braces. If you use + {{{kbd(TAB)}}} to move out of the braces, and if the braces surround + only a single character or macro, they are removed again (depending + on the variable ~cdlatex-simplify-sub-super-scripts~). + +- {{{kbd(`)}}} :: + #+kindex: ` + + Pressing the backquote followed by a character inserts math macros, + also outside LaTeX fragments. If you wait more than 1.5 seconds + after the backquote, a help window pops up. + +- {{{kbd(')}}} :: + #+kindex: ' + + Pressing the single-quote followed by another character modifies the + symbol before point with an accent or a font. If you wait more than + 1.5 seconds after the single-quote, a help window pops up. + Character modification works only inside LaTeX fragments; outside + the quote is normal. + +** Literal Examples +:PROPERTIES: +:DESCRIPTION: Source code examples with special formatting. +:END: +#+cindex: literal examples, markup rules +#+cindex: code line references, markup rules + +You can include literal examples that should not be subjected to +markup. Such examples are typeset in monospace, so this is well +suited for source code and similar examples. + +#+cindex: @samp{BEGIN_EXAMPLE} +#+cindex: example block +#+begin_example +,#+BEGIN_EXAMPLE + Some example from a text file. +,#+END_EXAMPLE +#+end_example + +#+cindex: comma escape, in literal examples +There is one limitation, however. You must insert a comma right +before lines starting with either =*=, =,*=, =#+= or =,#+=, as those +may be interpreted as outlines nodes or some other special syntax. +Org transparently strips these additional commas whenever it accesses +the contents of the block. + +#+begin_example +,#+BEGIN_EXAMPLE +,,* I am no real headline +,#+END_EXAMPLE +#+end_example + +For simplicity when using small examples, you can also start the +example lines with a colon followed by a space. There may also be +additional whitespace before the colon: + +#+begin_example +Here is an example + : Some example from a text file. +#+end_example + +#+cindex: formatting source code, markup rules +#+vindex: org-latex-listings +If the example is source code from a programming language, or any +other text that can be marked up by Font Lock in Emacs, you can ask +for the example to look like the fontified Emacs buffer[fn:114]. This +is done with the code block, where you also need to specify the name +of the major mode that should be used to fontify the example[fn:115], +see [[*Structure Templates]] for shortcuts to easily insert code blocks. + +#+cindex: @samp{BEGIN_SRC} +#+cindex: source block +#+begin_example +,#+BEGIN_SRC emacs-lisp + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) + ,#+END_SRC +#+end_example + +Both in =example= and in =src= snippets, you can add a =-n= switch to +the end of the =#+BEGIN= line, to get the lines of the example +numbered. The =-n= takes an optional numeric argument specifying the +starting line number of the block. If you use a =+n= switch, the +numbering from the previous numbered snippet is continued in the +current one. The =+n= switch can also take a numeric argument. This +adds the value of the argument to the last line of the previous block +to determine the starting line number. + +#+begin_example +,#+BEGIN_SRC emacs-lisp -n 20 + ;; This exports with line number 20. + (message "This is line 21") +,#+END_SRC + +,#+BEGIN_SRC emacs-lisp +n 10 + ;; This is listed as line 31. + (message "This is line 32") +,#+END_SRC +#+end_example + +In literal examples, Org interprets strings like =(ref:name)= as +labels, and use them as targets for special hyperlinks like +=[[(name)]]=---i.e., the reference name enclosed in single parenthesis. +In HTML, hovering the mouse over such a link remote-highlights the +corresponding code line, which is kind of cool. + +You can also add a =-r= switch which /removes/ the labels from the +source code[fn:116]. With the =-n= switch, links to these references +are labeled by the line numbers from the code listing. Otherwise +links use the labels with no parentheses. Here is an example: + +#+begin_example -l "(dumb-reference:%s)" +,#+BEGIN_SRC emacs-lisp -n -r + (save-excursion (ref:sc) + (goto-char (point-min)) (ref:jump) +,#+END_SRC +In line [[(sc)]] we remember the current position. [[(jump)][Line (jump)]] +jumps to point-min. +#+end_example + +#+cindex: indentation, in source blocks +Source code and examples may be /indented/ in order to align nicely +with the surrounding text, and in particular with plain list structure +(see [[*Plain Lists]]). By default, Org only retains the relative +indentation between lines, e.g., when exporting the contents of the +block. However, you can use the =-i= switch to also preserve the +global indentation, if it does matter. See [[*Editing Source Code]]. + +#+vindex: org-coderef-label-format +If the syntax for the label format conflicts with the language syntax, +use a =-l= switch to change the format, for example + +: #+BEGIN_SRC pascal -n -r -l "((%s))" + +#+texinfo: @noindent +See also the variable ~org-coderef-label-format~. + +HTML export also allows examples to be published as text areas (see +[[*Text areas in HTML export]]). + +Because the =#+BEGIN= ... =#+END= patterns need to be added so often, +a shortcut is provided (see [[*Structure Templates]]). + +- {{{kbd(C-c ')}}} (~org-edit-special~) :: + + #+kindex: C-c ' + #+findex: org-edit-special + Edit the source code example at point in its native mode. This + works by switching to a temporary buffer with the source code. You + need to exit by pressing {{{kbd(C-c ')}}} again. The edited version + then replaces the old version in the Org buffer. Fixed-width + regions---where each line starts with a colon followed by + a space---are edited using Artist mode[fn:117] to allow creating + ASCII drawings easily. Using this command in an empty line creates + a new fixed-width region. + +#+cindex: storing link, in a source code buffer +Calling ~org-store-link~ (see [[*Handling Links]]) while editing a source +code example in a temporary buffer created with {{{kbd(C-c ')}}} +prompts for a label. Make sure that it is unique in the current +buffer, and insert it with the proper formatting like =(ref:label)= at +the end of the current line. Then the label is stored as a link +=(label)=, for retrieval with {{{kbd(C-c C-l)}}}. + +** Images +:PROPERTIES: +:DESCRIPTION: Display an image. +:END: + +#+cindex: inlining images +#+cindex: images, markup rules +An image is a link to an image file[fn:118] that does not have +a description part, for example + +: ./img/cat.jpg + +If you wish to define a caption for the image (see [[*Captions]]) and +maybe a label for internal cross references (see [[*Internal Links]]), +make sure that the link is on a line by itself and precede it with +=CAPTION= and =NAME= keywords as follows: + +#+begin_example +,#+CAPTION: This is the caption for the next figure link (or table) +,#+NAME: fig:SED-HR4049 +[[./img/a.jpg]] +#+end_example + +Such images can be displayed within the buffer with the following +command: + +- {{{kbd(C-c C-x C-v)}}} (~org-toggle-inline-images~) :: + + #+kindex: C-c C-x C-v + #+findex: org-toggle-inline-images + #+vindex: org-startup-with-inline-images + Toggle the inline display of linked images. When called with + a prefix argument, also display images that do have a link + description. You can ask for inline images to be displayed at + startup by configuring the variable + ~org-startup-with-inline-images~[fn:119]. + +** Captions +:PROPERTIES: +:DESCRIPTION: Describe tables, images... +:END: +#+cindex: captions, markup rules +#+cindex: @samp{CAPTION}, keyword + +You can assign a caption to a specific part of a document by inserting +a =CAPTION= keyword immediately before it: + +#+begin_example +,#+CAPTION: This is the caption for the next table (or link) +| ... | ... | +|-----+-----| +#+end_example + +Optionally, the caption can take the form: + +: #+CAPTION[Short caption]: Longer caption. + +Even though images and tables are prominent examples of captioned +structures, the same caption mechanism can apply to many +others---e.g., LaTeX equations, source code blocks. Depending on the +export back-end, those may or may not be handled. + +** Horizontal Rules +:PROPERTIES: +:DESCRIPTION: Make a line. +:END: + +#+cindex: horizontal rules, markup rules +A line consisting of only dashes, and at least 5 of them, is exported +as a horizontal line. + +** Creating Footnotes +:PROPERTIES: +:DESCRIPTION: Edit and read footnotes. +:END: +#+cindex: footnotes + +A footnote is started by a footnote marker in square brackets in +column 0, no indentation allowed. It ends at the next footnote +definition, headline, or after two consecutive empty lines. The +footnote reference is simply the marker in square brackets, inside +text. Markers always start with =fn:=. For example: + +#+begin_example +The Org homepage[fn:1] now looks a lot better than it used to. +... +[fn:1] The link is: https://orgmode.org +#+end_example + +Org mode extends the number-based syntax to /named/ footnotes and +optional inline definition. Here are the valid references: + +- =[fn:NAME]= :: + + A named footnote reference, where {{{var(NAME)}}} is a unique + label word, or, for simplicity of automatic creation, a number. + +- =[fn:: This is the inline definition of this footnote]= :: + + An anonymous footnote where the definition is given directly at the + reference point. + +- =[fn:NAME: a definition]= :: + + An inline definition of a footnote, which also specifies a name for + the note. Since Org allows multiple references to the same note, + you can then use =[fn:NAME]= to create additional references. + +#+vindex: org-footnote-auto-label +Footnote labels can be created automatically, or you can create names +yourself. This is handled by the variable ~org-footnote-auto-label~ +and its corresponding =STARTUP= keywords. See the docstring of that +variable for details. + +The following command handles footnotes: + +- {{{kbd(C-c C-x f)}}} :: + + The footnote action command. + + #+kindex: C-c C-x f + When point is on a footnote reference, jump to the definition. When + it is at a definition, jump to the---first---reference. + + #+vindex: org-footnote-define-inline + #+vindex: org-footnote-section + Otherwise, create a new footnote. Depending on the variable + ~org-footnote-define-inline~[fn:120], the definition is placed right + into the text as part of the reference, or separately into the + location determined by the variable ~org-footnote-section~. + + When this command is called with a prefix argument, a menu of + additional options is offered: + + #+attr_texinfo: :columns 0.1 0.9 + | {{{kbd(s)}}} | Sort the footnote definitions by reference sequence. | + | {{{kbd(r)}}} | Renumber the simple =fn:N= footnotes. | + | {{{kbd(S)}}} | Short for first {{{kbd(r)}}}, then {{{kbd(s)}}} action. | + | {{{kbd(n)}}} | Rename all footnotes into a =fn:1= ... =fn:n= sequence. | + | {{{kbd(d)}}} | Delete the footnote at point, including definition and references. | + + #+vindex: org-footnote-auto-adjust + Depending on the variable ~org-footnote-auto-adjust~[fn:121], + renumbering and sorting footnotes can be automatic after each + insertion or deletion. + +- {{{kbd(C-c C-c)}}} :: + + #+kindex: C-c C-c + If point is on a footnote reference, jump to the definition. If it + is at the definition, jump back to the reference. When called at + a footnote location with a prefix argument, offer the same menu as + {{{kbd(C-c C-x f)}}}. + +- {{{kbd(C-c C-o)}}} or {{{kbd(mouse-1/2)}}} :: + + #+kindex: C-c C-o + #+kindex: mouse-1 + #+kindex: mouse-2 + Footnote labels are also links to the corresponding definition or + reference, and you can use the usual commands to follow these links. + +* Exporting +:PROPERTIES: +:DESCRIPTION: Sharing and publishing notes. +:END: +#+cindex: exporting + +At some point you might want to print your notes, publish them on the +web, or share them with people not using Org. Org can convert and +export documents to a variety of other formats while retaining as much +structure (see [[*Document Structure]]) and markup (see [[*Markup for Rich +Contents]]) as possible. + +#+cindex: export back-end +The libraries responsible for translating Org files to other formats +are called /back-ends/. Org ships with support for the following +back-ends: + +- /ascii/ (ASCII format) +- /beamer/ (LaTeX Beamer format) +- /html/ (HTML format) +- /icalendar/ (iCalendar format) +- /latex/ (LaTeX format) +- /md/ (Markdown format) +- /odt/ (OpenDocument Text format) +- /org/ (Org format) +- /texinfo/ (Texinfo format) +- /man/ (Man page format) + +Users can install libraries for additional formats from the Emacs +packaging system. For easy discovery, these packages have a common +naming scheme: ~ox-NAME~, where {{{var(NAME)}}} is a format. For +example, ~ox-koma-letter~ for /koma-letter/ back-end. More libraries +can be found in the =org-contrib= repository (see [[*Installation]]). + +#+vindex: org-export-backends +Org only loads back-ends for the following formats by default: ASCII, +HTML, iCalendar, LaTeX, and ODT. Additional back-ends can be loaded +in either of two ways: by configuring the ~org-export-backends~ +variable, or by requiring libraries in the Emacs init file. For +example, to load the Markdown back-end, add this to your Emacs config: + +#+begin_src emacs-lisp +(require 'ox-md) +#+end_src + +** The Export Dispatcher +:PROPERTIES: +:DESCRIPTION: The main interface. +:END: +#+cindex: dispatcher, for export commands +#+cindex: export, dispatcher + +The export dispatcher is the main interface for Org's exports. +A hierarchical menu presents the currently configured export formats. +Options are shown as easy toggle switches on the same screen. + +#+vindex: org-export-dispatch-use-expert-ui +Org also has a minimal prompt interface for the export dispatcher. +When the variable ~org-export-dispatch-use-expert-ui~ is set to +a non-~nil~ value, Org prompts in the minibuffer. To switch back to +the hierarchical menu, press {{{kbd(?)}}}. + +- {{{kbd(C-c C-e)}}} (~org-export~) :: + #+kindex: C-c C-e + #+findex: org-export + + Invokes the export dispatcher interface. The options show default + settings. The {{{kbd(C-u)}}} prefix argument preserves options from + the previous export, including any sub-tree selections. + +Org exports the entire buffer by default. If the Org buffer has an +active region, then Org exports just that region. + +Within the dispatcher interface, the following key combinations can +further alter what is exported, and how. + +- {{{kbd(C-a)}}} :: + #+kindex: C-c C-e C-a + + Toggle asynchronous export. Asynchronous export uses an external + Emacs process with a specially configured initialization file to + complete the exporting process in the background, without tying-up + Emacs. This is particularly useful when exporting long documents. + + Output from an asynchronous export is saved on the /export stack/. + To view this stack, call the export dispatcher with a double + {{{kbd(C-u)}}} prefix argument. If already in the export dispatcher + menu, {{{kbd(&)}}} displays the stack. + + #+vindex: org-export-in-background + You can make asynchronous export the default by setting + ~org-export-in-background~. + + #+vindex: org-export-async-init-file + You can set the initialization file used by the background process + by setting ~org-export-async-init-file~. + +- {{{kbd(C-b)}}} :: + #+kindex: C-c C-e C-b + + Toggle body-only export. Useful for excluding headers and footers + in the export. Affects only those back-end formats that have + sections like =...= in HTML. + +- {{{kbd(C-s)}}} :: + #+kindex: C-c C-e C-s + + Toggle sub-tree export. When turned on, Org exports only the + sub-tree starting from point position at the time the export + dispatcher was invoked. Org uses the top heading of this sub-tree + as the document's title. If point is not on a heading, Org uses the + nearest enclosing header. If point is in the document preamble, Org + signals an error and aborts export. + + #+vindex: org-export-initial-scope + To make sub-tree export the default, customize the variable + ~org-export-initial-scope~. + +- {{{kbd(C-v)}}} :: + #+kindex: C-c C-e C-v + + Toggle visible-only export. This is useful for exporting only + certain parts of an Org document by adjusting the visibility of + particular headings. See also [[*Sparse Trees]]. + +** Export Settings +:PROPERTIES: +:DESCRIPTION: Common export settings. +:END: +#+cindex: options, for export +#+cindex: Export, settings + +#+cindex: @samp{OPTIONS}, keyword +Export options can be set: globally with variables; for an individual +file by making variables buffer-local with in-buffer settings (see +[[*Summary of In-Buffer Settings]]); by setting individual keywords or +specifying them in compact form with the =OPTIONS= keyword; or for +a tree by setting properties (see [[*Properties and Columns]]). Options +set at a specific level override options set at a more general level. + +#+cindex: @samp{SETUPFILE}, keyword +In-buffer settings may appear anywhere in the file, either directly or +indirectly through a file included using =#+SETUPFILE: filename or +URL= syntax. Option keyword sets tailored to a particular back-end +can be inserted from the export dispatcher (see [[*The Export +Dispatcher]]) using the =Insert template= command by pressing +{{{kbd(#)}}}. To insert keywords individually, a good way to make +sure the keyword is correct is to type =#+= and then to use +{{{kbd(M-TAB)}}}[fn:16] for completion. + +The export keywords available for every back-end, and their equivalent +global variables, include: + +- =AUTHOR= :: + + #+cindex: @samp{AUTHOR}, keyword + #+vindex: user-full-name + The document author (~user-full-name~). + +- =CREATOR= :: + + #+cindex: @samp{CREATOR}, keyword + #+vindex: org-expot-creator-string + Entity responsible for output generation + (~org-export-creator-string~). + +- =DATE= :: + + #+cindex: @samp{DATE}, keyword + #+vindex: org-export-date-timestamp-format + A date or a time-stamp[fn:122]. + +- =EMAIL= :: + + #+cindex: @samp{EMAIL}, keyword + #+vindex: user-mail-address + The email address (~user-mail-address~). + +- =LANGUAGE= :: + + #+cindex: @samp{LANGUAGE}, keyword + #+vindex: org-export-default-language + Language to use for translating certain strings + (~org-export-default-language~). With =#+LANGUAGE: fr=, for + example, Org translates =Table of contents= to the French =Table des + matières=[fn:123]. + +- =SELECT_TAGS= :: + + #+cindex: @samp{SELECT_TAGS}, keyword + #+vindex: org-export-select-tags + The default value is =("export")=. When a tree is tagged with + =export= (~org-export-select-tags~), Org selects that tree and its + sub-trees for export. Org excludes trees with =noexport= tags, see + below. When selectively exporting files with =export= tags set, Org + does not export any text that appears before the first headline. + +- =EXCLUDE_TAGS= :: + + #+cindex: @samp{EXCLUDE_TAGS}, keyword + #+vindex: org-export-exclude-tags + The default value is =("noexport")=. When a tree is tagged with + =noexport= (~org-export-exclude-tags~), Org excludes that tree and + its sub-trees from export. Entries tagged with =noexport= are + unconditionally excluded from the export, even if they have an + =export= tag. Even if a sub-tree is not exported, Org executes any + code blocks contained there. + +- =TITLE= :: + + #+cindex: @samp{TITLE}, keyword + #+cindex: document title + Org displays this title. For long titles, use multiple =#+TITLE= + lines. + +- =EXPORT_FILE_NAME= :: + + #+cindex: @samp{EXPORT_FILE_NAME}, keyword + The name of the output file to be generated. Otherwise, Org + generates the file name based on the buffer name and the extension + based on the back-end format. + +The =OPTIONS= keyword is a compact form. To configure multiple +options, use several =OPTIONS= lines. =OPTIONS= recognizes the +following arguments. + +- ~'~ :: + + #+vindex: org-export-with-smart-quotes + Toggle smart quotes (~org-export-with-smart-quotes~). Depending on + the language used, when activated, Org treats pairs of double quotes + as primary quotes, pairs of single quotes as secondary quotes, and + single quote marks as apostrophes. + +- ~*~ :: + + #+vindex: org-export-with-emphasize + Toggle emphasized text (~org-export-with-emphasize~). + +- ~-~ :: + + #+vindex: org-export-with-special-strings + Toggle conversion of special strings + (~org-export-with-special-strings~). + +- ~:~ :: + + #+vindex: org-export-with-fixed-width + Toggle fixed-width sections (~org-export-with-fixed-width~). + +- ~<~ :: + + #+vindex: org-export-with-timestamps + Toggle inclusion of time/date active/inactive stamps + (~org-export-with-timestamps~). + +- ~\n~ :: + + #+vindex: org-export-preserve-breaks + Toggles whether to preserve line breaks + (~org-export-preserve-breaks~). + +- ~^~ :: + + #+vindex: org-export-with-sub-superscripts + Toggle TeX-like syntax for sub- and superscripts. If you write + =^:{}=, =a_{b}= is interpreted, but the simple =a_b= is left as it + is (~org-export-with-sub-superscripts~). + +- ~arch~ :: + + #+vindex: org-export-with-archived-trees + Configure how archived trees are exported. When set to ~headline~, + the export process skips the contents and processes only the + headlines (~org-export-with-archived-trees~). + +- ~author~ :: + + #+vindex: org-export-with-author + Toggle inclusion of author name into exported file + (~org-export-with-author~). + +- ~broken-links~ :: + + #+vindex: org-export-with-broken-links + Toggles if Org should continue exporting upon finding a broken + internal link. When set to ~mark~, Org clearly marks the problem + link in the output (~org-export-with-broken-links~). + +- ~c~ :: + + #+vindex: org-export-with-clocks + Toggle inclusion of =CLOCK= keywords (~org-export-with-clocks~). + +- ~creator~ :: + + #+vindex: org-export-with-creator + Toggle inclusion of creator information in the exported file + (~org-export-with-creator~). + +- ~d~ :: + + #+vindex: org-export-with-drawers + Toggles inclusion of drawers, or list of drawers to include, or list + of drawers to exclude (~org-export-with-drawers~). + +- ~date~ :: + + #+vindex: org-export-with-date + Toggle inclusion of a date into exported file + (~org-export-with-date~). + +- ~e~ :: + + #+vindex: org-export-with-entities + Toggle inclusion of entities (~org-export-with-entities~). + +- ~email~ :: + + #+vindex: org-export-with-email + Toggle inclusion of the author's e-mail into exported file + (~org-export-with-email~). + +- ~f~ :: + + #+vindex: org-export-with-footnotes + Toggle the inclusion of footnotes (~org-export-with-footnotes~). + +- ~H~ :: + + #+vindex: org-export-headline-levels + Set the number of headline levels for export + (~org-export-headline-levels~). Below that level, headlines are + treated differently. In most back-ends, they become list items. + +- ~inline~ :: + + #+vindex: org-export-with-inlinetasks + Toggle inclusion of inlinetasks (~org-export-with-inlinetasks~). + +- ~num~ :: + + #+vindex: org-export-with-section-numbers + #+cindex: @samp{UNNUMBERED}, property + Toggle section-numbers (~org-export-with-section-numbers~). When + set to number N, Org numbers only those headlines at level N or + above. Set =UNNUMBERED= property to non-~nil~ to disable numbering + of heading and subheadings entirely. Moreover, when the value is + =notoc= the headline, and all its children, do not appear in the + table of contents either (see [[*Table of Contents]]). + +- ~p~ :: + + #+vindex: org-export-with-planning + Toggle export of planning information (~org-export-with-planning~). + "Planning information" comes from lines located right after the + headline and contain any combination of these cookies: =SCHEDULED=, + =DEADLINE=, or =CLOSED=. + +- ~pri~ :: + + #+vindex: org-export-with-priority + Toggle inclusion of priority cookies + (~org-export-with-priority~). + +- ~prop~ :: + + #+vindex: org-export-with-properties + Toggle inclusion of property drawers, or list the properties to + include (~org-export-with-properties~). + +- ~stat~ :: + + #+vindex: org-export-with-statistics-cookies + Toggle inclusion of statistics cookies + (~org-export-with-statistics-cookies~). + +- ~tags~ :: + + #+vindex: org-export-with-tags + Toggle inclusion of tags, may also be ~not-in-toc~ + (~org-export-with-tags~). + +- ~tasks~ :: + + #+vindex: org-export-with-tasks + Toggle inclusion of tasks (TODO items); or ~nil~ to remove all + tasks; or ~todo~ to remove done tasks; or list the keywords to keep + (~org-export-with-tasks~). + +- ~tex~ :: + + #+vindex: org-export-with-latex + ~nil~ does not export; ~t~ exports; ~verbatim~ keeps everything in + verbatim (~org-export-with-latex~). + +- ~timestamp~ :: + + #+vindex: org-export-time-stamp-file + Toggle inclusion of the creation time in the exported file + (~org-export-time-stamp-file~). + +- ~title~ :: + + #+vindex: org-export-with-title + Toggle inclusion of title (~org-export-with-title~). + +- ~toc~ :: + + #+vindex: org-export-with-toc + Toggle inclusion of the table of contents, or set the level limit + (~org-export-with-toc~). + +- ~todo~ :: + + #+vindex: org-export-with-todo-keywords + Toggle inclusion of TODO keywords into exported text + (~org-export-with-todo-keywords~). + +- ~|~ :: + + #+vindex: org-export-with-tables + Toggle inclusion of tables (~org-export-with-tables~). + +When exporting sub-trees, special node properties can override the +above keywords. These properties have an =EXPORT_= prefix. For +example, =DATE= becomes, =EXPORT_DATE= when used for a specific +sub-tree. Except for =SETUPFILE=, all other keywords listed above +have an =EXPORT_= equivalent. + +#+cindex: @samp{BIND}, keyword +#+vindex: org-export-allow-bind-keywords +If ~org-export-allow-bind-keywords~ is non-~nil~, Emacs variables can +become buffer-local during export by using the =BIND= keyword. Its +syntax is =#+BIND: variable value=. This is particularly useful for +in-buffer settings that cannot be changed using keywords. + +** Table of Contents +:PROPERTIES: +:DESCRIPTION: The if and where of the table of contents. +:END: +#+cindex: table of contents +#+cindex: list of tables +#+cindex: list of listings + +#+cindex: @samp{toc}, in @samp{OPTIONS} keyword +#+vindex: org-export-with-toc +The table of contents includes all headlines in the document. Its +depth is therefore the same as the headline levels in the file. If +you need to use a different depth, or turn it off entirely, set the +~org-export-with-toc~ variable accordingly. You can achieve the same +on a per file basis, using the following =toc= item in =OPTIONS= +keyword: + +#+begin_example +,#+OPTIONS: toc:2 (only include two levels in TOC) +,#+OPTIONS: toc:nil (no default TOC at all) +#+end_example + +#+cindex: excluding entries from table of contents +#+cindex: table of contents, exclude entries +Org includes both numbered and unnumbered headlines in the table of +contents[fn:124]. If you need to exclude an unnumbered headline, +along with all its children, set the =UNNUMBERED= property to =notoc= +value. + +#+begin_example +,* Subtree not numbered, not in table of contents either + :PROPERTIES: + :UNNUMBERED: notoc + :END: +#+end_example + +#+cindex: @samp{TOC}, keyword +Org normally inserts the table of contents directly before the first +headline of the file. To move the table of contents to a different +location, first turn off the default with ~org-export-with-toc~ +variable or with =#+OPTIONS: toc:nil=. Then insert =#+TOC: headlines +N= at the desired location(s). + +#+begin_example +,#+OPTIONS: toc:nil +... +,#+TOC: headlines 2 +#+end_example + +To adjust the table of contents depth for a specific section of the +Org document, append an additional =local= parameter. This parameter +becomes a relative depth for the current level. The following example +inserts a local table of contents, with direct children only. + +#+begin_example +,* Section +,#+TOC: headlines 1 local +#+end_example + +Note that for this feature to work properly in LaTeX export, the Org +file requires the inclusion of the titletoc package. Because of +compatibility issues, titletoc has to be loaded /before/ hyperref. +Customize the ~org-latex-default-packages-alist~ variable. + +The following example inserts a table of contents that links to the +children of the specified target. + +#+begin_example +,* Target + :PROPERTIES: + :CUSTOM_ID: TargetSection + :END: +,** Heading A +,** Heading B +,* Another section +,#+TOC: headlines 1 :target #TargetSection +#+end_example + +The =:target= attribute is supported in HTML, Markdown, ODT, and ASCII export. + +Use the =TOC= keyword to generate list of tables---respectively, all +listings---with captions. + +#+begin_example +,#+TOC: listings +,#+TOC: tables +#+end_example + +#+cindex: @samp{ALT_TITLE}, property +Normally Org uses the headline for its entry in the table of contents. +But with =ALT_TITLE= property, a different entry can be specified for +the table of contents. + +** Include Files +:PROPERTIES: +:DESCRIPTION: Include additional files into a document. +:END: +#+cindex: include files, during export +#+cindex: export, include files +#+cindex: @samp{INCLUDE}, keyword + +During export, you can include the content of another file. For +example, to include your =.emacs= file, you could use: + +: #+INCLUDE: "~/.emacs" src emacs-lisp + +#+texinfo: @noindent +The first parameter is the file name to include. The optional second +parameter specifies the block type: =example=, =export= or =src=. The +optional third parameter specifies the source code language to use for +formatting the contents. This is relevant to both =export= and =src= +block types. + +If an included file is specified as having a markup language, Org +neither checks for valid syntax nor changes the contents in any way. +For example and source blocks, Org code-escapes the contents before +inclusion. + +#+cindex: @samp{minlevel}, include +If an included file is not specified as having any markup language, +Org assumes it be in Org format and proceeds as usual with a few +exceptions. Org makes the footnote labels (see [[*Creating Footnotes]]) +in the included file local to that file. The contents of the included +file belong to the same structure---headline, item---containing the +=INCLUDE= keyword. In particular, headlines within the file become +children of the current section. That behavior can be changed by +providing an additional keyword parameter, =:minlevel=. It shifts the +headlines in the included file to become the lowest level. For +example, this syntax makes the included file a sibling of the current +top-level headline: + +: #+INCLUDE: "~/my-book/chapter2.org" :minlevel 1 + +#+cindex: @samp{lines}, include +Inclusion of only portions of files are specified using ranges +parameter with =:lines= keyword. The line at the upper end of the +range will not be included. The start and/or the end of the range may +be omitted to use the obvious defaults. + +| =#+INCLUDE: "~/.emacs" :lines "5-10"= | Include lines 5 to 10, 10 excluded | +| =#+INCLUDE: "~/.emacs" :lines "-10"= | Include lines 1 to 10, 10 excluded | +| =#+INCLUDE: "~/.emacs" :lines "10-"= | Include lines from 10 to EOF | + +Inclusions may specify a file-link to extract an object matched by +~org-link-search~[fn:125] (see [[*Search Options in File Links]]). The +ranges for =:lines= keyword are relative to the requested element. +Therefore, + +: #+INCLUDE: "./paper.org::*conclusion" :lines 1-20 + +#+texinfo: @noindent +includes the first 20 lines of the headline named =conclusion=. + +#+cindex: @samp{only-contents}, include +To extract only the contents of the matched object, set +=:only-contents= property to non-~nil~. This omits any planning lines +or property drawers. For example, to include the body of the heading +with the custom ID =theory=, you can use + +: #+INCLUDE: "./paper.org::#theory" :only-contents t + +The following command allows navigating to the included document: + +- {{{kbd(C-c ')}}} (~org-edit~special~) :: + #+kindex: C-c ' + #+findex: org-edit-special + + Visit the included file at point. + +** Macro Replacement +:PROPERTIES: +:DESCRIPTION: Use macros to create templates. +:END: +#+cindex: macro replacement, during export +#+cindex: @samp{MACRO}, keyword + +#+vindex: org-export-global-macros +Macros replace text snippets during export. Macros are defined +globally in ~org-export-global-macros~, or document-wise with the +following syntax: + +: #+MACRO: name replacement text; $1, $2 are arguments + +#+texinfo: @noindent +which can be referenced using ={{{name(arg1, arg2)}}}=[fn:126]. For +example + +#+begin_example +,#+MACRO: poem Rose is $1, violet's $2. Life's ordered: Org assists you. +{{{poem(red,blue)}}} +#+end_example + +#+texinfo: @noindent +becomes + +: Rose is red, violet's blue. Life's ordered: Org assists you. + +As a special case, Org parses any replacement text starting with +=(eval= as an Emacs Lisp expression and evaluates it accordingly. +Within such templates, arguments become strings. Thus, the following +macro + +: #+MACRO: gnustamp (eval (concat "GNU/" (capitalize $1))) + +#+texinfo: @noindent +turns ={{{gnustamp(linux)}}}= into =GNU/Linux= during export. + +Org recognizes macro references in following Org markup areas: +paragraphs, headlines, verse blocks, tables cells and lists. Org also +recognizes macro references in keywords, such as =CAPTION=, =TITLE=, +=AUTHOR=, =DATE=, and for some back-end specific export options. + +Org comes with following pre-defined macros: + +#+attr_texinfo: :sep ; +- ={{{keyword(NAME)}}}=; ={{{title}}}=; ={{{author}}}=; ={{{email}}}= :: + + #+cindex: @samp{keyword}, macro + #+cindex: @samp{title}, macro + #+cindex: @samp{author}, macro + #+cindex: @samp{email}, macro + The =keyword= macro collects all values from {{{var(NAME)}}} + keywords throughout the buffer, separated with white space. + =title=, =author= and =email= macros are shortcuts for, + respectively, ={{{keyword(TITLE)}}}=, ={{{keyword(AUTHOR)}}}= and + ={{{keyword(EMAIL)}}}=. + +- ={{{date}}}=; ={{{date(FORMAT)}}}= :: + + #+cindex: @samp{date}, macro + This macro refers to the =DATE= keyword. {{{var(FORMAT)}}} is an + optional argument to the =date= macro that is used only if =DATE= is + a single timestamp. {{{var(FORMAT)}}} should be a format string + understood by ~format-time-string~. + +- ={{{time(FORMAT)}}}=; ={{{modification-time(FORMAT, VC)}}}= :: + + #+cindex: @samp{time}, macro + #+cindex: @samp{modification-time}, macro + These macros refer to the document's date and time of export and + date and time of modification. {{{var(FORMAT)}}} is a string + understood by ~format-time-string~. If the second argument to the + ~modification-time~ macro is non-~nil~, Org uses =vc.el= to retrieve + the document's modification time from the version control system. + Otherwise Org reads the file attributes. + +- ={{{input-file}}}= :: + + #+cindex: @samp{input-file}, macro + This macro refers to the filename of the exported file. + +- ={{{property(PROPERTY-NAME)}}}=; ={{{property(PROPERTY-NAME, SEARCH OPTION)}}}= :: + + #+cindex: @samp{property}, macro + This macro returns the value of property {{{var(PROPERTY-NAME)}}} in + the current entry. If {{{var(SEARCH-OPTION)}}} (see [[*Search + Options in File Links]]) refers to a remote entry, use it instead. + +- ={{{n}}}=; ={{{n(NAME)}}}=; ={{{n(NAME, ACTION)}}}= :: + + #+cindex: @samp{n}, macro + #+cindex: counter, macro + This macro implements custom counters by returning the number of + times the macro has been expanded so far while exporting the buffer. + You can create more than one counter using different {{{var(NAME)}}} + values. If {{{var(ACTION)}}} is =-=, previous value of the counter + is held, i.e., the specified counter is not incremented. If the + value is a number, the specified counter is set to that value. If + it is any other non-empty string, the specified counter is reset + to 1. You may leave {{{var(NAME)}}} empty to reset the default + counter. + +#+cindex: @samp{results}, macro +Moreover, inline source blocks (see [[*Structure of Code Blocks]]) use the +special =results= macro to mark their output. As such, you are +advised against re-defining it, unless you know what you are doing. + +#+vindex: org-hide-macro-markers +The surrounding brackets can be made invisible by setting +~org-hide-macro-markers~ to a non-~nil~ value. + +Org expands macros at the very beginning of the export process. + +** Comment Lines +:PROPERTIES: +:DESCRIPTION: What will not be exported. +:END: +#+cindex: exporting, not + +#+cindex: comment lines +Lines starting with zero or more whitespace characters followed by one +=#= and a whitespace are treated as comments and, as such, are not +exported. + +#+cindex: @samp{BEGIN_COMMENT} +#+cindex: comment block +Likewise, regions surrounded by =#+BEGIN_COMMENT= ... =#+END_COMMENT= +are not exported. + +#+cindex: comment trees +Finally, a =COMMENT= keyword at the beginning of an entry, but after +any other keyword or priority cookie, comments out the entire subtree. +In this case, the subtree is not exported and no code block within it +is executed either[fn:127]. The command below helps changing the +comment status of a headline. + +- {{{kbd(C-c ;)}}} (~org-toggle-comment~) :: + #+kindex: C-c ; + #+findex: org-toggle-comment + + Toggle the =COMMENT= keyword at the beginning of an entry. + +** ASCII/Latin-1/UTF-8 export +:PROPERTIES: +:DESCRIPTION: Exporting to flat files with encoding. +:END: +#+cindex: ASCII export +#+cindex: Latin-1 export +#+cindex: UTF-8 export + +ASCII export produces an output file containing only plain ASCII +characters. This is the simplest and most direct text output. It +does not contain any Org markup. Latin-1 and UTF-8 export use +additional characters and symbols available in these encoding +standards. All three of these export formats offer the most basic of +text output for maximum portability. + +#+vindex: org-ascii-text-width +On export, Org fills and justifies text according to the text width +set in ~org-ascii-text-width~. + +#+vindex: org-ascii-links-to-notes +Org exports links using a footnote-like style where the descriptive +part is in the text and the link is in a note before the next heading. +See the variable ~org-ascii-links-to-notes~ for details. + +*** ASCII export commands +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+attr_texinfo: :sep , +- {{{kbd(C-c C-e t a)}}} (~org-ascii-export-to-ascii~), {{{kbd(C-c C-e t l)}}}, {{{kbd(C-c C-e t u)}}} :: + #+kindex: C-c C-e t a + #+kindex: C-c C-e t l + #+kindex: C-c C-e t u + #+findex: org-ascii-export-to-ascii + + Export as an ASCII file with a =.txt= extension. For =myfile.org=, + Org exports to =myfile.txt=, overwriting without warning. For + =myfile.txt=, Org exports to =myfile.txt.txt= in order to prevent + data loss. + +- {{{kbd(C-c C-e t A)}}} (~org-ascii-export-to-ascii~), {{{kbd(C-c C-e t L)}}}, {{{kbd(C-c C-e t U)}}} :: + #+kindex: C-c C-e t A + #+kindex: C-c C-e t L + #+kindex: C-c C-e t U + #+findex: org-ascii-export-as-ascii + + Export to a temporary buffer. Does not create a file. + +*** ASCII specific export settings +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The ASCII export back-end has one extra keyword for customizing ASCII +output. Setting this keyword works similar to the general options +(see [[*Export Settings]]). + +- =SUBTITLE= :: + + #+cindex: @samp{SUBTITLE}, keyword + The document subtitle. For long subtitles, use multiple + =#+SUBTITLE= lines in the Org file. Org prints them on one + continuous line, wrapping into multiple lines if necessary. + +*** Header and sectioning structure +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org converts the first three outline levels into headlines for ASCII +export. The remaining levels are turned into lists. To change this +cut-off point where levels become lists, see [[*Export Settings]]. + +*** Quoting ASCII text +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +To insert text within the Org file by the ASCII back-end, use one the +following constructs, inline, keyword, or export block: + +#+cindex: @samp{ASCII}, keyword +#+cindex: @samp{BEGIN_EXPORT ascii} +#+begin_example +Inline text @@ascii:and additional text@@ within a paragraph. + +,#+ASCII: Some text + +,#+BEGIN_EXPORT ascii +Org exports text in this block only when using ASCII back-end. +,#+END_EXPORT +#+end_example + +*** ASCII specific attributes +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: @samp{ATTR_ASCII}, keyword +#+cindex: horizontal rules, in ASCII export + +ASCII back-end recognizes only one attribute, =:width=, which +specifies the width of a horizontal rule in number of characters. The +keyword and syntax for specifying widths is: + +#+begin_example +,#+ATTR_ASCII: :width 10 +----- +#+end_example + +*** ASCII special blocks +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+cindex: special blocks, in ASCII export +#+cindex: @samp{BEGIN_JUSTIFYLEFT} +#+cindex: @samp{BEGIN_JUSTIFYRIGHT} + +Besides =#+BEGIN_CENTER= blocks (see [[*Paragraphs]]), ASCII back-end has +these two left and right justification blocks: + +#+begin_example +,#+BEGIN_JUSTIFYLEFT +It's just a jump to the left... +,#+END_JUSTIFYLEFT + +,#+BEGIN_JUSTIFYRIGHT +...and then a step to the right. +,#+END_JUSTIFYRIGHT +#+end_example + +** Beamer Export +:PROPERTIES: +:DESCRIPTION: Producing presentations and slides. +:END: +#+cindex: Beamer export + +Org uses Beamer export to convert an Org file tree structure into +high-quality interactive slides for presentations. Beamer is a LaTeX +document class for creating presentations in PDF, HTML, and other +popular display formats. + +*** Beamer export commands +:PROPERTIES: +:DESCRIPTION: For creating Beamer documents. +:END: + +- {{{kbd(C-c C-e l b)}}} (~org-beamer-export-to-latex~) :: + #+kindex: C-c C-e l b + #+findex: org-beamer-export-to-latex + + Export as LaTeX file with a =.tex= extension. For =myfile.org=, Org + exports to =myfile.tex=, overwriting without warning. + +- {{{kbd(C-c C-e l B)}}} (~org-beamer-export-as-latex~) :: + #+kindex: C-c C-e l B + #+findex: org-beamer-export-as-latex + + Export to a temporary buffer. Does not create a file. + +- {{{kbd(C-c C-e l P)}}} (~org-beamer-export-to-pdf~) :: + #+kindex: C-c C-e l P + #+findex: org-beamer-export-to-pdf + + Export as LaTeX file and then convert it to PDF format. + +- {{{kbd(C-c C-e l O)}}} :: + #+kindex: C-c C-e l O + + Export as LaTeX file, convert it to PDF format, and then open the + PDF file. + +*** Beamer specific export settings +:PROPERTIES: +:DESCRIPTION: For customizing Beamer export. +:END: + +Beamer export back-end has several additional keywords for customizing +Beamer output. These keywords work similar to the general options +settings (see [[*Export Settings]]). + +- =BEAMER_THEME= :: + + #+cindex: @samp{BEAMER_THEME}, keyword + #+vindex: org-beamer-theme + The Beamer layout theme (~org-beamer-theme~). Use square brackets + for options. For example: + + : #+BEAMER_THEME: Rochester [height=20pt] + +- =BEAMER_FONT_THEME= :: + + #+cindex: @samp{BEAMER_FONT_THEME}, keyword + The Beamer font theme. + +- =BEAMER_INNER_THEME= :: + + #+cindex: @samp{BEAMER_INNER_THEME}, keyword + The Beamer inner theme. + +- =BEAMER_OUTER_THEME= :: + + #+cindex: @samp{BEAMER_OUTER_THEME}, keyword + The Beamer outer theme. + +- =BEAMER_HEADER= :: + + #+cindex: @samp{BEAMER_HEADER}, keyword + Arbitrary lines inserted in the preamble, just before the =hyperref= + settings. + +- =DESCRIPTION= :: + + #+cindex: @samp{DESCRIPTION}, keyword + The document description. For long descriptions, use multiple + =DESCRIPTION= keywords. By default, =hyperref= inserts + =DESCRIPTION= as metadata. Use ~org-latex-hyperref-template~ to + configure document metadata. Use ~org-latex-title-command~ to + configure typesetting of description as part of front matter. + +- =KEYWORDS= :: + + #+cindex: @samp{KEYWORDS}, keyword + The keywords for defining the contents of the document. Use + multiple =KEYWORDS= lines if necessary. By default, =hyperref= + inserts =KEYWORDS= as metadata. Use ~org-latex-hyperref-template~ + to configure document metadata. Use ~org-latex-title-command~ to + configure typesetting of keywords as part of front matter. + +- =SUBTITLE= :: + + #+cindex: @samp{SUBTITLE}, keyword + Document's subtitle. For typesetting, use + ~org-beamer-subtitle-format~ string. Use + ~org-latex-hyperref-template~ to configure document metadata. Use + ~org-latex-title-command~ to configure typesetting of subtitle as + part of front matter. + +*** Frames and Blocks in Beamer +:PROPERTIES: +:DESCRIPTION: For composing Beamer slides. +:END: + +Org transforms heading levels into Beamer's sectioning elements, +frames and blocks. Any Org tree with a not-too-deep-level nesting +should in principle be exportable as a Beamer presentation. + +- + #+vindex: org-beamer-frame-level + Org headlines become Beamer frames when the heading level in Org is + equal to ~org-beamer-frame-level~ or =H= value in a =OPTIONS= line + (see [[*Export Settings]]). + + #+cindex: @samp{BEAMER_ENV}, property + Org overrides headlines to frames conversion for the current tree of + an Org file if it encounters the =BEAMER_ENV= property set to + =frame= or =fullframe=. Org ignores whatever + ~org-beamer-frame-level~ happens to be for that headline level in + the Org tree. In Beamer terminology, a full frame is a frame + without its title. + +- Org exports a Beamer frame's objects as block environments. Org can + enforce wrapping in special block types when =BEAMER_ENV= property + is set[fn:128]. For valid values see + ~org-beamer-environments-default~. To add more values, see + ~org-beamer-environments-extra~. + #+vindex: org-beamer-environments-default + #+vindex: org-beamer-environments-extra + +- + #+cindex: @samp{BEAMER_REF}, property + If =BEAMER_ENV= is set to =appendix=, Org exports the entry as an + appendix. When set to =note=, Org exports the entry as a note + within the frame or between frames, depending on the entry's heading + level. When set to =noteNH=, Org exports the entry as a note + without its title. When set to =againframe=, Org exports the entry + with =\againframe= command, which makes setting the =BEAMER_REF= + property mandatory because =\againframe= needs frame to resume. + + When =ignoreheading= is set, Org export ignores the entry's headline + but not its content. This is useful for inserting content between + frames. It is also useful for properly closing a =column= + environment. @end itemize + + #+cindex: @samp{BEAMER_ACT}, property + #+cindex: @samp{BEAMER_OPT}, property + When =BEAMER_ACT= is set for a headline, Org export translates that + headline as an overlay or action specification. When enclosed in + square brackets, Org export makes the overlay specification + a default. Use =BEAMER_OPT= to set any options applicable to the + current Beamer frame or block. The Beamer export back-end wraps + with appropriate angular or square brackets. It also adds the + =fragile= option for any code that may require a verbatim block. + + #+cindex: @samp{BEAMER_COL}, property + To create a column on the Beamer slide, use the =BEAMER_COL= + property for its headline in the Org file. Set the value of + =BEAMER_COL= to a decimal number representing the fraction of the + total text width. Beamer export uses this value to set the column's + width and fills the column with the contents of the Org entry. If + the Org entry has no specific environment defined, Beamer export + ignores the heading. If the Org entry has a defined environment, + Beamer export uses the heading as title. Behind the scenes, Beamer + export automatically handles LaTeX column separations for contiguous + headlines. To manually adjust them for any unique configurations + needs, use the =BEAMER_ENV= property. + +*** Beamer specific syntax +:PROPERTIES: +:DESCRIPTION: For using in Org documents. +:END: + +Since Org's Beamer export back-end is an extension of the LaTeX +back-end, it recognizes other LaTeX specific syntax---for example, +=#+LATEX:= or =#+ATTR_LATEX:=. See [[*LaTeX Export]], for details. + +Beamer export wraps the table of contents generated with =toc:t= +=OPTION= keyword in a =frame= environment. Beamer export does not +wrap the table of contents generated with =TOC= keyword (see [[*Table of +Contents]]). Use square brackets for specifying options. + +: #+TOC: headlines [currentsection] + +Insert Beamer-specific code using the following constructs: + +#+cindex: @samp{BEAMER}, keyword +#+cindex: @samp{BEGIN_EXPORT beamer} +#+begin_example +,#+BEAMER: \pause + +,#+BEGIN_EXPORT beamer + Only Beamer export back-end exports this. +,#+END_BEAMER + +Text @@beamer:some code@@ within a paragraph. +#+end_example + +Inline constructs, such as the last one above, are useful for adding +overlay specifications to objects with ~bold~, ~item~, ~link~, +~radio-target~ and ~target~ types. Enclose the value in angular +brackets and place the specification at the beginning of the object as +shown in this example: + +: A *@@beamer:<2->@@useful* feature + +#+cindex: @samp{ATTR_BEAMER}, keyword +Beamer export recognizes the =ATTR_BEAMER= keyword with the following +attributes from Beamer configurations: =:environment= for changing +local Beamer environment, =:overlay= for specifying Beamer overlays in +angular or square brackets, and =:options= for inserting optional +arguments. + +#+begin_example +,#+ATTR_BEAMER: :environment nonindentlist +- item 1, not indented +- item 2, not indented +- item 3, not indented +#+end_example + +#+begin_example +,#+ATTR_BEAMER: :overlay <+-> +- item 1 +- item 2 +#+end_example + +#+begin_example +,#+ATTR_BEAMER: :options [Lagrange] +Let $G$ be a finite group, and let $H$ be +a subgroup of $G$. Then the order of $H$ divides the order of $G$. +#+end_example + +*** Editing support +:PROPERTIES: +:DESCRIPTION: Editing support. +:END: + +Org Beamer mode is a special minor mode for faster editing of Beamer +documents. + +: #+STARTUP: beamer + +- {{{kbd(C-c C-b)}}} (~org-beamer-select-environment~) :: + #+kindex: C-c C-b + #+findex: org-beamer-select-environment + + Org Beamer mode provides this key for quicker selections in Beamer + normal environments, and for selecting the =BEAMER_COL= property. + +*** A Beamer example +:PROPERTIES: +:DESCRIPTION: A complete presentation. +:END: + +Here is an example of an Org document ready for Beamer export. + +#+begin_example +,#+TITLE: Example Presentation +,#+AUTHOR: Carsten Dominik +,#+OPTIONS: H:2 toc:t num:t +,#+LATEX_CLASS: beamer +,#+LATEX_CLASS_OPTIONS: [presentation] +,#+BEAMER_THEME: Madrid +,#+COLUMNS: %45ITEM %10BEAMER_ENV(Env) %10BEAMER_ACT(Act) %4BEAMER_COL(Col) + +,* This is the first structural section + +,** Frame 1 +,*** Thanks to Eric Fraga :B_block: + :PROPERTIES: + :BEAMER_COL: 0.48 + :BEAMER_ENV: block + :END: + for the first viable Beamer setup in Org +,*** Thanks to everyone else :B_block: + :PROPERTIES: + :BEAMER_COL: 0.48 + :BEAMER_ACT: <2-> + :BEAMER_ENV: block + :END: + for contributing to the discussion +,**** This will be formatted as a beamer note :B_note: + :PROPERTIES: + :BEAMER_env: note + :END: +,** Frame 2 (where we will not use columns) +,*** Request + Please test this stuff! +#+end_example + +** HTML Export +:PROPERTIES: +:DESCRIPTION: Exporting to HTML. +:END: +#+cindex: HTML export + +Org mode contains an HTML exporter with extensive HTML formatting +compatible with XHTML 1.0 strict standard. + +*** HTML export commands +:PROPERTIES: +:DESCRIPTION: Invoking HTML export. +:END: + +- {{{kbd(C-c C-e h h)}}} (~org-html-export-to-html~) :: + #+kindex: C-c C-e h h + #+kindex: C-c C-e h o + #+findex: org-html-export-to-html + + Export as HTML file with a =.html= extension. For =myfile.org=, Org + exports to =myfile.html=, overwriting without warning. {{{kbd(C-c + C-e h o)}}} exports to HTML and opens it in a web browser. + +- {{{kbd(C-c C-e h H)}}} (~org-html-export-as-html~) :: + #+kindex: C-c C-e h H + #+findex: org-html-export-as-html + + Exports to a temporary buffer. Does not create a file. + +*** HTML specific export settings +:PROPERTIES: +:DESCRIPTION: Settings for HTML export. +:END: + +HTML export has a number of keywords, similar to the general options +settings described in [[*Export Settings]]. + +- =DESCRIPTION= :: + + #+cindex: @samp{DESCRIPTION}, keyword + This is the document's description, which the HTML exporter inserts + it as a HTML meta tag in the HTML file. For long descriptions, use + multiple =DESCRIPTION= lines. The exporter takes care of wrapping + the lines properly. + + The exporter includes a number of other meta tags, which can be customized + by modifying ~org-html-meta-tags~. + +- =HTML_DOCTYPE= :: + + #+cindex: @samp{HTML_DOCTYPE}, keyword + #+vindex: org-html-doctype + Specify the document type, for example: HTML5 (~org-html-doctype~). + +- =HTML_CONTAINER= :: + + #+cindex: @samp{HTML_CONTAINER}, keyword + #+vindex: org-html-container-element + Specify the HTML container, such as =div=, for wrapping sections and + elements (~org-html-container-element~). + +- =HTML_LINK_HOME= :: + + #+cindex: @samp{HTML_LINK_HOME}, keyword + #+vindex: org-html-link-home + The URL for home link (~org-html-link-home~). + +- =HTML_LINK_UP= :: + + #+cindex: @samp{HTML_LINK_UP}, keyword + #+vindex: org-html-link-up + The URL for the up link of exported HTML pages (~org-html-link-up~). + +- =HTML_MATHJAX= :: + + #+cindex: @samp{HTML_MATHJAX}, keyword + #+vindex: org-html-mathjax-options + Options for MathJax (~org-html-mathjax-options~). MathJax is used + to typeset LaTeX math in HTML documents. See [[*Math formatting in + HTML export]], for an example. + +- =HTML_HEAD= :: + + #+cindex: @samp{HTML_HEAD}, keyword + #+vindex: org-html-head + Arbitrary lines for appending to the HTML document's head + (~org-html-head~). + +- =HTML_HEAD_EXTRA= :: + + #+cindex: @samp{HTML_HEAD_EXTRA}, keyword + #+vindex: org-html-head-extra + More arbitrary lines for appending to the HTML document's head + (~org-html-head-extra~). + +- =KEYWORDS= :: + + #+cindex: @samp{KEYWORDS}, keyword + Keywords to describe the document's content. HTML exporter inserts + these keywords as HTML meta tags. For long keywords, use multiple + =KEYWORDS= lines. + +- =LATEX_HEADER= :: + + #+cindex: @samp{LATEX_HEADER}, keyword + Arbitrary lines for appending to the preamble; HTML exporter appends + when transcoding LaTeX fragments to images (see [[*Math formatting in + HTML export]]). + +- =SUBTITLE= :: + + #+cindex: @samp{SUBTITLE}, keyword + The document's subtitle. HTML exporter formats subtitle if document + type is =HTML5= and the CSS has a =subtitle= class. + +Some of these keywords are explained in more detail in the following +sections of the manual. + +*** HTML doctypes +:PROPERTIES: +:DESCRIPTION: Exporting various (X)HTML flavors. +:END: + +Org can export to various (X)HTML flavors. + +#+vindex: org-html-doctype +#+vindex: org-html-doctype-alist +Set the ~org-html-doctype~ variable for different (X)HTML variants. +Depending on the variant, the HTML exporter adjusts the syntax of HTML +conversion accordingly. Org includes the following ready-made +variants: + +- ~"html4-strict"~ +- ~"html4-transitional"~ +- ~"html4-frameset"~ +- ~"xhtml-strict"~ +- ~"xhtml-transitional"~ +- ~"xhtml-frameset"~ +- ~"xhtml-11"~ +- ~"html5"~ +- ~"xhtml5"~ + +#+texinfo: @noindent +See the variable ~org-html-doctype-alist~ for details. The default is +~"xhtml-strict"~. + +#+vindex: org-html-html5-fancy +#+cindex: @samp{HTML5}, export new elements +Org's HTML exporter does not by default enable new block elements +introduced with the HTML5 standard. To enable them, set +~org-html-html5-fancy~ to non-~nil~. Or use an =OPTIONS= line in the +file to set =html5-fancy=. + +HTML5 documents can now have arbitrary =#+BEGIN= ... =#+END= blocks. +For example: + +#+begin_example +,#+BEGIN_aside + Lorem ipsum +,#+END_aside +#+end_example + +#+texinfo: @noindent +exports to: + +#+begin_src html + +#+end_src + +#+texinfo: @noindent +while this: + +#+begin_example +,#+ATTR_HTML: :controls controls :width 350 +,#+BEGIN_video +,#+HTML: +,#+HTML: +Your browser does not support the video tag. +,#+END_video +#+end_example + +#+texinfo: @noindent +exports to: + +#+begin_src html + +#+end_src + +#+vindex: org-html-html5-elements +When special blocks do not have a corresponding HTML5 element, the +HTML exporter reverts to standard translation (see +~org-html-html5-elements~). For example, =#+BEGIN_lederhosen= exports +to ~
~. + +Special blocks cannot have headlines. For the HTML exporter to wrap +the headline and its contents in ~
~ or ~
~ tags, set +the =HTML_CONTAINER= property for the headline. + +*** HTML preamble and postamble +:PROPERTIES: +:DESCRIPTION: Inserting preamble and postamble. +:END: +#+vindex: org-html-preamble +#+vindex: org-html-postamble +#+vindex: org-html-preamble-format +#+vindex: org-html-postamble-format +#+vindex: org-html-validation-link +#+vindex: org-export-creator-string +#+vindex: org-export-time-stamp-file + +The HTML exporter has delineations for preamble and postamble. The +default value for ~org-html-preamble~ is ~t~, which makes the HTML +exporter insert the preamble. See the variable +~org-html-preamble-format~ for the format string. + +Set ~org-html-preamble~ to a string to override the default format +string. If the string is a function, the HTML exporter expects the +function to return a string upon execution. The HTML exporter inserts +this string in the preamble. The HTML exporter does not insert +a preamble if ~org-html-preamble~ is set ~nil~. + +The default value for ~org-html-postamble~ is ~auto~, which makes the +HTML exporter build a postamble from looking up author's name, email +address, creator's name, and date. Set ~org-html-postamble~ to ~t~ to +insert the postamble in the format specified in the +~org-html-postamble-format~ variable. The HTML exporter does not +insert a postamble if ~org-html-postamble~ is set to ~nil~. + +*** Quoting HTML tags +:PROPERTIES: +:DESCRIPTION: Using direct HTML in Org files. +:END: + +The HTML export back-end transforms =<= and =>= to =<= and =>=. +To include raw HTML code in the Org file so the HTML export back-end +can insert that HTML code in the output, use this inline syntax: +=@@html:...@@=. For example: + +: @@html:@@bold text@@html:@@ + +#+cindex: @samp{HTML}, keyword +#+cindex: @samp{BEGIN_EXPORT html} +For larger raw HTML code blocks, use these HTML export code blocks: + +#+begin_example +,#+HTML: Literal HTML code for export + +,#+BEGIN_EXPORT html + All lines between these markers are exported literally +,#+END_EXPORT +#+end_example + +*** Headlines in HTML export +:PROPERTIES: +:DESCRIPTION: Formatting headlines. +:END: +#+cindex: headlines, in HTML export + +Headlines are exported to =

=, =

=, etc. Each headline gets the +=id= attribute from =CUSTOM_ID= property, or a unique generated value, +see [[*Internal Links]]. + +#+vindex: org-html-self-link-headlines +When ~org-html-self-link-headlines~ is set to a non-~nil~ value, the +text of the headlines is also wrapped in == tags. These tags have +a =href= attribute making the headlines link to themselves. + +*** Links in HTML export +:PROPERTIES: +:DESCRIPTION: Inserting and formatting links. +:END: +#+cindex: links, in HTML export +#+cindex: internal links, in HTML export +#+cindex: external links, in HTML export + +The HTML export back-end transforms Org's internal links (see +[[*Internal Links]]) to equivalent HTML links in the output. The back-end +similarly handles Org's automatic links created by radio targets (see +[[*Radio Targets]]) similarly. For Org links to external files, the +back-end transforms the links to /relative/ paths. + +#+vindex: org-html-link-org-files-as-html +For Org links to other =.org= files, the back-end automatically +changes the file extension to =.html= and makes file paths relative. +If the =.org= files have an equivalent =.html= version at the same +location, then the converted links should work without any further +manual intervention. However, to disable this automatic path +translation, set ~org-html-link-org-files-as-html~ to ~nil~. When +disabled, the HTML export back-end substitutes the ID-based links in +the HTML output. For more about linking files when publishing to +a directory, see [[*Publishing links]]. + +Org files can also have special directives to the HTML export +back-end. For example, by using =#+ATTR_HTML= lines to specify new +format attributes to ~~ or ~~ tags. This example shows +changing the link's title and style: + +#+cindex: @samp{ATTR_HTML}, keyword +#+begin_example +,#+ATTR_HTML: :title The Org mode homepage :style color:red; +[[https://orgmode.org]] +#+end_example + +*** Tables in HTML export +:PROPERTIES: +:DESCRIPTION: How to modify the formatting of tables. +:END: +#+cindex: tables, in HTML +#+vindex: org-export-html-table-tag + +The HTML export back-end uses ~org-html-table-default-attributes~ when +exporting Org tables to HTML. By default, the exporter does not draw +frames and cell borders. To change for this for a table, use the +following lines before the table in the Org file: + +#+cindex: @samp{CAPTION}, keyword +#+cindex: @samp{ATTR_HTML}, keyword +#+begin_example +,#+CAPTION: This is a table with lines around and between cells +,#+ATTR_HTML: :border 2 :rules all :frame border +#+end_example + +The HTML export back-end preserves column groupings in Org tables (see +[[*Column Groups]]) when exporting to HTML. + +Additional options for customizing tables for HTML export. + +- ~org-html-table-align-individual-fields~ :: + + #+vindex: org-html-table-align-individual-fields + Non-~nil~ attaches style attributes for alignment to each table + field. + +- ~org-html-table-caption-above~ :: + + #+vindex: org-html-table-caption-above + Non-~nil~ places caption string at the beginning of the table. + +- ~org-html-table-data-tags~ :: + + #+vindex: org-html-table-data-tags + Opening and ending tags for table data fields. + +- ~org-html-table-default-attributes~ :: + + #+vindex: org-html-table-default-attributes + Default attributes and values for table tags. + +- ~org-html-table-header-tags~ :: + + #+vindex: org-html-table-header-tags + Opening and ending tags for table's header fields. + +- ~org-html-table-row-tags~ :: + + #+vindex: org-html-table-row-tags + Opening and ending tags for table rows. + +- ~org-html-table-use-header-tags-for-first-column~ :: + + #+vindex: org-html-table-use-header-tags-for-first-column + Non-~nil~ formats column one in tables with header tags. + +*** Images in HTML export +:PROPERTIES: +:DESCRIPTION: How to insert figures into HTML output. +:END: +#+cindex: images, inline in HTML +#+cindex: inlining images in HTML + +The HTML export back-end has features to convert Org image links to +HTML inline images and HTML clickable image links. + +#+vindex: org-html-inline-images +When the link in the Org file has no description, the HTML export +back-end by default in-lines that image. For example: +=[[file:myimg.jpg]]= is in-lined, while =[[file:myimg.jpg][the image]]= links to the text, +=the image=. For more details, see the variable +~org-html-inline-images~. + +On the other hand, if the description part of the Org link is itself +another link, such as =file:= or =http:= URL pointing to an image, the +HTML export back-end in-lines this image and links to the main image. +This Org syntax enables the back-end to link low-resolution thumbnail +to the high-resolution version of the image, as shown in this example: + +: [[file:highres.jpg][file:thumb.jpg]] + +To change attributes of in-lined images, use =#+ATTR_HTML= lines in +the Org file. This example shows realignment to right, and adds ~alt~ +and ~title~ attributes in support of text viewers and modern web +accessibility standards. + +#+cindex: @samp{CAPTION}, keyword +#+cindex: @samp{ATTR_HTML}, keyword +#+begin_example +,#+CAPTION: A black cat stalking a spider +,#+ATTR_HTML: :alt cat/spider image :title Action! :align right +[[./img/a.jpg]] +#+end_example + +The HTML export back-end copies the =http= links from the Org file +as-is. + +*** Math formatting in HTML export +:PROPERTIES: +:DESCRIPTION: Beautiful math also on the web. +:END: +#+cindex: MathJax +#+cindex: dvipng +#+cindex: dvisvgm +#+cindex: ImageMagick + +#+vindex: org-html-mathjax-options~ +LaTeX math snippets (see [[*LaTeX fragments]]) can be displayed in two +different ways on HTML pages. The default is to use the [[https://www.mathjax.org][MathJax]], +which should work out of the box with Org[fn:129][fn:130]. Some MathJax +display options can be configured via ~org-html-mathjax-options~, or +in the buffer. For example, with the following settings, + +#+begin_example +,#+HTML_MATHJAX: align: left indent: 5em tagside: left font: Neo-Euler +,#+HTML_MATHJAX: cancel.js noErrors.js +#+end_example + +#+texinfo: @noindent +equation labels are displayed on the left margin and equations are +five em from the left margin. In addition, it loads the two MathJax +extensions =cancel.js= and =noErrors.js=[fn:131]. + +#+vindex: org-html-mathjax-template +See the docstring of ~org-html-mathjax-options~ for all supported +variables. The MathJax template can be configure via +~org-html-mathjax-template~. + +If you prefer, you can also request that LaTeX fragments are processed +into small images that will be inserted into the browser page. Before +the availability of MathJax, this was the default method for Org +files. This method requires that the dvipng program, dvisvgm or +ImageMagick suite is available on your system. You can still get this +processing with + +: #+OPTIONS: tex:dvipng + +: #+OPTIONS: tex:dvisvgm + +#+texinfo: @noindent +or + +: #+OPTIONS: tex:imagemagick + +*** Text areas in HTML export +:PROPERTIES: +:DESCRIPTION: An alternate way to show an example. +:END: + +#+cindex: text areas, in HTML +Before Org mode's Babel, one popular approach to publishing code in +HTML was by using =:textarea=. The advantage of this approach was +that copying and pasting was built into browsers with simple +JavaScript commands. Even editing before pasting was made simple. + +The HTML export back-end can create such text areas. It requires an +=#+ATTR_HTML= line as shown in the example below with the =:textarea= +option. This must be followed by either an example or a source code +block. Other Org block types do not honor the =:textarea= option. + +By default, the HTML export back-end creates a text area 80 characters +wide and height just enough to fit the content. Override these +defaults with =:width= and =:height= options on the =#+ATTR_HTML= +line. + +#+begin_example +,#+ATTR_HTML: :textarea t :width 40 +,#+BEGIN_EXAMPLE + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) +,#+END_EXAMPLE +#+end_example + +*** CSS support +:PROPERTIES: +:DESCRIPTION: Changing the appearance of the output. +:END: +#+cindex: CSS, for HTML export +#+cindex: HTML export, CSS + +#+vindex: org-export-html-todo-kwd-class-prefix +#+vindex: org-export-html-tag-class-prefix +You can modify the CSS style definitions for the exported file. The +HTML exporter assigns the following special CSS classes[fn:132] to +appropriate parts of the document---your style specifications may +change these, in addition to any of the standard classes like for +headlines, tables, etc. + +| ~p.author~ | author information, including email | +| ~p.date~ | publishing date | +| ~p.creator~ | creator info, about org mode version | +| ~.title~ | document title | +| ~.subtitle~ | document subtitle | +| ~.todo~ | TODO keywords, all not-done states | +| ~.done~ | the DONE keywords, all states that count as done | +| ~.WAITING~ | each TODO keyword also uses a class named after itself | +| ~.timestamp~ | timestamp | +| ~.timestamp-kwd~ | keyword associated with a timestamp, like =SCHEDULED= | +| ~.timestamp-wrapper~ | span around keyword plus timestamp | +| ~.tag~ | tag in a headline | +| ~._HOME~ | each tag uses itself as a class, "@" replaced by "_" | +| ~.target~ | target for links | +| ~.linenr~ | the line number in a code example | +| ~.code-highlighted~ | for highlighting referenced code lines | +| ~div.outline-N~ | div for outline level N (headline plus text) | +| ~div.outline-text-N~ | extra div for text at outline level N | +| ~.section-number-N~ | section number in headlines, different for each level | +| ~.figure-number~ | label like "Figure 1:" | +| ~.table-number~ | label like "Table 1:" | +| ~.listing-number~ | label like "Listing 1:" | +| ~div.figure~ | how to format an in-lined image | +| ~pre.src~ | formatted source code | +| ~pre.example~ | normal example | +| ~p.verse~ | verse paragraph | +| ~div.footnotes~ | footnote section headline | +| ~p.footnote~ | footnote definition paragraph, containing a footnote | +| ~.footref~ | a footnote reference number (always a ) | +| ~.footnum~ | footnote number in footnote definition (always ) | +| ~.org-svg~ | default class for a linked =.svg= image | + +#+vindex: org-html-style-default +#+vindex: org-html-head +#+vindex: org-html-head-extra +#+cindex: @samp{HTML_INCLUDE_STYLE}, keyword +The HTML export back-end includes a compact default style in each +exported HTML file. To override the default style with another style, +use these keywords in the Org file. They will replace the global +defaults the HTML exporter uses. + +#+cindex: @samp{HTML_HEAD}, keyword +#+cindex: @samp{HTML_HEAD_EXTRA}, keyword +#+begin_example +,#+HTML_HEAD: +,#+HTML_HEAD_EXTRA: +#+end_example + +#+vindex: org-html-head-include-default-style +To just turn off the default style, customize +~org-html-head-include-default-style~ variable, or use this option +line in the Org file. + +#+cindex: @samp{html-style}, @samp{OPTIONS} item +: #+OPTIONS: html-style:nil + +For longer style definitions, either use several =HTML_HEAD= and +=HTML_HEAD_EXTRA= keywords, or use ~~ blocks +around them. Both of these approaches can avoid referring to an +external file. + +#+cindex: @samp{HTML_CONTAINER_CLASS}, property +#+cindex: @samp{HTML_HEADLINE_CLASS}, property +In order to add styles to a sub-tree, use the =HTML_CONTAINER_CLASS= +property to assign a class to the tree. In order to specify CSS +styles for a particular headline, you can use the ID specified in +a =CUSTOM_ID= property. You can also assign a specific class to +a headline with the =HTML_HEADLINE_CLASS= property. + +Never change the ~org-html-style-default~ constant. Instead use other +simpler ways of customizing as described above. + +*** JavaScript supported display of web pages +:PROPERTIES: +:DESCRIPTION: Info and folding in a web browser. +:ALT_TITLE: JavaScript support +:END: + +Sebastian Rose has written a JavaScript program especially designed to +allow two different ways of viewing HTML files created with Org. One +is an /Info/-like mode where each section is displayed separately and +navigation can be done with the {{{kbd(n)}}} and {{{kbd(p)}}} keys, and some other +keys as well, press {{{kbd(?)}}} for an overview of the available keys. The +second one has a /folding/ view, much like Org provides inside Emacs. +The script is available at https://orgmode.org/org-info.js and the +documentation at https://orgmode.org/worg/code/org-info-js/. The +script is hosted on https://orgmode.org, but for reliability, prefer +installing it on your own web server. + +To use this program, just add this line to the Org file: + +#+cindex: @samp{INFOJS_OPT}, keyword +: #+INFOJS_OPT: view:info toc:nil + +#+texinfo: @noindent +The HTML header now has the code needed to automatically invoke the +script. For setting options, use the syntax from the above line for +options described below: + +- =path:= :: + + The path to the script. The default is to grab the script from + [[https://orgmode.org/org-info.js]], but you might want to have a local + copy and use a path like =../scripts/org-info.js=. + +- =view:= :: + + Initial view when the website is first shown. Possible values are: + + | =info= | Info-like interface with one section per page | + | =overview= | Folding interface, initially showing only top-level | + | =content= | Folding interface, starting with all headlines visible | + | =showall= | Folding interface, all headlines and text visible | + +- =sdepth:= :: + + Maximum headline level still considered as an independent section + for info and folding modes. The default is taken from + ~org-export-headline-levels~, i.e., the =H= switch in =OPTIONS=. If + this is smaller than in ~org-export-headline-levels~, each + info/folding section can still contain child headlines. + +- =toc:= :: + + Should the table of contents /initially/ be visible? Even when + =nil=, you can always get to the "toc" with {{{kbd(i)}}}. + +- =tdepth:= :: + + The depth of the table of contents. The defaults are taken from the + variables ~org-export-headline-levels~ and ~org-export-with-toc~. + +- =ftoc:= :: + + Does the CSS of the page specify a fixed position for the "toc"? If + yes, the toc is displayed as a section. + +- =ltoc:= :: + + Should there be short contents (children) in each section? Make + this =above= if the section should be above initial text. + +- =mouse:= :: + + Headings are highlighted when the mouse is over them. Should be + =underline= (default) or a background color like =#cccccc=. + +- =buttons:= :: + + Should view-toggle buttons be everywhere? When =nil= (the default), + only one such button is present. + +#+vindex: org-infojs-options +#+vindex: org-export-html-use-infojs +You can choose default values for these options by customizing the +variable ~org-infojs-options~. If you always want to apply the script +to your pages, configure the variable ~org-export-html-use-infojs~. + +** LaTeX Export +:PROPERTIES: +:DESCRIPTION: Exporting to @LaTeX{} and processing to PDF. +:END: +#+cindex: @LaTeX{} export +#+cindex: PDF export + +The LaTeX export back-end can handle complex documents, incorporate +standard or custom LaTeX document classes, generate documents using +alternate LaTeX engines, and produce fully linked PDF files with +indexes, bibliographies, and tables of contents, destined for +interactive online viewing or high-quality print publication. + +While the details are covered in-depth in this section, here are some +quick references to variables for the impatient: for engines, see +~org-latex-compiler~; for build sequences, see +~org-latex-pdf-process~; for packages, see +~org-latex-default-packages-alist~ and ~org-latex-packages-alist~. + +An important note about the LaTeX export back-end: it is sensitive to +blank lines in the Org document. That's because LaTeX itself depends +on blank lines to tell apart syntactical elements, such as paragraphs. + +*** LaTeX/PDF export commands +:PROPERTIES: +:DESCRIPTION: For producing @LaTeX{} and PDF documents. +:END: + +- {{{kbd(C-c C-e l l)}}} (~org-latex-export-to-latex~) :: + + #+kindex: C-c C-e l l + #+findex: org-latex-export-to-latex~ + Export to a LaTeX file with a =.tex= extension. For =myfile.org=, + Org exports to =myfile.tex=, overwriting without warning. + +- {{{kbd(C-c C-e l L)}}} (~org-latex-export-as-latex~) :: + + #+kindex: C-c C-e l L + #+findex: org-latex-export-as-latex + Export to a temporary buffer. Do not create a file. + +- {{{kbd(C-c C-e l p)}}} (~org-latex-export-to-pdf~) :: + + #+kindex: C-c C-e l p + #+findex: org-latex-export-to-pdf + Export as LaTeX file and convert it to PDF file. + +- {{{kbd(C-c C-e l o)}}} :: + + #+kindex: C-c C-e l o + Export as LaTeX file and convert it to PDF, then open the PDF using + the default viewer. + +- {{{kbd(M-x org-export-region-as-latex)}}} :: + + Convert the region to LaTeX under the assumption that it was in Org + mode syntax before. This is a global command that can be invoked in + any buffer. + +#+vindex: org-latex-compiler +#+vindex: org-latex-bibtex-compiler +#+vindex: org-latex-default-packages-alist +#+cindex: pdflatex +#+cindex: xelatex +#+cindex: lualatex +#+cindex: @samp{LATEX_COMPILER}, keyword +The LaTeX export back-end can use any of these LaTeX engines: +=pdflatex=, =xelatex=, and =lualatex=. These engines compile LaTeX +files with different compilers, packages, and output options. The +LaTeX export back-end finds the compiler version to use from +~org-latex-compiler~ variable or the =#+LATEX_COMPILER= keyword in the +Org file. See the docstring for the +~org-latex-default-packages-alist~ for loading packages with certain +compilers. Also see ~org-latex-bibtex-compiler~ to set the +bibliography compiler[fn:133]. + +*** LaTeX specific export settings +:PROPERTIES: +:DESCRIPTION: Unique to this @LaTeX{} back-end. +:END: + +The LaTeX export back-end has several additional keywords for +customizing LaTeX output. Setting these keywords works similar to the +general options (see [[*Export Settings]]). + +#+attr_texinfo: :sep , +- =DESCRIPTION= :: + #+cindex: @samp{DESCRIPTION}, keyword + #+vindex: org-latex-hyperref-template + #+vindex: org-latex-title-command + The document's description. The description along with author name, + keywords, and related file metadata are inserted in the output file + by the hyperref package. See ~org-latex-hyperref-template~ for + customizing metadata items. See ~org-latex-title-command~ for + typesetting description into the document's front matter. Use + multiple =DESCRIPTION= keywords for long descriptions. + +- =LANGUAGE= :: + #+cindex: @samp{LANGUAGE}, keyword + #+vindex: org-latex-packages-alist + In order to be effective, the =babel= or =polyglossia= + packages---according to the LaTeX compiler used---must be loaded + with the appropriate language as argument. This can be accomplished + by modifying the ~org-latex-packages-alist~ variable, e.g., with the + following snippet: + + #+begin_src emacs-lisp + (add-to-list 'org-latex-packages-alist + '("AUTO" "babel" t ("pdflatex"))) + (add-to-list 'org-latex-packages-alist + '("AUTO" "polyglossia" t ("xelatex" "lualatex"))) + #+end_src + +- =LATEX_CLASS= :: + + #+cindex: @samp{LATEX_CLASS}, keyword + #+vindex: org-latex-default-class + #+vindex: org-latex-classes + This is LaTeX document class, such as /article/, /report/, /book/, + and so on, which contain predefined preamble and headline level + mapping that the LaTeX export back-end needs. The back-end reads + the default class name from the ~org-latex-default-class~ variable. + Org has /article/ as the default class. A valid default class must + be an element of ~org-latex-classes~. + +- =LATEX_CLASS_OPTIONS= :: + + #+cindex: @samp{LATEX_CLASS_OPTIONS}, keyword + Options the LaTeX export back-end uses when calling the LaTeX + document class. + +- =LATEX_COMPILER= :: + + #+cindex: @samp{LATEX_COMPILER}, keyword + #+vindex: org-latex-compiler + The compiler, such as =pdflatex=, =xelatex=, =lualatex=, for + producing the PDF. See ~org-latex-compiler~. + +- =LATEX_HEADER=, =LATEX_HEADER_EXTRA= :: + + #+cindex: @samp{LATEX_HEADER}, keyword + #+cindex: @samp{LATEX_HEADER_EXTRA}, keyword + #+vindex: org-latex-classes + Arbitrary lines to add to the document's preamble, before the + hyperref settings. See ~org-latex-classes~ for adjusting the + structure and order of the LaTeX headers. + +- =KEYWORDS= :: + + #+cindex: @samp{KEYWORDS}, keyword + #+vindex: org-latex-hyperref-template + #+vindex: org-latex-title-command + The keywords for the document. The description along with author + name, keywords, and related file metadata are inserted in the output + file by the hyperref package. See ~org-latex-hyperref-template~ for + customizing metadata items. See ~org-latex-title-command~ for + typesetting description into the document's front matter. Use + multiple =KEYWORDS= lines if necessary. + +- =SUBTITLE= :: + + #+cindex: @samp{SUBTITLE}, keyword + #+vindex: org-latex-subtitle-separate + #+vindex: org-latex-subtitle-format + The document's subtitle. It is typeset as per + ~org-latex-subtitle-format~. If ~org-latex-subtitle-separate~ is + non-~nil~, it is typed outside of the ~\title~ macro. See + ~org-latex-hyperref-template~ for customizing metadata items. See + ~org-latex-title-command~ for typesetting description into the + document's front matter. + +The following sections have further details. + +*** LaTeX header and sectioning structure +:PROPERTIES: +:DESCRIPTION: Setting up the export file structure. +:ALT_TITLE: LaTeX header and sectioning +:END: +#+cindex: @LaTeX{} class +#+cindex: @LaTeX{} sectioning structure +#+cindex: @LaTeX{} header +#+cindex: header, for @LaTeX{} files +#+cindex: sectioning structure, for @LaTeX{} export + +The LaTeX export back-end converts the first three of Org's outline +levels into LaTeX headlines. The remaining Org levels are exported as +lists. To change this globally for the cut-off point between levels +and lists, (see [[*Export Settings]]). + +By default, the LaTeX export back-end uses the /article/ class. + +#+vindex: org-latex-default-class +#+vindex: org-latex-classes +#+vindex: org-latex-default-packages-alist +#+vindex: org-latex-packages-alist +To change the default class globally, edit ~org-latex-default-class~. +To change the default class locally in an Org file, add option lines +=#+LATEX_CLASS: myclass=. To change the default class for just a part +of the Org file, set a sub-tree property, =EXPORT_LATEX_CLASS=. The +class name entered here must be valid member of ~org-latex-classes~. +This variable defines a header template for each class into which the +exporter splices the values of ~org-latex-default-packages-alist~ and +~org-latex-packages-alist~. Use the same three variables to define +custom sectioning or custom classes. + +#+cindex: @samp{LATEX_CLASS}, keyword +#+cindex: @samp{LATEX_CLASS_OPTIONS}, keyword +#+cindex: @samp{EXPORT_LATEX_CLASS}, property +#+cindex: @samp{EXPORT_LATEX_CLASS_OPTIONS}, property +The LaTeX export back-end sends the =LATEX_CLASS_OPTIONS= keyword and +=EXPORT_LATEX_CLASS_OPTIONS= property as options to the LaTeX +~\documentclass~ macro. The options and the syntax for specifying +them, including enclosing them in square brackets, follow LaTeX +conventions. + +: #+LATEX_CLASS_OPTIONS: [a4paper,11pt,twoside,twocolumn] + +#+cindex: @samp{LATEX_HEADER}, keyword +#+cindex: @samp{LATEX_HEADER_EXTRA}, keyword +The LaTeX export back-end appends values from =LATEX_HEADER= and +=LATEX_HEADER_EXTRA= keywords to the LaTeX header. The docstring for +~org-latex-classes~ explains in more detail. Also note that LaTeX +export back-end does not append =LATEX_HEADER_EXTRA= to the header +when previewing LaTeX snippets (see [[*Previewing LaTeX fragments]]). + +A sample Org file with the above headers: + +#+begin_example +,#+LATEX_CLASS: article +,#+LATEX_CLASS_OPTIONS: [a4paper] +,#+LATEX_HEADER: \usepackage{xyz} + +,* Headline 1 + some text +,* Headline 2 + some more text +#+end_example + +*** Quoting LaTeX code +:PROPERTIES: +:DESCRIPTION: Incorporating literal @LaTeX{} code. +:END: + +The LaTeX export back-end can insert any arbitrary LaTeX code, see +[[*Embedded LaTeX]]. There are three ways to embed such code in the Org +file and they all use different quoting syntax. + +#+cindex: inline, in @LaTeX{} export +Inserting in-line quoted with @ symbols: + +: Code embedded in-line @@latex:any arbitrary LaTeX code@@ in a paragraph. + +#+cindex: @samp{LATEX}, keyword +Inserting as one or more keyword lines in the Org file: + +: #+LATEX: any arbitrary LaTeX code + +#+cindex: @samp{BEGIN_EXPORT latex} +Inserting as an export block in the Org file, where the back-end +exports any code between begin and end markers: + +#+begin_example +,#+BEGIN_EXPORT latex + any arbitrary LaTeX code +,#+END_EXPORT +#+end_example + +*** Tables in LaTeX export +:PROPERTIES: +:DESCRIPTION: Options for exporting tables to @LaTeX{}. +:END: +#+cindex: tables, in @LaTeX{} export + +The LaTeX export back-end can pass several LaTeX attributes for table +contents and layout. Besides specifying a label (see [[*Internal Links]]) +and a caption (see [[*Captions]]), the other valid LaTeX attributes +include: + +#+attr_texinfo: :sep , +- =:mode= :: + + #+vindex: org-latex-default-table-mode + The LaTeX export back-end wraps the table differently depending on + the mode for accurate rendering of math symbols. Mode is either + =table=, =math=, =inline-math= or =verbatim=. + + For =math= or =inline-math= mode, LaTeX export back-end wraps the + table in a math environment, but every cell in it is exported as-is. + The LaTeX export back-end determines the default mode from + ~org-latex-default-table-mode~. The LaTeX export back-end merges + contiguous tables in the same mode into a single environment. + +- =:environment= :: + + #+vindex: org-latex-default-table-environment + Set the default LaTeX table environment for the LaTeX export + back-end to use when exporting Org tables. Common LaTeX table + environments are provided by these packages: tabularx, longtable, + array, tabu, and bmatrix. For packages, such as tabularx and tabu, + or any newer replacements, include them in the + ~org-latex-packages-alist~ variable so the LaTeX export back-end can + insert the appropriate load package headers in the converted LaTeX + file. Look in the docstring for the ~org-latex-packages-alist~ + variable for configuring these packages for LaTeX snippet previews, + if any. + +- =:caption= :: + + Use =CAPTION= keyword to set a simple caption for a table (see + [[*Captions]]). For custom captions, use =:caption= attribute, which + accepts raw LaTeX code. =:caption= value overrides =CAPTION= value. + +- =:float=, =:placement= :: + + The table environments by default are not floats in LaTeX. To make + them floating objects use =:float= with one of the following + options: =sideways=, =multicolumn=, =t=, and =nil=. + + LaTeX floats can also have additional layout =:placement= + attributes. These are the usual =[h t b p ! H]= permissions + specified in square brackets. Note that for =:float sideways= + tables, the LaTeX export back-end ignores =:placement= attributes. + +- =:align=, =:font=, =:width= :: + + The LaTeX export back-end uses these attributes for regular tables + to set their alignments, fonts, and widths. + +- =:spread= :: + + When =:spread= is non-~nil~, the LaTeX export back-end spreads or + shrinks the table by the =:width= for tabu and longtabu + environments. =:spread= has no effect if =:width= is not set. + +- =:booktabs=, =:center=, =:rmlines= :: + + #+vindex: org-latex-tables-booktabs + #+vindex: org-latex-tables-centered + All three commands are toggles. =:booktabs= brings in modern + typesetting enhancements to regular tables. The booktabs package + has to be loaded through ~org-latex-packages-alist~. =:center= is + for centering the table. =:rmlines= removes all but the very first + horizontal line made of ASCII characters from "table.el" tables + only. + +- =:math-prefix=, =:math-suffix=, =:math-arguments= :: + + The LaTeX export back-end inserts =:math-prefix= string value in + a math environment before the table. The LaTeX export back-end + inserts =:math-suffix= string value in a math environment after the + table. The LaTeX export back-end inserts =:math-arguments= string + value between the macro name and the table's contents. + =:math-arguments= comes in use for matrix macros that require more + than one argument, such as =qbordermatrix=. + +LaTeX table attributes help formatting tables for a wide range of +situations, such as matrix product or spanning multiple pages: + +#+begin_example +,#+ATTR_LATEX: :environment longtable :align l|lp{3cm}r|l +| ... | ... | +| ... | ... | + +,#+ATTR_LATEX: :mode math :environment bmatrix :math-suffix \times +| a | b | +| c | d | +,#+ATTR_LATEX: :mode math :environment bmatrix +| 1 | 2 | +| 3 | 4 | +#+end_example + +Set the caption with the LaTeX command +=\bicaption{HeadingA}{HeadingB}=: + +#+begin_example +,#+ATTR_LATEX: :caption \bicaption{HeadingA}{HeadingB} +| ... | ... | +| ... | ... | +#+end_example + +*** Images in LaTeX export +:PROPERTIES: +:DESCRIPTION: How to insert figures into @LaTeX{} output. +:END: +#+cindex: images, inline in LaTeX +#+cindex: inlining images in LaTeX +#+cindex: @samp{ATTR_LATEX}, keyword + +The LaTeX export back-end processes image links in Org files that do +not have descriptions, such as these links =[[file:img.jpg]]= or +=[[./img.jpg]]=, as direct image insertions in the final PDF output. In +the PDF, they are no longer links but actual images embedded on the +page. The LaTeX export back-end uses =\includegraphics= macro to +insert the image. But for TikZ (http://sourceforge.net/projects/pgf/) +images, the back-end uses an ~\input~ macro wrapped within +a ~tikzpicture~ environment. + +For specifying image =:width=, =:height=, =:scale= and other =:options=, +use this syntax: + +#+begin_example +,#+ATTR_LATEX: :width 5cm :options angle=90 +[[./img/sed-hr4049.pdf]] +#+end_example + +A =:scale= attribute overrides both =:width= and =:height= attributes. + +For custom commands for captions, use the =:caption= attribute. It +overrides the default =#+CAPTION= value: + +#+begin_example +,#+ATTR_LATEX: :caption \bicaption{HeadingA}{HeadingB} +[[./img/sed-hr4049.pdf]] +#+end_example + +When captions follow the method as described in [[*Captions]], the LaTeX +export back-end wraps the picture in a floating =figure= environment. +To float an image without specifying a caption, set the =:float= +attribute to one of the following: + +- =t= :: + + For a standard =figure= environment; used by default whenever an + image has a caption. + +- =multicolumn= :: + + To span the image across multiple columns of a page; the back-end + wraps the image in a =figure*= environment. + +- =wrap= :: + + For text to flow around the image on the right; the figure occupies + the left half of the page. + +- =sideways= :: + + For a new page with the image sideways, rotated ninety degrees, in + a =sidewaysfigure= environment; overrides =:placement= setting. + +- =nil= :: + + To avoid a =:float= even if using a caption. + +Use the =placement= attribute to modify a floating environment's +placement. + +#+begin_example +,#+ATTR_LATEX: :float wrap :width 0.38\textwidth :placement {r}{0.4\textwidth} +[[./img/hst.png]] +#+end_example + +#+vindex: org-latex-images-centered +#+cindex: center image in LaTeX export +#+cindex: image, centering in LaTeX export +The LaTeX export back-end centers all images by default. Setting +=:center= to =nil= disables centering. To disable centering globally, +set ~org-latex-images-centered~ to =nil=. + +Set the =:comment-include= attribute to non-~nil~ value for the LaTeX +export back-end to comment out the =\includegraphics= macro. + +*** Plain lists in LaTeX export +:PROPERTIES: +:DESCRIPTION: Attributes specific to lists. +:END: + +#+cindex: plain lists, in @LaTeX{} export +#+cindex: @samp{ATTR_LATEX}, keyword +The LaTeX export back-end accepts the =environment= and =options= +attributes for plain lists. Both attributes work together for +customizing lists, as shown in the examples: + +#+begin_example +,#+LATEX_HEADER: \usepackage[inline]{enumitem} +Some ways to say "Hello": +,#+ATTR_LATEX: :environment itemize* +,#+ATTR_LATEX: :options [label={}, itemjoin={,}, itemjoin*={, and}] +- Hola +- Bonjour +- Guten Tag. +#+end_example + +Since LaTeX supports only four levels of nesting for lists, use an +external package, such as =enumitem= in LaTeX, for levels deeper than +four: + +#+begin_example +,#+LATEX_HEADER: \usepackage{enumitem} +,#+LATEX_HEADER: \renewlist{itemize}{itemize}{9} +,#+LATEX_HEADER: \setlist[itemize]{label=$\circ$} +- One + - Two + - Three + - Four + - Five +#+end_example + +*** Source blocks in LaTeX export +:PROPERTIES: +:DESCRIPTION: Attributes specific to source code blocks. +:END: +#+cindex: source blocks, in @LaTeX{} export +#+cindex: @samp{ATTR_LATEX}, keyword + +The LaTeX export back-end can make source code blocks into floating +objects through the attributes =:float= and =:options=. For =:float=: + +- =t= :: + + Makes a source block float; by default floats any source block with + a caption. + +- =multicolumn= :: + + Spans the source block across multiple columns of a page. + +- =nil= :: + + Avoids a =:float= even if using a caption; useful for source code + blocks that may not fit on a page. + +#+begin_example +,#+ATTR_LATEX: :float nil +,#+BEGIN_SRC emacs-lisp + Lisp code that may not fit in a single page. +,#+END_SRC +#+end_example + +#+vindex: org-latex-listings-options +#+vindex: org-latex-minted-options +The LaTeX export back-end passes string values in =:options= to LaTeX +packages for customization of that specific source block. In the +example below, the =:options= are set for Minted. Minted is a source +code highlighting LaTeX package with many configurable options[fn:134]. + +#+begin_example +,#+ATTR_LATEX: :options commentstyle=\bfseries +,#+BEGIN_SRC emacs-lisp + (defun Fib (n) + (if (< n 2) n (+ (Fib (- n 1)) (Fib (- n 2))))) +,#+END_SRC +#+end_example + +To apply similar configuration options for all source blocks in +a file, use the ~org-latex-listings-options~ and +~org-latex-minted-options~ variables. + +*** Example blocks in LaTeX export +:PROPERTIES: +:DESCRIPTION: Attributes specific to example blocks. +:END: +#+cindex: example blocks, in @LaTeX{} export +#+cindex: verbatim blocks, in @LaTeX{} export +#+cindex: @samp{ATTR_LATEX}, keyword + +The LaTeX export back-end wraps the contents of example blocks in +a =verbatim= environment. To change this behavior to use another +environment globally, specify an appropriate export filter (see +[[*Advanced Export Configuration]]). To change this behavior to use +another environment for each block, use the =:environment= parameter +to specify a custom environment. + +#+begin_example +,#+ATTR_LATEX: :environment myverbatim +,#+BEGIN_EXAMPLE + This sentence is false. +,#+END_EXAMPLE +#+end_example + +*** Special blocks in LaTeX export +:PROPERTIES: +:DESCRIPTION: Attributes specific to special blocks. +:END: + +#+cindex: special blocks, in @LaTeX{} export +#+cindex: abstract, in @LaTeX{} export +#+cindex: proof, in @LaTeX{} export +#+cindex: @samp{ATTR_LATEX}, keyword + +For other special blocks in the Org file, the LaTeX export back-end +makes a special environment of the same name. The back-end also takes +=:options=, if any, and appends as-is to that environment's opening +string. For example: + +#+begin_example +,#+BEGIN_abstract + We demonstrate how to solve the Syracuse problem. +,#+END_abstract + +,#+ATTR_LATEX: :options [Proof of important theorem] +,#+BEGIN_proof + ... + Therefore, any even number greater than 2 is the sum of two primes. +,#+END_proof +#+end_example + +#+texinfo: @noindent +exports to + +#+begin_example +\begin{abstract} + We demonstrate how to solve the Syracuse problem. +\end{abstract} + +\begin{proof}[Proof of important theorem] + ... + Therefore, any even number greater than 2 is the sum of two primes. +\end{proof} +#+end_example + +If you need to insert a specific caption command, use =:caption= +attribute. It overrides standard =CAPTION= value, if any. For +example: + +#+begin_example +,#+ATTR_LATEX: :caption \MyCaption{HeadingA} +,#+BEGIN_proof + ... +,#+END_proof +#+end_example + +*** Horizontal rules in LaTeX export +:PROPERTIES: +:DESCRIPTION: Attributes specific to horizontal rules. +:END: +#+cindex: horizontal rules, in @LaTeX{} export +#+cindex: @samp{ATTR_LATEX}, keyword + +The LaTeX export back-end converts horizontal rules by the specified +=:width= and =:thickness= attributes. For example: + +#+begin_example +,#+ATTR_LATEX: :width .6\textwidth :thickness 0.8pt +----- +#+end_example + +*** Verse blocks in LaTeX export +:PROPERTIES: +:DESCRIPTION: Attributes specific to special blocks. +:END: + +#+cindex: verse blocks, in @LaTeX{} export +#+cindex: @samp{ATTR_LATEX}, keyword + +The LaTeX export back-end accepts four attributes for verse blocks: +=:lines=, =:center=, =:versewidth= and =:latexcode=. The three first +require the external LaTeX package =verse.sty=, which is an extension +of the standard LaTeX environment. + +- =:lines= :: To add marginal verse numbering. Its value is an + integer, the sequence in which the verses should be numbered. +- =:center= :: With value =t= all the verses on the page are optically + centered (a typographic convention for poetry), taking as a + reference the longest verse, which must be indicated by the + attribute =:versewidth=. +- =:versewidth= :: Its value is a literal text string with the longest + verse. +- =:latexcode= :: It accepts any arbitrary LaTeX code that can be + included within a LaTeX =verse= environment. + +A complete example with Shakespeare's first sonnet: + +#+begin_src org +,#+ATTR_LATEX: :center t :latexcode \color{red} :lines 5 +,#+ATTR_LATEX: :versewidth Feed’st thy light’s flame with self-substantial fuel, +,#+BEGIN_VERSE +From fairest creatures we desire increase, +That thereby beauty’s rose might never die, +But as the riper should by time decease +His tender heir might bear his memory +But thou, contracted to thine own bright eyes, +Feed’st thy light’s flame with self-substantial fuel, +Making a famine where abundance lies, +Thyself thy foe, to thy sweet self too cruel. +Thou that art now the world’s fresh ornament, +And only herald to the gaudy spring, +Within thine own bud buriest thy content, +And, tender churl, mak’st waste in niggardly. +Pity the world, or else this glutton be, +To eat the world’s due, by the grave and thee. +,#+END_VERSE +#+end_src + +*** Quote blocks in LaTeX export +:PROPERTIES: +:DESCRIPTION: Attributes specific to quote blocks. +:END: + +#+cindex: quote blocks, in @LaTeX{} export +#+cindex: @samp{ATTR_LATEX}, keyword +#+cindex: org-latex-default-quote-environment + +The LaTeX export back-end accepts two attributes for quote blocks: +=:environment=, for an arbitrary quoting environment (the default +value is that of ~org-latex-default-quote-environment~: ~"quote"~) and +=:options=. For example, to choose the environment =quotation=, +included as an alternative to =quote= in standard LaTeX classes: + +#+begin_example +,#+ATTR_LATEX: :environment quotation +,#+BEGIN_QUOTE +some text... +,#+END_QUOTE +#+end_example + +To choose the =foreigndisplayquote= environment, included in the LaTeX +package =csquotes=, with the =german= option, use this syntax: + +#+begin_example +,#+LATEX_HEADER:\usepackage[autostyle=true]{csquotes} +,#+ATTR_LATEX: :environment foreigndisplayquote :options {german} +,#+BEGIN_QUOTE +some text in German... +,#+END_QUOTE +#+end_example + +#+texinfo: @noindent +which is exported to LaTeX as + +#+begin_example +\begin{foreigndisplayquote}{german} +some text in German... +\end{foreigndisplayquote} +#+end_example + +** Markdown Export +:PROPERTIES: +:DESCRIPTION: Exporting to Markdown. +:END: +#+cindex: Markdown export + +The Markdown export back-end, "md", converts an Org file to Markdown +format, as defined at http://daringfireball.net/projects/markdown/. + +Since it is built on top of the HTML back-end (see [[*HTML Export]]), it +converts every Org construct not defined in Markdown syntax, such as +tables, to HTML. + +*** Markdown export commands +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c C-e m m)}}} (~org-md-export-to-markdown~) :: + + #+kindex: C-c C-c m m + #+findex: org-md-export-to-markdown + Export to a text file with Markdown syntax. For =myfile.org=, Org + exports to =myfile.md=, overwritten without warning. + +- {{{kbd(C-c C-e m M)}}} (~org-md-export-as-markdown~) :: + + #+kindex: C-c C-c m M + #+findex: org-md-export-as-markdown + Export to a temporary buffer. Does not create a file. + +- {{{kbd(C-c C-e m o)}}} :: + + #+kindex: C-c C-e m o + Export as a text file with Markdown syntax, then open it. + +*** Header and sectioning structure +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+vindex: org-md-headline-style +Based on ~org-md-headline-style~, Markdown export can generate +headlines of both /atx/ and /setext/ types. /atx/ limits headline +levels to two whereas /setext/ limits headline levels to six. Beyond +these limits, the export back-end converts headlines to lists. To set +a limit to a level before the absolute limit (see [[*Export Settings]]). + +** OpenDocument Text Export +:PROPERTIES: +:DESCRIPTION: Exporting to OpenDocument Text. +:END: +#+cindex: ODT +#+cindex: OpenDocument +#+cindex: export, OpenDocument +#+cindex: LibreOffice + +The ODT export back-end handles creating of OpenDocument Text (ODT) +format. Documents created by this exporter use the +{{{cite(OpenDocument-v1.2 specification)}}}[fn:135] and are compatible +with LibreOffice 3.4. + +*** Pre-requisites for ODT export +:PROPERTIES: +:DESCRIPTION: Required packages. +:END: +#+cindex: zip + +The ODT export back-end relies on the zip program to create the final +compressed ODT output. Check if =zip= is locally available and +executable. Without it, export cannot finish. + +*** ODT export commands +:PROPERTIES: +:DESCRIPTION: Invoking export. +:END: + +- {{{kbd(C-c C-e o o)}}} (~org-export-to-odt~) :: + + #+kindex: C-c C-e o o + #+findex: org-export-to-odt + Export as OpenDocument Text file. + + #+cindex: @samp{EXPORT_FILE_NAME}, property + #+vindex: org-odt-preferred-output-format + + If ~org-odt-preferred-output-format~ is specified, the ODT export + back-end automatically converts the exported file to that format. + + For =myfile.org=, Org exports to =myfile.odt=, overwriting without + warning. The ODT export back-end exports a region only if a region + was active. + + If the selected region is a single tree, the ODT export back-end + makes the tree head the document title. Incidentally, {{{kbd(C-c + @)}}} selects the current sub-tree. If the tree head entry has, or + inherits, an =EXPORT_FILE_NAME= property, the ODT export back-end + uses that for file name. + +- {{{kbd(C-c C-e o O)}}} :: + + #+kindex: C-c C-e o O + Export as an OpenDocument Text file and open the resulting file. + + #+vindex: org-export-odt-preferred-output-format + If ~org-export-odt-preferred-output-format~ is specified, open the + converted file instead. See [[*Automatically exporting to other + formats]]. + +*** ODT specific export settings +:PROPERTIES: +:DESCRIPTION: Configuration options. +:END: + +The ODT export back-end has several additional keywords for +customizing ODT output. Setting these keywords works similar to the +general options (see [[*Export Settings]]). + +- =DESCRIPTION= :: + + #+cindex: @samp{DESCRIPTION}, keyword + This is the document's description, which the ODT export back-end + inserts as document metadata. For long descriptions, use multiple + lines, prefixed with =DESCRIPTION=. + +- =KEYWORDS= :: + + #+cindex: @samp{KEYWORDS}, keyword + The keywords for the document. The ODT export back-end inserts the + description along with author name, keywords, and related file + metadata as metadata in the output file. Use multiple =KEYWORDS= if + necessary. + +- =ODT_STYLES_FILE= :: + + #+cindex: @samp{ODT_STYLES_FILE}, keyword + #+vindex: org-odt-styles-file + The ODT export back-end uses the ~org-odt-styles-file~ by default. + See [[*Applying custom styles]] for details. + +- =SUBTITLE= :: + + #+cindex: @samp{SUBTITLE}, keyword + The document subtitle. + +*** Extending ODT export +:PROPERTIES: +:DESCRIPTION: Producing DOC, PDF files. +:END: + +The ODT export back-end can produce documents in other formats besides +ODT using a specialized ODT converter process. Its common interface +works with popular converters to produce formats such as =doc=, or +convert a document from one format, say =csv=, to another format, say +=xls=. + +#+cindex: @file{unoconv} +#+vindex: org-odt-convert-process +Customize ~org-odt-convert-process~ variable to point to =unoconv=, +which is the ODT's preferred converter. Working installations of +LibreOffice would already have =unoconv= installed. Alternatively, +other converters may be substituted here. See [[*Configuring +a document converter]]. + +**** Automatically exporting to other formats +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+vindex: org-odt-preferred-output-format +If ODT format is just an intermediate step to get to other formats, +such as =doc=, =docx=, =rtf=, or =pdf=, etc., then extend the ODT +export back-end to directly produce that format. Specify the final +format in the ~org-odt-preferred-output-format~ variable. This is one +way to extend (see [[*ODT export commands]]). + +**** Converting between document formats +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The Org export back-end is made to be inter-operable with a wide range +of text document format converters. Newer generation converters, such +as LibreOffice and Pandoc, can handle hundreds of formats at once. +Org provides a consistent interaction with whatever converter is +installed. Here are some generic commands: + +- {{{kbd(M-x org-odt-convert)}}} :: + + #+findex: org-odt-convert + Convert an existing document from one format to another. With + a prefix argument, opens the newly produced file. + +*** Applying custom styles +:PROPERTIES: +:DESCRIPTION: Styling the output. +:END: +#+cindex: styles, custom +#+cindex: template, custom + +The ODT export back-end comes with many OpenDocument styles (see +[[*Working with OpenDocument style files]]). To expand or further +customize these built-in style sheets, either edit the style sheets +directly or generate them using an application such as LibreOffice. +The example here shows creating a style using LibreOffice. + +**** Applying custom styles: the easy way +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +1. Create a sample =example.org= file with settings as shown below, + and export it to ODT format. + + : #+OPTIONS: H:10 num:t + +2. Open the above =example.odt= using LibreOffice. Use the /Stylist/ + to locate the target styles, which typically have the "Org" prefix. + Open one, modify, and save as either OpenDocument Text (ODT) or + OpenDocument Template (OTT) file. + +3. + #+vindex: org-odt-styles-file + Customize the variable ~org-odt-styles-file~ and point it to the + newly created file. For additional configuration options, see + [[x-overriding-factory-styles][Overriding factory styles]]. + + #+cindex: @samp{ODT_STYLES_FILE}, keyword + To apply an ODT style to a particular file, use the + =ODT_STYLES_FILE= keyword as shown in the example below: + + : #+ODT_STYLES_FILE: "/path/to/example.ott" + + #+texinfo: @noindent + or + + : #+ODT_STYLES_FILE: ("/path/to/file.ott" ("styles.xml" "image/hdr.png")) + +**** Using third-party styles and templates +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The ODT export back-end relies on many templates and style names. +Using third-party styles and templates can lead to mismatches. +Templates derived from built in ODT templates and styles seem to have +fewer problems. + +*** Links in ODT export +:PROPERTIES: +:DESCRIPTION: Handling and formatting links. +:END: +#+cindex: links, in ODT export + +ODT exporter creates native cross-references for internal links. It +creates Internet-style links for all other links. + +A link with no description and pointing to a regular, un-itemized, +outline heading is replaced with a cross-reference and section number +of the heading. + +A =\ref{label}=-style reference to an image, table etc., is replaced +with a cross-reference and sequence number of the labeled entity. See +[[*Labels and captions in ODT export]]. + +*** Tables in ODT export +:PROPERTIES: +:DESCRIPTION: Org tables conversions. +:END: + +#+cindex: tables, in ODT export + +The ODT export back-end handles native Org mode tables (see [[*Tables]]) +and simple =table.el= tables. Complex =table.el= tables having column +or row spans are not supported. Such tables are stripped from the +exported document. + +By default, the ODT export back-end exports a table with top and +bottom frames and with ruled lines separating row and column groups +(see [[*Column Groups]]). All tables are typeset to occupy the same +width. The ODT export back-end honors any table alignments and +relative widths for columns (see [[*Column Width and Alignment]]). + +Note that the ODT export back-end interprets column widths as weighted +ratios, the default weight being 1. + +#+cindex: @samp{ATTR_ODT}, keyword +Specifying =:rel-width= property on an =ATTR_ODT= line controls the +width of the table. For example: + +#+begin_example +,#+ATTR_ODT: :rel-width 50 +| Area/Month | Jan | Feb | Mar | Sum | +|---------------+-------+-------+-------+-------| +| / | < | | | < | +| | | | | | +| North America | 1 | 21 | 926 | 948 | +| Middle East | 6 | 75 | 844 | 925 | +| Asia Pacific | 9 | 27 | 790 | 826 | +|---------------+-------+-------+-------+-------| +| Sum | 16 | 123 | 2560 | 2699 | +#+end_example + +On export, the above table takes 50% of text width area. The exporter +sizes the columns in the ratio: 13:5:5:5:6. The first column is +left-aligned and rest of the columns, right-aligned. Vertical rules +separate the header and the last column. Horizontal rules separate +the header and the last row. + +For even more customization, create custom table styles and associate +them with a table using the =ATTR_ODT= keyword. See [[*Customizing +tables in ODT export]]. + +*** Images in ODT export +:PROPERTIES: +:DESCRIPTION: Inserting images. +:END: +#+cindex: images, embedding in ODT +#+cindex: embedding images in ODT + +**** Embedding images +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The ODT export back-end processes image links in Org files that do not +have descriptions, such as these links =[[file:img.jpg]]= or =[[./img.jpg]]=, +as direct image insertions in the final output. Either of these +examples works: + +: [[file:img.png]] + +: [[./img.png]] + +**** Embedding clickable images +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +For clickable images, provide a link whose description is another link +to an image file. For example, to embed an image +=org-mode-unicorn.png= which when clicked jumps to https://orgmode.org +website, do the following + +: [[https://orgmode.org][./org-mode-unicorn.png]] + +**** Sizing and scaling of embedded images +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: @samp{ATTR_ODT}, keyword + +Control the size and scale of the embedded images with the =ATTR_ODT= +attribute. + +#+cindex: identify, ImageMagick +#+vindex: org-odt-pixels-per-inch +The ODT export back-end starts with establishing the size of the image +in the final document. The dimensions of this size are measured in +centimeters. The back-end then queries the image file for its +dimensions measured in pixels. For this measurement, the back-end +relies on ImageMagick's identify program or Emacs ~create-image~ and +~image-size~ API. ImageMagick is the preferred choice for large file +sizes or frequent batch operations. The back-end then converts the +pixel dimensions using ~org-odt-pixels-per-inch~ into the familiar 72 +dpi or 96 dpi. The default value for this is in +~display-pixels-per-inch~, which can be tweaked for better results +based on the capabilities of the output device. Here are some common +image scaling operations: + +- Explicitly size the image :: + + To embed =img.png= as a 10 cm x 10 cm image, do the following: + + #+begin_example + ,#+ATTR_ODT: :width 10 :height 10 + [[./img.png]] + #+end_example + +- Scale the image :: + + To embed =img.png= at half its size, do the following: + + #+begin_example + ,#+ATTR_ODT: :scale 0.5 + [[./img.png]] + #+end_example + +- Scale the image to a specific width :: + + To embed =img.png= with a width of 10 cm while retaining the + original height:width ratio, do the following: + + #+begin_example + ,#+ATTR_ODT: :width 10 + [[./img.png]] + #+end_example + +- Scale the image to a specific height :: + + To embed =img.png= with a height of 10 cm while retaining the + original height:width ratio, do the following: + + #+begin_example + ,#+ATTR_ODT: :height 10 + [[./img.png]] + #+end_example + +**** Anchoring of images +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: @samp{ATTR_ODT}, keyword +The ODT export back-end can anchor images to =as-char=, =paragraph=, +or =page=. Set the preferred anchor using the =:anchor= property of +the =ATTR_ODT= line. + +To create an image that is anchored to a page: + +#+begin_example +,#+ATTR_ODT: :anchor page +[[./img.png]] +#+end_example + +*** Math formatting in ODT export +:PROPERTIES: +:DESCRIPTION: Formatting @LaTeX{} fragments. +:END: + +The ODT exporter has special support for handling math. + +**** LaTeX math snippets +:PROPERTIES: +:DESCRIPTION: Embedding in @LaTeX{} format. +:END: + +LaTeX math snippets (see [[*LaTeX fragments]]) can be embedded in the ODT +document in one of the following ways: + +- MathML :: + + #+cindex: MathML + Add this line to the Org file. This option is activated on + a per-file basis. + + : #+OPTIONS: tex:t + + With this option, LaTeX fragments are first converted into MathML + fragments using an external LaTeX-to-MathML converter program. The + resulting MathML fragments are then embedded as an OpenDocument + Formula in the exported document. + + #+vindex: org-latex-to-mathml-convert-command + #+vindex: org-latex-to-mathml-jar-file + You can specify the LaTeX-to-MathML converter by customizing the + variables ~org-latex-to-mathml-convert-command~ and + ~org-latex-to-mathml-jar-file~. + + If you prefer to use MathToWeb[fn:136] as your converter, you can + configure the above variables as shown below. + + #+begin_src emacs-lisp + (setq org-latex-to-mathml-convert-command + "java -jar %j -unicode -force -df %o %I" + org-latex-to-mathml-jar-file + "/path/to/mathtoweb.jar") + #+end_src + + #+texinfo: @noindent + or, to use LaTeX​ML[fn:137] instead, + + #+begin_src emacs-lisp + (setq org-latex-to-mathml-convert-command + "latexmlmath \"%i\" --presentationmathml=%o") + #+end_src + + To quickly verify the reliability of the LaTeX-to-MathML + converter, use the following commands: + + - {{{kbd(M-x org-export-as-odf)}}} :: + + Convert a LaTeX math snippet to an OpenDocument formula (=.odf=) + file. + + - {{{kbd(M-x org-export-as-odf-and-open)}}} :: + + Convert a LaTeX math snippet to an OpenDocument formula (=.odf=) + file and open the formula file with the system-registered + application. + +- PNG images :: + + #+cindex: dvipng + #+cindex: dvisvgm + #+cindex: ImageMagick + Add this line to the Org file. This option is activated on + a per-file basis. + + : #+OPTIONS: tex:dvipng + + : #+OPTIONS: tex:dvisvgm + + #+texinfo: @noindent + or + + : #+OPTIONS: tex:imagemagick + + Under this option, LaTeX fragments are processed into PNG or SVG + images and the resulting images are embedded in the exported + document. This method requires dvipng program, dvisvgm or + ImageMagick programs. + +**** MathML and OpenDocument formula files +:PROPERTIES: +:DESCRIPTION: Embedding in native format. +:END: + +When embedding LaTeX math snippets in ODT documents is not reliable, +there is one more option to try. Embed an equation by linking to its +MathML (=.mml=) source or its OpenDocument formula (=.odf=) file as +shown below: + +: [[./equation.mml]] + +#+texinfo: @noindent +or + +: [[./equation.odf]] + +*** Labels and captions in ODT export +:PROPERTIES: +:DESCRIPTION: Rendering objects. +:END: + +ODT format handles labeling and captioning of objects based on their +types. Inline images, tables, LaTeX fragments, and Math formulas are +numbered and captioned separately. Each object also gets a unique +sequence number based on its order of first appearance in the Org +file. Each category has its own sequence. A caption is just a label +applied to these objects. + +#+begin_example +,#+CAPTION: Bell curve +,#+NAME: fig:SED-HR4049 +[[./img/a.png]] +#+end_example + +When rendered, it may show as follows in the exported document: + +: Figure 2: Bell curve + +#+vindex: org-odt-category-map-alist +To modify the category component of the caption, customize the option +~org-odt-category-map-alist~. For example, to tag embedded images +with the string "Illustration" instead of the default string "Figure", +use the following setting: + +#+begin_src emacs-lisp +(setq org-odt-category-map-alist + '(("__Figure__" "Illustration" "value" "Figure" org-odt--enumerable-image-p))) +#+end_src + +With the above modification, the previous example changes to: + +: Illustration 2: Bell curve + +*** Literal examples in ODT export +:PROPERTIES: +:DESCRIPTION: For source code and example blocks. +:END: + +The ODT export back-end supports literal examples (see [[*Literal +Examples]]) with full fontification. Internally, the ODT export +back-end relies on =htmlfontify.el= to generate the style definitions +needed for fancy listings. The auto-generated styles get =OrgSrc= +prefix and inherit colors from the faces used by Emacs Font Lock +library for that source language. + +#+vindex: org-odt-fontify-srcblocks +For custom fontification styles, customize the +~org-odt-create-custom-styles-for-srcblocks~ option. + +#+vindex: org-odt-create-custom-styles-for-srcblocks +To turn off fontification of literal examples, customize the +~org-odt-fontify-srcblocks~ option. + +*** Advanced topics in ODT export +:PROPERTIES: +:DESCRIPTION: For power users. +:END: + +The ODT export back-end has extensive features useful for power users +and frequent uses of ODT formats. + +**** Configuring a document converter +:PROPERTIES: +:DESCRIPTION: Registering a document converter. +:UNNUMBERED: notoc +:END: +#+cindex: convert +#+cindex: doc, docx, rtf +#+cindex: converter + +The ODT export back-end works with popular converters with little or +no extra configuration. See [[*Extending ODT export]]. The following is +for unsupported converters or tweaking existing defaults. + +- Register the converter :: + + #+vindex: org-export-odt-convert-processes + Add the name of the converter to the ~org-odt-convert-processes~ + variable. Note that it also requires how the converter is invoked + on the command line. See the variable's docstring for details. + +- Configure its capabilities :: + + #+vindex: org-export-odt-convert-capabilities + Specify which formats the converter can handle by customizing the + variable ~org-odt-convert-capabilities~. Use the entry for the + default values in this variable for configuring the new converter. + Also see its docstring for details. + +- Choose the converter :: + + #+vindex: org-export-odt-convert-process + Select the newly added converter as the preferred one by customizing + the option ~org-odt-convert-process~. + +**** Working with OpenDocument style files +:PROPERTIES: +:DESCRIPTION: Exploring internals. +:UNNUMBERED: notoc +:END: +#+cindex: styles, custom +#+cindex: template, custom + +This section explores the internals of the ODT exporter; the means by which +it produces styled documents; the use of automatic and custom OpenDocument +styles. + +The ODT exporter relies on two files for generating its output. These +files are bundled with the distribution under the directory pointed to +by the variable ~org-odt-styles-dir~. The two files are: + +- =OrgOdtStyles.xml= <> :: + + This file contributes to the =styles.xml= file of the final ODT + document. This file gets modified for the following purposes: + + 1. To control outline numbering based on user settings; + + 2. To add styles generated by =htmlfontify.el= for fontification of + code blocks. + +- =OrgOdtContentTemplate.xml= <> :: + + This file contributes to the =content.xml= file of the final ODT + document. The contents of the Org outline are inserted between the + == ... == elements of this file. + + Apart from serving as a template file for the final =content.xml=, + the file serves the following purposes: + + 1. It contains automatic styles for formatting of tables which are + referenced by the exporter; + + 2. It contains == ... == + elements that control numbering of tables, images, equations, and + similar entities. + +<> The following two variables control +the location from where the ODT exporter picks up the custom styles +and content template files. Customize these variables to override the +factory styles used by the exporter. + +- ~org-odt-styles-file~ :: + + The ODT export back-end uses the file pointed to by this variable, + such as =styles.xml=, for the final output. It can take one of the + following values: + + - =FILE.xml= :: + + Use this file instead of the default =styles.xml= + + - =FILE.odt= or =FILE.ott= :: + + Use the =styles.xml= contained in the specified OpenDocument + Text or Template file + + - =FILE.odt= or =FILE.ott= and a subset of included files :: + + Use the =styles.xml= contained in the specified OpenDocument Text + or Template file. Additionally extract the specified member files + and embed those within the final ODT document. + + Use this option if the =styles.xml= file references additional + files like header and footer images. + + - ~nil~ :: + + Use the default =styles.xml=. + +- ~org-odt-content-template-file~ :: + + Use this variable to specify the blank =content.xml= used in the + final output. + +**** Creating one-off styles +:PROPERTIES: +:DESCRIPTION: Customizing styles, highlighting... +:UNNUMBERED: notoc +:END: + +The ODT export back-end can read embedded raw OpenDocument XML from +the Org file. Such direct formatting is useful for one-off instances. + +- Embedding ODT tags as part of regular text :: + + Enclose OpenDocument syntax in =@@odt:...@@= for inline markup. For + example, to highlight a region of text do the following: + + #+begin_example + @@odt:This is highlighted + text@@. But this is regular text. + #+end_example + + *Hint:* To see the above example in action, edit the =styles.xml= + (see [[x-orgodtstyles-xml][Factory styles]]) and add a custom /Highlight/ style as shown + below: + + #+begin_example + + + + #+end_example + +- Embedding a one-line OpenDocument XML :: + + #+cindex: @samp{ODT}, keyword + The ODT export back-end can read one-liner options with =#+ODT:= in + the Org file. For example, to force a page break: + + #+begin_example + ,#+ODT: + #+end_example + + *Hint:* To see the above example in action, edit your + =styles.xml= (see [[x-orgodtstyles-xml][Factory styles]]) and add a custom =PageBreak= + style as shown below. + + #+begin_example + + + + #+end_example + +- Embedding a block of OpenDocument XML :: + + The ODT export back-end can also read ODT export blocks for + OpenDocument XML. Such blocks use the =#+BEGIN_EXPORT odt= + ... =#+END_EXPORT= constructs. + + For example, to create a one-off paragraph that uses bold text, do + the following: + + #+begin_example + ,#+BEGIN_EXPORT odt + + This paragraph is specially formatted and uses bold text. + + ,#+END_EXPORT + #+end_example + +**** Customizing tables in ODT export +:PROPERTIES: +:DESCRIPTION: Defining table templates. +:UNNUMBERED: notoc +:END: +#+cindex: tables, in ODT export +#+cindex: @samp{ATTR_ODT}, keyword + +Override the default table format by specifying a custom table style +with the =#+ATTR_ODT= line. For a discussion on default formatting of +tables, see [[*Tables in ODT export]]. + +This feature closely mimics the way table templates are defined in the +OpenDocument-v1.2 specification[fn:138]. + +#+vindex: org-odt-table-styles +For quick preview of this feature, install the settings below and export the +table that follows: + +#+begin_src emacs-lisp +(setq org-export-odt-table-styles + (append org-export-odt-table-styles + '(("TableWithHeaderRowAndColumn" "Custom" + ((use-first-row-styles . t) + (use-first-column-styles . t))) + ("TableWithFirstRowandLastRow" "Custom" + ((use-first-row-styles . t) + (use-last-row-styles . t)))))) +#+end_src + +#+begin_example +,#+ATTR_ODT: :style TableWithHeaderRowAndColumn +| Name | Phone | Age | +| Peter | 1234 | 17 | +| Anna | 4321 | 25 | +#+end_example + +The example above used =Custom= template and installed two table +styles =TableWithHeaderRowAndColumn= and +=TableWithFirstRowandLastRow=. *Important:* The OpenDocument styles +needed for producing the above template were pre-defined. They are +available in the section marked =Custom Table Template= in +=OrgOdtContentTemplate.xml= (see [[x-orgodtcontenttemplate-xml][Factory styles]]). For adding new +templates, define new styles there. + +To use this feature proceed as follows: + +1. Create a table template[fn:139]. + + A table template is set of =table-cell= and =paragraph= styles for + each of the following table cell categories: + + - Body + - First column + - Last column + - First row + - Last row + - Even row + - Odd row + - Even column + - Odd Column + + The names for the above styles must be chosen based on the name of + the table template using a well-defined convention. + + The naming convention is better illustrated with an example. For + a table template with the name =Custom=, the needed style names are + listed in the following table. + + | Cell type | Cell style | Paragraph style | + |--------------+------------------------------+-----------------------------------| + | Body | =CustomTableCell= | =CustomTableParagraph= | + | First column | =CustomFirstColumnTableCell= | =CustomFirstColumnTableParagraph= | + | Last column | =CustomLastColumnTableCell= | =CustomLastColumnTableParagraph= | + | First row | =CustomFirstRowTableCell= | =CustomFirstRowTableParagraph= | + | Last row | =CustomLastRowTableCell= | =CustomLastRowTableParagraph= | + | Even row | =CustomEvenRowTableCell= | =CustomEvenRowTableParagraph= | + | Odd row | =CustomOddRowTableCell= | =CustomOddRowTableParagraph= | + | Even column | =CustomEvenColumnTableCell= | =CustomEvenColumnTableParagraph= | + | Odd column | =CustomOddColumnTableCell= | =CustomOddColumnTableParagraph= | + + To create a table template with the name =Custom=, define the above + styles in the == ... + == element of the content template file + (see [[x-orgodtcontenttemplate-xml][Factory styles]]). + +2. Define a table style[fn:140]. + + #+vindex: org-odt-table-styles + To define a table style, create an entry for the style in the + variable ~org-odt-table-styles~ and specify the following: + + - the name of the table template created in step (1), + - the set of cell styles in that template that are to be activated. + + For example, the entry below defines two different table styles + =TableWithHeaderRowAndColumn= and =TableWithFirstRowandLastRow= + based on the same template =Custom=. The styles achieve their + intended effect by selectively activating the individual cell + styles in that template. + + #+begin_src emacs-lisp + (setq org-export-odt-table-styles + (append org-export-odt-table-styles + '(("TableWithHeaderRowAndColumn" "Custom" + ((use-first-row-styles . t) + (use-first-column-styles . t))) + ("TableWithFirstRowandLastRow" "Custom" + ((use-first-row-styles . t) + (use-last-row-styles . t)))))) + #+end_src + +3. Associate a table with the table style. + + To do this, specify the table style created in step (2) as part of + the =ATTR_ODT= line as shown below. + + #+begin_example + ,#+ATTR_ODT: :style TableWithHeaderRowAndColumn + | Name | Phone | Age | + | Peter | 1234 | 17 | + | Anna | 4321 | 25 | + #+end_example + +**** Validating OpenDocument XML +:PROPERTIES: +:DESCRIPTION: Debugging corrupted OpenDocument files. +:UNNUMBERED: notoc +:END: + +Sometimes ODT format files may not open due to =.odt= file corruption. +To verify if such a file is corrupt, validate it against the +OpenDocument Relax NG Compact (RNC) syntax schema. But first the +=.odt= files have to be decompressed using =zip=. Note that =.odt= +files are ZIP archives: [[info:emacs::File Archives]]. The contents of +ODT files are in XML. For general help with validation---and +schema-sensitive editing---of XML files: [[info:nxml-mode::Introduction]]. + +#+vindex: org-export-odt-schema-dir +Customize ~org-odt-schema-dir~ to point to a directory with +OpenDocument RNC files and the needed schema-locating rules. The ODT +export back-end takes care of updating the +~rng-schema-locating-files~. + +** Org Export +:PROPERTIES: +:DESCRIPTION: Exporting to Org. +:END: + +#+cindex: Org export +/org/ export back-end creates a normalized version of the Org document +in current buffer. The exporter evaluates Babel code (see [[*Evaluating +Code Blocks]]) and removes content specific to other back-ends. + +*** Org export commands +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- {{{kbd(C-c C-e O o)}}} (~org-org-export-to-org~) :: + + #+kindex: C-c C-e O o + #+findex: org-org-export-to-org + Export as an Org file with a =.org= extension. For =myfile.org=, + Org exports to =myfile.org.org=, overwriting without warning. + +- {{{kbd(C-c C-e O v)}}} (~~) :: + + #+kindex: C-c C-e O v + Export to an Org file, then open it. + +** Texinfo Export +:PROPERTIES: +:DESCRIPTION: Exporting to Texinfo. +:END: + +*** Texinfo export commands +:PROPERTIES: +:DESCRIPTION: Invoking commands. +:END: + +- {{{kbd(C-c C-e i t)}}} (~org-texinfo-export-to-texinfo~) :: + + #+kindex: C-c C-e i t + #+findex: org-texinfo-export-to-texinfo + Export as a Texinfo file with =.texi= extension. For =myfile.org=, + Org exports to =myfile.texi=, overwriting without warning. + +- {{{kbd(C-c C-e i i)}}} (~org-texinfo-export-to-info~) :: + + #+kindex: C-c C-e i i + #+findex: org-texinfo-export-to-info + #+vindex: org-texinfo-info-process + Export to Texinfo format first and then process it to make an Info + file. To generate other formats, such as DocBook, customize the + ~org-texinfo-info-process~ variable. + +*** Texinfo specific export settings +:PROPERTIES: +:DESCRIPTION: Setting the environment. +:END: + +The Texinfo export back-end has several additional keywords for +customizing Texinfo output. Setting these keywords works similar to +the general options (see [[*Export Settings]]). + +- =SUBTITLE= :: + + #+cindex: @samp{SUBTITLE}, keyword + The document subtitle. + +- =SUBAUTHOR= :: + + #+cindex: @samp{SUBAUTHOR}, keyword + Additional authors for the document. + +- =TEXINFO_FILENAME= :: + + #+cindex: @samp{TEXINFO_FILENAME}, keyword + The Texinfo filename. + +- =TEXINFO_CLASS= :: + + #+cindex: @samp{TEXINFO_CLASS}, keyword + #+vindex: org-texinfo-default-class + The default document class (~org-texinfo-default-class~), which must + be a member of ~org-texinfo-classes~. + +- =TEXINFO_HEADER= :: + + #+cindex: @samp{TEXINFO_HEADER}, keyword + Arbitrary lines inserted at the end of the header. + +- =TEXINFO_POST_HEADER= :: + + #+cindex: @samp{TEXINFO_POST_HEADER}, keyword + Arbitrary lines inserted after the end of the header. + +- =TEXINFO_DIR_CATEGORY= :: + + #+cindex: @samp{TEXINFO_DIR_CATEGORY}, keyword + The directory category of the document. + +- =TEXINFO_DIR_TITLE= :: + + #+cindex: @samp{TEXINFO_DIR_TITLE}, keyword + The directory title of the document. + +- =TEXINFO_DIR_DESC= :: + + #+cindex: @samp{TEXINFO_DIR_DESC}, keyword + The directory description of the document. + +- =TEXINFO_PRINTED_TITLE= :: + + #+cindex: @samp{TEXINFO_PRINTED_TITLE}, keyword + The printed title of the document. + +*** Texinfo file header +:PROPERTIES: +:DESCRIPTION: Generating the header. +:END: + +#+cindex: @samp{TEXINFO_FILENAME}, keyword +After creating the header for a Texinfo file, the Texinfo back-end +automatically generates a name and destination path for the Info file. +To override this default with a more sensible path and name, specify +the =TEXINFO_FILENAME= keyword. + +#+vindex: org-texinfo-coding-system +#+cindex: @samp{TEXINFO_HEADER}, keyword +Along with the output's file name, the Texinfo header also contains +language details (see [[*Export Settings]]) and encoding system as set in +the ~org-texinfo-coding-system~ variable. Insert =TEXINFO_HEADER= +keywords for each additional command in the header, for example: + +: #+TEXINFO_HEADER: @synindex + +#+cindex: @samp{TEXINFO_CLASS}, keyword +#+vindex: org-texinfo-classes +Instead of repeatedly installing the same set of commands, define +a class in ~org-texinfo-classes~ once, and then activate it in the +document by setting the =TEXINFO_CLASS= keyword to that class. + +*** Texinfo title and copyright page +:PROPERTIES: +:DESCRIPTION: Creating preamble pages. +:END: + +#+cindex: @samp{TEXINFO_PRINTED_TITLE}, keyword +The default template for hard copy output has a title page with +=TITLE= and =AUTHOR= keywords (see [[*Export Settings]]). To replace the +regular title with something different for the printed version, use +the =TEXINFO_PRINTED_TITLE= and =SUBTITLE= keywords. Both expect raw +Texinfo code for setting their values. + +#+cindex: @samp{SUBAUTHOR}, keyword +If one =AUTHOR= line is not sufficient, add multiple =SUBAUTHOR= +keywords. They have to be set in raw Texinfo code. + +#+begin_example +,#+AUTHOR: Jane Smith +,#+SUBAUTHOR: John Doe +,#+TEXINFO_PRINTED_TITLE: This Long Title@@inlinefmt{tex,@*} Is Broken in @TeX{} +#+end_example + +#+cindex: @samp{COPYING}, property +Copying material is defined in a dedicated headline with a non-~nil~ +=COPYING= property. The back-end inserts the contents within +a =@copying= command at the beginning of the document. The heading +itself does not appear in the structure of the document. + +Copyright information is printed on the back of the title page. + +#+begin_example +,* Legalese + :PROPERTIES: + :COPYING: t + :END: + + This is a short example of a complete Texinfo file, version 1.0. + + Copyright \copy 2016 Free Software Foundation, Inc. +#+end_example + +*** Info directory file +:PROPERTIES: +:DESCRIPTION: Installing a manual in Info file hierarchy. +:END: + +#+cindex: @samp{dir} file, in Texinfo export +#+cindex: Info directory file, in Texinfo export +#+cindex: @code{install-info}, in Texinfo export + +#+cindex: @samp{TEXINFO_DIR_CATEGORY}, keyword +#+cindex: @samp{TEXINFO_DIR_TITLE}, keyword +#+cindex: @samp{TEXINFO_DIR_DESC}, keyword +The end result of the Texinfo export process is the creation of an +Info file. This Info file's metadata has variables for category, +title, and description: =TEXINFO_DIR_CATEGORY=, =TEXINFO_DIR_TITLE=, +and =TEXINFO_DIR_DESC= keywords that establish where in the Info +hierarchy the file fits. + +Here is an example that writes to the Info directory file: + +#+begin_example +,#+TEXINFO_DIR_CATEGORY: Emacs +,#+TEXINFO_DIR_TITLE: Org Mode: (org) +,#+TEXINFO_DIR_DESC: Outline-based notes management and organizer +#+end_example + +*** Headings and sectioning structure +:PROPERTIES: +:DESCRIPTION: Building document structure. +:END: + +#+vindex: org-texinfo-classes +#+vindex: org-texinfo-default-class +#+cindex: @samp{TEXINFO_CLASS}, keyword +The Texinfo export back-end uses a pre-defined scheme to convert Org +headlines to equivalent Texinfo structuring commands. A scheme like +this maps top-level headlines to numbered chapters tagged as +~@chapter~ and lower-level headlines to unnumbered chapters tagged as +~@unnumbered~. To override such mappings to introduce ~@part~ or +other Texinfo structuring commands, define a new class in +~org-texinfo-classes~. Activate the new class with the +=TEXINFO_CLASS= keyword. When no new class is defined and activated, +the Texinfo export back-end defaults to the +~org-texinfo-default-class~. + +If an Org headline's level has no associated Texinfo structuring +command, or is below a certain threshold (see [[*Export Settings]]), then +the Texinfo export back-end makes it into a list item. + +#+cindex: @samp{APPENDIX}, property +The Texinfo export back-end makes any headline with a non-~nil~ +=APPENDIX= property into an appendix. This happens independent of the +Org headline level or the =TEXINFO_CLASS= keyword. + +#+cindex: @samp{ALT_TITLE}, property +#+cindex: @samp{DESCRIPTION}, property +The Texinfo export back-end creates a menu entry after the Org +headline for each regular sectioning structure. To override this with +a shorter menu entry, use the =ALT_TITLE= property (see [[*Table of +Contents]]). Texinfo menu entries also have an option for a longer +=DESCRIPTION= property. Here's an example that uses both to override +the default menu entry: + +#+begin_example +,* Controlling Screen Display + :PROPERTIES: + :ALT_TITLE: Display + :DESCRIPTION: Controlling Screen Display + :END: +#+end_example + +#+cindex: Top node, in Texinfo export +The text before the first headline belongs to the /Top/ node, i.e., +the node in which a reader enters an Info manual. As such, it is +expected not to appear in printed output generated from the =.texi= +file. See [[info:texinfo::The Top Node]], for more information. + +*** Indices +:PROPERTIES: +:DESCRIPTION: Creating indices. +:END: + +#+cindex: @samp{CINDEX}, keyword +#+cindex: concept index, in Texinfo export +#+cindex: @samp{FINDEX}, keyword +#+cindex: function index, in Texinfo export +#+cindex: @samp{KINDEX}, keyword +#+cindex: keystroke index, in Texinfo export +#+cindex: @samp{PINDEX}, keyword +#+cindex: program index, in Texinfo export +#+cindex: @samp{TINDEX}, keyword +#+cindex: data type index, in Texinfo export +#+cindex: @samp{VINDEX}, keyword +#+cindex: variable index, in Texinfo export +The Texinfo export back-end recognizes these indexing keywords if used +in the Org file: =CINDEX=, =FINDEX=, =KINDEX=, =PINDEX=, =TINDEX= and +=VINDEX=. Write their value as verbatim Texinfo code; in particular, +={=, =}= and =@= characters need to be escaped with =@= if they do not +belong to a Texinfo command. + +: #+CINDEX: Defining indexing entries + +#+cindex: @samp{INDEX}, property +For the back-end to generate an index entry for a headline, set the +=INDEX= property to =cp= or =vr=. These abbreviations come from +Texinfo that stand for concept index and variable index. The Texinfo +manual has abbreviations for all other kinds of indexes. The back-end +exports the headline as an unnumbered chapter or section command, and +then inserts the index after its contents. + +#+begin_example +,* Concept Index + :PROPERTIES: + :INDEX: cp + :END: +#+end_example + +*** Quoting Texinfo code +:PROPERTIES: +:DESCRIPTION: Incorporating literal Texinfo code. +:END: + +Use any of the following three methods to insert or escape raw Texinfo +code: + +#+cindex: @samp{TEXINFO}, keyword +#+cindex: @samp{BEGIN_EXPORT texinfo} +#+begin_example +Richard @@texinfo:@sc{@@Stallman@@texinfo:}@@ commence' GNU. + +,#+TEXINFO: @need800 +This paragraph is preceded by... + +,#+BEGIN_EXPORT texinfo + @auindex Johnson, Mark + @auindex Lakoff, George +,#+END_EXPORT +#+end_example + +*** Plain lists in Texinfo export +:PROPERTIES: +:DESCRIPTION: List attributes. +:END: + +#+cindex: @samp{ATTR_TEXINFO}, keyword +#+cindex: two-column tables, in Texinfo export +#+cindex: table-type, Texinfo attribute +The Texinfo export back-end by default converts description lists in +the Org file using the default command =@table=, which results in +a table with two columns. To change this behavior, set =:table-type= +attribute to either =ftable= or =vtable= value. For more information, +see [[info:texinfo::Two-column Tables]]. + +#+vindex: org-texinfo-table-default-markup +#+cindex: indic, Texinfo attribute +The Texinfo export back-end by default also applies a text highlight +based on the defaults stored in ~org-texinfo-table-default-markup~. +To override the default highlight command, specify another one with +the =:indic= attribute. + +#+cindex: multiple items in Texinfo lists +#+cindex: sep, Texinfo attribute +Org syntax is limited to one entry per list item. Nevertheless, the +Texinfo export back-end can split that entry according to any text +provided through the =:sep= attribute. Each part then becomes a new +entry in the first column of the table. + +The following example illustrates all the attributes above: + +#+begin_example +,#+ATTR_TEXINFO: :table-type vtable :sep , :indic asis +- foo, bar :: This is the common text for variables foo and bar. +#+end_example + +#+texinfo: @noindent +becomes + +#+begin_example +@vtable @asis +@item foo +@itemx bar +This is the common text for variables foo and bar. +@end table +#+end_example + +#+cindex: lettered lists, in Texinfo export +#+cindex: enum, Texinfo attribute +Ordered lists are numbered when exported to Texinfo format. Such +numbering obeys any counter (see [[*Plain Lists]]) in the first item of +the list. The =:enum= attribute also let you start the list at +a specific number, or switch to a lettered list, as illustrated here + +#+begin_example +#+ATTR_TEXINFO: :enum A +1. Alpha +2. Bravo +3. Charlie +#+end_example + +*** Tables in Texinfo export +:PROPERTIES: +:DESCRIPTION: Table attributes. +:END: + +#+cindex: @samp{ATTR_TEXINFO}, keyword +When exporting tables, the Texinfo export back-end uses the widest +cell width in each column. To override this and instead specify as +fractions of line length, use the =:columns= attribute. See example +below. + +#+begin_example +,#+ATTR_TEXINFO: :columns .5 .5 +| a cell | another cell | +#+end_example + +*** Images in Texinfo export +:PROPERTIES: +:DESCRIPTION: Image attributes. +:END: + +#+cindex: @samp{ATTR_TEXINFO}, keyword +Insert a file link to the image in the Org file, and the Texinfo +export back-end inserts the image. These links must have the usual +supported image extensions and no descriptions. To scale the image, +use =:width= and =:height= attributes. For alternate text, use =:alt= +and specify the text using Texinfo code, as shown in the example: + +#+begin_example +,#+ATTR_TEXINFO: :width 1in :alt Alternate @i{text} +[[ridt.pdf]] +#+end_example + +*** Quotations in Texinfo export +:PROPERTIES: +:DESCRIPTION: Quote block attributes. +:END: + +#+cindex: @samp{ATTR_TEXINFO}, keyword +You can write the text of a quotation within a quote block (see +[[*Paragraphs]]). You may also emphasize some text at the beginning of +the quotation with the =:tag= attribute. + +#+begin_example +,#+ATTR_TEXINFO: :tag Warning +,#+BEGIN_QUOTE +Striking your thumb with a hammer may cause severe pain and discomfort. +,#+END_QUOTE +#+end_example + +To specify the author of the quotation, use the =:author= attribute. + +#+begin_example +,#+ATTR_TEXINFO: :author King Arthur +,#+BEGIN_QUOTE +The Lady of the Lake, her arm clad in the purest shimmering samite, +held aloft Excalibur from the bosom of the water, signifying by divine +providence that I, Arthur, was to carry Excalibur. That is why I am +your king. +,#+END_QUOTE +#+end_example + +*** Special blocks in Texinfo export +:PROPERTIES: +:DESCRIPTION: Special block attributes. +:END: + +#+cindex: @samp{ATTR_TEXINFO}, keyword + +The Texinfo export back-end converts special blocks to commands with +the same name. It also adds any =:options= attributes to the end of +the command, as shown in this example: + +#+begin_example +,#+ATTR_TEXINFO: :options org-org-export-to-org ... +,#+BEGIN_defun + A somewhat obsessive function name. +,#+END_defun +#+end_example + +#+texinfo: @noindent +becomes + +#+begin_example +@defun org-org-export-to-org ... + A somewhat obsessive function name. +@end defun +#+end_example + +*** A Texinfo example +:PROPERTIES: +:DESCRIPTION: Processing Org to Texinfo. +:END: + +Here is a more detailed example Org file. See +[[info:texinfo::GNU Sample Texts]] for an equivalent example using +Texinfo code. + +#+begin_example +,#+TITLE: GNU Sample {{{version}}} +,#+SUBTITLE: for version {{{version}}}, {{{updated}}} +,#+AUTHOR: A.U. Thor +,#+EMAIL: bug-sample@gnu.org + +,#+OPTIONS: ':t toc:t author:t email:t +,#+LANGUAGE: en + +,#+MACRO: version 2.0 +,#+MACRO: updated last updated 4 March 2014 + +,#+TEXINFO_FILENAME: sample.info +,#+TEXINFO_HEADER: @syncodeindex pg cp + +,#+TEXINFO_DIR_CATEGORY: Texinfo documentation system +,#+TEXINFO_DIR_TITLE: sample: (sample) +,#+TEXINFO_DIR_DESC: Invoking sample + +,#+TEXINFO_PRINTED_TITLE: GNU Sample + +This manual is for GNU Sample (version {{{version}}}, +{{{updated}}}). + +,* Copying + :PROPERTIES: + :COPYING: t + :END: + + This manual is for GNU Sample (version {{{version}}}, + {{{updated}}}), which is an example in the Texinfo documentation. + + Copyright \copy 2016 Free Software Foundation, Inc. + + ,#+BEGIN_QUOTE + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.3 or any later version published by the Free Software + Foundation; with no Invariant Sections, with no Front-Cover Texts, + and with no Back-Cover Texts. A copy of the license is included in + the section entitled "GNU Free Documentation License". + ,#+END_QUOTE + +,* Invoking sample + + ,#+PINDEX: sample + ,#+CINDEX: invoking @command{sample} + + This is a sample manual. There is no sample program to invoke, but + if there were, you could see its basic usage and command line + options here. + +,* GNU Free Documentation License + :PROPERTIES: + :APPENDIX: t + :END: + + ,#+INCLUDE: fdl.org + +,* Index + :PROPERTIES: + :INDEX: cp + :END: +#+end_example + +** iCalendar Export +:PROPERTIES: +:DESCRIPTION: Exporting to iCalendar. +:END: +#+cindex: iCalendar export + +A large part of Org mode's interoperability success is its ability to +easily export to or import from external applications. The iCalendar +export back-end takes calendar data from Org files and exports to the +standard iCalendar format. + +#+vindex: org-icalendar-include-todo +#+vindex: org-icalendar-use-deadline +#+vindex: org-icalendar-use-scheduled +The iCalendar export back-end can also incorporate TODO entries based +on the configuration of the ~org-icalendar-include-todo~ variable. +The back-end exports plain timestamps as =VEVENT=, TODO items as +=VTODO=, and also create events from deadlines that are in non-TODO +items. The back-end uses the deadlines and scheduling dates in Org +TODO items for setting the start and due dates for the iCalendar TODO +entry. Consult the ~org-icalendar-use-deadline~ and +~org-icalendar-use-scheduled~ variables for more details. + +#+vindex: org-icalendar-categories +#+vindex: org-icalendar-alarm-time +For tags on the headline, the iCalendar export back-end makes them +into iCalendar categories. To tweak the inheritance of tags and TODO +states, configure the variable ~org-icalendar-categories~. To assign +clock alarms based on time, configure the ~org-icalendar-alarm-time~ +variable. + +#+vindex: org-icalendar-store-UID +#+cindex: @samp{ID}, property +The iCalendar format standard requires globally unique identifier---or +UID---for each entry. The iCalendar export back-end creates UIDs +during export. To save a copy of the UID in the Org file set the +variable ~org-icalendar-store-UID~. The back-end looks for the =ID= +property of the entry for re-using the same UID for subsequent +exports. + +Since a single Org entry can result in multiple iCalendar +entries---timestamp, deadline, scheduled item, or TODO item---Org adds +prefixes to the UID, depending on which part of the Org entry +triggered the creation of the iCalendar entry. Prefixing ensures UIDs +remains unique, yet enable synchronization programs trace the +connections. + +- {{{kbd(C-c C-e c f)}}} (~org-icalendar-export-to-ics~) :: + + #+kindex: C-c C-e c f + #+findex: org-icalendar-export-to-ics + Create iCalendar entries from the current Org buffer and store them + in the same directory, using a file extension =.ics=. + +- {{{kbd(C-c C-e c a)}}} (~org-icalendar-export-agenda-files~) :: + + #+kindex: C-c C-e c a + #+findex: org-icalendar-export-agenda-files + Create iCalendar entries from Org files in ~org-agenda-files~ and + store in a separate iCalendar file for each Org file. + +- {{{kbd(C-c C-e c c)}}} (~org-icalendar-combine-agenda-files~) :: + + #+kindex: C-c C-e c c + #+findex: org-icalendar-combine-agenda-files + #+vindex: org-icalendar-combined-agenda-file + Create a combined iCalendar file from Org files in + ~org-agenda-files~ and write it to + ~org-icalendar-combined-agenda-file~ file name. + +#+cindex: @samp{SUMMARY}, property +#+cindex: @samp{DESCRIPTION}, property +#+cindex: @samp{LOCATION}, property +#+cindex: @samp{TIMEZONE}, property +#+cindex: @samp{CLASS}, property +The iCalendar export back-end includes =SUMMARY=, =DESCRIPTION=, +=LOCATION=, =TIMEZONE= and =CLASS= properties from the Org entries +when exporting. To force the back-end to inherit the =LOCATION=, +=TIMEZONE= and =CLASS= properties, configure the +~org-use-property-inheritance~ variable. + +#+vindex: org-icalendar-include-body +When Org entries do not have =SUMMARY=, =DESCRIPTION=, =LOCATION= and +=CLASS= properties, the iCalendar export back-end derives the summary +from the headline, and derives the description from the body of the +Org item. The ~org-icalendar-include-body~ variable limits the +maximum number of characters of the content are turned into its +description. + +The =TIMEZONE= property can be used to specify a per-entry time zone, +and is applied to any entry with timestamp information. Time zones +should be specified as per the IANA time zone database format, e.g., +=Asia/Almaty=. Alternately, the property value can be =UTC=, to force +UTC time for this entry only. + +The =CLASS= property can be used to specify a per-entry visibility +class or access restrictions, and is applied to any entry with class +information. The iCalendar standard defines three visibility classes: +- =PUBLIC= :: The entry is publicly visible (this is the default). +- =CONFIDENTIAL= :: Only a limited group of clients get access to the + event. +- =PRIVATE= :: The entry can be retrieved only by its owner. +The server should treat unknown class properties the same as +=PRIVATE=. + +Exporting to iCalendar format depends in large part on the +capabilities of the destination application. Some are more lenient +than others. Consult the Org mode FAQ for advice on specific +applications. + +** Other Built-in Back-ends +:PROPERTIES: +:DESCRIPTION: Exporting to a man page. +:END: + +Other export back-ends included with Org are: + +- =ox-man.el=: Export to a man page. + +To activate such back-ends, either customize ~org-export-backends~ or +load directly with =(require 'ox-man)=. On successful load, the +back-end adds new keys in the export dispatcher (see [[*The Export +Dispatcher]]). + +Follow the comment section of such files, for example, =ox-man.el=, +for usage and configuration details. + +** Advanced Export Configuration +:PROPERTIES: +:DESCRIPTION: Fine-tuning the export output. +:END: + +*** Export hooks +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+vindex: org-export-before-processing-hook +#+vindex: org-export-before-parsing-hook +The export process executes two hooks before the actual exporting +begins. The first hook, ~org-export-before-processing-hook~, runs +before any expansions of macros, Babel code, and include keywords in +the buffer. The second hook, ~org-export-before-parsing-hook~, runs +before the buffer is parsed. + +Functions added to these hooks are called with a single argument: the +export back-end actually used, as a symbol. You may use them for +heavy duty structural modifications of the document. For example, you +can remove every headline in the buffer during export like this: + +#+begin_src emacs-lisp +(defun my-headline-removal (backend) + "Remove all headlines in the current buffer. +BACKEND is the export back-end being used, as a symbol." + (org-map-entries + (lambda () (delete-region (point) (line-beginning-position 2))))) + +(add-hook 'org-export-before-parsing-hook #'my-headline-removal) +#+end_src + +*** Filters +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: Filters, exporting +Filters are lists of functions to be applied to certain parts for +a given back-end. The output from the first function in the filter is +passed on to the next function in the filter. The final output is the +output from the final function in the filter. + +The Org export process has many filter sets applicable to different +types of objects, plain text, parse trees, export options, and final +output formats. The filters are named after the element type or +object type: ~org-export-filter-TYPE-functions~, where {{{var(TYPE)}}} +is the type targeted by the filter. Valid types are: + +#+attr_texinfo: :columns 0.33 0.33 0.33 +| body | bold | babel-call | +| center-block | clock | code | +| diary-sexp | drawer | dynamic-block | +| entity | example-block | export-block | +| export-snippet | final-output | fixed-width | +| footnote-definition | footnote-reference | headline | +| horizontal-rule | inline-babel-call | inline-src-block | +| inlinetask | italic | item | +| keyword | latex-environment | latex-fragment | +| line-break | link | node-property | +| options | paragraph | parse-tree | +| plain-list | plain-text | planning | +| property-drawer | quote-block | radio-target | +| section | special-block | src-block | +| statistics-cookie | strike-through | subscript | +| superscript | table | table-cell | +| table-row | target | timestamp | +| underline | verbatim | verse-block | + +Here is an example filter that replaces non-breaking spaces ~ ~ in the +Org buffer with =~= for the LaTeX back-end. + +#+begin_src emacs-lisp +(defun my-latex-filter-nobreaks (text backend info) + "Ensure \" \" are properly handled in LaTeX export." + (when (org-export-derived-backend-p backend 'latex) + (replace-regexp-in-string " " "~" text))) + +(add-to-list 'org-export-filter-plain-text-functions + 'my-latex-filter-nobreaks) +#+end_src + +A filter requires three arguments: the code to be transformed, the +name of the back-end, and some optional information about the export +process. The third argument can be safely ignored. Note the use of +~org-export-derived-backend-p~ predicate that tests for /latex/ +back-end or any other back-end, such as /beamer/, derived from +/latex/. + +*** Defining filters for individual files +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +The Org export can filter not just for back-ends, but also for +specific files through the =BIND= keyword. Here is an example with +two filters; one removes brackets from time stamps, and the other +removes strike-through text. The filter functions are defined in +a code block in the same Org file, which is a handy location for +debugging. + +#+begin_example +,#+BIND: org-export-filter-timestamp-functions (tmp-f-timestamp) +,#+BIND: org-export-filter-strike-through-functions (tmp-f-strike-through) +,#+BEGIN_SRC emacs-lisp :exports results :results none + (defun tmp-f-timestamp (s backend info) + (replace-regexp-in-string "&[lg]t;\\|[][]" "" s)) + (defun tmp-f-strike-through (s backend info) "") +,#+END_SRC +#+end_example + +*** Extending an existing back-end +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Some parts of the conversion process can be extended for certain +elements so as to introduce a new or revised translation. That is how +the HTML export back-end was extended to handle Markdown format. The +extensions work seamlessly so any aspect of filtering not done by the +extended back-end is handled by the original back-end. Of all the +export customization in Org, extending is very powerful as it operates +at the parser level. + +For this example, make the /ascii/ back-end display the language used +in a source code block. Also make it display only when some attribute +is non-~nil~, like the following: + +: #+ATTR_ASCII: :language t + +Then extend ASCII back-end with a custom "my-ascii" back-end. + +#+begin_src emacs-lisp +(defun my-ascii-src-block (src-block contents info) + "Transcode a SRC-BLOCK element from Org to ASCII. +CONTENTS is nil. INFO is a plist used as a communication +channel." + (if (not (org-export-read-attribute :attr_ascii src-block :language)) + (org-export-with-backend 'ascii src-block contents info) + (concat + (format ",--[ %s ]--\n%s`----" + (org-element-property :language src-block) + (replace-regexp-in-string + "^" "| " + (org-element-normalize-string + (org-export-format-code-default src-block info))))))) + +(org-export-define-derived-backend 'my-ascii 'ascii + :translate-alist '((src-block . my-ascii-src-block))) +#+end_src + +The ~my-ascii-src-block~ function looks at the attribute above the +current element. If not true, hands over to /ascii/ back-end. If +true, which it is in this example, it creates a box around the code +and leaves room for the inserting a string for language. The last +form creates the new back-end that springs to action only when +translating ~src-block~ type elements. + +To use the newly defined back-end, evaluate the following from an Org +buffer: + +#+begin_src emacs-lisp +(org-export-to-buffer 'my-ascii "*Org MY-ASCII Export*") +#+end_src + +Further steps to consider would be an interactive function, +self-installing an item in the export dispatcher menu, and other +user-friendly improvements. + +** Export in Foreign Buffers +:PROPERTIES: +:DESCRIPTION: Author tables and lists in Org syntax. +:END: + +The export back-ends in Org often include commands to convert selected +regions. A convenient feature of this in-place conversion is that the +exported output replaces the original source. Here are such +functions: + +- ~org-ascii-convert-region-to-ascii~ :: + + #+findex: org-ascii-convert-region-to-ascii + Convert the selected region into ASCII. + +- ~org-ascii-convert-region-to-utf8~ :: + + #+findex: org-ascii-convert-region-to-utf8 + Convert the selected region into UTF-8. + +- ~org-html-convert-region-to-html~ :: + + #+findex: org-html-convert-region-to-html + Convert the selected region into HTML. + +- ~org-latex-convert-region-to-latex~ :: + + #+findex: org-latex-convert-region-to-latex + Convert the selected region into LaTeX. + +- ~org-texinfo-convert-region-to-texinfo~ :: + + #+findex: org-texinfo-convert-region-to-texinfo + Convert the selected region into Texinfo. + +- ~org-md-convert-region-to-md~ :: + + #+findex: org-md-convert-region-to-md + Convert the selected region into Markdown. + +In-place conversions are particularly handy for quick conversion of +tables and lists in foreign buffers. For example, in an HTML buffer, +write a list in Org syntax, select it, and convert it to HTML with +{{{kbd(M-x org-html-convert-region-to-html)}}}. + +*** Exporting to minimal HTML +:PROPERTIES: +:DESCRIPTION: Exporting HTML without CSS, Javascript, etc. +:ALT_TITLE: Bare HTML +:END: + +If you want to output a minimal HTML file, with no CSS, no Javascript, +no preamble or postamble, here are the variable you would need to set: + +#+vindex: org-html-head +#+vindex: org-html-head-extra +#+vindex: org-html-head-include-default-style +#+vindex: org-html-head-include-scripts +#+vindex: org-html-preamble +#+vindex: org-html-postamble +#+vindex: org-html-use-infojs +#+begin_src emacs-lisp +(setq org-html-head "" + org-html-head-extra "" + org-html-head-include-default-style nil + org-html-head-include-scripts nil + org-html-preamble nil + org-html-postamble nil + org-html-use-infojs nil) +#+end_src + +* Publishing +:PROPERTIES: +:DESCRIPTION: Create a web site of linked Org files. +:END: +#+cindex: publishing + +Org includes a publishing management system that allows you to +configure automatic HTML conversion of /projects/ composed of +interlinked Org files. You can also configure Org to automatically +upload your exported HTML pages and related attachments, such as +images and source code files, to a web server. + +You can also use Org to convert files into PDF, or even combine HTML +and PDF conversion so that files are available in both formats on the +server. + +Publishing has been contributed to Org by David O'Toole. + +** Configuration +:PROPERTIES: +:DESCRIPTION: Defining projects. +:END: +Publishing needs significant configuration to specify files, +destination and many other properties of a project. + +*** The variable ~org-publish-project-alist~ +:PROPERTIES: +:DESCRIPTION: The central configuration variable. +:ALT_TITLE: Project alist +:END: +#+cindex: projects, for publishing + +#+vindex: org-publish-project-alist +Publishing is configured almost entirely through setting the value of +one variable, called ~org-publish-project-alist~. Each element of the +list configures one project, and may be in one of the two following +forms: + +#+begin_src emacs-lisp +("project-name" :property value :property value ...) +#+end_src + +#+texinfo: @noindent +i.e., a well-formed property list with alternating keys and values, +or: + +#+begin_src emacs-lisp +("project-name" :components ("project-name" "project-name" ...)) +#+end_src + +In both cases, projects are configured by specifying property values. +A project defines the set of files that are to be published, as well +as the publishing configuration to use when publishing those files. +When a project takes the second form listed above, the individual +members of the ~:components~ property are taken to be sub-projects, +which group together files requiring different publishing options. +When you publish such a "meta-project", all the components are also +published, in the sequence given. + +*** Sources and destinations for files +:PROPERTIES: +:DESCRIPTION: From here to there. +:ALT_TITLE: Sources and destinations +:END: +#+cindex: directories, for publishing + +Most properties are optional, but some should always be set. In +particular, Org needs to know where to look for source files, and +where to put published files. + +- ~:base-directory~ :: + + Directory containing publishing source files. + +- ~:publishing-directory~ :: + + Directory where output files are published. You can directly + publish to a webserver using a file name syntax appropriate for the + Emacs tramp package. Or you can publish to a local directory and + use external tools to upload your website (see [[*Uploading Files]]). + +- ~:preparation-function~ :: + + Function or list of functions to be called before starting the + publishing process, for example, to run =make= for updating files to + be published. Each preparation function is called with a single + argument, the project property list. + +- ~:completion-function~ :: + + Function or list of functions called after finishing the publishing + process, for example, to change permissions of the resulting files. + Each completion function is called with a single argument, the + project property list. + +*** Selecting files +:PROPERTIES: +:DESCRIPTION: What files are part of the project? +:END: +#+cindex: files, selecting for publishing + +By default, all files with extension =.org= in the base directory are +considered part of the project. This can be modified by setting the +following properties + +- ~:base-extension~ :: + + Extension---without the dot---of source files. This actually is + a regular expression. Set this to the symbol ~any~ if you want to + get all files in ~:base-directory~, even without extension. + +- ~:exclude~ :: + + Regular expression to match file names that should not be published, + even though they have been selected on the basis of their extension. + +- ~:include~ :: + + List of files to be included regardless of ~:base-extension~ and + ~:exclude~. + +- ~:recursive~ :: + + Non-~nil~ means, check base-directory recursively for files to + publish. + +*** Publishing action +:PROPERTIES: +:DESCRIPTION: Setting the function doing the publishing. +:END: +#+cindex: action, for publishing + +Publishing means that a file is copied to the destination directory +and possibly transformed in the process. The default transformation +is to export Org files as HTML files, and this is done by the function +~org-html-publish-to-html~ which calls the HTML exporter (see [[*HTML +Export]]). But you can also publish your content as PDF files using +~org-latex-publish-to-pdf~, or as ASCII, Texinfo, etc., using the +corresponding functions. + +If you want to publish the Org file as an =.org= file but with +/archived/, /commented/, and /tag-excluded/ trees removed, use +~org-org-publish-to-org~. This produces =file.org= and puts it in the +publishing directory. If you want a htmlized version of this file, +set the parameter ~:htmlized-source~ to ~t~. It produces +=file.org.html= in the publishing directory[fn:141]. + +Other files like images only need to be copied to the publishing +destination; for this you can use ~org-publish-attachment~. For +non-Org files, you always need to specify the publishing function: + +- ~:publishing-function~ :: + + Function executing the publication of a file. This may also be + a list of functions, which are all called in turn. + +- ~:htmlized-source~ :: + + Non-~nil~ means, publish htmlized source. + +The function must accept three arguments: a property list containing +at least a ~:publishing-directory~ property, the name of the file to +be published, and the path to the publishing directory of the output +file. It should take the specified file, make the necessary +transformation, if any, and place the result into the destination +folder. + +*** Options for the exporters +:PROPERTIES: +:DESCRIPTION: Tweaking HTML/@LaTeX{} export. +:ALT_TITLE: Publishing options +:END: +#+cindex: options, for publishing +#+cindex: publishing options + +The property list can be used to set many export options for the HTML +and LaTeX exporters. In most cases, these properties correspond to +user variables in Org. The table below lists these properties along +with the variable they belong to. See the documentation string for +the respective variable for details. + +#+vindex: org-publish-project-alist +When a property is given a value in ~org-publish-project-alist~, its +setting overrides the value of the corresponding user variable, if +any, during publishing. Options set within a file (see [[*Export +Settings]]), however, override everything. + +**** Generic properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:archived-trees~ | ~org-export-with-archived-trees~ | +| ~:exclude-tags~ | ~org-export-exclude-tags~ | +| ~:headline-levels~ | ~org-export-headline-levels~ | +| ~:language~ | ~org-export-default-language~ | +| ~:preserve-breaks~ | ~org-export-preserve-breaks~ | +| ~:section-numbers~ | ~org-export-with-section-numbers~ | +| ~:select-tags~ | ~org-export-select-tags~ | +| ~:with-author~ | ~org-export-with-author~ | +| ~:with-broken-links~ | ~org-export-with-broken-links~ | +| ~:with-clocks~ | ~org-export-with-clocks~ | +| ~:with-creator~ | ~org-export-with-creator~ | +| ~:with-date~ | ~org-export-with-date~ | +| ~:with-drawers~ | ~org-export-with-drawers~ | +| ~:with-email~ | ~org-export-with-email~ | +| ~:with-emphasize~ | ~org-export-with-emphasize~ | +| ~:with-fixed-width~ | ~org-export-with-fixed-width~ | +| ~:with-footnotes~ | ~org-export-with-footnotes~ | +| ~:with-latex~ | ~org-export-with-latex~ | +| ~:with-planning~ | ~org-export-with-planning~ | +| ~:with-priority~ | ~org-export-with-priority~ | +| ~:with-properties~ | ~org-export-with-properties~ | +| ~:with-special-strings~ | ~org-export-with-special-strings~ | +| ~:with-sub-superscript~ | ~org-export-with-sub-superscripts~ | +| ~:with-tables~ | ~org-export-with-tables~ | +| ~:with-tags~ | ~org-export-with-tags~ | +| ~:with-tasks~ | ~org-export-with-tasks~ | +| ~:with-timestamps~ | ~org-export-with-timestamps~ | +| ~:with-title~ | ~org-export-with-title~ | +| ~:with-toc~ | ~org-export-with-toc~ | +| ~:with-todo-keywords~ | ~org-export-with-todo-keywords~ | + +**** ASCII specific properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:ascii-bullets~ | ~org-ascii-bullets~ | +| ~:ascii-caption-above~ | ~org-ascii-caption-above~ | +| ~:ascii-charset~ | ~org-ascii-charset~ | +| ~:ascii-global-margin~ | ~org-ascii-global-margin~ | +| ~:ascii-format-drawer-function~ | ~org-ascii-format-drawer-function~ | +| ~:ascii-format-inlinetask-function~ | ~org-ascii-format-inlinetask-function~ | +| ~:ascii-headline-spacing~ | ~org-ascii-headline-spacing~ | +| ~:ascii-indented-line-width~ | ~org-ascii-indented-line-width~ | +| ~:ascii-inlinetask-width~ | ~org-ascii-inlinetask-width~ | +| ~:ascii-inner-margin~ | ~org-ascii-inner-margin~ | +| ~:ascii-links-to-notes~ | ~org-ascii-links-to-notes~ | +| ~:ascii-list-margin~ | ~org-ascii-list-margin~ | +| ~:ascii-paragraph-spacing~ | ~org-ascii-paragraph-spacing~ | +| ~:ascii-quote-margin~ | ~org-ascii-quote-margin~ | +| ~:ascii-table-keep-all-vertical-lines~ | ~org-ascii-table-keep-all-vertical-lines~ | +| ~:ascii-table-use-ascii-art~ | ~org-ascii-table-use-ascii-art~ | +| ~:ascii-table-widen-columns~ | ~org-ascii-table-widen-columns~ | +| ~:ascii-text-width~ | ~org-ascii-text-width~ | +| ~:ascii-underline~ | ~org-ascii-underline~ | +| ~:ascii-verbatim-format~ | ~org-ascii-verbatim-format~ | + +**** Beamer specific properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:beamer-theme~ | ~org-beamer-theme~ | +| ~:beamer-column-view-format~ | ~org-beamer-column-view-format~ | +| ~:beamer-environments-extra~ | ~org-beamer-environments-extra~ | +| ~:beamer-frame-default-options~ | ~org-beamer-frame-default-options~ | +| ~:beamer-outline-frame-options~ | ~org-beamer-outline-frame-options~ | +| ~:beamer-outline-frame-title~ | ~org-beamer-outline-frame-title~ | +| ~:beamer-subtitle-format~ | ~org-beamer-subtitle-format~ | + +**** HTML specific properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:html-allow-name-attribute-in-anchors~ | ~org-html-allow-name-attribute-in-anchors~ | +| ~:html-checkbox-type~ | ~org-html-checkbox-type~ | +| ~:html-container~ | ~org-html-container-element~ | +| ~:html-divs~ | ~org-html-divs~ | +| ~:html-doctype~ | ~org-html-doctype~ | +| ~:html-extension~ | ~org-html-extension~ | +| ~:html-footnote-format~ | ~org-html-footnote-format~ | +| ~:html-footnote-separator~ | ~org-html-footnote-separator~ | +| ~:html-footnotes-section~ | ~org-html-footnotes-section~ | +| ~:html-format-drawer-function~ | ~org-html-format-drawer-function~ | +| ~:html-format-headline-function~ | ~org-html-format-headline-function~ | +| ~:html-format-inlinetask-function~ | ~org-html-format-inlinetask-function~ | +| ~:html-head-extra~ | ~org-html-head-extra~ | +| ~:html-head-include-default-style~ | ~org-html-head-include-default-style~ | +| ~:html-head-include-scripts~ | ~org-html-head-include-scripts~ | +| ~:html-head~ | ~org-html-head~ | +| ~:html-home/up-format~ | ~org-html-home/up-format~ | +| ~:html-html5-fancy~ | ~org-html-html5-fancy~ | +| ~:html-indent~ | ~org-html-indent~ | +| ~:html-infojs-options~ | ~org-html-infojs-options~ | +| ~:html-infojs-template~ | ~org-html-infojs-template~ | +| ~:html-inline-image-rules~ | ~org-html-inline-image-rules~ | +| ~:html-inline-images~ | ~org-html-inline-images~ | +| ~:html-link-home~ | ~org-html-link-home~ | +| ~:html-link-org-files-as-html~ | ~org-html-link-org-files-as-html~ | +| ~:html-link-up~ | ~org-html-link-up~ | +| ~:html-link-use-abs-url~ | ~org-html-link-use-abs-url~ | +| ~:html-mathjax-options~ | ~org-html-mathjax-options~ | +| ~:html-mathjax-template~ | ~org-html-mathjax-template~ | +| ~:html-equation-reference-format~ | ~org-html-equation-reference-format~ | +| ~:html-metadata-timestamp-format~ | ~org-html-metadata-timestamp-format~ | +| ~:html-postamble-format~ | ~org-html-postamble-format~ | +| ~:html-postamble~ | ~org-html-postamble~ | +| ~:html-preamble-format~ | ~org-html-preamble-format~ | +| ~:html-preamble~ | ~org-html-preamble~ | +| ~:html-self-link-headlines~ | ~org-html-self-link-headlines~ | +| ~:html-table-align-individual-field~ | ~de{org-html-table-align-individual-fields~ | +| ~:html-table-attributes~ | ~org-html-table-default-attributes~ | +| ~:html-table-caption-above~ | ~org-html-table-caption-above~ | +| ~:html-table-data-tags~ | ~org-html-table-data-tags~ | +| ~:html-table-header-tags~ | ~org-html-table-header-tags~ | +| ~:html-table-row-tags~ | ~org-html-table-row-tags~ | +| ~:html-table-use-header-tags-for-first-column~ | ~org-html-table-use-header-tags-for-first-column~ | +| ~:html-tag-class-prefix~ | ~org-html-tag-class-prefix~ | +| ~:html-text-markup-alist~ | ~org-html-text-markup-alist~ | +| ~:html-todo-kwd-class-prefix~ | ~org-html-todo-kwd-class-prefix~ | +| ~:html-toplevel-hlevel~ | ~org-html-toplevel-hlevel~ | +| ~:html-use-infojs~ | ~org-html-use-infojs~ | +| ~:html-validation-link~ | ~org-html-validation-link~ | +| ~:html-viewport~ | ~org-html-viewport~ | +| ~:html-wrap-src-lines~ | ~org-html-wrap-src-lines~ | +| ~:html-xml-declaration~ | ~org-html-xml-declaration~ | + +**** LaTeX specific properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:latex-active-timestamp-format~ | ~org-latex-active-timestamp-format~ | +| ~:latex-caption-above~ | ~org-latex-caption-above~ | +| ~:latex-classes~ | ~org-latex-classes~ | +| ~:latex-class~ | ~org-latex-default-class~ | +| ~:latex-compiler~ | ~org-latex-compiler~ | +| ~:latex-default-figure-position~ | ~org-latex-default-figure-position~ | +| ~:latex-default-table-environment~ | ~org-latex-default-table-environment~ | +| ~:latex-default-table-mode~ | ~org-latex-default-table-mode~ | +| ~:latex-diary-timestamp-format~ | ~org-latex-diary-timestamp-format~ | +| ~:latex-footnote-defined-format~ | ~org-latex-footnote-defined-format~ | +| ~:latex-footnote-separator~ | ~org-latex-footnote-separator~ | +| ~:latex-format-drawer-function~ | ~org-latex-format-drawer-function~ | +| ~:latex-format-headline-function~ | ~org-latex-format-headline-function~ | +| ~:latex-format-inlinetask-function~ | ~org-latex-format-inlinetask-function~ | +| ~:latex-hyperref-template~ | ~org-latex-hyperref-template~ | +| ~:latex-image-default-height~ | ~org-latex-image-default-height~ | +| ~:latex-image-default-option~ | ~org-latex-image-default-option~ | +| ~:latex-image-default-width~ | ~org-latex-image-default-width~ | +| ~:latex-images-centered~ | ~org-latex-images-centered~ | +| ~:latex-inactive-timestamp-format~ | ~org-latex-inactive-timestamp-format~ | +| ~:latex-inline-image-rules~ | ~org-latex-inline-image-rules~ | +| ~:latex-link-with-unknown-path-format~ | ~org-latex-link-with-unknown-path-format~ | +| ~:latex-listings-langs~ | ~org-latex-listings-langs~ | +| ~:latex-listings-options~ | ~org-latex-listings-options~ | +| ~:latex-listings~ | ~org-latex-listings~ | +| ~:latex-minted-langs~ | ~org-latex-minted-langs~ | +| ~:latex-minted-options~ | ~org-latex-minted-options~ | +| ~:latex-prefer-user-labels~ | ~org-latex-prefer-user-labels~ | +| ~:latex-subtitle-format~ | ~org-latex-subtitle-format~ | +| ~:latex-subtitle-separate~ | ~org-latex-subtitle-separate~ | +| ~:latex-table-scientific-notation~ | ~org-latex-table-scientific-notation~ | +| ~:latex-tables-booktabs~ | ~org-latex-tables-booktabs~ | +| ~:latex-tables-centered~ | ~org-latex-tables-centered~ | +| ~:latex-text-markup-alist~ | ~org-latex-text-markup-alist~ | +| ~:latex-title-command~ | ~org-latex-title-command~ | +| ~:latex-toc-command~ | ~org-latex-toc-command~ | + +**** Markdown specific properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:md-footnote-format~ | ~org-md-footnote-format~ | +| ~:md-footnotes-section~ | ~org-md-footnotes-section~ | +| ~:md-headline-style~ | ~org-md-headline-style~ | + +**** ODT specific properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:odt-content-template-file~ | ~org-odt-content-template-file~ | +| ~:odt-display-outline-level~ | ~org-odt-display-outline-level~ | +| ~:odt-fontify-srcblocks~ | ~org-odt-fontify-srcblocks~ | +| ~:odt-format-drawer-function~ | ~org-odt-format-drawer-function~ | +| ~:odt-format-headline-function~ | ~org-odt-format-headline-function~ | +| ~:odt-format-inlinetask-function~ | ~org-odt-format-inlinetask-function~ | +| ~:odt-inline-formula-rules~ | ~org-odt-inline-formula-rules~ | +| ~:odt-inline-image-rules~ | ~org-odt-inline-image-rules~ | +| ~:odt-pixels-per-inch~ | ~org-odt-pixels-per-inch~ | +| ~:odt-styles-file~ | ~org-odt-styles-file~ | +| ~:odt-table-styles~ | ~org-odt-table-styles~ | +| ~:odt-use-date-fields~ | ~org-odt-use-date-fields~ | + +**** Texinfo specific properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +| ~:texinfo-active-timestamp-format~ | ~org-texinfo-active-timestamp-format~ | +| ~:texinfo-classes~ | ~org-texinfo-classes~ | +| ~:texinfo-class~ | ~org-texinfo-default-class~ | +| ~:texinfo-table-default-markup~ | ~org-texinfo-table-default-markup~ | +| ~:texinfo-diary-timestamp-format~ | ~org-texinfo-diary-timestamp-format~ | +| ~:texinfo-filename~ | ~org-texinfo-filename~ | +| ~:texinfo-format-drawer-function~ | ~org-texinfo-format-drawer-function~ | +| ~:texinfo-format-headline-function~ | ~org-texinfo-format-headline-function~ | +| ~:texinfo-format-inlinetask-function~ | ~org-texinfo-format-inlinetask-function~ | +| ~:texinfo-inactive-timestamp-format~ | ~org-texinfo-inactive-timestamp-format~ | +| ~:texinfo-link-with-unknown-path-format~ | ~org-texinfo-link-with-unknown-path-format~ | +| ~:texinfo-node-description-column~ | ~org-texinfo-node-description-column~ | +| ~:texinfo-table-scientific-notation~ | ~org-texinfo-table-scientific-notation~ | +| ~:texinfo-tables-verbatim~ | ~org-texinfo-tables-verbatim~ | +| ~:texinfo-text-markup-alist~ | ~org-texinfo-text-markup-alist~ | + +*** Publishing links +:PROPERTIES: +:DESCRIPTION: Which links keep working after publishing? +:END: +#+cindex: links, publishing + +To create a link from one Org file to another, you would use something +like =[[file:foo.org][The foo]]= or simply =[[file:foo.org]]= (see [[*External Links]]). When +published, this link becomes a link to =foo.html=. You can thus +interlink the pages of your "Org web" project and the links will work +as expected when you publish them to HTML. If you also publish the +Org source file and want to link to it, use an =http= link instead of +a =file:= link, because =file= links are converted to link to the +corresponding =.html= file. + +You may also link to related files, such as images. Provided you are +careful with relative file names, and provided you have also +configured Org to upload the related files, these links will work too. +See [[*Example: complex publishing configuration]], for an example of this +usage. + +Eventually, links between published documents can contain some search +options (see [[*Search Options in File Links]]), which will be resolved to +the appropriate location in the linked file. For example, once +published to HTML, the following links all point to a dedicated anchor +in =foo.html=. + +#+begin_example +[[file:foo.org::*heading]] +[[file:foo.org::#custom-id]] +[[file:foo.org::target]] +#+end_example + +*** Generating a sitemap +:PROPERTIES: +:DESCRIPTION: Generating a list of all pages. +:ALT_TITLE: Site map +:END: +#+cindex: sitemap, of published pages + +The following properties may be used to control publishing of +a map of files for a given project. + +- ~:auto-sitemap~ :: + + When non-~nil~, publish a sitemap during + ~org-publish-current-project~ or ~org-publish-all~. + +- ~:sitemap-filename~ :: + + Filename for output of sitemap. Defaults to =sitemap.org=, which + becomes =sitemap.html=. + +- ~:sitemap-title~ :: + + Title of sitemap page. Defaults to name of file. + +- ~:sitemap-format-entry~ :: + + #+findex: org-publish-find-date + #+findex: org-publish-find-property + #+findex: org-publish-find-title + With this option one can tell how a site-map entry is formatted in + the site-map. It is a function called with three arguments: the + file or directory name relative to base directory of the project, + the site-map style and the current project. It is expected to + return a string. Default value turns file names into links and use + document titles as descriptions. For specific formatting needs, one + can use ~org-publish-find-date~, ~org-publish-find-title~ and + ~org-publish-find-property~, to retrieve additional information + about published documents. + +- ~:sitemap-function~ :: + + Plug-in function to use for generation of the sitemap. It is called + with two arguments: the title of the site-map and a representation + of the files and directories involved in the project as a nested + list, which can further be transformed using ~org-list-to-generic~, + ~org-list-to-subtree~ and alike. Default value generates a plain + list of links to all files in the project. + +- ~:sitemap-sort-folders~ :: + + Where folders should appear in the sitemap. Set this to ~first~ + (default) or ~last~ to display folders first or last, respectively. + When set to ~ignore~, folders are ignored altogether. Any other + value mixes files and folders. This variable has no effect when + site-map style is ~tree~. + +- ~:sitemap-sort-files~ :: + + How the files are sorted in the site map. Set this to + ~alphabetically~ (default), ~chronologically~ or + ~anti-chronologically~. ~chronologically~ sorts the files with + older date first while ~anti-chronologically~ sorts the files with + newer date first. ~alphabetically~ sorts the files alphabetically. + The date of a file is retrieved with ~org-publish-find-date~. + +- ~:sitemap-ignore-case~ :: + + Should sorting be case-sensitive? Default ~nil~. + +- ~:sitemap-file-entry-format~ :: + + With this option one can tell how a sitemap's entry is formatted in + the sitemap. This is a format string with some escape sequences: + ~%t~ stands for the title of the file, ~%a~ stands for the author of + the file and ~%d~ stands for the date of the file. The date is + retrieved with the ~org-publish-find-date~ function and formatted + with ~org-publish-sitemap-date-format~. Default ~%t~. + +- ~:sitemap-date-format~ :: + + Format string for the ~format-time-string~ function that tells how + a sitemap entry's date is to be formatted. This property bypasses + ~org-publish-sitemap-date-format~ which defaults to ~%Y-%m-%d~. + +*** Generating an index +:PROPERTIES: +:DESCRIPTION: An index that reaches across pages. +:END: +#+cindex: index, in a publishing project + +Org mode can generate an index across the files of a publishing project. + +- ~:makeindex~ :: + + When non-~nil~, generate in index in the file =theindex.org= and + publish it as =theindex.html=. + +The file is created when first publishing a project with the +~:makeindex~ set. The file only contains a statement =#+INCLUDE: +"theindex.inc"=. You can then build around this include statement by +adding a title, style information, etc. + +#+cindex: @samp{INDEX}, keyword +Index entries are specified with =INDEX= keyword. An entry that +contains an exclamation mark creates a sub item. + +#+begin_example +,*** Curriculum Vitae +,#+INDEX: CV +,#+INDEX: Application!CV +#+end_example + +** Uploading Files +:PROPERTIES: +:DESCRIPTION: How to get files up on the server. +:END: +#+cindex: rsync +#+cindex: unison + +For those people already utilizing third party sync tools such as +Rsync or Unison, it might be preferable not to use the built-in remote +publishing facilities of Org mode which rely heavily on Tramp. Tramp, +while very useful and powerful, tends not to be so efficient for +multiple file transfer and has been known to cause problems under +heavy usage. + +Specialized synchronization utilities offer several advantages. In +addition to timestamp comparison, they also do content and +permissions/attribute checks. For this reason you might prefer to +publish your web to a local directory---possibly even /in place/ with +your Org files---and then use Unison or Rsync to do the +synchronization with the remote host. + +Since Unison, for example, can be configured as to which files to +transfer to a certain remote destination, it can greatly simplify the +project publishing definition. Simply keep all files in the correct +location, process your Org files with ~org-publish~ and let the +synchronization tool do the rest. You do not need, in this scenario, +to include attachments such as JPG, CSS or PNG files in the project +definition since the third-party tool syncs them. + +Publishing to a local directory is also much faster than to a remote +one, so that you can afford more easily to republish entire projects. +If you set ~org-publish-use-timestamps-flag~ to ~nil~, you gain the +main benefit of re-including any changed external files such as source +example files you might include with =INCLUDE= keyword. The timestamp +mechanism in Org is not smart enough to detect if included files have +been modified. + +** Sample Configuration +:PROPERTIES: +:DESCRIPTION: Example projects. +:END: + +Below we provide two example configurations. The first one is +a simple project publishing only a set of Org files. The second +example is more complex, with a multi-component project. + +*** Example: simple publishing configuration +:PROPERTIES: +:DESCRIPTION: One-component publishing. +:ALT_TITLE: Simple example +:END: + +This example publishes a set of Org files to the =public_html= +directory on the local machine. + +#+begin_src emacs-lisp +(setq org-publish-project-alist + '(("org" + :base-directory "~/org/" + :publishing-function org-html-publish-to-html + :publishing-directory "~/public_html" + :section-numbers nil + :with-toc nil + :html-head ""))) +#+end_src + +*** Example: complex publishing configuration +:PROPERTIES: +:DESCRIPTION: A multi-component publishing example. +:ALT_TITLE: Complex example +:END: + +This more complicated example publishes an entire website, including +Org files converted to HTML, image files, Emacs Lisp source code, and +style sheets. The publishing directory is remote and private files +are excluded. + +To ensure that links are preserved, care should be taken to replicate +your directory structure on the web server, and to use relative file +paths. For example, if your Org files are kept in =~/org/= and your +publishable images in =~/images/=, you would link to an image with + +: file:../images/myimage.png + +On the web server, the relative path to the image should be the same. +You can accomplish this by setting up an =images/= folder in the right +place on the web server, and publishing images to it. + +#+begin_src emacs-lisp +(setq org-publish-project-alist + '(("orgfiles" + :base-directory "~/org/" + :base-extension "org" + :publishing-directory "/ssh:user@host:~/html/notebook/" + :publishing-function org-html-publish-to-html + :exclude "PrivatePage.org" ;; regexp + :headline-levels 3 + :section-numbers nil + :with-toc nil + :html-head "" + :html-preamble t) + + ("images" + :base-directory "~/images/" + :base-extension "jpg\\|gif\\|png" + :publishing-directory "/ssh:user@host:~/html/images/" + :publishing-function org-publish-attachment) + + ("other" + :base-directory "~/other/" + :base-extension "css\\|el" + :publishing-directory "/ssh:user@host:~/html/other/" + :publishing-function org-publish-attachment) + ("website" :components ("orgfiles" "images" "other")))) +#+end_src + +** Triggering Publication +:PROPERTIES: +:DESCRIPTION: Publication commands. +:END: + +Once properly configured, Org can publish with the following commands: + +- {{{kbd(C-c C-e P x)}}} (~org-publish~) :: + + #+kindex: C-c C-e P x + #+findex: org-publish + Prompt for a specific project and publish all files that belong to + it. + +- {{{kbd(C-c C-e P p)}}} (~org-publish-current-project~) :: + + #+kindex: C-c C-e P p + #+findex: org-publish-current-project + Publish the project containing the current file. + +- {{{kbd(C-c C-e P f)}}} (~org-publish-current-file~) :: + + #+kindex: C-c C-e P f + #+findex: org-publish-current-file + Publish only the current file. + +- {{{kbd(C-c C-e P a)}}} (~org-publish-all~) :: + + #+kindex: C-c C-e P a + #+findex: org-publish-all + Publish every project. + +#+vindex: org-publish-use-timestamps-flag +Org uses timestamps to track when a file has changed. The above +functions normally only publish changed files. You can override this +and force publishing of all files by giving a prefix argument to any +of the commands above, or by customizing the variable +~org-publish-use-timestamps-flag~. This may be necessary in +particular if files include other files via =SETUPFILE= or =INCLUDE= +keywords. + +* Citation handling +:PROPERTIES: +:DESCRIPTION: create, follow and export citations. +:END: +#+cindex: citation + +The =oc.el= library provides tooling to handle citations in Org via +"citation processors" that offer some or all of the following +capabilities: + +- activate :: Fontification, tooltip preview, etc. +- follow :: At-point actions on citations via ~org-open-at-point~. +- insert :: Add and edit citations via ~org-cite-insert~. +- export :: Via different libraries for different target formats. + +The user can configure these with ~org-cite-activate-processor~, +~org-cite-follow-processor~, ~org-cite-insert-processor~, and +~org-cite-export-processors~ respectively. + +The included "basic" processor provides all four capabilities. + +** Citations + +Before adding citations, first set one-or-more bibliographies, either +globally with ~org-cite-global-bibliography~, or locally using one or +more "bibliography" keywords. + +#+begin_example +#+bibliography: SomeFile.bib +#+bibliography: /some/other/file.json +#+bibliography: "/some/file/with spaces/in its name.bib" +#+end_example + +#+kindex: C-c C-x @@ +#+findex: org-cite-insert +One can then insert and edit citations using ~org-cite-insert~, called +with {{{kbd(C-c C-x @)}}}. + +A /citation/ requires one or more citation /key(s)/, elements +identifying a reference in the bibliography. + +- Each citation is surrounded by brackets and uses the =cite= type. + +- Each key starts with the character =@=. + +- Each key can be qualified by a /prefix/ (e.g.\nbsp{}"see ") and/or + a /suffix/ (e.g.\nbsp{}"p.\nbsp{}123"), giving information useful or necessary + fo the comprehension of the citation but not included in the + reference. + +- A single citation can cite more than one reference ; the keys are + separated by semicolons ; the formatting of such citation groups is + specified by the style. + +- One can also specify a stylistic variation for the citations by + inserting a =/= and a style name between the =cite= keyword and the + colon; this usually makes sense only for the author-year styles. + +: [cite/style:common prefix ;prefix @key suffix; ... ; common suffix] + +The only mandatory elements are: + +- The =cite= keyword and the colon. +- The =@= character immediately preceding each key. +- The brackets surrounding the citation(s) (group). + +** Citation export processors + +Org currently includes the following export processors: + +- Two processors can export to a variety of formats, including =latex= + (and therefore =pdf=), =html=, =odt= and plain (UTF8) text: + + - basic :: a basic export processor, well adapted to situations + where backward compatibility is not a requirement and formatting + needs are minimal; + + - csl :: this export processor uses format files written in [[https://en.wikipedia.org/wiki/Citation_Style_Language][Citation + Style Language]] via [[https://github.com/andras-simonyi/citeproc-el][citeproc-el]]; + +- In contrast, two other processors target LaTeX and LaTeX-derived + formats exclusively: + + - natbib :: this export processor uses BibTeX, the historical + bibliographic processor used with LaTeX, thus allowing the use of + data and style files compatible with this processor (including + a large number of publishers' styles). It uses citation commands + implemented in the LaTeX package =natbib=, allowing more stylistic + variants that LaTeX's =\cite= command. + + - biblatex :: this backend allows the use of data and formats + prepared for BibLaTeX, an alternate bibliographic processor used + with LaTeX, which overcomes some serious BibTeX limitations, but + has not (yet?)\nbsp{}been widely adopted by publishers. + +The =CITE_EXPORT= keyword specifies the export processor and the +citation (and possibly reference) style(s); for example (all arguments +are optional) + +: #+cite_export: basic author author-year + +#+texinfo: @noindent +specifies the "basic" export processor with citations inserted as +author's name and references indexed by author's names and year; + +: #+cite_export: csl /some/path/to/vancouver-brackets.csl + +#+texinfo: @noindent +specifies the "csl" processor and CSL style, which in this case +defines numeric citations and numeric references according to the +=Vancouver= specification (as style used in many medical journals), +following a typesetting variation putting citations between brackets; + +: #+cite_export: natbib kluwer + +#+texinfo: @noindent +specifies the =natbib= export processor with a label citation style +conformant to the Harvard style and the specification of the +Wolkers-Kluwer publisher; since it relies on the ~bibtex~ processor of +your LaTeX installation, it won't export to anything but PDF. + +* Working with Source Code +:PROPERTIES: +:DESCRIPTION: Export, evaluate, and tangle code blocks. +:END: +#+cindex: source code, working with + +Source code here refers to any plain text collection of computer +instructions, possibly with comments, written using a human-readable +programming language. Org can manage source code in an Org document +when the source code is identified with begin and end markers. +Working with source code begins with identifying source code blocks. +A source code block can be placed almost anywhere in an Org document; +it is not restricted to the preamble or the end of the document. +However, Org cannot manage a source code block if it is placed inside +an Org comment or within a fixed width section. + +Here is an example source code block in the Emacs Lisp language: + +#+begin_example +,#+BEGIN_SRC emacs-lisp + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) +,#+END_SRC +#+end_example + +Source code blocks are one of many Org block types, which also include +"center", "comment", "dynamic", "example", "export", "quote", +"special", and "verse". This section pertains to blocks between +=#+BEGIN_SRC= and =#+END_SRC=. + +Details of Org's facilities for working with source code are described +in the following sections. + +** Features Overview +:PROPERTIES: +:DESCRIPTION: Enjoy the versatility of source blocks. +:END: + +Org can manage the source code in the block delimited by =#+BEGIN_SRC= +... =#+END_SRC= in several ways that can simplify housekeeping tasks +essential to modern source code maintenance. Org can edit, format, +extract, export, and publish source code blocks. Org can also compile +and execute a source code block, then capture the results. The Org +mode literature sometimes refers to source code blocks as /live code/ +blocks because they can alter the content of the Org document or the +material that it exports. Users can control the "liveliness" of each +source code block by tweaking the header arguments (see [[*Using Header +Arguments]]) for compiling, execution, extraction, and exporting. + +For editing and formatting a source code block, Org uses an +appropriate Emacs major mode that includes features specifically +designed for source code in that language. + +Org can extract one or more source code blocks and write them to one +or more source files---a process known as /tangling/ in literate +programming terminology. + +For exporting and publishing, Org's back-ends can format a source code +block appropriately, often with native syntax highlighting. + +For executing and compiling a source code block, the user can +configure Org to select the appropriate compiler. Org provides +facilities to collect the result of the execution or compiler output, +insert it into the Org document, and/or export it. In addition to +text results, Org can insert links to other data types, including +audio, video, and graphics. Org can also link a compiler error +message to the appropriate line in the source code block. + +An important feature of Org's management of source code blocks is the +ability to pass variables, functions, and results to one another using +a common syntax for source code blocks in any language. Although most +literate programming facilities are restricted to one language or +another, Org's language-agnostic approach lets the literate programmer +match each programming task with the appropriate computer language and +to mix them all together in a single Org document. This +interoperability among languages explains why Org's source code +management facility was named /Org Babel/ by its originators, Eric +Schulte and Dan Davison. + +Org mode fulfills the promise of easy verification and maintenance of +publishing reproducible research by keeping text, data, code, +configuration settings of the execution environment, the results of +the execution, and associated narratives, claims, references, and +internal and external links in a single Org document. + +** Structure of Code Blocks +:PROPERTIES: +:DESCRIPTION: Code block syntax described. +:END: +#+cindex: code block, structure +#+cindex: source code, block structure +#+cindex: @samp{NAME} keyword, in source blocks +#+cindex: @samp{BEGIN_SRC} + +Org offers two ways to structure source code in Org documents: in +a source code block, and directly inline. Both specifications are +shown below. + +A source code block conforms to this structure: + +#+begin_example +,#+NAME: +,#+BEGIN_SRC
+ +,#+END_SRC +#+end_example + +Do not be put-off by having to remember the source block syntax. Org +mode offers a command for wrapping existing text in a block (see +[[*Structure Templates]]). Org also works with other completion systems +in Emacs, some of which predate Org and have custom domain-specific +languages for defining templates. Regular use of templates reduces +errors, increases accuracy, and maintains consistency. + +#+cindex: source code, inline +An inline code block conforms to this structure: + +: src_{} + +#+texinfo: @noindent +or + +: src_[
]{} + +- =#+NAME: = :: + + Optional. Names the source block so it can be called, like + a function, from other source blocks or inline code to evaluate or + to capture the results. Code from other blocks, other files, and + from table formulas (see [[*The Spreadsheet]]) can use the name to + reference a source block. This naming serves the same purpose as + naming Org tables. Org mode requires unique names. For duplicate + names, Org mode's behavior is undefined. + +- =#+BEGIN_SRC= ... =#+END_SRC= :: + + Mandatory. They mark the start and end of a block that Org + requires. The =#+BEGIN_SRC= line takes additional arguments, as + described next. + +- == :: + + #+cindex: language, in code blocks + Mandatory. It is the identifier of the source code language in the + block. See [[*Languages]], for identifiers of supported languages. + +- == :: + + #+cindex: switches, in code blocks + Optional. Switches provide finer control of the code execution, + export, and format (see the discussion of switches in [[*Literal + Examples]]). + +- =
= :: + + #+cindex: header arguments, in code blocks + Optional. Heading arguments control many aspects of evaluation, + export and tangling of code blocks (see [[*Using Header Arguments]]). + Using Org's properties feature, header arguments can be selectively + applied to the entire buffer or specific sub-trees of the Org + document. + +- == :: + + Source code in the dialect of the specified language identifier. + +** Using Header Arguments +:PROPERTIES: +:DESCRIPTION: Different ways to set header arguments. +:END: + +Org comes with many header arguments common to all languages. New +header arguments are added for specific languages as they become +available for use in source code blocks. A header argument is +specified with an initial colon followed by the argument's name in +lowercase. + +Since header arguments can be set in several ways, Org prioritizes +them in case of overlaps or conflicts by giving local settings +a higher priority. Header values in function calls, for example, +override header values from global defaults. + +*** System-wide header arguments +:PROPERTIES: +:UNNUMBERED: notoc +:END: +#+vindex: org-babel-default-header-args + +#+vindex: org-babel-default-header-args +System-wide values of header arguments can be specified by customizing +the ~org-babel-default-header-args~ variable, which defaults to the +following values: + +#+begin_example +:session => "none" +:results => "replace" +:exports => "code" +:cache => "no" +:noweb => "no" +#+end_example + +The example below sets =:noweb= header arguments to =yes=, which makes +Org expand =:noweb= references by default. + +#+begin_src emacs-lisp +(setq org-babel-default-header-args + (cons '(:noweb . "yes") + (assq-delete-all :noweb org-babel-default-header-args))) +#+end_src + +#+cindex: language specific default header arguments +#+cindex: default header arguments per language +Each language can have separate default header arguments by +customizing the variable ~org-babel-default-header-args:~, where +{{{var()}}} is the name of the language. For details, see the +language-specific online documentation at +https://orgmode.org/worg/org-contrib/babel/. + +*** Header arguments in Org mode properties +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +For header arguments applicable to the buffer, use =PROPERTY= keyword +anywhere in the Org file (see [[*Property Syntax]]). + +The following example makes all the R code blocks execute in the same +session. Setting =:results= to =silent= ignores the results of +executions for all blocks, not just R code blocks; no results inserted +for any block. + +#+begin_example +,#+PROPERTY: header-args:R :session *R* +,#+PROPERTY: header-args :results silent +#+end_example + +#+vindex: org-use-property-inheritance +Header arguments set through Org's property drawers (see [[*Property +Syntax]]) apply at the sub-tree level on down. Since these property +drawers can appear anywhere in the file hierarchy, Org uses outermost +call or source block to resolve the values. Org ignores +~org-use-property-inheritance~ setting. + +In this example, =:cache= defaults to =yes= for all code blocks in the +sub-tree. + +#+begin_example +,* sample header + :PROPERTIES: + :header-args: :cache yes + :END: +#+end_example + +#+kindex: C-c C-x p +#+findex: org-set-property +Properties defined through ~org-set-property~ function, bound to +{{{kbd(C-c C-x p)}}}, apply to all active languages. They override +properties set in ~org-babel-default-header-args~. + +#+cindex: language specific header arguments properties +#+cindex: header arguments per language +Language-specific header arguments are also read from properties +=header-args:= where {{{var()}}} is the language +identifier. For example, + +#+begin_example +,* Heading + :PROPERTIES: + :header-args:clojure: :session *clojure-1* + :header-args:R: :session *R* + :END: +,** Subheading + :PROPERTIES: + :header-args:clojure: :session *clojure-2* + :END: +#+end_example + +#+texinfo: @noindent +would force separate sessions for Clojure blocks in =Heading= and +=Subheading=, but use the same session for all R blocks. Blocks in +=Subheading= inherit settings from =Heading=. + +*** Code block specific header arguments +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Header arguments are most commonly set at the source code block level, +on the =#+BEGIN_SRC= line. Arguments set at this level take +precedence over those set in the ~org-babel-default-header-args~ +variable, and also those set as header properties. + +In the following example, setting =:results= to =silent= makes it +ignore results of the code execution. Setting =:exports= to =code= +exports only the body of the code block to HTML or LaTeX. + +#+begin_example +,#+NAME: factorial +,#+BEGIN_SRC haskell :results silent :exports code :var n=0 + fac 0 = 1 + fac n = n * fac (n-1) +,#+END_SRC +#+end_example + +The same header arguments in an inline code block: + +: src_haskell[:exports both]{fac 5} + +#+cindex: @samp{HEADER}, keyword +Code block header arguments can span multiple lines using =#+HEADER:= +on each line. Note that Org currently accepts the plural spelling of +=#+HEADER:= only as a convenience for backward-compatibility. It may +be removed at some point. + +Multi-line header arguments on an unnamed code block: + +#+begin_example +,#+HEADER: :var data1=1 +,#+BEGIN_SRC emacs-lisp :var data2=2 + (message "data1:%S, data2:%S" data1 data2) +,#+END_SRC + +,#+RESULTS: +: data1:1, data2:2 +#+end_example + +Multi-line header arguments on a named code block: + +#+begin_example +,#+NAME: named-block +,#+HEADER: :var data=2 +,#+BEGIN_SRC emacs-lisp + (message "data:%S" data) +,#+END_SRC + +,#+RESULTS: named-block + : data:2 +#+end_example + +*** Header arguments in function calls +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Header arguments in function calls are the most specific and override +all other settings in case of an overlap. They get the highest +priority. Two =#+CALL:= examples are shown below. For the complete +syntax of =CALL= keyword, see [[*Evaluating Code Blocks]]. + +In this example, =:exports results= header argument is applied to the +evaluation of the =#+CALL:= line. + +: #+CALL: factorial(n=5) :exports results + +In this example, =:session special= header argument is applied to the +evaluation of =factorial= code block. + +: #+CALL: factorial[:session special](n=5) + +** Environment of a Code Block +:PROPERTIES: +:DESCRIPTION: Arguments, sessions, working directory... +:END: + +*** Passing arguments +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: passing arguments to code blocks +#+cindex: arguments, in code blocks +#+cindex: @samp{var}, header argument +Use =var= for passing arguments to source code blocks. The specifics +of variables in code blocks vary by the source language and are +covered in the language-specific documentation. The syntax for =var=, +however, is the same for all languages. This includes declaring +a variable, and assigning a default value. + +The following syntax is used to pass arguments to code blocks using +the =var= header argument. + +: :var NAME=ASSIGN + +#+texinfo: @noindent +{{{var(NAME)}}} is the name of the variable bound in the code block +body. {{{var(ASSIGN)}}} is a literal value, such as a string, +a number, a reference to a table, a list, a literal example, another +code block---with or without arguments---or the results of evaluating +a code block. {{{var(ASSIGN)}}} may specify a filename for references +to elements in a different file, using a =:= to separate the filename +from the reference. + +: :var NAME=FILE:REFERENCE + +Here are examples of passing values by reference: + +- table :: + + A table named with a =NAME= keyword. + + #+begin_example + ,#+NAME: example-table + | 1 | + | 2 | + | 3 | + | 4 | + + ,#+NAME: table-length + ,#+BEGIN_SRC emacs-lisp :var table=example-table + (length table) + ,#+END_SRC + + ,#+RESULTS: table-length + : 4 + #+end_example + + When passing a table, you can treat specially the row, or the + column, containing labels for the columns, or the rows, in the + table. + + #+cindex: @samp{colnames}, header argument + The =colnames= header argument accepts =yes=, =no=, or =nil= values. + The default value is =nil=: if an input table has column + names---because the second row is a horizontal rule---then Org + removes the column names, processes the table, puts back the column + names, and then writes the table to the results block. Using =yes=, + Org does the same to the first row, even if the initial table does + not contain any horizontal rule. When set to =no=, Org does not + pre-process column names at all. + + #+begin_example + ,#+NAME: less-cols + | a | + |---| + | b | + | c | + + ,#+BEGIN_SRC python :var tab=less-cols :colnames nil + return [[val + '*' for val in row] for row in tab] + ,#+END_SRC + + ,#+RESULTS: + | a | + |----| + | b* | + | c* | + #+end_example + + #+cindex: @samp{rownames}, header argument + Similarly, the =rownames= header argument can take two values: =yes= + or =no=. When set to =yes=, Org removes the first column, processes + the table, puts back the first column, and then writes the table to + the results block. The default is =no=, which means Org does not + pre-process the first column. Note that Emacs Lisp code blocks + ignore =rownames= header argument because of the ease of + table-handling in Emacs. + + #+begin_example + ,#+NAME: with-rownames + | one | 1 | 2 | 3 | 4 | 5 | + | two | 6 | 7 | 8 | 9 | 10 | + + ,#+BEGIN_SRC python :var tab=with-rownames :rownames yes + return [[val + 10 for val in row] for row in tab] + ,#+END_SRC + + ,#+RESULTS: + | one | 11 | 12 | 13 | 14 | 15 | + | two | 16 | 17 | 18 | 19 | 20 | + #+end_example + +To refer to a table in another file, join the filename and table name with +a colon, for example: =:var table=other-file.org:example-table=. + +- list :: + + A simple named list. + + #+begin_example + ,#+NAME: example-list + - simple + - not + - nested + - list + + ,#+BEGIN_SRC emacs-lisp :var x=example-list + (print x) + ,#+END_SRC + + ,#+RESULTS: + | simple | list | + #+end_example + + Note that only the top level list items are passed along. Nested + list items are ignored. + +- code block without arguments :: + + A code block name, as assigned by =NAME= keyword from the example + above, optionally followed by parentheses. + + #+begin_example + ,#+BEGIN_SRC emacs-lisp :var length=table-length() + (* 2 length) + ,#+END_SRC + + ,#+RESULTS: + : 8 + #+end_example + +- code block with arguments :: + + A code block name, as assigned by =NAME= keyword, followed by + parentheses and optional arguments passed within the parentheses. + + #+begin_example + ,#+NAME: double + ,#+BEGIN_SRC emacs-lisp :var input=8 + (* 2 input) + ,#+END_SRC + + ,#+RESULTS: double + : 16 + + ,#+NAME: squared + ,#+BEGIN_SRC emacs-lisp :var input=double(input=1) + (* input input) + ,#+END_SRC + + ,#+RESULTS: squared + : 4 + #+end_example + +- literal example :: + + A literal example block named with a =NAME= keyword. + + #+begin_example + ,#+NAME: literal-example + ,#+BEGIN_EXAMPLE + A literal example + on two lines + ,#+END_EXAMPLE + + ,#+NAME: read-literal-example + ,#+BEGIN_SRC emacs-lisp :var x=literal-example + (concatenate #'string x " for you.") + ,#+END_SRC + + ,#+RESULTS: read-literal-example + : A literal example + : on two lines for you. + #+end_example + +Indexing variable values enables referencing portions of a variable. +Indexes are 0 based with negative values counting backwards from the +end. If an index is separated by commas then each subsequent section +indexes as the next dimension. Note that this indexing occurs +/before/ other table-related header arguments are applied, such as +=hlines=, =colnames= and =rownames=. The following example assigns +the last cell of the first row the table =example-table= to the +variable =data=: + +#+begin_example +,#+NAME: example-table +| 1 | a | +| 2 | b | +| 3 | c | +| 4 | d | + +,#+BEGIN_SRC emacs-lisp :var data=example-table[0,-1] + data +,#+END_SRC + +,#+RESULTS: +: a +#+end_example + +Two integers separated by a colon reference a range of variable +values. In that case the entire inclusive range is referenced. For +example the following assigns the middle three rows of =example-table= +to =data=. + +#+begin_example +,#+NAME: example-table +| 1 | a | +| 2 | b | +| 3 | c | +| 4 | d | +| 5 | 3 | + +,#+BEGIN_SRC emacs-lisp :var data=example-table[1:3] + data +,#+END_SRC + +,#+RESULTS: +| 2 | b | +| 3 | c | +| 4 | d | +#+end_example + +To pick the entire range, use an empty index, or the single character +=*=. =0:-1= does the same thing. Example below shows how to +reference the first column only. + +#+begin_example +,#+NAME: example-table +| 1 | a | +| 2 | b | +| 3 | c | +| 4 | d | + +,#+BEGIN_SRC emacs-lisp :var data=example-table[,0] + data +,#+END_SRC + +,#+RESULTS: +| 1 | 2 | 3 | 4 | +#+end_example + +Index referencing can be used for tables and code blocks. Index +referencing can handle any number of dimensions. Commas delimit +multiple dimensions, as shown below. + +#+begin_example +,#+NAME: 3D +,#+BEGIN_SRC emacs-lisp + '(((1 2 3) (4 5 6) (7 8 9)) + ((10 11 12) (13 14 15) (16 17 18)) + ((19 20 21) (22 23 24) (25 26 27))) +,#+END_SRC + +,#+BEGIN_SRC emacs-lisp :var data=3D[1,,1] + data +,#+END_SRC + +,#+RESULTS: +| 11 | 14 | 17 | +#+end_example + +Note that row names and column names are not removed prior to variable +indexing. You need to take them into account, even when =colnames= or +=rownames= header arguments remove them. + +Emacs lisp code can also set the values for variables. To +differentiate a value from Lisp code, Org interprets any value +starting with =(=, =[=, ='= or =`= as Emacs Lisp code. The result of +evaluating that code is then assigned to the value of that variable. +The following example shows how to reliably query and pass the file +name of the Org mode buffer to a code block using headers. We need +reliability here because the file's name could change once the code in +the block starts executing. + +#+begin_example +,#+BEGIN_SRC sh :var filename=(buffer-file-name) :exports both + wc -w $filename +,#+END_SRC +#+end_example + +Note that values read from tables and lists are not mistakenly +evaluated as Emacs Lisp code, as illustrated in the following example. + +#+begin_example +,#+NAME: table +| (a b c) | + +,#+HEADER: :var data=table[0,0] +,#+BEGIN_SRC perl + $data +,#+END_SRC + +,#+RESULTS: +: (a b c) +#+end_example + +*** Using sessions +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: using sessions in code blocks +#+cindex: @samp{session}, header argument +Two code blocks can share the same environment. The =session= header +argument is for running multiple source code blocks under one session. +Org runs code blocks with the same session name in the same +interpreter process. + +- =none= :: + + Default. Each code block gets a new interpreter process to execute. + The process terminates once the block is evaluated. + +- {{{var(STRING)}}} :: + + Any string besides =none= turns that string into the name of that + session. For example, =:session STRING= names it =STRING=. If + =session= has no value, then the session name is derived from the + source language identifier. Subsequent blocks with the same source + code language use the same session. Depending on the language, + state variables, code from other blocks, and the overall interpreted + environment may be shared. Some interpreted languages support + concurrent sessions when subsequent source code language blocks + change session names. + +Only languages that provide interactive evaluation can have session +support. Not all languages provide this support, such as C and ditaa. +Even languages, such as Python and Haskell, that do support +interactive evaluation impose limitations on allowable language +constructs that can run interactively. Org inherits those limitations +for those code blocks running in a session. + +*** Choosing a working directory +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: working directory, in a code block +#+cindex: @samp{dir}, header argument +#+cindex: @samp{mkdirp}, header argument +The =dir= header argument specifies the default directory during code +block execution. If it is absent, then the directory associated with +the current buffer is used. In other words, supplying =:dir +DIRECTORY= temporarily has the same effect as changing the current +directory with {{{kbd(M-x cd RET DIRECTORY)}}}, and then not setting +=dir=. Under the surface, =dir= simply sets the value of the Emacs +variable ~default-directory~. Setting =mkdirp= header argument to +a non-~nil~ value creates the directory, if necessary. + +For example, to save the plot file in the =Work/= folder of the home +directory---notice tilde is expanded: + +#+begin_example +,#+BEGIN_SRC R :file myplot.png :dir ~/Work + matplot(matrix(rnorm(100), 10), type="l") +,#+END_SRC +#+end_example + +To evaluate the code block on a remote machine, supply a remote +directory name using Tramp syntax. For example: + +#+begin_example +,#+BEGIN_SRC R :file plot.png :dir /scp:dand@yakuba.princeton.edu: + plot(1:10, main=system("hostname", intern=TRUE)) +,#+END_SRC +#+end_example + +Org first captures the text results as usual for insertion in the Org +file. Then Org also inserts a link to the remote file, thanks to +Emacs Tramp. Org constructs the remote path to the file name from +=dir= and ~default-directory~, as illustrated here: + +: [[file:/scp:dand@yakuba.princeton.edu:/home/dand/plot.png][plot.png]] + +When =dir= is used with =session=, Org sets the starting directory for +a new session. But Org does not alter the directory of an already +existing session. + +Do not use =dir= with =:exports results= or with =:exports both= to +avoid Org inserting incorrect links to remote files. That is because +Org does not expand ~default directory~ to avoid some underlying +portability issues. + +*** Inserting headers and footers +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: headers, in code blocks +#+cindex: footers, in code blocks +#+cindex: @samp{prologue}, header argument +The =prologue= header argument is for appending to the top of the code +block for execution, like a reset instruction. For example, you may +use =:prologue "reset"= in a Gnuplot code block or, for every such +block: + +#+begin_src emacs-lisp +(add-to-list 'org-babel-default-header-args:gnuplot + '((:prologue . "reset"))) + +#+end_src + +#+cindex: @samp{epilogue}, header argument +Likewise, the value of the =epilogue= header argument is for appending +to the end of the code block for execution. + +** Evaluating Code Blocks +:PROPERTIES: +:DESCRIPTION: Place results of evaluation in the Org buffer. +:END: +#+cindex: code block, evaluating +#+cindex: source code, evaluating +#+cindex: @samp{RESULTS}, keyword + +A note about security: With code evaluation comes the risk of harm. +Org safeguards by prompting for user's permission before executing any +code in the source block. To customize this safeguard, or disable it, +see [[*Code Evaluation and Security Issues]]. + +*** How to evaluate source code +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org captures the results of the code block evaluation and inserts them +in the Org file, right after the code block. The insertion point is +after a newline and the =RESULTS= keyword. Org creates the =RESULTS= +keyword if one is not already there. + +By default, Org enables only Emacs Lisp code blocks for execution. +See [[*Languages]] to enable other languages. + +#+kindex: C-c C-c +#+kindex: C-c C-v e +#+findex: org-babel-execute-src-block +Org provides many ways to execute code blocks. {{{kbd(C-c C-c)}}} or +{{{kbd(C-c C-v e)}}} with the point on a code block[fn:142] calls the +~org-babel-execute-src-block~ function, which executes the code in the +block, collects the results, and inserts them in the buffer. + +#+cindex: @samp{CALL}, keyword +#+vindex: org-babel-inline-result-wrap +By calling a named code block[fn:143] from an Org mode buffer or +a table. Org can call the named code blocks from the current Org mode +buffer or from the "Library of Babel" (see [[*Library of Babel]]). + +The syntax for =CALL= keyword is: + +#+begin_example +,#+CALL: () +,#+CALL: []() +#+end_example + +The syntax for inline named code blocks is: + +#+begin_example +... call_() ... +... call_[]()[] ... +#+end_example + +When inline syntax is used, the result is wrapped based on the +variable ~org-babel-inline-result-wrap~, which by default is set to +~"=%s="~ to produce verbatim text suitable for markup. + +- == :: + + This is the name of the code block (see [[*Structure of Code Blocks]]) + to be evaluated in the current document. If the block is located in + another file, start == with the file name followed by + a colon. For example, in order to execute a block named =clear-data= + in =file.org=, you can write the following: + + : #+CALL: file.org:clear-data() + +- == :: + + Org passes arguments to the code block using standard function call + syntax. For example, a =#+CALL:= line that passes =4= to a code + block named =double=, which declares the header argument =:var n=2=, + would be written as: + + : #+CALL: double(n=4) + + #+texinfo: @noindent + Note how this function call syntax is different from the header + argument syntax. + +- == :: + + Org passes inside header arguments to the named code block using the + header argument syntax. Inside header arguments apply to code block + evaluation. For example, =[:results output]= collects results + printed to stdout during code execution of that block. Note how + this header argument syntax is different from the function call + syntax. + +- == :: + + End header arguments affect the results returned by the code block. + For example, =:results html= wraps the results in a =#+BEGIN_EXPORT + html= block before inserting the results in the Org buffer. + +*** Limit code block evaluation +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: @samp{eval}, header argument +#+cindex: control code block evaluation +The =eval= header argument can limit evaluation of specific code +blocks and =CALL= keyword. It is useful for protection against +evaluating untrusted code blocks by prompting for a confirmation. + +- =never= or =no= :: + + Org never evaluates the source code. + +- =query= :: + + Org prompts the user for permission to evaluate the source code. + +- =never-export= or =no-export= :: + + Org does not evaluate the source code when exporting, yet the user + can evaluate it interactively. + +- =query-export= :: + + Org prompts the user for permission to evaluate the source code + during export. + +If =eval= header argument is not set, then Org determines whether to +evaluate the source code from the ~org-confirm-babel-evaluate~ +variable (see [[*Code Evaluation and Security Issues]]). + +*** Cache results of evaluation +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: @samp{cache}, header argument +#+cindex: cache results of code evaluation +The =cache= header argument is for caching results of evaluating code +blocks. Caching results can avoid re-evaluating a code block that +have not changed since the previous run. To benefit from the cache +and avoid redundant evaluations, the source block must have a result +already present in the buffer, and neither the header +arguments---including the value of =var= references---nor the text of +the block itself has changed since the result was last computed. This +feature greatly helps avoid long-running calculations. For some edge +cases, however, the cached results may not be reliable. + +The caching feature is best for when code blocks are pure functions, +that is functions that return the same value for the same input +arguments (see [[*Environment of a Code Block]]), and that do not have +side effects, and do not rely on external variables other than the +input arguments. Functions that depend on a timer, file system +objects, and random number generators are clearly unsuitable for +caching. + +A note of warning: when =cache= is used in a session, caching may +cause unexpected results. + +When the caching mechanism tests for any source code changes, it does +not expand noweb style references (see [[*Noweb Reference Syntax]]). + +The =cache= header argument can have one of two values: =yes= or =no=. + +- =no= :: + + Default. No caching of results; code block evaluated every time. + +- =yes= :: + + Whether to run the code or return the cached results is determined + by comparing the SHA1 hash value of the combined code block and + arguments passed to it. This hash value is packed on the + =#+RESULTS:= line from previous evaluation. When hash values match, + Org does not evaluate the code block. When hash values mismatch, + Org evaluates the code block, inserts the results, recalculates the + hash value, and updates =#+RESULTS:= line. + +In this example, both functions are cached. But =caller= runs only if +the result from =random= has changed since the last run. + +#+begin_example +,#+NAME: random +,#+BEGIN_SRC R :cache yes + runif(1) +,#+END_SRC + +,#+RESULTS[a2a72cd647ad44515fab62e144796432793d68e1]: random +0.4659510825295 + +,#+NAME: caller +,#+BEGIN_SRC emacs-lisp :var x=random :cache yes + x +,#+END_SRC + +,#+RESULTS[bec9c8724e397d5df3b696502df3ed7892fc4f5f]: caller +0.254227238707244 +#+end_example + +** Results of Evaluation +:PROPERTIES: +:DESCRIPTION: Choosing a results type, post-processing... +:END: +#+cindex: code block, results of evaluation +#+cindex: source code, results of evaluation + +#+cindex: @samp{results}, header argument +How Org handles results of a code block execution depends on many +header arguments working together. The primary determinant, however, +is the =results= header argument. It accepts four classes of options. +Each code block can take only one option per class: + +- Collection :: + + For how the results should be collected from the code block; + +- Type :: + + For which type of result the code block will return; affects how Org + processes and inserts results in the Org buffer; + +- Format :: + + For the result; affects how Org processes results; + +- Handling :: + + For inserting results once they are properly formatted. + +*** Collection +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Collection options specify the results. Choose one of the options; +they are mutually exclusive. + +- =value= :: + + Default for most Babel libraries[fn:143]. Functional mode. Org + gets the value by wrapping the code in a function definition in the + language of the source block. That is why when using =:results + value=, code should execute like a function and return a value. For + languages like Python, an explicit ~return~ statement is mandatory + when using =:results value=. Result is the value returned by the + last statement in the code block. + + When evaluating the code block in a session (see [[*Environment of + a Code Block]]), Org passes the code to an interpreter running as an + interactive Emacs inferior process. Org gets the value from the + source code interpreter's last statement output. Org has to use + language-specific methods to obtain the value. For example, from + the variable ~_~ in Ruby, and the value of ~.Last.value~ in R. + +- =output= :: + + Scripting mode. Org passes the code to an external process running + the interpreter. Org returns the contents of the standard output + stream as text results. + + When using a session, Org passes the code to the interpreter running + as an interactive Emacs inferior process. Org concatenates any text + output from the interpreter and returns the collection as a result. + +*** Type +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Type tells what result types to expect from the execution of the code +block. Choose one of the options; they are mutually exclusive. The +default behavior is to automatically determine the result type. + +#+attr_texinfo: :sep , +- =table=, =vector= :: + + Interpret the results as an Org table. If the result is a single + value, create a table with one row and one column. Usage example: + =:results value table=. + + #+cindex: @samp{hlines}, header argument + In-between each table row or below the table headings, sometimes + results have horizontal lines, which are also known as "hlines". + The =hlines= argument with the default =no= value strips such lines + from the input table. For most code, this is desirable, or else + those =hline= symbols raise unbound variable errors. A =yes= + accepts such lines, as demonstrated in the following example. + + #+begin_example + ,#+NAME: many-cols + | a | b | c | + |---+---+---| + | d | e | f | + |---+---+---| + | g | h | i | + + ,#+NAME: no-hline + ,#+BEGIN_SRC python :var tab=many-cols :hlines no + return tab + ,#+END_SRC + + ,#+RESULTS: no-hline + | a | b | c | + | d | e | f | + | g | h | i | + + ,#+NAME: hlines + ,#+BEGIN_SRC python :var tab=many-cols :hlines yes + return tab + ,#+END_SRC + + ,#+RESULTS: hlines + | a | b | c | + |---+---+---| + | d | e | f | + |---+---+---| + | g | h | i | + #+end_example + +- =list= :: + + Interpret the results as an Org list. If the result is a single + value, create a list of one element. + +- =scalar=, =verbatim= :: + + Interpret literally and insert as quoted text. Do not create + a table. Usage example: =:results value verbatim=. + +- =file= :: + + Interpret as a filename. Save the results of execution of the code + block to that file, then insert a link to it. You can control both + the filename and the description associated to the link. + + #+cindex: @samp{file}, header argument + #+cindex: @samp{output-dir}, header argument + Org first tries to generate the filename from the value of the + =file= header argument and the directory specified using the + =output-dir= header arguments. If =output-dir= is not specified, + Org assumes it is the current directory. + + #+begin_example + ,#+BEGIN_SRC asymptote :results value file :file circle.pdf :output-dir img/ + size(2cm); + draw(unitcircle); + ,#+END_SRC + #+end_example + + #+cindex: @samp{file-ext}, header argument + If =file= header argument is missing, Org generates the base name of + the output file from the name of the code block, and its extension + from the =file-ext= header argument. In that case, both the name + and the extension are mandatory. + + #+begin_example + ,#+name: circle + ,#+BEGIN_SRC asymptote :results value file :file-ext pdf + size(2cm); + draw(unitcircle); + ,#+END_SRC + #+end_example + + #+cindex: @samp{file-desc}, header argument + The =file-desc= header argument defines the description (see [[*Link + Format]]) for the link. If =file-desc= is present but has no value, + the =file= value is used as the link description. When this + argument is not present, the description is omitted. If you want to + provide the =file-desc= argument but omit the description, you can + provide it with an empty vector (i.e., :file-desc []). + + #+cindex: @samp{sep}, header argument + By default, Org assumes that a table written to a file has + TAB-delimited output. You can choose a different separator with + the =sep= header argument. + + #+cindex: @samp{file-mode}, header argument + The =file-mode= header argument defines the file permissions. To + make it executable, use =:file-mode (identity #o755)=. + + #+begin_example + ,#+BEGIN_SRC shell :results file :file script.sh :file-mode (identity #o755) + echo "#!/bin/bash" + echo "echo Hello World" + ,#+END_SRC + #+end_example + +*** Format +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Format pertains to the type of the result returned by the code block. +Choose one of the options; they are mutually exclusive. The default +follows from the type specified above. + +#+attr_texinfo: :sep , +- =code= :: + + Result enclosed in a code block. Useful for parsing. Usage + example: =:results value code=. + +- =drawer= :: + + Result wrapped in a =RESULTS= drawer. Useful for containing =raw= + or =org= results for later scripting and automated processing. + Usage example: =:results value drawer=. + +- =html= :: + + Results enclosed in a =BEGIN_EXPORT html= block. Usage example: + =:results value html=. + +- =latex= :: + + Results enclosed in a =BEGIN_EXPORT latex= block. Usage example: + =:results value latex=. + +- =link=, =graphics= :: + + When used along with =file= type, the result is a link to the file + specified in =:file= header argument. However, unlike plain =file= + type, nothing is written to the disk. The block is used for its + side-effects only, as in the following example: + + #+begin_example + ,#+begin_src shell :results file link :file "download.tar.gz" + wget -c "https://example.com/download.tar.gz" + ,#+end_src + #+end_example + +- =org= :: + + Results enclosed in a =BEGIN_SRC org= block. For comma-escape, + either {{{kbd(TAB)}}} in the block, or export the file. Usage + example: =:results value org=. + +- =pp= :: + + Result converted to pretty-print source code. Enclosed in a code + block. Languages supported: Emacs Lisp, Python, and Ruby. Usage + example: =:results value pp=. + +- =raw= :: + + Interpreted as raw Org mode. Inserted directly into the buffer. + Aligned if it is a table. Usage example: =:results value raw=. + +#+cindex: @samp{wrap}, header argument +The =wrap= header argument unconditionally marks the results block by +appending strings to =#+BEGIN_= and =#+END_=. If no string is +specified, Org wraps the results in a =#+BEGIN_results= +... =#+END_results= block. It takes precedent over the =results= +value listed above. E.g., + +#+begin_example +,#+BEGIN_SRC emacs-lisp :results html :wrap EXPORT markdown +"Welcome back to the 90's" +,#+END_SRC + +,#+RESULTS: +,#+BEGIN_EXPORT markdown +Welcome back to the 90's +,#+END_EXPORT +#+end_example + +*** Handling +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Handling options after collecting the results. + +- =replace= :: + + Default. Insert results in the Org buffer. Remove previous + results. Usage example: =:results output replace=. + +- =silent= :: + + Do not insert results in the Org mode buffer, but echo them in the + minibuffer. Usage example: =:results output silent=. + +- =none= :: + + Do not process results at all. No inserting in the Org mode buffer + nor echo them in the minibuffer. Usage example: =:results none=. + +- =append= :: + + Append results to the Org buffer. Latest results are at the bottom. + Does not remove previous results. Usage example: =:results output + append=. + +- =prepend= :: + + Prepend results to the Org buffer. Latest results are at the top. + Does not remove previous results. Usage example: =:results output + prepend=. + +*** Post-processing +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: @samp{post}, header argument +#+cindex: @samp{*this*}, in @samp{post} header argument +The =post= header argument is for post-processing results from block +evaluation. When =post= has any value, Org binds the results to +~*this*~ variable for easy passing to =var= header argument +specifications (see [[*Environment of a Code Block]]). That makes results +available to other code blocks, or even for direct Emacs Lisp code +execution. + +The following two examples illustrate =post= header argument in +action. The first one shows how to attach an =ATTR_LATEX= keyword +using =post=. + +#+begin_example +,#+NAME: attr_wrap +,#+BEGIN_SRC sh :var data="" :var width="\\textwidth" :results output + echo "#+ATTR_LATEX: :width $width" + echo "$data" +,#+END_SRC + +,#+HEADER: :file /tmp/it.png +,#+BEGIN_SRC dot :post attr_wrap(width="5cm", data=*this*) :results drawer + digraph{ + a -> b; + b -> c; + c -> a; + } +,#+end_src + +,#+RESULTS: +:RESULTS: +,#+ATTR_LATEX :width 5cm +[[file:/tmp/it.png]] +:END: +#+end_example + +The second example shows use of =colnames= header argument in =post= +to pass data between code blocks. + +#+begin_example +,#+NAME: round-tbl +,#+BEGIN_SRC emacs-lisp :var tbl="" fmt="%.3f" + (mapcar (lambda (row) + (mapcar (lambda (cell) + (if (numberp cell) + (format fmt cell) + cell)) + row)) + tbl) +,#+end_src + +,#+BEGIN_SRC R :colnames yes :post round-tbl[:colnames yes](*this*) + set.seed(42) + data.frame(foo=rnorm(1)) +,#+END_SRC + +,#+RESULTS: +| foo | +|-------| +| 1.371 | +#+end_example + +** Exporting Code Blocks +:PROPERTIES: +:DESCRIPTION: Export contents and/or results. +:END: +#+cindex: code block, exporting +#+cindex: source code, exporting + +It is possible to export the /code/ of code blocks, the /results/ of +code block evaluation, /both/ the code and the results of code block +evaluation, or /none/. Org defaults to exporting /code/ for most +languages. For some languages, such as ditaa, Org defaults to +/results/. To export just the body of code blocks, see [[*Literal +Examples]]. To selectively export sub-trees of an Org document, see +[[*Exporting]]. + +#+cindex: @samp{exports}, header argument +The =exports= header argument is to specify if that part of the Org +file is exported to, say, HTML or LaTeX formats. + +- =code= :: + + The default. The body of code is included into the exported file. + Example: =:exports code=. + +- =results= :: + + The results of evaluation of the code is included in the exported + file. Example: =:exports results=. + +- =both= :: + + Both the code and results of evaluation are included in the exported + file. Example: =:exports both=. + +- =none= :: + + Neither the code nor the results of evaluation is included in the + exported file. Whether the code is evaluated at all depends on + other options. Example: =:exports none=. + +#+vindex: org-export-use-babel +To stop Org from evaluating code blocks to speed exports, use the +header argument =:eval never-export= (see [[*Evaluating Code Blocks]]). +To stop Org from evaluating code blocks for greater security, set the +~org-export-use-babel~ variable to ~nil~, but understand that header +arguments will have no effect. + +Turning off evaluation comes in handy when batch processing. For +example, markup languages for wikis, which have a high risk of +untrusted code. Stopping code block evaluation also stops evaluation +of all header arguments of the code block. This may not be desirable +in some circumstances. So during export, to allow evaluation of just +the header arguments but not any code evaluation in the source block, +set =:eval never-export= (see [[*Evaluating Code Blocks]]). + +Org never evaluates code blocks in commented sub-trees when exporting +(see [[*Comment Lines]]). On the other hand, Org does evaluate code +blocks in sub-trees excluded from export (see [[*Export Settings]]). + +** Extracting Source Code +:PROPERTIES: +:DESCRIPTION: Create pure source code files. +:END: +#+cindex: tangling +#+cindex: source code, extracting +#+cindex: code block, extracting source code + +Extracting source code from code blocks is a basic task in literate +programming. Org has features to make this easy. In literate +programming parlance, documents on creation are /woven/ with code and +documentation, and on export, the code is tangled for execution by +a computer. Org facilitates weaving and tangling for producing, +maintaining, sharing, and exporting literate programming documents. +Org provides extensive customization options for extracting source +code. + +When Org tangles code blocks, it expands, merges, and transforms them. +Then Org recomposes them into one or more separate files, as +configured through the options. During this tangling process, Org +expands variables in the source code, and resolves any noweb style +references (see [[*Noweb Reference Syntax]]). + +*** Header arguments +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+cindex: @samp{tangle}, header argument +The =tangle= header argument specifies if the code block is exported +to source file(s). + +- =yes= :: + + Export the code block to source file. The file name for the source + file is derived from the name of the Org file, and the file + extension is derived from the source code language identifier. + Example: =:tangle yes=. + +- =no= :: + + The default. Do not extract the code in a source code file. + Example: =:tangle no=. + +- {{{var(FILENAME)}}} :: + + Export the code block to source file whose file name is derived from + any string passed to the =tangle= header argument. Org derives the + file name as being relative to the directory of the Org file's + location. Example: =:tangle FILENAME=. + +#+cindex: @samp{mkdirp}, header argument +The =mkdirp= header argument creates parent directories for tangled +files if the directory does not exist. A =yes= value enables +directory creation whereas =no= inhibits it. + +#+cindex: @samp{comments}, header argument +The =comments= header argument controls inserting comments into +tangled files. These are above and beyond whatever comments may +already exist in the code block. + +- =no= :: + + The default. Do not insert any extra comments during tangling. + +- =link= :: + + Wrap the code block in comments. Include links pointing back to the + place in the Org file from where the code was tangled. + +- =yes= :: + + Kept for backward compatibility; same as =link=. + +- =org= :: + + Nearest headline text from Org file is inserted as comment. The + exact text that is inserted is picked from the leading context of + the source block. + +- =both= :: + + Includes both =link= and =org= options. + +- =noweb= :: + + Includes =link= option, expands noweb references (see [[*Noweb + Reference Syntax]]), and wraps them in link comments inside the body + of the code block. + +#+cindex: @samp{padline}, header argument +The =padline= header argument controls insertion of newlines to pad +source code in the tangled file. + +- =yes= :: + + Default. Insert a newline before and after each code block in the + tangled file. + +- =no= :: + + Do not insert newlines to pad the tangled code blocks. + +#+cindex: @samp{shebang}, header argument +The =shebang= header argument can turn results into executable script +files. By setting it to a string value---for example, =:shebang +"#!/bin/bash"=---Org inserts that string as the first line of the +tangled file that the code block is extracted to. Org then turns on +the tangled file's executable permission. + +#+cindex: @samp{tangle-mode}, header argument +The =tangle-mode= header argument specifies what permissions to set +for tangled files by ~set-file-modes~. For example, to make +a read-only tangled file, use =:tangle-mode (identity #o444)=. To +make it executable, use =:tangle-mode (identity #o755)=. It also +overrides executable permission granted by =shebang=. When multiple +source code blocks tangle to a single file with different and +conflicting =tangle-mode= header arguments, Org's behavior is +undefined. + +#+cindex: @samp{no-expand}, header argument +By default Org expands code blocks during tangling. The =no-expand= +header argument turns off such expansions. Note that one side-effect +of expansion by ~org-babel-expand-src-block~ also assigns values (see +[[*Environment of a Code Block]]) to variables. Expansions also replace +noweb references with their targets (see [[*Noweb Reference Syntax]]). +Some of these expansions may cause premature assignment, hence this +option. This option makes a difference only for tangling. It has no +effect when exporting since code blocks for execution have to be +expanded anyway. + +*** Functions +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- ~org-babel-tangle~ :: + + #+findex: org-babel-tangle + #+kindex: C-c C-v t + Tangle the current file. Bound to {{{kbd(C-c C-v t)}}}. + + With prefix argument only tangle the current code block. + +- ~org-babel-tangle-file~ :: + + #+findex: org-babel-tangle-file + #+kindex: C-c C-v f + Choose a file to tangle. Bound to {{{kbd(C-c C-v f)}}}. + +*** Tangle hooks +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- ~org-babel-post-tangle-hook~ :: + + #+vindex: org-babel-post-tangle-hook + This hook is run from within code files tangled by + ~org-babel-tangle~, making it suitable for post-processing, + compilation, and evaluation of code in the tangled files. + +*** Jumping between code and Org +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +#+findex: org-babel-tangle-jump-to-org +Debuggers normally link errors and messages back to the source code. +But for tangled files, we want to link back to the Org file, not to +the tangled source file. To make this extra jump, Org uses +~org-babel-tangle-jump-to-org~ function with two additional source +code block header arguments: + +1. Set =padline= to true---this is the default setting. +2. Set =comments= to =link=, which makes Org insert links to the Org + file. + +** Languages +:PROPERTIES: +:DESCRIPTION: List of supported code block languages. +:END: +#+cindex: babel, languages +#+cindex: source code, languages +#+cindex: code block, languages + +Code blocks in dozens of languages are supported. See Worg for +[[https://orgmode.org/worg/org-contrib/babel/languages/index.html][language specific documentation]]. + +#+vindex: org-babel-load-languages +By default, only Emacs Lisp is enabled for evaluation. To enable or +disable other languages, customize the ~org-babel-load-languages~ +variable either through the Emacs customization interface, or by +adding code to the init file as shown next. + +In this example, evaluation is disabled for Emacs Lisp, and enabled +for R. + +#+begin_src emacs-lisp +(org-babel-do-load-languages + 'org-babel-load-languages + '((emacs-lisp . nil) + (R . t))) +#+end_src + +Note that this is not the only way to enable a language. Org also +enables languages when loaded with ~require~ statement. For example, +the following enables execution of Clojure code blocks: + +#+begin_src emacs-lisp +(require 'ob-clojure) +#+end_src + +** Editing Source Code +:PROPERTIES: +:DESCRIPTION: Language major-mode editing. +:END: +#+cindex: code block, editing +#+cindex: source code, editing + +#+kindex: C-c ' +Use {{{kbd(C-c ')}}} to edit the current code block. It opens a new +major mode edit buffer containing the body of the source code block, +ready for any edits. Use {{{kbd(C-c ')}}} again to close the buffer +and return to the Org buffer. + +#+kindex: C-x C-s +#+vindex: org-edit-src-auto-save-idle-delay +#+cindex: auto-save, in code block editing +{{{kbd(C-x C-s)}}} saves the buffer and updates the contents of the +Org buffer. Set ~org-edit-src-auto-save-idle-delay~ to save the base +buffer after a certain idle delay time. Set +~org-edit-src-turn-on-auto-save~ to auto-save this buffer into +a separate file using Auto-save mode. + +While editing the source code in the major mode, the Org Src minor +mode remains active. It provides these customization variables as +described below. For even more variables, look in the customization +group ~org-edit-structure~. + +- ~org-src-lang-modes~ :: + + #+vindex: org-src-lang-modes + If an Emacs major-mode named ~-mode~ exists, where + {{{var()}}} is the language identifier from code block's + header line, then the edit buffer uses that major mode. Use this + variable to arbitrarily map language identifiers to major modes. + +- ~org-src-window-setup~ :: + + #+vindex: org-src-window-setup + For specifying Emacs window arrangement when the new edit buffer is + created. + +- ~org-src-preserve-indentation~ :: + + #+cindex: indentation, in code blocks + #+vindex: org-src-preserve-indentation + Default is ~nil~. Source code is indented. This indentation + applies during export or tangling, and depending on the context, may + alter leading spaces and tabs. When non-~nil~, source code is + aligned with the leftmost column. No lines are modified during + export or tangling, which is very useful for white-space sensitive + languages, such as Python. + +- ~org-src-ask-before-returning-to-edit-buffer~ :: + + #+vindex: org-src-ask-before-returning-to-edit-buffer + When ~nil~, Org returns to the edit buffer without further prompts. + The default prompts for a confirmation. + +#+vindex: org-src-fontify-natively +#+vindex: org-src-block-faces +Set ~org-src-fontify-natively~ to non-~nil~ to turn on native code +fontification in the /Org/ buffer. Fontification of code blocks can +give visual separation of text and code on the display page. To +further customize the appearance of ~org-block~ for specific +languages, customize ~org-src-block-faces~. The following example +shades the background of regular blocks, and colors source blocks only +for Python and Emacs Lisp languages. + +#+begin_src emacs-lisp +(require 'color) +(set-face-attribute 'org-block nil :background + (color-darken-name + (face-attribute 'default :background) 3)) + +(setq org-src-block-faces '(("emacs-lisp" (:background "#EEE2FF")) + ("python" (:background "#E5FFB8")))) +#+end_src + +** Noweb Reference Syntax +:PROPERTIES: +:DESCRIPTION: Literate programming in Org mode. +:END: +#+cindex: code block, noweb reference +#+cindex: syntax, noweb +#+cindex: source code, noweb reference + +#+cindex: @samp{noweb-ref}, header argument +Source code blocks can include references to other source code blocks, +using a noweb[fn:144] style syntax: + +: <> + +#+texinfo: @noindent +where {{{var(CODE-BLOCK-ID)}}} refers to either the =NAME= of a single +source code block, or a collection of one or more source code blocks +sharing the same =noweb-ref= header argument (see [[*Using Header +Arguments]]). Org can replace such references with the source code of +the block or blocks being referenced, or, in the case of a single +source code block named with =NAME=, with the results of an evaluation +of that block. + +#+cindex: @samp{noweb}, header argument +The =noweb= header argument controls expansion of noweb syntax +references. Expansions occur when source code blocks are evaluated, +tangled, or exported. + +- =no= :: + + Default. No expansion of noweb syntax references in the body of the + code when evaluating, tangling, or exporting. + +- =yes= :: + + Expansion of noweb syntax references in the body of the code block + when evaluating, tangling, or exporting. + +- =tangle= :: + + Expansion of noweb syntax references in the body of the code block + when tangling. No expansion when evaluating or exporting. + +- =no-export= :: + + Expansion of noweb syntax references in the body of the code block + when evaluating or tangling. No expansion when exporting. + +- =strip-export= :: + + Expansion of noweb syntax references in the body of the code block + when expanding prior to evaluating or tangling. Removes noweb + syntax references when exporting. + +- =eval= :: + + Expansion of noweb syntax references in the body of the code block + only before evaluating. + +In the most simple case, the contents of a single source block is +inserted within other blocks. Thus, in following example, + +#+begin_example +,#+NAME: initialization +,#+BEGIN_SRC emacs-lisp + (setq sentence "Never a foot too far, even.") +,#+END_SRC + +,#+BEGIN_SRC emacs-lisp :noweb yes + <> + (reverse sentence) +,#+END_SRC +#+end_example + +#+texinfo: @noindent +the second code block is expanded as + +#+begin_example +,#+BEGIN_SRC emacs-lisp :noweb yes + (setq sentence "Never a foot too far, even.") + (reverse sentence) +,#+END_SRC +#+end_example + +You may also include the contents of multiple blocks sharing a common +=noweb-ref= header argument, which can be set at the file, sub-tree, +or code block level. In the example Org file shown next, the body of +the source code in each block is extracted for concatenation to a pure +code file when tangled. + +#+begin_example +,#+BEGIN_SRC sh :tangle yes :noweb yes :shebang #!/bin/sh + <> +,#+END_SRC +,* the mount point of the fullest disk + :PROPERTIES: + :header-args: :noweb-ref fullest-disk + :END: + +,** query all mounted disks +,#+BEGIN_SRC sh + df \ +,#+END_SRC + +,** strip the header row +,#+BEGIN_SRC sh + |sed '1d' \ +,#+END_SRC + +,** output mount point of fullest disk +,#+BEGIN_SRC sh + |awk '{if (u < +$5) {u = +$5; m = $6}} END {print m}' +,#+END_SRC +#+end_example + +#+cindex: @samp{noweb-sep}, header argument +By default a newline separates each noweb reference concatenation. To +use a different separator, edit the =noweb-sep= header argument. + +Alternatively, Org can include the results of evaluation of a single +code block rather than its body. Evaluation occurs when parentheses, +possibly including arguments, are appended to the code block name, as +shown below. + +: <> + +Note that in this case, a code block name set by =NAME= keyword is +required; the reference set by =noweb-ref= will not work when +evaluation is desired. + +Here is an example that demonstrates how the exported content changes +when noweb style references are used with parentheses versus without. +Given: + +#+begin_example +,#+NAME: some-code +,#+BEGIN_SRC python :var num=0 :results output :exports none + print(num*10) +,#+END_SRC +#+end_example + +#+texinfo: @noindent +this code block: + +#+begin_example +,#+BEGIN_SRC text :noweb yes + <> +,#+END_SRC +#+end_example + +#+texinfo: @noindent +expands to: + +: print(num*10) + +Below, a similar noweb style reference is used, but with parentheses, +while setting a variable =num= to 10: + +#+begin_example +,#+BEGIN_SRC text :noweb yes + <> +,#+END_SRC +#+end_example + +#+texinfo: @noindent +Note that the expansion now contains the results of the code block +=some-code=, not the code block itself: + +: 100 + +Noweb insertions honor prefix characters that appear before the noweb +syntax reference. This behavior is illustrated in the following +example. Because the =<>= noweb reference appears behind the +SQL comment syntax, each line of the expanded noweb reference is +commented. With: + +#+begin_example +,#+NAME: example +,#+BEGIN_SRC text + this is the + multi-line body of example +,#+END_SRC +#+end_example + +#+texinfo: @noindent +this code block: + +#+begin_example +,#+BEGIN_SRC sql :noweb yes + ---<> +,#+END_SRC +#+end_example + +#+texinfo: @noindent +expands to: + +#+begin_example +,#+BEGIN_SRC sql :noweb yes + ---this is the + ---multi-line body of example +,#+END_SRC +#+end_example + +Since this change does not affect noweb replacement text without +newlines in them, inline noweb references are acceptable. + +This feature can also be used for management of indentation in +exported code snippets. With: + +#+begin_example +,#+NAME: if-true +,#+BEGIN_SRC python :exports none + print('do things when true') +,#+end_src + +,#+name: if-false +,#+begin_src python :exports none + print('do things when false') +,#+end_src +#+end_example + +#+texinfo: @noindent +this code block: + +#+begin_example +,#+begin_src python :noweb yes :results output + if true: + <> + else: + <> +,#+end_src +#+end_example + +#+texinfo: @noindent +expands to: + +#+begin_example +if true: + print('do things when true') +else: + print('do things when false') +#+end_example + +When in doubt about the outcome of a source code block expansion, you +can preview the results with the following command: + +- {{{kbd(C-c C-v v)}}} or {{{kbd(C-c C-v C-v)}}} (~org-babel-expand-src-block~) :: + + #+findex: org-babel-expand-src-block + #+kindex: C-c C-v v + #+kindex: C-c C-v C-v + Expand the current source code block according to its header + arguments and pop open the results in a preview buffer. + +** Library of Babel +:PROPERTIES: +:DESCRIPTION: Use and contribute to a library of useful code blocks. +:END: +#+cindex: babel, library of +#+cindex: source code, library +#+cindex: code block, library + +The "Library of Babel" is a collection of code blocks. Like +a function library, these code blocks can be called from other Org +files. A collection of useful code blocks is available on [[https://orgmode.org/worg/library-of-babel.html][Worg]]. For +remote code block evaluation syntax, see [[*Evaluating Code Blocks]]. + +#+kindex: C-c C-v i +#+findex: org-babel-lob-ingest +For any user to add code to the library, first save the code in +regular code blocks of an Org file, and then load the Org file with +~org-babel-lob-ingest~, which is bound to {{{kbd(C-c C-v i)}}}. + +** Key bindings and Useful Functions +:PROPERTIES: +:DESCRIPTION: Work quickly with code blocks. +:END: +#+cindex: code block, key bindings + +Many common Org mode key sequences are re-bound depending on +the context. + +Active key bindings in code blocks: + +#+kindex: C-c C-c +#+findex: org-babel-execute-src-block +#+kindex: C-c C-o +#+findex: org-babel-open-src-block-result +#+kindex: M-UP +#+findex: org-babel-load-in-session +#+kindex: M-DOWN +#+findex: org-babel-pop-to-session +#+attr_texinfo: :columns 0.2 0.55 +| Key binding | Function | +|--------------------+-----------------------------------| +| {{{kbd(C-c C-c)}}} | ~org-babel-execute-src-block~ | +| {{{kbd(C-c C-o)}}} | ~org-babel-open-src-block-result~ | +| {{{kbd(M-UP)}}} | ~org-babel-load-in-session~ | +| {{{kbd(M-DOWN)}}} | ~org-babel-pop-to-session~ | + +Active key bindings in Org mode buffer: + +#+kindex: C-c C-v p +#+kindex: C-c C-v C-p +#+kindex: C-c C-v n +#+kindex: C-c C-v C-n +#+kindex: C-c C-v e +#+kindex: C-c C-v C-e +#+kindex: C-c C-v o +#+kindex: C-c C-v C-o +#+kindex: C-c C-v v +#+kindex: C-c C-v C-v +#+kindex: C-c C-v u +#+kindex: C-c C-v C-u +#+kindex: C-c C-v g +#+kindex: C-c C-v C-g +#+kindex: C-c C-v r +#+kindex: C-c C-v C-r +#+kindex: C-c C-v b +#+kindex: C-c C-v C-b +#+kindex: C-c C-v s +#+kindex: C-c C-v C-s +#+kindex: C-c C-v d +#+kindex: C-c C-v C-d +#+kindex: C-c C-v t +#+kindex: C-c C-v C-t +#+kindex: C-c C-v f +#+kindex: C-c C-v C-f +#+kindex: C-c C-v c +#+kindex: C-c C-v C-c +#+kindex: C-c C-v j +#+kindex: C-c C-v C-j +#+kindex: C-c C-v l +#+kindex: C-c C-v C-l +#+kindex: C-c C-v i +#+kindex: C-c C-v C-i +#+kindex: C-c C-v I +#+kindex: C-c C-v C-I +#+kindex: C-c C-v z +#+kindex: C-c C-v C-z +#+kindex: C-c C-v a +#+kindex: C-c C-v C-a +#+kindex: C-c C-v h +#+kindex: C-c C-v C-h +#+kindex: C-c C-v x +#+kindex: C-c C-v C-x +#+findex: org-babel-previous-src-block +#+findex: org-babel-next-src-block +#+findex: org-babel-execute-maybe +#+findex: org-babel-open-src-block-result +#+findex: org-babel-expand-src-block +#+findex: org-babel-goto-src-block-head +#+findex: org-babel-goto-named-src-block +#+findex: org-babel-goto-named-result +#+findex: org-babel-execute-buffer +#+findex: org-babel-execute-subtree +#+findex: org-babel-demarcate-block +#+findex: org-babel-tangle +#+findex: org-babel-tangle-file +#+findex: org-babel-check-src-block +#+findex: org-babel-insert-header-arg +#+findex: org-babel-load-in-session +#+findex: org-babel-lob-ingest +#+findex: org-babel-view-src-block-info +#+findex: org-babel-switch-to-session-with-code +#+findex: org-babel-sha1-hash +#+findex: org-babel-describe-bindings +#+findex: org-babel-do-key-sequence-in-edit-buffer +#+attr_texinfo: :columns 0.45 0.55 +| Key binding | Function | +|------------------------------------------------+--------------------------------------------| +| {{{kbd(C-c C-v p)}}} or {{{kbd(C-c C-v C-p)}}} | ~org-babel-previous-src-block~ | +| {{{kbd(C-c C-v n)}}} or {{{kbd(C-c C-v C-n)}}} | ~org-babel-next-src-block~ | +| {{{kbd(C-c C-v e)}}} or {{{kbd(C-c C-v C-e)}}} | ~org-babel-execute-maybe~ | +| {{{kbd(C-c C-v o)}}} or {{{kbd(C-c C-v C-o)}}} | ~org-babel-open-src-block-result~ | +| {{{kbd(C-c C-v v)}}} or {{{kbd(C-c C-v C-v)}}} | ~org-babel-expand-src-block~ | +| {{{kbd(C-c C-v u)}}} or {{{kbd(C-c C-v C-u)}}} | ~org-babel-goto-src-block-head~ | +| {{{kbd(C-c C-v g)}}} or {{{kbd(C-c C-v C-g)}}} | ~org-babel-goto-named-src-block~ | +| {{{kbd(C-c C-v r)}}} or {{{kbd(C-c C-v C-r)}}} | ~org-babel-goto-named-result~ | +| {{{kbd(C-c C-v b)}}} or {{{kbd(C-c C-v C-b)}}} | ~org-babel-execute-buffer~ | +| {{{kbd(C-c C-v s)}}} or {{{kbd(C-c C-v C-s)}}} | ~org-babel-execute-subtree~ | +| {{{kbd(C-c C-v d)}}} or {{{kbd(C-c C-v C-d)}}} | ~org-babel-demarcate-block~ | +| {{{kbd(C-c C-v t)}}} or {{{kbd(C-c C-v C-t)}}} | ~org-babel-tangle~ | +| {{{kbd(C-c C-v f)}}} or {{{kbd(C-c C-v C-f)}}} | ~org-babel-tangle-file~ | +| {{{kbd(C-c C-v c)}}} or {{{kbd(C-c C-v C-c)}}} | ~org-babel-check-src-block~ | +| {{{kbd(C-c C-v j)}}} or {{{kbd(C-c C-v C-j)}}} | ~org-babel-insert-header-arg~ | +| {{{kbd(C-c C-v l)}}} or {{{kbd(C-c C-v C-l)}}} | ~org-babel-load-in-session~ | +| {{{kbd(C-c C-v i)}}} or {{{kbd(C-c C-v C-i)}}} | ~org-babel-lob-ingest~ | +| {{{kbd(C-c C-v I)}}} or {{{kbd(C-c C-v C-I)}}} | ~org-babel-view-src-block-info~ | +| {{{kbd(C-c C-v z)}}} or {{{kbd(C-c C-v C-z)}}} | ~org-babel-switch-to-session-with-code~ | +| {{{kbd(C-c C-v a)}}} or {{{kbd(C-c C-v C-a)}}} | ~org-babel-sha1-hash~ | +| {{{kbd(C-c C-v h)}}} or {{{kbd(C-c C-v C-h)}}} | ~org-babel-describe-bindings~ | +| {{{kbd(C-c C-v x)}}} or {{{kbd(C-c C-v C-x)}}} | ~org-babel-do-key-sequence-in-edit-buffer~ | + +** Batch Execution +:PROPERTIES: +:DESCRIPTION: Call functions from the command line. +:END: +#+cindex: code block, batch execution +#+cindex: source code, batch execution + +Org mode features, including working with source code facilities can +be invoked from the command line. This enables building shell scripts +for batch processing, running automated system tasks, and expanding +Org mode's usefulness. + +The sample script shows batch processing of multiple files using +~org-babel-tangle~. + +#+begin_example +#!/bin/sh +# Tangle files with Org mode +# +emacs -Q --batch --eval " + (progn + (require 'ob-tangle) + (dolist (file command-line-args-left) + (with-current-buffer (find-file-noselect file) + (org-babel-tangle)))) + " "$@" +#+end_example + +* Miscellaneous +:PROPERTIES: +:DESCRIPTION: All the rest which did not fit elsewhere. +:END: + +** Completion +:PROPERTIES: +:DESCRIPTION: @kbd{M-@key{TAB}} guesses completions. +:END: +#+cindex: completion, of @TeX{} symbols +#+cindex: completion, of TODO keywords +#+cindex: completion, of dictionary words +#+cindex: completion, of option keywords +#+cindex: completion, of tags +#+cindex: completion, of property keys +#+cindex: completion, of link abbreviations +#+cindex: @TeX{} symbol completion +#+cindex: TODO keywords completion +#+cindex: dictionary word completion +#+cindex: option keyword completion +#+cindex: tag completion +#+cindex: link abbreviations, completion of + +Org has in-buffer completions. Unlike minibuffer completions, which +are useful for quick command interactions, Org's in-buffer completions +are more suitable for content creation in Org documents. Type one or +more letters and invoke the hot key to complete the text in-place. +Depending on the context and the keys, Org offers different types of +completions. No minibuffer is involved. Such mode-specific hot keys +have become an integral part of Emacs and Org provides several +shortcuts. + +- {{{kbd(M-TAB)}}} :: + #+kindex: M-TAB + + Complete word at point. + + - At the beginning of an empty headline, complete TODO keywords. + + - After =\=, complete TeX symbols supported by the exporter. + + - After =:= in a headline, complete tags. Org deduces the list of + tags from the =TAGS= in-buffer option (see [[*Setting Tags]]), the + variable ~org-tag-alist~, or from all tags used in the current + buffer. + + - After =:= and not in a headline, complete property keys. The list + of keys is constructed dynamically from all keys used in the + current buffer. + + - After =[[=, complete link abbreviations (see [[*Link Abbreviations]]). + + - After =[[*=, complete headlines in the current buffer so that they + can be used in search links like: =[[*find this headline]]= + + - After =#+=, complete the special keywords like =TYP_TODO= or + file-specific =OPTIONS=. After option keyword is complete, + pressing {{{kbd(M-TAB)}}} again inserts example settings for this + keyword. + + - After =STARTUP= keyword, complete startup items. + + - When point is anywhere else, complete dictionary words using + Ispell. + +** Structure Templates +:PROPERTIES: +:DESCRIPTION: Quick insertion of structural elements. +:END: +#+cindex: template insertion +#+cindex: insertion, of templates + +With just a few keystrokes, it is possible to insert empty structural +blocks, such as =#+BEGIN_SRC= ... =#+END_SRC=, or to wrap existing +text in such a block. + +- {{{kbd(C-c C-\,)}}} (~org-insert-structure-template~) :: + + #+findex: org-insert-structure-template + #+kindex: C-c C-, + Prompt for a type of block structure, and insert the block at point. + If the region is active, it is wrapped in the block. First prompts + the user for keys, which are used to look up a structure type from + the variable below. If the key is {{{kbd(TAB)}}}, {{{kbd(RET)}}}, + or {{{kbd(SPC)}}}, the user is prompted to enter a block type. + +#+vindex: org-structure-template-alist +Available structure types are defined in +~org-structure-template-alist~, see the docstring for adding or +changing values. + +#+cindex: Tempo +#+cindex: template expansion +#+cindex: insertion, of templates +#+vindex: org-tempo-keywords-alist +Org Tempo expands snippets to structures defined in +~org-structure-template-alist~ and ~org-tempo-keywords-alist~. For +example, {{{kbd(< s TAB)}}} creates a code block. Enable it by +customizing ~org-modules~ or add =(require 'org-tempo)= to your Emacs +init file[fn:145]. + +#+attr_texinfo: :columns 0.1 0.9 +| {{{kbd(a)}}} | =#+BEGIN_EXPORT ascii= ... =#+END_EXPORT= | +| {{{kbd(c)}}} | =#+BEGIN_CENTER= ... =#+END_CENTER= | +| {{{kbd(C)}}} | =#+BEGIN_COMMENT= ... =#+END_COMMENT= | +| {{{kbd(e)}}} | =#+BEGIN_EXAMPLE= ... =#+END_EXAMPLE= | +| {{{kbd(E)}}} | =#+BEGIN_EXPORT= ... =#+END_EXPORT= | +| {{{kbd(h)}}} | =#+BEGIN_EXPORT html= ... =#+END_EXPORT= | +| {{{kbd(l)}}} | =#+BEGIN_EXPORT latex= ... =#+END_EXPORT= | +| {{{kbd(q)}}} | =#+BEGIN_QUOTE= ... =#+END_QUOTE= | +| {{{kbd(s)}}} | =#+BEGIN_SRC= ... =#+END_SRC= | +| {{{kbd(v)}}} | =#+BEGIN_VERSE= ... =#+END_VERSE= | + +** Speed Keys +:PROPERTIES: +:DESCRIPTION: Electric commands at the beginning of a headline. +:END: +#+cindex: speed keys + +Single keystrokes can execute custom commands in an Org file when +point is on a headline. Without the extra burden of a meta or +modifier key, Speed Keys can speed navigation or execute custom +commands. Besides faster navigation, Speed Keys may come in handy on +small mobile devices that do not have full keyboards. Speed Keys may +also work on TTY devices known for their problems when entering Emacs +key chords. + +#+vindex: org-use-speed-commands +By default, Org has Speed Keys disabled. To activate Speed Keys, set +the variable ~org-use-speed-commands~ to a non-~nil~ value. To +trigger a Speed Key, point must be at the beginning of an Org +headline, before any of the stars. + +#+vindex: org-speed-commands +#+findex: org-speed-command-help +Org comes with a pre-defined list of Speed Keys. To add or modify +Speed Keys, customize the option ~org-speed-commands~. For more +details, see the variable's docstring. With Speed Keys activated, +{{{kbd(M-x org-speed-command-help)}}}, or {{{kbd(?)}}} when point is at the +beginning of an Org headline, shows currently active Speed Keys, +including the user-defined ones. + +** A Cleaner Outline View +:PROPERTIES: +:DESCRIPTION: Getting rid of leading stars in the outline. +:ALT_TITLE: Clean View +:END: +#+cindex: hiding leading stars +#+cindex: dynamic indentation +#+cindex: odd-levels-only outlines +#+cindex: clean outline view + +Org's outline with stars and no indents can look cluttered for short +documents. For /book-like/ long documents, the effect is not as +noticeable. Org provides an alternate stars and indentation scheme, +as shown on the right in the following table. It displays only one +star and indents text to line up with the heading: + +#+begin_example +,* Top level headline | * Top level headline +,** Second level | * Second level +,*** Third level | * Third level +some text | some text +,*** Third level | * Third level +more text | more text +,* Another top level headline | * Another top level headline +#+end_example + +Org can achieve this in two ways, (1) by just displaying the buffer in +this way without changing it, or (2) by actually indenting every line +in the desired amount with hard spaces and hiding leading stars. + +*** Org Indent Mode + +#+cindex: Indent mode +#+findex: org-indent-mode +To display the buffer in the indented view, activate Org Indent minor +mode, using {{{kbd(M-x org-indent-mode)}}}. Text lines that are not +headlines are prefixed with virtual spaces to vertically align with +the headline text[fn:146]. + +#+vindex: org-indent-indentation-per-level +To make more horizontal space, the headlines are shifted by two +characters. Configure ~org-indent-indentation-per-level~ variable for +a different number. + +#+vindex: org-indent-mode-turns-on-hiding-stars +#+vindex: org-indent-mode-turns-off-org-adapt-indentation +By default, Org Indent mode turns off ~org-adapt-indentation~ and does +hide leading stars by locally setting ~org-hide-leading-stars~ to ~t~: +only one star on each headline is visible, the rest are masked with +the same font color as the background. If you want to customize this +default behavior, see ~org-indent-mode-turns-on-hiding-stars~ and +~org-indent-mode-turns-off-org-adapt-indentation~. + +#+vindex: org-startup-indented +To globally turn on Org Indent mode for all files, customize the +variable ~org-startup-indented~. To control it for individual files, +use =STARTUP= keyword as follows: + +: #+STARTUP: indent +: #+STARTUP: noindent + +*** Hard indentation + +It is possible to use hard spaces to achieve the indentation instead, +if the bare ASCII file should have the indented look also outside +Emacs[fn:147]. With Org's support, you have to indent all lines to +line up with the outline headers. You would use these +settings[fn:148]: + +#+begin_src emacs-lisp +(setq org-adapt-indentation t + org-hide-leading-stars t + org-odd-levels-only t) +#+end_src + +- /Indentation of text below headlines/ (~org-adapt-indentation~) :: + + #+vindex: org-adapt-indentation + The first setting modifies paragraph filling, line wrapping, and + structure editing commands to preserving or adapting the indentation + as appropriate. + +- /Hiding leading stars/ (~org-hide-leading-stars~) :: + + #+vindex: org-hide-leading-stars + #+vindex: org-hide, face + The second setting makes leading stars invisible by applying the + face ~org-hide~ to them. For per-file preference, use these file + =STARTUP= options: + + #+begin_example + ,#+STARTUP: hidestars + ,#+STARTUP: showstars + #+end_example + +- /Odd levels/ (~org-odd-levels-only~) :: + + #+vindex: org-odd-levels-only + The third setting makes Org use only odd levels, 1, 3, 5, ..., in + the outline to create more indentation. On a per-file level, + control this with: + + #+begin_example + ,#+STARTUP: odd + ,#+STARTUP: oddeven + #+end_example + + To convert a file between single and double stars layouts, use + {{{kbd(M-x org-convert-to-odd-levels)}}} and {{{kbd(M-x + org-convert-to-oddeven-levels)}}}. + +** Execute commands in the active region +:PROPERTIES: +:DESCRIPTION: Execute commands on multiple items in Org or agenda view. +:END: + +#+vindex: org-loop-over-headlines-in-active-region +When in an Org buffer and the region is active, some commands will +apply to all the subtrees in the active region. For example, hitting +{{{kbd(C-c C-s)}}} when multiple headlines are within the active region will +successively prompt you for a new schedule date and time. To disable +this, set the option ~org-loop-over-headlines-in-active-region~ to +non-~t~, activate the region and run the command normally. + +#+vindex: org-agenda-loop-over-headlines-in-active-region +~org-agenda-loop-over-headlines-in-active-region~ is the equivalent +option of the agenda buffer, where you can also use [[*Bulk remote editing selected entries][bulk editing of +selected entries]]. + +Not all commands can loop in the active region and what subtrees or +headlines are considered can be refined: see the docstrings of these +options for more details. + +** Dynamic Headline Numbering +:PROPERTIES: +:DESCRIPTION: Display and update outline numbering. +:END: + +#+cindex: Org Num mode +#+cindex: number headlines +The Org Num minor mode, toggled with {{{kbd(M-x org-num-mode)}}}, +displays outline numbering on top of headlines. It also updates it +automatically upon changes to the structure of the document. + +#+vindex: org-num-max-level +#+vindex: org-num-skip-tags +#+vindex: org-num-skip-commented +#+vindex: org-num-skip-unnumbered +By default, all headlines are numbered. You can limit numbering to +specific headlines according to their level, tags, =COMMENT= keyword, +or =UNNUMBERED= property. Set ~org-num-max-level~, +~org-num-skip-tags~, ~org-num-skip-commented~, +~org-num-skip-unnumbered~, or ~org-num-skip-footnotes~ accordingly. + +#+vindex: org-num-skip-footnotes +If ~org-num-skip-footnotes~ is non-~nil~, footnotes sections (see +[[*Creating Footnotes]]) are not numbered either. + +#+vindex: org-num-face +#+vindex: org-num-format-function +You can control how the numbering is displayed by setting +~org-num-face~ and ~org-num-format-function~. + +#+vindex: org-startup-numerated +You can also turn this mode globally for all Org files by setting the +option ~org-startup-numerated~ to =t=, or locally on a file by using +=#+startup: num=. + +** The Very Busy {{{kbd(C-c C-c)}}} Key +:PROPERTIES: +:DESCRIPTION: When in doubt, press @kbd{C-c C-c}. +:END: +#+kindex: C-c C-c +#+cindex: @kbd{C-c C-c}, overview + +The {{{kbd(C-c C-c)}}} key in Org serves many purposes depending on +the context. It is probably the most over-worked, multi-purpose key +combination in Org. Its uses are well documented throughout this +manual, but here is a consolidated list for easy reference. + +- If column view (see [[*Column View]]) is on, exit column view. + +- If any highlights shown in the buffer from the creation of a sparse + tree, or from clock display, remove such highlights. + +- If point is in one of the special =KEYWORD= lines, scan the buffer + for these lines and update the information. Also reset the Org file + cache used to temporary store the contents of URLs used as values + for keywords like =SETUPFILE=. + +- If point is inside a table, realign the table. + +- If point is on a =TBLFM= keyword, re-apply the formulas to the + entire table. + +- If the current buffer is a capture buffer, close the note and file + it. With a prefix argument, also jump to the target location after + saving the note. + +- If point is on a =<<>>=, update radio targets and + corresponding links in this buffer. + +- If point is on a property line or at the start or end of a property + drawer, offer property commands. + +- If point is at a footnote reference, go to the corresponding + definition, and /vice versa/. + +- If point is on a statistics cookie, update it. + +- If point is in a plain list item with a checkbox, toggle the status + of the checkbox. + +- If point is on a numbered item in a plain list, renumber the ordered + list. + +- If point is on the =#+BEGIN= line of a dynamic block, the block is + updated. + +- If point is at a timestamp, fix the day name in the timestamp. + +** Summary of In-Buffer Settings +:PROPERTIES: +:DESCRIPTION: Overview of keywords. +:ALT_TITLE: In-buffer Settings +:END: +#+cindex: in-buffer settings +#+cindex: special keywords + +In-buffer settings start with =#+=, followed by a keyword, a colon, +and then a word for each setting. Org accepts multiple settings on +the same line. Org also accepts multiple lines for a keyword. This +manual describes these settings throughout. A summary follows here. + +#+cindex: refresh set-up +{{{kbd(C-c C-c)}}} activates any changes to the in-buffer settings. +Closing and reopening the Org file in Emacs also activates the +changes. + +#+attr_texinfo: :sep , +- =#+ARCHIVE: %s_done::= :: + + #+cindex: @samp{ARCHIVE}, keyword + #+vindex: org-archive-location + Sets the archive location of the agenda file. The corresponding + variable is ~org-archive-location~. + +- =#+CATEGORY= :: + + #+cindex: @samp{CATEGORY}, keyword + Sets the category of the agenda file, which applies to the entire + document. + +- =#+COLUMNS: %25ITEM ...= :: + + #+cindex: @samp{COLUMNS}, property + Set the default format for columns view. This format applies when + columns view is invoked in locations where no =COLUMNS= property + applies. + +- =#+CONSTANTS: name1=value1 ...= :: + + #+cindex: @samp{CONSTANTS}, keyword + #+vindex: org-table-formula-constants + #+vindex: org-table-formula + Set file-local values for constants that table formulas can use. + This line sets the local variable + ~org-table-formula-constants-local~. The global version of this + variable is ~org-table-formula-constants~. + +- =#+FILETAGS: :tag1:tag2:tag3:= :: + + #+cindex: @samp{FILETAGS}, keyword + Set tags that all entries in the file inherit from, including the + top-level entries. + +- =#+LINK: linkword replace= :: + + #+cindex: @samp{LINK}, keyword + #+vindex: org-link-abbrev-alist + Each line specifies one abbreviation for one link. Use multiple + =LINK= keywords for more, see [[*Link Abbreviations]]. The + corresponding variable is ~org-link-abbrev-alist~. + +- =#+PRIORITIES: highest lowest default= :: + + #+cindex: @samp{PRIORITIES}, keyword + #+vindex: org-priority-highest + #+vindex: org-priority-lowest + #+vindex: org-priority-default + This line sets the limits and the default for the priorities. All + three must be either letters A--Z or numbers 0--9. The highest + priority must have a lower ASCII number than the lowest priority. + +- =#+PROPERTY: Property_Name Value= :: + + #+cindex: @samp{PROPERTY}, keyword + This line sets a default inheritance value for entries in the + current buffer, most useful for specifying the allowed values of + a property. + +- =#+SETUPFILE: file= :: + + #+cindex: @samp{SETUPFILE}, keyword + The setup file or a URL pointing to such file is for additional + in-buffer settings. Org loads this file and parses it for any + settings in it only when Org opens the main file. If URL is + specified, the contents are downloaded and stored in a temporary + file cache. {{{kbd(C-c C-c)}}} on the settings line parses and + loads the file, and also resets the temporary file cache. Org also + parses and loads the document during normal exporting process. Org + parses the contents of this document as if it was included in the + buffer. It can be another Org file. To visit the file---not + a URL---use {{{kbd(C-c ')}}} while point is on the line with the + file name. + +- =#+STARTUP:= :: + + #+cindex: @samp{STARTUP}, keyword + Startup options Org uses when first visiting a file. + + #+vindex: org-startup-folded + The first set of options deals with the initial visibility of the + outline tree. The corresponding variable for global default + settings is ~org-startup-folded~ with a default value of + ~showeverything~. + + | =overview= | Top-level headlines only. | + | =content= | All headlines. | + | =showall= | No folding on any entry. | + | =show2levels= | Headline levels 1-2. | + | =show3levels= | Headline levels 1-3. | + | =show4levels= | Headline levels 1-4. | + | =show5levels= | Headline levels 1-5. | + | =showeverything= | Show even drawer contents. | + + #+vindex: org-startup-indented + Dynamic virtual indentation is controlled by the variable + ~org-startup-indented~[fn:149]. + + | =indent= | Start with Org Indent mode turned on. | + | =noindent= | Start with Org Indent mode turned off. | + + #+vindex: org-startup-numerated + Dynamic virtual numeration of headlines is controlled by the variable + ~org-startup-numerated~. + + | =num= | Start with Org num mode turned on. | + | =nonum= | Start with Org num mode turned off. | + + #+vindex: org-startup-align-all-tables + Aligns tables consistently upon visiting a file. The + corresponding variable is ~org-startup-align-all-tables~ with + ~nil~ as default value. + + | =align= | Align all tables. | + | =noalign= | Do not align tables on startup. | + + #+vindex: org-startup-shrink-all-tables + Shrink table columns with a width cookie. The corresponding + variable is ~org-startup-shrink-all-tables~ with ~nil~ as + default value. + + #+vindex: org-startup-with-inline-images + When visiting a file, inline images can be automatically + displayed. The corresponding variable is + ~org-startup-with-inline-images~, with a default value ~nil~ to + avoid delays when visiting a file. + + | =inlineimages= | Show inline images. | + | =noinlineimages= | Do not show inline images on startup. | + + #+vindex: org-log-done + #+vindex: org-log-note-clock-out + #+vindex: org-log-repeat + Logging the closing and reopening of TODO items and clock + intervals can be configured using these options (see variables + ~org-log-done~, ~org-log-note-clock-out~, and ~org-log-repeat~). + + | =logdone= | Record a timestamp when an item is marked as done. | + | =lognotedone= | Record timestamp and a note when DONE. | + | =nologdone= | Do not record when items are marked as done. | + | =logrepeat= | Record a time when reinstating a repeating item. | + | =lognoterepeat= | Record a note when reinstating a repeating item. | + | =nologrepeat= | Do not record when reinstating repeating item. | + | =lognoteclock-out= | Record a note when clocking out. | + | =nolognoteclock-out= | Do not record a note when clocking out. | + | =logreschedule= | Record a timestamp when scheduling time changes. | + | =lognotereschedule= | Record a note when scheduling time changes. | + | =nologreschedule= | Do not record when a scheduling date changes. | + | =logredeadline= | Record a timestamp when deadline changes. | + | =lognoteredeadline= | Record a note when deadline changes. | + | =nologredeadline= | Do not record when a deadline date changes. | + | =logrefile= | Record a timestamp when refiling. | + | =lognoterefile= | Record a note when refiling. | + | =nologrefile= | Do not record when refiling. | + + #+vindex: org-hide-leading-stars + #+vindex: org-odd-levels-only + Here are the options for hiding leading stars in outline + headings, and for indenting outlines. The corresponding + variables are ~org-hide-leading-stars~ and + ~org-odd-levels-only~, both with a default setting ~nil~ + (meaning =showstars= and =oddeven=). + + | =hidestars= | Make all but one of the stars starting a headline invisible. | + | =showstars= | Show all stars starting a headline. | + | =indent= | Virtual indentation according to outline level. | + | =noindent= | No virtual indentation according to outline level. | + | =odd= | Allow only odd outline levels (1, 3, ...). | + | =oddeven= | Allow all outline levels. | + + #+vindex: org-put-time-stamp-overlays + #+vindex: org-time-stamp-overlay-formats + To turn on custom format overlays over timestamps (variables + ~org-put-time-stamp-overlays~ and + ~org-time-stamp-overlay-formats~), use: + + | =customtime= | Overlay custom time format. | + + #+vindex: constants-unit-system + The following options influence the table spreadsheet (variable + ~constants-unit-system~). + + | =constcgs= | =constants.el= should use the c-g-s unit system. | + | =constSI= | =constants.el= should use the SI unit system. | + + #+vindex: org-footnote-define-inline + #+vindex: org-footnote-auto-label + #+vindex: org-footnote-auto-adjust + To influence footnote settings, use the following keywords. The + corresponding variables are ~org-footnote-define-inline~, + ~org-footnote-auto-label~, and ~org-footnote-auto-adjust~. + + | =fninline= | Define footnotes inline. | + | =fnnoinline= | Define footnotes in separate section. | + | =fnlocal= | Define footnotes near first reference, but not inline. | + | =fnprompt= | Prompt for footnote labels. | + | =fnauto= | Create =[fn:1]=-like labels automatically (default). | + | =fnconfirm= | Offer automatic label for editing or confirmation. | + | =fnadjust= | Automatically renumber and sort footnotes. | + | =nofnadjust= | Do not renumber and sort automatically. | + + #+vindex: org-hide-block-startup + To hide blocks on startup, use these keywords. The + corresponding variable is ~org-hide-block-startup~. + + | =hideblocks= | Hide all begin/end blocks on startup. | + | =nohideblocks= | Do not hide blocks on startup. | + + #+vindex: org-pretty-entities + The display of entities as UTF-8 characters is governed by the + variable ~org-pretty-entities~ and the keywords + + | =entitiespretty= | Show entities as UTF-8 characters where possible. | + | =entitiesplain= | Leave entities plain. | + +- =#+TAGS: TAG1(c1) TAG2(c2)= :: + + #+cindex: @samp{TAGS}, keyword + #+vindex: org-tag-alist + These lines (several such lines are allowed) specify the valid tags + in this file, and (potentially) the corresponding /fast tag + selection/ keys. The corresponding variable is ~org-tag-alist~. + +- =#+TODO:=, =#+SEQ_TODO:=, =#+TYP_TODO:= :: + + #+cindex: @samp{SEQ_TODO}, keyword + #+cindex: @samp{TODO}, keyword + #+cindex: @samp{TYP_TODO}, keyword + #+vindex: org-todo-keywords + These lines set the TODO keywords and their interpretation in the + current file. The corresponding variable is ~org-todo-keywords~. + +** Regular Expressions +:PROPERTIES: +:DESCRIPTION: Elisp regular expressions. +:END: +#+cindex: regular expressions syntax +#+cindex: regular expressions, in searches + +Org, as an Emacs mode, makes use of Elisp regular expressions for +searching, matching and filtering. Elisp regular expressions have a +somewhat different syntax then some common standards. Most notably, +alternation is indicated using =\|= and matching groups are denoted by +=\(...\)=. For example the string =home\|work= matches either =home= +or =work=. + +For more information, see [[info:emacs::Regexps][Regular Expressions in Emacs]]. + +** Org Syntax +:PROPERTIES: +:DESCRIPTION: Formal description of Org's syntax. +:END: + +A reference document providing a formal description of Org's syntax is +available as [[https://orgmode.org/worg/dev/org-syntax.html][a draft on Worg]], written and maintained by Nicolas +Goaziou. It defines Org's core internal concepts such as "headlines", +"sections", "affiliated keywords", "(greater) elements" and "objects". +Each part of an Org document belongs to one of the previous +categories. + +To explore the abstract structure of an Org buffer, run this in +a buffer: + +: M-: (org-element-parse-buffer) + +#+texinfo: @noindent +It outputs a list containing the buffer's content represented as an +abstract structure. The export engine relies on the information +stored in this list. Most interactive commands---e.g., for structure +editing---also rely on the syntactic meaning of the surrounding +context. + +#+cindex: syntax checker +#+cindex: linter +#+findex: org-lint +You can probe the syntax of your documents with the command + +: M-x org-lint + +#+texinfo: @noindent +It runs a number of checks to find common mistakes. It then displays +their location in a dedicated buffer, along with a description and +a "trust level", since false-positive are possible. From there, you +can operate on the reports with the following keys: + +#+attr_texinfo: :columns 0.22 0.78 +| {{{kbd(C-j)}}}, {{{kbd(TAB)}}} | Display the offending line | +| {{{kbd(RET)}}} | Move point to the offending line | +| {{{kbd(g)}}} | Check the document again | +| {{{kbd(h)}}} | Hide all reports from the same checker | +| {{{kbd(i)}}} | Also remove them from all subsequent checks | +| {{{kbd(S)}}} | Sort reports by the column at point | + +** Context Dependent Documentation +:PROPERTIES: +:DESCRIPTION: Read documentation about current syntax. +:ALT_TITLE: Documentation Access +:END: +#+cindex: documentation +#+cindex: Info + +#+findex: org-info-find-node +#+kindex: C-c C-x I +{{{kbd(C-c C-x I)}}} in an Org file tries to open a suitable section +of the Org manual depending on the syntax at point. For example, +using it on a headline displays "Document Structure" section. + +{{{kbd(q)}}} closes the Info window. + +** Escape Character +:PROPERTIES: +:DESCRIPTION: Prevent Org from interpreting your writing. +:END: + +#+cindex: escape character +#+cindex: zero width space +You may sometimes want to write text that looks like Org syntax, but +should really read as plain text. Org may use a specific escape +character in some situations, i.e., a backslash in macros (see [[*Macro +Replacement]]) and links (see [[*Link Format]]), or a comma in source and +example blocks (see [[*Literal Examples]]). In the general case, however, +we suggest to use the zero width space. You can insert one with any +of the following: + +: C-x 8 zero width space +: C-x 8 200B + +For example, in order to write =[[1,2]]= as-is in your document, you +may write instead + +: [X[1,2]] + +where =X= denotes the zero width space character. + +** Code Evaluation and Security Issues +:PROPERTIES: +:DESCRIPTION: Org files evaluate in-line code. +:ALT_TITLE: Code Evaluation Security +:END: + +Unlike plain text, running code comes with risk. Each source code +block, in terms of risk, is equivalent to an executable file. Org +therefore puts a few confirmation prompts by default. This is to +alert the casual user from accidentally running untrusted code. + +For users who do not run code blocks or write code regularly, Org's +default settings should suffice. However, some users may want to +tweak the prompts for fewer interruptions. To weigh the risks of +automatic execution of code blocks, here are some details about code +evaluation. + +Org evaluates code in the following circumstances: + +- /Source code blocks/ :: + + Org evaluates source code blocks in an Org file during export. Org + also evaluates a source code block with the {{{kbd(C-c C-c)}}} key + chord. Users exporting or running code blocks must load files only + from trusted sources. Be wary of customizing variables that remove + or alter default security measures. + + #+attr_texinfo: :options org-confirm-babel-evaluate + #+begin_defopt + When ~t~, Org prompts the user for confirmation before executing + each code block. When ~nil~, Org executes code blocks without + prompting the user for confirmation. When this option is set to + a custom function, Org invokes the function with these two + arguments: the source code language and the body of the code block. + The custom function must return either a ~t~ or ~nil~, which + determines if the user is prompted. Each source code language can + be handled separately through this function argument. + #+end_defopt + + For example, here is how to execute ditaa code blocks without + prompting: + + #+begin_src emacs-lisp + (defun my-org-confirm-babel-evaluate (lang body) + (not (string= lang "ditaa"))) ;don't ask for ditaa + (setq org-confirm-babel-evaluate #'my-org-confirm-babel-evaluate) + #+end_src + +- /Following =shell= and =elisp= links/ :: + + Org has two link types that can directly evaluate code (see + [[*External Links]]). Because such code is not visible, these links + have a potential risk. Org therefore prompts the user when it + encounters such links. The customization variables are: + + #+attr_texinfo: :options org-link-shell-confirm-function + #+begin_defopt + Function that prompts the user before executing a shell link. + #+end_defopt + + #+attr_texinfo: :options org-link-elisp-confirm-function + #+begin_defopt + Function that prompts the user before executing an Emacs Lisp link. + #+end_defopt + +- /Formulas in tables/ :: + + Formulas in tables (see [[*The Spreadsheet]]) are code that is evaluated + either by the Calc interpreter, or by the Emacs Lisp interpreter. + +** Interaction with Other Packages +:PROPERTIES: +:DESCRIPTION: With other Emacs packages. +:ALT_TITLE: Interaction +:END: +#+cindex: packages, interaction with other + +Org's compatibility and the level of interaction with other Emacs +packages are documented here. + +*** Packages that Org cooperates with +:PROPERTIES: +:DESCRIPTION: Packages Org cooperates with. +:ALT_TITLE: Cooperation +:END: + +- =calc.el= by Dave Gillespie :: + #+cindex: @file{calc.el} + + Org uses the Calc package for implementing spreadsheet functionality + in its tables (see [[*The Spreadsheet]]). Org also uses Calc for + embedded calculations. See [[info:calc::Embedded Mode][GNU Emacs Calc Manual]]. + +- =constants.el= by Carsten Dominik :: + #+cindex: @file{constants.el} + #+vindex: org-table-formula-constants + + Org can use names for constants in formulas in tables. Org can also + use calculation suffixes for units, such as =M= for =Mega=. For + a standard collection of such constants, install the =constants= + package. Install version 2.0 of this package, available at + [[http://www.astro.uva.nl/~dominik/Tools]]. Org checks if the function + ~constants-get~ has been autoloaded. Installation instructions are + in the file =constants.el=. + +- =cdlatex.el= by Carsten Dominik :: + #+cindex: @file{cdlatex.el} + + Org mode can make use of the CDLaTeX package to efficiently enter + LaTeX fragments into Org files. See [[*Using CDLaTeX to enter math]]. + +- =imenu.el= by Ake Stenhoff and Lars Lindberg :: + #+cindex: @file{imenu.el} + + Imenu creates dynamic menus based on an index of items in a file. + Org mode supports Imenu menus. Enable it with a mode hook as + follows: + + #+begin_src emacs-lisp + (add-hook 'org-mode-hook + (lambda () (imenu-add-to-menubar "Imenu"))) + #+end_src + + #+vindex: org-imenu-depth + By default the index is two levels deep---you can modify the + depth using the option ~org-imenu-depth~. + +- =speedbar.el= by Eric\nbsp{}M.\nbsp{}Ludlam :: + #+cindex: @file{speedbar.el} + + Speedbar package creates a special Emacs frame for displaying files + and index items in files. Org mode supports Speedbar; users can + drill into Org files directly from the Speedbar. The {{{kbd(<)}}} + in the Speedbar frame tweaks the agenda commands to that file or to + a subtree. + +- =table.el= by Takaaki Ota :: + #+cindex: table editor, @file{table.el} + #+cindex: @file{table.el} + + Complex ASCII tables with automatic line wrapping, column- and + row-spanning, and alignment can be created using the Emacs table + package by Takaaki Ota. Org mode recognizes such tables and exports + them properly. {{{kbd(C-c ')}}} to edit these tables in a special + buffer, much like Org's code blocks. Because of interference with + other Org mode functionality, Takaaki Ota tables cannot be edited + directly in the Org buffer. + + - {{{kbd(C-c ')}}} (~org-edit-special~) :: + + #+kindex: C-c ' + #+findex: org-edit-special + Edit a =table.el= table. Works when point is in a =table.el= + table. + + - {{{kbd(C-c ~​)}}} (~org-table-create-with-table.el~) :: + + #+kindex: C-c ~ + #+findex: org-table-create-with-table.el + Insert a =table.el= table. If there is already a table at point, + this command converts it between the =table.el= format and the Org + mode format. See the documentation string of the command + ~org-convert-table~ for the restrictions under which this is + possible. + +*** Packages that conflict with Org mode +:PROPERTIES: +:DESCRIPTION: Packages that lead to conflicts. +:ALT_TITLE: Conflicts +:END: + +#+cindex: shift-selection +#+vindex: org-support-shift-select +In Emacs, shift-selection combines motions of point with shift key to +enlarge regions. Emacs sets this mode by default. This conflicts +with Org's use of {{{kbd(S-)}}} commands to change timestamps, +TODO keywords, priorities, and item bullet types, etc. Since +{{{kbd(S-)}}} commands outside of specific contexts do not do +anything, Org offers the variable ~org-support-shift-select~ for +customization. Org mode accommodates shift selection by (i) making it +available outside of the special contexts where special commands +apply, and (ii) extending an existing active region even if point +moves across a special context. + +- =cua.el= by Kim\nbsp{}F.\nbsp{}Storm :: + + #+cindex: @file{cua.el} + #+vindex: org-replace-disputed-keys + Org key bindings conflict with {{{kbd(S-)}}} keys used by + CUA mode. For Org to relinquish these bindings to CUA mode, + configure the variable ~org-replace-disputed-keys~. When set, Org + moves the following key bindings in Org files, and in the agenda + buffer---but not during date selection. + + #+attr_texinfo: :columns 0.4 0.4 + | {{{kbd(S-UP)}}} \rArr{} {{{kbd(M-p)}}} | {{{kbd(S-DOWN)}}} \rArr{} {{{kbd(M-n)}}} | + | {{{kbd(S-LEFT)}}} \rArr{} {{{kbd(M--)}}} | {{{kbd(S-RIGHT)}}} \rArr{} {{{kbd(M-+)}}} | + | {{{kbd(C-S-LEFT)}}} \rArr{} {{{kbd(M-S--)}}} | {{{kbd(C-S-RIGHT)}}} \rArr{} {{{kbd(M-S-+)}}} | + + #+vindex: org-disputed-keys + Yes, these are unfortunately more difficult to remember. If you + want to have other replacement keys, look at the variable + ~org-disputed-keys~. + +- =ecomplete.el= by Lars Magne Ingebrigtsen :: + + #+cindex: @file{ecomplete.el} + Ecomplete provides "electric" address completion in address header + lines in message buffers. Sadly Orgtbl mode cuts Ecomplete's power + supply: no completion happens when Orgtbl mode is enabled in message + buffers while entering text in address header lines. If one wants + to use ecomplete one should /not/ follow the advice to automagically + turn on Orgtbl mode in message buffers (see [[*The Orgtbl Minor Mode]]), + but instead---after filling in the message headers---turn on Orgtbl + mode manually when needed in the messages body. + +- =filladapt.el= by Kyle Jones :: + + #+cindex: @file{filladapt.el} + Org mode tries to do the right thing when filling paragraphs, list + items and other elements. Many users reported problems using both + =filladapt.el= and Org mode, so a safe thing to do is to disable + filladapt like this: + + #+begin_src emacs-lisp + (add-hook 'org-mode-hook 'turn-off-filladapt-mode) + #+end_src + +- =viper.el= by Michael Kifer :: + #+cindex: @file{viper.el} + #+kindex: C-c / + + Viper uses {{{kbd(C-c /)}}} and therefore makes this key not access + the corresponding Org mode command ~org-sparse-tree~. You need to + find another key for this command, or override the key in + ~viper-vi-global-user-map~ with + + #+begin_src emacs-lisp + (define-key viper-vi-global-user-map "C-c /" 'org-sparse-tree) + #+end_src + +- =windmove.el= by Hovav Shacham :: + #+cindex: @file{windmove.el} + + This package also uses the {{{kbd(S-)}}} keys, so everything + written in the paragraph above about CUA mode also applies here. If + you want to make the windmove function active in locations where Org + mode does not have special functionality on {{{kbd(S-)}}}, + add this to your configuration: + + #+begin_src emacs-lisp + ;; Make windmove work in Org mode: + (add-hook 'org-shiftup-final-hook 'windmove-up) + (add-hook 'org-shiftleft-final-hook 'windmove-left) + (add-hook 'org-shiftdown-final-hook 'windmove-down) + (add-hook 'org-shiftright-final-hook 'windmove-right) + #+end_src + +- =yasnippet.el= :: + + #+cindex: @file{yasnippet.el} + The way Org mode binds the {{{kbd(TAB)}}} key (binding to ~[tab]~ + instead of ~"\t"~) overrules YASnippet's access to this key. The + following code fixed this problem: + + #+begin_src emacs-lisp + (add-hook 'org-mode-hook + (lambda () + (setq-local yas/trigger-key [tab]) + (define-key yas/keymap [tab] 'yas/next-field-or-maybe-expand))) + #+end_src + + The latest version of YASnippet does not play well with Org mode. + If the above code does not fix the conflict, start by defining + the following function: + + #+begin_src emacs-lisp + (defun yas/org-very-safe-expand () + (let ((yas/fallback-behavior 'return-nil)) (yas/expand))) + #+end_src + + Then, tell Org mode to use that function: + + #+begin_src emacs-lisp + (add-hook 'org-mode-hook + (lambda () + (make-variable-buffer-local 'yas/trigger-key) + (setq yas/trigger-key [tab]) + (add-to-list 'org-tab-first-hook 'yas/org-very-safe-expand) + (define-key yas/keymap [tab] 'yas/next-field))) + #+end_src +** Using Org on a TTY +:PROPERTIES: +:DESCRIPTION: Using Org on a tty. +:ALT_TITLE: TTY Keys +:END: +#+cindex: tty key bindings + +Org provides alternative key bindings for TTY and modern mobile +devices that cannot perform movement commands on point and key +bindings with modifier keys. Some of these workarounds may be more +cumbersome than necessary. Users should look into customizing these +further based on their usage needs. For example, the normal +{{{kbd(S-)}}} for editing timestamp might be better with +{{{kbd(C-c .)}}} chord. + +#+attr_texinfo: :columns 0.2 0.28 0.15 0.21 +| Default | Alternative 1 | Speed key | Alternative 2 | +|----------------------+--------------------------+--------------+----------------------| +| {{{kbd(S-TAB)}}} | {{{kbd(C-u TAB)}}} | {{{kbd(C)}}} | | +| {{{kbd(M-LEFT)}}} | {{{kbd(C-c C-x l)}}} | {{{kbd(l)}}} | {{{kbd(Esc LEFT)}}} | +| {{{kbd(M-S-LEFT)}}} | {{{kbd(C-c C-x L)}}} | {{{kbd(L)}}} | | +| {{{kbd(M-RIGHT)}}} | {{{kbd(C-c C-x r)}}} | {{{kbd(r)}}} | {{{kbd(Esc RIGHT)}}} | +| {{{kbd(M-S-RIGHT)}}} | {{{kbd(C-c C-x R)}}} | {{{kbd(R)}}} | | +| {{{kbd(M-UP)}}} | {{{kbd(C-c C-x u)}}} | | {{{kbd(Esc UP)}}} | +| {{{kbd(M-S-UP)}}} | {{{kbd(C-c C-x U)}}} | {{{kbd(U)}}} | | +| {{{kbd(M-DOWN)}}} | {{{kbd(C-c C-x d)}}} | | {{{kbd(Esc DOWN)}}} | +| {{{kbd(M-S-DOWN)}}} | {{{kbd(C-c C-x D)}}} | {{{kbd(D)}}} | | +| {{{kbd(S-RET)}}} | {{{kbd(C-c C-x c)}}} | | | +| {{{kbd(M-RET)}}} | {{{kbd(C-c C-x m)}}} | | {{{kbd(Esc RET)}}} | +| {{{kbd(M-S-RET)}}} | {{{kbd(C-c C-x M)}}} | | | +| {{{kbd(S-LEFT)}}} | {{{kbd(C-c LEFT)}}} | | | +| {{{kbd(S-RIGHT)}}} | {{{kbd(C-c RIGHT)}}} | | | +| {{{kbd(S-UP)}}} | {{{kbd(C-c UP)}}} | | | +| {{{kbd(S-DOWN)}}} | {{{kbd(C-c DOWN)}}} | | | +| {{{kbd(C-S-LEFT)}}} | {{{kbd(C-c C-x LEFT)}}} | | | +| {{{kbd(C-S-RIGHT)}}} | {{{kbd(C-c C-x RIGHT)}}} | | | + +** Protocols for External Access +:PROPERTIES: +:DESCRIPTION: External access to Emacs and Org. +:ALT_TITLE: Protocols +:END: +#+cindex: protocols, for external access + +Org protocol is a tool to trigger custom actions in Emacs from +external applications. Any application that supports calling external +programs with an URL as argument may be used with this functionality. +For example, you can configure bookmarks in your web browser to send a +link to the current page to Org and create a note from it using +capture (see [[*Capture]]). You can also create a bookmark that tells +Emacs to open the local source file of a remote website you are +browsing. + +#+cindex: Org protocol, set-up +#+cindex: Installing Org protocol +In order to use Org protocol from an application, you need to register +=org-protocol://= as a valid scheme-handler. External calls are +passed to Emacs through the =emacsclient= command, so you also need to +ensure an Emacs server is running. More precisely, when the +application calls + +: emacsclient "org-protocol://PROTOCOL?key1=val1&key2=val2" + +#+texinfo: @noindent +Emacs calls the handler associated to {{{var(PROTOCOL)}}} with +argument =(:key1 val1 :key2 val2)=. + +#+cindex: protocol, new protocol +#+cindex: defining new protocols +Org protocol comes with three predefined protocols, detailed in the +following sections. Configure ~org-protocol-protocol-alist~ to define +your own. + +*** The ~store-link~ protocol +:PROPERTIES: +:DESCRIPTION: Store a link, push URL to kill-ring. +:END: +#+cindex: store-link protocol +#+cindex: protocol, store-link + +Using the ~store-link~ handler, you can copy links, to that they can +be inserted using {{{kbd(M-x org-insert-link)}}} or yanking. More +precisely, the command + +: emacsclient "org-protocol://store-link?url=URL&title=TITLE" + +#+texinfo: @noindent +stores the following link: + +: [[URL][TITLE]] + +In addition, {{{var(URL)}}} is pushed on the kill-ring for yanking. +You need to encode {{{var(URL)}}} and {{{var(TITLE)}}} if they contain +slashes, and probably quote those for the shell. + +To use this feature from a browser, add a bookmark with an arbitrary +name, e.g., =Org: store-link= and enter this as /Location/: + +#+begin_example +javascript:location.href='org-protocol://store-link?' + + new URLSearchParams({url:location.href, title:document.title}); +#+end_example + +Title is an optional parameter. Another expression was recommended earlier: + +#+begin_example +javascript:location.href='org-protocol://store-link?url='+ + encodeURIComponent(location.href); +#+end_example + +The latter form is compatible with older Org versions from 9.0 to 9.4. + +*** The ~capture~ protocol +:PROPERTIES: +:DESCRIPTION: Fill a buffer with external information. +:END: +#+cindex: capture protocol +#+cindex: protocol, capture + +Activating the "capture" handler pops up a =Capture= buffer in Emacs, +using acapture template. + +: emacsclient "org-protocol://capture?template=X&url=URL&title=TITLE&body=BODY" + +To use this feature, add a bookmark with an arbitrary name, e.g., +=Org: capture=, and enter this as =Location=: + +#+begin_example +javascript:location.href='org-protocol://capture?' + + new URLSearchParams({ + template: 'x', url: window.location.href, + title: document.title, body: window.getSelection()}); +#+end_example + +You might have seen another expression: + +#+begin_example +javascript:location.href='org-protocol://capture?template=x'+ + '&url='+encodeURIComponent(window.location.href)+ + '&title='+encodeURIComponent(document.title)+ + '&body='+encodeURIComponent(window.getSelection()); +#+end_example + +It is a bit more cluttered than the former one, but it is compatible +with previous Org versions 9.0-9.4. In these versions encoding of +space as "+" character was not supported by URI decoder. + +#+vindex: org-protocol-default-template-key +The capture template to be used can be specified in the bookmark (like +=X= above). If unspecified, the template key is set in the variable +~org-protocol-default-template-key~. The following template +placeholders are available: + +#+begin_example +%:link The URL +%:description The webpage title +%:annotation Equivalent to [[%:link][%:description]] +%i The selected text +#+end_example + +*** The ~open-source~ protocol +:PROPERTIES: +:DESCRIPTION: Edit published contents. +:END: +#+cindex: open-source protocol +#+cindex: protocol, open-source + +The ~open-source~ handler is designed to help with editing local +sources when reading a document. To that effect, you can use +a bookmark with the following location: + +#+begin_example +javascript:location.href='org-protocol://open-source?&url='+ + encodeURIComponent(location.href) +#+end_example + +#+vindex: org-protocol-project-alist +The variable ~org-protocol-project-alist~ maps URLs to local file +names, by stripping URL parameters from the end and replacing the +~:base-url~ with ~:working-directory~ and ~:online-suffix~ with +~:working-suffix~. For example, assuming you own a local copy of +=https://orgmode.org/worg/= contents at =/home/user/worg=, you can set +~org-protocol-project-alist~ to the following + +#+begin_src emacs-lisp +(setq org-protocol-project-alist + '(("Worg" + :base-url "https://orgmode.org/worg/" + :working-directory "/home/user/worg/" + :online-suffix ".html" + :working-suffix ".org"))) +#+end_src + +#+texinfo: @noindent +If you are now browsing +=https://orgmode.org/worg/org-contrib/org-protocol.html= and find +a typo or have an idea about how to enhance the documentation, simply +click the bookmark and start editing. + +#+cindex: rewritten URL in open-source protocol +#+cindex: protocol, open-source rewritten URL +However, such mapping may not always yield the desired results. +Suppose you maintain an online store located at =https://example.com/=. +The local sources reside in =/home/user/example/=. It is common +practice to serve all products in such a store through one file and +rewrite URLs that do not match an existing file on the server. That +way, a request to =https://example.com/print/posters.html= might be +rewritten on the server to something like +=https://example.com/shop/products.php/posters.html.php=. The +~open-source~ handler probably cannot find a file named +=/home/user/example/print/posters.html.php= and fails. + +Such an entry in ~org-protocol-project-alist~ may hold an additional +property ~:rewrites~. This property is a list of cons cells, each of +which maps a regular expression to a path relative to the +~:working-directory~. + +Now map the URL to the path =/home/user/example/products.php= by +adding ~:rewrites~ rules like this: + +#+begin_src emacs-lisp +(setq org-protocol-project-alist + '(("example.com" + :base-url "https://example.com/" + :working-directory "/home/user/example/" + :online-suffix ".php" + :working-suffix ".php" + :rewrites (("example.com/print/" . "products.php") + ("example.com/$" . "index.php"))))) +#+end_src + +#+texinfo: @noindent +Since =example.com/$= is used as a regular expression, it maps +=http://example.com/=, =https://example.com=, +=http://www.example.com/= and similar to +=/home/user/example/index.php=. + +The ~:rewrites~ rules are searched as a last resort if and only if no +existing file name is matched. + +#+cindex: protocol, open-source, set-up mapping +#+cindex: mappings in open-source protocol +#+findex: org-protocol-create +#+findex: org-protocol-create-for-org +Two functions can help you filling ~org-protocol-project-alist~ with +valid contents: ~org-protocol-create~ and +~org-protocol-create-for-org~. The latter is of use if you're editing +an Org file that is part of a publishing project. +** Org Crypt +:PROPERTIES: +:DESCRIPTION: Encrypting Org files. +:END: + +Org Crypt encrypts the text of an entry, but not the headline, or +properties. Behind the scene, it uses the [[info:epa][Emacs EasyPG Library]] to +encrypt and decrypt files, and EasyPG needs a correct [[info:gnupg][GnuPG]] setup. + +#+vindex: org-crypt-tag-matcher +Any text below a headline that has a =crypt= tag is automatically +encrypted when the file is saved. To use a different tag, customize +the ~org-crypt-tag-matcher~ setting. + +Here is a suggestion for Org Crypt settings in Emacs init file: + +#+begin_src emacs-lisp +(require 'org-crypt) +(org-crypt-use-before-save-magic) +(setq org-tags-exclude-from-inheritance '("crypt")) + +(setq org-crypt-key nil) +;; GPG key to use for encryption +;; Either the Key ID or set to nil to use symmetric encryption. + +(setq auto-save-default nil) +;; Auto-saving does not cooperate with org-crypt.el: so you need to +;; turn it off if you plan to use org-crypt.el quite often. Otherwise, +;; you'll get an (annoying) message each time you start Org. + +;; To turn it off only locally, you can insert this: +;; +;; # -*- buffer-auto-save-file-name: nil; -*- +#+end_src + +It's possible to use different keys for different headings by +specifying the respective key as property =CRYPTKEY=, e.g.: + +#+begin_example +,* Totally secret :crypt: + :PROPERTIES: + :CRYPTKEY: 0x0123456789012345678901234567890123456789 + :END: +#+end_example + +Excluding the =crypt= tag from inheritance prevents already encrypted +text from being encrypted again. + +** Org Mobile +:PROPERTIES: +:DESCRIPTION: Viewing and capture on a mobile device. +:END: +#+cindex: smartphone + +Org Mobile is a protocol for synchronizing Org files between Emacs and +other applications, e.g., on mobile devices. It enables offline-views +and capture support for an Org mode system that is rooted on a "real" +computer. The external application can also record changes to +existing entries. + +This appendix describes Org's support for agenda view formats +compatible with Org Mobile. It also describes synchronizing changes, +such as to notes, between the mobile application and the computer. + +To change tags and TODO states in the mobile application, first +customize the variables ~org-todo-keywords~, ~org-tag-alist~ and +~org-tag-persistent-alist~. These should cover all the important tags +and TODO keywords, even if Org files use only some of them. Though +the mobile application is expected to support in-buffer settings, it +is required to understand TODO states /sets/ (see [[*Setting up keywords +for individual files]]) and /mutually exclusive/ tags (see [[*Setting +Tags]]) only for those set in these variables. + +*** Setting up the staging area +:PROPERTIES: +:DESCRIPTION: For the mobile device. +:END: + +#+vindex: org-mobile-directory +The mobile application needs access to a file directory on +a server[fn:150] to interact with Emacs. Pass its location through +the ~org-mobile-directory~ variable. If you can mount that directory +locally just set the variable to point to that directory: + +#+begin_src emacs-lisp +(setq org-mobile-directory "~/orgmobile/") +#+end_src + +Alternatively, by using TRAMP (see [[info:tramp][TRAMP User Manual]]), +~org-mobile-directory~ may point to a remote directory accessible +through, for example, SSH, SCP, or DAVS: + +#+begin_src emacs-lisp +(setq org-mobile-directory "/davs:user@remote.host:/org/webdav/") +#+end_src + +#+vindex: org-mobile-encryption +With a public server, consider encrypting the files. Org also +requires OpenSSL installed on the local computer. To turn on +encryption, set the same password in the mobile application and in +Emacs. Set the password in the variable +~org-mobile-use-encryption~[fn:151]. Note that even after the mobile +application encrypts the file contents, the file name remains visible +on the file systems of the local computer, the server, and the mobile +device. + +*** Pushing to the mobile application +:PROPERTIES: +:DESCRIPTION: Uploading Org files and agendas. +:END: + +#+findex: org-mobile-push +#+vindex: org-mobile-files +The command ~org-mobile-push~ copies files listed in +~org-mobile-files~ into the staging area. Files include agenda files +(as listed in ~org-agenda-files~). Customize ~org-mobile-files~ to +add other files. File names are staged with paths relative to +~org-directory~, so all files should be inside this directory[fn:152]. + +Push creates a special Org file =agendas.org= with custom agenda views +defined by the user[fn:153]. + +Finally, Org writes the file =index.org=, containing links to other +files. The mobile application reads this file first from the server +to determine what other files to download for agendas. For faster +downloads, it is expected to only read files whose checksums[fn:154] +have changed. + +*** Pulling from the mobile application +:PROPERTIES: +:DESCRIPTION: Integrating captured and flagged items. +:END: + +#+findex: org-mobile-pull +The command ~org-mobile-pull~ synchronizes changes with the server. +More specifically, it first pulls the Org files for viewing. It then +appends captured entries and pointers to flagged or changed entries to +the file =mobileorg.org= on the server. Org ultimately integrates its +data in an inbox file format, through the following steps: + +1. + #+vindex: org-mobile-inbox-for-pull + Org moves all entries found in =mobileorg.org=[fn:155] and appends + them to the file pointed to by the variable + ~org-mobile-inbox-for-pull~. It should reside neither in the + staging area nor on the server. Each captured entry and each + editing event is a top-level entry in the inbox file. + +2. + #+cindex: @samp{FLAGGED}, tag + After moving the entries, Org processes changes to the shared + files. Some of them are applied directly and without user + interaction. Examples include changes to tags, TODO state, + headline and body text. Entries requiring further action are + tagged as =FLAGGED=. Org marks entries with problems with an error + message in the inbox. They have to be resolved manually. + +3. Org generates an agenda view for flagged entries for user + intervention to clean up. For notes stored in flagged entries, Org + displays them in the echo area when point is on the corresponding + agenda item. + + - {{{kbd(?)}}} :: + + Pressing {{{kbd(?)}}} displays the entire flagged note in another + window. Org also pushes it to the kill ring. To store flagged + note as a normal note, use {{{kbd(? z C-y C-c C-c)}}}. Pressing + {{{kbd(?)}}} twice does these things: first it removes the + =FLAGGED= tag; second, it removes the flagged note from the + property drawer; third, it signals that manual editing of the + flagged entry is now finished. + +#+kindex: ? @r{(Agenda dispatcher)} +From the agenda dispatcher, {{{kbd(?)}}} returns to the view to finish +processing flagged entries. Note that these entries may not be the +most recent since the mobile application searches files that were last +pulled. To get an updated agenda view with changes since the last +pull, pull again. + +* Hacking +:PROPERTIES: +:DESCRIPTION: How to hack your way around. +:APPENDIX: t +:END: +#+cindex: hacking + +This appendix describes some ways a user can extend the functionality +of Org. + +** Hooks +:PROPERTIES: +:DESCRIPTION: How to reach into Org's internals. +:END: +#+cindex: hooks + +Org has a large number of hook variables for adding functionality. +This appendix illustrates using a few. A complete list of hooks with +documentation is maintained by the Worg project at +https://orgmode.org/worg/doc.html#hooks. + +** Add-on Packages +:PROPERTIES: +:DESCRIPTION: Available extensions. +:END: +#+cindex: add-on packages + +Various authors wrote a large number of add-on packages for Org. Some +of these packages used to be part of the =org-mode= repository but are +now hosted in a separate =org-contrib= repository +[[https://git.sr.ht/~bzg/org-contrib][here]]. A Worg page with more +information is at: https://orgmode.org/worg/org-contrib/. + +** Adding Hyperlink Types +:PROPERTIES: +:DESCRIPTION: New custom link types. +:END: +#+cindex: hyperlinks, adding new types + +Org has many built-in hyperlink types (see [[*Hyperlinks]]), and an +interface for adding new link types. The following example shows the +process of adding Org links to Unix man pages, which look like this + +: [[man:printf][The printf manual]] + +#+texinfo: @noindent +The following =ol-man.el= file implements it + +#+begin_src emacs-lisp +;;; ol-man.el - Support for links to man pages in Org mode +(require 'ol) + +(org-link-set-parameters "man" + :follow #'org-man-open + :export #'org-man-export + :store #'org-man-store-link) + +(defcustom org-man-command 'man + "The Emacs command to be used to display a man page." + :group 'org-link + :type '(choice (const man) (const woman))) + +(defun org-man-open (path _) + "Visit the manpage on PATH. +PATH should be a topic that can be thrown at the man command." + (funcall org-man-command path)) + +(defun org-man-store-link () + "Store a link to a man page." + (when (memq major-mode '(Man-mode woman-mode)) + ;; This is a man page, we do make this link. + (let* ((page (org-man-get-page-name)) + (link (concat "man:" page)) + (description (format "Man page for %s" page))) + (org-link-store-props + :type "man" + :link link + :description description)))) + +(defun org-man-get-page-name () + "Extract the page name from the buffer name." + ;; This works for both `Man-mode' and `woman-mode'. + (if (string-match " \\(\\S-+\\)\\*" (buffer-name)) + (match-string 1 (buffer-name)) + (error "Cannot create link to this man page"))) + +(defun org-man-export (link description format _) + "Export a man page link from Org files." + (let ((path (format "http://man.he.net/?topic=%s§ion=all" link)) + (desc (or description link))) + (pcase format + (`html (format "%s" path desc)) + (`latex (format "\\href{%s}{%s}" path desc)) + (`texinfo (format "@uref{%s,%s}" path desc)) + (`ascii (format "%s (%s)" desc path)) + (t path)))) + +(provide ol-man) +;;; ol-man.el ends here +#+end_src + +#+texinfo: @noindent +To activate links to man pages in Org, enter this in the Emacs init +file: + +#+begin_src emacs-lisp +(require 'ol-man) +#+end_src + +#+texinfo: @noindent +A review of =ol-man.el=: + +1. First, =(require 'ol)= ensures that =ol.el= is loaded. + +2. + + #+findex: org-link-set-parameters + #+vindex: org-link-parameters + Then ~org-link-set-parameters~ defines a new link type with =man= + prefix and associates functions for following, exporting and + storing such links. See the variable ~org-link-parameters~ for + a complete list of possible associations. + +3. The rest of the file implements necessary variables and functions. + + For example, ~org-man-store-link~ is responsible for storing a link + when ~org-store-link~ (see [[*Handling Links]]) is called from a buffer + displaying a man page. It first checks if the major mode is + appropriate. If check fails, the function returns ~nil~, which + means it isn't responsible for creating a link to the current + buffer. Otherwise the function makes a link string by combining + the =man:= prefix with the man topic. It also provides a default + description. The function ~org-insert-link~ can insert it back + into an Org buffer later on. + +** Adding Export Back-ends +:PROPERTIES: +:DESCRIPTION: How to write new export back-ends. +:END: +#+cindex: Export, writing back-ends + +Org's export engine makes it easy for writing new back-ends. The +framework on which the engine was built makes it easy to derive new +back-ends from existing ones. + +#+findex: org-export-define-backend +#+findex: org-export-define-derived-backend +The two main entry points to the export engine are: +~org-export-define-backend~ and ~org-export-define-derived-backend~. +To grok these functions, see =ox-latex.el= for an example of defining +a new back-end from scratch, and =ox-beamer.el= for an example of +deriving from an existing engine. + +For creating a new back-end from scratch, first set its name as +a symbol in an alist consisting of elements and export functions. To +make the back-end visible to the export dispatcher, set ~:menu-entry~ +keyword. For export options specific to this back-end, set the +~:options-alist~. + +For creating a new back-end from an existing one, set +~:translate-alist~ to an alist of export functions. This alist +replaces the parent back-end functions. + +For complete documentation, see [[https://orgmode.org/worg/dev/org-export-reference.html][the Org Export Reference on Worg]]. + +** Tables in Arbitrary Syntax +:PROPERTIES: +:DESCRIPTION: Orgtbl for LaTeX and other programs. +:END: +#+cindex: tables, in other modes +#+cindex: lists, in other modes +#+cindex: Orgtbl mode + +Due to Org's success in handling tables with Orgtbl, a frequently +requested feature is the use of Org's table functions in other modes, +e.g., LaTeX. This would be hard to do in a general way without +complicated customization nightmares. Moreover, that would take Org +away from its simplicity roots that Orgtbl has proven. There is, +however, an alternate approach to accomplishing the same. + +This approach involves implementing a custom /translate/ function that +operates on a native Org /source table/ to produce a table in another +format. This strategy would keep the excellently working Orgtbl +simple and isolate complications, if any, confined to the translate +function. To add more alien table formats, we just add more translate +functions. Also the burden of developing custom translate functions +for new table formats is in the hands of those who know those formats +best. + +*** Radio tables +:PROPERTIES: +:DESCRIPTION: Sending and receiving radio tables. +:END: +#+cindex: radio tables + +Radio tables are target locations for translated tables that are not near +their source. Org finds the target location and inserts the translated +table. + +The key to finding the target location is the magic words =BEGIN/END +RECEIVE ORGTBL=. They have to appear as comments in the current mode. +If the mode is C, then: + +#+begin_example +/* BEGIN RECEIVE ORGTBL table_name */ +/* END RECEIVE ORGTBL table_name */ +#+end_example + +At the location of source, Org needs a special line to direct Orgtbl +to translate and to find the target for inserting the translated +table. For example: + +#+cindex: @samp{ORGTBL}, keyword +: #+ORGTBL: SEND table_name translation_function arguments ... + +#+texinfo: @noindent +=table_name= is the table's reference name, which is also used in the +receiver lines, and the =translation_function= is the Lisp function +that translates. This line, in addition, may also contain alternating +key and value arguments at the end. The translation function gets +these values as a property list. A few standard parameters are +already recognized and acted upon before the translation function is +called: + +- =:skip N= :: + + Skip the first N lines of the table. Hlines do count; include them + if they are to be skipped. + +- =:skipcols (n1 n2 ...)= :: + + List of columns to be skipped. First Org automatically discards + columns with calculation marks and then sends the table to the + translator function, which then skips columns as specified in + =skipcols=. + +To keep the source table intact in the buffer without being disturbed +when the source file is compiled or otherwise being worked on, use one +of these strategies: + +- Place the table in a block comment. For example, in C mode you + could wrap the table between =/*= and =*/= lines. + +- Put the table after an "end" statement. For example ~\bye~ in TeX + and ~\end{document}~ in LaTeX. + +- Comment and un-comment each line of the table during edits. The + {{{kbd(M-x orgtbl-toggle-comment)}}} command makes toggling easy. + +*** A LaTeX example of radio tables +:PROPERTIES: +:DESCRIPTION: Step by step, almost a tutorial. +:ALT_TITLE: A LaTeX example +:END: +#+cindex: @LaTeX{}, and Orgtbl mode + +To wrap a source table in LaTeX, use the =comment= environment +provided by =comment.sty=[fn:156]. To activate it, put +~\usepackage{comment}~ in the document header. Orgtbl mode inserts +a radio table skeleton[fn:157] with the command {{{kbd(M-x +orgtbl-insert-radio-table)}}}, which prompts for a table name. For +example, if =salesfigures= is the name, the template inserts: + +#+begin_example +% BEGIN RECEIVE ORGTBL salesfigures +% END RECEIVE ORGTBL salesfigures +\begin{comment} +,#+ORGTBL: SEND salesfigures orgtbl-to-latex +| | | +\end{comment} +#+end_example + +#+vindex: LaTeX-verbatim-environments +#+texinfo: @noindent +The line =#+ORGTBL: SEND= tells Orgtbl mode to use the function +~orgtbl-to-latex~ to convert the table to LaTeX format, then insert +the table at the target (receive) location named =salesfigures=. Now +the table is ready for data entry. It can even use spreadsheet +features[fn:158]: + +#+begin_example +% BEGIN RECEIVE ORGTBL salesfigures +% END RECEIVE ORGTBL salesfigures +\begin{comment} +,#+ORGTBL: SEND salesfigures orgtbl-to-latex +| Month | Days | Nr sold | per day | +|-------+------+---------+---------| +| Jan | 23 | 55 | 2.4 | +| Feb | 21 | 16 | 0.8 | +| March | 22 | 278 | 12.6 | +,#+TBLFM: $4=$3/$2;%.1f +% $ (optional extra dollar to keep Font Lock happy, see footnote) +\end{comment} +#+end_example + +After editing, {{{kbd(C-c C-c)}}} inserts the translated table at the +target location, between the two marker lines. + +For hand-made custom tables, note that the translator needs to skip +the first two lines of the source table. Also the command has to +/splice/ out the target table without the header and footer. + +#+begin_example +\begin{tabular}{lrrr} +Month & \multicolumn{1}{c}{Days} & Nr.\ sold & per day\\ +% BEGIN RECEIVE ORGTBL salesfigures +% END RECEIVE ORGTBL salesfigures +\end{tabular} +% +\begin{comment} +,#+ORGTBL: SEND salesfigures orgtbl-to-latex :splice t :skip 2 +| Month | Days | Nr sold | per day | +|-------+------+---------+---------| +| Jan | 23 | 55 | 2.4 | +| Feb | 21 | 16 | 0.8 | +| March | 22 | 278 | 12.6 | +,#+TBLFM: $4=$3/$2;%.1f +\end{comment} +#+end_example + +The LaTeX translator function ~orgtbl-to-latex~ is already part of +Orgtbl mode and uses a =tabular= environment to typeset the table and +marks horizontal lines with ~\hline~. For additional parameters to +control output, see [[*Translator functions]]: + +- =:splice BOOLEAN= :: + + When {{{var(BOOLEAN}}} is non-~nil~, return only table body lines; + i.e., not wrapped in =tabular= environment. Default is ~nil~. + +- =:fmt FMT= :: + + Format string to warp each field. It should contain =%s= for the + original field value. For example, to wrap each field value in + dollar symbol, you could use =:fmt "$%s$"=. Format can also wrap + a property list with column numbers and formats, for example =:fmt + (2 "$%s$" 4 "%s\\%%")=. In place of a string, a function of one + argument can be used; the function must return a formatted string. + +- =:efmt EFMT= :: + + Format numbers as exponentials. The spec should have =%s= twice for + inserting mantissa and exponent, for example ="%s\\times10^{%s}"=. This + may also be a property list with column numbers and formats, for + example =:efmt (2 "$%s\\times10^{%s}$" 4 "$%s\\cdot10^{%s}$")=. After + {{{var(EFMT)}}} has been applied to a value, {{{var(FMT)}}}---see + above---is also applied. Functions with two arguments can be + supplied instead of strings. By default, no special formatting is + applied. + +*** Translator functions +:PROPERTIES: +:DESCRIPTION: Copy and modify. +:END: +#+cindex: HTML, and Orgtbl mode +#+cindex: translator function + +#+findex: orgtbl-to-csv +#+findex: orgtbl-to-tsv +#+findex: orgtbl-to-latex +#+findex: orgtbl-to-html +#+findex: orgtbl-to-texinfo +#+findex: orgtbl-to-unicode +#+findex: orgtbl-to-orgtbl +#+findex: orgtbl-to-generic +Orgtbl mode has built-in translator functions: ~orgtbl-to-csv~ +(comma-separated values), ~orgtbl-to-tsv~ (TAB-separated values), +~orgtbl-to-latex~, ~orgtbl-to-html~, ~orgtbl-to-texinfo~, +~orgtbl-to-unicode~ and ~orgtbl-to-orgtbl~. They use the generic +translator, ~orgtbl-to-generic~, which delegates translations to +various export back-ends. + +Properties passed to the function through the =ORGTBL SEND= line take +precedence over properties defined inside the function. For example, +this overrides the default LaTeX line endings, ~\\~, with ~\\[2mm]~: + +: #+ORGTBL: SEND test orgtbl-to-latex :lend " \\\\[2mm]" + +For a new language translator, define a converter function. It can be +a generic function, such as shown in this example. It marks +a beginning and ending of a table with =!BTBL!= and =!ETBL!=; +a beginning and ending of lines with =!BL!= and =!EL!=; and uses a TAB +for a field separator: + +#+begin_src emacs-lisp +(defun orgtbl-to-language (table params) + "Convert the orgtbl-mode TABLE to language." + (orgtbl-to-generic + table + (org-combine-plists + '(:tstart "!BTBL!" :tend "!ETBL!" :lstart "!BL!" :lend "!EL!" :sep "\t") + params))) +#+end_src + +#+texinfo: @noindent +The documentation for the ~orgtbl-to-generic~ function shows +a complete list of parameters, each of which can be passed through to +~orgtbl-to-latex~, ~orgtbl-to-texinfo~, and any other function using +that generic function. + +For complicated translations the generic translator function could be +replaced by a custom translator function. Such a custom function must +take two arguments and return a single string containing the formatted +table. The first argument is the table whose lines are a list of +fields or the symbol ~hline~. The second argument is the property +list consisting of parameters specified in the =#+ORGTBL: SEND= line. +Please share your translator functions by posting them to the Org +users mailing list, at mailto:emacs-orgmode@gnu.org. + +** Dynamic Blocks +:PROPERTIES: +:DESCRIPTION: Automatically filled blocks. +:END: +#+cindex: dynamic blocks + +Org supports /dynamic blocks/ in Org documents. They are inserted +with begin and end markers like any other code block, but the contents +are updated automatically by a user function. + +#+kindex: C-c C-x x +#+findex: org-dynamic-block-insert-dblock +You can insert a dynamic block with ~org-dynamic-block-insert-dblock~, +which is bound to {{{kbd(C-c C-x x)}}} by default. For example, +{{{kbd(C-c C-x x c l o c k t a b l e RET)}}} inserts a table that +updates the work time (see [[*Clocking Work Time]]). + +Dynamic blocks can have names and function parameters. The syntax is +similar to source code block specifications: + +#+begin_example +,#+BEGIN: myblock :parameter1 value1 :parameter2 value2 ... + ... +,#+END: +#+end_example + +These commands update dynamic blocks: + +- {{{kbd(C-c C-x C-u)}}} (~org-dblock-update~) :: + + #+kindex: C-c C-x C-u + #+findex: org-dblock-update + Update dynamic block at point. + +- {{{kbd(C-u C-c C-x C-u)}}} :: + + #+kindex: C-u C-c C-x C-u + Update all dynamic blocks in the current file. + +Before updating a dynamic block, Org removes content between the +=BEGIN= and =END= markers. Org then reads the parameters on the +=BEGIN= line for passing to the writer function as a plist. The +previous content of the dynamic block becomes erased from the buffer +and appended to the plist under ~:content~. + +The syntax for naming a writer function with a dynamic block labeled +=myblock= is: ~org-dblock-write:myblock~. + +The following is an example of a dynamic block and a block writer function +that updates the time when the function was last run: + +#+begin_example +,#+BEGIN: block-update-time :format "on %m/%d/%Y at %H:%M" + ... +,#+END: +#+end_example + +#+texinfo: @noindent +The dynamic block's writer function: + +#+begin_src emacs-lisp +(defun org-dblock-write:block-update-time (params) + (let ((fmt (or (plist-get params :format) "%d. %m. %Y"))) + (insert "Last block update at: " + (format-time-string fmt)))) +#+end_src + +To keep dynamic blocks up-to-date in an Org file, use the function, +~org-update-all-dblocks~ in hook, such as ~before-save-hook~. The +~org-update-all-dblocks~ function does not run if the file is not in +Org mode. + +#+findex: org-narrow-to-block +Dynamic blocks, like any other block, can be narrowed with +~org-narrow-to-block~. + +** Special Agenda Views +:PROPERTIES: +:DESCRIPTION: Customized views. +:END: +#+cindex: agenda views, user-defined + +#+vindex: org-agenda-skip-function +#+vindex: org-agenda-skip-function-global +Org provides a special hook to further limit items in agenda views: +~agenda~, ~agenda*~[fn:159], ~todo~, ~alltodo~, ~tags~, ~tags-todo~, +~tags-tree~. Specify a custom function that tests inclusion of every +matched item in the view. This function can also skip as much as is +needed. + +For a global condition applicable to agenda views, use the +~org-agenda-skip-function-global~ variable. Org uses a global +condition with ~org-agenda-skip-function~ for custom searching. + +This example defines a function for a custom view showing TODO items +with =waiting= status. Manually this is a multi-step search process, +but with a custom view, this can be automated as follows: + +The custom function searches the subtree for the =waiting= tag and +returns ~nil~ on match. Otherwise it gives the location from where +the search continues. + +#+begin_src emacs-lisp +(defun my-skip-unless-waiting () + "Skip trees that are not waiting" + (let ((subtree-end (save-excursion (org-end-of-subtree t)))) + (if (re-search-forward ":waiting:" subtree-end t) + nil ; tag found, do not skip + subtree-end))) ; tag not found, continue after end of subtree +#+end_src + +To use this custom function in a custom agenda command: + +#+begin_src emacs-lisp +(org-add-agenda-custom-command + '("b" todo "PROJECT" + ((org-agenda-skip-function 'my-skip-unless-waiting) + (org-agenda-overriding-header "Projects waiting for something: ")))) +#+end_src + +#+vindex: org-agenda-overriding-header +Note that this also binds ~org-agenda-overriding-header~ to a more +meaningful string suitable for the agenda view. + +#+vindex: org-odd-levels-only +#+vindex: org-agenda-skip-function +Search for entries with a limit set on levels for the custom search. +This is a general approach to creating custom searches in Org. To +include all levels, use =LEVEL>0=[fn:160]. Then to selectively pick +the matched entries, use ~org-agenda-skip-function~, which also +accepts Lisp forms, such as ~org-agenda-skip-entry-if~ and +~org-agenda-skip-subtree-if~. For example: + +- =(org-agenda-skip-entry-if 'scheduled)= :: + + Skip current entry if it has been scheduled. + +- =(org-agenda-skip-entry-if 'notscheduled)= :: + + Skip current entry if it has not been scheduled. + +- =(org-agenda-skip-entry-if 'deadline)= :: + + Skip current entry if it has a deadline. + +- =(org-agenda-skip-entry-if 'scheduled 'deadline)= :: + + Skip current entry if it has a deadline, or if it is scheduled. + +- =(org-agenda-skip-entry-if 'todo '("TODO" "WAITING"))= :: + + Skip current entry if the TODO keyword is TODO or WAITING. + +- =(org-agenda-skip-entry-if 'todo 'done)= :: + + Skip current entry if the TODO keyword marks a DONE state. + +- =(org-agenda-skip-entry-if 'timestamp)= :: + + Skip current entry if it has any timestamp, may also be deadline or + scheduled. + +- =(org-agenda-skip-entry-if 'regexp "regular expression")= :: + + Skip current entry if the regular expression matches in the entry. + +- =(org-agenda-skip-entry-if 'notregexp "regular expression")= :: + + Skip current entry unless the regular expression matches. + +- =(org-agenda-skip-subtree-if 'regexp "regular expression")= :: + + Same as above, but check and skip the entire subtree. + +The following is an example of a search for =waiting= without the +special function: + +#+begin_src emacs-lisp +(org-add-agenda-custom-command + '("b" todo "PROJECT" + ((org-agenda-skip-function '(org-agenda-skip-subtree-if + 'regexp ":waiting:")) + (org-agenda-overriding-header "Projects waiting for something: ")))) +#+end_src + +** Speeding Up Your Agendas +:PROPERTIES: +:DESCRIPTION: Tips on how to speed up your agendas. +:END: +#+cindex: agenda views, optimization + +Some agenda commands slow down when the Org files grow in size or +number. Here are tips to speed up: + +- Reduce the number of Org agenda files to avoid slowdowns due to hard drive + accesses. + +- Reduce the number of DONE and archived headlines so agenda + operations that skip over these can finish faster. + +- Do not dim blocked tasks: + #+vindex: org-agenda-dim-blocked-tasks + + #+begin_src emacs-lisp + (setq org-agenda-dim-blocked-tasks nil) + #+end_src + +- Stop preparing agenda buffers on startup: + #+vindex: org-startup-folded + #+vindex: org-agenda-inhibit-startup + + #+begin_src emacs-lisp + (setq org-agenda-inhibit-startup t) + #+end_src + +- Disable tag inheritance for agendas: + #+vindex: org-agenda-show-inherited-tags + #+vindex: org-agenda-use-tag-inheritance + + #+begin_src emacs-lisp + (setq org-agenda-use-tag-inheritance nil) + #+end_src + +These options can be applied to selected agenda views. For more +details about generation of agenda views, see the docstrings for the +relevant variables, and this [[https://orgmode.org/worg/agenda-optimization.html][dedicated Worg page]] for agenda +optimization. + +** Extracting Agenda Information +:PROPERTIES: +:DESCRIPTION: Post-processing agenda information. +:END: +#+cindex: agenda, pipe +#+cindex: scripts, for agenda processing + +Org provides commands to access agendas through Emacs batch mode. +Through this command-line interface, agendas are automated for further +processing or printing. + +#+vindex: org-agenda-custom-commands +#+findex: org-batch-agenda +~org-batch-agenda~ creates an agenda view in ASCII and outputs to +standard output. This command takes one string parameter. When +string consists of a single character, Org uses it as a key to +~org-agenda-custom-commands~. These are the same ones available +through the agenda dispatcher (see [[*The Agenda Dispatcher]]). + +This example command line directly prints the TODO list to the printer: + +: emacs -batch -l ~/.emacs -eval '(org-batch-agenda "t")' | lpr + +When the string parameter length is two or more characters, Org +matches it with tags/TODO strings. For example, this example command +line prints items tagged with =shop=, but excludes items tagged with +=NewYork=: + +#+begin_example +emacs -batch -l ~/.emacs \ + -eval '(org-batch-agenda "+shop-NewYork")' | lpr +#+end_example + +#+texinfo: @noindent +An example showing on-the-fly parameter modifications: + +#+begin_example +emacs -batch -l ~/.emacs \ + -eval '(org-batch-agenda "a" \ + org-agenda-span (quote month) \ + org-agenda-include-diary nil \ + org-agenda-files (quote ("~/org/project.org")))' \ + | lpr +#+end_example + +#+texinfo: @noindent +which produces an agenda for the next 30 days from just the +=~/org/projects.org= file. + +#+findex: org-batch-agenda-csv +For structured processing of agenda output, use ~org-batch-agenda-csv~ +with the following fields: + +- category :: The category of the item +- head :: The headline, without TODO keyword, TAGS and PRIORITY +- type :: The type of the agenda entry, can be + + | ~todo~ | selected in TODO match | + | ~tagsmatch~ | selected in tags match | + | ~diary~ | imported from diary | + | ~deadline~ | a deadline | + | ~scheduled~ | scheduled | + | ~timestamp~ | appointment, selected by timestamp | + | ~closed~ | entry was closed on date | + | ~upcoming-deadline~ | warning about nearing deadline | + | ~past-scheduled~ | forwarded scheduled item | + | ~block~ | entry has date block including date | + +- todo :: The TODO keyword, if any +- tags :: All tags including inherited ones, separated by colons +- date :: The relevant date, like =2007-2-14= +- time :: The time, like =15:00-16:50= +- extra :: String with extra planning info +- priority-l :: The priority letter if any was given +- priority-n :: The computed numerical priority + +If the selection of the agenda item was based on a timestamp, +including those items with =DEADLINE= and =SCHEDULED= keywords, then +Org includes date and time in the output. + +If the selection of the agenda item was based on a timestamp (or +deadline/scheduled), then Org includes date and time in the output. + +Here is an example of a post-processing script in Perl. It takes the +CSV output from Emacs and prints with a checkbox: + +#+begin_src perl +#!/usr/bin/perl + +# define the Emacs command to run +$cmd = "emacs -batch -l ~/.emacs -eval '(org-batch-agenda-csv \"t\")'"; + +# run it and capture the output +$agenda = qx{$cmd 2>/dev/null}; + +# loop over all lines +foreach $line (split(/\n/,$agenda)) { + # get the individual values + ($category,$head,$type,$todo,$tags,$date,$time,$extra, + $priority_l,$priority_n) = split(/,/,$line); + # process and print + print "[ ] $head\n"; +} +#+end_src + +** Using the Property API +:PROPERTIES: +:DESCRIPTION: Writing programs that use entry properties. +:END: +#+cindex: API, for properties +#+cindex: properties, API + +Here is a description of the functions that can be used to work with +properties. + +#+attr_texinfo: :options org-entry-properties &optional pom which +#+begin_defun +Get all properties of the entry at point-or-marker {{{var(POM)}}}. +This includes the TODO keyword, the tags, time strings for deadline, +scheduled, and clocking, and any additional properties defined in the +entry. The return value is an alist. Keys may occur multiple times +if the property key was used several times. {{{var(POM)}}} may also +be ~nil~, in which case the current entry is used. If +{{{var(WHICH)}}} is ~nil~ or ~all~, get all properties. If +{{{var(WHICH)}}} is ~special~ or ~standard~, only get that subclass. +#+end_defun + +#+vindex: org-use-property-inheritance +#+findex: org-insert-property-drawer +#+attr_texinfo: :options org-entry-get pom property &optional inherit +#+begin_defun +Get value of {{{var(PROPERTY)}}} for entry at point-or-marker +{{{var(POM)}}}. By default, this only looks at properties defined +locally in the entry. If {{{var(INHERIT)}}} is non-~nil~ and the +entry does not have the property, then also check higher levels of the +hierarchy. If {{{var(INHERIT)}}} is the symbol ~selective~, use +inheritance if and only if the setting of +~org-use-property-inheritance~ selects {{{var(PROPERTY)}}} for +inheritance. +#+end_defun + +#+attr_texinfo: :options org-entry-delete pom property +#+begin_defun +Delete the property {{{var(PROPERTY)}}} from entry at point-or-marker +{{{var(POM)}}}. +#+end_defun + +#+attr_texinfo: :options org-entry-put pom property value +#+begin_defun +Set {{{var(PROPERTY)}}} to {{{var(VALUES)}}} for entry at +point-or-marker POM. +#+end_defun + +#+attr_texinfo: :options org-buffer-property-keys &optional include-specials +#+begin_defun +Get all property keys in the current buffer. +#+end_defun + +#+attr_texinfo: :options org-insert-property-drawer +#+begin_defun +Insert a property drawer for the current entry. Also +#+end_defun + +#+attr_texinfo: :options org-entry-put-multivalued-property pom property &rest values +#+begin_defun +Set {{{var(PROPERTY)}}} at point-or-marker {{{var(POM)}}} to +{{{var(VALUES)}}}. {{{var(VALUES)}}} should be a list of strings. +They are concatenated, with spaces as separators. +#+end_defun + +#+attr_texinfo: :options org-entry-get-multivalued-property pom property +#+begin_defun +Treat the value of the property {{{var(PROPERTY)}}} as +a whitespace-separated list of values and return the values as a list +of strings. +#+end_defun + +#+attr_texinfo: :options org-entry-add-to-multivalued-property pom property value +#+begin_defun +Treat the value of the property {{{var(PROPERTY)}}} as +a whitespace-separated list of values and make sure that +{{{var(VALUE)}}} is in this list. +#+end_defun + +#+attr_texinfo: :options org-entry-remove-from-multivalued-property pom property value +#+begin_defun +Treat the value of the property {{{var(PROPERTY)}}} as +a whitespace-separated list of values and make sure that +{{{var(VALUE)}}} is /not/ in this list. +#+end_defun + +#+attr_texinfo: :options org-entry-member-in-multivalued-property pom property value +#+begin_defun +Treat the value of the property {{{var(PROPERTY)}}} as +a whitespace-separated list of values and check if {{{var(VALUE)}}} is +in this list. +#+end_defun + +#+attr_texinfo: :options org-property-allowed-value-functions +#+begin_defopt +Hook for functions supplying allowed values for a specific property. +The functions must take a single argument, the name of the property, +and return a flat list of allowed values. If =:ETC= is one of the +values, use the values as completion help, but allow also other values +to be entered. The functions must return ~nil~ if they are not +responsible for this property. +#+end_defopt + +** Using the Mapping API +:PROPERTIES: +:DESCRIPTION: Mapping over all or selected entries. +:END: +#+cindex: API, for mapping +#+cindex: mapping entries, API + +Org has sophisticated mapping capabilities to find all entries +satisfying certain criteria. Internally, this functionality is used +to produce agenda views, but there is also an API that can be used to +execute arbitrary functions for each or selected entries. The main +entry point for this API is: + +#+attr_texinfo: :options org-map-entries func &optional match scope &rest skip +#+begin_defun +Call {{{var(FUNC)}}} at each headline selected by {{{var(MATCH)}}} in +{{{var(SCOPE)}}}. + +{{{var(FUNC)}}} is a function or a Lisp form. With point positioned +at the beginning of the headline, call the function without arguments. +Org returns an alist of return values of calls to the function. + +To avoid preserving point, Org wraps the call to {{{var(FUNC)}}} in +~save-excursion~ form. After evaluation, Org moves point to the end +of the line that was just processed. Search continues from that point +forward. This may not always work as expected under some conditions, +such as if the current sub-tree was removed by a previous archiving +operation. In such rare circumstances, Org skips the next entry +entirely when it should not. To stop Org from such skips, make +{{{var(FUNC)}}} set the variable ~org-map-continue-from~ to a specific +buffer position. + +{{{var(MATCH)}}} is a tags/property/TODO match. Org iterates only +matched headlines. Org iterates over all headlines when +{{{var(MATCH)}}} is ~nil~ or ~t~. + +{{{var(SCOPE)}}} determines the scope of this command. It can be any +of: + +- ~nil~ :: + + The current buffer, respecting the restriction, if any. + +- ~tree~ :: + + The subtree started with the entry at point. + +- ~region~ :: + + The entries within the active region, if any. + +- ~file~ :: + + The current buffer, without restriction. + +- ~file-with-archives~ :: + + The current buffer, and any archives associated with it. + +- ~agenda~ :: + + All agenda files. + +- ~agenda-with-archives~ :: + + All agenda files with any archive files associated with them. + +- list of filenames :: + + If this is a list, all files in the list are scanned. + +#+texinfo: @noindent +The remaining arguments are treated as settings for the scanner's +skipping facilities. Valid arguments are: + +- ~archive~ :: + + Skip trees with the =ARCHIVE= tag. + +- ~comment~ :: + + Skip trees with the COMMENT keyword. + +- function or Lisp form :: + + #+vindex: org-agenda-skip-function + Used as value for ~org-agenda-skip-function~, so whenever the + function returns ~t~, {{{var(FUNC)}}} is called for that entry and + search continues from the point where the function leaves it. +#+end_defun + +The mapping routine can call any arbitrary function, even functions +that change meta data or query the property API (see [[*Using the +Property API]]). Here are some handy functions: + +#+attr_texinfo: :options org-todo &optional arg +#+begin_defun +Change the TODO state of the entry. See the docstring of the +functions for the many possible values for the argument +{{{var(ARG)}}}. +#+end_defun + +#+attr_texinfo: :options org-priority &optional action +#+begin_defun +Change the priority of the entry. See the docstring of this function +for the possible values for {{{var(ACTION)}}}. +#+end_defun + +#+attr_texinfo: :options org-toggle-tag tag &optional onoff +#+begin_defun +Toggle the tag {{{var(TAG)}}} in the current entry. Setting +{{{var(ONOFF)}}} to either ~on~ or ~off~ does not toggle tag, but +ensure that it is either on or off. +#+end_defun + +#+attr_texinfo: :options org-promote +#+begin_defun +Promote the current entry. +#+end_defun + +#+attr_texinfo: :options org-demote +#+begin_defun +Demote the current entry. +#+end_defun + +This example turns all entries tagged with =TOMORROW= into TODO +entries with keyword =UPCOMING=. Org ignores entries in comment trees +and archive trees. + +#+begin_src emacs-lisp +(org-map-entries '(org-todo "UPCOMING") + "+TOMORROW" 'file 'archive 'comment) +#+end_src + +The following example counts the number of entries with TODO keyword +=WAITING=, in all agenda files. + +#+begin_src emacs-lisp +(length (org-map-entries t "/+WAITING" 'agenda)) +#+end_src + +* History and Acknowledgments +:PROPERTIES: +:DESCRIPTION: How Org came into being. +:APPENDIX: t +:END: + +** From Carsten +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +Org was born in 2003, out of frustration over the user interface of +the Emacs Outline mode. I was trying to organize my notes and +projects, and using Emacs seemed to be the natural way to go. +However, having to remember eleven different commands with two or +three keys per command, only to hide and show parts of the outline +tree, that seemed entirely unacceptable to me. Also, when using +outlines to take notes, I constantly wanted to restructure the tree, +organizing it parallel to my thoughts and plans. /Visibility cycling/ +and /structure editing/ were originally implemented in the package +=outline-magic.el=, but quickly moved to the more general =org.el=. +As this environment became comfortable for project planning, the next +step was adding /TODO entries/, basic /timestamps/, and /table +support/. These areas highlighted the two main goals that Org still +has today: to be a new, outline-based, plain text mode with innovative +and intuitive editing features, and to incorporate project planning +functionality directly into a notes file. + +Since the first release, literally thousands of emails to me or to the +[[mailto:emacs-orgmode@gnu.org][mailing list]] have provided a constant stream of bug reports, feedback, +new ideas, and sometimes patches and add-on code. Many thanks to +everyone who has helped to improve this package. I am trying to keep +here a list of the people who had significant influence in shaping one +or more aspects of Org. The list may not be complete, if I have +forgotten someone, please accept my apologies and let me know. + +Before I get to this list, a few special mentions are in order: + +- Bastien Guerry :: + + Bastien has written a large number of extensions to Org (most of + them integrated into the core by now), including the LaTeX exporter + and the plain list parser. His support during the early days was + central to the success of this project. Bastien also invented Worg, + helped establishing the Web presence of Org, and sponsored hosting + costs for the orgmode.org website. Bastien stepped in as maintainer + of Org between 2011 and 2013, at a time when I desperately needed + a break. + +- Eric Schulte and Dan Davison :: + + Eric and Dan are jointly responsible for the Org Babel system, which + turns Org into a multi-language environment for evaluating code and + doing literate programming and reproducible research. This has + become one of Org's killer features that define what Org is today. + +- John Wiegley :: + + John has contributed a number of great ideas and patches directly to + Org, including the attachment system (=org-attach.el=), integration + with Apple Mail (=org-mac-message.el=), hierarchical dependencies of + TODO items, habit tracking (=org-habits.el=), and encryption + (=org-crypt.el=). Also, the capture system is really an extended + copy of his great =remember.el=. + +- Sebastian Rose :: + + Without Sebastian, the HTML/XHTML publishing of Org would be the + pitiful work of an ignorant amateur. Sebastian has pushed this part + of Org onto a much higher level. He also wrote =org-info.js=, + a JavaScript program for displaying webpages derived from Org using + an Info-like or a folding interface with single-key navigation. + +See below for the full list of contributions! Again, please let me +know what I am missing here! + +** From Bastien +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +I (Bastien) have been maintaining Org between 2011 and 2013. This +appendix would not be complete without adding a few more +acknowledgments and thanks. + +I am first grateful to Carsten for his trust while handing me over the +maintainership of Org. His unremitting support is what really helped +me getting more confident over time, with both the community and the +code. + +When I took over maintainership, I knew I would have to make Org more +collaborative than ever, as I would have to rely on people that are +more knowledgeable than I am on many parts of the code. Here is +a list of the persons I could rely on, they should really be +considered co-maintainers, either of the code or the community: + +- Eric Schulte :: + + Eric is maintaining the Babel parts of Org. His reactivity here + kept me away from worrying about possible bugs here and let me focus + on other parts. + +- Nicolas Goaziou :: + + Nicolas is maintaining the consistency of the deepest parts of Org. + His work on =org-element.el= and =ox.el= has been outstanding, and + it opened the doors for many new ideas and features. He rewrote + many of the old exporters to use the new export engine, and helped + with documenting this major change. More importantly (if that's + possible), he has been more than reliable during all the work done + for Org 8.0, and always very reactive on the mailing list. + +- Achim Gratz :: + + Achim rewrote the building process of Org, turning some /ad hoc/ + tools into a flexible and conceptually clean process. He patiently + coped with the many hiccups that such a change can create for users. + +- Nick Dokos :: + + The Org mode mailing list would not be such a nice place without + Nick, who patiently helped users so many times. It is impossible to + overestimate such a great help, and the list would not be so active + without him. + +I received support from so many users that it is clearly impossible to +be fair when shortlisting a few of them, but Org's history would not +be complete if the ones above were not mentioned in this manual. + +** List of Contributions +:PROPERTIES: +:UNNUMBERED: notoc +:END: + +- Russell Adams came up with the idea for drawers. + +- Thomas Baumann wrote =ol-bbdb.el= and =ol-mhe.el=. + +- Christophe Bataillon created the great unicorn logo that we use on + the Org mode website. + +- Alex Bochannek provided a patch for rounding timestamps. + +- Jan Böcker wrote =ol-docview.el=. + +- Brad Bozarth showed how to pull RSS feed data into Org files. + +- Tom Breton wrote =org-choose.el=. + +- Charles Cave's suggestion sparked the implementation of templates + for Remember, which are now templates for capture. + +- Timothy E Chapman worked on a complete overhaul of the orgmode.org + website in 2020 and helped fixing various bugs. + +- Pavel Chalmoviansky influenced the agenda treatment of items with + specified time. + +- Gregory Chernov patched support for Lisp forms into table + calculations and improved XEmacs compatibility, in particular by + porting =nouline.el= to XEmacs. + +- Sacha Chua suggested copying some linking code from Planner. + +- Baoqiu Cui contributed the DocBook exporter. + +- Eddward DeVilla proposed and tested checkbox statistics. He also + came up with the idea of properties, and that there should be an API + for them. + +- Nick Dokos tracked down several nasty bugs. + +- Kees Dullemond used to edit projects lists directly in HTML and so + inspired some of the early development, including HTML export. He + also asked for a way to narrow wide table columns. + +- Thomas\nbsp{}S.\nbsp{}Dye contributed documentation on Worg and helped + integrating the Org Babel documentation into the manual. + +- Christian Egli converted the documentation into Texinfo format, + inspired the agenda, patched CSS formatting into the HTML exporter, + and wrote =org-taskjuggler.el=. + +- David Emery provided a patch for custom CSS support in exported HTML + agendas. + +- Nic Ferrier contributed mailcap and XOXO support. + +- Miguel\nbsp{}A.\nbsp{}Figueroa-Villanueva implemented hierarchical checkboxes. + +- John Foerch figured out how to make incremental search show context + around a match in a hidden outline tree. + +- Raimar Finken wrote =org-git-line.el=. + +- Mikael Fornius works as a mailing list moderator. + +- Austin Frank works as a mailing list moderator. + +- Eric Fraga drove the development of Beamer export with ideas and + testing. + +- Barry Gidden did proofreading the manual in preparation for the book + publication through Network Theory Ltd. + +- Niels Giesen had the idea to automatically archive DONE trees. + +- Nicolas Goaziou rewrote much of the plain list code. + +- Kai Grossjohann pointed out key-binding conflicts with other + packages. + +- Brian Gough of Network Theory Ltd publishes the Org mode manual as + a book. + +- Bernt Hansen has driven much of the support for auto-repeating + tasks, task state change logging, and the clocktable. His clear + explanations have been critical when we started to adopt the Git + version control system. + +- Manuel Hermenegildo has contributed various ideas, small fixes and + patches. + +- Phil Jackson wrote =ol-irc.el=. + +- Scott Jaderholm proposed footnotes, control over whitespace between + folded entries, and column view for properties. + +- Matt Jones wrote MobileOrg Android. + +- Tokuya Kameshima wrote =org-wl.el= and =org-mew.el=. + +- Shidai Liu ("Leo") asked for embedded LaTeX and tested it. He also + provided frequent feedback and some patches. + +- Matt Lundin has proposed last-row references for table formulas and + named invisible anchors. He has also worked a lot on the FAQ. + +- David Maus wrote =org-atom.el=, maintains the issues file for Org, + and is a prolific contributor on the mailing list with competent + replies, small fixes and patches. + +- Jason\nbsp{}F.\nbsp{}McBrayer suggested agenda export to CSV format. + +- Kyle Meyer helped setting up the [[https://public-inbox.org/][public-inbox]] archive of the [[https://orgmode.org/list/][Org + mailing list]] and has been fixing many bugs. + +- Max Mikhanosha came up with the idea of refiling. + +- Dmitri Minaev sent a patch to set priority limits on a per-file + basis. + +- Stefan Monnier provided a patch to keep the Emacs Lisp compiler + happy. + +- Richard Moreland wrote MobileOrg for the iPhone. + +- Rick Moynihan proposed allowing multiple TODO sequences in a file + and being able to quickly restrict the agenda to a subtree. + +- Todd Neal provided patches for links to Info files and Elisp forms. + +- Greg Newman refreshed the unicorn logo into its current form. + +- Tim O'Callaghan suggested in-file links, search options for general + file links, and tags. + +- Osamu Okano wrote =orgcard2ref.pl=, a Perl program to create a text + version of the reference card. + +- Takeshi Okano translated the manual and David O'Toole's tutorial + into Japanese. + +- Oliver Oppitz suggested multi-state TODO items. + +- Scott Otterson sparked the introduction of descriptive text for + links, among other things. + +- Pete Phillips helped during the development of the TAGS feature, + and provided frequent feedback. + +- Martin Pohlack provided the code snippet to bundle character + insertion into bundles of 20 for undo. + +- Ihor Radchenko helped with fixing bugs and improving the user + experience regarding Org's speed. + +- T.\nbsp{}V.\nbsp{}Raman reported bugs and suggested improvements. + +- Matthias Rempe (Oelde) provided ideas, Windows support, and quality + control. + +- Paul Rivier provided the basic implementation of named footnotes. + He also acted as mailing list moderator for some time. + +- Kevin Rogers contributed code to access VM files on remote hosts. + +- Frank Ruell solved the mystery of the =keymapp nil= bug, a conflict + with =allout.el=. + +- Jason Riedy generalized the send-receive mechanism for Orgtbl + tables with extensive patches. + +- Philip Rooke created the Org reference card, provided lots of + feedback, developed and applied standards to the Org documentation. + +- Christian Schlauer proposed angular brackets around links, among + other things. + +- Paul Sexton wrote =org-ctags.el=. + +- Tom Shannon's =organizer-mode.el= inspired linking to VM/BBDB/Gnus. + +- Ilya Shlyakhter proposed the Archive Sibling, line numbering in + literal examples, and remote highlighting for referenced code lines. + +- Stathis Sideris wrote the =ditaa.jar= ASCII to PNG converter that is + now packaged into the [[https://git.sr.ht/~bzg/org-contrib][org-contrib]] repository. + +- Daniel Sinder came up with the idea of internal archiving by locking + subtrees. + +- Dale Smith proposed link abbreviations. + +- James TD Smith has contributed a large number of patches for + useful tweaks and features. + +- Adam Spiers asked for global linking commands, inspired the link + extension system, added support for Mairix, and proposed the mapping + API. + +- Ulf Stegemann created the table to translate special symbols to + HTML, LaTeX, UTF-8, Latin-1 and ASCII. + +- Andy Stewart contributed code to =ol-w3m.el=, to copy + HTML content with links transformation to Org syntax. + +- David O'Toole wrote =org-publish.el= and drafted the + manual chapter about publishing. + +- Jambunathan\nbsp{}K.\nbsp{}contributed the ODT exporter. + +- Sebastien Vauban reported many issues with LaTeX and Beamer export + and enabled source code highlighting in Gnus. + +- Stefan Vollmar organized a video-recorded talk at the + Max-Planck-Institute for Neurology. He also inspired the creation + of a concept index for HTML export. + +- Jürgen Vollmer contributed code generating the table of contents in + HTML output. + +- Samuel Wales has provided important feedback and bug reports. + +- Chris Wallace provided a patch implementing the =QUOTE= block. + +- David Wainberg suggested archiving, and improvements to the + linking system. + +- Carsten Wimmer suggested some changes and helped fix a bug in + linking to Gnus. + +- Roland Winkler requested additional key bindings to make Org work on + a TTY. + +- Piotr Zielinski wrote =org-mouse.el=, proposed agenda + blocks and contributed various ideas and code snippets. + +- Marco Wahl wrote =ol-eww.el=. + +* GNU Free Documentation License +:PROPERTIES: +:APPENDIX: t +:DESCRIPTION: The license for this documentation. +:END: + +#+include: fdl.org + +* Main Index +:PROPERTIES: +:INDEX: cp +:DESCRIPTION: An index of Org's concepts and features. +:END: + +* Key Index +:PROPERTIES: +:DESCRIPTION: Key bindings and where they are described. +:INDEX: ky +:END: + +* Command and Function Index +:PROPERTIES: +:DESCRIPTION: Command names and some internal functions. +:INDEX: fn +:END: + +* Variable Index +:PROPERTIES: +:DESCRIPTION: Variables mentioned in the manual. +:INDEX: vr +:END: + +This is not a complete index of variables and faces, only the ones +that are mentioned in the manual. For a more complete list, use +{{{kbd(M-x org-customize)}}} and then click yourself through the tree. + +* Copying +:PROPERTIES: +:copying: t +:END: + +This manual is for Org version {{{version}}}. + +Copyright \copy 2004--2021 Free Software Foundation, Inc. + +#+begin_quote +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, with the Front-Cover Texts being "A GNU Manual," +and with the Back-Cover Texts as in (a) below. A copy of the license +is included in the section entitled "GNU Free Documentation License." + +(a) The FSF's Back-Cover Text is: "You have the freedom to copy and +modify this GNU manual." +#+end_quote + +* Export Setup :noexport: + +#+setupfile: doc-setup.org + +#+export_file_name: org.texi + +#+texinfo_dir_category: Emacs editing modes +#+texinfo_dir_title: Org Mode: (org) +#+texinfo_dir_desc: Outline-based notes management and organizer + +* Footnotes + +[fn:1] If you do not use Font Lock globally turn it on in Org buffer +with =(add-hook 'org-mode-hook #'turn-on-font-lock)=. + +[fn:2] Please consider subscribing to the mailing list in order to +minimize the work the mailing list moderators have to do. + +[fn:3] See the variables ~org-special-ctrl-a/e~, ~org-special-ctrl-k~, +and ~org-ctrl-k-protect-subtree~ to configure special behavior of +{{{kbd(C-a)}}}, {{{kbd(C-e)}}}, and {{{kbd(C-k)}}} in headlines. Note +also that clocking only works with headings indented less than 30 +stars. + +[fn:4] See, however, the option ~org-cycle-emulate-tab~. + +[fn:5] The indirect buffer contains the entire buffer, but is narrowed +to the current tree. Editing the indirect buffer also changes the +original buffer, but without affecting visibility in that buffer. For +more information about indirect buffers, see [[info:emacs#Indirect Buffers][GNU Emacs Manual]]. + +[fn:6] When ~org-agenda-inhibit-startup~ is non-~nil~, Org does not +honor the default visibility state when first opening a file for the +agenda (see [[*Speeding Up Your Agendas]]). + +[fn:7] See also the variable ~org-show-context-detail~ to decide how +much context is shown around each match. + +[fn:8] This depends on the option ~org-remove-highlights-with-change~. + +[fn:9] When using =*= as a bullet, lines must be indented so that they +are not interpreted as headlines. Also, when you are hiding leading +stars to get a clean outline view, plain list items starting with +a star may be hard to distinguish from true headlines. In short: even +though =*= is supported, it may be better to not use it for plain list +items. + +[fn:10] You can filter out any of them by configuring +~org-plain-list-ordered-item-terminator~. + +[fn:11] You can also get =a.=, =A.=, =a)= and =A)= by configuring +~org-list-allow-alphabetical~. To minimize confusion with normal +text, those are limited to one character only. Beyond that limit, +bullets automatically become numbers. + +[fn:12] If there's a checkbox in the item, the cookie must be put +/before/ the checkbox. If you have activated alphabetical lists, you +can also use counters like =[@b]=. + +[fn:13] If you do not want the item to be split, customize the +variable ~org-M-RET-may-split-line~. + +[fn:14] If you want to cycle around items that way, you may customize +~org-list-use-circular-motion~. + +[fn:15] See ~org-list-use-circular-motion~ for a cyclic behavior. + +[fn:16] Many desktops intercept {{{kbd(M-TAB)}}} to switch windows. +Use {{{kbd(C-M-i)}}} or {{{kbd(ESC TAB)}}} instead. + +[fn:17] To insert a vertical bar into a table field, use =\vert= or, +inside a word =abc\vert{}def=. + +[fn:18] Org understands references typed by the user as =B4=, but it +does not use this syntax when offering a formula for editing. You can +customize this behavior using the variable +~org-table-use-standard-references~. + +[fn:19] The computation time scales as O(N^2) because table +{{{var(FOO)}}} is parsed for each field to be copied. + +[fn:20] The file =constants.el= can supply the values of constants in +two different unit systems, =SI= and =cgs=. Which one is used depends +on the value of the variable ~constants-unit-system~. You can use the +=STARTUP= options =constSI= and =constcgs= to set this value for the +current buffer. + +[fn:21] The printf reformatting is limited in precision because the +value passed to it is converted into an "integer" or "double". The +"integer" is limited in size by truncating the signed value to 32 +bits. The "double" is limited in precision to 64 bits overall which +leaves approximately 16 significant decimal digits. + +[fn:22] Such names must start with an alphabetic character and use +only alphanumeric/underscore characters. + +[fn:23] Plain URIs are recognized only for a well-defined set of +schemes. See [[*External Links]]. Unlike URI syntax, they cannot contain +parenthesis or white spaces, either. URIs within angle brackets have +no such limitation. + +[fn:24] More accurately, the precise behavior depends on how point +arrived there---see [[info:elisp#Invisible Text][Invisible Text]]. + +[fn:25] To insert a link targeting a headline, in-buffer completion +can be used. Just type a star followed by a few optional letters into +the buffer and press {{{kbd(M-TAB)}}}. All headlines in the current +buffer are offered as completions. + +[fn:26] When targeting a =NAME= keyword, the =CAPTION= keyword is +mandatory in order to get proper numbering (see [[*Captions]]). + +[fn:27] The actual behavior of the search depends on the value of the +variable ~org-link-search-must-match-exact-headline~. If its value is +~nil~, then a fuzzy text search is done. If it is ~t~, then only the +exact headline is matched, ignoring spaces and statistic cookies. If +the value is ~query-to-create~, then an exact headline is searched; if +it is not found, then the user is queried to create it. + +[fn:28] If the headline contains a timestamp, it is removed from the +link, which results in a wrong link---you should avoid putting +a timestamp in the headline. + +[fn:29] The Org Id library must first be loaded, either through +~org-customize~, by enabling ~id~ in ~org-modules~, or by adding +=(require 'org-id)= in your Emacs init file. + +[fn:30] Note that you do not have to use this command to insert +a link. Links in Org are plain text, and you can type or paste them +straight into the buffer. By using this command, the links are +automatically enclosed in double brackets, and you will be asked for +the optional descriptive text. + +[fn:31] After insertion of a stored link, the link will be removed +from the list of stored links. To keep it in the list for later use, +use a triple {{{kbd(C-u)}}} prefix argument to {{{kbd(C-c C-l)}}}, or +configure the option ~org-link-keep-stored-after-insertion~. + +[fn:32] This works if a function has been defined in the ~:complete~ +property of a link in ~org-link-parameters~. + +[fn:33] See the variable ~org-link-use-indirect-buffer-for-internals~. + +[fn:34] For backward compatibility, line numbers can also follow a +single colon. + +[fn:35] Of course, you can make a document that contains only long +lists of TODO items, but this is not required. + +[fn:36] Changing the variable ~org-todo-keywords~ only becomes +effective after restarting Org mode in a buffer. + +[fn:37] This is also true for the {{{kbd(t)}}} command in the agenda +buffer. + +[fn:38] All characters are allowed except =@=, =^= and =!=, which have +a special meaning here. + +[fn:39] Check also the variable ~org-fast-tag-selection-include-todo~, +it allows you to change the TODO state through the tags interface (see +[[*Setting Tags]]), in case you like to mingle the two concepts. Note +that this means you need to come up with unique keys across both sets +of keywords. + +[fn:40] Org mode parses these lines only when Org mode is activated +after visiting a file. {{{kbd(C-c C-c)}}} with point in a line +starting with =#+= is simply restarting Org mode for the current +buffer. + +[fn:41] The corresponding in-buffer setting is: =#+STARTUP: logdone=. + +[fn:42] The corresponding in-buffer setting is: =#+STARTUP: +lognotedone=. + +[fn:43] See the variable ~org-log-states-order-reversed~. + +[fn:44] Note that the =LOGBOOK= drawer is unfolded when pressing +{{{kbd(SPC)}}} in the agenda to show an entry---use {{{kbd(C-u +SPC)}}} to keep it folded here. + +[fn:45] It is possible that Org mode records two timestamps when you +are using both ~org-log-done~ and state change logging. However, it +never prompts for two notes: if you have configured both, the state +change recording note takes precedence and cancel the closing note. + +[fn:46] See also the option ~org-priority-start-cycle-with-default~. + +[fn:47] To keep subtasks out of the global TODO list, see the option +~org-agenda-todo-list-sublevels~. + +[fn:48] With the exception of description lists. But you can allow it +by modifying ~org-list-automatic-rules~ accordingly. + +[fn:49] Set the variable ~org-hierarchical-checkbox-statistics~ if you +want such cookies to count all checkboxes below the cookie, not just +those belonging to direct children. + +[fn:50] {{{kbd(C-u C-c C-c)}}} on the /first/ item of a list with no +checkbox adds checkboxes to the rest of the list. + +[fn:51] As with all these in-buffer settings, pressing {{{kbd(C-c +C-c)}}} activates any changes in the line. + +[fn:52] This is only true if the search does not involve more complex +tests including properties (see [[*Property Searches]]). + +[fn:53] To extend this default list to all tags used in all agenda +files (see [[*Agenda Views]]), customize the variable +~org-complete-tags-always-offer-all-agenda-tags~. + +[fn:54] Keys are automatically assigned to tags that have no +configured keys. + +[fn:55] If more than one summary type applies to the same property, +the parent values are computed according to the first of them. + +[fn:56] An age can be defined as a duration, using units defined in +~org-duration-units~, e.g., =3d 1h=. If any value in the column is as +such, the summary is also expressed as a duration. + +[fn:57] Please note that the =COLUMNS= definition must be on a single +line; it is wrapped here only because of formatting constraints. + +[fn:58] Contributed packages are not part of Emacs, but are +distributed with the main distribution of Org---visit +[[https://orgmode.org]]. + +[fn:59] The Org date format is inspired by the standard ISO 8601 +date/time format. To use an alternative format, see [[*Custom time +format]]. The day name is optional when you type the date yourself. +However, any date inserted or modified by Org adds that day name, for +reading convenience. + +[fn:60] When working with the standard diary expression functions, you +need to be very careful with the order of the arguments. That order +depends evilly on the variable ~calendar-date-style~. For example, to +specify a date December 12, 2005, the call might look like +=(diary-date 12 1 2005)= or =(diary-date 1 12 2005)= or =(diary-date +2005 12 1)=, depending on the settings. This has been the source of +much confusion. Org mode users can resort to special versions of +these functions like ~org-date~ or ~org-anniversary~. These work just +like the corresponding ~diary-~ functions, but with stable ISO order +of arguments (year, month, day) wherever applicable, independent of +the value of ~calendar-date-style~. + +[fn:61] See the variable ~org-read-date-prefer-future~. You may set +that variable to the symbol ~time~ to even make a time before now +shift the date to tomorrow. + +[fn:62] If you do not need/want the calendar, configure the variable +~org-popup-calendar-for-date-prompt~. + +[fn:63] You can also use the calendar command {{{kbd(.)}}} to jump to +today's date, but if you are inserting an hour specification for your +timestamp, {{{kbd(.)}}} will then insert a dot after the hour. By contrast, +{{{kbd(C-.)}}} will always jump to today's date. + +[fn:64] If you find this distracting, turn off the display with +~org-read-date-display-live~. + +[fn:65] It will still be listed on that date after it has been marked +as done. If you do not like this, set the variable +~org-agenda-skip-scheduled-if-done~. + +[fn:66] The =SCHEDULED= and =DEADLINE= dates are inserted on the line +right below the headline. Do not put any text between this line and +the headline. + +[fn:67] Note the corresponding =STARTUP= options =logredeadline=, +=lognoteredeadline=, and =nologredeadline=. + +[fn:68] Note the corresponding =STARTUP= options =logreschedule=, +=lognotereschedule=, and =nologreschedule=. + +[fn:69] Org does not repeat inactive timestamps, however. See +[[*Timestamps]]. + +[fn:70] In fact, the target state is taken from, in this sequence, the +=REPEAT_TO_STATE= property, the variable ~org-todo-repeat-to-state~ if +it is a string, the previous TODO state if ~org-todo-repeat-to-state~ +is ~t~, or the first state of the TODO state sequence. + +[fn:71] You can change this using the option ~org-log-repeat~, or the +=STARTUP= options =logrepeat=, =lognoterepeat=, and =nologrepeat=. +With =lognoterepeat=, you will also be prompted for a note. + +[fn:72] Clocking only works if all headings are indented with less +than 30 stars. This is a hard-coded limitation of ~lmax~ in +~org-clock-sum~. + +[fn:73] To resume the clock under the assumption that you have worked +on this task while outside Emacs, use =(setq org-clock-persist t)=. + +[fn:74] To add an effort estimate "on the fly", hook a function doing +this to ~org-clock-in-prepare-hook~. + +[fn:75] The last reset of the task is recorded by the =LAST_REPEAT= +property. + +[fn:76] See also the variable ~org-clock-mode-line-total~. + +[fn:77] The corresponding in-buffer setting is: =#+STARTUP: +lognoteclock-out=. + +[fn:78] When using ~:step~, ~untilnow~ starts from the beginning of +2003, not the beginning of time. + +[fn:79] Language terms can be set through the variable +~org-clock-clocktable-language-setup~. + +[fn:80] Note that all parameters must be specified in a single +line---the line is broken here only to fit it into the manual. + +[fn:81] On computers using macOS, idleness is based on actual user +idleness, not just Emacs' idle time. For X11, you can install a +utility program =x11idle.c=, available in the =org-contrib/= +repository, or install the xprintidle package and set it to the +variable ~org-clock-x11idle-program-name~ if you are running Debian, +to get the same general treatment of idleness. On other systems, idle +time refers to Emacs idle time only. + +[fn:82] Please note the pitfalls of summing hierarchical data in +a flat list (see [[*Using Column View in the Agenda]]). + +[fn:83] Note the corresponding =STARTUP= options =logrefile=, +=lognoterefile=, and =nologrefile=. + +[fn:84] Org used to offer four different targets for date/week tree +capture. Now, Org automatically translates these to use +~file+olp+datetree~, applying the ~:time-prompt~ and ~:tree-type~ +properties. Please rewrite your date/week-tree targets using +~file+olp+datetree~ since the older targets are now deprecated. + +[fn:85] A date tree is an outline structure with years on the highest +level, months or ISO weeks as sublevels and then dates on the lowest +level. Tags are allowed in the tree structure. + +[fn:86] When the file name is not absolute, Org assumes it is relative +to ~org-directory~. + +[fn:87] If you need one of these sequences literally, escape the =%= +with a backslash. + +[fn:88] If you define your own link types (see [[*Adding Hyperlink +Types]]), any property you store with ~org-store-link-props~ can be +accessed in capture templates in a similar way. + +[fn:89] This is always the other, not the user. See the variable +~org-link-from-user-regexp~. + +[fn:90] If you move entries or Org files from one directory to +another, you may want to configure ~org-attach-id-dir~ to contain +an absolute path. + +[fn:91] If the value of that variable is not a list, but a single file +name, then the list of agenda files in maintained in that external +file. + +[fn:92] When using the dispatcher, pressing {{{kbd(<)}}} before +selecting a command actually limits the command to the current file, +and ignores ~org-agenda-files~ until the next dispatcher command. + +[fn:93] For backward compatibility, you can also press {{{kbd(1)}}} to +restrict to the current buffer. + +[fn:94] For backward compatibility, you can also press {{{kbd(0)}}} to +restrict to the current region/subtree. + +[fn:95] For backward compatibility, the universal prefix argument +{{{kbd(C-u)}}} causes all TODO entries to be listed before the agenda. +This feature is deprecated, use the dedicated TODO list, or a block +agenda instead (see [[*Block agenda]]). + +[fn:96] The variable ~org-anniversary~ used in the example is just +like ~diary-anniversary~, but the argument order is always according +to ISO and therefore independent of the value of +~calendar-date-style~. + +[fn:97] You can, however, disable this by setting +~org-agenda-search-headline-for-time~ variable to a ~nil~ value. + +[fn:98] Custom agenda commands can preset a filter by binding one of +the variables ~org-agenda-tag-filter-preset~, +~org-agenda-category-filter-preset~, ~org-agenda-effort-filter-preset~ +or ~org-agenda-regexp-filter-preset~ as an option. This filter is +then applied to the view and persists as a basic filter through +refreshes and more secondary filtering. The filter is a global +property of the entire agenda view---in a block agenda, you should +only set this in the global options section, not in the section of an +individual block. + +[fn:99] Only tags filtering is respected here, effort filtering is +ignored. + +[fn:100] You can also create persistent custom functions through +~org-agenda-bulk-custom-functions~. + +[fn:101] This file is parsed for the agenda when +~org-agenda-include-diary~ is set. + +[fn:102] You can provide a description for a prefix key by inserting +a cons cell with the prefix and the description. + +[fn:103] /Planned/ means here that these entries have some planning +information attached to them, like a time-stamp, a scheduled or +a deadline string. See ~org-agenda-entry-types~ on how to set what +planning information is taken into account. + +[fn:104] For HTML you need to install Hrvoje NikÅ¡ić's =htmlize.el= +as an Emacs package from MELPA or from [[https://github.com/hniksic/emacs-htmlize][Hrvoje NikÅ¡ić's repository]]. + +[fn:105] To create PDF output, the Ghostscript ps2pdf utility must be +installed on the system. Selecting a PDF file also creates the +postscript file. + +[fn:106] If you want to store standard views like the weekly agenda or +the global TODO list as well, you need to define custom commands for +them in order to be able to specify file names. + +[fn:107] Quoting depends on the system you use, please check the FAQ +for examples. + +[fn:108] You can turn this on by default by setting the variable +~org-pretty-entities~, or on a per-file base with the =STARTUP= option +=entitiespretty=. + +[fn:109] This behavior can be disabled with =-= export setting (see +[[*Export Settings]]). + +[fn:110] LaTeX is a macro system based on Donald\nbsp{}E.\nbsp{}Knuth's TeX +system. Many of the features described here as "LaTeX" are really +from TeX, but for simplicity I am blurring this distinction. + +[fn:111] When MathJax is used, only the environments recognized by +MathJax are processed. When dvipng, dvisvgm, or ImageMagick suite is +used to create images, any LaTeX environment is handled. + +[fn:112] These are respectively available at +[[http://sourceforge.net/projects/dvipng/]], [[http://dvisvgm.bplaced.net/]] +and from the ImageMagick suite. Choose the converter by setting the +variable ~org-preview-latex-default-process~ accordingly. + +[fn:113] Org mode has a method to test if point is inside such +a fragment, see the documentation of the function +~org-inside-LaTeX-fragment-p~. + +[fn:114] This works automatically for the HTML backend (it requires +version 1.34 of the =htmlize.el= package, which you need to install). +Fontified code chunks in LaTeX can be achieved using either the +[[https://www.ctan.org/pkg/listings][listings]] package or the [[https://www.ctan.org/pkg/minted][minted]] package. Refer to +~org-latex-listings~ for details. + +[fn:115] Source code in code blocks may also be evaluated either +interactively or on export. See [[*Working with Source Code]] for more +information on evaluating code blocks. + +[fn:116] Adding =-k= to =-n -r= /keeps/ the labels in the source code +while using line numbers for the links, which might be useful to +explain those in an Org mode example code. + +[fn:117] You may select a different mode with the variable +~org-edit-fixed-width-region-mode~. + +[fn:118] What Emacs considers to be an image depends on +~image-file-name-extensions~ and ~image-file-name-regexps~. + +[fn:119] The variable ~org-startup-with-inline-images~ can be set +within a buffer with the =STARTUP= options =inlineimages= and +=noinlineimages=. + +[fn:120] The corresponding in-buffer setting is: =#+STARTUP: fninline= +or =#+STARTUP: nofninline=. + +[fn:121] The corresponding in-buffer options are =#+STARTUP: fnadjust= +and =#+STARTUP: nofnadjust=. + +[fn:122] The variable ~org-export-date-timestamp-format~ defines how +this timestamp are exported. + +[fn:123] For export to LaTeX format---or LaTeX-related formats such as +Beamer---, the =org-latex-package-alist= variable needs further +configuration. See [[LaTeX specific export settings]]. + +[fn:124] At the moment, some export back-ends do not obey this +specification. For example, LaTeX export excludes every unnumbered +headline from the table of contents. + +[fn:125] Note that ~org-link-search-must-match-exact-headline~ is +locally bound to non-~nil~. Therefore, ~org-link-search~ only matches +headlines and named elements. + +[fn:126] Since commas separate the arguments, commas within arguments +have to be escaped with the backslash character. So only those +backslash characters before a comma need escaping with another +backslash character. + +[fn:127] For a less drastic behavior, consider using a select tag (see +[[*Export Settings]]) instead. + +[fn:128] If =BEAMER_ENV= is set, Org export adds =B_environment= tag +to make it visible. The tag serves as a visual aid and has no +semantic relevance. + +[fn:129] By default Org loads MathJax from [[https://cdnjs.com][cdnjs.com]] as recommended by +[[https://www.mathjax.org][MathJax]]. + +[fn:130] Please note that exported formulas are part of an HTML +document, and that signs such as =<=, =>=, or =&= have special +meanings. See [[http://docs.mathjax.org/en/latest/tex.html#tex-and-latex-in-html-documents][MathJax TeX and LaTeX support]]. + +[fn:131] See [[http://docs.mathjax.org/en/latest/tex.html#tex-extensions][TeX and LaTeX extensions]] in the [[http://docs.mathjax.org][MathJax manual]] to learn +about extensions. + +[fn:132] If the classes on TODO keywords and tags lead to conflicts, +use the variables ~org-html-todo-kwd-class-prefix~ and +~org-html-tag-class-prefix~ to make them unique. + +[fn:133] This does not allow setting different bibliography compilers +for different files. However, "smart" LaTeX compilation systems, such +as latexmk, can select the correct bibliography compiler. + +[fn:134] Minted uses an external Python package for code highlighting, +which requires the flag =-shell-escape= to be added to +~org-latex-pdf-process~. + +[fn:135] See [[http://docs.oasis-open.org/office/v1.2/OpenDocument-v1.2.html][Open Document Format for Office Applications +(OpenDocument) Version 1.2]]. + +[fn:136] See [[http://www.mathtoweb.com/cgi-bin/mathtoweb_home.pl][MathToWeb]]. + +[fn:137] See [[http://dlmf.nist.gov/LaTeXML/]]. + +[fn:138] [[http://docs.oasis-open.org/office/v1.2/OpenDocument-v1.2.html][OpenDocument-v1.2 Specification]] + +[fn:139] See the == element of the +OpenDocument-v1.2 specification. + +[fn:140] See the attributes =table:template-name=, +=table:use-first-row-styles=, =table:use-last-row-styles=, +=table:use-first-column-styles=, =table:use-last-column-styles=, +=table:use-banding-rows-styles=, and =table:use-banding-column-styles= +of the == element in the OpenDocument-v1.2 specification. + +[fn:141] If the publishing directory is the same as the source +directory, =file.org= is exported as =file.org.org=, so you probably +do not want to do this. + +[fn:142] The option ~org-babel-no-eval-on-ctrl-c-ctrl-c~ can be used +to remove code evaluation from the {{{kbd(C-c C-c)}}} key binding. + +[fn:143] Actually, the constructs =call_()= and =src_{}= +are not evaluated when they appear in a keyword (see [[*Summary of +In-Buffer Settings]]). + +[fn:144] For noweb literate programming details, see +http://www.cs.tufts.edu/~nr/noweb/. + +[fn:145] For more information, please refer to the commentary section +in =org-tempo.el=. + +[fn:146] Org Indent mode also sets ~wrap-prefix~ correctly for +indenting and wrapping long lines of headlines or text. This minor +mode also handles Visual Line mode and directly applied settings +through ~word-wrap~. + +[fn:147] This works, but requires extra effort. Org Indent mode is +more convenient for most applications. + +[fn:148] ~org-adapt-indentation~ can also be set to ='headline-data=, +in which case only data lines below the headline will be indented. + +[fn:149] Note that Org Indent mode also sets the ~wrap-prefix~ +property, such that Visual Line mode (or purely setting ~word-wrap~) +wraps long lines, including headlines, correctly indented. + +[fn:150] For a server to host files, consider using a WebDAV server, +such as [[https://nextcloud.com][Nextcloud]]. Additional help is at this [[https://orgmode.org/worg/org-faq.html#mobileorg_webdav][FAQ entry]]. + +[fn:151] If Emacs is configured for safe storing of passwords, then +configure the variable ~org-mobile-encryption-password~; please read +the docstring of that variable. + +[fn:152] Symbolic links in ~org-directory~ need to have the same name +as their targets. + +[fn:153] While creating the agendas, Org mode forces =ID= properties +on all referenced entries, so that these entries can be uniquely +identified if Org Mobile flags them for further action. To avoid +setting properties configure the variable +~org-mobile-force-id-on-agenda-items~ to ~nil~. Org mode then relies +on outline paths, assuming they are unique. + +[fn:154] Checksums are stored automatically in the file +=checksums.dat=. + +[fn:155] The file will be empty after this operation. + +[fn:156] https://www.ctan.org/pkg/comment + +[fn:157] By default this works only for LaTeX, HTML, and Texinfo. +Configure the variable ~orgtbl-radio-table-templates~ to install +templates for other modes. + +[fn:158] If the =TBLFM= keyword contains an odd number of dollar +characters, this may cause problems with Font Lock in LaTeX mode. As +shown in the example you can fix this by adding an extra line inside +the =comment= environment that is used to balance the dollar +expressions. If you are using AUCTeX with the font-latex library, +a much better solution is to add the =comment= environment to the +variable ~LaTeX-verbatim-environments~. + +[fn:159] The ~agenda*~ view is the same as ~agenda~ except that it +only considers /appointments/, i.e., scheduled and deadline items that +have a time specification =[h]h:mm= in their time-stamps. + +[fn:160] Note that, for ~org-odd-levels-only~, a level number +corresponds to order in the hierarchy, not to the number of stars. diff --git a/elpa/org-9.5.2/doc/org-version.inc b/elpa/org-9.5.2/doc/org-version.inc new file mode 100644 index 0000000..22fb34e --- /dev/null +++ b/elpa/org-9.5.2/doc/org-version.inc @@ -0,0 +1,3 @@ +@c automatically generated, do not edit +@set VERSION 9.5.2 (9.5.2-gfbff08) +@set DATE 2021-12-24 diff --git a/elpa/org-9.5.2/doc/org.texi b/elpa/org-9.5.2/doc/org.texi new file mode 100644 index 0000000..a196989 --- /dev/null +++ b/elpa/org-9.5.2/doc/org.texi @@ -0,0 +1,23491 @@ +\input texinfo @c -*- texinfo -*- +@c %**start of header +@setfilename org.info +@settitle The Org Manual +@documentencoding UTF-8 +@documentlanguage en +@set txicodequoteundirected +@set txicodequotebacktick +@set MAINTAINERSITE @uref{https://orgmode.org,maintainers webpage} +@set MAINTAINER Bastien Guerry +@set MAINTAINEREMAIL @email{bzg@gnu.org} +@set MAINTAINERCONTACT @uref{mailto:bzg@gnu.org,contact the maintainer} +@c %**end of header + +@copying +This manual is for Org version 9.5. + +Copyright @copyright{} 2004--2021 Free Software Foundation, Inc. + +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,'' +and with the Back-Cover Texts as in (a) below. A copy of the license +is included in the section entitled ``GNU Free Documentation License.'' + +(a) The FSF's Back-Cover Text is: ``You have the freedom to copy and +modify this GNU manual.'' + +@end quotation +@end copying + +@dircategory Emacs editing modes +@direntry +* Org Mode: (org). Outline-based notes management and organizer. +@end direntry + +@finalout +@titlepage +@title The Org Manual +@subtitle Release 9.5 +@author The Org Mode Developers +@page +@vskip 0pt plus 1filll +@insertcopying +@end titlepage + +@contents + +@ifnottex +@node Top +@top The Org Manual + +@insertcopying +@end ifnottex + +@menu +* Introduction:: Getting started. +* Document Structure:: A tree works like your brain. +* Tables:: Pure magic for quick formatting. +* Hyperlinks:: Notes in context. +* TODO Items:: Every tree branch can be a TODO item. +* Tags:: Tagging headlines and matching sets of tags. +* Properties and Columns:: Storing information about an entry. +* Dates and Times:: Making items useful for planning. +* Refiling and Archiving:: Moving and copying information with ease. +* Capture and Attachments:: Dealing with external data. +* Agenda Views:: Collecting information into views. +* Markup for Rich Contents:: Compose beautiful documents. +* Exporting:: Sharing and publishing notes. +* Publishing:: Create a web site of linked Org files. +* Citation handling:: create, follow and export citations. +* Working with Source Code:: Export, evaluate, and tangle code blocks. +* Miscellaneous:: All the rest which did not fit elsewhere. +* Hacking:: How to hack your way around. +* History and Acknowledgments:: How Org came into being. +* GNU Free Documentation License:: The license for this documentation. +* Main Index:: An index of Org's concepts and features. +* Key Index:: Key bindings and where they are described. +* Command and Function Index:: Command names and some internal functions. +* Variable Index:: Variables mentioned in the manual. + +@detailmenu +--- The Detailed Node Listing --- + +Introduction + +* Summary:: Brief summary of what Org does. +* Installation:: Installing Org. +* Activation:: How to activate Org for certain buffers. +* Feedback:: Bug reports, ideas, patches, etc. +* Conventions:: Typesetting conventions used in this manual. + +Document Structure + +* Headlines:: How to typeset Org tree headlines. +* Visibility Cycling:: Show and hide, much simplified. +* Motion:: Jumping to other headlines. +* Structure Editing:: Changing sequence and level of headlines. +* Sparse Trees:: Matches embedded in context. +* Plain Lists:: Additional structure within an entry. +* Drawers:: Tucking stuff away. +* Blocks:: Folding blocks. + +Visibility Cycling + +* Global and local cycling:: Cycling through various visibility states. +* Initial visibility:: Setting the initial visibility state. +* Catching invisible edits:: Preventing mistakes when editing invisible parts. + +Tables + +* Built-in Table Editor:: Simple tables. +* Column Width and Alignment:: Overrule the automatic settings. +* Column Groups:: Grouping to trigger vertical lines. +* Orgtbl Mode:: The table editor as minor mode. +* The Spreadsheet:: The table editor has spreadsheet capabilities. +* Org Plot:: Plotting from Org tables. + +The Spreadsheet + +* References:: How to refer to another field or range. +* Formula syntax for Calc:: Using Calc to compute stuff. +* Formula syntax for Lisp:: Writing formulas in Emacs Lisp. +* Durations and time values:: How to compute durations and time values. +* Field and range formulas:: Formula for specific (ranges of) fields. +* Column formulas:: Formulas valid for an entire column. +* Lookup functions:: Lookup functions for searching tables. +* Editing and debugging formulas:: Fixing formulas. +* Updating the table:: Recomputing all dependent fields. +* Advanced features:: Field and column names, automatic recalculation... + +Hyperlinks + +* Link Format:: How links in Org are formatted. +* Internal Links:: Links to other places in the current file. +* Radio Targets:: Make targets trigger links in plain text. +* External Links:: URL-like links to the world. +* Handling Links:: Creating, inserting and following. +* Using Links Outside Org:: Linking from my C source code? +* Link Abbreviations:: Shortcuts for writing complex links. +* Search Options:: Linking to a specific location. +* Custom Searches:: When the default search is not enough. + +TODO Items + +* TODO Basics:: Marking and displaying TODO entries. +* TODO Extensions:: Workflow and assignments. +* Progress Logging:: Dates and notes for progress. +* Priorities:: Some things are more important than others. +* Breaking Down Tasks:: Splitting a task into manageable pieces. +* Checkboxes:: Tick-off lists. + +TODO Extensions + +* Workflow states:: From TODO to DONE in steps. +* TODO types:: I do this, Fred does the rest. +* Multiple sets in one file:: Mixing it all, still finding your way. +* Fast access to TODO states:: Single letter selection of state. +* Per-file keywords:: Different files, different requirements. +* Faces for TODO keywords:: Highlighting states. +* TODO dependencies:: When one task needs to wait for others. + +Progress Logging + +* Closing items:: When was this entry marked as done? +* Tracking TODO state changes:: When did the status change? +* Tracking your habits:: How consistent have you been? + +Tags + +* Tag Inheritance:: Tags use the tree structure of an outline. +* Setting Tags:: How to assign tags to a headline. +* Tag Hierarchy:: Create a hierarchy of tags. +* Tag Searches:: Searching for combinations of tags. + +Properties and Columns + +* Property Syntax:: How properties are spelled out. +* Special Properties:: Access to other Org mode features. +* Property Searches:: Matching property values. +* Property Inheritance:: Passing values down a tree. +* Column View:: Tabular viewing and editing. + +Column View + +* Defining columns:: The COLUMNS format property. +* Using column view:: How to create and use column view. +* Capturing column view:: A dynamic block for column view. + +Defining columns + +* Scope of column definitions:: Where defined, where valid? +* Column attributes:: Appearance and content of a column. + +Dates and Times + +* Timestamps:: Assigning a time to a tree entry. +* Creating Timestamps:: Commands to insert timestamps. +* Deadlines and Scheduling:: Planning your work. +* Clocking Work Time:: Tracking how long you spend on a task. +* Effort Estimates:: Planning work effort in advance. +* Timers:: Notes with a running timer. + +Creating Timestamps + +* The date/time prompt:: How Org mode helps you enter dates and times. +* Custom time format:: Making dates look different. + +Deadlines and Scheduling + +* Inserting deadline/schedule:: Planning items. +* Repeated tasks:: Items that show up again and again. + +Clocking Work Time + +* Clocking commands:: Starting and stopping a clock. +* The clock table:: Detailed reports. +* Resolving idle time:: Resolving time when you've been idle. + +Refiling and Archiving + +* Refile and Copy:: Moving/copying a tree from one place to another. +* Archiving:: What to do with finished products. + +Archiving + +* Moving subtrees:: Moving a tree to an archive file. +* Internal archiving:: Switch off a tree but keep it in the file. + +Capture and Attachments + +* Capture:: Capturing new stuff. +* Attachments:: Attach files to outlines. +* RSS Feeds:: Getting input from RSS feeds. + +Capture + +* Setting up capture:: Where notes will be stored. +* Using capture:: Commands to invoke and terminate capture. +* Capture templates:: Define the outline of different note types. + +Capture templates + +* Template elements:: What is needed for a complete template entry. +* Template expansion:: Filling in information about time and context. +* Templates in contexts:: Only show a template in a specific context. + +Attachments + +* Attachment defaults and dispatcher:: How to access attachment commands +* Attachment options:: Configuring the attachment system +* Attachment links:: Hyperlink access to attachments +* Automatic version-control with Git:: Everything safely stored away +* Attach from Dired:: Using dired to select an attachment + +Agenda Views + +* Agenda Files:: Files being searched for agenda information. +* Agenda Dispatcher:: Keyboard access to agenda views. +* Built-in Agenda Views:: What is available out of the box? +* Presentation and Sorting:: How agenda items are prepared for display. +* Agenda Commands:: Remote editing of Org trees. +* Custom Agenda Views:: Defining special searches and views. +* Exporting Agenda Views:: Writing a view to a file. +* Agenda Column View:: Using column view for collected entries. + +Built-in Agenda Views + +* Weekly/daily agenda:: The calendar page with current tasks. +* Global TODO list:: All unfinished action items. +* Matching tags and properties:: Structured information with fine-tuned search. +* Search view:: Find entries by searching for text. +* Stuck projects:: Find projects you need to review. + +Presentation and Sorting + +* Categories:: Not all tasks are equal. +* Time-of-day specifications:: How the agenda knows the time. +* Sorting of agenda items:: The order of things. +* Filtering/limiting agenda items:: Dynamically narrow the agenda. + +Custom Agenda Views + +* Storing searches:: Type once, use often. +* Block agenda:: All the stuff you need in a single buffer. +* Setting options:: Changing the rules. + +Markup for Rich Contents + +* Paragraphs:: The basic unit of text. +* Emphasis and Monospace:: Bold, italic, etc. +* Subscripts and Superscripts:: Simple syntax for raising/lowering text. +* Special Symbols:: Greek letters and other symbols. +* Embedded @LaTeX{}:: LaTeX can be freely used inside Org documents. +* Literal Examples:: Source code examples with special formatting. +* Images:: Display an image. +* Captions:: Describe tables, images... +* Horizontal Rules:: Make a line. +* Creating Footnotes:: Edit and read footnotes. + +Embedded @LaTeX{} + +* @LaTeX{} fragments:: Complex formulas made easy. +* Previewing @LaTeX{} fragments:: What will this snippet look like? +* CD@LaTeX{} mode:: Speed up entering of formulas. + +Exporting + +* The Export Dispatcher:: The main interface. +* Export Settings:: Common export settings. +* Table of Contents:: The if and where of the table of contents. +* Include Files:: Include additional files into a document. +* Macro Replacement:: Use macros to create templates. +* Comment Lines:: What will not be exported. +* ASCII/Latin-1/UTF-8 export:: Exporting to flat files with encoding. +* Beamer Export:: Producing presentations and slides. +* HTML Export:: Exporting to HTML. +* @LaTeX{} Export:: Exporting to @LaTeX{} and processing to PDF. +* Markdown Export:: Exporting to Markdown. +* OpenDocument Text Export:: Exporting to OpenDocument Text. +* Org Export:: Exporting to Org. +* Texinfo Export:: Exporting to Texinfo. +* iCalendar Export:: Exporting to iCalendar. +* Other Built-in Back-ends:: Exporting to a man page. +* Advanced Export Configuration:: Fine-tuning the export output. +* Export in Foreign Buffers:: Author tables and lists in Org syntax. + +Beamer Export + +* Beamer export commands:: For creating Beamer documents. +* Beamer specific export settings:: For customizing Beamer export. +* Frames and Blocks in Beamer:: For composing Beamer slides. +* Beamer specific syntax:: For using in Org documents. +* Editing support:: Editing support. +* A Beamer example:: A complete presentation. + +HTML Export + +* HTML export commands:: Invoking HTML export. +* HTML specific export settings:: Settings for HTML export. +* HTML doctypes:: Exporting various (X)HTML flavors. +* HTML preamble and postamble:: Inserting preamble and postamble. +* Quoting HTML tags:: Using direct HTML in Org files. +* Headlines in HTML export:: Formatting headlines. +* Links in HTML export:: Inserting and formatting links. +* Tables in HTML export:: How to modify the formatting of tables. +* Images in HTML export:: How to insert figures into HTML output. +* Math formatting in HTML export:: Beautiful math also on the web. +* Text areas in HTML export:: An alternate way to show an example. +* CSS support:: Changing the appearance of the output. +* JavaScript support:: Info and folding in a web browser. + +@LaTeX{} Export + +* @LaTeX{}/PDF export commands:: For producing @LaTeX{} and PDF documents. +* @LaTeX{} specific export settings:: Unique to this @LaTeX{} back-end. +* @LaTeX{} header and sectioning:: Setting up the export file structure. +* Quoting @LaTeX{} code:: Incorporating literal @LaTeX{} code. +* Tables in @LaTeX{} export:: Options for exporting tables to @LaTeX{}. +* Images in @LaTeX{} export:: How to insert figures into @LaTeX{} output. +* Plain lists in @LaTeX{} export:: Attributes specific to lists. +* Source blocks in @LaTeX{} export:: Attributes specific to source code blocks. +* Example blocks in @LaTeX{} export:: Attributes specific to example blocks. +* Special blocks in @LaTeX{} export:: Attributes specific to special blocks. +* Horizontal rules in @LaTeX{} export:: Attributes specific to horizontal rules. +* Verse blocks in @LaTeX{} export:: Attributes specific to special blocks. +* Quote blocks in @LaTeX{} export:: Attributes specific to quote blocks. + +OpenDocument Text Export + +* Pre-requisites for ODT export:: Required packages. +* ODT export commands:: Invoking export. +* ODT specific export settings:: Configuration options. +* Extending ODT export:: Producing DOC, PDF files. +* Applying custom styles:: Styling the output. +* Links in ODT export:: Handling and formatting links. +* Tables in ODT export:: Org tables conversions. +* Images in ODT export:: Inserting images. +* Math formatting in ODT export:: Formatting @LaTeX{} fragments. +* Labels and captions in ODT export:: Rendering objects. +* Literal examples in ODT export:: For source code and example blocks. +* Advanced topics in ODT export:: For power users. + +Math formatting in ODT export + +* @LaTeX{} math snippets:: Embedding in @LaTeX{} format. +* MathML and OpenDocument formula files:: Embedding in native format. + +Texinfo Export + +* Texinfo export commands:: Invoking commands. +* Texinfo specific export settings:: Setting the environment. +* Texinfo file header:: Generating the header. +* Texinfo title and copyright page:: Creating preamble pages. +* Info directory file:: Installing a manual in Info file hierarchy. +* Headings and sectioning structure:: Building document structure. +* Indices:: Creating indices. +* Quoting Texinfo code:: Incorporating literal Texinfo code. +* Plain lists in Texinfo export:: List attributes. +* Tables in Texinfo export:: Table attributes. +* Images in Texinfo export:: Image attributes. +* Quotations in Texinfo export:: Quote block attributes. +* Special blocks in Texinfo export:: Special block attributes. +* A Texinfo example:: Processing Org to Texinfo. + +Export in Foreign Buffers + +* Bare HTML:: Exporting HTML without CSS, Javascript, etc. + +Publishing + +* Configuration:: Defining projects. +* Uploading Files:: How to get files up on the server. +* Sample Configuration:: Example projects. +* Triggering Publication:: Publication commands. + +Configuration + +* Project alist:: The central configuration variable. +* Sources and destinations:: From here to there. +* Selecting files:: What files are part of the project? +* Publishing action:: Setting the function doing the publishing. +* Publishing options:: Tweaking HTML/@LaTeX{} export. +* Publishing links:: Which links keep working after publishing? +* Site map:: Generating a list of all pages. +* Generating an index:: An index that reaches across pages. + +Sample Configuration + +* Simple example:: One-component publishing. +* Complex example:: A multi-component publishing example. + +Citation handling + +* Citations:: +* Citation export processors:: + +Working with Source Code + +* Features Overview:: Enjoy the versatility of source blocks. +* Structure of Code Blocks:: Code block syntax described. +* Using Header Arguments:: Different ways to set header arguments. +* Environment of a Code Block:: Arguments, sessions, working directory... +* Evaluating Code Blocks:: Place results of evaluation in the Org buffer. +* Results of Evaluation:: Choosing a results type, post-processing... +* Exporting Code Blocks:: Export contents and/or results. +* Extracting Source Code:: Create pure source code files. +* Languages:: List of supported code block languages. +* Editing Source Code:: Language major-mode editing. +* Noweb Reference Syntax:: Literate programming in Org mode. +* Library of Babel:: Use and contribute to a library of useful code blocks. +* Key bindings and Useful Functions:: Work quickly with code blocks. +* Batch Execution:: Call functions from the command line. + +Miscellaneous + +* Completion:: @kbd{M-@key{TAB}} guesses completions. +* Structure Templates:: Quick insertion of structural elements. +* Speed Keys:: Electric commands at the beginning of a headline. +* Clean View:: Getting rid of leading stars in the outline. +* Execute commands in the active region:: Execute commands on multiple items in Org or agenda view. +* Dynamic Headline Numbering:: Display and update outline numbering. +* The Very Busy @kbd{C-c C-c} Key:: When in doubt, press @kbd{C-c C-c}. +* In-buffer Settings:: Overview of keywords. +* Regular Expressions:: Elisp regular expressions. +* Org Syntax:: Formal description of Org's syntax. +* Documentation Access:: Read documentation about current syntax. +* Escape Character:: Prevent Org from interpreting your writing. +* Code Evaluation Security:: Org files evaluate in-line code. +* Interaction:: With other Emacs packages. +* TTY Keys:: Using Org on a tty. +* Protocols:: External access to Emacs and Org. +* Org Crypt:: Encrypting Org files. +* Org Mobile:: Viewing and capture on a mobile device. + +Clean View + +* Org Indent Mode:: +* Hard indentation:: + +Interaction + +* Cooperation:: Packages Org cooperates with. +* Conflicts:: Packages that lead to conflicts. + +Protocols + +* The @code{store-link} protocol:: Store a link, push URL to kill-ring. +* The @code{capture} protocol:: Fill a buffer with external information. +* The @code{open-source} protocol:: Edit published contents. + +Org Mobile + +* Setting up the staging area:: For the mobile device. +* Pushing to the mobile application:: Uploading Org files and agendas. +* Pulling from the mobile application:: Integrating captured and flagged items. + +Hacking + +* Hooks:: How to reach into Org's internals. +* Add-on Packages:: Available extensions. +* Adding Hyperlink Types:: New custom link types. +* Adding Export Back-ends:: How to write new export back-ends. +* Tables in Arbitrary Syntax:: Orgtbl for LaTeX and other programs. +* Dynamic Blocks:: Automatically filled blocks. +* Special Agenda Views:: Customized views. +* Speeding Up Your Agendas:: Tips on how to speed up your agendas. +* Extracting Agenda Information:: Post-processing agenda information. +* Using the Property API:: Writing programs that use entry properties. +* Using the Mapping API:: Mapping over all or selected entries. + +Tables in Arbitrary Syntax + +* Radio tables:: Sending and receiving radio tables. +* A @LaTeX{} example:: Step by step, almost a tutorial. +* Translator functions:: Copy and modify. + +@end detailmenu +@end menu + +@node Introduction +@chapter Introduction + +@cindex introduction + +@menu +* Summary:: Brief summary of what Org does. +* Installation:: Installing Org. +* Activation:: How to activate Org for certain buffers. +* Feedback:: Bug reports, ideas, patches, etc. +* Conventions:: Typesetting conventions used in this manual. +@end menu + +@node Summary +@section Summary + +@cindex summary + +Org is a mode for keeping notes, maintaining TODO lists, and project +planning with a fast and effective plain-text markup language. It +also is an authoring system with unique support for literate +programming and reproducible research. + +Org is implemented on top of Outline mode, which makes it possible to +keep the content of large files well structured. Visibility cycling +and structure editing help to work with the tree. Tables are easily +created with a built-in table editor. Plain text URL-like links +connect to websites, emails, Usenet messages, BBDB entries, and any +files related to the projects. + +Org develops organizational tasks around notes files that contain +lists or information about projects as plain text. Project planning +and task management make use of metadata which is part of an outline +node. Based on this data, specific entries can be extracted in +queries and create dynamic @emph{agenda views} that also integrate the +Emacs calendar and diary. Org can be used to implement many different +project planning schemes, such as David Allen's GTD system. + +Org files can serve as a single source authoring system with export to +many different formats such as HTML, @LaTeX{}, Open Document, and +Markdown. New export backends can be derived from existing ones, or +defined from scratch. + +Org files can include source code blocks, which makes Org uniquely +suited for authoring technical documents with code examples. Org +source code blocks are fully functional; they can be evaluated in +place and their results can be captured in the file. This makes it +possible to create a single file reproducible research compendium. + +Org keeps simple things simple. When first fired up, it should feel +like a straightforward, easy to use outliner. Complexity is not +imposed, but a large amount of functionality is available when needed. +Org is a toolbox. Many users actually run only a---very +personal---fraction of Org's capabilities, and know that there is more +whenever they need it. + +All of this is achieved with strictly plain text files, the most +portable and future-proof file format. Org runs in Emacs. Emacs is +one of the most widely ported programs, so that Org mode is available +on every major platform. + +@cindex FAQ +There is a website for Org which provides links to the newest version +of Org, as well as additional information, frequently asked questions +(FAQ), links to tutorials, etc. This page is located at +@uref{https://orgmode.org}. + +@cindex print edition +An earlier version (7.3) of this manual is available as a @uref{http://www.network-theory.co.uk/org/manual/, paperback +book from Network Theory Ltd.}. + +@node Installation +@section Installation + +@cindex installation + +Org is included in all recent distributions of GNU Emacs, so you +probably do not need to install it. Most users will simply activate +Org and begin exploring its many features. + +If, for one reason or another, you want to install Org on top of this +pre-packaged version, you can use the Emacs package system or clone +Org's git repository. + +We @strong{strongly recommend} sticking to a single installation method. + +@anchor{Using Emacs packaging system} +@subheading Using Emacs packaging system + +Recent Emacs distributions include a packaging system which lets you +install Elisp libraries. You can install Org from the ``package menu'', +with @kbd{M-x list-packages}. See @ref{Package Menu,Package Menu,,emacs,}. + +@quotation Important +You need to do this in a session where no @samp{.org} file has been +visited, i.e., where no Org built-in function have been loaded. +Otherwise autoload Org functions will mess up the installation. + +@end quotation + +@anchor{Using Org's git repository} +@subheading Using Org's git repository + +You can clone Org's repository and install Org like this: + +@example +$ cd ~/src/ +$ git clone https://git.savannah.gnu.org/git/emacs/org-mode.git +$ cd org-mode/ +$ make autoloads +@end example + +Note that in this case, @samp{make autoloads} is mandatory: it defines +Org's version in @samp{org-version.el} and Org's autoloads in +@samp{org-loaddefs.el}. + +Remember to add the correct load path as described in the method +above. + +You can also compile with @samp{make}, generate the documentation with +@samp{make doc}, create a local configuration with @samp{make config} and +install Org with @samp{make install}. Please run @samp{make help} to get the +list of compilation/installation options. + +For more detailed explanations on Org's build system, please check the +Org Build System page on @uref{https://orgmode.org/worg/dev/org-build-system.html, Worg}. + +@anchor{Installing Org's contributed packages} +@subheading Installing Org's contributed packages + +Org's repository used to contain @samp{contrib/} directory for add-ons +contributed by others. As of Org 9.5, the directory has bee moved to +this new dedicated @uref{https://git.sr.ht/~bzg/org-contrib, org-contrib} repository, which you can install +separately. + +@node Activation +@section Activation + +@cindex activation +@cindex autoload +@cindex ELPA +@cindex global key bindings +@cindex key bindings, global + +Org mode buffers need Font Lock to be turned on: this is the default +in Emacs@footnote{If you do not use Font Lock globally turn it on in Org buffer +with @samp{(add-hook 'org-mode-hook #'turn-on-font-lock)}.}. + +There are compatibility issues between Org mode and some other Elisp +packages (see @ref{Conflicts}). Please take the +time to check the list. + +@findex org-agenda +@findex org-capture +@findex org-store-link +For a better experience, the three Org commands @code{org-store-link}, +@code{org-capture} and @code{org-agenda} ought to be accessible anywhere in +Emacs, not just in Org buffers. To that effect, you need to bind them +to globally available keys, like the ones reserved for users (see +@ref{Key Binding Conventions,,,elisp,}). Here are suggested bindings, +please modify the keys to your own liking. + +@lisp +(global-set-key (kbd "C-c l") #'org-store-link) +(global-set-key (kbd "C-c a") #'org-agenda) +(global-set-key (kbd "C-c c") #'org-capture) +@end lisp + +@cindex Org mode, turning on +Files with the @samp{.org} extension use Org mode by default. To turn on +Org mode in a file that does not have the extension @samp{.org}, make the +first line of a file look like this: + +@example +MY PROJECTS -*- mode: org; -*- +@end example + + +@vindex org-insert-mode-line-in-empty-file +@noindent +which selects Org mode for this buffer no matter what the file's name +is. See also the variable @code{org-insert-mode-line-in-empty-file}. + +Many commands in Org work on the region if the region is @emph{active}. To +make use of this, you need to have Transient Mark mode turned on, +which is the default. If you do not like it, you can create an active +region by using the mouse to select a region, or pressing +@kbd{C-@key{SPC}} twice before moving point. + +@node Feedback +@section Feedback + +@cindex feedback +@cindex bug reports +@cindex reporting a bug +@cindex maintainer +@cindex author + +If you find problems with Org, or if you have questions, remarks, or +ideas about it, please send an email to the Org mailing list +@email{emacs-orgmode@@gnu.org}. You can subscribe to the list @uref{https://lists.gnu.org/mailman/listinfo/emacs-orgmode, from this +web page}. If you are not a member of the mailing list, your mail will +be passed to the list after a moderator has approved it@footnote{Please consider subscribing to the mailing list in order to +minimize the work the mailing list moderators have to do.}. We ask +you to read and respect the @uref{https://www.gnu.org/philosophy/kind-communication.html, GNU Kind Communications Guidelines} when +sending messages on this mailing list. + +@findex org-version +@findex org-submit-bug-report +For bug reports, please first try to reproduce the bug with the latest +version of Org available---if you are running an outdated version, it +is quite possible that the bug has been fixed already. If the bug +persists, prepare a report and provide as much information as +possible, including the version information of Emacs (@kbd{M-x emacs-version}) and Org (@kbd{M-x org-version}), as well as +the Org related setup in the Emacs init file. The easiest way to do +this is to use the command + +@example +M-x org-submit-bug-report +@end example + + +@noindent +which puts all this information into an Emacs mail buffer so that you +only need to add your description. If you are not sending the Email +from within Emacs, please copy and paste the content into your Email +program. + +Sometimes you might face a problem due to an error in your Emacs or +Org mode setup. Before reporting a bug, it is very helpful to start +Emacs with minimal customizations and reproduce the problem. Doing so +often helps you determine if the problem is with your customization or +with Org mode itself. You can start a typical minimal session with +a command like the example below. + +@example +$ emacs -Q -l /path/to/minimal-org.el +@end example + + +However if you are using Org mode as distributed with Emacs, a minimal +setup is not necessary. In that case it is sufficient to start Emacs +as @samp{emacs -Q}. The @samp{minimal-org.el} setup file can have contents as +shown below. + +@lisp +;;; Minimal setup to load latest `org-mode'. + +;; Activate debugging. +(setq debug-on-error t + debug-on-signal nil + debug-on-quit nil) + +;; Add latest Org mode to load path. +(add-to-list 'load-path (expand-file-name "/path/to/org-mode/lisp")) +@end lisp + +If an error occurs, a ``backtrace'' can be very useful---see below on +how to create one. Often a small example file helps, along with clear +information about: + +@enumerate +@item +What exactly did you do? +@item +What did you expect to happen? +@item +What happened instead? +@end enumerate + +Thank you for helping to improve this program. + +@anchor{How to create a useful backtrace} +@subheading How to create a useful backtrace + +@cindex backtrace of an error +If working with Org produces an error with a message you do not +understand, you may have hit a bug. The best way to report this is by +providing, in addition to what was mentioned above, a backtrace. This +is information from the built-in debugger about where and how the +error occurred. Here is how to produce a useful backtrace: + +@enumerate +@item +Reload uncompiled versions of all Org mode Lisp files. The +backtrace contains much more information if it is produced with +uncompiled code. To do this, use + +@example +C-u M-x org-reload +@end example + + +@noindent +or, from the menu: Org @arrow{} Refresh/Reload @arrow{} Reload Org uncompiled. + +@item +Then, activate the debugger: + +@example +M-x toggle-debug-on-error +@end example + + +@noindent +or, from the menu: Options @arrow{} Enter Debugger on Error. + +@item +Do whatever you have to do to hit the error. Do not forget to +document the steps you take. + +@item +When you hit the error, a @samp{*Backtrace*} buffer appears on the +screen. Save this buffer to a file---for example using @kbd{C-x C-w}---and attach it to your bug report. +@end enumerate + +@node Conventions +@section Typesetting Conventions Used in this Manual + + + +@anchor{TODO keywords tags properties etc} +@subheading TODO keywords, tags, properties, etc. + +Org uses various syntactical elements: TODO keywords, tags, property +names, keywords, blocks, etc. In this manual we use the following +conventions: + +@table @asis +@item @samp{TODO} +@itemx @samp{WAITING} +TODO keywords are written with all capitals, even if they are +user-defined. + +@item @samp{boss} +@itemx @samp{ARCHIVE} +Tags are case-sensitive. User-defined tags are usually written in +lowercase; built-in tags with special meaning are written as they +should appear in the document, usually with all capitals. + +@item @samp{Release} +@itemx @samp{PRIORITY} +User-defined properties are capitalized; built-in properties with +special meaning are written with all capitals. + +@item @samp{TITLE} +@itemx @samp{BEGIN} @dots{} @samp{END} +Keywords and blocks are written in uppercase to enhance their +readability, but you can use lowercase in your Org files. +@end table + +@anchor{Key bindings and commands} +@subheading Key bindings and commands + +The manual lists both the keys and the corresponding commands for +accessing a functionality. Org mode often uses the same key for +different functions, depending on context. The command that is bound +to such keys has a generic name, like @code{org-metaright}. In the manual +we will, wherever possible, give the function that is internally +called by the generic command. For example, in the chapter on +document structure, @kbd{M-@key{RIGHT}} will be listed to call +@code{org-do-demote}, while in the chapter on tables, it will be listed to +call @code{org-table-move-column-right}. + +@node Document Structure +@chapter Document Structure + +@cindex document structure +@cindex structure of document +Org is an outliner. Outlines allow a document to be organized in +a hierarchical structure, which, least for me, is the best +representation of notes and thoughts. An overview of this structure +is achieved by folding, i.e., hiding large parts of the document to +show only the general document structure and the parts currently being +worked on. Org greatly simplifies the use of outlines by compressing +the entire show and hide functionalities into a single command, +@code{org-cycle}, which is bound to the @kbd{@key{TAB}} key. + +@menu +* Headlines:: How to typeset Org tree headlines. +* Visibility Cycling:: Show and hide, much simplified. +* Motion:: Jumping to other headlines. +* Structure Editing:: Changing sequence and level of headlines. +* Sparse Trees:: Matches embedded in context. +* Plain Lists:: Additional structure within an entry. +* Drawers:: Tucking stuff away. +* Blocks:: Folding blocks. +@end menu + +@node Headlines +@section Headlines + +@cindex headlines +@cindex outline tree +@vindex org-special-ctrl-a/e +@vindex org-special-ctrl-k +@vindex org-ctrl-k-protect-subtree + +Headlines define the structure of an outline tree. Org headlines +start on the left margin@footnote{See the variables @code{org-special-ctrl-a/e}, @code{org-special-ctrl-k}, +and @code{org-ctrl-k-protect-subtree} to configure special behavior of +@kbd{C-a}, @kbd{C-e}, and @kbd{C-k} in headlines. Note +also that clocking only works with headings indented less than 30 +stars.} with one or more stars followed by +a space. For example: + +@example +* Top level headline +** Second level +*** Third level + some text +*** Third level + more text +* Another top level headline +@end example + +@vindex org-footnote-section +The name defined in @code{org-footnote-section} is reserved. Do not use it +as a title for your own headings. + +Some people find the many stars too noisy and would prefer an outline +that has whitespace followed by a single star as headline starters. +This can be achieved using a Org Indent minor mode. See @ref{Clean View} for more information. + +Headlines are not numbered. However, you may want to dynamically +number some, or all, of them. See @ref{Dynamic Headline Numbering}. + +@vindex org-cycle-separator-lines +An empty line after the end of a subtree is considered part of it and +is hidden when the subtree is folded. However, if you leave at least +two empty lines, one empty line remains visible after folding the +subtree, in order to structure the collapsed view. See the variable +@code{org-cycle-separator-lines} to modify this behavior. + +@node Visibility Cycling +@section Visibility Cycling + +@cindex cycling, visibility +@cindex visibility cycling +@cindex trees, visibility +@cindex show hidden text +@cindex hide text + +@menu +* Global and local cycling:: Cycling through various visibility states. +* Initial visibility:: Setting the initial visibility state. +* Catching invisible edits:: Preventing mistakes when editing invisible parts. +@end menu + +@node Global and local cycling +@subsection Global and local cycling + +@cindex subtree visibility states +@cindex subtree cycling +@cindex folded, subtree visibility state +@cindex children, subtree visibility state +@cindex subtree, subtree visibility state + +Outlines make it possible to hide parts of the text in the buffer. +Org uses just two commands, bound to @kbd{@key{TAB}} and +@kbd{S-@key{TAB}} to change the visibility in the buffer. + +@table @asis +@item @kbd{@key{TAB}} (@code{org-cycle}) +@kindex TAB +@findex org-cycle +@emph{Subtree cycling}: Rotate current subtree among the states + +@example +,-> FOLDED -> CHILDREN -> SUBTREE --. +'-----------------------------------' +@end example + +@vindex org-cycle-emulate-tab +Point must be on a headline for this to work@footnote{See, however, the option @code{org-cycle-emulate-tab}.}. + +@item @kbd{S-@key{TAB}} (@code{org-global-cycle}) +@itemx @kbd{C-u @key{TAB}} +@cindex global visibility states +@cindex global cycling +@cindex overview, global visibility state +@cindex contents, global visibility state +@cindex show all, global visibility state +@kindex C-u TAB +@kindex S-TAB +@findex org-global-cycle +@emph{Global cycling}: Rotate the entire buffer among the states + +@example +,-> OVERVIEW -> CONTENTS -> SHOW ALL --. +'--------------------------------------' +@end example + +When @kbd{S-@key{TAB}} is called with a numeric prefix argument +@var{N}, view contents only up to headlines of level +@var{N}. + +Note that inside tables (see @ref{Tables}), @kbd{S-@key{TAB}} jumps to the +previous field instead. + +@vindex org-cycle-global-at-bob +You can run global cycling using @kbd{@key{TAB}} only if point is at +the very beginning of the buffer, but not on a headline, and +@code{org-cycle-global-at-bob} is set to a non-@code{nil} value. + +@item @kbd{C-u C-u @key{TAB}} (@code{org-set-startup-visibility}) +@cindex startup visibility +@kindex C-u C-u TAB +@findex org-set-startup-visibility +Switch back to the startup visibility of the buffer (see @ref{Initial visibility}). + +@item @kbd{C-u C-u C-u @key{TAB}} (@code{outline-show-all}) +@cindex show all, command +@kindex C-u C-u C-u TAB +@findex outline-show-all +Show all, including drawers. + +@item @kbd{C-c C-r} (@code{org-reveal}) +@cindex revealing context +@kindex C-c C-r +@findex org-reveal +Reveal context around point, showing the current entry, the +following heading and the hierarchy above. It is useful for working +near a location that has been exposed by a sparse tree command (see +@ref{Sparse Trees}) or an agenda command (see @ref{Agenda Commands}). With a prefix argument, show, on each level, all sibling +headings. With a double prefix argument, also show the entire +subtree of the parent. + +@item @kbd{C-c C-k} (@code{outline-show-branches}) +@cindex show branches, command +@kindex C-c C-k +@findex outline-show-branches +Expose all the headings of the subtree, but not their bodies. + +@item @kbd{C-c @key{TAB}} (@code{outline-show-children}) +@cindex show children, command +@kindex C-c TAB +@findex outline-show-children +Expose all direct children of the subtree. With a numeric prefix +argument @var{N}, expose all children down to level +@var{N}. + +@item @kbd{C-c C-x b} (@code{org-tree-to-indirect-buffer}) +@kindex C-c C-x b +@findex org-tree-to-indirect-buffer +Show the current subtree in an indirect buffer@footnote{The indirect buffer contains the entire buffer, but is narrowed +to the current tree. Editing the indirect buffer also changes the +original buffer, but without affecting visibility in that buffer. For +more information about indirect buffers, see @ref{Indirect Buffers,GNU Emacs Manual,,emacs,}.}. With +a numeric prefix argument @var{N}, go up to level @var{N} +and then take that tree. If @var{N} is negative then go up +that many levels. With a @kbd{C-u} prefix, do not remove the +previously used indirect buffer. + +@item @kbd{C-c C-x v} (@code{org-copy-visible}) +@kindex C-c C-x v +@findex org-copy-visible +Copy the @emph{visible} text in the region into the kill ring. +@end table + +@node Initial visibility +@subsection Initial visibility + +@vindex org-startup-folded +When Emacs first visits an Org file, the global state is set to +@code{showeverything}, i.e., all file content is visible@footnote{When @code{org-agenda-inhibit-startup} is non-@code{nil}, Org does not +honor the default visibility state when first opening a file for the +agenda (see @ref{Speeding Up Your Agendas}).}. This can +be configured through the variable @code{org-startup-folded}, or on +a per-file basis by adding one of the following lines anywhere in the +buffer: + +@cindex @samp{STARTUP}, keyword +@example +#+STARTUP: overview +#+STARTUP: content +#+STARTUP: showall +#+STARTUP: show2levels +#+STARTUP: show3levels +#+STARTUP: show4levels +#+STARTUP: show5levels +#+STARTUP: showeverything +@end example + +@cindex @samp{VISIBILITY}, property +Furthermore, any entries with a @samp{VISIBILITY} property (see @ref{Properties and Columns}) get their visibility adapted accordingly. Allowed values +for this property are @samp{folded}, @samp{children}, @samp{content}, and @samp{all}. + +@table @asis +@item @kbd{C-u C-u @key{TAB}} (@code{org-set-startup-visibility}) +@kindex C-u C-u TAB +@findex org-set-startup-visibility +Switch back to the startup visibility of the buffer, i.e., whatever +is requested by startup options and @samp{VISIBILITY} properties in +individual entries. +@end table + +@node Catching invisible edits +@subsection Catching invisible edits + +@cindex edits, catching invisible + +@vindex org-catch-invisible-edits +Sometimes you may inadvertently edit an invisible part of the buffer +and be confused on what has been edited and how to undo the mistake. +Setting @code{org-catch-invisible-edits} to non-@code{nil} helps preventing +this. See the docstring of this option on how Org should catch +invisible edits and process them. + +@node Motion +@section Motion + +@cindex motion, between headlines +@cindex jumping, to headlines +@cindex headline navigation + +The following commands jump to other headlines in the buffer. + +@table @asis +@item @kbd{C-c C-n} (@code{org-next-visible-heading}) +@kindex C-c C-n +@findex org-next-visible-heading +Next heading. + +@item @kbd{C-c C-p} (@code{org-previous-visible-heading}) +@kindex C-c C-p +@findex org-previous-visible-heading +Previous heading. + +@item @kbd{C-c C-f} (@code{org-forward-heading-same-level}) +@kindex C-c C-f +@findex org-forward-heading-same-level +Next heading same level. + +@item @kbd{C-c C-b} (@code{org-backward-heading-same-level}) +@kindex C-c C-b +@findex org-backward-heading-same-level +Previous heading same level. + +@item @kbd{C-c C-u} (@code{outline-up-heading}) +@kindex C-c C-u +@findex outline-up-heading +Backward to higher level heading. + +@item @kbd{C-c C-j} (@code{org-goto}) +@kindex C-c C-j +@findex org-goto +@vindex org-goto-auto-isearch +Jump to a different place without changing the current outline +visibility. Shows the document structure in a temporary buffer, +where you can use the following keys to find your destination: + +@multitable @columnfractions 0.3 0.7 +@item @kbd{@key{TAB}} +@tab Cycle visibility. +@item @kbd{@key{DOWN}} / @kbd{@key{UP}} +@tab Next/previous visible headline. +@item @kbd{@key{RET}} +@tab Select this location. +@item @kbd{/} +@tab Do a Sparse-tree search +@end multitable + +@noindent +The following keys work if you turn off @code{org-goto-auto-isearch} + +@multitable @columnfractions 0.3 0.7 +@item @kbd{n} / @kbd{p} +@tab Next/previous visible headline. +@item @kbd{f} / @kbd{b} +@tab Next/previous headline same level. +@item @kbd{u} +@tab One level up. +@item @kbd{0} @dots{} @kbd{9} +@tab Digit argument. +@item @kbd{q} +@tab Quit. +@end multitable + +@vindex org-goto-interface +@noindent +See also the variable @code{org-goto-interface}. +@end table + +@node Structure Editing +@section Structure Editing + +@cindex structure editing +@cindex headline, promotion and demotion +@cindex promotion, of subtrees +@cindex demotion, of subtrees +@cindex subtree, cut and paste +@cindex pasting, of subtrees +@cindex cutting, of subtrees +@cindex copying, of subtrees +@cindex sorting, of subtrees +@cindex subtrees, cut and paste + +@table @asis +@item @kbd{M-@key{RET}} (@code{org-meta-return}) +@kindex M-RET +@findex org-meta-return +@vindex org-M-RET-may-split-line +Insert a new heading, item or row. + +If the command is used at the @emph{beginning} of a line, and if there is +a heading or a plain list item (see @ref{Plain Lists}) at point, the new +heading/item is created @emph{before} the current line. When used at the +beginning of a regular line of text, turn that line into a heading. + +When this command is used in the middle of a line, the line is split +and the rest of the line becomes the new item or headline. If you +do not want the line to be split, customize +@code{org-M-RET-may-split-line}. + +Calling the command with a @kbd{C-u} prefix unconditionally +inserts a new heading at the end of the current subtree, thus +preserving its contents. With a double @kbd{C-u C-u} prefix, +the new heading is created at the end of the parent subtree instead. + +@item @kbd{C-@key{RET}} (@code{org-insert-heading-respect-content}) +@kindex C-RET +@findex org-insert-heading-respect-content +Insert a new heading at the end of the current subtree. + +@item @kbd{M-S-@key{RET}} (@code{org-insert-todo-heading}) +@kindex M-S-RET +@findex org-insert-todo-heading +@vindex org-treat-insert-todo-heading-as-state-change +Insert new TODO entry with same level as current heading. See also +the variable @code{org-treat-insert-todo-heading-as-state-change}. + +@item @kbd{C-S-@key{RET}} (@code{org-insert-todo-heading-respect-content}) +@kindex C-S-RET +@findex org-insert-todo-heading-respect-content +Insert new TODO entry with same level as current heading. Like +@kbd{C-@key{RET}}, the new headline is inserted after the current +subtree. + +@item @kbd{@key{TAB}} (@code{org-cycle}) +@kindex TAB +@findex org-cycle +In a new entry with no text yet, the first @kbd{@key{TAB}} demotes +the entry to become a child of the previous one. The next +@kbd{@key{TAB}} makes it a parent, and so on, all the way to top +level. Yet another @kbd{@key{TAB}}, and you are back to the initial +level. + +@item @kbd{M-@key{LEFT}} (@code{org-do-promote}) +@itemx @kbd{M-@key{RIGHT}} (@code{org-do-demote}) +@kindex M-LEFT +@findex org-do-promote +@kindex M-RIGHT +@findex org-do-demote +Promote or demote current heading by one level. + +@cindex region, active +@cindex active region +@cindex transient mark mode +When there is an active region---i.e., when Transient Mark mode is +active---promotion and demotion work on all headlines in the region. +To select a region of headlines, it is best to place both point and +mark at the beginning of a line, mark at the beginning of the first +headline, and point at the line just after the last headline to +change. + +@item @kbd{M-S-@key{LEFT}} (@code{org-promote-subtree}) +@kindex M-S-LEFT +@findex org-promote-subtree +Promote the current subtree by one level. + +@item @kbd{M-S-@key{RIGHT}} (@code{org-demote-subtree}) +@kindex M-S-RIGHT +@findex org-demote-subtree +Demote the current subtree by one level. + +@item @kbd{M-@key{UP}} (@code{org-move-subtree-up}) +@kindex M-UP +@findex org-move-subtree-up +Move subtree up, i.e., swap with previous subtree of same level. + +@item @kbd{M-@key{DOWN}} (@code{org-move-subtree-down}) +@kindex M-DOWN +@findex org-move-subtree-down +Move subtree down, i.e., swap with next subtree of same level. + +@item @kbd{C-c @@} (@code{org-mark-subtree}) +@kindex C-c @@ +@findex org-mark-subtree +Mark the subtree at point. Hitting repeatedly marks subsequent +subtrees of the same level as the marked subtree. + +@item @kbd{C-c C-x C-w} (@code{org-cut-subtree}) +@kindex C-c C-x C-w +@findex org-cut-subtree +Kill subtree, i.e., remove it from buffer but save in kill ring. +With a numeric prefix argument N, kill N sequential subtrees. + +@item @kbd{C-c C-x M-w} (@code{org-copy-subtree}) +@kindex C-c C-x M-w +@findex org-copy-subtree +Copy subtree to kill ring. With a numeric prefix argument N, copy +the N sequential subtrees. + +@item @kbd{C-c C-x C-y} (@code{org-paste-subtree}) +@kindex C-c C-x C-y +@findex org-paste-subtree +Yank subtree from kill ring. This does modify the level of the +subtree to make sure the tree fits in nicely at the yank position. +The yank level can also be specified with a numeric prefix argument, +or by yanking after a headline marker like @samp{****}. + +@item @kbd{C-y} (@code{org-yank}) +@kindex C-y +@findex org-yank +@vindex org-yank-adjusted-subtrees +@vindex org-yank-folded-subtrees +Depending on the variables @code{org-yank-adjusted-subtrees} and +@code{org-yank-folded-subtrees}, Org's internal @code{yank} command pastes +subtrees folded and in a clever way, using the same command as +@kbd{C-c C-x C-y}. With the default settings, no level +adjustment takes place, but the yanked tree is folded unless doing +so would swallow text previously visible. Any prefix argument to +this command forces a normal @code{yank} to be executed, with the prefix +passed along. A good way to force a normal yank is @kbd{C-u C-y}. If you use @code{yank-pop} after a yank, it yanks previous kill +items plainly, without adjustment and folding. + +@item @kbd{C-c C-x c} (@code{org-clone-subtree-with-time-shift}) +@kindex C-c C-x c +@findex org-clone-subtree-with-time-shift +Clone a subtree by making a number of sibling copies of it. You are +prompted for the number of copies to make, and you can also specify +if any timestamps in the entry should be shifted. This can be +useful, for example, to create a number of tasks related to a series +of lectures to prepare. For more details, see the docstring of the +command @code{org-clone-subtree-with-time-shift}. + +@item @kbd{C-c C-w} (@code{org-refile}) +@kindex C-c C-w +@findex org-refile +Refile entry or region to a different location. See @ref{Refile and Copy}. + +@item @kbd{C-c ^} (@code{org-sort}) +@kindex C-c ^ +@findex org-sort +Sort same-level entries. When there is an active region, all +entries in the region are sorted. Otherwise the children of the +current headline are sorted. The command prompts for the sorting +method, which can be alphabetically, numerically, by time---first +timestamp with active preferred, creation time, scheduled time, +deadline time---by priority, by TODO keyword---in the sequence the +keywords have been defined in the setup---or by the value of +a property. Reverse sorting is possible as well. You can also +supply your own function to extract the sorting key. With +a @kbd{C-u} prefix, sorting is case-sensitive. + +@item @kbd{C-x n s} (@code{org-narrow-to-subtree}) +@kindex C-x n s +@findex org-narrow-to-subtree +Narrow buffer to current subtree. + +@item @kbd{C-x n b} (@code{org-narrow-to-block}) +@kindex C-x n b +@findex org-narrow-to-block +Narrow buffer to current block. + +@item @kbd{C-x n w} (@code{widen}) +@kindex C-x n w +@findex widen +Widen buffer to remove narrowing. + +@item @kbd{C-c *} (@code{org-toggle-heading}) +@kindex C-c * +@findex org-toggle-heading +Turn a normal line or plain list item into a headline---so that it +becomes a subheading at its location. Also turn a headline into +a normal line by removing the stars. If there is an active region, +turn all lines in the region into headlines. If the first line in +the region was an item, turn only the item lines into headlines. +Finally, if the first line is a headline, remove the stars from all +headlines in the region. +@end table + +Note that when point is inside a table (see @ref{Tables}), the Meta-Cursor +keys have different functionality. + +@node Sparse Trees +@section Sparse Trees + +@cindex sparse trees +@cindex trees, sparse +@cindex folding, sparse trees +@cindex occur, command + +@vindex org-show-context-detail +An important feature of Org mode is the ability to construct @emph{sparse +trees} for selected information in an outline tree, so that the entire +document is folded as much as possible, but the selected information +is made visible along with the headline structure above it@footnote{See also the variable @code{org-show-context-detail} to decide how +much context is shown around each match.}. +Just try it out and you will see immediately how it works. + +Org mode contains several commands creating such trees, all these +commands can be accessed through a dispatcher: + +@table @asis +@item @kbd{C-c /} (@code{org-sparse-tree}) +@kindex C-c / +@findex org-sparse-tree +This prompts for an extra key to select a sparse-tree creating +command. + +@item @kbd{C-c / r} or @kbd{C-c / /} (@code{org-occur}) +@kindex C-c / r +@kindex C-c / / +@findex org-occur +@vindex org-remove-highlights-with-change +Prompts for a regexp (see @ref{Regular Expressions}) and shows a sparse +tree with all matches. If the match is in a headline, the headline +is made visible. If the match is in the body of an entry, headline +and body are made visible. In order to provide minimal context, +also the full hierarchy of headlines above the match is shown, as +well as the headline following the match. Each match is also +highlighted; the highlights disappear when the buffer is changed by +an editing command, or by pressing @kbd{C-c C-c}@footnote{This depends on the option @code{org-remove-highlights-with-change}.}. When +called with a @kbd{C-u} prefix argument, previous highlights +are kept, so several calls to this command can be stacked. + +@item @kbd{M-g n} or @kbd{M-g M-n} (@code{next-error}) +@kindex M-g n +@kindex M-g M-n +@findex next-error +Jump to the next sparse tree match in this buffer. + +@item @kbd{M-g p} or @kbd{M-g M-p} (@code{previous-error}) +@kindex M-g p +@kindex M-g M-p +@findex previous-error +Jump to the previous sparse tree match in this buffer. +@end table + +@vindex org-agenda-custom-commands +For frequently used sparse trees of specific search strings, you can +use the variable @code{org-agenda-custom-commands} to define fast keyboard +access to specific sparse trees. These commands will then be +accessible through the agenda dispatcher (see @ref{Agenda Dispatcher}). +For example: + +@lisp +(setq org-agenda-custom-commands + '(("f" occur-tree "FIXME"))) +@end lisp + +@noindent +defines the key @kbd{f} as a shortcut for creating a sparse tree +matching the string @samp{FIXME}. + +The other sparse tree commands select headings based on TODO keywords, +tags, or properties and are discussed later in this manual. + +@kindex C-c C-e C-v +@cindex printing sparse trees +@cindex visible text, printing +To print a sparse tree, you can use the Emacs command +@code{ps-print-buffer-with-faces} which does not print invisible parts of +the document. Or you can use the command @kbd{C-c C-e C-v} to +export only the visible part of the document and print the resulting +file. + +@node Plain Lists +@section Plain Lists + +@cindex plain lists +@cindex lists, plain +@cindex lists, ordered +@cindex ordered lists + +Within an entry of the outline tree, hand-formatted lists can provide +additional structure. They also provide a way to create lists of +checkboxes (see @ref{Checkboxes}). Org supports editing such lists, and +every exporter (see @ref{Exporting}) can parse and format them. + +Org knows ordered lists, unordered lists, and description lists. + +@itemize +@item +@emph{Unordered} list items start with @samp{-}, @samp{+}, or @samp{*}@footnote{When using @samp{*} as a bullet, lines must be indented so that they +are not interpreted as headlines. Also, when you are hiding leading +stars to get a clean outline view, plain list items starting with +a star may be hard to distinguish from true headlines. In short: even +though @samp{*} is supported, it may be better to not use it for plain list +items.} as bullets. + +@item +@vindex org-plain-list-ordered-item-terminator +@vindex org-alphabetical-lists +@emph{Ordered} list items start with a numeral followed by either +a period or a right parenthesis@footnote{You can filter out any of them by configuring +@code{org-plain-list-ordered-item-terminator}.}, such as @samp{1.} or @samp{1)}@footnote{You can also get @samp{a.}, @samp{A.}, @samp{a)} and @samp{A)} by configuring +@code{org-list-allow-alphabetical}. To minimize confusion with normal +text, those are limited to one character only. Beyond that limit, +bullets automatically become numbers.} +If you want a list to start with a different value---e.g., +20---start the text of the item with @samp{[@@20]}@footnote{If there's a checkbox in the item, the cookie must be put +@emph{before} the checkbox. If you have activated alphabetical lists, you +can also use counters like @samp{[@@b]}.}. Those +constructs can be used in any item of the list in order to enforce +a particular numbering. + +@item +@emph{Description} list items are unordered list items, and contain the +separator @samp{::} to distinguish the description @emph{term} from the +description. +@end itemize + +Items belonging to the same list must have the same indentation on the +first line. In particular, if an ordered list reaches number @samp{10.}, +then the 2-digit numbers must be written left-aligned with the other +numbers in the list. An item ends before the next line that is less +or equally indented than its bullet/number. + +A list ends whenever every item has ended, which means before any line +less or equally indented than items at top level. It also ends before +two blank lines. In that case, all items are closed. Here is an +example: + +@example +* Lord of the Rings +My favorite scenes are (in this order) +1. The attack of the Rohirrim +2. Eowyn's fight with the witch king + + this was already my favorite scene in the book + + I really like Miranda Otto. +3. Peter Jackson being shot by Legolas + - on DVD only + He makes a really funny face when it happens. +But in the end, no individual scenes matter but the film as a whole. +Important actors in this film are: +- Elijah Wood :: He plays Frodo +- Sean Astin :: He plays Sam, Frodo's friend. I still remember him + very well from his role as Mikey Walsh in /The Goonies/. +@end example + +Org supports these lists by tuning filling and wrapping commands to +deal with them correctly, and by exporting them properly (see +@ref{Exporting}). Since indentation is what governs the structure of these +lists, many structural constructs like @samp{#+BEGIN_} blocks can be +indented to signal that they belong to a particular item. + +@vindex org-list-demote-modify-bullet +@vindex org-list-indent-offset +If you find that using a different bullet for a sub-list---than that +used for the current list-level---improves readability, customize the +variable @code{org-list-demote-modify-bullet}. To get a greater difference +of indentation between items and theirs sub-items, customize +@code{org-list-indent-offset}. + +@vindex org-list-automatic-rules +The following commands act on items when point is in the first line of +an item---the line with the bullet or number. Some of them imply the +application of automatic rules to keep list structure intact. If some +of these actions get in your way, configure @code{org-list-automatic-rules} +to disable them individually. + +@table @asis +@item @kbd{@key{TAB}} (@code{org-cycle}) +@cindex cycling, in plain lists +@kindex TAB +@findex org-cycle +@vindex org-cycle-include-plain-lists +Items can be folded just like headline levels. Normally this works +only if point is on a plain list item. For more details, see the +variable @code{org-cycle-include-plain-lists}. If this variable is set +to @code{integrate}, plain list items are treated like low-level +headlines. The level of an item is then given by the indentation of +the bullet/number. Items are always subordinate to real headlines, +however; the hierarchies remain completely separated. In a new item +with no text yet, the first @kbd{@key{TAB}} demotes the item to +become a child of the previous one. Subsequent @kbd{@key{TAB}}s move +the item to meaningful levels in the list and eventually get it back +to its initial position. + +@item @kbd{M-@key{RET}} (@code{org-insert-heading}) +@kindex M-RET +@findex org-insert-heading +@vindex org-M-RET-may-split-line +Insert new item at current level. With a prefix argument, force +a new heading (see @ref{Structure Editing}). If this command is used in +the middle of an item, that item is @emph{split} in two, and the second +part becomes the new item@footnote{If you do not want the item to be split, customize the +variable @code{org-M-RET-may-split-line}.}. If this command is executed +@emph{before item's body}, the new item is created @emph{before} the current +one. + +@item @kbd{M-S-@key{RET}} +@kindex M-S-RET +Insert a new item with a checkbox (see @ref{Checkboxes}). + +@item @kbd{S-@key{UP}} +@itemx @kbd{S-@key{DOWN}} +@kindex S-UP +@kindex S-DOWN +@cindex shift-selection-mode +@vindex org-support-shift-select +@vindex org-list-use-circular-motion +Jump to the previous/next item in the current list, but only if +@code{org-support-shift-select} is off@footnote{If you want to cycle around items that way, you may customize +@code{org-list-use-circular-motion}.}. If not, you can still use +paragraph jumping commands like @kbd{C-@key{UP}} and +@kbd{C-@key{DOWN}} to quite similar effect. + +@item @kbd{M-@key{UP}} +@itemx @kbd{M-@key{DOWN}} +@kindex M-UP +@kindex M-DOWN +Move the item including subitems up/down@footnote{See @code{org-list-use-circular-motion} for a cyclic behavior.}, i.e., swap with +previous/next item of same indentation. If the list is ordered, +renumbering is automatic. + +@item @kbd{M-@key{LEFT}} +@itemx @kbd{M-@key{RIGHT}} +@kindex M-LEFT +@kindex M-RIGHT +Decrease/increase the indentation of an item, leaving children +alone. + +@item @kbd{M-S-@key{LEFT}} +@itemx @kbd{M-S-@key{RIGHT}} +@kindex M-S-LEFT +@kindex M-S-RIGHT +Decrease/increase the indentation of the item, including subitems. +Initially, the item tree is selected based on current indentation. +When these commands are executed several times in direct succession, +the initially selected region is used, even if the new indentation +would imply a different hierarchy. To use the new hierarchy, break +the command chain by moving point. + +As a special case, using this command on the very first item of +a list moves the whole list. This behavior can be disabled by +configuring @code{org-list-automatic-rules}. The global indentation of +a list has no influence on the text @emph{after} the list. + +@item @kbd{C-c C-c} +@kindex C-c C-c +If there is a checkbox (see @ref{Checkboxes}) in the item line, toggle +the state of the checkbox. In any case, verify bullets and +indentation consistency in the whole list. + +@item @kbd{C-c -} +@kindex C-c - +@vindex org-plain-list-ordered-item-terminator +Cycle the entire list level through the different itemize/enumerate +bullets (@samp{-}, @samp{+}, @samp{*}, @samp{1.}, @samp{1)}) or a subset of them, depending +on @code{org-plain-list-ordered-item-terminator}, the type of list, and +its indentation. With a numeric prefix argument N, select the Nth +bullet from this list. If there is an active region when calling +this, all lines are converted to list items. With a prefix +argument, the selected text is changed into a single item. If the +first line already was a list item, any item marker is removed from +the list. Finally, even without an active region, a normal line is +converted into a list item. + +@item @kbd{C-c *} +@kindex C-c * +Turn a plain list item into a headline---so that it becomes +a subheading at its location. See @ref{Structure Editing}, for +a detailed explanation. + +@item @kbd{C-c C-*} +@kindex C-c C-* +Turn the whole plain list into a subtree of the current heading. +Checkboxes (see @ref{Checkboxes}) become @samp{TODO}, respectively @samp{DONE}, +keywords when unchecked, respectively checked. + +@item @kbd{S-@key{LEFT}} +@itemx @kbd{S-@key{RIGHT}} +@vindex org-support-shift-select +@kindex S-LEFT +@kindex S-RIGHT +This command also cycles bullet styles when point is in on the +bullet or anywhere in an item line, details depending on +@code{org-support-shift-select}. + +@item @kbd{C-c ^} +@kindex C-c ^ +@cindex sorting, of plain list +Sort the plain list. Prompt for the sorting method: numerically, +alphabetically, by time, or by custom function. +@end table + +@node Drawers +@section Drawers + +@cindex drawers +@cindex visibility cycling, drawers + +Sometimes you want to keep information associated with an entry, but +you normally do not want to see it. For this, Org mode has @emph{drawers}. +They can contain anything but a headline and another drawer. Drawers +look like this: + +@example +** This is a headline +Still outside the drawer +:DRAWERNAME: +This is inside the drawer. +:END: +After the drawer. +@end example + +@kindex C-c C-x d +@findex org-insert-drawer +You can interactively insert a drawer at point by calling +@code{org-insert-drawer}, which is bound to @kbd{C-c C-x d}. With an +active region, this command puts the region inside the drawer. With +a prefix argument, this command calls @code{org-insert-property-drawer}, +which creates a @samp{PROPERTIES} drawer right below the current headline. +Org mode uses this special drawer for storing properties (see +@ref{Properties and Columns}). You cannot use it for anything else. + +Completion over drawer keywords is also possible using +@kbd{M-@key{TAB}}@footnote{Many desktops intercept @kbd{M-@key{TAB}} to switch windows. +Use @kbd{C-M-i} or @kbd{@key{ESC} @key{TAB}} instead.}. + +Visibility cycling (see @ref{Visibility Cycling}) on the headline hides and +shows the entry, but keep the drawer collapsed to a single line. In +order to look inside the drawer, you need to move point to the drawer +line and press @kbd{@key{TAB}} there. + +You can also arrange for state change notes (see @ref{Tracking TODO state changes}) and clock times (see @ref{Clocking Work Time}) to be stored in +a @samp{LOGBOOK} drawer. If you want to store a quick note there, in +a similar way to state changes, use + +@table @asis +@item @kbd{C-c C-z} +@kindex C-c C-z +Add a time-stamped note to the @samp{LOGBOOK} drawer. +@end table + +@node Blocks +@section Blocks + +@vindex org-hide-block-startup +@cindex blocks, folding + +Org mode uses @samp{#+BEGIN} @dots{} @samp{#+END} blocks for various purposes from +including source code examples (see @ref{Literal Examples}) to capturing +time logging information (see @ref{Clocking Work Time}). These blocks can +be folded and unfolded by pressing @kbd{@key{TAB}} in the @samp{#+BEGIN} +line. You can also get all blocks folded at startup by configuring +the variable @code{org-hide-block-startup} or on a per-file basis by using + +@cindex STARTUP, keyword +@example +#+STARTUP: hideblocks +#+STARTUP: nohideblocks +@end example + +@node Tables +@chapter Tables + +@cindex tables +@cindex editing tables + +Org comes with a fast and intuitive table editor. Spreadsheet-like +calculations are supported using the Emacs Calc package (see @ref{Top,GNU Emacs +Calculator Manual,,calc,}). + +@menu +* Built-in Table Editor:: Simple tables. +* Column Width and Alignment:: Overrule the automatic settings. +* Column Groups:: Grouping to trigger vertical lines. +* Orgtbl Mode:: The table editor as minor mode. +* The Spreadsheet:: The table editor has spreadsheet capabilities. +* Org Plot:: Plotting from Org tables. +@end menu + +@node Built-in Table Editor +@section Built-in Table Editor + +@cindex table editor, built-in + +@cindex header lines, in tables +@cindex horizontal rule, in tables +@cindex row separator, in tables +@cindex table syntax +Org makes it easy to format tables in plain ASCII@. Any line with @samp{|} +as the first non-whitespace character is considered part of a table. +@samp{|} is also the column separator@footnote{To insert a vertical bar into a table field, use @samp{\vert} or, +inside a word @samp{abc\vert@{@}def}.}. Moreover, a line starting +with @samp{|-} is a horizontal rule. It separates rows explicitly. Rows +before the first horizontal rule are header lines. A table might look +like this: + +@example +| Name | Phone | Age | +|-------+-------+-----| +| Peter | 1234 | 17 | +| Anna | 4321 | 25 | +@end example + +A table is re-aligned automatically each time you press +@kbd{@key{TAB}}, @kbd{@key{RET}} or @kbd{C-c C-c} inside the table. +@kbd{@key{TAB}} also moves to the next field---@kbd{@key{RET}} to the +next row---and creates new table rows at the end of the table or +before horizontal lines. The indentation of the table is set by the +first line. Horizontal rules are automatically expanded on every +re-align to span the whole table width. So, to create the above +table, you would only type + +@example +|Name|Phone|Age| +|- +@end example + +@noindent +and then press @kbd{@key{TAB}} to align the table and start filling in +fields. Even faster would be to type @samp{|Name|Phone|Age} followed by +@kbd{C-c @key{RET}}. + +When typing text into a field, Org treats @kbd{DEL}, +@kbd{Backspace}, and all character keys in a special way, so that +inserting and deleting avoids shifting other fields. Also, when +typing @emph{immediately} after point was moved into a new field with +@kbd{@key{TAB}}, @kbd{S-@key{TAB}} or @kbd{@key{RET}}, the field is +automatically made blank. If this behavior is too unpredictable for +you, configure the option @code{org-table-auto-blank-field}. + +@anchor{Creation and conversion} +@subheading Creation and conversion + +@table @asis +@item @kbd{C-c |} (@code{org-table-create-or-convert-from-region}) +@kindex C-c | +@findex org-table-create-or-convert-from-region +Convert the active region to table. If every line contains at least +one @kbd{@key{TAB}} character, the function assumes that the material +is tab separated. If every line contains a comma, comma-separated +values (CSV) are assumed. If not, lines are split at whitespace +into fields. You can use a prefix argument to force a specific +separator: @kbd{C-u} forces CSV, @kbd{C-u C-u} forces +@kbd{@key{TAB}}, @kbd{C-u C-u C-u} prompts for a regular +expression to match the separator, and a numeric argument +N indicates that at least N consecutive spaces, or alternatively +a @kbd{@key{TAB}} will be the separator. + +If there is no active region, this command creates an empty Org +table. But it is easier just to start typing, like @kbd{| N a m e | P h o n e | A g e @key{RET} | - @key{TAB}}. +@end table + +@anchor{Re-aligning and field motion} +@subheading Re-aligning and field motion + +@table @asis +@item @kbd{C-c C-c} (@code{org-table-align}) +@kindex C-c C-c +@findex org-table-align +Re-align the table without moving point. + +@item @kbd{@key{TAB}} (@code{org-table-next-field}) +@kindex TAB +@findex org-table-next-field +Re-align the table, move to the next field. Creates a new row if +necessary. + +@item @kbd{M-x org-table-blank-field} +@findex org-table-blank-field +Blank the field at point. + +@item @kbd{S-@key{TAB}} (@code{org-table-previous-field}) +@kindex S-TAB +@findex org-table-previous-field +Re-align, move to previous field. + +@item @kbd{@key{RET}} (@code{org-table-next-row}) +@kindex RET +@findex org-table-next-row +Re-align the table and move down to next row. Creates a new row if +necessary. At the beginning or end of a line, @kbd{@key{RET}} still +inserts a new line, so it can be used to split a table. + +@item @kbd{M-a} (@code{org-table-beginning-of-field}) +@kindex M-a +@findex org-table-beginning-of-field +Move to beginning of the current table field, or on to the previous +field. + +@item @kbd{M-e} (@code{org-table-end-of-field}) +@kindex M-e +@findex org-table-end-of-field +Move to end of the current table field, or on to the next field. +@end table + +@anchor{Column and row editing} +@subheading Column and row editing + +@table @asis +@item @kbd{M-@key{LEFT}} (@code{org-table-move-column-left}) +@kindex M-LEFT +@findex org-table-move-column-left +Move the current column left. + +@item @kbd{M-@key{RIGHT}} (@code{org-table-move-column-right}) +@kindex M-RIGHT +@findex org-table-move-column-right +Move the current column right. + +@item @kbd{M-S-@key{LEFT}} (@code{org-table-delete-column}) +@kindex M-S-LEFT +@findex org-table-delete-column +Kill the current column. + +@item @kbd{M-S-@key{RIGHT}} (@code{org-table-insert-column}) +@kindex M-S-RIGHT +@findex org-table-insert-column +Insert a new column at point position. Move the recent column and +all cells to the right of this column to the right. + +@item @kbd{M-@key{UP}} (@code{org-table-move-row-up}) +@kindex M-UP +@findex org-table-move-row-up +Move the current row up. + +@item @kbd{M-@key{DOWN}} (@code{org-table-move-row-down}) +@kindex M-DOWN +@findex org-table-move-row-down +Move the current row down. + +@item @kbd{M-S-@key{UP}} (@code{org-table-kill-row}) +@kindex M-S-UP +@findex org-table-kill-row +Kill the current row or horizontal line. + +@item @kbd{S-@key{UP}} (@code{org-table-move-cell-up}) +@kindex S-UP +@findex org-table-move-cell-up +Move cell up by swapping with adjacent cell. + +@item @kbd{S-@key{DOWN}} (@code{org-table-move-cell-down}) +@kindex S-DOWN +@findex org-table-move-cell-down +Move cell down by swapping with adjacent cell. + +@item @kbd{S-@key{LEFT}} (@code{org-table-move-cell-left}) +@kindex S-LEFT +@findex org-table-move-cell-left +Move cell left by swapping with adjacent cell. + +@item @kbd{S-@key{RIGHT}} (@code{org-table-move-cell-right}) +@kindex S-RIGHT +@findex org-table-move-cell-right +Move cell right by swapping with adjacent cell. + +@item @kbd{M-S-@key{DOWN}} (@code{org-table-insert-row}) +@kindex M-S-DOWN +@findex org-table-insert-row +Insert a new row above the current row. With a prefix argument, the +line is created below the current one. + +@item @kbd{C-c -} (@code{org-table-insert-hline}) +@kindex C-c - +@findex org-table-insert-hline +Insert a horizontal line below current row. With a prefix argument, +the line is created above the current line. + +@item @kbd{C-c @key{RET}} (@code{org-table-hline-and-move}) +@kindex C-c RET +@findex org-table-hline-and-move +Insert a horizontal line below current row, and move point into the +row below that line. + +@item @kbd{C-c ^} (@code{org-table-sort-lines}) +@kindex C-c ^ +@findex org-table-sort-lines +Sort the table lines in the region. The position of point indicates +the column to be used for sorting, and the range of lines is the +range between the nearest horizontal separator lines, or the entire +table. If point is before the first column, you are prompted for +the sorting column. If there is an active region, the mark +specifies the first line and the sorting column, while point should +be in the last line to be included into the sorting. The command +prompts for the sorting type, alphabetically, numerically, or by +time. You can sort in normal or reverse order. You can also supply +your own key extraction and comparison functions. When called with +a prefix argument, alphabetic sorting is case-sensitive. +@end table + +@anchor{Regions} +@subheading Regions + +@table @asis +@item @kbd{C-c C-x M-w} (@code{org-table-copy-region}) +@kindex C-c C-x M-w +@findex org-table-copy-region +Copy a rectangular region from a table to a special clipboard. +Point and mark determine edge fields of the rectangle. If there is +no active region, copy just the current field. The process ignores +horizontal separator lines. + +@item @kbd{C-c C-x C-w} (@code{org-table-cut-region}) +@kindex C-c C-x C-w +@findex org-table-cut-region +Copy a rectangular region from a table to a special clipboard, and +blank all fields in the rectangle. So this is the ``cut'' operation. + +@item @kbd{C-c C-x C-y} (@code{org-table-paste-rectangle}) +@kindex C-c C-x C-y +@findex org-table-paste-rectangle +Paste a rectangular region into a table. The upper left corner ends +up in the current field. All involved fields are overwritten. If +the rectangle does not fit into the present table, the table is +enlarged as needed. The process ignores horizontal separator lines. + +@item @kbd{M-@key{RET}} (@code{org-table-wrap-region}) +@kindex M-RET +@findex org-table-wrap-region +Split the current field at point position and move the rest to the +line below. If there is an active region, and both point and mark +are in the same column, the text in the column is wrapped to minimum +width for the given number of lines. A numeric prefix argument may +be used to change the number of desired lines. If there is no +region, but you specify a prefix argument, the current field is made +blank, and the content is appended to the field above. +@end table + +@anchor{Calculations} +@subheading Calculations + +@cindex formula, in tables +@cindex calculations, in tables + +@table @asis +@item @kbd{C-c +} (@code{org-table-sum}) +@kindex C-c + +@findex org-table-sum +Sum the numbers in the current column, or in the rectangle defined +by the active region. The result is shown in the echo area and can +be inserted with @kbd{C-y}. + +@item @kbd{S-@key{RET}} (@code{org-table-copy-down}) +@kindex S-RET +@findex org-table-copy-down +@vindex org-table-copy-increment +When current field is empty, copy from first non-empty field above. +When not empty, copy current field down to next row and move point +along with it. + +Depending on the variable @code{org-table-copy-increment}, integer and +time stamp field values, and fields prefixed or suffixed with +a whole number, can be incremented during copy. Also, a @code{0} prefix +argument temporarily disables the increment. + +This key is also used by shift-selection and related modes (see +@ref{Conflicts}). +@end table + +@anchor{Miscellaneous (1)} +@subheading Miscellaneous + +@table @asis +@item @kbd{C-c `} (@code{org-table-edit-field}) +@kindex C-c ` +@findex org-table-edit-field +Edit the current field in a separate window. This is useful for +fields that are not fully visible (see @ref{Column Width and Alignment}). +When called with a @kbd{C-u} prefix, just make the full field +visible, so that it can be edited in place. When called with two +@kbd{C-u} prefixes, make the editor window follow point through +the table and always show the current field. The follow mode exits +automatically when point leaves the table, or when you repeat this +command with @kbd{C-u C-u C-c `}. + +@item @kbd{M-x org-table-import} +@findex org-table-import +Import a file as a table. The table should be TAB or whitespace +separated. Use, for example, to import a spreadsheet table or data +from a database, because these programs generally can write +TAB-separated text files. This command works by inserting the file +into the buffer and then converting the region to a table. Any +prefix argument is passed on to the converter, which uses it to +determine the separator. + +@item @kbd{C-c |} (@code{org-table-create-or-convert-from-region}) +@kindex C-c | +@findex org-table-create-or-convert-from-region +Tables can also be imported by pasting tabular text into the Org +buffer, selecting the pasted text with @kbd{C-x C-x} and then +using the @kbd{C-c |} command (see @ref{Creation and conversion}). + +@item @kbd{M-x org-table-export} +@findex org-table-export +@vindex org-table-export-default-format +Export the table, by default as a TAB-separated file. Use for data +exchange with, for example, spreadsheet or database programs. The +format used to export the file can be configured in the variable +@code{org-table-export-default-format}. You may also use properties +@samp{TABLE_EXPORT_FILE} and @samp{TABLE_EXPORT_FORMAT} to specify the file +name and the format for table export in a subtree. Org supports +quite general formats for exported tables. The exporter format is +the same as the format used by Orgtbl radio tables, see @ref{Translator functions}, for a detailed description. + +@item @kbd{M-x org-table-header-line-mode} +@findex org-table-header-line-mode +@vindex org-table-header-line-p +Turn on the display of the first data row of the table at point in +the window header line when this first row is not visible anymore in +the buffer. You can activate this minor mode by default by setting +the option @code{org-table-header-line-p} to @code{t}. + +@item @kbd{M-x org-table-transpose-table-at-point} +@findex org-table-transpose-table-at-point +Transpose the table at point and eliminate hlines. +@end table + +@node Column Width and Alignment +@section Column Width and Alignment + +@cindex narrow columns in tables +@cindex alignment in tables + +The width of columns is automatically determined by the table editor. +The alignment of a column is determined automatically from the +fraction of number-like versus non-number fields in the column. + +@vindex org-table-automatic-realign +Editing a field may modify alignment of the table. Moving +a contiguous row or column---i.e., using @kbd{@key{TAB}} or +@kbd{@key{RET}}---automatically re-aligns it. If you want to disable +this behavior, set @code{org-table-automatic-realign} to @code{nil}. In any +case, you can always align manually a table: + +@table @asis +@item @kbd{C-c C-c} (@code{org-table-align}) +@kindex C-c C-c +@findex org-table-align +Align the current table. +@end table + +@vindex org-startup-align-all-tables +Setting the option @code{org-startup-align-all-tables} re-aligns all tables +in a file upon visiting it. You can also set this option on +a per-file basis with: + +@example +#+STARTUP: align +#+STARTUP: noalign +@end example + +Sometimes a single field or a few fields need to carry more text, +leading to inconveniently wide columns. Maybe you want to hide away +several columns or display them with a fixed width, regardless of +content, as shown in the following example. + +@example +|---+---------------------+--------| |---+-------…+…| +| | <6> | | | | <6> …|…| +| 1 | one | some | ----\ | 1 | one …|…| +| 2 | two | boring | ----/ | 2 | two …|…| +| 3 | This is a long text | column | | 3 | This i…|…| +|---+---------------------+--------| |---+-------…+…| +@end example + +To set the width of a column, one field anywhere in the column may +contain just the string @samp{} where @var{N} specifies the width +as a number of characters. You control displayed width of columns +with the following tools: + +@table @asis +@item @kbd{C-c @key{TAB}} (@code{org-table-toggle-column-width}) +@kindex C-c TAB +@findex org-table-toggle-column-width +Shrink or expand current column. + +If a width cookie specifies a width W for the column, shrinking it +displays the first W visible characters only. Otherwise, the column +is shrunk to a single character. + +When called before the first column or after the last one, ask for +a list of column ranges to operate on. + +@item @kbd{C-u C-c @key{TAB}} (@code{org-table-shrink}) +@kindex C-u C-c TAB +@findex org-table-shrink +Shrink all columns with a column width. Expand the others. + +@item @kbd{C-u C-u C-c @key{TAB}} (@code{org-table-expand}) +@kindex C-u C-u C-c TAB +@findex org-table-expand +Expand all columns. +@end table + +To see the full text of a shrunk field, hold the mouse over it: +a tool-tip window then shows the full contents of the field. +Alternatively, @kbd{C-h .} (@code{display-local-help}) reveals them, +too. For convenience, any change near the shrunk part of a column +expands it. + +@vindex org-startup-shrink-all-tables +Setting the option @code{org-startup-shrink-all-tables} shrinks all columns +containing a width cookie in a file the moment it is visited. You can +also set this option on a per-file basis with: + +@example +#+STARTUP: shrink +@end example + + +If you would like to overrule the automatic alignment of number-rich +columns to the right and of string-rich columns to the left, you can +use @samp{}, @samp{} or @samp{} in a similar fashion. You may also combine +alignment and field width like this: @samp{}. + +Lines which only contain these formatting cookies are removed +automatically upon exporting the document. + +@node Column Groups +@section Column Groups + +@cindex grouping columns in tables + +When Org exports tables, it does so by default without vertical lines +because that is visually more satisfying in general. Occasionally +however, vertical lines can be useful to structure a table into groups +of columns, much like horizontal lines can do for groups of rows. In +order to specify column groups, you can use a special row where the +first field contains only @samp{/}. The further fields can either contain +@samp{<} to indicate that this column should start a group, @samp{>} to indicate +the end of a column, or @samp{<>} (no space between @samp{<} and @samp{>}) to make +a column a group of its own. Upon export, boundaries between column +groups are marked with vertical lines. Here is an example: + +@example +| N | N^2 | N^3 | N^4 | sqrt(n) | sqrt[4](N) | +|---+-----+-----+-----+---------+------------| +| / | < | | > | < | > | +| 1 | 1 | 1 | 1 | 1 | 1 | +| 2 | 4 | 8 | 16 | 1.4142 | 1.1892 | +| 3 | 9 | 27 | 81 | 1.7321 | 1.3161 | +|---+-----+-----+-----+---------+------------| +#+TBLFM: $2=$1^2::$3=$1^3::$4=$1^4::$5=sqrt($1)::$6=sqrt(sqrt(($1))) +@end example + +It is also sufficient to just insert the column group starters after +every vertical line you would like to have: + +@example +| N | N^2 | N^3 | N^4 | sqrt(n) | sqrt[4](N) | +|---+-----+-----+-----+---------+------------| +| / | < | | | < | | +@end example + +@node Orgtbl Mode +@section The Orgtbl Minor Mode + +@cindex Orgtbl mode +@cindex minor mode for tables + +@findex orgtbl-mode +If you like the intuitive way the Org table editor works, you might +also want to use it in other modes like Text mode or Mail mode. The +minor mode Orgtbl mode makes this possible. You can always toggle the +mode with @kbd{M-x orgtbl-mode}. To turn it on by default, for +example in Message mode, use + +@lisp +(add-hook 'message-mode-hook #'turn-on-orgtbl) +@end lisp + +Furthermore, with some special setup, it is possible to maintain +tables in arbitrary syntax with Orgtbl mode. For example, it is +possible to construct @LaTeX{} tables with the underlying ease and power +of Orgtbl mode, including spreadsheet capabilities. For details, see +@ref{Tables in Arbitrary Syntax}. + +@node The Spreadsheet +@section The Spreadsheet + +@cindex calculations, in tables +@cindex spreadsheet capabilities +@cindex Calc package + +The table editor makes use of the Emacs Calc package to implement +spreadsheet-like capabilities. It can also evaluate Emacs Lisp forms +to derive fields from other fields. While fully featured, Org's +implementation is not identical to other spreadsheets. For example, +Org knows the concept of a @emph{column formula} that will be applied to +all non-header fields in a column without having to copy the formula +to each relevant field. There is also a formula debugger, and a +formula editor with features for highlighting fields in the table +corresponding to the references at point in the formula, moving these +references by arrow keys. + +@menu +* References:: How to refer to another field or range. +* Formula syntax for Calc:: Using Calc to compute stuff. +* Formula syntax for Lisp:: Writing formulas in Emacs Lisp. +* Durations and time values:: How to compute durations and time values. +* Field and range formulas:: Formula for specific (ranges of) fields. +* Column formulas:: Formulas valid for an entire column. +* Lookup functions:: Lookup functions for searching tables. +* Editing and debugging formulas:: Fixing formulas. +* Updating the table:: Recomputing all dependent fields. +* Advanced features:: Field and column names, automatic recalculation... +@end menu + +@node References +@subsection References + +@cindex references + +To compute fields in the table from other fields, formulas must +reference other fields or ranges. In Org, fields can be referenced by +name, by absolute coordinates, and by relative coordinates. To find +out what the coordinates of a field are, press @kbd{C-c ?} in +that field, or press @kbd{C-c @}} to toggle the display of a grid. + +@anchor{Field references} +@subsubheading Field references + +@cindex field references +@cindex references, to fields +Formulas can reference the value of another field in two ways. Like +in any other spreadsheet, you may reference fields with +a letter/number combination like @samp{B3}, meaning the second field in the +third row. However, Org prefers to use another, more general +representation that looks like this:@footnote{Org understands references typed by the user as @samp{B4}, but it +does not use this syntax when offering a formula for editing. You can +customize this behavior using the variable +@code{org-table-use-standard-references}.} + +@example +@@ROW$COLUMN +@end example + + +Column specifications can be absolute like @samp{$1}, @samp{$2}, @dots{}, @samp{$N}, or +relative to the current column, i.e., the column of the field which is +being computed, like @samp{$+1} or @samp{$-2}. @samp{$<} and @samp{$>} are immutable +references to the first and last column, respectively, and you can use +@samp{$>>>} to indicate the third column from the right. + +The row specification only counts data lines and ignores horizontal +separator lines, or ``hlines''. Like with columns, you can use absolute +row numbers @samp{@@1}, @samp{@@2}, @dots{}, @samp{@@N}, and row numbers relative to the +current row like @samp{@@+3} or @samp{@@-1}. @samp{@@<} and @samp{@@>} are immutable +references the first and last row in the table, respectively. You may +also specify the row relative to one of the hlines: @samp{@@I} refers to the +first hline, @samp{@@II} to the second, etc. @samp{@@-I} refers to the first such +line above the current line, @samp{@@+I} to the first such line below the +current line. You can also write @samp{@@III+2} which is the second data +line after the third hline in the table. + +@samp{@@0} and @samp{$0} refer to the current row and column, respectively, i.e., +to the row/column for the field being computed. Also, if you omit +either the column or the row part of the reference, the current +row/column is implied. + +Org's references with @emph{unsigned} numbers are fixed references in the +sense that if you use the same reference in the formula for two +different fields, the same field is referenced each time. Org's +references with @emph{signed} numbers are floating references because the +same reference operator can reference different fields depending on +the field being calculated by the formula. + +Here are a few examples: + +@multitable @columnfractions 0.2 0.8 +@item @samp{@@2$3} +@tab 2nd row, 3rd column (same as @samp{C2}) +@item @samp{$5} +@tab column 5 in the current row (same as @samp{E&}) +@item @samp{@@2} +@tab current column, row 2 +@item @samp{@@-1$-3} +@tab field one row up, three columns to the left +@item @samp{@@-I$2} +@tab field just under hline above current row, column 2 +@item @samp{@@>$5} +@tab field in the last row, in column 5 +@end multitable + +@anchor{Range references} +@subsubheading Range references + +@cindex range references +@cindex references, to ranges +You may reference a rectangular range of fields by specifying two +field references connected by two dots @samp{..}. The ends are included in +the range. If both fields are in the current row, you may simply use +@samp{$2..$7}, but if at least one field is in a different row, you need to +use the general @samp{@@ROW$COLUMN} format at least for the first field, +i.e., the reference must start with @samp{@@} in order to be interpreted +correctly. Examples: + +@multitable @columnfractions 0.2 0.8 +@item @samp{$1..$3} +@tab first three fields in the current row +@item @samp{$P..$Q} +@tab range, using column names (see @ref{Advanced features}) +@item @samp{$<<<..$>>} +@tab start in third column, continue to the last but one +@item @samp{@@2$1..@@4$3} +@tab nine fields between these two fields (same as @samp{A2..C4}) +@item @samp{@@-1$-2..@@-1} +@tab 3 fields in the row above, starting from 2 columns on the left +@item @samp{@@I..II} +@tab between first and second hline, short for @samp{@@I..@@II} +@end multitable + +@noindent +Range references return a vector of values that can be fed into Calc +vector functions. Empty fields in ranges are normally suppressed, so +that the vector contains only the non-empty fields. For other options +with the mode switches @samp{E}, @samp{N} and examples, see @ref{Formula syntax for Calc}. + +@anchor{Field coordinates in formulas} +@subsubheading Field coordinates in formulas + +@cindex field coordinates +@cindex coordinates, of field +@cindex row, of field coordinates +@cindex column, of field coordinates +@vindex org-table-current-column +@vindex org-table-current-dline +One of the very first actions during evaluation of Calc formulas and +Lisp formulas is to substitute @samp{@@#} and @samp{$#} in the formula with the +row or column number of the field where the current result will go to. +The traditional Lisp formula equivalents are @code{org-table-current-dline} +and @code{org-table-current-column}. Examples: + +@table @asis +@item @samp{if(@@# % 2, $#, string(""))} +Insert column number on odd rows, set field to empty on even rows. + +@item @samp{$2 = '(identity remote(FOO, @@@@#$1))} +Copy text or values of each row of column 1 of the table named +@var{FOO} into column 2 of the current table. + +@item @samp{@@3 = 2 * remote(FOO, @@1$$#)} +Insert the doubled value of each column of row 1 of the table +named @var{FOO} into row 3 of the current table. +@end table + +@noindent +For the second and third examples, table @var{FOO} must have at +least as many rows or columns as the current table. Note that this is +inefficient@footnote{The computation time scales as O(N^2) because table +@var{FOO} is parsed for each field to be copied.} for large number of rows. + +@anchor{Named references} +@subsubheading Named references + +@cindex named references +@cindex references, named +@cindex name, of column or field +@cindex constants, in calculations +@cindex @samp{CONSTANTS}, keyword +@vindex org-table-formula-constants + +@samp{$name} is interpreted as the name of a column, parameter or constant. +Constants are defined globally through the variable +@code{org-table-formula-constants}, and locally---for the file---through +a line like this example: + +@example +#+CONSTANTS: c=299792458. pi=3.14 eps=2.4e-6 +@end example + + +@vindex constants-unit-system +@pindex constants.el +Also, properties (see @ref{Properties and Columns}) can be used as +constants in table formulas: for a property @samp{Xyz} use the name +@samp{$PROP_Xyz}, and the property will be searched in the current outline +entry and in the hierarchy above it. If you have the @samp{constants.el} +package, it will also be used to resolve constants, including natural +constants like @samp{$h} for Planck's constant, and units like @samp{$km} for +kilometers@footnote{The file @samp{constants.el} can supply the values of constants in +two different unit systems, @samp{SI} and @samp{cgs}. Which one is used depends +on the value of the variable @code{constants-unit-system}. You can use the +@samp{STARTUP} options @samp{constSI} and @samp{constcgs} to set this value for the +current buffer.}. Column names and parameters can be specified in +special table lines. These are described below, see @ref{Advanced features}. All names must start with a letter, and further consist +of letters and numbers. + +@anchor{Remote references} +@subsubheading Remote references + +@cindex remote references +@cindex references, remote +@cindex references, to a different table +@cindex name, of column or field +@cindex @samp{NAME}, keyword +You may also reference constants, fields and ranges from a different +table, either in the current file or even in a different file. The +syntax is + +@example +remote(NAME,REF) +@end example + + +@noindent +where @var{NAME} can be the name of a table in the current file +as set by a @samp{#+NAME:} line before the table. It can also be the ID of +an entry, even in a different file, and the reference then refers to +the first table in that entry. @var{REF} is an absolute field or +range reference as described above for example @samp{@@3$3} or @samp{$somename}, +valid in the referenced table. + +@cindex table indirection +When @var{NAME} has the format @samp{@@ROW$COLUMN}, it is substituted +with the name or ID found in this field of the current table. For +example @samp{remote($1, @@@@>$2)} @result{} @samp{remote(year_2013, @@@@>$1)}. The format +@samp{B3} is not supported because it can not be distinguished from a plain +table name or ID@. + +@node Formula syntax for Calc +@subsection Formula syntax for Calc + +@cindex formula syntax, Calc +@cindex syntax, of formulas + +A formula can be any algebraic expression understood by the Emacs Calc +package. Note that Calc has the non-standard convention that @samp{/} has +lower precedence than @samp{*}, so that @samp{a/b*c} is interpreted as +@samp{(a/(b*c))}. Before evaluation by @code{calc-eval} (see @ref{Calling Calc from Your Programs,Calling Calc from +Your Lisp Programs,,calc,}), variable substitution takes place according to +the rules described above. + +@cindex vectors, in table calculations +The range vectors can be directly fed into the Calc vector functions +like @code{vmean} and @code{vsum}. + +@cindex format specifier, in spreadsheet +@cindex mode, for Calc +@vindex org-calc-default-modes +A formula can contain an optional mode string after a semicolon. This +string consists of flags to influence Calc and other modes during +execution. By default, Org uses the standard Calc modes (precision +12, angular units degrees, fraction and symbolic modes off). The +display format, however, has been changed to @samp{(float 8)} to keep +tables compact. The default settings can be configured using the +variable @code{org-calc-default-modes}. + +@table @asis +@item @samp{p20} +Set the internal Calc calculation precision to 20 digits. + +@item @samp{n3}, @samp{s3}, @samp{e2}, @samp{f4} +Normal, scientific, engineering or fixed format of the result of +Calc passed back to Org. Calc formatting is unlimited in precision +as long as the Calc calculation precision is greater. + +@item @samp{D}, @samp{R} +Degree and radian angle modes of Calc. + +@item @samp{F}, @samp{S} +Fraction and symbolic modes of Calc. + +@item @samp{u} +Units simplification mode of Calc. Calc is also a symbolic +calculator and is capable of working with values having a unit, +represented with numerals followed by a unit string in Org table +cells. This mode instructs Calc to simplify the units in the +computed expression before returning the result. + +@item @samp{T}, @samp{t}, @samp{U} +Duration computations in Calc or Lisp, @ref{Durations and time values}. + +@item @samp{E} +If and how to consider empty fields. Without @samp{E} empty fields in +range references are suppressed so that the Calc vector or Lisp list +contains only the non-empty fields. With @samp{E} the empty fields are +kept. For empty fields in ranges or empty field references the +value @samp{nan} (not a number) is used in Calc formulas and the empty +string is used for Lisp formulas. Add @samp{N} to use 0 instead for both +formula types. For the value of a field the mode @samp{N} has higher +precedence than @samp{E}. + +@item @samp{N} +Interpret all fields as numbers, use 0 for non-numbers. See the +next section to see how this is essential for computations with Lisp +formulas. In Calc formulas it is used only occasionally because +there number strings are already interpreted as numbers without @samp{N}. + +@item @samp{L} +Literal, for Lisp formulas only. See the next section. +@end table + +Unless you use large integer numbers or high-precision calculation and +display for floating point numbers you may alternatively provide +a @code{printf} format specifier to reformat the Calc result after it has +been passed back to Org instead of letting Calc already do the +formatting@footnote{The printf reformatting is limited in precision because the +value passed to it is converted into an ``integer'' or ``double''. The +``integer'' is limited in size by truncating the signed value to 32 +bits. The ``double'' is limited in precision to 64 bits overall which +leaves approximately 16 significant decimal digits.}. A few examples: + +@multitable {aaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{$1+$2} +@tab Sum of first and second field +@item @samp{$1+$2;%.2f} +@tab Same, format result to two decimals +@item @samp{exp($2)+exp($1)} +@tab Math functions can be used +@item @samp{$0;%.1f} +@tab Reformat current cell to 1 decimal +@item @samp{($3-32)*5/9} +@tab Degrees F @arrow{} C conversion +@item @samp{$c/$1/$cm} +@tab Hz @arrow{} cm conversion, using @samp{constants.el} +@item @samp{tan($1);Dp3s1} +@tab Compute in degrees, precision 3, display SCI 1 +@item @samp{sin($1);Dp3%.1e} +@tab Same, but use @code{printf} specifier for display +@item @samp{vmean($2..$7)} +@tab Compute column range mean, using vector function +@item @samp{vmean($2..$7);EN} +@tab Same, but treat empty fields as 0 +@item @samp{taylor($3,x=7,2)} +@tab Taylor series of $3, at x=7, second degree +@end multitable + +Calc also contains a complete set of logical operations (see @ref{Logical Operations,Logical +Operations,,calc,}). For example + +@table @asis +@item @samp{if($1 < 20, teen, string(""))} +@samp{"teen"} if age @samp{$1} is less than 20, else the Org table result +field is set to empty with the empty string. + +@item @samp{if("$1" =​= "nan" || "$2" =​= "nan", string(""), $1 + $2); E f-1} +Sum of the first two columns. When at least one of the input fields +is empty the Org table result field is set to empty. @samp{E} is +required to not convert empty fields to 0. @samp{f-1} is an optional +Calc format string similar to @samp{%.1f} but leaves empty results empty. + +@item @samp{if(typeof(vmean($1..$7)) =​= 12, string(""), vmean($1..$7); E} +Mean value of a range unless there is any empty field. Every field +in the range that is empty is replaced by @samp{nan} which lets @samp{vmean} +result in @samp{nan}. Then @samp{typeof =} 12= detects the @samp{nan} from @code{vmean} +and the Org table result field is set to empty. Use this when the +sample set is expected to never have missing values. + +@item @samp{if("$1..$7" =​= "[]", string(""), vmean($1..$7))} +Mean value of a range with empty fields skipped. Every field in the +range that is empty is skipped. When all fields in the range are +empty the mean value is not defined and the Org table result field +is set to empty. Use this when the sample set can have a variable +size. + +@item @samp{vmean($1..$7); EN} +To complete the example before: Mean value of a range with empty +fields counting as samples with value 0. Use this only when +incomplete sample sets should be padded with 0 to the full size. +@end table + +You can add your own Calc functions defined in Emacs Lisp with +@code{defmath} and use them in formula syntax for Calc. + +@node Formula syntax for Lisp +@subsection Emacs Lisp forms as formulas + +@cindex Lisp forms, as table formulas + +It is also possible to write a formula in Emacs Lisp. This can be +useful for string manipulation and control structures, if Calc's +functionality is not enough. + +A formula is evaluated as a Lisp form when it starts with a +single-quote followed by an opening parenthesis. Cell table +references are interpolated into the Lisp form before execution. The +evaluation should return either a string or a number. Evaluation +modes and a @code{printf} format used to render the returned values can be +specified after a semicolon. + +By default, references are interpolated as literal Lisp strings: the +field content is replaced in the Lisp form stripped of leading and +trailing white space and surrounded in double-quotes. For example: + +@example +'(concat $1 $2) +@end example + + +@noindent +concatenates the content of columns 1 and column 2. + +When the @samp{N} flag is used, all referenced elements are parsed as +numbers and interpolated as Lisp numbers, without quotes. Fields that +cannot be parsed as numbers are interpolated as zeros. For example: + +@example +'(+ $1 $2);N +@end example + + +@noindent +adds columns 1 and 2, equivalent to Calc's @samp{$1+$2}. Ranges are +inserted as space-separated fields, so they can be embedded in list or +vector syntax. For example: + +@example +'(apply '+ '($1..$4));N +@end example + + +@noindent +computes the sum of columns 1 to 4, like Calc's @samp{vsum($1..$4)}. + +When the @samp{L} flag is used, all fields are interpolated literally: the +cell content is replaced in the Lisp form stripped of leading and +trailing white space and without quotes. If a reference is intended +to be interpreted as a string by the Lisp form, the reference operator +itself should be enclosed in double-quotes, like @samp{"$3"}. The @samp{L} flag +is useful when strings and numbers are used in the same Lisp form. For +example: + +@example +'(substring "$1" $2 $3);L +@end example + + +@noindent +extracts the part of the string in column 1 between the character +positions specified in the integers in column 2 and 3 and it is easier +to read than the equivalent: + +@example +'(substring $1 (string-to-number $2) (string-to-number $3)) +@end example + +@node Durations and time values +@subsection Durations and time values + +@cindex duration, computing +@cindex time, computing +@vindex org-table-duration-custom-format + +If you want to compute time values use the @samp{T}, @samp{t}, or @samp{U} flag, +either in Calc formulas or Elisp formulas: + +@example +| Task 1 | Task 2 | Total | +|---------+----------+----------| +| 2:12 | 1:47 | 03:59:00 | +| 2:12 | 1:47 | 03:59 | +| 3:02:20 | -2:07:00 | 0.92 | +#+TBLFM: @@2$3=$1+$2;T::@@3$3=$1+$2;U::@@4$3=$1+$2;t +@end example + +Input duration values must be of the form @samp{HH:MM[:SS]}, where seconds +are optional. With the @samp{T} flag, computed durations are displayed as +@samp{HH:MM:SS} (see the first formula above). With the @samp{U} flag, seconds +are omitted so that the result is only @samp{HH:MM} (see second formula +above). Zero-padding of the hours field depends upon the value of the +variable @code{org-table-duration-hour-zero-padding}. + +With the @samp{t} flag, computed durations are displayed according to the +value of the option @code{org-table-duration-custom-format}, which defaults +to @code{hours} and displays the result as a fraction of hours (see the +third formula in the example above). + +Negative duration values can be manipulated as well, and integers are +considered as seconds in addition and subtraction. + +@node Field and range formulas +@subsection Field and range formulas + +@cindex field formula +@cindex range formula +@cindex formula, for individual table field +@cindex formula, for range of fields + +To assign a formula to a particular field, type it directly into the +field, preceded by @samp{:=}, for example @samp{vsum(@@II..III)}. When you press +@kbd{@key{TAB}} or @kbd{@key{RET}} or @kbd{C-c C-c} with point +still in the field, the formula is stored as the formula for this +field, evaluated, and the current field is replaced with the result. + +@cindex @samp{TBLFM}, keyword +Formulas are stored in a special @samp{TBLFM} keyword located directly +below the table. If you type the equation in the fourth field of the +third data line in the table, the formula looks like @samp{@@3$4=$1+$2}. +When inserting/deleting/swapping column and rows with the appropriate +commands, @emph{absolute references} (but not relative ones) in stored +formulas are modified in order to still reference the same field. To +avoid this from happening, in particular in range references, anchor +ranges at the table borders (using @samp{@@<}, @samp{@@>}, @samp{$<}, @samp{$>}), or at +hlines using the @samp{@@I} notation. Automatic adaptation of field +references does not happen if you edit the table structure with normal +editing commands---you must fix the formulas yourself. + +Instead of typing an equation into the field, you may also use the +following command + +@table @asis +@item @kbd{C-u C-c =} (@code{org-table-eval-formula}) +@kindex C-u C-c = +@findex org-table-eval-formula +Install a new formula for the current field. The command prompts +for a formula with default taken from the @samp{TBLFM} keyword, +applies it to the current field, and stores it. +@end table + +The left-hand side of a formula can also be a special expression in +order to assign the formula to a number of different fields. There is +no keyboard shortcut to enter such range formulas. To add them, use +the formula editor (see @ref{Editing and debugging formulas}) or edit +the @samp{TBLFM} keyword directly. + +@table @asis +@item @samp{$2=} +Column formula, valid for the entire column. This is so common that +Org treats these formulas in a special way, see @ref{Column formulas}. + +@item @samp{@@3=} +Row formula, applies to all fields in the specified row. @samp{@@>=} +means the last row. + +@item @samp{@@1$2..@@4$3=} +Range formula, applies to all fields in the given rectangular range. +This can also be used to assign a formula to some but not all fields +in a row. + +@item @samp{$NAME=} +Named field, see @ref{Advanced features}. +@end table + +@node Column formulas +@subsection Column formulas + +@cindex column formula +@cindex formula, for table column + +When you assign a formula to a simple column reference like @samp{$3=}, the +same formula is used in all fields of that column, with the following +very convenient exceptions: (i) If the table contains horizontal +separator hlines with rows above and below, everything before the +first such hline is considered part of the table @emph{header} and is not +modified by column formulas. Therefore a header is mandatory when you +use column formulas and want to add hlines to group rows, like for +example to separate a total row at the bottom from the summand rows +above. (ii) Fields that already get a value from a field/range +formula are left alone by column formulas. These conditions make +column formulas very easy to use. + +To assign a formula to a column, type it directly into any field in +the column, preceded by an equal sign, like @samp{=$1+$2}. When you press +@kbd{@key{TAB}} or @kbd{@key{RET}} or @kbd{C-c C-c} with point +still in the field, the formula is stored as the formula for the +current column, evaluated and the current field replaced with the +result. If the field contains only @samp{=}, the previously stored formula +for this column is used. For each column, Org only remembers the most +recently used formula. In the @samp{TBLFM} keyword, column formulas look +like @samp{$4=$1+$2}. The left-hand side of a column formula can not be +the name of column, it must be the numeric column reference or @samp{$>}. + +Instead of typing an equation into the field, you may also use the +following command: + +@table @asis +@item @kbd{C-c =} (@code{org-table-eval-formula}) +@kindex C-c = +@findex org-table-eval-formula +Install a new formula for the current column and replace current +field with the result of the formula. The command prompts for +a formula, with default taken from the @samp{TBLFM} keyword, applies it +to the current field and stores it. With a numeric prefix argument, +e.g., @kbd{C-5 C-c =}, the command applies it to that many +consecutive fields in the current column. +@end table + +@node Lookup functions +@subsection Lookup functions + +@cindex lookup functions in tables +@cindex table lookup functions + +Org has three predefined Emacs Lisp functions for lookups in tables. + +@table @asis +@item @samp{(org-lookup-first VAL S-LIST R-LIST &optional PREDICATE)} +@findex org-lookup-first +Searches for the first element @var{S} in list +@var{S-LIST} for which +@lisp +(PREDICATE VAL S) +@end lisp +is non-@code{nil}; returns the value from the corresponding position in +list @var{R-LIST}. The default @var{PREDICATE} is +@code{equal}. Note that the parameters @var{VAL} and @var{S} +are passed to @var{PREDICATE} in the same order as the +corresponding parameters are in the call to @code{org-lookup-first}, +where @var{VAL} precedes @var{S-LIST}. If +@var{R-LIST} is @code{nil}, the matching element @var{S} of +@var{S-LIST} is returned. + +@item @samp{(org-lookup-last VAL S-LIST R-LIST &optional PREDICATE)} +@findex org-lookup-last +Similar to @code{org-lookup-first} above, but searches for the @emph{last} +element for which @var{PREDICATE} is non-@code{nil}. + +@item @samp{(org-lookup-all VAL S-LIST R-LIST &optional PREDICATE)} +@findex org-lookup-all +Similar to @code{org-lookup-first}, but searches for @emph{all} elements for +which @var{PREDICATE} is non-@code{nil}, and returns @emph{all} +corresponding values. This function can not be used by itself in +a formula, because it returns a list of values. However, powerful +lookups can be built when this function is combined with other Emacs +Lisp functions. +@end table + +If the ranges used in these functions contain empty fields, the @samp{E} +mode for the formula should usually be specified: otherwise empty +fields are not included in @var{S-LIST} and/or @var{R-LIST} +which can, for example, result in an incorrect mapping from an element +of @var{S-LIST} to the corresponding element of +@var{R-LIST}. + +These three functions can be used to implement associative arrays, +count matching cells, rank results, group data, etc. For practical +examples see @uref{https://orgmode.org/worg/org-tutorials/org-lookups.html, this tutorial on Worg}. + +@node Editing and debugging formulas +@subsection Editing and debugging formulas + +@cindex formula editing +@cindex editing, of table formulas + +@vindex org-table-use-standard-references +You can edit individual formulas in the minibuffer or directly in the +field. Org can also prepare a special buffer with all active formulas +of a table. When offering a formula for editing, Org converts +references to the standard format (like @samp{B3} or @samp{D&}) if possible. If +you prefer to only work with the internal format (like @samp{@@3$2} or +@samp{$4}), configure the variable @code{org-table-use-standard-references}. + +@table @asis +@item @kbd{C-c =} or @kbd{C-u C-c =} (@code{org-table-eval-formula}) +@kindex C-c = +@kindex C-u C-c = +@findex org-table-eval-formula +Edit the formula associated with the current column/field in the +minibuffer. See @ref{Column formulas}, and @ref{Field and range formulas}. + +@item @kbd{C-u C-u C-c =} (@code{org-table-eval-formula}) +@kindex C-u C-u C-c = +@findex org-table-eval-formula +Re-insert the active formula (either a field formula, or a column +formula) into the current field, so that you can edit it directly in +the field. The advantage over editing in the minibuffer is that you +can use the command @kbd{C-c ?}. + +@item @kbd{C-c ?} (@code{org-table-field-info}) +@kindex C-c ? +@findex org-table-field-info +While editing a formula in a table field, highlight the field(s) +referenced by the reference at point position in the formula. + +@item @kbd{C-c @}} (@code{org-table-toggle-coordinate-overlays}) +@kindex C-c @} +@findex org-table-toggle-coordinate-overlays +Toggle the display of row and column numbers for a table, using +overlays. These are updated each time the table is aligned; you can +force it with @kbd{C-c C-c}. + +@item @kbd{C-c @{} (@code{org-table-toggle-formula-debugger}) +@kindex C-c @{ +@findex org-table-toggle-formula-debugger +Toggle the formula debugger on and off. See below. + +@item @kbd{C-c '} (@code{org-table-edit-formulas}) +@kindex C-c ' +@findex org-table-edit-formulas +Edit all formulas for the current table in a special buffer, where +the formulas are displayed one per line. If the current field has +an active formula, point in the formula editor marks it. While +inside the special buffer, Org automatically highlights any field or +range reference at point position. You may edit, remove and add +formulas, and use the following commands: + +@table @asis +@item @kbd{C-c C-c} or @kbd{C-x C-s} (@code{org-table-fedit-finish}) +@kindex C-x C-s +@kindex C-c C-c +@findex org-table-fedit-finish +Exit the formula editor and store the modified formulas. With +@kbd{C-u} prefix, also apply the new formulas to the +entire table. + +@item @kbd{C-c C-q} (@code{org-table-fedit-abort}) +@kindex C-c C-q +@findex org-table-fedit-abort +Exit the formula editor without installing changes. + +@item @kbd{C-c C-r} (@code{org-table-fedit-toggle-ref-type}) +@kindex C-c C-r +@findex org-table-fedit-toggle-ref-type +Toggle all references in the formula editor between standard (like +@samp{B3}) and internal (like @samp{@@3$2}). + +@item @kbd{@key{TAB}} (@code{org-table-fedit-lisp-indent}) +@kindex TAB +@findex org-table-fedit-lisp-indent +Pretty-print or indent Lisp formula at point. When in a line +containing a Lisp formula, format the formula according to Emacs +Lisp rules. Another @kbd{@key{TAB}} collapses the formula back +again. In the open formula, @kbd{@key{TAB}} re-indents just like +in Emacs Lisp mode. + +@item @kbd{M-@key{TAB}} (@code{lisp-complete-symbol}) +@kindex M-TAB +@findex lisp-complete-symbol +Complete Lisp symbols, just like in Emacs Lisp mode. + +@item @kbd{S-@key{UP}}, @kbd{S-@key{DOWN}}, @kbd{S-@key{LEFT}}, @kbd{S-@key{RIGHT}} +@kindex S-UP +@kindex S-DOWN +@kindex S-LEFT +@kindex S-RIGHT +@findex org-table-fedit-ref-up +@findex org-table-fedit-ref-down +@findex org-table-fedit-ref-left +@findex org-table-fedit-ref-right +Shift the reference at point. For example, if the reference is +@samp{B3} and you press @kbd{S-@key{RIGHT}}, it becomes @samp{C3}. This also +works for relative references and for hline references. + +@item @kbd{M-S-@key{UP}} (@code{org-table-fedit-line-up}) +@kindex M-S-UP +@findex org-table-fedit-line-up +Move the test line for column formulas up in the Org buffer. + +@item @kbd{M-S-@key{DOWN}} (@code{org-table-fedit-line-down}) +@kindex M-S-DOWN +@findex org-table-fedit-line-down +Move the test line for column formulas down in the Org buffer. + +@item @kbd{M-@key{UP}} (@code{org-table-fedit-scroll-up}) +@kindex M-UP +@findex org-table-fedit-scroll-up +Scroll up the window displaying the table. + +@item @kbd{M-@key{DOWN}} (@code{org-table-fedit-scroll-down}) +@kindex M-DOWN +@findex org-table-fedit-scroll-down +Scroll down the window displaying the table. + +@item @kbd{C-c @}} +@kindex C-c @} +@findex org-table-toggle-coordinate-overlays +Turn the coordinate grid in the table on and off. +@end table +@end table + +Making a table field blank does not remove the formula associated with +the field, because that is stored in a different line---the @samp{TBLFM} +keyword line. During the next recalculation, the field will be filled +again. To remove a formula from a field, you have to give an empty +reply when prompted for the formula, or to edit the @samp{TBLFM} keyword. + +@kindex C-c C-c +You may edit the @samp{TBLFM} keyword directly and re-apply the changed +equations with @kbd{C-c C-c} in that line or with the normal +recalculation commands in the table. + +@anchor{Using multiple @samp{TBLFM} lines} +@subsubheading Using multiple @samp{TBLFM} lines + +@cindex multiple formula lines +@cindex @samp{TBLFM} keywords, multiple +@cindex @samp{TBLFM}, switching + +@kindex C-c C-c +You may apply the formula temporarily. This is useful when you want +to switch the formula applied to the table. Place multiple @samp{TBLFM} +keywords right after the table, and then press @kbd{C-c C-c} on +the formula to apply. Here is an example: + +@example +| x | y | +|---+---| +| 1 | | +| 2 | | +#+TBLFM: $2=$1*1 +#+TBLFM: $2=$1*2 +@end example + +@noindent +Pressing @kbd{C-c C-c} in the line of @samp{#+TBLFM: $2=$1*2} yields: + +@example +| x | y | +|---+---| +| 1 | 2 | +| 2 | 4 | +#+TBLFM: $2=$1*1 +#+TBLFM: $2=$1*2 +@end example + +@noindent +If you recalculate this table, with @kbd{C-u C-c *}, for example, +you get the following result from applying only the first @samp{TBLFM} +keyword. + +@example +| x | y | +|---+---| +| 1 | 1 | +| 2 | 2 | +#+TBLFM: $2=$1*1 +#+TBLFM: $2=$1*2 +@end example + +@anchor{Debugging formulas} +@subsubheading Debugging formulas + +@cindex formula debugging +@cindex debugging, of table formulas + +When the evaluation of a formula leads to an error, the field content +becomes the string @samp{#ERROR}. If you would like to see what is going +on during variable substitution and calculation in order to find +a bug, turn on formula debugging in the Tbl menu and repeat the +calculation, for example by pressing @kbd{C-u C-u C-c = @key{RET}} in +a field. Detailed information are displayed. + +@node Updating the table +@subsection Updating the table + +@cindex recomputing table fields +@cindex updating, table + +Recalculation of a table is normally not automatic, but needs to be +triggered by a command. To make recalculation at least +semi-automatic, see @ref{Advanced features}. + +In order to recalculate a line of a table or the entire table, use the +following commands: + +@table @asis +@item @kbd{C-c *} (@code{org-table-recalculate}) +@kindex C-c * +@findex org-table-recalculate +Recalculate the current row by first applying the stored column +formulas from left to right, and all field/range formulas in the +current row. + +@item @kbd{C-u C-c *} or @kbd{C-u C-c C-c} +@kindex C-u C-c * +@kindex C-u C-c C-c +Recompute the entire table, line by line. Any lines before the +first hline are left alone, assuming that these are part of the +table header. + +@item @kbd{C-u C-u C-c *} or @kbd{C-u C-u C-c C-c} (@code{org-table-iterate}) +@kindex C-u C-u C-c * +@kindex C-u C-u C-c C-c +@findex org-table-iterate +Iterate the table by recomputing it until no further changes occur. +This may be necessary if some computed fields use the value of other +fields that are computed @emph{later} in the calculation sequence. + +@item @kbd{M-x org-table-recalculate-buffer-tables} +@findex org-table-recalculate-buffer-tables +Recompute all tables in the current buffer. + +@item @kbd{M-x org-table-iterate-buffer-tables} +@findex org-table-iterate-buffer-tables +Iterate all tables in the current buffer, in order to converge +table-to-table dependencies. +@end table + +@node Advanced features +@subsection Advanced features + +If you want the recalculation of fields to happen automatically, or if +you want to be able to assign @emph{names}@footnote{Such names must start with an alphabetic character and use +only alphanumeric/underscore characters.} to fields and columns, +you need to reserve the first column of the table for special marking +characters. + +@table @asis +@item @kbd{C-#} (@code{org-table-rotate-recalc-marks}) +@kindex C-# +@findex org-table-rotate-recalc-marks +Rotate the calculation mark in first column through the states @samp{#}, +@samp{*}, @samp{!}, @samp{$}. When there is an active region, change all marks in +the region. +@end table + +Here is an example of a table that collects exam results of students +and makes use of these features: + +@example +|---+---------+--------+--------+--------+-------+------| +| | Student | Prob 1 | Prob 2 | Prob 3 | Total | Note | +|---+---------+--------+--------+--------+-------+------| +| ! | | P1 | P2 | P3 | Tot | | +| # | Maximum | 10 | 15 | 25 | 50 | 10.0 | +| ^ | | m1 | m2 | m3 | mt | | +|---+---------+--------+--------+--------+-------+------| +| # | Peter | 10 | 8 | 23 | 41 | 8.2 | +| # | Sam | 2 | 4 | 3 | 9 | 1.8 | +|---+---------+--------+--------+--------+-------+------| +| | Average | | | | 25.0 | | +| ^ | | | | | at | | +| $ | max=50 | | | | | | +|---+---------+--------+--------+--------+-------+------| +#+TBLFM: $6=vsum($P1..$P3)::$7=10*$Tot/$max;%.1f::$at=vmean(@@-II..@@-I);%.1f +@end example + +@quotation Important +Please note that for these special tables, recalculating the table +with @kbd{C-u C-c *} only affects rows that are marked @samp{#} or +@samp{*}, and fields that have a formula assigned to the field itself. The +column formulas are not applied in rows with empty first field. + +@end quotation + +@cindex marking characters, tables +The marking characters have the following meaning: + +@table @asis +@item @samp{!} +The fields in this line define names for the columns, so that you +may refer to a column as @samp{$Tot} instead of @samp{$6}. + +@item @samp{^} +This row defines names for the fields @emph{above} the row. With such +a definition, any formula in the table may use @samp{$m1} to refer to the +value @samp{10}. Also, if you assign a formula to a names field, it is +stored as @samp{$name = ...}. + +@item @samp{_} +Similar to @samp{^}, but defines names for the fields in the row @emph{below}. + +@item @samp{$} +Fields in this row can define @emph{parameters} for formulas. For +example, if a field in a @samp{$} row contains @samp{max=50}, then formulas in +this table can refer to the value 50 using @samp{$max}. Parameters work +exactly like constants, only that they can be defined on a per-table +basis. + +@item @samp{#} +Fields in this row are automatically recalculated when pressing +@kbd{@key{TAB}} or @kbd{@key{RET}} or @kbd{S-@key{TAB}} in this row. +Also, this row is selected for a global recalculation with +@kbd{C-u C-c *}. Unmarked lines are left alone by this +command. + +@item @samp{*} +Selects this line for global recalculation with @kbd{C-u C-c *}, but not for automatic recalculation. Use this when automatic +recalculation slows down editing too much. + +@item @samp{/} +Do not export this line. Useful for lines that contain the +narrowing @samp{} markers or column group markers. +@end table + +Finally, just to whet your appetite for what can be done with the +fantastic Calc package, here is a table that computes the Taylor +series of degree n at location x for a couple of functions. + +@example +|---+-------------+---+-----+--------------------------------------| +| | Func | n | x | Result | +|---+-------------+---+-----+--------------------------------------| +| # | exp(x) | 1 | x | 1 + x | +| # | exp(x) | 2 | x | 1 + x + x^2 / 2 | +| # | exp(x) | 3 | x | 1 + x + x^2 / 2 + x^3 / 6 | +| # | x^2+sqrt(x) | 2 | x=0 | x*(0.5 / 0) + x^2 (2 - 0.25 / 0) / 2 | +| # | x^2+sqrt(x) | 2 | x=1 | 2 + 2.5 x - 2.5 + 0.875 (x - 1)^2 | +| * | tan(x) | 3 | x | 0.0175 x + 1.77e-6 x^3 | +|---+-------------+---+-----+--------------------------------------| +#+TBLFM: $5=taylor($2,$4,$3);n3 +@end example + +@node Org Plot +@section Org Plot + +@cindex graph, in tables +@cindex plot tables using Gnuplot + +Org Plot can produce graphs of information stored in Org tables, +either graphically or in ASCII art. + +@anchor{Graphical plots using Gnuplot} +@subheading Graphical plots using Gnuplot + +@cindex @samp{PLOT}, keyword +Org Plot can produce 2D and 3D graphs of information stored in Org +tables using @uref{https://www.gnuplot.info/, Gnuplot} and @uref{http://cars9.uchicago.edu/~ravel/software/gnuplot-mode.html, Gnuplot mode}. To see this in action, ensure +that you have both Gnuplot and Gnuplot mode installed on your system, +then call @kbd{C-c " g} or @kbd{M-x org-plot/gnuplot} on the +following table. + +@example +#+PLOT: title:"Citas" ind:1 deps:(3) type:2d with:histograms set:"yrange [0:]" +| Sede | Max cites | H-index | +|-----------+-----------+---------| +| Chile | 257.72 | 21.39 | +| Leeds | 165.77 | 19.68 | +| Sao Paolo | 71.00 | 11.50 | +| Stockholm | 134.19 | 14.33 | +| Morelia | 257.56 | 17.67 | +@end example + +Org Plot supports a range of plot types, and provides the ability to add more. +For example, a radar plot can be generated like so: +@example +#+PLOT: title:"An evaluation of plaintext document formats" transpose:yes type:radar min:0 max:4 +| Format | Fine-grained-control | Initial Effort | Syntax simplicity | Editor Support | Integrations | Ease-of-referencing | Versatility | +|-------------------+----------------------+----------------+-------------------+----------------+--------------+---------------------+-------------| +| Word | 2 | 4 | 4 | 2 | 3 | 2 | 2 | +| LaTeX | 4 | 1 | 1 | 3 | 2 | 4 | 3 | +| Org Mode | 4 | 2 | 3.5 | 1 | 4 | 4 | 4 | +| Markdown | 1 | 3 | 3 | 4 | 3 | 3 | 1 | +| Markdown + Pandoc | 2.5 | 2.5 | 2.5 | 3 | 3 | 3 | 2 | +@end example + +Notice that Org Plot is smart enough to apply the table's headers as +labels. Further control over the labels, type, content, and +appearance of plots can be exercised through the @samp{PLOT} keyword +preceding a table. See below for a complete list of Org Plot options. +For more information and examples see the @uref{https://orgmode.org/worg/org-tutorials/org-plot.html, Org Plot tutorial}. + +@anchor{Plot options} +@subsubheading Plot options + +@table @asis +@item @samp{set} +Specify any Gnuplot option to be set when graphing. + +@item @samp{title} +Specify the title of the plot. + +@item @samp{ind} +Specify which column of the table to use as the @samp{x} axis. + +@item @samp{deps} +Specify the columns to graph as a Lisp style list, surrounded by +parentheses and separated by spaces for example @samp{dep:(3 4)} to graph +the third and fourth columns. Defaults to graphing all other +columns aside from the @samp{ind} column. + +@item transpose +When @samp{y}, @samp{yes}, or @samp{t} attempt to transpose the table data before +plotting. Also recognises the shorthand option @samp{trans}. + +@item @samp{type} +Specify the type of the plot, by default one of @samp{2d}, @samp{3d}, @samp{radar}, or @samp{grid}. +Available types can be customised with @code{org-plot/preset-plot-types}. + +@item @samp{with} +Specify a @samp{with} option to be inserted for every column being +plotted, e.g., @samp{lines}, @samp{points}, @samp{boxes}, @samp{impulses}. Defaults to +@samp{lines}. + +@item @samp{file} +If you want to plot to a file, specify +@samp{"path/to/desired/output-file"}. + +@item @samp{labels} +List of labels to be used for the @samp{deps}. Defaults to the column +headers if they exist. + +@item @samp{line} +Specify an entire line to be inserted in the Gnuplot script. + +@item @samp{map} +When plotting @samp{3d} or @samp{grid} types, set this to @samp{t} to graph a flat +mapping rather than a @samp{3d} slope. + +@item min +Provides a minimum axis value that may be used by a plot type. +Implicitly assumes the @samp{y} axis is being referred to. Can +explicitly provide a value for a either the @samp{x} or @samp{y} axis with +@samp{xmin} and @samp{ymin}. + +@item max +Provides a maximum axis value that may be used by a plot type. +Implicitly assumes the @samp{y} axis is being referred to. Can +explicitly provide a value for a either the @samp{x} or @samp{y} axis with +@samp{xmax} and @samp{ymax}. + +@item ticks +Provides a desired number of axis ticks to display, that may be used +by a plot type. If none is given a plot type that requires ticks +will use @code{org--plot/sensible-tick-num} to try to determine a good +value. + +@item @samp{timefmt} +Specify format of Org mode timestamps as they will be parsed by +Gnuplot. Defaults to @samp{%Y-%m-%d-%H:%M:%S}. + +@item @samp{script} +If you want total control, you can specify a script file---place the +file name between double-quotes---which will be used to plot. +Before plotting, every instance of @samp{$datafile} in the specified +script will be replaced with the path to the generated data file. +Note: even if you set this option, you may still want to specify the +plot type, as that can impact the content of the data file. +@end table + +@anchor{ASCII bar plots} +@subheading ASCII bar plots + +While point is on a column, typing @kbd{C-c `` a} or @kbd{M-x orgtbl-ascii-plot} create a new column containing an ASCII-art bars +plot. The plot is implemented through a regular column formula. When +the source column changes, the bar plot may be updated by refreshing +the table, for example typing @kbd{C-u C-c *}. + +@example +| Sede | Max cites | | +|---------------+-----------+--------------| +| Chile | 257.72 | WWWWWWWWWWWW | +| Leeds | 165.77 | WWWWWWWh | +| Sao Paolo | 71.00 | WWW; | +| Stockholm | 134.19 | WWWWWW: | +| Morelia | 257.56 | WWWWWWWWWWWH | +| Rochefourchat | 0.00 | | +#+TBLFM: $3='(orgtbl-ascii-draw $2 0.0 257.72 12) +@end example + +The formula is an Elisp call. + +@defun orgtbl-ascii-draw value min max &optional width +Draw an ASCII bar in a table. + +@var{VALUE} is the value to plot. + +@var{MIN} is the value displayed as an empty bar. @var{MAX} +is the value filling all the @var{WIDTH}. Sources values outside +this range are displayed as @samp{too small} or @samp{too large}. + +@var{WIDTH} is the number of characters of the bar plot. It +defaults to @samp{12}. +@end defun + +@node Hyperlinks +@chapter Hyperlinks + +@cindex hyperlinks + +Like HTML, Org provides support for links inside a file, external +links to other files, Usenet articles, emails, and much more. + +@menu +* Link Format:: How links in Org are formatted. +* Internal Links:: Links to other places in the current file. +* Radio Targets:: Make targets trigger links in plain text. +* External Links:: URL-like links to the world. +* Handling Links:: Creating, inserting and following. +* Using Links Outside Org:: Linking from my C source code? +* Link Abbreviations:: Shortcuts for writing complex links. +* Search Options:: Linking to a specific location. +* Custom Searches:: When the default search is not enough. +@end menu + +@node Link Format +@section Link Format + +@cindex link format +@cindex format, of links + +@cindex angle bracket links +@cindex plain links +Org recognizes plain URIs, possibly wrapped within angle +brackets@footnote{Plain URIs are recognized only for a well-defined set of +schemes. See @ref{External Links}. Unlike URI syntax, they cannot contain +parenthesis or white spaces, either. URIs within angle brackets have +no such limitation.}, and activate them as clickable links. + +@cindex bracket links +The general link format, however, looks like this: + +@example +[[LINK][DESCRIPTION]] +@end example + + +@noindent +or alternatively + +@example +[[LINK]] +@end example + + +@cindex escape syntax, for links +@cindex backslashes, in links +Some @samp{\}, @samp{[} and @samp{]} characters in the @var{LINK} part need to +be ``escaped'', i.e., preceded by another @samp{\} character. More +specifically, the following characters, and only them, must be +escaped: + +@enumerate +@item +all @samp{[} and @samp{]} characters, +@item +every @samp{\} character preceding either @samp{]} or @samp{[}, +@item +every @samp{\} character at the end of the link. +@end enumerate + +@findex org-link-escape +Functions inserting links (see @ref{Handling Links}) properly escape +ambiguous characters. You only need to bother about the rules above +when inserting directly, or yanking, a URI within square brackets. +When in doubt, you may use the function @code{org-link-escape}, which turns +a link string into its escaped form. + +Once a link in the buffer is complete, with all brackets present, Org +changes the display so that @samp{DESCRIPTION} is displayed instead of +@samp{[[LINK][DESCRIPTION]]} and @samp{LINK} is displayed instead of @samp{[[LINK]]}. +Links are highlighted in the @code{org-link} face, which, by default, is an +underlined face. + +You can directly edit the visible part of a link. This can be either +the @var{LINK} part, if there is no description, or the +@var{DESCRIPTION} part otherwise. To also edit the invisible +@var{LINK} part, use @kbd{C-c C-l} with point on the link +(see @ref{Handling Links}). + +If you place point at the beginning or just behind the end of the +displayed text and press @kbd{@key{BS}}, you remove +the---invisible---bracket at that location@footnote{More accurately, the precise behavior depends on how point +arrived there---see @ref{Invisible Text,Invisible Text,,elisp,}.}. This makes the link +incomplete and the internals are again displayed as plain text. +Inserting the missing bracket hides the link internals again. To show +the internal structure of all links, use the menu: Org @arrow{} Hyperlinks @arrow{} +Literal links. + +@node Internal Links +@section Internal Links + +@cindex internal links +@cindex links, internal + +A link that does not look like a URL---i.e., does not start with +a known scheme or a file name---refers to the current document. You +can follow it with @kbd{C-c C-o} when point is on the link, or +with a mouse click (see @ref{Handling Links}). + +@cindex @samp{CUSTOM_ID}, property +Org provides several refinements to internal navigation within +a document. Most notably, a construct like @samp{[[#my-custom-id]]} +specifically targets the entry with the @samp{CUSTOM_ID} property set to +@samp{my-custom-id}. Also, an internal link looking like @samp{[[*Some +section]]} points to a headline with the name @samp{Some section}@footnote{To insert a link targeting a headline, in-buffer completion +can be used. Just type a star followed by a few optional letters into +the buffer and press @kbd{M-@key{TAB}}. All headlines in the current +buffer are offered as completions.}. + +@cindex targets, for links +When the link does not belong to any of the cases above, Org looks for +a @emph{dedicated target}: the same string in double angular brackets, like +@samp{<>}. + +@cindex @samp{NAME}, keyword +If no dedicated target exists, the link tries to match the exact name +of an element within the buffer. Naming is done, unsurprisingly, with +the @samp{NAME} keyword, which has to be put in the line before the element +it refers to, as in the following example + +@example +#+NAME: My Target +| a | table | +|----+------------| +| of | four cells | +@end example + +@vindex org-link-search-must-match-exact-headline +Ultimately, if none of the above succeeds, Org searches for a headline +that is exactly the link text but may also include a TODO keyword and +tags, or initiates a plain text search, according to the value of +@code{org-link-search-must-match-exact-headline}. + +Note that you must make sure custom IDs, dedicated targets, and names +are unique throughout the document. Org provides a linter to assist +you in the process, if needed. See @ref{Org Syntax}. + +During export, internal links are used to mark objects and assign them +a number. Marked objects are then referenced by links pointing to +them. In particular, links without a description appear as the number +assigned to the marked object@footnote{When targeting a @samp{NAME} keyword, the @samp{CAPTION} keyword is +mandatory in order to get proper numbering (see @ref{Captions}).}. In the following excerpt from +an Org buffer + +@example +1. one item +2. <>another item +Here we refer to item [[target]]. +@end example + +@noindent +The last sentence will appear as @samp{Here we refer to item 2} when +exported. + +In non-Org files, the search looks for the words in the link text. In +the above example the search would be for @samp{target}. + +Following a link pushes a mark onto Org's own mark ring. You can +return to the previous position with @kbd{C-c &}. Using this +command several times in direct succession goes back to positions +recorded earlier. + +@node Radio Targets +@section Radio Targets + +@cindex radio targets +@cindex targets, radio +@cindex links, radio targets + +Org can automatically turn any occurrences of certain target names in +normal text into a link. So without explicitly creating a link, the +text connects to the target radioing its position. Radio targets are +enclosed by triple angular brackets. For example, a target @samp{<<>>} causes each occurrence of @samp{my target} in normal text to +become activated as a link. The Org file is scanned automatically for +radio targets only when the file is first loaded into Emacs. To +update the target list during editing, press @kbd{C-c C-c} with +point on or at a target. + +@node External Links +@section External Links + +@cindex links, external +@cindex external links +@cindex attachment links +@cindex BBDB links +@cindex Elisp links +@cindex file links +@cindex Gnus links +@cindex Help links +@cindex IRC links +@cindex Info links +@cindex MH-E links +@cindex Rmail links +@cindex shell links +@cindex URL links +@cindex Usenet links + +Org supports links to files, websites, Usenet and email messages, BBDB +database entries and links to both IRC conversations and their logs. +External links are URL-like locators. They start with a short +identifying string followed by a colon. There can be no space after +the colon. + +Here is the full set of built-in link types: + +@table @asis +@item @samp{file} +File links. File name may be remote, absolute, or relative. + +Additionally, you can specify a line number, or a text search. +In Org files, you may link to a headline name, a custom ID, or a +code reference instead. + +As a special case, ``file'' prefix may be omitted if the file name +is complete, e.g., it starts with @samp{./}, or @samp{/}. + +@item @samp{attachment} +Same as file links but for files and folders attached to the current +node (see @ref{Attachments}). Attachment links are intended to behave +exactly as file links but for files relative to the attachment +directory. + +@item @samp{bbdb} +Link to a BBDB record, with possible regexp completion. + +@item @samp{docview} +Link to a document opened with DocView mode. You may specify a page +number. + +@item @samp{doi} +Link to an electronic resource, through its handle. + +@item @samp{elisp} +Execute an Elisp command upon activation. + +@item @samp{gnus}, @samp{rmail}, @samp{mhe} +Link to messages or folders from a given Emacs' MUA@. + +@item @samp{help} +Display documentation of a symbol in @samp{*Help*} buffer. + +@item @samp{http}, @samp{https} +Web links. + +@item @samp{id} +Link to a specific headline by its ID property, in an Org file. + +@item @samp{info} +Link to an Info manual, or to a specific node. + +@item @samp{irc} +Link to an IRC channel. + +@item @samp{mailto} +Link to message composition. + +@item @samp{news} +Usenet links. + +@item @samp{shell} +Execute a shell command upon activation. +@end table + +The following table illustrates the link types above, along with their +options: + +@multitable {aaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@headitem Link Type +@tab Example +@item http +@tab @samp{http://staff.science.uva.nl/c.dominik/} +@item https +@tab @samp{https://orgmode.org/} +@item doi +@tab @samp{doi:10.1000/182} +@item file +@tab @samp{file:/home/dominik/images/jupiter.jpg} +@item +@tab @samp{/home/dominik/images/jupiter.jpg} (same as above) +@item +@tab @samp{file:papers/last.pdf} +@item +@tab @samp{./papers/last.pdf} (same as above) +@item +@tab @samp{file:/ssh:me@@some.where:papers/last.pdf} (remote) +@item +@tab @samp{/ssh:me@@some.where:papers/last.pdf} (same as above) +@item +@tab @samp{file:sometextfile::NNN} (jump to line number) +@item +@tab @samp{file:projects.org} +@item +@tab @samp{file:projects.org::some words} (text search)@footnote{The actual behavior of the search depends on the value of the +variable @code{org-link-search-must-match-exact-headline}. If its value is +@code{nil}, then a fuzzy text search is done. If it is @code{t}, then only the +exact headline is matched, ignoring spaces and statistic cookies. If +the value is @code{query-to-create}, then an exact headline is searched; if +it is not found, then the user is queried to create it.} +@item +@tab @samp{file:projects.org::*task title} (headline search) +@item +@tab @samp{file:projects.org::#custom-id} (headline search) +@item attachment +@tab @samp{attachment:projects.org} +@item +@tab @samp{attachment:projects.org::some words} (text search) +@item docview +@tab @samp{docview:papers/last.pdf::NNN} +@item id +@tab @samp{id:B7423F4D-2E8A-471B-8810-C40F074717E9} +@item news +@tab @samp{news:comp.emacs} +@item mailto +@tab @samp{mailto:adent@@galaxy.net} +@item mhe +@tab @samp{mhe:folder} (folder link) +@item +@tab @samp{mhe:folder#id} (message link) +@item rmail +@tab @samp{rmail:folder} (folder link) +@item +@tab @samp{rmail:folder#id} (message link) +@item gnus +@tab @samp{gnus:group} (group link) +@item +@tab @samp{gnus:group#id} (article link) +@item bbdb +@tab @samp{bbdb:R.*Stallman} (record with regexp) +@item irc +@tab @samp{irc:/irc.com/#emacs/bob} +@item help +@tab @samp{help:org-store-link} +@item info +@tab @samp{info:org#External links} +@item shell +@tab @samp{shell:ls *.org} +@item elisp +@tab @samp{elisp:(find-file "Elisp.org")} (Elisp form to evaluate) +@item +@tab @samp{elisp:org-agenda} (interactive Elisp command) +@end multitable + +@cindex VM links +@cindex Wanderlust links +On top of these built-in link types, additional ones are available +through the @samp{org-contrib} repository (see @ref{Installation}). For +example, these links to VM or Wanderlust messages are available when +you load the corresponding libraries from the @samp{org-contrib} +repository: + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{vm:folder} +@tab VM folder link +@item @samp{vm:folder#id} +@tab VM message link +@item @samp{vm://myself@@some.where.org/folder#id} +@tab VM on remote machine +@item @samp{vm-imap:account:folder} +@tab VM IMAP folder link +@item @samp{vm-imap:account:folder#id} +@tab VM IMAP message link +@item @samp{wl:folder} +@tab Wanderlust folder link +@item @samp{wl:folder#id} +@tab Wanderlust message link +@end multitable + +For information on customizing Org to add new link types, see @ref{Adding Hyperlink Types}. + +A link should be enclosed in double brackets and may contain +descriptive text to be displayed instead of the URL (see @ref{Link Format}), for example: + +@example +[[https://www.gnu.org/software/emacs/][GNU Emacs]] +@end example + + +If the description is a file name or URL that points to an image, HTML +export (see @ref{HTML Export}) inlines the image as a clickable button. If +there is no description at all and the link points to an image, that +image is inlined into the exported HTML file. + +@cindex square brackets, around links +@cindex angular brackets, around links +@cindex plain text external links +Org also recognizes external links amid normal text and activates them +as links. If spaces must be part of the link (for example in +@samp{bbdb:R.*Stallman}), or if you need to remove ambiguities about the +end of the link, enclose the link in square or angular brackets. + +@node Handling Links +@section Handling Links + +@cindex links, handling + +Org provides methods to create a link in the correct syntax, to insert +it into an Org file, and to follow the link. + +@findex org-store-link +@cindex storing links +The main function is @code{org-store-link}, called with @kbd{M-x org-store-link}. Because of its importance, we suggest to bind it +to a widely available key (see @ref{Activation}). It stores a link to the +current location. The link is stored for later insertion into an Org +buffer---see below. The kind of link that is created depends on the +current buffer: + +@table @asis +@item @emph{Org mode buffers} +For Org files, if there is a @samp{<>} at point, the link points +to the target. Otherwise it points to the current headline, which +is also the description@footnote{If the headline contains a timestamp, it is removed from the +link, which results in a wrong link---you should avoid putting +a timestamp in the headline.}. + +@vindex org-id-link-to-org-use-id +@cindex @samp{CUSTOM_ID}, property +@cindex @samp{ID}, property +If the headline has a @samp{CUSTOM_ID} property, store a link to this +custom ID@. In addition or alternatively, depending on the value of +@code{org-id-link-to-org-use-id}, create and/or use a globally unique +@samp{ID} property for the link@footnote{The Org Id library must first be loaded, either through +@code{org-customize}, by enabling @code{id} in @code{org-modules}, or by adding +@samp{(require 'org-id)} in your Emacs init file.}. So using this command in Org +buffers potentially creates two links: a human-readable link from +the custom ID, and one that is globally unique and works even if the +entry is moved from file to file. The @samp{ID} property can be either a +UUID (default) or a timestamp, depending on @code{org-id-method}. Later, +when inserting the link, you need to decide which one to use. + +@item @emph{Email/News clients: VM, Rmail, Wanderlust, MH-E, Gnus} +@vindex org-link-email-description-format +Pretty much all Emacs mail clients are supported. The link points +to the current article, or, in some Gnus buffers, to the group. The +description is constructed according to the variable +@code{org-link-email-description-format}. By default, it refers to the +addressee and the subject. + +@item @emph{Web browsers: W3, W3M and EWW} +Here the link is the current URL, with the page title as the +description. + +@item @emph{Contacts: BBDB} +Links created in a BBDB buffer point to the current entry. + +@item @emph{Chat: IRC} +@vindex org-irc-links-to-logs +For IRC links, if the variable @code{org-irc-link-to-logs} is non-@code{nil}, +create a @samp{file} style link to the relevant point in the logs for the +current conversation. Otherwise store an @samp{irc} style link to the +user/channel/server under the point. + +@item @emph{Other files} +For any other file, the link points to the file, with a search +string (see @ref{Search Options}) pointing to the contents +of the current line. If there is an active region, the selected +words form the basis of the search string. You can write custom Lisp +functions to select the search string and perform the search for +particular file types (see @ref{Custom Searches}). + +You can also define dedicated links to other files. See @ref{Adding Hyperlink Types}. + +@item @emph{Agenda view} +When point is in an agenda view, the created link points to the +entry referenced by the current line. +@end table + +From an Org buffer, the following commands create, navigate or, more +generally, act on links. + +@table @asis +@item @kbd{C-c C-l} (@code{org-insert-link}) +@kindex C-c C-l +@findex org-insert-link +@cindex link completion +@cindex completion, of links +@cindex inserting links +@vindex org-link-keep-stored-after-insertion +Insert a link@footnote{Note that you do not have to use this command to insert +a link. Links in Org are plain text, and you can type or paste them +straight into the buffer. By using this command, the links are +automatically enclosed in double brackets, and you will be asked for +the optional descriptive text.}. This prompts for a link to be inserted into +the buffer. You can just type a link, using text for an internal +link, or one of the link type prefixes mentioned in the examples +above. The link is inserted into the buffer, along with +a descriptive text@footnote{After insertion of a stored link, the link will be removed +from the list of stored links. To keep it in the list for later use, +use a triple @kbd{C-u} prefix argument to @kbd{C-c C-l}, or +configure the option @code{org-link-keep-stored-after-insertion}.}. If some text was selected at this time, +it becomes the default description. + +@table @asis +@item @emph{Inserting stored links} +All links stored during the current session are part of the +history for this prompt, so you can access them with @kbd{@key{UP}} +and @kbd{@key{DOWN}} (or @kbd{M-p}, @kbd{M-n}). + +@item @emph{Completion support} +Completion with @kbd{@key{TAB}} helps you to insert valid link +prefixes like @samp{http} or @samp{ftp}, including the prefixes defined +through link abbreviations (see @ref{Link Abbreviations}). If you +press @kbd{@key{RET}} after inserting only the prefix, Org offers +specific completion support for some link types@footnote{This works if a function has been defined in the @code{:complete} +property of a link in @code{org-link-parameters}.}. For +example, if you type @kbd{f i l e @key{RET}}---alternative access: +@kbd{C-u C-c C-l}, see below---Org offers file name +completion, and after @kbd{b b d b @key{RET}} you can complete +contact names. +@end table + +@item @kbd{C-u C-c C-l} +@cindex file name completion +@cindex completion, of file names +@kindex C-u C-c C-l +When @kbd{C-c C-l} is called with a @kbd{C-u} prefix +argument, insert a link to a file. You may use file name completion +to select the name of the file. The path to the file is inserted +relative to the directory of the current Org file, if the linked +file is in the current directory or in a sub-directory of it, or if +the path is written relative to the current directory using @samp{../}. +Otherwise an absolute path is used, if possible with @samp{~/} for your +home directory. You can force an absolute path with two +@kbd{C-u} prefixes. + +@item @kbd{C-c C-l} (with point on existing link) +@cindex following links +When point is on an existing link, @kbd{C-c C-l} allows you to +edit the link and description parts of the link. + +@item @kbd{C-c C-o} (@code{org-open-at-point}) +@kindex C-c C-o +@findex org-open-at-point +@vindex org-file-apps +Open link at point. This launches a web browser for URL (using +@code{browse-url-at-point}), run VM/MH-E/Wanderlust/Rmail/Gnus/BBDB for +the corresponding links, and execute the command in a shell link. +When point is on an internal link, this command runs the +corresponding search. When point is on the tags part of a headline, +it creates the corresponding tags view (see @ref{Matching tags and properties}). If point is on a timestamp, it compiles the agenda for +that date. Furthermore, it visits text and remote files in @samp{file} +links with Emacs and select a suitable application for local +non-text files. Classification of files is based on file extension +only. See option @code{org-file-apps}. If you want to override the +default application and visit the file with Emacs, use +a @kbd{C-u} prefix. If you want to avoid opening in Emacs, use +a @kbd{C-u C-u} prefix. + +@vindex org-link-frame-setup +If point is on a headline, but not on a link, offer all links in the +headline and entry text. If you want to setup the frame +configuration for following links, customize @code{org-link-frame-setup}. + +@item @kbd{@key{RET}} +@vindex org-return-follows-link +@kindex RET +When @code{org-return-follows-link} is set, @kbd{@key{RET}} also follows +the link at point. + +@item @kbd{mouse-2} or @kbd{mouse-1} +@kindex mouse-2 +@kindex mouse-1 +On links, @kbd{mouse-1} and @kbd{mouse-2} opens the link +just as @kbd{C-c C-o} does. + +@item @kbd{mouse-3} +@vindex org-link-use-indirect-buffer-for-internals +@kindex mouse-3 +Like @kbd{mouse-2}, but force file links to be opened with +Emacs, and internal links to be displayed in another window@footnote{See the variable @code{org-link-use-indirect-buffer-for-internals}.}. + +@item @kbd{C-c %} (@code{org-mark-ring-push}) +@kindex C-c % +@findex org-mark-ring-push +@cindex mark ring +Push the current position onto the Org mark ring, to be able to +return easily. Commands following an internal link do this +automatically. + +@item @kbd{C-c &} (@code{org-mark-ring-goto}) +@kindex C-c & +@findex org-mark-ring-goto +@cindex links, returning to +Jump back to a recorded position. A position is recorded by the +commands following internal links, and by @kbd{C-c %}. Using +this command several times in direct succession moves through a ring +of previously recorded positions. + +@item @kbd{C-c C-x C-n} (@code{org-next-link}) +@itemx @kbd{C-c C-x C-p} (@code{org-previous-link}) +@kindex C-c C-x C-p +@findex org-previous-link +@kindex C-c C-x C-n +@findex org-next-link +@cindex links, finding next/previous +Move forward/backward to the next link in the buffer. At the limit +of the buffer, the search fails once, and then wraps around. The +key bindings for this are really too long; you might want to bind +this also to @kbd{M-n} and @kbd{M-p}. + +@lisp +(with-eval-after-load 'org + (define-key org-mode-map (kbd "M-n") #'org-next-link) + (define-key org-mode-map (kbd "M-p") #'org-previous-link)) +@end lisp +@end table + +@node Using Links Outside Org +@section Using Links Outside Org + +@findex org-insert-link-global +@findex org-open-at-point-global +You can insert and follow links that have Org syntax not only in Org, +but in any Emacs buffer. For this, Org provides two functions: +@code{org-insert-link-global} and @code{org-open-at-point-global}. + +You might want to bind them to globally available keys. See +@ref{Activation} for some advice. + +@node Link Abbreviations +@section Link Abbreviations + +@cindex link abbreviations +@cindex abbreviation, links + +Long URL can be cumbersome to type, and often many similar links are +needed in a document. For this you can use link abbreviations. An +abbreviated link looks like this + +@example +[[linkword:tag][description]] +@end example + + +@noindent +@vindex org-link-abbrev-alist +where the tag is optional. The @emph{linkword} must be a word, starting +with a letter, followed by letters, numbers, @samp{-}, and @samp{_}. +Abbreviations are resolved according to the information in the +variable @code{org-link-abbrev-alist} that relates the linkwords to +replacement text. Here is an example: + +@lisp +(setq org-link-abbrev-alist + '(("bugzilla" . "http://10.1.2.9/bugzilla/show_bug.cgi?id=") + ("Nu Html Checker" . "https://validator.w3.org/nu/?doc=%h") + ("duckduckgo" . "https://duckduckgo.com/?q=%s") + ("omap" . "http://nominatim.openstreetmap.org/search?q=%s&polygon=1") + ("ads" . "https://ui.adsabs.harvard.edu/search/q=%20author%3A\"%s\""))) +@end lisp + +If the replacement text contains the string @samp{%s}, it is replaced with +the tag. Using @samp{%h} instead of @samp{%s} percent-encodes the tag (see the +example above, where we need to encode the URL parameter). Using +@samp{%(my-function)} passes the tag to a custom Lisp function, and replace +it by the resulting string. + +If the replacement text do not contain any specifier, it is simply +appended to the string in order to create the link. + +Instead of a string, you may also specify a Lisp function to create +the link. Such a function will be called with the tag as the only +argument. + +With the above setting, you could link to a specific bug with +@samp{[[bugzilla:129]]}, search the web for @samp{OrgMode} with @samp{[[duckduckgo:OrgMode]]}, +show the map location of the Free Software Foundation @samp{[[gmap:51 +Franklin Street, Boston]]} or of Carsten office @samp{[[omap:Science Park 904, +Amsterdam, The Netherlands]]} and find out what the Org author is doing +besides Emacs hacking with @samp{[[ads:Dominik,C]]}. + +If you need special abbreviations just for a single Org buffer, you +can define them in the file with + +@cindex @samp{LINK}, keyword +@example +#+LINK: bugzilla http://10.1.2.9/bugzilla/show_bug.cgi?id= +#+LINK: duckduckgo https://duckduckgo.com/?q=%s +@end example + +In-buffer completion (see @ref{Completion}) can be used after @samp{[} to +complete link abbreviations. You may also define a Lisp function that +implements special (e.g., completion) support for inserting such a +link with @kbd{C-c C-l}. Such a function should not accept any +arguments, and should return the full link with a prefix. You can set +the link completion function like this: + +@lisp +(org-link-set-parameter "type" :complete #'some-completion-function) +@end lisp + +@node Search Options +@section Search Options in File Links + +@cindex search option in file links +@cindex file links, searching +@cindex attachment links, searching + +File links can contain additional information to make Emacs jump to a +particular location in the file when following a link. This can be a +line number or a search option after a double colon@footnote{For backward compatibility, line numbers can also follow a +single colon.}. For +example, when the command @code{org-store-link} creates a link (see +@ref{Handling Links}) to a file, it encodes the words in the current line +as a search string that can be used to find this line back later when +following the link with @kbd{C-c C-o}. + +Note that all search options apply for Attachment links in the same +way that they apply for File links. + +Here is the syntax of the different ways to attach a search to a file +link, together with explanations for each: + +@example +[[file:~/code/main.c::255]] +[[file:~/xx.org::My Target]] +[[file:~/xx.org::*My Target]] +[[file:~/xx.org::#my-custom-id]] +[[file:~/xx.org::/regexp/]] +[[attachment:main.c::255]] +@end example + +@table @asis +@item @samp{255} +Jump to line 255. + +@item @samp{My Target} +Search for a link target @samp{<>}, or do a text search for +@samp{my target}, similar to the search in internal links, see @ref{Internal Links}. In HTML export (see @ref{HTML Export}), such a file link becomes +a HTML reference to the corresponding named anchor in the linked +file. + +@item @samp{*My Target} +In an Org file, restrict search to headlines. + +@item @samp{#my-custom-id} +Link to a heading with a @samp{CUSTOM_ID} property + +@item @samp{/REGEXP/} +Do a regular expression search for @var{REGEXP} (see @ref{Regular Expressions}). This uses the Emacs command @code{occur} to list all +matches in a separate window. If the target file is in Org mode, +@code{org-occur} is used to create a sparse tree with the matches. +@end table + +As a degenerate case, a file link with an empty file name can be used +to search the current file. For example, @samp{[[file:::find me]]} does +a search for @samp{find me} in the current file, just as @samp{[[find me]]} +would. + +@node Custom Searches +@section Custom Searches + +@cindex custom search strings +@cindex search strings, custom + +The default mechanism for creating search strings and for doing the +actual search related to a file link may not work correctly in all +cases. For example, Bib@TeX{} database files have many entries like +@code{year="1993"} which would not result in good search strings, because +the only unique identification for a Bib@TeX{} entry is the citation key. + +@vindex org-create-file-search-functions +@vindex org-execute-file-search-functions +If you come across such a problem, you can write custom functions to +set the right search string for a particular file type, and to do the +search for the string in the file. Using @code{add-hook}, these functions +need to be added to the hook variables +@code{org-create-file-search-functions} and +@code{org-execute-file-search-functions}. See the docstring for these +variables for more information. Org actually uses this mechanism for +Bib@TeX{} database files, and you can use the corresponding code as an +implementation example. See the file @samp{ol-bibtex.el}. + +@node TODO Items +@chapter TODO Items + +@cindex TODO items + +Org mode does not maintain TODO lists as separate documents@footnote{Of course, you can make a document that contains only long +lists of TODO items, but this is not required.}. +Instead, TODO items are an integral part of the notes file, because +TODO items usually come up while taking notes! With Org mode, simply +mark any entry in a tree as being a TODO item. In this way, +information is not duplicated, and the entire context from which the +TODO item emerged is always present. + +Of course, this technique for managing TODO items scatters them +throughout your notes file. Org mode compensates for this by +providing methods to give you an overview of all the things that you +have to do. + +@menu +* TODO Basics:: Marking and displaying TODO entries. +* TODO Extensions:: Workflow and assignments. +* Progress Logging:: Dates and notes for progress. +* Priorities:: Some things are more important than others. +* Breaking Down Tasks:: Splitting a task into manageable pieces. +* Checkboxes:: Tick-off lists. +@end menu + +@node TODO Basics +@section Basic TODO Functionality + +Any headline becomes a TODO item when it starts with the word @samp{TODO}, +for example: + +@example +*** TODO Write letter to Sam Fortune +@end example + + +The most important commands to work with TODO entries are: + +@table @asis +@item @kbd{C-c C-t} (@code{org-todo}) +@kindex C-c C-t +@cindex cycling, of TODO states +Rotate the TODO state of the current item among + +@example +,-> (unmarked) -> TODO -> DONE --. +'--------------------------------' +@end example + +If TODO keywords have fast access keys (see @ref{Fast access to TODO states}), prompt for a TODO keyword through the fast selection +interface; this is the default behavior when +@code{org-use-fast-todo-selection} is non-@code{nil}. + +The same state changing can also be done ``remotely'' from the agenda +buffer with the @kbd{t} command key (see @ref{Agenda Commands}). + +@item @kbd{S-@key{RIGHT}} @kbd{S-@key{LEFT}} +@kindex S-RIGHT +@kindex S-LEFT +@vindex org-treat-S-cursor-todo-selection-as-state-change +Select the following/preceding TODO state, similar to cycling. +Useful mostly if more than two TODO states are possible (see +@ref{TODO Extensions}). See also @ref{Conflicts}, for a discussion of the interaction with +shift-selection. See also the variable +@code{org-treat-S-cursor-todo-selection-as-state-change}. + +@item @kbd{C-c / t} (@code{org-show-todo-tree}) +@kindex C-c / t +@cindex sparse tree, for TODO +@vindex org-todo-keywords +@findex org-show-todo-tree +View TODO items in a @emph{sparse tree} (see @ref{Sparse Trees}). Folds the +entire buffer, but shows all TODO items---with not-DONE state---and +the headings hierarchy above them. With a prefix argument, or by +using @kbd{C-c / T}, search for a specific TODO@. You are +prompted for the keyword, and you can also give a list of keywords +like @samp{KWD1|KWD2|...} to list entries that match any one of these +keywords. With a numeric prefix argument N, show the tree for the +Nth keyword in the variable @code{org-todo-keywords}. With two prefix +arguments, find all TODO states, both un-done and done. + +@item @kbd{M-x org-agenda t} (@code{org-todo-list}) +@kindex t @r{(Agenda dispatcher)} +Show the global TODO list. Collects the TODO items (with not-DONE +states) from all agenda files (see @ref{Agenda Views}) into a single +buffer. The new buffer is in Org Agenda mode, which provides +commands to examine and manipulate the TODO entries from the new +buffer (see @ref{Agenda Commands}). See @ref{Global TODO list}, for more information. + +@item @kbd{S-M-@key{RET}} (@code{org-insert-todo-heading}) +@kindex S-M-RET +@findex org-insert-todo-heading +Insert a new TODO entry below the current one. +@end table + +@vindex org-todo-state-tags-triggers +Changing a TODO state can also trigger tag changes. See the docstring +of the option @code{org-todo-state-tags-triggers} for details. + +@node TODO Extensions +@section Extended Use of TODO Keywords + +@cindex extended TODO keywords + +@vindex org-todo-keywords +By default, marked TODO entries have one of only two states: TODO and +DONE@. Org mode allows you to classify TODO items in more complex ways +with @emph{TODO keywords} (stored in @code{org-todo-keywords}). With special +setup, the TODO keyword system can work differently in different +files. + +Note that @emph{tags} are another way to classify headlines in general and +TODO items in particular (see @ref{Tags}). + +@menu +* Workflow states:: From TODO to DONE in steps. +* TODO types:: I do this, Fred does the rest. +* Multiple sets in one file:: Mixing it all, still finding your way. +* Fast access to TODO states:: Single letter selection of state. +* Per-file keywords:: Different files, different requirements. +* Faces for TODO keywords:: Highlighting states. +* TODO dependencies:: When one task needs to wait for others. +@end menu + +@node Workflow states +@subsection TODO keywords as workflow states + +@cindex TODO workflow +@cindex workflow states as TODO keywords + +You can use TODO keywords to indicate different, possibly @emph{sequential} +states in the process of working on an item, for example@footnote{Changing the variable @code{org-todo-keywords} only becomes +effective after restarting Org mode in a buffer.}: + +@lisp +(setq org-todo-keywords + '((sequence "TODO" "FEEDBACK" "VERIFY" "|" "DONE" "DELEGATED"))) +@end lisp + +The vertical bar separates the TODO keywords (states that @emph{need +action}) from the DONE states (which need @emph{no further action}). If +you do not provide the separator bar, the last state is used as the +DONE state. + +@cindex completion, of TODO keywords +With this setup, the command @kbd{C-c C-t} cycles an entry from +@samp{TODO} to @samp{FEEDBACK}, then to @samp{VERIFY}, and finally to @samp{DONE} and +@samp{DELEGATED}. You may also use a numeric prefix argument to quickly +select a specific state. For example @kbd{C-3 C-c C-t} changes +the state immediately to @samp{VERIFY}. Or you can use @kbd{S-@key{RIGHT}} +and @kbd{S-@key{LEFT}} to go forward and backward through the states. +If you define many keywords, you can use in-buffer completion (see +@ref{Completion}) or a special one-key selection scheme (see @ref{Fast access to TODO states}) to insert these words into the buffer. +Changing a TODO state can be logged with a timestamp, see @ref{Tracking TODO state changes}, for more information. + +@node TODO types +@subsection TODO keywords as types + +@cindex TODO types +@cindex names as TODO keywords +@cindex types as TODO keywords + +The second possibility is to use TODO keywords to indicate different +@emph{types} of action items. For example, you might want to indicate that +items are for ``work'' or ``home''. Or, when you work with several people +on a single project, you might want to assign action items directly to +persons, by using their names as TODO keywords. This type of +functionality is actually much better served by using tags (see +@ref{Tags}), so the TODO implementation is kept just for backward +compatibility. + +Using TODO types, it would be set up like this: + +@lisp +(setq org-todo-keywords '((type "Fred" "Sara" "Lucy" "|" "DONE"))) +@end lisp + +In this case, different keywords do not indicate states, but +rather different types. So the normal work flow would be to assign +a task to a person, and later to mark it DONE@. Org mode supports this +style by adapting the workings of the command @kbd{C-c C-t}@footnote{This is also true for the @kbd{t} command in the agenda +buffer.}. When used several times in succession, it still +cycles through all names, in order to first select the right type for +a task. But when you return to the item after some time and execute +@kbd{C-c C-t} again, it will switch from any name directly to +@samp{DONE}. Use prefix arguments or completion to quickly select +a specific name. You can also review the items of a specific TODO +type in a sparse tree by using a numeric prefix to @kbd{C-c / t}. +For example, to see all things Lucy has to do, you would use +@kbd{C-3 C-c / t}. To collect Lucy's items from all agenda files +into a single buffer, you would use the numeric prefix argument as +well when creating the global TODO list: @kbd{C-3 M-x org-agenda t}. + +@node Multiple sets in one file +@subsection Multiple keyword sets in one file + +@cindex TODO keyword sets + +Sometimes you may want to use different sets of TODO keywords in +parallel. For example, you may want to have the basic TODO/DONE, but +also a workflow for bug fixing, and a separate state indicating that +an item has been canceled---so it is not DONE, but also does not +require action. Your setup would then look like this: + +@lisp +(setq org-todo-keywords + '((sequence "TODO" "|" "DONE") + (sequence "REPORT" "BUG" "KNOWNCAUSE" "|" "FIXED") + (sequence "|" "CANCELED"))) +@end lisp + +The keywords should all be different, this helps Org mode keep track +of which subsequence should be used for a given entry. In this setup, +@kbd{C-c C-t} only operates within a sub-sequence, so it switches +from @samp{DONE} to (nothing) to @samp{TODO}, and from @samp{FIXED} to (nothing) to +@samp{REPORT}. Therefore you need a mechanism to initially select the +correct sequence. In addition to typing a keyword or using completion +(see @ref{Completion}), you may also apply the following commands: + +@table @asis +@item @kbd{C-u C-u C-c C-t} +@itemx @kbd{C-S-@key{RIGHT}} +@itemx @kbd{C-S-@key{LEFT}} +@kindex C-S-RIGHT +@kindex C-S-LEFT +@kindex C-u C-u C-c C-t +These keys jump from one TODO sub-sequence to the next. In the +above example, @kbd{C-u C-u C-c C-t} or @kbd{C-S-@key{RIGHT}} +would jump from @samp{TODO} or @samp{DONE} to @samp{REPORT}, and any of the words +in the second row to @samp{CANCELED}. Note that the @kbd{C-S-} key +binding conflict with shift-selection (see @ref{Conflicts}). + +@item @kbd{S-@key{RIGHT}} +@itemx @kbd{S-@key{LEFT}} +@kindex S-RIGHT +@kindex S-LEFT +@kbd{S-@key{LEFT}} and @kbd{S-@key{RIGHT}} walk through @emph{all} keywords +from all sub-sequences, so for example @kbd{S-@key{RIGHT}} would +switch from @samp{DONE} to @samp{REPORT} in the example above. For +a discussion of the interaction with shift-selection, see @ref{Conflicts}. +@end table + +@node Fast access to TODO states +@subsection Fast access to TODO states + +If you would like to quickly change an entry to an arbitrary TODO +state instead of cycling through the states, you can set up keys for +single-letter access to the states. This is done by adding the +selection character after each keyword, in parentheses@footnote{All characters are allowed except @samp{@@}, @samp{^} and @samp{!}, which have +a special meaning here.}. For +example: + +@lisp +(setq org-todo-keywords + '((sequence "TODO(t)" "|" "DONE(d)") + (sequence "REPORT(r)" "BUG(b)" "KNOWNCAUSE(k)" "|" "FIXED(f)") + (sequence "|" "CANCELED(c)"))) +@end lisp + +@vindex org-fast-tag-selection-include-todo +If you then press @kbd{C-c C-t} followed by the selection key, +the entry is switched to this state. @kbd{@key{SPC}} can be used to +remove any TODO keyword from an entry@footnote{Check also the variable @code{org-fast-tag-selection-include-todo}, +it allows you to change the TODO state through the tags interface (see +@ref{Setting Tags}), in case you like to mingle the two concepts. Note +that this means you need to come up with unique keys across both sets +of keywords.}. + +@node Per-file keywords +@subsection Setting up keywords for individual files + +@cindex keyword options +@cindex per-file keywords +@cindex @samp{TODO}, keyword +@cindex @samp{TYP_TODO}, keyword +@cindex @samp{SEQ_TODO}, keyword + +It can be very useful to use different aspects of the TODO mechanism +in different files. For file-local settings, you need to add special +lines to the file which set the keywords and interpretation for that +file only. For example, to set one of the two examples discussed +above, you need one of the following lines, starting in column zero +anywhere in the file: + +@example +#+TODO: TODO FEEDBACK VERIFY | DONE CANCELED +@end example + + +You may also write @samp{#+SEQ_TODO} to be explicit about the +interpretation, but it means the same as @samp{#+TODO}, or + +@example +#+TYP_TODO: Fred Sara Lucy Mike | DONE +@end example + + +A setup for using several sets in parallel would be: + +@example +#+TODO: TODO(t) | DONE(d) +#+TODO: REPORT(r) BUG(b) KNOWNCAUSE(k) | FIXED(f) +#+TODO: | CANCELED(c) +@end example + +@cindex completion, of option keywords +@kindex M-TAB +To make sure you are using the correct keyword, type @samp{#+} into the +buffer and then use @kbd{M-@key{TAB}} to complete it (see @ref{Completion}). + +@cindex DONE, final TODO keyword +Remember that the keywords after the vertical bar---or the last +keyword if no bar is there---must always mean that the item is DONE, +although you may use a different word. After changing one of these +lines, use @kbd{C-c C-c} with point still in the line to make the +changes known to Org mode@footnote{Org mode parses these lines only when Org mode is activated +after visiting a file. @kbd{C-c C-c} with point in a line +starting with @samp{#+} is simply restarting Org mode for the current +buffer.}. + +@node Faces for TODO keywords +@subsection Faces for TODO keywords + +@cindex faces, for TODO keywords + +@vindex org-todo, face +@vindex org-done, face +@vindex org-todo-keyword-faces +Org mode highlights TODO keywords with special faces: @code{org-todo} for +keywords indicating that an item still has to be acted upon, and +@code{org-done} for keywords indicating that an item is finished. If you +are using more than two different states, you might want to use +special faces for some of them. This can be done using the variable +@code{org-todo-keyword-faces}. For example: + +@lisp +(setq org-todo-keyword-faces + '(("TODO" . org-warning) ("STARTED" . "yellow") + ("CANCELED" . (:foreground "blue" :weight bold)))) +@end lisp + +@vindex org-faces-easy-properties +While using a list with face properties as shown for @samp{CANCELED} +@emph{should} work, this does not always seem to be the case. If +necessary, define a special face and use that. A string is +interpreted as a color. The variable @code{org-faces-easy-properties} +determines if that color is interpreted as a foreground or +a background color. + +@node TODO dependencies +@subsection TODO dependencies + +@cindex TODO dependencies +@cindex dependencies, of TODO states + +@vindex org-enforce-todo-dependencies +@cindex @samp{ORDERED}, property +The structure of Org files---hierarchy and lists---makes it easy to +define TODO dependencies. Usually, a parent TODO task should not be +marked as done until all TODO subtasks, or children tasks, are marked +as done. Sometimes there is a logical sequence to (sub)tasks, so that +one subtask cannot be acted upon before all siblings above it have +been marked as done. If you customize the variable +@code{org-enforce-todo-dependencies}, Org blocks entries from changing +state to DONE while they have TODO children that are not DONE@. +Furthermore, if an entry has a property @samp{ORDERED}, each of its TODO +children is blocked until all earlier siblings are marked as done. +Here is an example: + +@example +* TODO Blocked until (two) is done +** DONE one +** TODO two + +* Parent +:PROPERTIES: +:ORDERED: t +:END: +** TODO a +** TODO b, needs to wait for (a) +** TODO c, needs to wait for (a) and (b) +@end example + +@cindex TODO dependencies, @samp{NOBLOCKING} +@cindex @samp{NOBLOCKING}, property +You can ensure an entry is never blocked by using the @samp{NOBLOCKING} +property (see @ref{Properties and Columns}): + +@example +* This entry is never blocked +:PROPERTIES: +:NOBLOCKING: t +:END: +@end example + +@table @asis +@item @kbd{C-c C-x o} (@code{org-toggle-ordered-property}) +@kindex C-c C-x o +@findex org-toggle-ordered-property +@vindex org-track-ordered-property-with-tag +Toggle the @samp{ORDERED} property of the current entry. A property is +used for this behavior because this should be local to the current +entry, not inherited from entries above like a tag (see @ref{Tags}). +However, if you would like to @emph{track} the value of this property +with a tag for better visibility, customize the variable +@code{org-track-ordered-property-with-tag}. + +@item @kbd{C-u C-u C-u C-c C-t} +@kindex C-u C-u C-u C-u C-c C-t +Change TODO state, regardless of any state blocking. +@end table + +@vindex org-agenda-dim-blocked-tasks +If you set the variable @code{org-agenda-dim-blocked-tasks}, TODO entries +that cannot be marked as done because of unmarked children are shown +in a dimmed font or even made invisible in agenda views (see @ref{Agenda Views}). + +@cindex checkboxes and TODO dependencies +@vindex org-enforce-todo-dependencies +You can also block changes of TODO states by using checkboxes (see +@ref{Checkboxes}). If you set the variable +@code{org-enforce-todo-checkbox-dependencies}, an entry that has unchecked +checkboxes is blocked from switching to DONE@. + +If you need more complex dependency structures, for example +dependencies between entries in different trees or files, check out +the module @samp{org-depend.el} in the @samp{org-contrib} repository. + +@node Progress Logging +@section Progress Logging + +@cindex progress logging +@cindex logging, of progress + +To record a timestamp and a note when changing a TODO state, call the +command @code{org-todo} with a prefix argument. + +@table @asis +@item @kbd{C-u C-c C-t} (@code{org-todo}) +@kindex C-u C-c C-t +Prompt for a note and record a the time of the TODO state change. +The note is inserted as a list item below the headline, but can also +be placed into a drawer, see @ref{Tracking TODO state changes}. +@end table + +If you want to be more systematic, Org mode can automatically record a +timestamp and optionally a note when you mark a TODO item as DONE, or +even each time you change the state of a TODO item. This system is +highly configurable, settings can be on a per-keyword basis and can be +localized to a file or even a subtree. For information on how to +clock working time for a task, see @ref{Clocking Work Time}. + +@menu +* Closing items:: When was this entry marked as done? +* Tracking TODO state changes:: When did the status change? +* Tracking your habits:: How consistent have you been? +@end menu + +@node Closing items +@subsection Closing items + +The most basic automatic logging is to keep track of @emph{when} a certain +TODO item was marked as done. This can be achieved with@footnote{The corresponding in-buffer setting is: @samp{#+STARTUP: logdone}.} + +@lisp +(setq org-log-done 'time) +@end lisp + +@vindex org-closed-keep-when-no-todo +@noindent +Then each time you turn an entry from a TODO (not-done) state into any +of the DONE states, a line @samp{CLOSED: [timestamp]} is inserted just +after the headline. If you turn the entry back into a TODO item +through further state cycling, that line is removed again. If you +turn the entry back to a non-TODO state (by pressing @kbd{C-c C-t @key{SPC}} for example), that line is also removed, unless you set +@code{org-closed-keep-when-no-todo} to non-@code{nil}. If you want to record +a note along with the timestamp, use@footnote{The corresponding in-buffer setting is: @samp{#+STARTUP: +lognotedone}.} + +@lisp +(setq org-log-done 'note) +@end lisp + +@noindent +You are then prompted for a note, and that note is stored below the +entry with a @samp{Closing Note} heading. + +@node Tracking TODO state changes +@subsection Tracking TODO state changes + +@cindex drawer, for state change recording + +@vindex org-log-states-order-reversed +@vindex org-log-into-drawer +@cindex @samp{LOG_INTO_DRAWER}, property +You might want to automatically keep track of when a state change +occurred and maybe take a note about this change. You can either +record just a timestamp, or a time-stamped note. These records are +inserted after the headline as an itemized list, newest first@footnote{See the variable @code{org-log-states-order-reversed}.}. +When taking a lot of notes, you might want to get the notes out of the +way into a drawer (see @ref{Drawers}). Customize the variable +@code{org-log-into-drawer} to get this behavior---the recommended drawer +for this is called @samp{LOGBOOK}@footnote{Note that the @samp{LOGBOOK} drawer is unfolded when pressing +@kbd{@key{SPC}} in the agenda to show an entry---use @kbd{C-u @key{SPC}} to keep it folded here.}. You can also overrule the +setting of this variable for a subtree by setting a @samp{LOG_INTO_DRAWER} +property. + +Since it is normally too much to record a note for every state, Org +mode expects configuration on a per-keyword basis for this. This is +achieved by adding special markers @samp{!} (for a timestamp) or @samp{@@} (for +a note with timestamp) in parentheses after each keyword. For +example, with the setting + +@lisp +(setq org-todo-keywords + '((sequence "TODO(t)" "WAIT(w@@/!)" "|" "DONE(d!)" "CANCELED(c@@)"))) +@end lisp + +@vindex org-log-done +You not only define global TODO keywords and fast access keys, but +also request that a time is recorded when the entry is set to @samp{DONE}, +and that a note is recorded when switching to @samp{WAIT} or +@samp{CANCELED}@footnote{It is possible that Org mode records two timestamps when you +are using both @code{org-log-done} and state change logging. However, it +never prompts for two notes: if you have configured both, the state +change recording note takes precedence and cancel the closing note.}. The setting for @samp{WAIT} is even more special: the +@samp{!} after the slash means that in addition to the note taken when +entering the state, a timestamp should be recorded when @emph{leaving} the +@samp{WAIT} state, if and only if the @emph{target} state does not configure +logging for entering it. So it has no effect when switching from +@samp{WAIT} to @samp{DONE}, because @samp{DONE} is configured to record a timestamp +only. But when switching from @samp{WAIT} back to @samp{TODO}, the @samp{/!} in the +@samp{WAIT} setting now triggers a timestamp even though @samp{TODO} has no +logging configured. + +You can use the exact same syntax for setting logging preferences local +to a buffer: + +@example +#+TODO: TODO(t) WAIT(w@@/!) | DONE(d!) CANCELED(c@@) +@end example + + +To record a timestamp without a note for TODO keywords configured with +@samp{@@}, just type @kbd{C-c C-c} to enter a blank note when prompted. + +@cindex @samp{LOGGING}, property +In order to define logging settings that are local to a subtree or +a single item, define a @samp{LOGGING} property in this entry. Any +non-empty @samp{LOGGING} property resets all logging settings to @code{nil}. +You may then turn on logging for this specific tree using @samp{STARTUP} +keywords like @samp{lognotedone} or @samp{logrepeat}, as well as adding state +specific settings like @samp{TODO(!)}. For example: + +@example +* TODO Log each state with only a time + :PROPERTIES: + :LOGGING: TODO(!) WAIT(!) DONE(!) CANCELED(!) + :END: +* TODO Only log when switching to WAIT, and when repeating + :PROPERTIES: + :LOGGING: WAIT(@@) logrepeat + :END: +* TODO No logging at all + :PROPERTIES: + :LOGGING: nil + :END: +@end example + +@node Tracking your habits +@subsection Tracking your habits + +@cindex habits +@cindex @samp{STYLE}, property + +Org has the ability to track the consistency of a special category of +TODO, called ``habits.'' To use habits, you have to enable the @code{habits} +module by customizing the variable @code{org-modules}. + +A habit has the following properties: + +@enumerate +@item +The habit is a TODO item, with a TODO keyword representing an open +state. + +@item +The property @samp{STYLE} is set to the value @samp{habit} (see @ref{Properties and Columns}). + +@item +The TODO has a scheduled date, usually with a @samp{.+} style repeat +interval. A @samp{++} style may be appropriate for habits with time +constraints, e.g., must be done on weekends, or a @samp{+} style for an +unusual habit that can have a backlog, e.g., weekly reports. + +@item +The TODO may also have minimum and maximum ranges specified by +using the syntax @samp{.+2d/3d}, which says that you want to do the task +at least every three days, but at most every two days. + +@item +State logging for the DONE state is enabled (see @ref{Tracking TODO state changes}), in order for historical data to be represented in +the consistency graph. If it is not enabled it is not an error, +but the consistency graphs are largely meaningless. +@end enumerate + +To give you an idea of what the above rules look like in action, here's an +actual habit with some history: + +@example +** TODO Shave + SCHEDULED: <2009-10-17 Sat .+2d/4d> + :PROPERTIES: + :STYLE: habit + :LAST_REPEAT: [2009-10-19 Mon 00:36] + :END: + - State "DONE" from "TODO" [2009-10-15 Thu] + - State "DONE" from "TODO" [2009-10-12 Mon] + - State "DONE" from "TODO" [2009-10-10 Sat] + - State "DONE" from "TODO" [2009-10-04 Sun] + - State "DONE" from "TODO" [2009-10-02 Fri] + - State "DONE" from "TODO" [2009-09-29 Tue] + - State "DONE" from "TODO" [2009-09-25 Fri] + - State "DONE" from "TODO" [2009-09-19 Sat] + - State "DONE" from "TODO" [2009-09-16 Wed] + - State "DONE" from "TODO" [2009-09-12 Sat] +@end example + +What this habit says is: I want to shave at most every 2 days---given +by the @samp{SCHEDULED} date and repeat interval---and at least every +4 days. If today is the 15th, then the habit first appears in the +agenda (see @ref{Agenda Views}) on Oct 17, after the minimum of 2 days has +elapsed, and will appear overdue on Oct 19, after four days have +elapsed. + +What's really useful about habits is that they are displayed along +with a consistency graph, to show how consistent you've been at +getting that task done in the past. This graph shows every day that +the task was done over the past three weeks, with colors for each day. +The colors used are: + +@table @asis +@item Blue +If the task was not to be done yet on that day. +@item Green +If the task could have been done on that day. +@item Yellow +If the task was going to be overdue the next day. +@item Red +If the task was overdue on that day. +@end table + +In addition to coloring each day, the day is also marked with an +asterisk if the task was actually done that day, and an exclamation +mark to show where the current day falls in the graph. + +There are several configuration variables that can be used to change +the way habits are displayed in the agenda. + +@table @asis +@item @code{org-habit-graph-column} +@vindex org-habit-graph-column +The buffer column at which the consistency graph should be drawn. +This overwrites any text in that column, so it is a good idea to +keep your habits' titles brief and to the point. + +@item @code{org-habit-preceding-days} +@vindex org-habit-preceding-days +The amount of history, in days before today, to appear in +consistency graphs. + +@item @code{org-habit-following-days} +@vindex org-habit-following-days +The number of days after today that appear in consistency graphs. + +@item @code{org-habit-show-habits-only-for-today} +@vindex org-habit-show-habits-only-for-today +If non-@code{nil}, only show habits in today's agenda view. The default +value is @code{t}. Pressing @kbd{C-u K} in the agenda toggles this +variable. +@end table + +Lastly, pressing @kbd{K} in the agenda buffer causes habits to +temporarily be disabled and do not appear at all. Press @kbd{K} +again to bring them back. They are also subject to tag filtering, if +you have habits which should only be done in certain contexts, for +example. + +@node Priorities +@section Priorities + +@cindex priorities +@cindex priority cookie + +If you use Org mode extensively, you may end up with enough TODO items +that it starts to make sense to prioritize them. Prioritizing can be +done by placing a @emph{priority cookie} into the headline of a TODO item +right after the TODO keyword, like this: + +@example +*** TODO [#A] Write letter to Sam Fortune +@end example + + +@vindex org-priority-faces +By default, Org mode supports three priorities: @samp{A}, @samp{B}, and @samp{C}. +@samp{A} is the highest priority. An entry without a cookie is treated as +equivalent if it had priority @samp{B}. Priorities make a difference only +for sorting in the agenda (see @ref{Weekly/daily agenda}). Outside the +agenda, they have no inherent meaning to Org mode. The cookies are +displayed with the face defined by the variable @code{org-priority-faces}, +which can be customized. + +You can also use numeric values for priorities, such as + +@example +*** TODO [#1] Write letter to Sam Fortune +@end example + + +When using numeric priorities, you need to set @code{org-priority-highest}, +@code{org-priority-lowest} and @code{org-priority-default} to integers, which +must all be strictly inferior to 65. + +Priorities can be attached to any outline node; they do not need to be +TODO items. + +@table @asis +@item @kbd{C-c ,} (@code{org-priority}) +@kindex C-c , +@findex org-priority +Set the priority of the current headline. The command prompts for +a priority character @samp{A}, @samp{B} or @samp{C}. When you press @kbd{@key{SPC}} +instead, the priority cookie, if one is set, is removed from the +headline. The priorities can also be changed ``remotely'' from the +agenda buffer with the @kbd{,} command (see @ref{Agenda Commands}). + +@item @kbd{S-@key{UP}} (@code{org-priority-up}) +@itemx @kbd{S-@key{DOWN}} (@code{org-priority-down}) +@kindex S-UP +@kindex S-DOWN +@findex org-priority-up +@findex org-priority-down +@vindex org-priority-start-cycle-with-default +Increase/decrease the priority of the current headline@footnote{See also the option @code{org-priority-start-cycle-with-default}.}. Note +that these keys are also used to modify timestamps (see @ref{Creating Timestamps}). See also @ref{Conflicts}, for +a discussion of the interaction with shift-selection. +@end table + +@vindex org-priority-highest +@vindex org-priority-lowest +@vindex org-priority-default +You can change the range of allowed priorities by setting the +variables @code{org-priority-highest}, @code{org-priority-lowest}, and +@code{org-priority-default}. For an individual buffer, you may set these +values (highest, lowest, default) like this (please make sure that the +highest priority is earlier in the alphabet than the lowest priority): + +@cindex @samp{PRIORITIES}, keyword +@example +#+PRIORITIES: A C B +@end example + + +Or, using numeric values: + +@example +#+PRIORITIES: 1 10 5 +@end example + +@node Breaking Down Tasks +@section Breaking Down Tasks into Subtasks + +@cindex tasks, breaking down +@cindex statistics, for TODO items + +@vindex org-agenda-todo-list-sublevels +It is often advisable to break down large tasks into smaller, +manageable subtasks. You can do this by creating an outline tree +below a TODO item, with detailed subtasks on the tree@footnote{To keep subtasks out of the global TODO list, see the option +@code{org-agenda-todo-list-sublevels}.}. To keep +an overview of the fraction of subtasks that have already been marked +as done, insert either @samp{[/]} or @samp{[%]} anywhere in the headline. These +cookies are updated each time the TODO status of a child changes, or +when pressing @kbd{C-c C-c} on the cookie. For example: + +@example +* Organize Party [33%] +** TODO Call people [1/2] +*** TODO Peter +*** DONE Sarah +** TODO Buy food +** DONE Talk to neighbor +@end example + +@cindex @samp{COOKIE_DATA}, property +If a heading has both checkboxes and TODO children below it, the +meaning of the statistics cookie become ambiguous. Set the property +@samp{COOKIE_DATA} to either @samp{checkbox} or @samp{todo} to resolve this issue. + +@vindex org-hierarchical-todo-statistics +If you would like to have the statistics cookie count any TODO entries +in the subtree (not just direct children), configure the variable +@code{org-hierarchical-todo-statistics}. To do this for a single subtree, +include the word @samp{recursive} into the value of the @samp{COOKIE_DATA} +property. + +@example +* Parent capturing statistics [2/20] + :PROPERTIES: + :COOKIE_DATA: todo recursive + :END: +@end example + +If you would like a TODO entry to automatically change to DONE when +all children are done, you can use the following setup: + +@lisp +(defun org-summary-todo (n-done n-not-done) + "Switch entry to DONE when all subentries are done, to TODO otherwise." + (let (org-log-done org-log-states) ; turn off logging + (org-todo (if (= n-not-done 0) "DONE" "TODO")))) + +(add-hook 'org-after-todo-statistics-hook #'org-summary-todo) +@end lisp + +Another possibility is the use of checkboxes to identify (a hierarchy +of) a large number of subtasks (see @ref{Checkboxes}). + +@node Checkboxes +@section Checkboxes + +@cindex checkboxes + +@vindex org-list-automatic-rules +Every item in a plain list@footnote{With the exception of description lists. But you can allow it +by modifying @code{org-list-automatic-rules} accordingly.} (see @ref{Plain Lists}) can be made into +a checkbox by starting it with the string @samp{[ ]}. This feature is +similar to TODO items (see @ref{TODO Items}), but is more lightweight. +Checkboxes are not included into the global TODO list, so they are +often great to split a task into a number of simple steps. Or you can +use them in a shopping list. + +Here is an example of a checkbox list. + +@example +* TODO Organize party [2/4] + - [-] call people [1/3] + - [ ] Peter + - [X] Sarah + - [ ] Sam + - [X] order food + - [ ] think about what music to play + - [X] talk to the neighbors +@end example + +Checkboxes work hierarchically, so if a checkbox item has children +that are checkboxes, toggling one of the children checkboxes makes the +parent checkbox reflect if none, some, or all of the children are +checked. + +@cindex statistics, for checkboxes +@cindex checkbox statistics +@cindex @samp{COOKIE_DATA}, property +@vindex org-hierarchical-checkbox-statistics +The @samp{[2/4]} and @samp{[1/3]} in the first and second line are cookies +indicating how many checkboxes present in this entry have been checked +off, and the total number of checkboxes present. This can give you an +idea on how many checkboxes remain, even without opening a folded +entry. The cookies can be placed into a headline or into (the first +line of) a plain list item. Each cookie covers checkboxes of direct +children structurally below the headline/item on which the cookie +appears@footnote{Set the variable @code{org-hierarchical-checkbox-statistics} if you +want such cookies to count all checkboxes below the cookie, not just +those belonging to direct children.}. You have to insert the cookie yourself by typing +either @samp{[/]} or @samp{[%]}. With @samp{[/]} you get an @samp{n out of m} result, as +in the examples above. With @samp{[%]} you get information about the +percentage of checkboxes checked (in the above example, this would be +@samp{[50%]} and @samp{[33%]}, respectively). In a headline, a cookie can count +either checkboxes below the heading or TODO states of children, and it +displays whatever was changed last. Set the property @samp{COOKIE_DATA} to +either @samp{checkbox} or @samp{todo} to resolve this issue. + +@cindex blocking, of checkboxes +@cindex checkbox blocking +@cindex @samp{ORDERED}, property +If the current outline node has an @samp{ORDERED} property, checkboxes must +be checked off in sequence, and an error is thrown if you try to check +off a box while there are unchecked boxes above it. + +The following commands work with checkboxes: + +@table @asis +@item @kbd{C-c C-c} (@code{org-toggle-checkbox}) +@kindex C-c C-c +@findex org-toggle-checkbox +Toggle checkbox status or---with prefix argument---checkbox presence +at point. With a single prefix argument, add an empty checkbox or +remove the current one@footnote{@kbd{C-u C-c C-c} on the @emph{first} item of a list with no +checkbox adds checkboxes to the rest of the list.}. With a double prefix argument, set +it to @samp{[-]}, which is considered to be an intermediate state. + +@item @kbd{C-c C-x C-b} (@code{org-toggle-checkbox}) +@kindex C-c C-x C-b +Toggle checkbox status or---with prefix argument---checkbox presence +at point. With double prefix argument, set it to @samp{[-]}, which is +considered to be an intermediate state. + +@itemize +@item +If there is an active region, toggle the first checkbox in the +region and set all remaining boxes to the same status as the +first. With a prefix argument, add or remove the checkbox for all +items in the region. + +@item +If point is in a headline, toggle checkboxes in the region between +this headline and the next---so @emph{not} the entire subtree. + +@item +If there is no active region, just toggle the checkbox at point. +@end itemize + +@item @kbd{C-c C-x C-r} (@code{org-toggle-radio-button}) +@kindex C-c C-x C-r +@findex org-toggle-radio-button +@cindex radio button, checkbox as +Toggle checkbox status by using the checkbox of the item at point as +a radio button: when the checkbox is turned on, all other checkboxes +on the same level will be turned off. With a universal prefix +argument, toggle the presence of the checkbox. With a double prefix +argument, set it to @samp{[-]}. + +@findex org-list-checkbox-radio-mode +@kbd{C-c C-c} can be told to consider checkboxes as radio buttons by +setting @samp{#+ATTR_ORG: :radio t} right before the list or by calling +@kbd{M-x org-list-checkbox-radio-mode} to activate this minor mode. + +@item @kbd{M-S-@key{RET}} (@code{org-insert-todo-heading}) +@kindex M-S-RET +@findex org-insert-todo-heading +Insert a new item with a checkbox. This works only if point is +already in a plain list item (see @ref{Plain Lists}). + +@item @kbd{C-c C-x o} (@code{org-toggle-ordered-property}) +@kindex C-c C-x o +@findex org-toggle-ordered-property +@vindex org-track-ordered-property-with-tag +Toggle the @samp{ORDERED} property of the entry, to toggle if checkboxes +must be checked off in sequence. A property is used for this +behavior because this should be local to the current entry, not +inherited like a tag. However, if you would like to @emph{track} the +value of this property with a tag for better visibility, customize +@code{org-track-ordered-property-with-tag}. + +@item @kbd{C-c #} (@code{org-update-statistics-cookies}) +@kindex C-c # +@findex org-update-statistics-cookies +Update the statistics cookie in the current outline entry. When +called with a @kbd{C-u} prefix, update the entire file. +Checkbox statistic cookies are updated automatically if you toggle +checkboxes with @kbd{C-c C-c} and make new ones with +@kbd{M-S-@key{RET}}. TODO statistics cookies update when changing +TODO states. If you delete boxes/entries or add/change them by +hand, use this command to get things back into sync. +@end table + +@node Tags +@chapter Tags + +@cindex tags +@cindex headline tagging +@cindex matching, tags +@cindex sparse tree, tag based + +An excellent way to implement labels and contexts for +cross-correlating information is to assign @emph{tags} to headlines. Org +mode has extensive support for tags. + +@vindex org-tag-faces +Every headline can contain a list of tags; they occur at the end of +the headline. Tags are normal words containing letters, numbers, @samp{_}, +and @samp{@@}. Tags must be preceded and followed by a single colon, e.g., +@samp{:work:}. Several tags can be specified, as in @samp{:work:urgent:}. Tags +by default are in bold face with the same color as the headline. You +may specify special faces for specific tags using the variable +@code{org-tag-faces}, in much the same way as you can for TODO keywords +(see @ref{Faces for TODO keywords}). + +@menu +* Tag Inheritance:: Tags use the tree structure of an outline. +* Setting Tags:: How to assign tags to a headline. +* Tag Hierarchy:: Create a hierarchy of tags. +* Tag Searches:: Searching for combinations of tags. +@end menu + +@node Tag Inheritance +@section Tag Inheritance + +@cindex tag inheritance +@cindex inheritance, of tags +@cindex sublevels, inclusion into tags match + +@emph{Tags} make use of the hierarchical structure of outline trees. If +a heading has a certain tag, all subheadings inherit the tag as well. +For example, in the list + +@example +* Meeting with the French group :work: +** Summary by Frank :boss:notes: +*** TODO Prepare slides for him :action: +@end example + +@noindent +the final heading has the tags @samp{work}, @samp{boss}, @samp{notes}, and @samp{action} +even though the final heading is not explicitly marked with those +tags. You can also set tags that all entries in a file should inherit +just as if these tags were defined in a hypothetical level zero that +surrounds the entire file. Use a line like this@footnote{As with all these in-buffer settings, pressing @kbd{C-c C-c} activates any changes in the line.} + +@cindex @samp{FILETAGS}, keyword +@example +#+FILETAGS: :Peter:Boss:Secret: +@end example + + +@vindex org-use-tag-inheritance +@vindex org-tags-exclude-from-inheritance +To limit tag inheritance to specific tags, or to turn it off entirely, +use the variables @code{org-use-tag-inheritance} and +@code{org-tags-exclude-from-inheritance}. + +@vindex org-tags-match-list-sublevels +When a headline matches during a tags search while tag inheritance is +turned on, all the sublevels in the same tree---for a simple match +form---match as well@footnote{This is only true if the search does not involve more complex +tests including properties (see @ref{Property Searches}).}. The list of matches may then become +very long. If you only want to see the first tags match in a subtree, +configure the variable @code{org-tags-match-list-sublevels} (not +recommended). + +@vindex org-agenda-use-tag-inheritance +Tag inheritance is relevant when the agenda search tries to match +a tag, either in the @code{tags} or @code{tags-todo} agenda types. In other +agenda types, @code{org-use-tag-inheritance} has no effect. Still, you may +want to have your tags correctly set in the agenda, so that tag +filtering works fine, with inherited tags. Set +@code{org-agenda-use-tag-inheritance} to control this: the default value +includes all agenda types, but setting this to @code{nil} can really speed +up agenda generation. + +@node Setting Tags +@section Setting Tags + +@cindex setting tags +@cindex tags, setting + +@kindex M-TAB +Tags can simply be typed into the buffer at the end of a headline. +After a colon, @kbd{M-@key{TAB}} offers completion on tags. There is +also a special command for inserting tags: + +@table @asis +@item @kbd{C-c C-q} (@code{org-set-tags-command}) +@kindex C-c C-q +@findex org-set-tags-command +@cindex completion, of tags +@vindex org-tags-column +Enter new tags for the current headline. Org mode either offers +completion or a special single-key interface for setting tags, see +below. After pressing @kbd{@key{RET}}, the tags are inserted and +aligned to @code{org-tags-column}. When called with a @kbd{C-u} +prefix, all tags in the current buffer are aligned to that column, +just to make things look nice. Tags are automatically realigned +after promotion, demotion, and TODO state changes (see @ref{TODO Basics}). + +@item @kbd{C-c C-c} (@code{org-set-tags-command}) +@kindex C-c C-c +When point is in a headline, this does the same as @kbd{C-c C-q}. +@end table + +@vindex org-complete-tags-always-offer-all-agenda-tags +@vindex org-tag-alist +@cindex @samp{TAGS}, keyword +Org supports tag insertion based on a @emph{list of tags}. By default this +list is constructed dynamically, containing all tags currently used in +the buffer@footnote{To extend this default list to all tags used in all agenda +files (see @ref{Agenda Views}), customize the variable +@code{org-complete-tags-always-offer-all-agenda-tags}.}. You may also globally specify a hard list of tags +with the variable @code{org-tag-alist}. Finally you can set the default +tags for a given file using the @samp{TAGS} keyword, like + +@example +#+TAGS: @@work @@home @@tennisclub +#+TAGS: laptop car pc sailboat +@end example + +If you have globally defined your preferred set of tags using the +variable @code{org-tag-alist}, but would like to use a dynamic tag list in +a specific file, add an empty @samp{TAGS} keyword to that file: + +@example +#+TAGS: +@end example + + +@vindex org-tag-persistent-alist +If you have a preferred set of tags that you would like to use in +every file, in addition to those defined on a per-file basis by @samp{TAGS} +keyword, then you may specify a list of tags with the variable +@code{org-tag-persistent-alist}. You may turn this off on a per-file basis +by adding a @samp{STARTUP} keyword to that file: + +@example +#+STARTUP: noptag +@end example + + +By default Org mode uses the standard minibuffer completion facilities +for entering tags. However, it also implements another, quicker, tag +selection method called @emph{fast tag selection}. This allows you to +select and deselect tags with just a single key press. For this to +work well you should assign unique letters to most of your commonly +used tags. You can do this globally by configuring the variable +@code{org-tag-alist} in your Emacs init file. For example, you may find +the need to tag many items in different files with @samp{@@home}. In this +case you can set something like: + +@lisp +(setq org-tag-alist '(("@@work" . ?w) ("@@home" . ?h) ("laptop" . ?l))) +@end lisp + +If the tag is only relevant to the file you are working on, then you +can instead set the @samp{TAGS} keyword as: + +@example +#+TAGS: @@work(w) @@home(h) @@tennisclub(t) laptop(l) pc(p) +@end example + + +The tags interface shows the available tags in a splash window. If +you want to start a new line after a specific tag, insert @samp{\n} into +the tag list + +@example +#+TAGS: @@work(w) @@home(h) @@tennisclub(t) \n laptop(l) pc(p) +@end example + + +@noindent +or write them in two lines: + +@example +#+TAGS: @@work(w) @@home(h) @@tennisclub(t) +#+TAGS: laptop(l) pc(p) +@end example + +You can also group together tags that are mutually exclusive by using +braces, as in: + +@example +#+TAGS: @{ @@work(w) @@home(h) @@tennisclub(t) @} laptop(l) pc(p) +@end example + + +@noindent +you indicate that at most one of @samp{@@work}, @samp{@@home}, and @samp{@@tennisclub} +should be selected. Multiple such groups are allowed. + +Do not forget to press @kbd{C-c C-c} with point in one of these +lines to activate any changes. + +To set these mutually exclusive groups in the variable +@code{org-tags-alist}, you must use the dummy tags @code{:startgroup} and +@code{:endgroup} instead of the braces. Similarly, you can use @code{:newline} +to indicate a line break. The previous example would be set globally +by the following configuration: + +@lisp +(setq org-tag-alist '((:startgroup . nil) + ("@@work" . ?w) ("@@home" . ?h) + ("@@tennisclub" . ?t) + (:endgroup . nil) + ("laptop" . ?l) ("pc" . ?p))) +@end lisp + +If at least one tag has a selection key then pressing @kbd{C-c C-c} automatically presents you with a special interface, listing +inherited tags, the tags of the current headline, and a list of all +valid tags with corresponding keys@footnote{Keys are automatically assigned to tags that have no +configured keys.}. + +Pressing keys assigned to tags adds or removes them from the list of +tags in the current line. Selecting a tag in a group of mutually +exclusive tags turns off any other tag from that group. + +In this interface, you can also use the following special keys: + +@table @asis +@item @kbd{@key{TAB}} +@kindex TAB +Enter a tag in the minibuffer, even if the tag is not in the +predefined list. You can complete on all tags present in the buffer +and globally pre-defined tags from @code{org-tag-alist} and +@code{org-tag-persistent-alist}. You can also add several tags: just +separate them with a comma. + +@item @kbd{@key{SPC}} +@kindex SPC +Clear all tags for this line. + +@item @kbd{@key{RET}} +@kindex RET +Accept the modified set. + +@item @kbd{C-g} +@kindex C-g +Abort without installing changes. + +@item @kbd{q} +@kindex q +If @kbd{q} is not assigned to a tag, it aborts like +@kbd{C-g}. + +@item @kbd{!} +@kindex ! +Turn off groups of mutually exclusive tags. Use this to (as an +exception) assign several tags from such a group. + +@item @kbd{C-c} +@kindex C-c C-c +Toggle auto-exit after the next change (see below). If you are +using expert mode, the first @kbd{C-c} displays the selection +window. +@end table + +This method lets you assign tags to a headline with very few keys. +With the above setup, you could clear the current tags and set +@samp{@@home}, @samp{laptop} and @samp{pc} tags with just the following keys: +@kbd{C-c C-c @key{SPC} h l p @key{RET}}. Switching from @samp{@@home} to @samp{@@work} +would be done with @kbd{C-c C-c w @key{RET}} or alternatively with +@kbd{C-c C-c C-c w}. Adding the non-predefined tag @samp{sarah} could +be done with @kbd{C-c C-c @key{TAB} s a r a h @key{RET}}. + +@vindex org-fast-tag-selection-single-key +If you find that most of the time you need only a single key press to +modify your list of tags, set the variable +@code{org-fast-tag-selection-single-key}. Then you no longer have to press +@kbd{@key{RET}} to exit fast tag selection---it exits after the first +change. If you then occasionally need more keys, press @kbd{C-c} +to turn off auto-exit for the current tag selection process (in +effect: start selection with @kbd{C-c C-c C-c} instead of +@kbd{C-c C-c}). If you set the variable to the value @code{expert}, +the special window is not even shown for single-key tag selection, it +comes up only when you press an extra @kbd{C-c}. + +@node Tag Hierarchy +@section Tag Hierarchy + +@cindex group tags +@cindex tags, groups +@cindex tags hierarchy + +Tags can be defined in hierarchies. A tag can be defined as a @emph{group +tag} for a set of other tags. The group tag can be seen as the +``broader term'' for its set of tags. Defining multiple group tags and +nesting them creates a tag hierarchy. + +One use-case is to create a taxonomy of terms (tags) that can be used +to classify nodes in a document or set of documents. + +When you search for a group tag, it return matches for all members in +the group and its subgroups. In an agenda view, filtering by a group +tag displays or hide headlines tagged with at least one of the members +of the group or any of its subgroups. This makes tag searches and +filters even more flexible. + +You can set group tags by using brackets and inserting a colon between +the group tag and its related tags---beware that all whitespaces are +mandatory so that Org can parse this line correctly: + +@example +#+TAGS: [ GTD : Control Persp ] +@end example + + +In this example, @samp{GTD} is the group tag and it is related to two other +tags: @samp{Control}, @samp{Persp}. Defining @samp{Control} and @samp{Persp} as group +tags creates a hierarchy of tags: + +@example +#+TAGS: [ Control : Context Task ] +#+TAGS: [ Persp : Vision Goal AOF Project ] +@end example + +That can conceptually be seen as a hierarchy of tags: + +@itemize +@item +@samp{GTD} +@itemize +@item +@samp{Persp} +@itemize +@item +@samp{Vision} +@item +@samp{Goal} +@item +@samp{AOF} +@item +@samp{Project} +@end itemize +@item +@samp{Control} +@itemize +@item +@samp{Context} +@item +@samp{Task} +@end itemize +@end itemize +@end itemize + +You can use the @code{:startgrouptag}, @code{:grouptags} and @code{:endgrouptag} +keyword directly when setting @code{org-tag-alist} directly: + +@lisp +(setq org-tag-alist '((:startgrouptag) + ("GTD") + (:grouptags) + ("Control") + ("Persp") + (:endgrouptag) + (:startgrouptag) + ("Control") + (:grouptags) + ("Context") + ("Task") + (:endgrouptag))) +@end lisp + +The tags in a group can be mutually exclusive if using the same group +syntax as is used for grouping mutually exclusive tags together; using +curly brackets. + +@example +#+TAGS: @{ Context : @@Home @@Work @@Call @} +@end example + + +When setting @code{org-tag-alist} you can use @code{:startgroup} and @code{:endgroup} +instead of @code{:startgrouptag} and @code{:endgrouptag} to make the tags +mutually exclusive. + +Furthermore, the members of a group tag can also be regular +expressions, creating the possibility of a more dynamic and rule-based +tag structure (see @ref{Regular Expressions}). The regular expressions in +the group must be specified within curly brackets. Here is an +expanded example: + +@example +#+TAGS: [ Vision : @{V@@.+@} ] +#+TAGS: [ Goal : @{G@@.+@} ] +#+TAGS: [ AOF : @{AOF@@.+@} ] +#+TAGS: [ Project : @{P@@.+@} ] +@end example + +Searching for the tag @samp{Project} now lists all tags also including +regular expression matches for @samp{P@@.+}, and similarly for tag searches +on @samp{Vision}, @samp{Goal} and @samp{AOF}. For example, this would work well for +a project tagged with a common project-identifier, e.g., +@samp{P@@2014_OrgTags}. + +@kindex C-c C-x q +@findex org-toggle-tags-groups +@vindex org-group-tags +If you want to ignore group tags temporarily, toggle group tags +support with @code{org-toggle-tags-groups}, bound to @kbd{C-c C-x q}. +If you want to disable tag groups completely, set @code{org-group-tags} to +@code{nil}. + +@node Tag Searches +@section Tag Searches + +@cindex tag searches +@cindex searching for tags + +Once a system of tags has been set up, it can be used to collect +related information into special lists. + +@table @asis +@item @kbd{C-c / m} or @kbd{C-c \} (@code{org-match-sparse-tree}) +@kindex C-c / m +@kindex C-c \ +@findex org-match-sparse-tree +Create a sparse tree with all headlines matching a tags search. +With a @kbd{C-u} prefix argument, ignore headlines that are not +a TODO line. + +@item @kbd{M-x org-agenda m} (@code{org-tags-view}) +@kindex m @r{(Agenda dispatcher)} +@findex org-tags-view +Create a global list of tag matches from all agenda files. See +@ref{Matching tags and properties}. + +@item @kbd{M-x org-agenda M} (@code{org-tags-view}) +@kindex M @r{(Agenda dispatcher)} +@vindex org-tags-match-list-sublevels +Create a global list of tag matches from all agenda files, but check +only TODO items and force checking subitems (see the option +@code{org-tags-match-list-sublevels}). +@end table + +These commands all prompt for a match string which allows basic +Boolean logic like @samp{+boss+urgent-project1}, to find entries with tags +@samp{boss} and @samp{urgent}, but not @samp{project1}, or @samp{Kathy|Sally} to find +entries which are tagged, like @samp{Kathy} or @samp{Sally}. The full syntax of +the search string is rich and allows also matching against TODO +keywords, entry levels and properties. For a complete description +with many examples, see @ref{Matching tags and properties}. + +@node Properties and Columns +@chapter Properties and Columns + +@cindex properties + +A property is a key-value pair associated with an entry. Properties +can be set so they are associated with a single entry, with every +entry in a tree, or with the whole buffer. + +There are two main applications for properties in Org mode. First, +properties are like tags, but with a value. Imagine maintaining +a file where you document bugs and plan releases for a piece of +software. Instead of using tags like @samp{release_1}, @samp{release_2}, you +can use a property, say @samp{Release}, that in different subtrees has +different values, such as @samp{1.0} or @samp{2.0}. Second, you can use +properties to implement (very basic) database capabilities in an Org +buffer. Imagine keeping track of your music CDs, where properties +could be things such as the album, artist, date of release, number of +tracks, and so on. + +Properties can be conveniently edited and viewed in column view (see +@ref{Column View}). + +@menu +* Property Syntax:: How properties are spelled out. +* Special Properties:: Access to other Org mode features. +* Property Searches:: Matching property values. +* Property Inheritance:: Passing values down a tree. +* Column View:: Tabular viewing and editing. +@end menu + +@node Property Syntax +@section Property Syntax + +@cindex property syntax +@cindex drawer, for properties + +Properties are key--value pairs. When they are associated with +a single entry or with a tree they need to be inserted into a special +drawer (see @ref{Drawers}) with the name @samp{PROPERTIES}, which has to be +located right below a headline, and its planning line (see @ref{Deadlines and Scheduling}) when applicable. Each property is specified on +a single line, with the key---surrounded by colons---first, and the +value after it. Keys are case-insensitive. Here is an example: + +@example +* CD collection +** Classic +*** Goldberg Variations + :PROPERTIES: + :Title: Goldberg Variations + :Composer: J.S. Bach + :Artist: Glenn Gould + :Publisher: Deutsche Grammophon + :NDisks: 1 + :END: +@end example + +Depending on the value of @code{org-use-property-inheritance}, a property +set this way is associated either with a single entry, or with the +sub-tree defined by the entry, see @ref{Property Inheritance}. + +You may define the allowed values for a particular property @samp{Xyz} by +setting a property @samp{Xyz_ALL}. This special property is @emph{inherited}, +so if you set it in a level 1 entry, it applies to the entire tree. +When allowed values are defined, setting the corresponding property +becomes easier and is less prone to typing errors. For the example +with the CD collection, we can pre-define publishers and the number of +disks in a box like this: + +@example +* CD collection + :PROPERTIES: + :NDisks_ALL: 1 2 3 4 + :Publisher_ALL: "Deutsche Grammophon" Philips EMI + :END: +@end example + +Properties can be inserted on buffer level. That means they apply +before the first headline and can be inherited by all entries in a +file. Property blocks defined before first headline needs to be +located at the top of the buffer, allowing only comments above. + +Properties can also be defined using lines like: + +@cindex @samp{_ALL} suffix, in properties +@cindex @samp{PROPERTY}, keyword +@example +#+PROPERTY: NDisks_ALL 1 2 3 4 +@end example + + +@cindex @samp{+} suffix, in properties +If you want to add to the value of an existing property, append a @samp{+} +to the property name. The following results in the property @samp{var} +having the value @samp{foo=1 bar=2}. + +@example +#+PROPERTY: var foo=1 +#+PROPERTY: var+ bar=2 +@end example + +It is also possible to add to the values of inherited properties. The +following results in the @samp{Genres} property having the value @samp{Classic +Baroque} under the @samp{Goldberg Variations} subtree. + +@example +* CD collection +** Classic + :PROPERTIES: + :Genres: Classic + :END: +*** Goldberg Variations + :PROPERTIES: + :Title: Goldberg Variations + :Composer: J.S. Bach + :Artist: Glenn Gould + :Publisher: Deutsche Grammophon + :NDisks: 1 + :Genres+: Baroque + :END: +@end example + +Note that a property can only have one entry per drawer. + +@vindex org-global-properties +Property values set with the global variable @code{org-global-properties} +can be inherited by all entries in all Org files. + +The following commands help to work with properties: + +@table @asis +@item @kbd{M-@key{TAB}} (@code{pcomplete}) +@kindex M-TAB +@findex pcomplete +After an initial colon in a line, complete property keys. All keys +used in the current file are offered as possible completions. + +@item @kbd{C-c C-x p} (@code{org-set-property}) +@kindex C-c C-x p +@findex org-set-property +Set a property. This prompts for a property name and a value. If +necessary, the property drawer is created as well. + +@item @kbd{C-u M-x org-insert-drawer} +@findex org-insert-drawer +Insert a property drawer into the current entry. The drawer is +inserted early in the entry, but after the lines with planning +information like deadlines. If before first headline the drawer is +inserted at the top of the drawer after any potential comments. + +@item @kbd{C-c C-c} (@code{org-property-action}) +@kindex C-c C-c +@findex org-property-action +With point in a property drawer, this executes property commands. + +@item @kbd{C-c C-c s} (@code{org-set-property}) +@kindex C-c C-c s +@findex org-set-property +Set a property in the current entry. Both the property and the +value can be inserted using completion. + +@item @kbd{S-@key{RIGHT}} (@code{org-property-next-allowed-values}) +@itemx @kbd{S-@key{LEFT}} (@code{org-property-previous-allowed-value}) +@kindex S-RIGHT +@kindex S-LEFT +Switch property at point to the next/previous allowed value. + +@item @kbd{C-c C-c d} (@code{org-delete-property}) +@kindex C-c C-c d +@findex org-delete-property +Remove a property from the current entry. + +@item @kbd{C-c C-c D} (@code{org-delete-property-globally}) +@kindex C-c C-c D +@findex org-delete-property-globally +Globally remove a property, from all entries in the current file. + +@item @kbd{C-c C-c c} (@code{org-compute-property-at-point}) +@kindex C-c C-c c +@findex org-compute-property-at-point +Compute the property at point, using the operator and scope from the +nearest column format definition. +@end table + +@node Special Properties +@section Special Properties + +@cindex properties, special + +Special properties provide an alternative access method to Org mode +features, like the TODO state or the priority of an entry, discussed +in the previous chapters. This interface exists so that you can +include these states in a column view (see @ref{Column View}), or to use +them in queries. The following property names are special and should +not be used as keys in the properties drawer: + +@cindex @samp{ALLTAGS}, special property +@cindex @samp{BLOCKED}, special property +@cindex @samp{CLOCKSUM}, special property +@cindex @samp{CLOCKSUM_T}, special property +@cindex @samp{CLOSED}, special property +@cindex @samp{DEADLINE}, special property +@cindex @samp{FILE}, special property +@cindex @samp{ITEM}, special property +@cindex @samp{PRIORITY}, special property +@cindex @samp{SCHEDULED}, special property +@cindex @samp{TAGS}, special property +@cindex @samp{TIMESTAMP}, special property +@cindex @samp{TIMESTAMP_IA}, special property +@cindex @samp{TODO}, special property +@multitable {aaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{ALLTAGS} +@tab All tags, including inherited ones. +@item @samp{BLOCKED} +@tab @code{t} if task is currently blocked by children or siblings. +@item @samp{CATEGORY} +@tab The category of an entry. +@item @samp{CLOCKSUM} +@tab The sum of CLOCK intervals in the subtree. @code{org-clock-sum} +@item +@tab must be run first to compute the values in the current buffer. +@item @samp{CLOCKSUM_T} +@tab The sum of CLOCK intervals in the subtree for today. +@item +@tab @code{org-clock-sum-today} must be run first to compute the +@item +@tab values in the current buffer. +@item @samp{CLOSED} +@tab When was this entry closed? +@item @samp{DEADLINE} +@tab The deadline timestamp. +@item @samp{FILE} +@tab The filename the entry is located in. +@item @samp{ITEM} +@tab The headline of the entry. +@item @samp{PRIORITY} +@tab The priority of the entry, a string with a single letter. +@item @samp{SCHEDULED} +@tab The scheduling timestamp. +@item @samp{TAGS} +@tab The tags defined directly in the headline. +@item @samp{TIMESTAMP} +@tab The first keyword-less timestamp in the entry. +@item @samp{TIMESTAMP_IA} +@tab The first inactive timestamp in the entry. +@item @samp{TODO} +@tab The TODO keyword of the entry. +@end multitable + +@node Property Searches +@section Property Searches + +@cindex properties, searching +@cindex searching, of properties + +To create sparse trees and special lists with selection based on +properties, the same commands are used as for tag searches (see @ref{Tag Searches}). + +@table @asis +@item @kbd{C-c / m} or @kbd{C-c \} (@code{org-match-sparse-tree}) +@kindex C-c / m +@kindex C-c \ +@findex org-match-sparse-tree +Create a sparse tree with all matching entries. With +a @kbd{C-u} prefix argument, ignore headlines that are not +a TODO line. + +@item @kbd{M-x org-agenda m} (@code{org-tags-view}) +@kindex m @r{(Agenda dispatcher)} +@findex org-tags-view +Create a global list of tag/property matches from all agenda files. + +@item @kbd{M-x org-agenda M} (@code{org-tags-view}) +@kindex M @r{(Agenda dispatcher)} +@vindex org-tags-match-list-sublevels +Create a global list of tag matches from all agenda files, but check +only TODO items and force checking of subitems (see the option +@code{org-tags-match-list-sublevels}). +@end table + +The syntax for the search string is described in @ref{Matching tags and properties}. + +There is also a special command for creating sparse trees based on a +single property: + +@table @asis +@item @kbd{C-c / p} +@kindex C-c / p +Create a sparse tree based on the value of a property. This first +prompts for the name of a property, and then for a value. A sparse +tree is created with all entries that define this property with the +given value. If you enclose the value in curly braces, it is +interpreted as a regular expression and matched against the property +values (see @ref{Regular Expressions}). +@end table + +@node Property Inheritance +@section Property Inheritance + +@cindex properties, inheritance +@cindex inheritance, of properties + +@vindex org-use-property-inheritance +The outline structure of Org documents lends itself to an inheritance +model of properties: if the parent in a tree has a certain property, +the children can inherit this property. Org mode does not turn this +on by default, because it can slow down property searches +significantly and is often not needed. However, if you find +inheritance useful, you can turn it on by setting the variable +@code{org-use-property-inheritance}. It may be set to @code{t} to make all +properties inherited from the parent, to a list of properties that +should be inherited, or to a regular expression that matches inherited +properties. If a property has the value @code{nil}, this is interpreted as +an explicit un-define of the property, so that inheritance search +stops at this value and returns @code{nil}. + +Org mode has a few properties for which inheritance is hard-coded, at +least for the special applications for which they are used: + +@table @asis +@item @code{COLUMNS} +@cindex @samp{COLUMNS}, property +The @samp{COLUMNS} property defines the format of column view (see +@ref{Column View}). It is inherited in the sense that the level where +a @samp{COLUMNS} property is defined is used as the starting point for +a column view table, independently of the location in the subtree +from where columns view is turned on. + +@item @code{CATEGORY} +@cindex @samp{CATEGORY}, property +For agenda view, a category set through a @samp{CATEGORY} property +applies to the entire subtree. + +@item @code{ARCHIVE} +@cindex @samp{ARCHIVE}, property +For archiving, the @samp{ARCHIVE} property may define the archive +location for the entire subtree (see @ref{Moving subtrees}). + +@item @code{LOGGING} +@cindex @samp{LOGGING}, property +The @samp{LOGGING} property may define logging settings for an entry or +a subtree (see @ref{Tracking TODO state changes}). +@end table + +@node Column View +@section Column View + +A great way to view and edit properties in an outline tree is @emph{column +view}. In column view, each outline node is turned into a table row. +Columns in this table provide access to properties of the entries. +Org mode implements columns by overlaying a tabular structure over the +headline of each item. While the headlines have been turned into +a table row, you can still change the visibility of the outline tree. +For example, you get a compact table by switching to ``contents'' +view---@kbd{S-@key{TAB}} @kbd{S-@key{TAB}}, or simply @kbd{c} +while column view is active---but you can still open, read, and edit +the entry below each headline. Or, you can switch to column view +after executing a sparse tree command and in this way get a table only +for the selected items. Column view also works in agenda buffers (see +@ref{Agenda Views}) where queries have collected selected items, possibly +from a number of files. + +@menu +* Defining columns:: The COLUMNS format property. +* Using column view:: How to create and use column view. +* Capturing column view:: A dynamic block for column view. +@end menu + +@node Defining columns +@subsection Defining columns + +@cindex column view, for properties +@cindex properties, column view + +Setting up a column view first requires defining the columns. This is +done by defining a column format line. + +@menu +* Scope of column definitions:: Where defined, where valid? +* Column attributes:: Appearance and content of a column. +@end menu + +@node Scope of column definitions +@subsubsection Scope of column definitions + +To specify a format that only applies to a specific tree, add +a @samp{COLUMNS} property to the top node of that tree, for example: + +@example +** Top node for columns view + :PROPERTIES: + :COLUMNS: %25ITEM %TAGS %PRIORITY %TODO + :END: +@end example + +A @samp{COLUMNS} property within a property drawer before first headline +will apply to the entire file. As an addition to property drawers, +keywords can also be defined for an entire file using a line like: + +@cindex @samp{COLUMNS}, keyword +@example +#+COLUMNS: %25ITEM %TAGS %PRIORITY %TODO +@end example + + +If a @samp{COLUMNS} property is present in an entry, it defines columns for +the entry itself, and for the entire subtree below it. Since the +column definition is part of the hierarchical structure of the +document, you can define columns on level 1 that are general enough +for all sublevels, and more specific columns further down, when you +edit a deeper part of the tree. + +@node Column attributes +@subsubsection Column attributes + +A column definition sets the attributes of a column. The general +definition looks like this: + +@example +%[WIDTH]PROPERTY[(TITLE)][@{SUMMARY-TYPE@}] +@end example + + +@noindent +Except for the percent sign and the property name, all items are +optional. The individual parts have the following meaning: + +@table @asis +@item @var{WIDTH} +An integer specifying the width of the column in characters. If +omitted, the width is determined automatically. + +@item @var{PROPERTY} +The property that should be edited in this column. Special +properties representing meta data are allowed here as well (see +@ref{Special Properties}). + +@item @var{TITLE} +The header text for the column. If omitted, the property name is +used. + +@item @var{SUMMARY-TYPE} +The summary type. If specified, the column values for parent nodes +are computed from the children@footnote{If more than one summary type applies to the same property, +the parent values are computed according to the first of them.}. + +Supported summary types are: + +@multitable {aaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{+} +@tab Sum numbers in this column. +@item @samp{+;%.1f} +@tab Like @samp{+}, but format result with @samp{%.1f}. +@item @samp{$} +@tab Currency, short for @samp{+;%.2f}. +@item @samp{min} +@tab Smallest number in column. +@item @samp{max} +@tab Largest number. +@item @samp{mean} +@tab Arithmetic mean of numbers. +@item @samp{X} +@tab Checkbox status, @samp{[X]} if all children are @samp{[X]}. +@item @samp{X/} +@tab Checkbox status, @samp{[n/m]}. +@item @samp{X%} +@tab Checkbox status, @samp{[n%]}. +@item @samp{:} +@tab Sum times, HH:MM, plain numbers are minutes. +@item @samp{:min} +@tab Smallest time value in column. +@item @samp{:max} +@tab Largest time value. +@item @samp{:mean} +@tab Arithmetic mean of time values. +@item @samp{@@min} +@tab Minimum age@footnote{An age can be defined as a duration, using units defined in +@code{org-duration-units}, e.g., @samp{3d 1h}. If any value in the column is as +such, the summary is also expressed as a duration.} (in days/hours/mins/seconds). +@item @samp{@@max} +@tab Maximum age (in days/hours/mins/seconds). +@item @samp{@@mean} +@tab Arithmetic mean of ages (in days/hours/mins/seconds). +@item @samp{est+} +@tab Add low-high estimates. +@end multitable + +@vindex org-columns-summary-types +You can also define custom summary types by setting +@code{org-columns-summary-types}. +@end table + +The @samp{est+} summary type requires further explanation. It is used for +combining estimates, expressed as low-high ranges. For example, +instead of estimating a particular task will take 5 days, you might +estimate it as 5--6 days if you're fairly confident you know how much +work is required, or 1--10 days if you do not really know what needs +to be done. Both ranges average at 5.5 days, but the first represents +a more predictable delivery. + +When combining a set of such estimates, simply adding the lows and +highs produces an unrealistically wide result. Instead, @samp{est+} adds +the statistical mean and variance of the subtasks, generating a final +estimate from the sum. For example, suppose you had ten tasks, each +of which was estimated at 0.5 to 2 days of work. Straight addition +produces an estimate of 5 to 20 days, representing what to expect if +everything goes either extremely well or extremely poorly. In +contrast, @samp{est+} estimates the full job more realistically, at 10--15 +days. + +Here is an example for a complete columns definition, along with +allowed values@footnote{Please note that the @samp{COLUMNS} definition must be on a single +line; it is wrapped here only because of formatting constraints.}. + +@example +:COLUMNS: %25ITEM %9Approved(Approved?)@{X@} %Owner %11Status \ + %10Time_Estimate@{:@} %CLOCKSUM %CLOCKSUM_T +:Owner_ALL: Tammy Mark Karl Lisa Don +:Status_ALL: "In progress" "Not started yet" "Finished" "" +:Approved_ALL: "[ ]" "[X]" +@end example + +@noindent +The first column, @samp{%25ITEM}, means the first 25 characters of the item +itself, i.e., of the headline. You probably always should start the +column definition with the @samp{ITEM} specifier. The other specifiers +create columns @samp{Owner} with a list of names as allowed values, for +@samp{Status} with four different possible values, and for a checkbox field +@samp{Approved}. When no width is given after the @samp{%} character, the +column is exactly as wide as it needs to be in order to fully display +all values. The @samp{Approved} column does have a modified title +(@samp{Approved?}, with a question mark). Summaries are created for the +@samp{Time_Estimate} column by adding time duration expressions like HH:MM, +and for the @samp{Approved} column, by providing an @samp{[X]} status if all +children have been checked. The @samp{CLOCKSUM} and @samp{CLOCKSUM_T} columns +are special, they lists the sums of CLOCK intervals in the subtree, +either for all clocks or just for today. + +@node Using column view +@subsection Using column view + + + +@anchor{Turning column view on or off} +@subsubheading Turning column view on or off + +@table @asis +@item @kbd{C-c C-x C-c} (@code{org-columns}) +@kindex C-c C-x C-c +@vindex org-columns +@vindex org-columns-default-format +Turn on column view. If point is before the first headline in the +file, column view is turned on for the entire file, using the +@samp{#+COLUMNS} definition. If point is somewhere inside the outline, +this command searches the hierarchy, up from point, for a @samp{COLUMNS} +property that defines a format. When one is found, the column view +table is established for the tree starting at the entry that +contains the @samp{COLUMNS} property. If no such property is found, the +format is taken from the @samp{#+COLUMNS} line or from the variable +@code{org-columns-default-format}, and column view is established for the +current entry and its subtree. + +@item @kbd{r} or @kbd{g} on a columns view line (@code{org-columns-redo}) +@kindex r +@kindex g +@findex org-columns-redo +Recreate the column view, to include recent changes made in the +buffer. + +@item @kbd{C-c C-c} or @kbd{q} on a columns view line (@code{org-columns-quit}) +@kindex q +@kindex C-c C-c +@findex org-columns-quit +Exit column view. +@end table + +@anchor{Editing values} +@subsubheading Editing values + +@table @asis +@item @kbd{@key{LEFT}}, @kbd{@key{RIGHT}}, @kbd{@key{UP}}, @kbd{@key{DOWN}} +Move through the column view from field to field. + +@item @kbd{1..9,0} +@kindex 1..9,0 +Directly select the Nth allowed value, @kbd{0} selects the +10th value. + +@item @kbd{n} or @kbd{S-@key{RIGHT}} (@code{org-columns-next-allowed-value}) +@itemx @kbd{p} or @kbd{S-@key{LEFT}} (@code{org-columns-previous-allowed-value}) +@kindex n +@kindex S-RIGHT +@kindex p +@kindex S-LEFT +@findex org-columns-next-allowed-value +@findex org-columns-previous-allowed-value +Switch to the next/previous allowed value of the field. For this, +you have to have specified allowed values for a property. + +@item @kbd{e} (@code{org-columns-edit-value}) +@kindex e +@findex org-columns-edit-value +Edit the property at point. For the special properties, this +invokes the same interface that you normally use to change that +property. For example, the tag completion or fast selection +interface pops up when editing a @samp{TAGS} property. + +@item @kbd{C-c C-c} (@code{org-columns-toggle-or-columns-quit}) +@kindex C-c C-c +@findex org-columns-toggle-or-columns-quit +When there is a checkbox at point, toggle it. Else exit column +view. + +@item @kbd{v} (@code{org-columns-show-value}) +@kindex v +@findex org-columns-show-value +View the full value of this property. This is useful if the width +of the column is smaller than that of the value. + +@item @kbd{a} (@code{org-columns-edit-allowed}) +@kindex a +@findex org-columns-edit-allowed +Edit the list of allowed values for this property. If the list is +found in the hierarchy, the modified values is stored there. If no +list is found, the new value is stored in the first entry that is +part of the current column view. +@end table + +@anchor{Modifying column view on-the-fly} +@subsubheading Modifying column view on-the-fly + +@table @asis +@item @kbd{<} (@code{org-columns-narrow}) +@itemx @kbd{>} (@code{org-columns-widen}) +@kindex < +@kindex > +@findex org-columns-narrow +@findex org-columns-widen +Make the column narrower/wider by one character. + +@item @kbd{S-M-@key{RIGHT}} (@code{org-columns-new}) +@kindex S-M-RIGHT +@findex org-columns-new +Insert a new column, to the left of the current column. + +@item @kbd{S-M-@key{LEFT}} (@code{org-columns-delete}) +@kindex S-M-LEFT +@findex org-columns-delete +Delete the current column. +@end table + +@node Capturing column view +@subsection Capturing column view + +Since column view is just an overlay over a buffer, it cannot be +exported or printed directly. If you want to capture a column view, +use a @samp{columnview} dynamic block (see @ref{Dynamic Blocks}). The frame of +this block looks like this: + +@cindex @samp{BEGIN columnview} +@example +* The column view +#+BEGIN: columnview :hlines 1 :id "label" + +#+END: +@end example + +This dynamic block has the following parameters: + +@table @asis +@item @samp{:id} +This is the most important parameter. Column view is a feature that +is often localized to a certain (sub)tree, and the capture block +might be at a different location in the file. To identify the tree +whose view to capture, you can use four values: + +@table @asis +@item @samp{local} +Use the tree in which the capture block is located. + +@item @samp{global} +Make a global view, including all headings in the file. + +@item @samp{file:FILENAME} +Run column view at the top of the @var{FILENAME} file. + +@item @samp{LABEL} +@cindex @samp{ID}, property +Call column view in the tree that has an @samp{ID} property with the +value @var{LABEL}. You can use @kbd{M-x org-id-copy} to +create a globally unique ID for the current entry and copy it to +the kill-ring. +@end table + +@item @samp{:match} +When set to a string, use this as a tags/property match filter to +select only a subset of the headlines in the scope set by the @code{:id} +parameter. +@end table + + +@table @asis +@item @samp{:hlines} +When @code{t}, insert an hline after every line. When a number N, insert +an hline before each headline with level @code{<= N}. + +@item @samp{:vlines} +When non-@code{nil}, force column groups to get vertical lines. + +@item @samp{:maxlevel} +When set to a number, do not capture entries below this level. + +@item @samp{:skip-empty-rows} +When non-@code{nil}, skip rows where the only non-empty specifier of +the column view is @samp{ITEM}. + +@item @samp{:exclude-tags} +List of tags to exclude from column view table: entries with these +tags will be excluded from the column view. + +@item @samp{:indent} +When non-@code{nil}, indent each @samp{ITEM} field according to its level. + +@item @samp{:format} +Specify a column attribute (see @ref{Column attributes}) for the dynamic +block. +@end table + +The following commands insert or update the dynamic block: + +@table @asis +@item @code{org-columns-insert-dblock} +@kindex C-c C-x x +@findex org-columns-insert-dblock +Insert a dynamic block capturing a column view. Prompt for the +scope or ID of the view. + +This command can be invoked by calling +@code{org-dynamic-block-insert-dblock} (@kbd{C-c C-x x}) and +selecting ``columnview'' (see @ref{Dynamic Blocks}). + +@item @kbd{C-c C-c} @kbd{C-c C-x C-u} (@code{org-dblock-update}) +@kindex C-c C-c +@kindex C-c C-x C-u +@findex org-dblock-update +Update dynamic block at point. point needs to be in the @samp{#+BEGIN} +line of the dynamic block. + +@item @kbd{C-u C-c C-x C-u} (@code{org-update-all-dblocks}) +@kindex C-u C-c C-x C-u +Update all dynamic blocks (see @ref{Dynamic Blocks}). This is useful if +you have several clock table blocks, column-capturing blocks or +other dynamic blocks in a buffer. +@end table + +You can add formulas to the column view table and you may add plotting +instructions in front of the table---these survive an update of the +block. If there is a @samp{TBLFM} keyword after the table, the table is +recalculated automatically after an update. + +An alternative way to capture and process property values into a table +is provided by Eric Schulte's @samp{org-collector.el}, which is a package +in @samp{org-contrib}@footnote{Contributed packages are not part of Emacs, but are +distributed with the main distribution of Org---visit +@uref{https://orgmode.org}.}. It provides a general API to collect +properties from entries in a certain scope, and arbitrary Lisp +expressions to process these values before inserting them into a table +or a dynamic block. + +@node Dates and Times +@chapter Dates and Times + +@cindex dates +@cindex times +@cindex timestamp +@cindex date stamp + +To assist project planning, TODO items can be labeled with a date +and/or a time. The specially formatted string carrying the date and +time information is called a @emph{timestamp} in Org mode. This may be +a little confusing because timestamp is often used as indicating when +something was created or last changed. However, in Org mode this term +is used in a much wider sense. + +@menu +* Timestamps:: Assigning a time to a tree entry. +* Creating Timestamps:: Commands to insert timestamps. +* Deadlines and Scheduling:: Planning your work. +* Clocking Work Time:: Tracking how long you spend on a task. +* Effort Estimates:: Planning work effort in advance. +* Timers:: Notes with a running timer. +@end menu + +@node Timestamps +@section Timestamps + +@cindex timestamps +@cindex ranges, time +@cindex date stamps +@cindex deadlines +@cindex scheduling + +A timestamp is a specification of a date (possibly with a time or +a range of times) in a special format, either @samp{<2003-09-16 Tue>} or +@samp{<2003-09-16 Tue 09:39>} or @samp{<2003-09-16 Tue 12:00-12:30>}@footnote{The Org date format is inspired by the standard ISO 8601 +date/time format. To use an alternative format, see @ref{Custom time format}. The day name is optional when you type the date yourself. +However, any date inserted or modified by Org adds that day name, for +reading convenience.}. +A timestamp can appear anywhere in the headline or body of an Org tree +entry. Its presence causes entries to be shown on specific dates in +the agenda (see @ref{Weekly/daily agenda}). We distinguish: + +@table @asis +@item Plain timestamp; Event; Appointment +@cindex timestamp +@cindex appointment +A simple timestamp just assigns a date/time to an item. This is +just like writing down an appointment or event in a paper agenda. +In the agenda display, the headline of an entry associated with +a plain timestamp is shown exactly on that date. + +@example +* Meet Peter at the movies + <2006-11-01 Wed 19:15> +* Discussion on climate change + <2006-11-02 Thu 20:00-22:00> +@end example + +@item Timestamp with repeater interval +@cindex timestamp, with repeater interval +A timestamp may contain a @emph{repeater interval}, indicating that it +applies not only on the given date, but again and again after +a certain interval of N days (d), weeks (w), months (m), or years +(y). The following shows up in the agenda every Wednesday: + +@example +* Pick up Sam at school + <2007-05-16 Wed 12:30 +1w> +@end example + +@item Diary-style expression entries +@cindex diary style timestamps +@cindex sexp timestamps +For more complex date specifications, Org mode supports using the +special expression diary entries implemented in the Emacs Calendar +package@footnote{When working with the standard diary expression functions, you +need to be very careful with the order of the arguments. That order +depends evilly on the variable @code{calendar-date-style}. For example, to +specify a date December 12, 2005, the call might look like +@samp{(diary-date 12 1 2005)} or @samp{(diary-date 1 12 2005)} or @samp{(diary-date +2005 12 1)}, depending on the settings. This has been the source of +much confusion. Org mode users can resort to special versions of +these functions like @code{org-date} or @code{org-anniversary}. These work just +like the corresponding @code{diary-} functions, but with stable ISO order +of arguments (year, month, day) wherever applicable, independent of +the value of @code{calendar-date-style}.}. For example, with optional time: + +@example +* 22:00-23:00 The nerd meeting on every 2nd Thursday of the month + <%%(diary-float t 4 2)> +@end example + +@item Time/Date range +@cindex timerange +@cindex date range +Two timestamps connected by @samp{--} denote a range. The headline is +shown on the first and last day of the range, and on any dates that +are displayed and fall in the range. Here is an example: + +@example +** Meeting in Amsterdam + <2004-08-23 Mon>--<2004-08-26 Thu> +@end example + +@item Inactive timestamp +@cindex timestamp, inactive +@cindex inactive timestamp +Just like a plain timestamp, but with square brackets instead of +angular ones. These timestamps are inactive in the sense that they +do @emph{not} trigger an entry to show up in the agenda. + +@example +* Gillian comes late for the fifth time + [2006-11-01 Wed] +@end example +@end table + +@node Creating Timestamps +@section Creating Timestamps + +For Org mode to recognize timestamps, they need to be in the specific +format. All commands listed below produce timestamps in the correct +format. + +@table @asis +@item @kbd{C-c .} (@code{org-time-stamp}) +@kindex C-c . +@findex org-time-stamp +Prompt for a date and insert a corresponding timestamp. When point +is at an existing timestamp in the buffer, the command is used to +modify this timestamp instead of inserting a new one. When this +command is used twice in succession, a time range is inserted. + +@kindex C-u C-c . +@vindex org-time-stamp-rounding-minutes +When called with a prefix argument, use the alternative format which +contains date and time. The default time can be rounded to +multiples of 5 minutes. See the option +@code{org-time-stamp-rounding-minutes}. + +@kindex C-u C-u C-c . +With two prefix arguments, insert an active timestamp with the +current time without prompting. + +@item @kbd{C-c !} (@code{org-time-stamp-inactive}) +@kindex C-c ! +@kindex C-u C-c ! +@kindex C-u C-u C-c ! +@findex org-time-stamp-inactive +Like @kbd{C-c .}, but insert an inactive timestamp that does +not cause an agenda entry. + +@item @kbd{C-c C-c} +@kindex C-c C-c +Normalize timestamp, insert or fix day name if missing or wrong. + +@item @kbd{C-c <} (@code{org-date-from-calendar}) +@kindex C-c < +@findex org-date-from-calendar +Insert a timestamp corresponding to point date in the calendar. + +@item @kbd{C-c >} (@code{org-goto-calendar}) +@kindex C-c > +@findex org-goto-calendar +Access the Emacs calendar for the current date. If there is +a timestamp in the current line, go to the corresponding date +instead. + +@item @kbd{C-c C-o} (@code{org-open-at-point}) +@kindex C-c C-o +@findex org-open-at-point +Access the agenda for the date given by the timestamp or -range at +point (see @ref{Weekly/daily agenda}). + +@item @kbd{S-@key{LEFT}} (@code{org-timestamp-down-day}) +@itemx @kbd{S-@key{RIGHT}} (@code{org-timestamp-up-day}) +@kindex S-LEFT +@kindex S-RIGHT +@findex org-timestamp-down-day +@findex org-timestamp-up-day +Change date at point by one day. These key bindings conflict with +shift-selection and related modes (see @ref{Conflicts}). + +@item @kbd{S-@key{UP}} (@code{org-timestamp-up}) +@itemx @kbd{S-@key{DOWN}} (@code{org-timestamp-down}) +@kindex S-UP +@kindex S-DOWN +On the beginning or enclosing bracket of a timestamp, change its +type. Within a timestamp, change the item under point. Point can +be on a year, month, day, hour or minute. When the timestamp +contains a time range like @samp{15:30-16:30}, modifying the first time +also shifts the second, shifting the time block with constant +length. To change the length, modify the second time. Note that if +point is in a headline and not at a timestamp, these same keys +modify the priority of an item (see @ref{Priorities}). The key bindings +also conflict with shift-selection and related modes (see @ref{Conflicts}). + +@item @kbd{C-c C-y} (@code{org-evaluate-time-range}) +@kindex C-c C-y +@findex org-evaluate-time-range +@cindex evaluate time range +Evaluate a time range by computing the difference between start and +end. With a prefix argument, insert result after the time range (in +a table: into the following column). +@end table + +@menu +* The date/time prompt:: How Org mode helps you enter dates and times. +* Custom time format:: Making dates look different. +@end menu + +@node The date/time prompt +@subsection The date/time prompt + +@cindex date, reading in minibuffer +@cindex time, reading in minibuffer + +@vindex org-read-date-prefer-future +When Org mode prompts for a date/time, the default is shown in default +date/time format, and the prompt therefore seems to ask for a specific +format. But it in fact accepts date/time information in a variety of +formats. Generally, the information should start at the beginning of +the string. Org mode finds whatever information is in there and +derives anything you have not specified from the @emph{default date and +time}. The default is usually the current date and time, but when +modifying an existing timestamp, or when entering the second stamp of +a range, it is taken from the stamp in the buffer. When filling in +information, Org mode assumes that most of the time you want to enter +a date in the future: if you omit the month/year and the given +day/month is @emph{before} today, it assumes that you mean a future +date@footnote{See the variable @code{org-read-date-prefer-future}. You may set +that variable to the symbol @code{time} to even make a time before now +shift the date to tomorrow.}. If the date has been automatically shifted into the +future, the time prompt shows this with @samp{(=>F)}. + +For example, let's assume that today is @strong{June 13, 2006}. Here is how +various inputs are interpreted, the items filled in by Org mode are in +@strong{bold}. + +@multitable {aaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{3-2-5} +@tab @result{} 2003-02-05 +@item @samp{2/5/3} +@tab @result{} 2003-02-05 +@item @samp{14} +@tab @result{} @strong{2006}-@strong{06}-14 +@item @samp{12} +@tab @result{} @strong{2006}-@strong{07}-12 +@item @samp{2/5} +@tab @result{} @strong{2007}-02-05 +@item @samp{Fri} +@tab @result{} nearest Friday (default date or later) +@item @samp{sep 15} +@tab @result{} @strong{2006}-09-15 +@item @samp{feb 15} +@tab @result{} @strong{2007}-02-15 +@item @samp{sep 12 9} +@tab @result{} 2009-09-12 +@item @samp{12:45} +@tab @result{} @strong{2006}-@strong{06}-@strong{13} 12:45 +@item @samp{22 sept 0:34} +@tab @result{} @strong{2006}-09-22 0:34 +@item @samp{w4} +@tab @result{} ISO week for of the current year @strong{2006} +@item @samp{2012 w4 fri} +@tab @result{} Friday of ISO week 4 in 2012 +@item @samp{2012-w04-5} +@tab @result{} Same as above +@end multitable + +Furthermore you can specify a relative date by giving, as the @emph{first} +thing in the input: a plus/minus sign, a number and a letter---@samp{h}, +@samp{d}, @samp{w}, @samp{m} or @samp{y}---to indicate a change in hours, days, weeks, +months, or years. With @samp{h} the date is relative to the current time, +with the other letters and a single plus or minus, the date is +relative to today at 00:00. With a double plus or minus, it is +relative to the default date. If instead of a single letter, you use +the abbreviation of day name, the date is the Nth such day, e.g.: + +@multitable {aaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{+0} +@tab @result{} today +@item @samp{.} +@tab @result{} today +@item @samp{+2h} +@tab @result{} two hours from now +@item @samp{+4d} +@tab @result{} four days from today +@item @samp{+4} +@tab @result{} same as +4d +@item @samp{+2w} +@tab @result{} two weeks from today +@item @samp{++5} +@tab @result{} five days from default date +@item @samp{+2tue} +@tab @result{} second Tuesday from now +@end multitable + +@vindex parse-time-months +@vindex parse-time-weekdays +The function understands English month and weekday abbreviations. If +you want to use un-abbreviated names and/or other languages, configure +the variables @code{parse-time-months} and @code{parse-time-weekdays}. + +@vindex org-read-date-force-compatible-dates +Not all dates can be represented in a given Emacs implementation. By +default Org mode forces dates into the compatibility range 1970--2037 +which works on all Emacs implementations. If you want to use dates +outside of this range, read the docstring of the variable +@code{org-read-date-force-compatible-dates}. + +You can specify a time range by giving start and end times or by +giving a start time and a duration (in HH:MM format). Use one or two +dash(es) as the separator in the former case and use @samp{+} as the +separator in the latter case, e.g.: + +@multitable {aaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaa} +@item @samp{11am-1:15pm} +@tab @result{} 11:00-13:15 +@item @samp{11h-13h15} +@tab @result{} same as above +@item @samp{11am--1:15pm} +@tab @result{} same as above +@item @samp{11am+2:15} +@tab @result{} same as above +@end multitable + +@cindex calendar, for selecting date +@vindex org-popup-calendar-for-date-prompt +Parallel to the minibuffer prompt, a calendar is popped up@footnote{If you do not need/want the calendar, configure the variable +@code{org-popup-calendar-for-date-prompt}.}. +When you exit the date prompt, either by clicking on a date in the +calendar, or by pressing @kbd{@key{RET}}, the date selected in the +calendar is combined with the information entered at the prompt. You +can control the calendar fully from the minibuffer: + +@kindex < +@kindex > +@kindex M-v +@kindex C-v +@kindex mouse-1 +@kindex S-RIGHT +@kindex S-LEFT +@kindex S-DOWN +@kindex S-UP +@kindex M-S-RIGHT +@kindex M-S-LEFT +@kindex RET +@kindex . +@kindex C-. +@multitable @columnfractions 0.25 0.55 +@item @kbd{@key{RET}} +@tab Choose date at point in calendar. +@item @kbd{mouse-1} +@tab Select date by clicking on it. +@item @kbd{S-@key{RIGHT}} +@tab One day forward. +@item @kbd{S-@key{LEFT}} +@tab One day backward. +@item @kbd{S-@key{DOWN}} +@tab One week forward. +@item @kbd{S-@key{UP}} +@tab One week backward. +@item @kbd{M-S-@key{RIGHT}} +@tab One month forward. +@item @kbd{M-S-@key{LEFT}} +@tab One month backward. +@item @kbd{>} +@tab Scroll calendar forward by one month. +@item @kbd{<} +@tab Scroll calendar backward by one month. +@item @kbd{M-v} +@tab Scroll calendar forward by 3 months. +@item @kbd{C-v} +@tab Scroll calendar backward by 3 months. +@item @kbd{C-.} +@tab Select today's date@footnote{You can also use the calendar command @kbd{.} to jump to +today's date, but if you are inserting an hour specification for your +timestamp, @kbd{.} will then insert a dot after the hour. By contrast, +@kbd{C-.} will always jump to today's date.} +@end multitable + +@vindex org-read-date-display-live +The actions of the date/time prompt may seem complex, but I assure you +they will grow on you, and you will start getting annoyed by pretty +much any other way of entering a date/time out there. To help you +understand what is going on, the current interpretation of your input +is displayed live in the minibuffer@footnote{If you find this distracting, turn off the display with +@code{org-read-date-display-live}.}. + +@node Custom time format +@subsection Custom time format + +@cindex custom date/time format +@cindex time format, custom +@cindex date format, custom + +@vindex org-display-custom-times +@vindex org-time-stamp-custom-formats +Org mode uses the standard ISO notation for dates and times as it is +defined in ISO 8601. If you cannot get used to this and require +another representation of date and time to keep you happy, you can get +it by customizing the variables @code{org-display-custom-times} and +@code{org-time-stamp-custom-formats}. + +@table @asis +@item @kbd{C-c C-x C-t} (@code{org-toggle-time-stamp-overlays}) +@kindex C-c C-x C-t +@findex org-toggle-time-stamp-overlays +Toggle the display of custom formats for dates and times. +@end table + +Org mode needs the default format for scanning, so the custom +date/time format does not @emph{replace} the default format. Instead, it +is put @emph{over} the default format using text properties. This has the +following consequences: + +@itemize +@item +You cannot place point onto a timestamp anymore, only before or +after. + +@item +The @kbd{S-@key{UP}} and @kbd{S-@key{DOWN}} keys can no longer be used +to adjust each component of a timestamp. If point is at the +beginning of the stamp, @kbd{S-@key{UP}} and @kbd{S-@key{DOWN}} change +the stamp by one day, just like @kbd{S-@key{LEFT}} +@kbd{S-@key{RIGHT}}. At the end of the stamp, change the time by one +minute. + +@item +If the timestamp contains a range of clock times or a repeater, +these are not overlaid, but remain in the buffer as they were. + +@item +When you delete a timestamp character-by-character, it only +disappears from the buffer after @emph{all} (invisible) characters +belonging to the ISO timestamp have been removed. + +@item +If the custom timestamp format is longer than the default and you +are using dates in tables, table alignment will be messed up. If +the custom format is shorter, things do work as expected. +@end itemize + +@node Deadlines and Scheduling +@section Deadlines and Scheduling + +A timestamp may be preceded by special keywords to facilitate +planning. Both the timestamp and the keyword have to be positioned +immediately after the task they refer to. + +@table @asis +@item @samp{DEADLINE} +@cindex @samp{DEADLINE} marker +Meaning: the task---most likely a TODO item, though not +necessarily---is supposed to be finished on that date. + +@vindex org-deadline-warning-days +On the deadline date, the task is listed in the agenda. In +addition, the agenda for @emph{today} carries a warning about the +approaching or missed deadline, starting @code{org-deadline-warning-days} +before the due date, and continuing until the entry is marked as +done. An example: + +@example +*** TODO write article about the Earth for the Guide + DEADLINE: <2004-02-29 Sun> + The editor in charge is [[bbdb:Ford Prefect]] +@end example + +@vindex org-agenda-skip-deadline-prewarning-if-scheduled +You can specify a different lead time for warnings for a specific +deadlines using the following syntax. Here is an example with +a warning period of 5 days @samp{DEADLINE: <2004-02-29 Sun -5d>}. This +warning is deactivated if the task gets scheduled and you set +@code{org-agenda-skip-deadline-prewarning-if-scheduled} to @code{t}. + +@item @samp{SCHEDULED} +@cindex @samp{SCHEDULED} marker +Meaning: you are planning to start working on that task on the given +date. + +@vindex org-agenda-skip-scheduled-if-done +The headline is listed under the given date@footnote{It will still be listed on that date after it has been marked +as done. If you do not like this, set the variable +@code{org-agenda-skip-scheduled-if-done}.}. In addition, +a reminder that the scheduled date has passed is present in the +compilation for @emph{today}, until the entry is marked as done, i.e., +the task is automatically forwarded until completed. + +@example +*** TODO Call Trillian for a date on New Years Eve. + SCHEDULED: <2004-12-25 Sat> +@end example + +@vindex org-scheduled-delay-days +@vindex org-agenda-skip-scheduled-delay-if-deadline +If you want to @emph{delay} the display of this task in the agenda, use +@samp{SCHEDULED: <2004-12-25 Sat -2d>}: the task is still scheduled on +the 25th but will appear two days later. In case the task contains +a repeater, the delay is considered to affect all occurrences; if +you want the delay to only affect the first scheduled occurrence of +the task, use @samp{--2d} instead. See @code{org-scheduled-delay-days} and +@code{org-agenda-skip-scheduled-delay-if-deadline} for details on how to +control this globally or per agenda. + +@quotation Important +Scheduling an item in Org mode should @emph{not} be understood in the +same way that we understand @emph{scheduling a meeting}. Setting a date +for a meeting is just a simple appointment, you should mark this +entry with a simple plain timestamp, to get this item shown on the +date where it applies. This is a frequent misunderstanding by Org +users. In Org mode, @emph{scheduling} means setting a date when you want +to start working on an action item. + +@end quotation +@end table + +You may use timestamps with repeaters in scheduling and deadline +entries. Org mode issues early and late warnings based on the +assumption that the timestamp represents the @emph{nearest instance} of the +repeater. However, the use of diary expression entries like + +@example +<%%(diary-float t 42)> +@end example + + +@noindent +in scheduling and deadline timestamps is limited. Org mode does not +know enough about the internals of each function to issue early and +late warnings. However, it shows the item on each day where the +expression entry matches. + +@menu +* Inserting deadline/schedule:: Planning items. +* Repeated tasks:: Items that show up again and again. +@end menu + +@node Inserting deadline/schedule +@subsection Inserting deadlines or schedules + +The following commands allow you to quickly insert a deadline or to +schedule an item:@footnote{The @samp{SCHEDULED} and @samp{DEADLINE} dates are inserted on the line +right below the headline. Do not put any text between this line and +the headline.} + +@table @asis +@item @kbd{C-c C-d} (@code{org-deadline}) +@kindex C-c C-d +@findex org-deadline +@vindex org-log-redeadline +Insert @samp{DEADLINE} keyword along with a stamp. The insertion happens +in the line directly following the headline. Remove any @samp{CLOSED} +timestamp . When called with a prefix argument, also remove any +existing deadline from the entry. Depending on the variable +@code{org-log-redeadline}, take a note when changing an existing +deadline@footnote{Note the corresponding @samp{STARTUP} options @samp{logredeadline}, +@samp{lognoteredeadline}, and @samp{nologredeadline}.}. + +@item @kbd{C-c C-s} (@code{org-schedule}) +@kindex C-c C-s +@findex org-schedule +@vindex org-log-reschedule +Insert @samp{SCHEDULED} keyword along with a stamp. The insertion +happens in the line directly following the headline. Remove any +@samp{CLOSED} timestamp. When called with a prefix argument, also remove +the scheduling date from the entry. Depending on the variable +@code{org-log-reschedule}, take a note when changing an existing +scheduling time@footnote{Note the corresponding @samp{STARTUP} options @samp{logreschedule}, +@samp{lognotereschedule}, and @samp{nologreschedule}.}. + +@item @kbd{C-c / d} (@code{org-check-deadlines}) +@kindex C-c / d +@findex org-check-deadlines +@cindex sparse tree, for deadlines +@vindex org-deadline-warning-days +Create a sparse tree with all deadlines that are either past-due, or +which will become due within @code{org-deadline-warning-days}. With +@kbd{C-u} prefix, show all deadlines in the file. With +a numeric prefix, check that many days. For example, @kbd{C-1 C-c / d} shows all deadlines due tomorrow. + +@item @kbd{C-c / b} (@code{org-check-before-date}) +@kindex C-c / b +@findex org-check-before-date +Sparse tree for deadlines and scheduled items before a given date. + +@item @kbd{C-c / a} (@code{org-check-after-date}) +@kindex C-c / a +@findex org-check-after-date +Sparse tree for deadlines and scheduled items after a given date. +@end table + +Note that @code{org-schedule} and @code{org-deadline} supports setting the date +by indicating a relative time e.g., @samp{+1d} sets the date to the next +day after today, and @samp{--1w} sets the date to the previous week before +any current timestamp. + +@node Repeated tasks +@subsection Repeated tasks + +@cindex tasks, repeated +@cindex repeated tasks + +Some tasks need to be repeated again and again. Org mode helps to +organize such tasks using a so-called repeater in a @samp{DEADLINE}, +@samp{SCHEDULED}, or plain timestamps@footnote{Org does not repeat inactive timestamps, however. See +@ref{Timestamps}.}. In the following example: + +@example +** TODO Pay the rent + DEADLINE: <2005-10-01 Sat +1m> +@end example + +@noindent +the @samp{+1m} is a repeater; the intended interpretation is that the task +has a deadline on @samp{<2005-10-01>} and repeats itself every (one) month +starting from that time. You can use yearly, monthly, weekly, daily +and hourly repeat cookies by using the @samp{y}, @samp{m}, @samp{w}, @samp{d} and @samp{h} +letters. If you need both a repeater and a special warning period in +a deadline entry, the repeater should come first and the warning +period last + +@example +DEADLINE: <2005-10-01 Sat +1m -3d> +@end example + + +@vindex org-todo-repeat-to-state +Deadlines and scheduled items produce entries in the agenda when they +are over-due, so it is important to be able to mark such an entry as +done once you have done so. When you mark a @samp{DEADLINE} or +a @samp{SCHEDULED} with the TODO keyword @samp{DONE}, it no longer produces +entries in the agenda. The problem with this is, however, is that +then also the @emph{next} instance of the repeated entry will not be +active. Org mode deals with this in the following way: when you try +to mark such an entry as done, using @kbd{C-c C-t}, it shifts the +base date of the repeating timestamp by the repeater interval, and +immediately sets the entry state back to TODO@footnote{In fact, the target state is taken from, in this sequence, the +@samp{REPEAT_TO_STATE} property, the variable @code{org-todo-repeat-to-state} if +it is a string, the previous TODO state if @code{org-todo-repeat-to-state} +is @code{t}, or the first state of the TODO state sequence.}. In the example +above, setting the state to @samp{DONE} would actually switch the date like +this: + +@example +** TODO Pay the rent + DEADLINE: <2005-11-01 Tue +1m> +@end example + +To mark a task with a repeater as DONE, use @kbd{C-- 1 C-c C-t}, +i.e., @code{org-todo} with a numeric prefix argument of @samp{-1}. + +@vindex org-log-repeat +A timestamp@footnote{You can change this using the option @code{org-log-repeat}, or the +@samp{STARTUP} options @samp{logrepeat}, @samp{lognoterepeat}, and @samp{nologrepeat}. +With @samp{lognoterepeat}, you will also be prompted for a note.} is added under the deadline, to keep a record that +you actually acted on the previous instance of this deadline. + +As a consequence of shifting the base date, this entry is no longer +visible in the agenda when checking past dates, but all future +instances will be visible. + +With the @samp{+1m} cookie, the date shift is always exactly one month. So +if you have not paid the rent for three months, marking this entry +DONE still keeps it as an overdue deadline. Depending on the task, +this may not be the best way to handle it. For example, if you forgot +to call your father for 3 weeks, it does not make sense to call him +3 times in a single day to make up for it. Finally, there are tasks, +like changing batteries, which should always repeat a certain time +@emph{after} the last time you did it. For these tasks, Org mode has +special repeaters @samp{++} and @samp{.+}. For example: + +@example +** TODO Call Father + DEADLINE: <2008-02-10 Sun ++1w> + Marking this DONE shifts the date by at least one week, but also + by as many weeks as it takes to get this date into the future. + However, it stays on a Sunday, even if you called and marked it + done on Saturday. + +** TODO Empty kitchen trash + DEADLINE: <2008-02-08 Fri 20:00 ++1d> + Marking this DONE shifts the date by at least one day, and also + by as many days as it takes to get the timestamp into the future. + Since there is a time in the timestamp, the next deadline in the + future will be on today's date if you complete the task before + 20:00. + +** TODO Check the batteries in the smoke detectors + DEADLINE: <2005-11-01 Tue .+1m> + Marking this DONE shifts the date to one month after today. + +** TODO Wash my hands + DEADLINE: <2019-04-05 08:00 Sun .+1h> + Marking this DONE shifts the date to exactly one hour from now. +@end example + +@vindex org-agenda-skip-scheduled-if-deadline-is-shown +You may have both scheduling and deadline information for a specific +task. If the repeater is set for the scheduling information only, you +probably want the repeater to be ignored after the deadline. If so, +set the variable @code{org-agenda-skip-scheduled-if-deadline-is-shown} to +@code{repeated-after-deadline}. However, any scheduling information +without a repeater is no longer relevant once the task is done, and +thus, removed upon repeating the task. If you want both scheduling +and deadline information to repeat after the same interval, set the +same repeater for both timestamps. + +An alternative to using a repeater is to create a number of copies of +a task subtree, with dates shifted in each copy. The command +@kbd{C-c C-x c} was created for this purpose; it is described in +@ref{Structure Editing}. + +@node Clocking Work Time +@section Clocking Work Time + +@cindex clocking time +@cindex time clocking + +Org mode allows you to clock the time you spend on specific tasks in +a project. When you start working on an item, you can start the +clock. When you stop working on that task, or when you mark the task +done, the clock is stopped and the corresponding time interval is +recorded. It also computes the total time spent on each +subtree@footnote{Clocking only works if all headings are indented with less +than 30 stars. This is a hard-coded limitation of @code{lmax} in +@code{org-clock-sum}.} of a project. And it remembers a history or tasks +recently clocked, so that you can jump quickly between a number of +tasks absorbing your time. + +To save the clock history across Emacs sessions, use: + +@lisp +(setq org-clock-persist 'history) +(org-clock-persistence-insinuate) +@end lisp + +@vindex org-clock-persist +When you clock into a new task after resuming Emacs, the incomplete +clock@footnote{To resume the clock under the assumption that you have worked +on this task while outside Emacs, use @samp{(setq org-clock-persist t)}.} is retrieved (see @ref{Resolving idle time (1)}) and you are +prompted about what to do with it. + +@menu +* Clocking commands:: Starting and stopping a clock. +* The clock table:: Detailed reports. +* Resolving idle time:: Resolving time when you've been idle. +@end menu + +@node Clocking commands +@subsection Clocking commands + +@table @asis +@item @kbd{C-c C-x C-i} (@code{org-clock-in}) +@kindex C-c C-x C-i +@findex org-clock-in +@vindex org-clock-into-drawer +@vindex org-clock-continuously +@cindex @samp{LOG_INTO_DRAWER}, property +Start the clock on the current item (clock-in). This inserts the +@samp{CLOCK} keyword together with a timestamp. If this is not the first +clocking of this item, the multiple @samp{CLOCK} lines are wrapped into +a @samp{LOGBOOK} drawer (see also the variable @code{org-clock-into-drawer}). +You can also overrule the setting of this variable for a subtree by +setting a @samp{CLOCK_INTO_DRAWER} or @samp{LOG_INTO_DRAWER} property. When +called with a @kbd{C-u} prefix argument, select the task from +a list of recently clocked tasks. With two @kbd{C-u C-u} +prefixes, clock into the task at point and mark it as the default +task; the default task is always be available with letter +@kbd{d} when selecting a clocking task. With three @kbd{C-u C-u C-u} prefixes, force continuous clocking by starting the +clock when the last clock stopped. + +@cindex @samp{CLOCK_MODELINE_TOTAL}, property +@cindex @samp{LAST_REPEAT}, property +@vindex org-clock-mode-line-total +@vindex org-clock-in-prepare-hook +While the clock is running, Org shows the current clocking time in +the mode line, along with the title of the task. The clock time +shown is all time ever clocked for this task and its children. If +the task has an effort estimate (see @ref{Effort Estimates}), the mode +line displays the current clocking time against it@footnote{To add an effort estimate ``on the fly'', hook a function doing +this to @code{org-clock-in-prepare-hook}.}. If the +task is a repeating one (see @ref{Repeated tasks}), show only the time +since the last reset of the task@footnote{The last reset of the task is recorded by the @samp{LAST_REPEAT} +property.}. You can exercise more +control over show time with the @samp{CLOCK_MODELINE_TOTAL} property. It +may have the values @samp{current} to show only the current clocking +instance, @samp{today} to show all time clocked on this tasks today---see +also the variable @code{org-extend-today-until}, @code{all} to include all +time, or @code{auto} which is the default@footnote{See also the variable @code{org-clock-mode-line-total}.}. Clicking with +@kbd{mouse-1} onto the mode line entry pops up a menu with +clocking options. + +@item @kbd{C-c C-x C-o} (@code{org-clock-out}) +@kindex C-c C-x C-o +@findex org-clock-out +@vindex org-log-note-clock-out +Stop the clock (clock-out). This inserts another timestamp at the +same location where the clock was last started. It also directly +computes the resulting time in inserts it after the time range as +@samp{=>HH:MM}. See the variable @code{org-log-note-clock-out} for the +possibility to record an additional note together with the clock-out +timestamp@footnote{The corresponding in-buffer setting is: @samp{#+STARTUP: +lognoteclock-out}.}. + +@item @kbd{C-c C-x C-x} (@code{org-clock-in-last}) +@kindex C-c C-x C-x +@findex org-clock-in-last +@vindex org-clock-continuously +Re-clock the last clocked task. With one @kbd{C-u} prefix +argument, select the task from the clock history. With two +@kbd{C-u} prefixes, force continuous clocking by starting the +clock when the last clock stopped. + +@item @kbd{C-c C-x C-e} (@code{org-clock-modify-effort-estimate}) +@kindex C-c C-x C-e +@findex org-clock-modify-effort-estimate +Update the effort estimate for the current clock task. + +@item @kbd{C-c C-c} or @kbd{C-c C-y} (@code{org-evaluate-time-range}) +@kindex C-c C-c +@kindex C-c C-y +@findex org-evaluate-time-range +Recompute the time interval after changing one of the timestamps. +This is only necessary if you edit the timestamps directly. If you +change them with @kbd{S-} keys, the update is +automatic. + +@item @kbd{C-S-@key{UP}} (@code{org-clock-timestamps-up}) +@itemx @kbd{C-S-@key{DOWN}} (@code{org-clock-timestamps-down}) +@kindex C-S-UP +@findex org-clock-timestamps-up +@kindex C-S-DOWN +@findex org-clock-timestamps-down +On CLOCK log lines, increase/decrease both timestamps so that the +clock duration keeps the same value. + +@item @kbd{S-M-@key{UP}} (@code{org-timestamp-up}) +@itemx @kbd{S-M-@key{DOWN}} (@code{org-timestamp-down}) +@kindex S-M-UP +@findex org-clock-timestamp-up +@kindex S-M-DOWN +@findex org-clock-timestamp-down +On @samp{CLOCK} log lines, increase/decrease the timestamp at point and +the one of the previous, or the next, clock timestamp by the same +duration. For example, if you hit @kbd{S-M-@key{UP}} to increase +a clocked-out timestamp by five minutes, then the clocked-in +timestamp of the next clock is increased by five minutes. + +@item @kbd{C-c C-t} (@code{org-todo}) +@kindex C-c C-t +@findex org-todo +Changing the TODO state of an item to DONE automatically stops the +clock if it is running in this same item. + +@item @kbd{C-c C-x C-q} (@code{org-clock-cancel}) +@kindex C-c C-x C-q +@findex org-clock-cancel +Cancel the current clock. This is useful if a clock was started by +mistake, or if you ended up working on something else. + +@item @kbd{C-c C-x C-j} (@code{org-clock-goto}) +@kindex C-c C-x C-j +@findex or-clock-goto +Jump to the headline of the currently clocked in task. With +a @kbd{C-u} prefix argument, select the target task from a list +of recently clocked tasks. + +@item @kbd{C-c C-x C-d} (@code{org-clock-display}) +@kindex C-c C-x C-d +@findex org-clock-display +@vindex org-remove-highlights-with-change +Display time summaries for each subtree in the current buffer. This +puts overlays at the end of each headline, showing the total time +recorded under that heading, including the time of any subheadings. +You can use visibility cycling to study the tree, but the overlays +disappear when you change the buffer (see variable +@code{org-remove-highlights-with-change}) or press @kbd{C-c C-c}. +@end table + +The @kbd{l} key may be used in the agenda (see @ref{Weekly/daily agenda}) to show which tasks have been worked on or closed during +a day. + +@strong{Important:} note that both @code{org-clock-out} and @code{org-clock-in-last} +can have a global keybinding and do not modify the window disposition. + +@node The clock table +@subsection The clock table + +@cindex clocktable, dynamic block +@cindex report, of clocked time + +Org mode can produce quite complex reports based on the time clocking +information. Such a report is called a @emph{clock table}, because it is +formatted as one or several Org tables. + +@table @asis +@item @code{org-clock-report} +@kindex C-c C-x x +@findex org-clock-report +Insert or update a clock table. When called with a prefix argument, +jump to the first clock table in the current document and update it. +The clock table includes archived trees. + +This command can be invoked by calling +@code{org-dynamic-block-insert-dblock} (@kbd{C-c C-x x}) and +selecting ``clocktable'' (see @ref{Dynamic Blocks}). + +@item @kbd{C-c C-c} or @kbd{C-c C-x C-u} (@code{org-dblock-update}) +@kindex C-c C-c +@kindex C-c C-x C-u +@findex org-dblock-update +Update dynamic block at point. Point needs to be in the @samp{BEGIN} +line of the dynamic block. + +@item @kbd{C-u C-c C-x C-u} +@kindex C-u C-c C-x C-u +Update all dynamic blocks (see @ref{Dynamic Blocks}). This is useful if +you have several clock table blocks in a buffer. + +@item @kbd{S-@key{LEFT}} +@itemx @kbd{S-@key{RIGHT}} (@code{org-clocktable-try-shift}) +@kindex S-LEFT +@kindex S-RIGHT +@findex org-clocktable-try-shift +Shift the current @samp{:block} interval and update the table. Point +needs to be in the @samp{#+BEGIN: clocktable} line for this command. If +@samp{:block} is @samp{today}, it is shifted to @samp{today-1}, etc. +@end table + +Here is an example of the frame for a clock table as it is inserted +into the buffer by @code{org-clock-report}: + +@cindex @samp{BEGIN clocktable} +@example +#+BEGIN: clocktable :maxlevel 2 :emphasize nil :scope file +#+END: clocktable +@end example + +@vindex org-clocktable-defaults +The @samp{#+BEGIN} line contains options to define the scope, structure, +and formatting of the report. Defaults for all these options can be +configured in the variable @code{org-clocktable-defaults}. + +First there are options that determine which clock entries are to +be selected: + +@table @asis +@item @samp{:maxlevel} +Maximum level depth to which times are listed in the table. Clocks +at deeper levels are summed into the upper level. + +@item @samp{:scope} +The scope to consider. This can be any of the following: + +@multitable {aaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{nil} +@tab the current buffer or narrowed region +@item @samp{file} +@tab the full current buffer +@item @samp{subtree} +@tab the subtree where the clocktable is located +@item @samp{treeN} +@tab the surrounding level N tree, for example @samp{tree3} +@item @samp{tree} +@tab the surrounding level 1 tree +@item @samp{agenda} +@tab all agenda files +@item @samp{("file" ...)} +@tab scan these files +@item @samp{FUNCTION} +@tab scan files returned by calling @var{FUNCTION} with no argument +@item @samp{file-with-archives} +@tab current file and its archives +@item @samp{agenda-with-archives} +@tab all agenda files, including archives +@end multitable + +@item @samp{:block} +The time block to consider. This block is specified either +absolutely, or relative to the current time and may be any of these +formats: + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaa} +@item @samp{2007-12-31} +@tab New year eve 2007 +@item @samp{2007-12} +@tab December 2007 +@item @samp{2007-W50} +@tab ISO-week 50 in 2007 +@item @samp{2007-Q2} +@tab 2nd quarter in 2007 +@item @samp{2007} +@tab the year 2007 +@item @samp{today}, @samp{yesterday}, @samp{today-N} +@tab a relative day +@item @samp{thisweek}, @samp{lastweek}, @samp{thisweek-N} +@tab a relative week +@item @samp{thismonth}, @samp{lastmonth}, @samp{thismonth-N} +@tab a relative month +@item @samp{thisyear}, @samp{lastyear}, @samp{thisyear-N} +@tab a relative year +@item @samp{untilnow}@footnote{When using @code{:step}, @code{untilnow} starts from the beginning of +2003, not the beginning of time.} +@tab all clocked time ever +@end multitable + +@vindex org-clock-display-default-range +When this option is not set, Org falls back to the value in +@code{org-clock-display-default-range}, which defaults to the current +year. + +Use @kbd{S-@key{LEFT}} or @kbd{S-@key{RIGHT}} to shift the time +interval. + +@item @samp{:tstart} +A time string specifying when to start considering times. Relative +times like @samp{"<-2w>"} can also be used. See @ref{Matching tags and properties} for relative time syntax. + +@item @samp{:tend} +A time string specifying when to stop considering times. Relative +times like @samp{""} can also be used. See @ref{Matching tags and properties} for relative time syntax. + +@item @samp{:wstart} +The starting day of the week. The default is 1 for Monday. + +@item @samp{:mstart} +The starting day of the month. The default is 1 for the first. + +@item @samp{:step} +Set to @samp{day}, @samp{week}, @samp{semimonth}, @samp{month}, or @samp{year} to split the +table into chunks. To use this, either @samp{:block}, or @samp{:tstart} and +@samp{:tend} are required. + +@item @samp{:stepskip0} +When non-@code{nil}, do not show steps that have zero time. + +@item @samp{:fileskip0} +When non-@code{nil}, do not show table sections from files which did not +contribute. + +@item @samp{:match} +A tags match to select entries that should contribute. See +@ref{Matching tags and properties} for the match syntax. +@end table + +@findex org-clocktable-write-default +Then there are options that determine the formatting of the table. +There options are interpreted by the function +@code{org-clocktable-write-default}, but you can specify your own function +using the @samp{:formatter} parameter. + +@table @asis +@item @samp{:emphasize} +When non-@code{nil}, emphasize level one and level two items. + +@item @samp{:lang} +Language@footnote{Language terms can be set through the variable +@code{org-clock-clocktable-language-setup}.} to use for descriptive cells like ``Task''. + +@item @samp{:link} +Link the item headlines in the table to their origins. + +@item @samp{:narrow} +An integer to limit the width of the headline column in the Org +table. If you write it like @samp{50!}, then the headline is also +shortened in export. + +@item @samp{:indent} +Indent each headline field according to its level. + +@item @samp{:hidefiles} +Hide the file column when multiple files are used to produce the +table. + +@item @samp{:tcolumns} +Number of columns to be used for times. If this is smaller than +@samp{:maxlevel}, lower levels are lumped into one column. + +@item @samp{:level} +Should a level number column be included? + +@item @samp{:sort} +A cons cell containing the column to sort and a sorting type. E.g., +@samp{:sort (1 . ?a)} sorts the first column alphabetically. + +@item @samp{:compact} +Abbreviation for @samp{:level nil :indent t :narrow 40! :tcolumns 1}. +All are overwritten except if there is an explicit @samp{:narrow}. + +@item @samp{:timestamp} +A timestamp for the entry, when available. Look for @samp{SCHEDULED}, +@samp{DEADLINE}, @samp{TIMESTAMP} and @samp{TIMESTAMP_IA} special properties (see +@ref{Special Properties}), in this order. + +@item @samp{:tags} +When this flag is non-@code{nil}, show the headline's tags. + +@item @samp{:properties} +List of properties shown in the table. Each property gets its own +column. + +@item @samp{:inherit-props} +When this flag is non-@code{nil}, the values for @samp{:properties} are +inherited. + +@item @samp{:formula} +Content of a @samp{TBLFM} keyword to be added and evaluated. As +a special case, @samp{:formula %} adds a column with % time. If you do +not specify a formula here, any existing formula below the clock +table survives updates and is evaluated. + +@item @samp{:formatter} +A function to format clock data and insert it into the buffer. +@end table + +To get a clock summary of the current level 1 tree, for the current +day, you could write: + +@example +#+BEGIN: clocktable :maxlevel 2 :block today :scope tree1 :link t +#+END: clocktable +@end example + +@noindent +To use a specific time range you could write@footnote{Note that all parameters must be specified in a single +line---the line is broken here only to fit it into the manual.} + +@example +#+BEGIN: clocktable :tstart "<2006-08-10 Thu 10:00>" + :tend "<2006-08-10 Thu 12:00>" +#+END: clocktable +@end example + +@noindent +A range starting a week ago and ending right now could be written as + +@example +#+BEGIN: clocktable :tstart "<-1w>" :tend "" +#+END: clocktable +@end example + +@noindent +A summary of the current subtree with % times would be + +@example +#+BEGIN: clocktable :scope subtree :link t :formula % +#+END: clocktable +@end example + +@noindent +A horizontally compact representation of everything clocked during +last week would be + +@example +#+BEGIN: clocktable :scope agenda :block lastweek :compact t +#+END: clocktable +@end example + +@node Resolving idle time +@subsection Resolving idle time and continuous clocking + + + +@anchor{Resolving idle time (1)} +@subsubheading Resolving idle time + +@cindex resolve idle time +@cindex idle, resolve, dangling + +If you clock in on a work item, and then walk away from your +computer---perhaps to take a phone call---you often need to +``resolve'' the time you were away by either subtracting it from the +current clock, or applying it to another one. + +@vindex org-clock-idle-time +@vindex org-clock-x11idle-program-name +By customizing the variable @code{org-clock-idle-time} to some integer, +such as 10 or 15, Emacs can alert you when you get back to your +computer after being idle for that many minutes@footnote{On computers using macOS, idleness is based on actual user +idleness, not just Emacs' idle time. For X11, you can install a +utility program @samp{x11idle.c}, available in the @samp{org-contrib/} +repository, or install the xprintidle package and set it to the +variable @code{org-clock-x11idle-program-name} if you are running Debian, +to get the same general treatment of idleness. On other systems, idle +time refers to Emacs idle time only.}, and ask what +you want to do with the idle time. There will be a question waiting +for you when you get back, indicating how much idle time has passed +constantly updated with the current amount, as well as a set of +choices to correct the discrepancy: + +@table @asis +@item @kbd{k} +@kindex k +To keep some or all of the minutes and stay clocked in, press +@kbd{k}. Org asks how many of the minutes to keep. Press +@kbd{@key{RET}} to keep them all, effectively changing nothing, or +enter a number to keep that many minutes. + +@item @kbd{K} +@kindex K +If you use the shift key and press @kbd{K}, it keeps however +many minutes you request and then immediately clock out of that +task. If you keep all of the minutes, this is the same as just +clocking out of the current task. + +@item @kbd{s} +@kindex s +To keep none of the minutes, use @kbd{s} to subtract all the +away time from the clock, and then check back in from the moment you +returned. + +@item @kbd{S} +@kindex S +To keep none of the minutes and just clock out at the start of the +away time, use the shift key and press @kbd{S}. Remember that +using shift always leave you clocked out, no matter which option you +choose. + +@item @kbd{C} +@kindex C +To cancel the clock altogether, use @kbd{C}. Note that if +instead of canceling you subtract the away time, and the resulting +clock amount is less than a minute, the clock is still canceled +rather than cluttering up the log with an empty entry. +@end table + +What if you subtracted those away minutes from the current clock, and +now want to apply them to a new clock? Simply clock in to any task +immediately after the subtraction. Org will notice that you have +subtracted time ``on the books'', so to speak, and will ask if you want +to apply those minutes to the next task you clock in on. + +There is one other instance when this clock resolution magic occurs. +Say you were clocked in and hacking away, and suddenly your cat chased +a mouse who scared a hamster that crashed into your UPS's power +button! You suddenly lose all your buffers, but thanks to auto-save +you still have your recent Org mode changes, including your last clock +in. + +If you restart Emacs and clock into any task, Org will notice that you +have a dangling clock which was never clocked out from your last +session. Using that clock's starting time as the beginning of the +unaccounted-for period, Org will ask how you want to resolve that +time. The logic and behavior is identical to dealing with away time +due to idleness; it is just happening due to a recovery event rather +than a set amount of idle time. + +You can also check all the files visited by your Org agenda for +dangling clocks at any time using @kbd{M-x org-resolve-clocks @key{RET}} (or @kbd{C-c C-x C-z}). + +@anchor{Continuous clocking} +@subsubheading Continuous clocking + +@cindex continuous clocking + +@vindex org-clock-continuously +You may want to start clocking from the time when you clocked out the +previous task. To enable this systematically, set +@code{org-clock-continuously} to non-@code{nil}. Each time you clock in, Org +retrieves the clock-out time of the last clocked entry for this +session, and start the new clock from there. + +If you only want this from time to time, use three universal prefix +arguments with @code{org-clock-in} and two @kbd{C-u C-u} with +@code{org-clock-in-last}. + +@anchor{Clocking out automatically after some idle time} +@subsubheading Clocking out automatically after some idle time + +@cindex auto clocking out after idle time + +@vindex org-clock-auto-clockout-timer +When you often forget to clock out before being idle and you don't +want to manually set the clocking time to take into account, you can +set @code{org-clock-auto-clockout-timer} to a number of seconds and add +@samp{(org-clock-auto-clockout-insinuate)} to your @samp{.emacs} file. + +When the clock is running and Emacs is idle for more than this number +of seconds, the clock will be clocked out automatically. + +Use @samp{M-x org-clock-toggle-auto-clockout RET} to temporarily turn this +on or off. + +@node Effort Estimates +@section Effort Estimates + +@cindex effort estimates +@cindex @samp{EFFORT}, property +@vindex org-effort-property + +If you want to plan your work in a very detailed way, or if you need +to produce offers with quotations of the estimated work effort, you +may want to assign effort estimates to entries. If you are also +clocking your work, you may later want to compare the planned effort +with the actual working time, a great way to improve planning +estimates. + +Effort estimates are stored in a special property @samp{EFFORT}. Multiple +formats are supported, such as @samp{3:12}, @samp{1:23:45}, or @samp{1d3h5min}; see +the file @samp{org-duration.el} for more detailed information about the +format. + +You can set the effort for an entry with the following commands: + +@table @asis +@item @kbd{C-c C-x e} (@code{org-set-effort}) +@kindex C-c C-x e +@findex org-set-effort +Set the effort estimate for the current entry. With a prefix +argument, set it to the next allowed value---see below. This +command is also accessible from the agenda with the @kbd{e} +key. + +@item @kbd{C-c C-x C-e} (@code{org-clock-modify-effort-estimate}) +@kindex C-c C-x C-e +@findex org-clock-modify-effort-estimate +Modify the effort estimate of the item currently being clocked. +@end table + +Clearly the best way to work with effort estimates is through column +view (see @ref{Column View}). You should start by setting up discrete +values for effort estimates, and a @samp{COLUMNS} format that displays +these values together with clock sums---if you want to clock your +time. For a specific buffer you can use: + +@example +#+PROPERTY: Effort_ALL 0 0:10 0:30 1:00 2:00 3:00 4:00 5:00 6:00 7:00 +#+COLUMNS: %40ITEM(Task) %17Effort(Estimated Effort)@{:@} %CLOCKSUM +@end example + +@noindent +@vindex org-global-properties +@vindex org-columns-default-format +or, even better, you can set up these values globally by customizing +the variables @code{org-global-properties} and +@code{org-columns-default-format}. In particular if you want to use this +setup also in the agenda, a global setup may be advised. + +The way to assign estimates to individual items is then to switch to +column mode, and to use @kbd{S-@key{RIGHT}} and @kbd{S-@key{LEFT}} to +change the value. The values you enter are immediately summed up in +the hierarchy. In the column next to it, any clocked time is +displayed. + +@vindex org-agenda-columns-add-appointments-to-effort-sum +If you switch to column view in the daily/weekly agenda, the effort +column summarizes the estimated work effort for each day@footnote{Please note the pitfalls of summing hierarchical data in +a flat list (see @ref{Agenda Column View}).}, and +you can use this to find space in your schedule. To get an overview +of the entire part of the day that is committed, you can set the +option @code{org-agenda-columns-add-appointments-to-effort-sum}. The +appointments on a day that take place over a specified time interval +are then also added to the load estimate of the day. + +Effort estimates can be used in secondary agenda filtering that is +triggered with the @kbd{/} key in the agenda (see @ref{Agenda Commands}). If you have these estimates defined consistently, +two or three key presses narrow down the list to stuff that fits into +an available time slot. + +@node Timers +@section Taking Notes with a Relative Timer + +@cindex relative timer +@cindex countdown timer + +Org provides two types of timers. There is a relative timer that +counts up, which can be useful when taking notes during, for example, +a meeting or a video viewing. There is also a countdown timer. + +The relative and countdown are started with separate commands. + +@table @asis +@item @kbd{C-c C-x 0} (@code{org-timer-start}) +@kindex C-c C-x 0 +@findex org-timer-start +Start or reset the relative timer. By default, the timer is set +to 0. When called with a @kbd{C-u} prefix, prompt the user for +a starting offset. If there is a timer string at point, this is +taken as the default, providing a convenient way to restart taking +notes after a break in the process. When called with a double +prefix argument @kbd{C-u C-u}, change all timer strings in the +active region by a certain amount. This can be used to fix timer +strings if the timer was not started at exactly the right moment. + +@item @kbd{C-c C-x ;} (@code{org-timer-set-timer}) +@kindex C-c C-x ; +@findex org-timer-set-timer +@vindex org-timer-default-timer +Start a countdown timer. The user is prompted for a duration. +@code{org-timer-default-timer} sets the default countdown value. Giving +a numeric prefix argument overrides this default value. This +command is available as @kbd{;} in agenda buffers. +@end table + +Once started, relative and countdown timers are controlled with the +same commands. + +@table @asis +@item @kbd{C-c C-x .} (@code{org-timer}) +@kindex C-c C-x . +@findex org-timer +Insert a relative time into the buffer. The first time you use +this, the timer starts. Using a prefix argument restarts it. + +@item @kbd{C-c C-x -} (@code{org-timer-item}) +@kindex C-c C-x - +@findex org-timer-item +Insert a description list item with the current relative time. With +a prefix argument, first reset the timer to 0. + +@item @kbd{M-@key{RET}} (@code{org-insert-heading}) +@kindex M-RET +@findex org-insert-heading +Once the timer list is started, you can also use @kbd{M-@key{RET}} to +insert new timer items. + +@item @kbd{C-c C-x ,} (@code{org-timer-pause-or-continue}) +@kindex C-c C-x , +@findex org-timer-pause-or-continue +Pause the timer, or continue it if it is already paused. + +@item @kbd{C-c C-x _} (@code{org-timer-stop}) +@kindex C-c C-x _ +@findex org-timer-stop +Stop the timer. After this, you can only start a new timer, not +continue the old one. This command also removes the timer from the +mode line. +@end table + +@node Refiling and Archiving +@chapter Refiling and Archiving + +@cindex refiling notes +@cindex copying notes +@cindex archiving + +Once information is in the system, it may need to be moved around. +Org provides Refile, Copy and Archive commands for this. Refile and +Copy helps with moving and copying outlines. Archiving helps to keep +the system compact and fast. + +@menu +* Refile and Copy:: Moving/copying a tree from one place to another. +* Archiving:: What to do with finished products. +@end menu + +@node Refile and Copy +@section Refile and Copy + +@cindex refiling notes +@cindex copying notes + +When reviewing the captured data, you may want to refile or to copy +some of the entries into a different list, for example into a project. +Cutting, finding the right location, and then pasting the note is +cumbersome. To simplify this process, you can use the following +special command: + +@table @asis +@item @kbd{C-c C-w} (@code{org-refile}) +@kindex C-c C-w +@findex org-refile +@vindex org-reverse-note-order +@vindex org-refile-targets +@vindex org-refile-use-outline-path +@vindex org-outline-path-complete-in-steps +@vindex org-refile-allow-creating-parent-nodes +@vindex org-log-refile +Refile the entry or region at point. This command offers possible +locations for refiling the entry and lets you select one with +completion. The item (or all items in the region) is filed below +the target heading as a subitem. Depending on +@code{org-reverse-note-order}, it is either the first or last subitem. + +By default, all level 1 headlines in the current buffer are +considered to be targets, but you can have more complex definitions +across a number of files. See the variable @code{org-refile-targets} for +details. If you would like to select a location via +a file-path-like completion along the outline path, see the +variables @code{org-refile-use-outline-path} and +@code{org-outline-path-complete-in-steps}. If you would like to be able +to create new nodes as new parents for refiling on the fly, check +the variable @code{org-refile-allow-creating-parent-nodes}. When the +variable @code{org-log-refile}@footnote{Note the corresponding @samp{STARTUP} options @samp{logrefile}, +@samp{lognoterefile}, and @samp{nologrefile}.} is set, a timestamp or a note is +recorded whenever an entry is refiled. + +@item @kbd{C-u C-c C-w} +@kindex C-u C-c C-w +Use the refile interface to jump to a heading. + +@item @kbd{C-u C-u C-c C-w} (@code{org-refile-goto-last-stored}) +@kindex C-u C-u C-c C-w +@findex org-refile-goto-last-stored +Jump to the location where @code{org-refile} last moved a tree to. + +@item @kbd{C-2 C-c C-w} +@kindex C-2 C-c C-w +Refile as the child of the item currently being clocked. + +@item @kbd{C-3 C-c C-w} +@kindex C-3 C-c C-w +@vindex org-refile-keep +Refile and keep the entry in place. Also see @code{org-refile-keep} to +make this the default behavior, and beware that this may result in +duplicated @samp{ID} properties. + +@item @kbd{C-0 C-c C-w} or @kbd{C-u C-u C-u C-c C-w} (@code{org-refile-cache-clear}) +@kindex C-u C-u C-u C-c C-w +@kindex C-0 C-c C-w +@findex org-refile-cache-clear +@vindex org-refile-use-cache +Clear the target cache. Caching of refile targets can be turned on +by setting @code{org-refile-use-cache}. To make the command see new +possible targets, you have to clear the cache with this command. + +@item @kbd{C-c M-w} (@code{org-refile-copy}) +@kindex C-c M-w +@findex org-refile-copy +Copying works like refiling, except that the original note is not +deleted. + +@item @kbd{C-c C-M-w} (@code{org-refile-reverse}) +@kindex C-c C-M-w +@findex org-refile-reverse +Works like refiling, except that it temporarily toggles how the +value of @code{org-reverse-note-order} applies to the current buffer. So +if @code{org-refile} would append the entry as the last entry under the +target header, @code{org-refile-reverse} will prepend it as the first +entry, and vice-versa. +@end table + +@node Archiving +@section Archiving + +@cindex archiving + +When a project represented by a (sub)tree is finished, you may want to +move the tree out of the way and to stop it from contributing to the +agenda. Archiving is important to keep your working files compact and +global searches like the construction of agenda views fast. + +@table @asis +@item @kbd{C-c C-x C-a} (@code{org-archive-subtree-default}) +@kindex C-c C-x C-a +@findex org-archive-subtree-default +@vindex org-archive-default-command +Archive the current entry using the command specified in the +variable @code{org-archive-default-command}. +@end table + +@menu +* Moving subtrees:: Moving a tree to an archive file. +* Internal archiving:: Switch off a tree but keep it in the file. +@end menu + +@node Moving subtrees +@subsection Moving a tree to an archive file + +@cindex external archiving + +The most common archiving action is to move a project tree to another +file, the archive file. + +@table @asis +@item @kbd{C-c C-x C-s} or short @kbd{C-c $} (@code{org-archive-subtree}) +@kindex C-c C-x C-s +@kindex C-c $ +@findex org-archive-subtree +@vindex org-archive-location +Archive the subtree starting at point position to the location given +by @code{org-archive-location}. + +@item @kbd{C-u C-c C-x C-s} +@kindex C-u C-c C-x C-s +Check if any direct children of the current headline could be moved +to the archive. To do this, check each subtree for open TODO +entries. If none is found, the command offers to move it to the +archive location. If point is @emph{not} on a headline when this command +is invoked, check level 1 trees. + +@item @kbd{C-u C-u C-c C-x C-s} +@kindex C-u C-u C-c C-x C-s +As above, but check subtree for timestamps instead of TODO entries. +The command offers to archive the subtree if it @emph{does} contain +a timestamp, and that timestamp is in the past. +@end table + +@cindex archive locations +The default archive location is a file in the same directory as the +current file, with the name derived by appending @samp{_archive} to the +current file name. You can also choose what heading to file archived +items under, with the possibility to add them to a datetree in a file. +For information and examples on how to specify the file and the +heading, see the documentation string of the variable +@code{org-archive-location}. + +There is also an in-buffer option for setting this variable, for +example: + +@cindex @samp{ARCHIVE}, keyword +@example +#+ARCHIVE: %s_done:: +@end example + + +@cindex ARCHIVE, property +If you would like to have a special archive location for a single +entry or a (sub)tree, give the entry an @samp{ARCHIVE} property with the +location as the value (see @ref{Properties and Columns}). + +@vindex org-archive-save-context-info +When a subtree is moved, it receives a number of special properties +that record context information like the file from where the entry +came, its outline path the archiving time etc. Configure the variable +@code{org-archive-save-context-info} to adjust the amount of information +added. + +@vindex org-archive-subtree-save-file-p +When @code{org-archive-subtree-save-file-p} is non-@code{nil}, save the target +archive buffer. + +@node Internal archiving +@subsection Internal archiving + +@cindex @samp{ARCHIVE}, tag +If you want to just switch off---for agenda views---certain subtrees +without moving them to a different file, you can use the @samp{ARCHIVE} +tag. + +A headline that is marked with the @samp{ARCHIVE} tag (see @ref{Tags}) stays at +its location in the outline tree, but behaves in the following way: + +@itemize +@item +@vindex org-cycle-open-archived-trees +It does not open when you attempt to do so with a visibility cycling +command (see @ref{Visibility Cycling}). You can force cycling archived +subtrees with @kbd{C-@key{TAB}}, or by setting the option +@code{org-cycle-open-archived-trees}. Also normal outline commands, like +@code{outline-show-all}, open archived subtrees. + +@item +@vindex org-sparse-tree-open-archived-trees +During sparse tree construction (see @ref{Sparse Trees}), matches in +archived subtrees are not exposed, unless you configure the option +@code{org-sparse-tree-open-archived-trees}. + +@item +@vindex org-agenda-skip-archived-trees +During agenda view construction (see @ref{Agenda Views}), the content of +archived trees is ignored unless you configure the option +@code{org-agenda-skip-archived-trees}, in which case these trees are +always included. In the agenda you can press @kbd{v a} to get +archives temporarily included. + +@item +@vindex org-export-with-archived-trees +Archived trees are not exported (see @ref{Exporting}), only the headline +is. Configure the details using the variable +@code{org-export-with-archived-trees}. + +@item +@vindex org-columns-skip-archived-trees +Archived trees are excluded from column view unless the variable +@code{org-columns-skip-archived-trees} is configured to @code{nil}. +@end itemize + +The following commands help manage the @samp{ARCHIVE} tag: + +@table @asis +@item @kbd{C-c C-x a} (@code{org-toggle-archive-tag}) +@kindex C-c C-x a +@findex org-toggle-archive-tag +Toggle the archive tag for the current headline. When the tag is +set, the headline changes to a shadowed face, and the subtree below +it is hidden. + +@item @kbd{C-u C-c C-x a} +@kindex C-u C-c C-x a +Check if any direct children of the current headline should be +archived. To do this, check each subtree for open TODO entries. If +none is found, the command offers to set the @samp{ARCHIVE} tag for the +child. If point is @emph{not} on a headline when this command is +invoked, check the level 1 trees. + +@item @kbd{C-c C-@key{TAB}} (@code{org-force-cycle-archived}) +@kindex C-TAB +Cycle a tree even if it is tagged with @samp{ARCHIVE}. + +@item @kbd{C-c C-x A} (@code{org-archive-to-archive-sibling}) +@kindex C-c C-x A +@findex org-archive-to-archive-sibling +Move the current entry to the @emph{Archive Sibling}. This is a sibling +of the entry with the heading @samp{Archive} and the archive tag. The +entry becomes a child of that sibling and in this way retains a lot +of its original context, including inherited tags and approximate +position in the outline. +@end table + +@node Capture and Attachments +@chapter Capture and Attachments + +@cindex capture +@cindex attachments +@cindex RSS feeds +@cindex Atom feeds +@cindex protocols, for external access + +An important part of any organization system is the ability to quickly +capture new ideas and tasks, and to associate reference material with +them. Org does this using a process called @emph{capture}. It also can +store files related to a task (@emph{attachments}) in a special directory. +Finally, it can parse RSS feeds for information. To learn how to let +external programs (for example a web browser) trigger Org to capture +material, see @ref{Protocols}. + +@menu +* Capture:: Capturing new stuff. +* Attachments:: Attach files to outlines. +* RSS Feeds:: Getting input from RSS feeds. +@end menu + +@node Capture +@section Capture + +@cindex capture + +Capture lets you quickly store notes with little interruption of your +work flow. Org's method for capturing new items is heavily inspired +by John Wiegley's excellent Remember package. + +@menu +* Setting up capture:: Where notes will be stored. +* Using capture:: Commands to invoke and terminate capture. +* Capture templates:: Define the outline of different note types. +@end menu + +@node Setting up capture +@subsection Setting up capture + +The following customization sets a default target file for notes. + +@vindex org-default-notes-file +@lisp +(setq org-default-notes-file (concat org-directory "/notes.org")) +@end lisp + +You may also define a global key for capturing new material (see +@ref{Activation}). + +@node Using capture +@subsection Using capture + +@table @asis +@item @kbd{M-x org-capture} (@code{org-capture}) +@findex org-capture +@cindex date tree +Display the capture templates menu. If you have templates defined +(see @ref{Capture templates}), it offers these templates for selection or +use a new Org outline node as the default template. It inserts the +template into the target file and switch to an indirect buffer +narrowed to this new node. You may then insert the information you +want. + +@item @kbd{C-c C-c} (@code{org-capture-finalize}) +@kindex C-c C-c @r{(Capture buffer)} +@findex org-capture-finalize +Once you have finished entering information into the capture buffer, +@kbd{C-c C-c} returns you to the window configuration before +the capture process, so that you can resume your work without +further distraction. When called with a prefix argument, finalize +and then jump to the captured item. + +@item @kbd{C-c C-w} (@code{org-capture-refile}) +@kindex C-c C-w @r{(Capture buffer)} +@findex org-capture-refile +Finalize the capture process by refiling the note to a different +place (see @ref{Refile and Copy}). Please realize that this is a normal +refiling command that will be executed---so point position at the +moment you run this command is important. If you have inserted +a tree with a parent and children, first move point back to the +parent. Any prefix argument given to this command is passed on to +the @code{org-refile} command. + +@item @kbd{C-c C-k} (@code{org-capture-kill}) +@kindex C-c C-k @r{(Capture buffer)} +@findex org-capture-kill +Abort the capture process and return to the previous state. +@end table + +@kindex k c @r{(Agenda)} +You can also call @code{org-capture} in a special way from the agenda, +using the @kbd{k c} key combination. With this access, any +timestamps inserted by the selected capture template defaults to the +date at point in the agenda, rather than to the current date. + +To find the locations of the last stored capture, use @code{org-capture} +with prefix commands: + +@table @asis +@item @kbd{C-u M-x org-capture} +Visit the target location of a capture template. You get to select +the template in the usual way. + +@item @kbd{C-u C-u M-x org-capture} +Visit the last stored capture item in its buffer. +@end table + +@vindex org-capture-bookmark +@vindex org-capture-last-stored +You can also jump to the bookmark @code{org-capture-last-stored}, which is +automatically created unless you set @code{org-capture-bookmark} to @code{nil}. + +To insert the capture at point in an Org buffer, call @code{org-capture} +with a @kbd{C-0} prefix argument. + +@node Capture templates +@subsection Capture templates + +@cindex templates, for Capture + +You can use templates for different types of capture items, and for +different target locations. The easiest way to create such templates +is through the customize interface. + +@table @asis +@item @kbd{C} +@kindex C @r{(Capture menu} +@vindex org-capture-templates +Customize the variable @code{org-capture-templates}. +@end table + +Before we give the formal description of template definitions, let's +look at an example. Say you would like to use one template to create +general TODO entries, and you want to put these entries under the +heading @samp{Tasks} in your file @samp{~/org/gtd.org}. Also, a date tree in +the file @samp{journal.org} should capture journal entries. A possible +configuration would look like: + +@lisp +(setq org-capture-templates + '(("t" "Todo" entry (file+headline "~/org/gtd.org" "Tasks") + "* TODO %?\n %i\n %a") + ("j" "Journal" entry (file+datetree "~/org/journal.org") + "* %?\nEntered on %U\n %i\n %a"))) +@end lisp + +If you then press @kbd{t} from the capture menu, Org will prepare +the template for you like this: + +@example +* TODO + [[file:LINK TO WHERE YOU INITIATED CAPTURE]] +@end example + +@noindent +During expansion of the template, @samp{%a} has been replaced by a link to +the location from where you called the capture command. This can be +extremely useful for deriving tasks from emails, for example. You +fill in the task definition, press @kbd{C-c C-c} and Org returns +you to the same place where you started the capture process. + +To define special keys to capture to a particular template without +going through the interactive template selection, you can create your +key binding like this: + +@lisp +(define-key global-map (kbd "C-c x") + (lambda () (interactive) (org-capture nil "x"))) +@end lisp + +@menu +* Template elements:: What is needed for a complete template entry. +* Template expansion:: Filling in information about time and context. +* Templates in contexts:: Only show a template in a specific context. +@end menu + +@node Template elements +@subsubsection Template elements + +Now lets look at the elements of a template definition. Each entry in +@code{org-capture-templates} is a list with the following items: + +@table @asis +@item keys +The keys that selects the template, as a string, characters only, +for example @samp{"a"}, for a template to be selected with a single key, +or @samp{"bt"} for selection with two keys. When using several keys, +keys using the same prefix key must be sequential in the list and +preceded by a 2-element entry explaining the prefix key, for +example: + +@lisp +("b" "Templates for marking stuff to buy") +@end lisp + +If you do not define a template for the @kbd{C} key, this key +opens the Customize buffer for this complex variable. + +@item description +A short string describing the template, shown during selection. + +@item type +The type of entry, a symbol. Valid values are: + +@table @asis +@item @code{entry} +An Org mode node, with a headline. Will be filed as the child of +the target entry or as a top-level entry. The target file should +be an Org file. + +@item @code{item} +A plain list item, placed in the first plain list at the target +location. Again the target file should be an Org file. + +@item @code{checkitem} +A checkbox item. This only differs from the plain list item by +the default template. + +@item @code{table-line} +A new line in the first table at the target location. Where +exactly the line will be inserted depends on the properties +@code{:prepend} and @code{:table-line-pos} (see below). + +@item @code{plain} +Text to be inserted as it is. +@end table + +@item target +@vindex org-default-notes-file +@vindex org-directory +Specification of where the captured item should be placed. In Org +files, targets usually define a node. Entries will become children +of this node. Other types will be added to the table or list in the +body of this node. Most target specifications contain a file name. +If that file name is the empty string, it defaults to +@code{org-default-notes-file}. A file can also be given as a variable or +as a function called with no argument. When an absolute path is not +specified for a target, it is taken as relative to @code{org-directory}. + +Valid values are: + +@table @asis +@item @samp{(file "path/to/file")} +Text will be placed at the beginning or end of that file. + +@item @samp{(id "id of existing org entry")} +Filing as child of this entry, or in the body of the entry. + +@item @samp{(file+headline "filename" "node headline")} +Fast configuration if the target heading is unique in the file. + +@item @samp{(file+olp "filename" "Level 1 heading" "Level 2" ...)} +For non-unique headings, the full path is safer. + +@item @samp{(file+regexp "filename" "regexp to find location")} +Use a regular expression to position point. + +@item @samp{(file+olp+datetree "filename" [ "Level 1 heading" ...])} +This target@footnote{Org used to offer four different targets for date/week tree +capture. Now, Org automatically translates these to use +@code{file+olp+datetree}, applying the @code{:time-prompt} and @code{:tree-type} +properties. Please rewrite your date/week-tree targets using +@code{file+olp+datetree} since the older targets are now deprecated.} creates a heading in a date tree@footnote{A date tree is an outline structure with years on the highest +level, months or ISO weeks as sublevels and then dates on the lowest +level. Tags are allowed in the tree structure.} for +today's date. If the optional outline path is given, the tree +will be built under the node it is pointing to, instead of at top +level. Check out the @code{:time-prompt} and @code{:tree-type} properties +below for additional options. + +@item @samp{(file+function "filename" function-finding-location)} +A function to find the right location in the file. + +@item @samp{(clock)} +File to the entry that is currently being clocked. + +@item @samp{(function function-finding-location)} +Most general way: write your own function which both visits the +file and moves point to the right location. +@end table + +@item template +The template for creating the capture item. If you leave this +empty, an appropriate default template will be used. Otherwise this +is a string with escape codes, which will be replaced depending on +time and context of the capture call. You may also get this +template string from a file@footnote{When the file name is not absolute, Org assumes it is relative +to @code{org-directory}.}, or dynamically, from a function +using either syntax: + +@example +(file "/path/to/template-file") +(function FUNCTION-RETURNING-THE-TEMPLATE) +@end example + +@item properties +The rest of the entry is a property list of additional options. +Recognized properties are: + +@table @asis +@item @code{:prepend} +Normally new captured information will be appended at the target +location (last child, last table line, last list item, @dots{}). +Setting this property changes that. + +@item @code{:immediate-finish} +When set, do not offer to edit the information, just file it away +immediately. This makes sense if the template only needs +information that can be added automatically. + +@item @code{:jump-to-captured} +When set, jump to the captured entry when finished. + +@item @code{:empty-lines} +Set this to the number of lines to insert before and after the new +item. Default 0, and the only other common value is 1. + +@item @code{:empty-lines-after} +Set this to the number of lines that should be inserted after the +new item. Overrides @code{:empty-lines} for the number of lines +inserted after. + +@item @code{:empty-lines-before} +Set this to the number of lines that should be inserted before the +new item. Overrides @code{:empty-lines} for the number lines inserted +before. + +@item @code{:clock-in} +Start the clock in this item. + +@item @code{:clock-keep} +Keep the clock running when filing the captured entry. + +@item @code{:clock-resume} +If starting the capture interrupted a clock, restart that clock +when finished with the capture. Note that @code{:clock-keep} has +precedence over @code{:clock-resume}. When setting both to non-@code{nil}, +the current clock will run and the previous one will not be +resumed. + +@item @code{:time-prompt} +Prompt for a date/time to be used for date/week trees and when +filling the template. Without this property, capture uses the +current date and time. Even if this property has not been set, +you can force the same behavior by calling @code{org-capture} with +a @kbd{C-1} prefix argument. + +@item @code{:tree-type} +Use @code{week} to make a week tree instead of the month-day tree, +i.e., place the headings for each day under a heading with the +current ISO week. Use @code{month} to group entries by month +only. Default is to group entries by day. + +@item @code{:unnarrowed} +Do not narrow the target buffer, simply show the full buffer. +Default is to narrow it so that you only see the new material. + +@item @code{:table-line-pos} +Specification of the location in the table where the new line +should be inserted. It should be a string like @samp{II-3} meaning +that the new line should become the third line before the second +horizontal separator line. + +@item @code{:kill-buffer} +If the target file was not yet visited when capture was invoked, +kill the buffer again after capture is completed. + +@item @code{:no-save} +Do not save the target file after finishing the capture. + +@item ~:refile-targets +Temporarily set @code{org-refile-targets} to the +value of this property. +@end table +@end table + +@node Template expansion +@subsubsection Template expansion + +In the template itself, special ``%-escapes''@footnote{If you need one of these sequences literally, escape the @samp{%} +with a backslash.} allow dynamic +insertion of content. The templates are expanded in the order given +here: + +@table @asis +@item @samp{%[FILE]} +Insert the contents of the file given by @var{FILE}. + +@item @samp{%(EXP)} +Evaluate Elisp expression @var{EXP} and replace it with the +result. The @var{EXP} form must return a string. Only +placeholders pre-existing within the template, or introduced with +@samp{%[file]}, are expanded this way. Since this happens after +expanding non-interactive ``%-escapes'', those can be used to fill the +expression. + +@item @samp{%} +The result of format-time-string on the @var{FORMAT} +specification. + +@item @samp{%t} +Timestamp, date only. + +@item @samp{%T} +Timestamp, with date and time. + +@item @samp{%u}, @samp{%U} +Like @samp{%t}, @samp{%T} above, but inactive timestamps. + +@item @samp{%i} +Initial content, the region when capture is called while the region +is active. If there is text before @samp{%i} on the same line, such as +indentation, and @samp{%i} is not inside a @samp{%(exp)} form, that prefix is +added before every line in the inserted text. + +@item @samp{%a} +Annotation, normally the link created with @code{org-store-link}. + +@item @samp{%A} +Like @samp{%a}, but prompt for the description part. + +@item @samp{%l} +Like @samp{%a}, but only insert the literal link. + +@item @samp{%L} +Like @samp{%l}, but without brackets (the link content itself). + +@item @samp{%c} +Current kill ring head. + +@item @samp{%x} +Content of the X clipboard. + +@item @samp{%k} +Title of the currently clocked task. + +@item @samp{%K} +Link to the currently clocked task. + +@item @samp{%n} +User name (taken from @code{user-full-name}). + +@item @samp{%f} +File visited by current buffer when org-capture was called. + +@item @samp{%F} +Full path of the file or directory visited by current buffer. + +@item @samp{%:keyword} +Specific information for certain link types, see below. + +@item @samp{%^g} +Prompt for tags, with completion on tags in target file. + +@item @samp{%^G} +Prompt for tags, with completion all tags in all agenda files. + +@item @samp{%^t} +Like @samp{%t}, but prompt for date. Similarly @samp{%^T}, @samp{%^u}, @samp{%^U}. You +may define a prompt like @samp{%^@{Birthday@}t}. + +@item @samp{%^C} +Interactive selection of which kill or clip to use. + +@item @samp{%^L} +Like @samp{%^C}, but insert as link. + +@item @samp{%^@{PROP@}p} +Prompt the user for a value for property @var{PROP}. You may +specify a default value with @samp{%^@{PROP|default@}}. + +@item @samp{%^@{PROMPT@}} +Prompt the user for a string and replace this sequence with it. You +may specify a default value and a completion table with +@samp{%^@{prompt|default|completion2|completion3...@}}. The arrow keys +access a prompt-specific history. + +@item @samp{%\N} +Insert the text entered at the @var{N}th @samp{%^@{PROMPT@}}, where +@var{N} is a number, starting from 1. + +@item @samp{%?} +After completing the template, position point here. +@end table + +@vindex org-store-link-props +For specific link types, the following keywords are defined@footnote{If you define your own link types (see @ref{Adding Hyperlink Types}), any property you store with @code{org-store-link-props} can be +accessed in capture templates in a similar way.}: + +@vindex org-link-from-user-regexp +@multitable {aaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@headitem Link type +@tab Available keywords +@item bbdb +@tab @samp{%:name}, @samp{%:company} +@item irc +@tab @samp{%:server}, @samp{%:port}, @samp{%:nick} +@item mh, rmail +@tab @samp{%:type}, @samp{%:subject}, @samp{%:message-id} +@item +@tab @samp{%:from}, @samp{%:fromname}, @samp{%:fromaddress} +@item +@tab @samp{%:to}, @samp{%:toname}, @samp{%:toaddress} +@item +@tab @samp{%:date} (message date header field) +@item +@tab @samp{%:date-timestamp} (date as active timestamp) +@item +@tab @samp{%:date-timestamp-inactive} (date as inactive timestamp) +@item +@tab @samp{%:fromto} (either ``to NAME'' or ``from NAME'')@footnote{This is always the other, not the user. See the variable +@code{org-link-from-user-regexp}.} +@item gnus +@tab @samp{%:group}, for messages also all email fields +@item w3, w3m +@tab @samp{%:url} +@item info +@tab @samp{%:file}, @samp{%:node} +@item calendar +@tab @samp{%:date} +@item org-protocol +@tab @samp{%:link}, @samp{%:description}, @samp{%:annotation} +@end multitable + +@node Templates in contexts +@subsubsection Templates in contexts + +@vindex org-capture-templates-contexts +To control whether a capture template should be accessible from +a specific context, you can customize +@code{org-capture-templates-contexts}. Let's say, for example, that you +have a capture template ``p'' for storing Gnus emails containing +patches. Then you would configure this option like this: + +@lisp +(setq org-capture-templates-contexts + '(("p" ((in-mode . "message-mode"))))) +@end lisp + +You can also tell that the command key @kbd{p} should refer to +another template. In that case, add this command key like this: + +@lisp +(setq org-capture-templates-contexts + '(("p" "q" ((in-mode . "message-mode"))))) +@end lisp + +See the docstring of the variable for more information. + +@node Attachments +@section Attachments + +@cindex attachments + +It is often useful to associate reference material with an outline +node. Small chunks of plain text can simply be stored in the subtree +of a project. Hyperlinks (see @ref{Hyperlinks}) can establish associations +with files that live elsewhere on a local, or even remote, computer, +like emails or source code files belonging to a project. + +Another method is @emph{attachments}, which are files located in a +directory belonging to an outline node. Org uses directories either +named by a unique ID of each entry, or by a @samp{DIR} property. + +@menu +* Attachment defaults and dispatcher:: How to access attachment commands +* Attachment options:: Configuring the attachment system +* Attachment links:: Hyperlink access to attachments +* Automatic version-control with Git:: Everything safely stored away +* Attach from Dired:: Using dired to select an attachment +@end menu + +@node Attachment defaults and dispatcher +@subsection Attachment defaults and dispatcher + +By default, Org attach uses ID properties when adding attachments to +outline nodes. This makes working with attachments fully automated. +There is no decision needed for folder-name or location. ID-based +directories are by default located in the @samp{data/} directory, which +lives in the same directory where your Org file lives@footnote{If you move entries or Org files from one directory to +another, you may want to configure @code{org-attach-id-dir} to contain +an absolute path.}. + +When attachments are made using @code{org-attach} a default tag @samp{ATTACH} is +added to the node that gets the attachments. + +For more control over the setup, see @ref{Attachment options}. + +The following commands deal with attachments: + +@table @asis +@item @kbd{C-c C-a} (@code{org-attach}) +@kindex C-c C-a +@findex org-attach +The dispatcher for commands related to the attachment system. After +these keys, a list of commands is displayed and you must press an +additional key to select a command: + +@table @asis +@item @kbd{a} (@code{org-attach-attach}) +@kindex C-c C-a a +@findex org-attach-attach +@vindex org-attach-method +Select a file and move it into the task's attachment directory. +The file is copied, moved, or linked, depending on +@code{org-attach-method}. Note that hard links are not supported on +all systems. + +@item @kbd{c}/@kbd{m}/@kbd{l} +@kindex C-c C-a c +@kindex C-c C-a m +@kindex C-c C-a l +Attach a file using the copy/move/link method. Note that hard +links are not supported on all systems. + +@item @kbd{b} (@code{org-attach-buffer}) +@kindex C-c C-a b +@findex org-attach-buffer +Select a buffer and save it as a file in the task's attachment +directory. + +@item @kbd{n} (@code{org-attach-new}) +@kindex C-c C-a n +@findex org-attach-new +Create a new attachment as an Emacs buffer. + +@item @kbd{z} (@code{org-attach-sync}) +@kindex C-c C-a z +@findex org-attach-sync +Synchronize the current task with its attachment directory, in +case you added attachments yourself. + +@item @kbd{o} (@code{org-attach-open}) +@kindex C-c C-a o +@findex org-attach-open +@vindex org-file-apps +Open current task's attachment. If there is more than one, prompt +for a file name first. Opening follows the rules set by +@code{org-file-apps}. For more details, see the information on +following hyperlinks (see @ref{Handling Links}). + +@item @kbd{O} (@code{org-attach-open-in-emacs}) +@kindex C-c C-a O +@findex org-attach-open-in-emacs +Also open the attachment, but force opening the file in Emacs. + +@item @kbd{f} (@code{org-attach-reveal}) +@kindex C-c C-a f +@findex org-attach-reveal +Open the current task's attachment directory. + +@item @kbd{F} (@code{org-attach-reveal-in-emacs}) +@kindex C-c C-a F +@findex org-attach-reveal-in-emacs +Also open the directory, but force using Dired in Emacs. + +@item @kbd{d} (@code{org-attach-delete-one}) +@kindex C-c C-a d +Select and delete a single attachment. + +@item @kbd{D} (@code{org-attach-delete-all}) +@kindex C-c C-a D +Delete all of a task's attachments. A safer way is to open the +directory in Dired and delete from there. + +@item @kbd{s} (@code{org-attach-set-directory}) +@kindex C-c C-a s +@cindex @samp{DIR}, property +Set a specific directory as the entry's attachment directory. +This works by putting the directory path into the @samp{DIR} +property. + +@item @kbd{S} (@code{org-attach-unset-directory}) +@kindex C-c C-a S +@cindex @samp{DIR}, property +Remove the attachment directory. This command removes the @samp{DIR} +property and asks the user to either move content inside that +folder, if an @samp{ID} property is set, delete the content, or to +leave the attachment directory as is but no longer attached to the +outline node. +@end table +@end table + +@node Attachment options +@subsection Attachment options + +There are a couple of options for attachments that are worth +mentioning. + +@table @asis +@item @code{org-attach-id-dir} +@vindex org-attach-id-dir +The directory where attachments are stored when @samp{ID} is used as +method. + +@item @code{org-attach-dir-relative} +@vindex org-attach-dir-relative +When setting the @samp{DIR} property on a node using @kbd{C-c C-a s} +(@code{org-attach-set-directory}), absolute links are entered by default. +This option changes that to relative links. + +@item @code{org-attach-use-inheritance} +@vindex org-attach-use-inheritance +By default folders attached to an outline node are inherited from +parents according to @code{org-use-property-inheritance}. If one instead +want to set inheritance specifically for Org attach that can be done +using @code{org-attach-use-inheritance}. Inheriting documents through +the node hierarchy makes a lot of sense in most cases. Especially +when using attachment links (see @ref{Attachment links}). The following +example shows one use case for attachment inheritance: + +@example +* Chapter A ... + :PROPERTIES: + :DIR: Chapter A/ + :END: +** Introduction +Some text + +#+NAME: Image 1 +[[attachment:image 1.jpg]] +@end example + +Without inheritance one would not be able to resolve the link to +@samp{image 1.jpg}, since the link is inside a sub-heading to @samp{Chapter + A}. + +Inheritance works the same way for both @samp{ID} and @samp{DIR} property. If +both properties are defined on the same headline then @samp{DIR} takes +precedence. This is also true if inheritance is enabled. If @samp{DIR} +is inherited from a parent node in the outline, that property still +takes precedence over an @samp{ID} property defined on the node itself. + +@item @code{org-attach-method} +@vindex org-attach-method +When attaching files using the dispatcher @kbd{C-c C-a} it +defaults to copying files. The behavior can be changed by +customizing @code{org-attach-method}. Options are Copy, Move/Rename, +Hard link or Symbolic link. + +@item @code{org-attach-preferred-new-method} +@vindex org-attach-preferred-new-method +This customization lets you choose the default way to attach to +nodes without existing @samp{ID} and @samp{DIR} property. It defaults to @code{id} +but can also be set to @code{dir}, @code{ask} or @code{nil}. + +@item @code{org-attach-archive-delete} +@vindex org-attach-archive-delete +Configure this to determine if attachments should be deleted or not +when a subtree that has attachments is archived. + +@item @code{org-attach-auto-tag} +@vindex org-attach-auto-tag +When attaching files to a heading it will be assigned a tag +according to what is set here. + +@item @code{org-attach-id-to-path-function-list} +@vindex org-attach-id-to-path-function-list +When @samp{ID} is used for attachments, the ID is parsed into a part of a +directory-path. See @code{org-attach-id-uuid-folder-format} for the +default function. Define a new one and add it as first element in +@code{org-attach-id-to-path-function-list} if you want the folder +structure in any other way. All functions in this list will be +tried when resolving existing ID's into paths, to maintain backward +compatibility with existing folders in your system. + +@item @code{org-attach-store-link-p} +@vindex org-attach-store-link-p +Stores a link to the file that is being attached. The link is +stored in @code{org-stored-links} for later insertion with @kbd{C-c C-l} (see @ref{Handling Links}). Depending on what option is set in +@code{org-attach-store-link-p}, the link is stored to either the original +location as a file link, the attachment location as an attachment +link or to the attachment location as a file link. + +@item @code{org-attach-commands} +@vindex org-attach-commands +List of all commands used in the attach dispatcher. + +@item @code{org-attach-expert} +@vindex org-attach-expert +Do not show the splash buffer with the attach dispatcher when +@code{org-attach-expert} is set to non-@code{nil}. +@end table + +See customization group @samp{Org Attach} if you want to change the +default settings. + +@node Attachment links +@subsection Attachment links + +Attached files and folders can be referenced using attachment links. +This makes it easy to refer to the material added to an outline node. +Especially if it was attached using the unique ID of the entry! + +@example +* TODO Some task + :PROPERTIES: + :ID: 95d50008-c12e-479f-a4f2-cc0238205319 + :END: +See attached document for more information: [[attachment:info.org]] +@end example + +See @ref{External Links} for more information about these links. + +@node Automatic version-control with Git +@subsection Automatic version-control with Git + +If the directory attached to an outline node is a Git repository, Org +can be configured to automatically commit changes to that repository +when it sees them. + +To make Org mode take care of versioning of attachments for you, add +the following to your Emacs config: + +@lisp +(require 'org-attach-git) +@end lisp + +@node Attach from Dired +@subsection Attach from Dired + +@cindex attach from Dired +@findex org-attach-dired-to-subtree + +It is possible to attach files to a subtree from a Dired buffer. To +use this feature, have one window in Dired mode containing the file(s) +to be attached and another window with point in the subtree that shall +get the attachments. In the Dired window, with point on a file, +@kbd{M-x org-attach-dired-to-subtree} attaches the file to the +subtree using the attachment method set by variable +@code{org-attach-method}. When files are marked in the Dired window then +all marked files get attached. + +Add the following lines to the Emacs init file to have @kbd{C-c C-x a} attach files in Dired buffers. + +@lisp +(add-hook 'dired-mode-hook + (lambda () + (define-key dired-mode-map + (kbd "C-c C-x a") + #'org-attach-dired-to-subtree))) +@end lisp + +The following code shows how to bind the previous command with +a specific attachment method. + +@lisp +(add-hook 'dired-mode-hook + (lambda () + (define-key dired-mode-map (kbd "C-c C-x c") + (lambda () + (interactive) + (let ((org-attach-method 'cp)) + (call-interactively #'org-attach-dired-to-subtree)))))) +@end lisp + +@node RSS Feeds +@section RSS Feeds + +@cindex RSS feeds +@cindex Atom feeds + +Org can add and change entries based on information found in RSS feeds +and Atom feeds. You could use this to make a task out of each new +podcast in a podcast feed. Or you could use a phone-based +note-creating service on the web to import tasks into Org. To access +feeds, configure the variable @code{org-feed-alist}. The docstring of this +variable has detailed information. With the following + +@lisp +(setq org-feed-alist + '(("Slashdot" + "https://rss.slashdot.org/Slashdot/slashdot" + "~/txt/org/feeds.org" "Slashdot Entries"))) +@end lisp + +@noindent +new items from the feed provided by @samp{rss.slashdot.org} result in new +entries in the file @samp{~/org/feeds.org} under the heading @samp{Slashdot +Entries}, whenever the following command is used: + +@table @asis +@item @kbd{C-c C-x g} (@code{org-feed-update-all}) +@kindex C-c C-x g +Collect items from the feeds configured in @code{org-feed-alist} and act +upon them. + +@item @kbd{C-c C-x G} (@code{org-feed-goto-inbox}) +@kindex C-c C-x G +Prompt for a feed name and go to the inbox configured for this feed. +@end table + +Under the same headline, Org creates a drawer @samp{FEEDSTATUS} in which it +stores information about the status of items in the feed, to avoid +adding the same item several times. + +For more information, including how to read atom feeds, see +@samp{org-feed.el} and the docstring of @code{org-feed-alist}. + +@node Agenda Views +@chapter Agenda Views + +@cindex agenda views + +Due to the way Org works, TODO items, time-stamped items, and tagged +headlines can be scattered throughout a file or even a number of +files. To get an overview of open action items, or of events that are +important for a particular date, this information must be collected, +sorted and displayed in an organized way. + +Org can select items based on various criteria and display them in +a separate buffer. Six different view types are provided: + +@itemize +@item +an @emph{agenda} that is like a calendar and shows information for +specific dates, + +@item +a @emph{TODO list} that covers all unfinished action items, + +@item +a @emph{match view}, showings headlines based on the tags, properties, +and TODO state associated with them, + +@item +a @emph{text search view} that shows all entries from multiple files that +contain specified keywords, + +@item +a @emph{stuck projects view} showing projects that currently do not move +along, and + +@item +@emph{custom views} that are special searches and combinations of +different views. +@end itemize + +The extracted information is displayed in a special @emph{agenda buffer}. +This buffer is read-only, but provides commands to visit the +corresponding locations in the original Org files, and even to edit +these files remotely. + +@vindex org-agenda-skip-comment-trees +@vindex org-agenda-skip-archived-trees +@cindex commented entries, in agenda views +@cindex archived entries, in agenda views +By default, the report ignores commented (see @ref{Comment Lines}) and +archived (see @ref{Internal archiving}) entries. You can override this by +setting @code{org-agenda-skip-comment-trees} and +@code{org-agenda-skip-archived-trees} to @code{nil}. + +@vindex org-agenda-window-setup +@vindex org-agenda-restore-windows-after-quit +Two variables control how the agenda buffer is displayed and whether +the window configuration is restored when the agenda exits: +@code{org-agenda-window-setup} and @code{org-agenda-restore-windows-after-quit}. + +@menu +* Agenda Files:: Files being searched for agenda information. +* Agenda Dispatcher:: Keyboard access to agenda views. +* Built-in Agenda Views:: What is available out of the box? +* Presentation and Sorting:: How agenda items are prepared for display. +* Agenda Commands:: Remote editing of Org trees. +* Custom Agenda Views:: Defining special searches and views. +* Exporting Agenda Views:: Writing a view to a file. +* Agenda Column View:: Using column view for collected entries. +@end menu + +@node Agenda Files +@section Agenda Files + +@cindex agenda files +@cindex files for agenda + +@vindex org-agenda-files +The information to be shown is normally collected from all @emph{agenda +files}, the files listed in the variable @code{org-agenda-files}@footnote{If the value of that variable is not a list, but a single file +name, then the list of agenda files in maintained in that external +file.}. +If a directory is part of this list, all files with the extension +@samp{.org} in this directory are part of the list. + +Thus, even if you only work with a single Org file, that file should +be put into the list@footnote{When using the dispatcher, pressing @kbd{<} before +selecting a command actually limits the command to the current file, +and ignores @code{org-agenda-files} until the next dispatcher command.}. You can customize @code{org-agenda-files}, +but the easiest way to maintain it is through the following commands + +@table @asis +@item @kbd{C-c [} (@code{org-agenda-file-to-front}) +@kindex C-c [ +@findex org-agenda-file-to-front +@cindex files, adding to agenda list +Add current file to the list of agenda files. The file is added to +the front of the list. If it was already in the list, it is moved +to the front. With a prefix argument, file is added/moved to the +end. + +@item @kbd{C-c ]} (@code{org-remove-file}) +@kindex C-c ] +@findex org-remove-file +Remove current file from the list of agenda files. + +@item @kbd{C-'} +@itemx @kbd{C-,} (@code{org-cycle-agenda-files}) +@kindex C-' +@kindex C-, +@findex org-cycle-agenda-files +@cindex cycling, of agenda files +Cycle through agenda file list, visiting one file after the other. + +@item @kbd{M-x org-switchb} +@findex org-switchb +Command to use an Iswitchb-like interface to switch to and between +Org buffers. +@end table + +@noindent +The Org menu contains the current list of files and can be used to +visit any of them. + +If you would like to focus the agenda temporarily on a file not in +this list, or on just one file in the list, or even on only a subtree +in a file, then this can be done in different ways. For a single +agenda command, you may press @kbd{<} once or several times in +the dispatcher (see @ref{Agenda Dispatcher}). To restrict the agenda +scope for an extended period, use the following commands: + +@table @asis +@item @kbd{C-c C-x <} (@code{org-agenda-set-restriction-lock}) +@kindex C-c C-x < +@findex org-agenda-set-restriction-lock +Restrict the agenda to the current subtree. If there already is +a restriction at point, remove it. When called with a universal +prefix argument or with point before the first headline in a file, +set the agenda scope to the entire file. This restriction remains +in effect until removed with @kbd{C-c C-x >}, or by typing +either @kbd{<} or @kbd{>} in the agenda dispatcher. If +there is a window displaying an agenda view, the new restriction +takes effect immediately. + +@item @kbd{C-c C-x >} (@code{org-agenda-remove-restriction-lock}) +@kindex C-c C-x > +@findex org-agenda-remove-restriction-lock +Remove the restriction created by @kbd{C-c C-x <}. +@end table + +When working with Speedbar, you can use the following commands in the +Speedbar frame: + +@table @asis +@item @kbd{<} (@code{org-speedbar-set-agenda-restriction}) +@findex org-speedbar-set-agenda-restriction +Restrict the agenda to the item---either an Org file or a subtree in +such a file---at point in the Speedbar frame. If agenda is already +restricted there, remove the restriction. If there is a window +displaying an agenda view, the new restriction takes effect +immediately. + +@item @kbd{>} (@code{org-agenda-remove-restriction-lock}) +@findex org-agenda-remove-restriction-lock +Remove the restriction. +@end table + +@node Agenda Dispatcher +@section The Agenda Dispatcher + +@cindex agenda dispatcher +@cindex dispatching agenda commands + +The views are created through a dispatcher, accessible with @kbd{M-x org-agenda}, or, better, bound to a global key (see @ref{Activation}). +It displays a menu from which an additional letter is required to +execute a command. The dispatcher offers the following default +commands: + +@table @asis +@item @kbd{a} +Create the calendar-like agenda (see @ref{Weekly/daily agenda}). + +@item @kbd{t} +@itemx @kbd{T} +Create a list of all TODO items (see @ref{Global TODO list}). + +@item @kbd{m} +@itemx @kbd{M} +Create a list of headlines matching a given expression (see +@ref{Matching tags and properties}). + +@item @kbd{s} +@kindex s @r{(Agenda dispatcher)} +Create a list of entries selected by a boolean expression of +keywords and/or regular expressions that must or must not occur in +the entry. + +@item @kbd{/} +@kindex / @r{(Agenda dispatcher)} +@vindex org-agenda-text-search-extra-files +Search for a regular expression in all agenda files and additionally +in the files listed in @code{org-agenda-text-search-extra-files}. This +uses the Emacs command @code{multi-occur}. A prefix argument can be used +to specify the number of context lines for each match, default is +@enumerate +@item +@end enumerate + +@item @kbd{#} +Create a list of stuck projects (see @ref{Stuck projects}). + +@item @kbd{!} +Configure the list of stuck projects (see @ref{Stuck projects}). + +@item @kbd{<} +@kindex < @r{(Agenda dispatcher)} +Restrict an agenda command to the current buffer@footnote{For backward compatibility, you can also press @kbd{1} to +restrict to the current buffer.}. If +narrowing is in effect restrict to the narrowed part of the buffer. +After pressing @kbd{<}, you still need to press the character +selecting the command. + +@item @kbd{< <} +@kindex < < @r{(Agenda dispatcher)} +If there is an active region, restrict the following agenda command +to the region. Otherwise, restrict it to the current +subtree@footnote{For backward compatibility, you can also press @kbd{0} to +restrict to the current region/subtree.}. After pressing @kbd{< <}, you still need to +press the character selecting the command. + +@item @kbd{*} +@kindex * @r{(Agenda dispatcher)} +@vindex org-agenda-sticky +@findex org-toggle-sticky-agenda +Toggle sticky agenda views. By default, Org maintains only a single +agenda buffer and rebuilds it each time you change the view, to make +sure everything is always up to date. If you switch between views +often and the build time bothers you, you can turn on sticky agenda +buffers (make this the default by customizing the variable +@code{org-agenda-sticky}). With sticky agendas, the dispatcher only +switches to the selected view, you need to update it by hand with +@kbd{r} or @kbd{g}. You can toggle sticky agenda view any +time with @code{org-toggle-sticky-agenda}. +@end table + +You can also define custom commands that are accessible through the +dispatcher, just like the default commands. This includes the +possibility to create extended agenda buffers that contain several +blocks together, for example the weekly agenda, the global TODO list +and a number of special tags matches. See @ref{Custom Agenda Views}. + +@node Built-in Agenda Views +@section The Built-in Agenda Views + +In this section we describe the built-in views. + +@menu +* Weekly/daily agenda:: The calendar page with current tasks. +* Global TODO list:: All unfinished action items. +* Matching tags and properties:: Structured information with fine-tuned search. +* Search view:: Find entries by searching for text. +* Stuck projects:: Find projects you need to review. +@end menu + +@node Weekly/daily agenda +@subsection Weekly/daily agenda + +@cindex agenda +@cindex weekly agenda +@cindex daily agenda + +The purpose of the weekly/daily @emph{agenda} is to act like a page of +a paper agenda, showing all the tasks for the current week or day. + +@table @asis +@item @kbd{M-x org-agenda a} (@code{org-agenda-list}) +@kindex a @r{(Agenda dispatcher)} +@findex org-agenda-list +@cindex org-agenda, command +Compile an agenda for the current week from a list of Org files. +The agenda shows the entries for each day. With a numeric prefix +argument@footnote{For backward compatibility, the universal prefix argument +@kbd{C-u} causes all TODO entries to be listed before the agenda. +This feature is deprecated, use the dedicated TODO list, or a block +agenda instead (see @ref{Block agenda}).}---like @kbd{C-u 2 1 M-x org-agenda a}---you may +set the number of days to be displayed. +@end table + +@vindex org-agenda-span +@vindex org-agenda-start-day +@vindex org-agenda-start-on-weekday +The default number of days displayed in the agenda is set by the +variable @code{org-agenda-span}. This variable can be set to any number of +days you want to see by default in the agenda, or to a span name, such +a @code{day}, @code{week}, @code{month} or @code{year}. For weekly agendas, the default +is to start on the previous Monday (see +@code{org-agenda-start-on-weekday}). You can also set the start date using +a date shift: @samp{(setq org-agenda-start-day "+10d")} starts the agenda +ten days from today in the future. + +Remote editing from the agenda buffer means, for example, that you can +change the dates of deadlines and appointments from the agenda buffer. +The commands available in the Agenda buffer are listed in @ref{Agenda Commands}. + +@anchor{Calendar/Diary integration} +@subsubheading Calendar/Diary integration + +@cindex calendar integration +@cindex diary integration + +Emacs contains the calendar and diary by Edward@tie{}M@.@tie{}Reingold. The +calendar displays a three-month calendar with holidays from different +countries and cultures. The diary allows you to keep track of +anniversaries, lunar phases, sunrise/set, recurrent appointments +(weekly, monthly) and more. In this way, it is quite complementary to +Org. It can be very useful to combine output from Org with the diary. + +In order to include entries from the Emacs diary into Org mode's +agenda, you only need to customize the variable + +@lisp +(setq org-agenda-include-diary t) +@end lisp + +@noindent +After that, everything happens automatically. All diary entries +including holidays, anniversaries, etc., are included in the agenda +buffer created by Org mode. @kbd{@key{SPC}}, @kbd{@key{TAB}}, and +@kbd{@key{RET}} can be used from the agenda buffer to jump to the diary +file in order to edit existing diary entries. The @kbd{i} +command to insert new entries for the current date works in the agenda +buffer, as well as the commands @kbd{S}, @kbd{M}, and +@kbd{C} to display Sunrise/Sunset times, show lunar phases and to +convert to other calendars, respectively. @kbd{c} can be used to +switch back and forth between calendar and agenda. + +If you are using the diary only for expression entries and holidays, +it is faster to not use the above setting, but instead to copy or even +move the entries into an Org file. Org mode evaluates diary-style +expression entries, and does it faster because there is no overhead +for first creating the diary display. Note that the expression +entries must start at the left margin, no whitespace is allowed before +them, as seen in the following segment of an Org file:@footnote{The variable @code{org-anniversary} used in the example is just +like @code{diary-anniversary}, but the argument order is always according +to ISO and therefore independent of the value of +@code{calendar-date-style}.} + +@example +* Holidays + :PROPERTIES: + :CATEGORY: Holiday + :END: +%%(org-calendar-holiday) ; special function for holiday names + +* Birthdays + :PROPERTIES: + :CATEGORY: Ann + :END: +%%(org-anniversary 1956 5 14) Arthur Dent is %d years old +%%(org-anniversary 1869 10 2) Mahatma Gandhi would be %d years old +@end example + +@anchor{Anniversaries from BBDB} +@subsubheading Anniversaries from BBDB + +@cindex BBDB, anniversaries +@cindex anniversaries, from BBDB + +@findex org-bbdb-anniversaries +If you are using the Insidious Big Brother Database to store your +contacts, you very likely prefer to store anniversaries in BBDB rather +than in a separate Org or diary file. Org supports this and can show +BBDB anniversaries as part of the agenda. All you need to do is to +add the following to one of your agenda files: + +@example +* Anniversaries + :PROPERTIES: + :CATEGORY: Anniv + :END: +%%(org-bbdb-anniversaries) +@end example + +You can then go ahead and define anniversaries for a BBDB record. +Basically, you need a field named @samp{anniversary} for the BBDB record +which contains the date in the format @samp{YYYY-MM-DD} or @samp{MM-DD}, +followed by a space and the class of the anniversary (@samp{birthday}, +@samp{wedding}, or a format string). If you omit the class, it defaults to +@samp{birthday}. Here are a few examples, the header for the file +@samp{ol-bbdb.el} contains more detailed information. + +@example +1973-06-22 +06-22 +1955-08-02 wedding +2008-04-14 %s released version 6.01 of Org mode, %d years ago +@end example + +After a change to BBDB, or for the first agenda display during an +Emacs session, the agenda display suffers a short delay as Org updates +its hash with anniversaries. However, from then on things will be +very fast, much faster in fact than a long list of +@samp{%%(diary-anniversary)} entries in an Org or Diary file. + +@findex org-bbdb-anniversaries-future +If you would like to see upcoming anniversaries with a bit of +forewarning, you can use the following instead: + +@example +* Anniversaries + :PROPERTIES: + :CATEGORY: Anniv + :END: +%%(org-bbdb-anniversaries-future 3) +@end example + +That will give you three days' warning: on the anniversary date itself +and the two days prior. The argument is optional: if omitted, it +defaults to 7. + +@anchor{Appointment reminders} +@subsubheading Appointment reminders + +@cindex @file{appt.el} +@cindex appointment reminders +@cindex appointment +@cindex reminders + +@cindex APPT_WARNTIME, keyword +Org can interact with Emacs appointments notification facility. To +add the appointments of your agenda files, use the command +@code{org-agenda-to-appt}. This command lets you filter through the list +of your appointments and add only those belonging to a specific +category or matching a regular expression. It also reads +a @samp{APPT_WARNTIME} property which overrides the value of +@code{appt-message-warning-time} for this appointment. See the docstring +for details. + +@node Global TODO list +@subsection The global TODO list + +@cindex global TODO list +@cindex TODO list, global + +The global TODO list contains all unfinished TODO items formatted and +collected into a single place. + +@table @asis +@item @kbd{M-x org-agenda t} (@code{org-todo-list}) +@kindex t @r{(Agenda dispatcher)} +@findex org-todo-list +Show the global TODO list. This collects the TODO items from all +agenda files (see @ref{Agenda Views}) into a single buffer. By default, +this lists items with a state the is not a DONE state. The buffer +is in Agenda mode, so there are commands to examine and manipulate +the TODO entries directly from that buffer (see @ref{Agenda Commands}). + +@item @kbd{M-x org-agenda T} (@code{org-todo-list}) +@kindex T @r{(Agenda dispatcher)} +@findex org-todo-list +@cindex TODO keyword matching +@vindex org-todo-keywords +Like the above, but allows selection of a specific TODO keyword. +You can also do this by specifying a prefix argument to +@kbd{t}. You are prompted for a keyword, and you may also +specify several keywords by separating them with @samp{|} as the boolean +OR operator. With a numeric prefix, the Nth keyword in +@code{org-todo-keywords} is selected. + +@kindex r +The @kbd{r} key in the agenda buffer regenerates it, and you +can give a prefix argument to this command to change the selected +TODO keyword, for example @kbd{3 r}. If you often need +a search for a specific keyword, define a custom command for it (see +@ref{Agenda Dispatcher}). + +Matching specific TODO keywords can also be done as part of a tags +search (see @ref{Tag Searches}). +@end table + +Remote editing of TODO items means that you can change the state of +a TODO entry with a single key press. The commands available in the +TODO list are described in @ref{Agenda Commands}. + +@cindex sublevels, inclusion into TODO list +Normally the global TODO list simply shows all headlines with TODO +keywords. This list can become very long. There are two ways to keep +it more compact: + +@itemize +@item +@vindex org-agenda-todo-ignore-scheduled +@vindex org-agenda-todo-ignore-deadlines +@vindex org-agenda-todo-ignore-timestamp +@vindex org-agenda-todo-ignore-with-date +Some people view a TODO item that has been @emph{scheduled} for execution +or have a @emph{deadline} (see @ref{Timestamps}) as no longer @emph{open}. +Configure the variables @code{org-agenda-todo-ignore-scheduled} to +exclude some or all scheduled items from the global TODO list, +@code{org-agenda-todo-ignore-deadlines} to exclude some or all items with +a deadline set, @code{org-agenda-todo-ignore-timestamp} to exclude some +or all items with an active timestamp other than a DEADLINE or +a SCHEDULED timestamp and/or @code{org-agenda-todo-ignore-with-date} to +exclude items with at least one active timestamp. + +@item +@vindex org-agenda-todo-list-sublevels +TODO items may have sublevels to break up the task into subtasks. +In such cases it may be enough to list only the highest level TODO +headline and omit the sublevels from the global list. Configure the +variable @code{org-agenda-todo-list-sublevels} to get this behavior. +@end itemize + +@node Matching tags and properties +@subsection Matching tags and properties + +@cindex matching, of tags +@cindex matching, of properties +@cindex tags view +@cindex match view + +If headlines in the agenda files are marked with @emph{tags} (see @ref{Tags}), +or have properties (see @ref{Properties and Columns}), you can select +headlines based on this metadata and collect them into an agenda +buffer. The match syntax described here also applies when creating +sparse trees with @kbd{C-c / m}. + +@table @asis +@item @kbd{M-x org-agenda m} (@code{org-tags-view}) +@kindex m @r{(Agenda dispatcher)} +@findex org-tags-view +Produce a list of all headlines that match a given set of tags. The +command prompts for a selection criterion, which is a boolean logic +expression with tags, like @samp{+work+urgent-withboss} or @samp{work|home} +(see @ref{Tags}). If you often need a specific search, define a custom +command for it (see @ref{Agenda Dispatcher}). + +@item @kbd{M-x org-agenda M} (@code{org-tags-view}) +@kindex M @r{(Agenda dispatcher)} +@findex org-tags-view +@vindex org-tags-match-list-sublevels +@vindex org-agenda-tags-todo-honor-ignore-options +Like @kbd{m}, but only select headlines that are also TODO +items and force checking subitems (see the variable +@code{org-tags-match-list-sublevels}). To exclude scheduled/deadline +items, see the variable @code{org-agenda-tags-todo-honor-ignore-options}. +Matching specific TODO keywords together with a tags match is also +possible, see @ref{Tag Searches}. +@end table + +The commands available in the tags list are described in @ref{Agenda Commands}. + +@cindex boolean logic, for agenda searches +A search string can use Boolean operators @samp{&} for AND and @samp{|} for OR@. +@samp{&} binds more strongly than @samp{|}. Parentheses are currently not +implemented. Each element in the search is either a tag, a regular +expression matching tags, or an expression like @samp{PROPERTY OPERATOR +VALUE} with a comparison operator, accessing a property value. Each +element may be preceded by @samp{-} to select against it, and @samp{+} is +syntactic sugar for positive selection. The AND operator @samp{&} is +optional when @samp{+} or @samp{-} is present. Here are some examples, using +only tags. + +@table @asis +@item @samp{+work-boss} +Select headlines tagged @samp{work}, but discard those also tagged +@samp{boss}. + +@item @samp{work|laptop} +Selects lines tagged @samp{work} or @samp{laptop}. + +@item @samp{work|laptop+night} +Like before, but require the @samp{laptop} lines to be tagged also +@samp{night}. +@end table + +@cindex regular expressions, with tags search +Instead of a tag, you may also specify a regular expression enclosed +in curly braces (see @ref{Regular Expressions}). For example, +@samp{work+@{^boss.*@}} matches headlines that contain the tag @samp{:work:} and +any tag @emph{starting} with @samp{boss}. + +@cindex group tags, as regular expressions +Group tags (see @ref{Tag Hierarchy}) are expanded as regular expressions. +E.g., if @samp{work} is a group tag for the group @samp{:work:lab:conf:}, then +searching for @samp{work} also searches for @samp{@{\(?:work\|lab\|conf\)@}} and +searching for @samp{-work} searches for all headlines but those with one of +the tags in the group (i.e., @samp{-@{\(?:work\|lab\|conf\)@}}). + +@cindex TODO keyword matching, with tags search +@cindex level, for tags/property match +@cindex category, for tags/property match +@vindex org-odd-levels-only +You may also test for properties (see @ref{Properties and Columns}) at the +same time as matching tags. The properties may be real properties, or +special properties that represent other metadata (see @ref{Special Properties}). For example, the property @samp{TODO} represents the TODO +keyword of the entry. Or, the property @samp{LEVEL} represents the level +of an entry. So searching @samp{+LEVEL=3+boss-TODO​="DONE"} lists all level +three headlines that have the tag @samp{boss} and are @emph{not} marked with the +TODO keyword @samp{DONE}. In buffers with @code{org-odd-levels-only} set, +@samp{LEVEL} does not count the number of stars, but @samp{LEVEL=2} corresponds +to 3 stars etc. + +Here are more examples: + +@table @asis +@item @samp{work+TODO​="WAITING"} +Select @samp{work}-tagged TODO lines with the specific TODO keyword +@samp{WAITING}. + +@item @samp{work+TODO​="WAITING"|home+TODO​="WAITING"} +Waiting tasks both at work and at home. +@end table + +When matching properties, a number of different operators can be used +to test the value of a property. Here is a complex example: + +@example ++work-boss+PRIORITY="A"+Coffee="unlimited"+Effort<2 + +With=@{Sarah\|Denny@}+SCHEDULED>="<2008-10-11>" +@end example + +@noindent +The type of comparison depends on how the comparison value is written: + +@itemize +@item +If the comparison value is a plain number, a numerical comparison is +done, and the allowed operators are @samp{<}, @samp{=}, @samp{>}, @samp{<=}, @samp{>=}, and +@samp{<>}. + +@item +If the comparison value is enclosed in double-quotes, a string +comparison is done, and the same operators are allowed. + +@item +If the comparison value is enclosed in double-quotes @emph{and} angular +brackets (like @samp{DEADLINE<​="<2008-12-24 18:30>"}), both values are +assumed to be date/time specifications in the standard Org way, and +the comparison is done accordingly. Valid values also include +@samp{""} for now (including time), @samp{""}, and @samp{""} +for these days at 0:00 hours, i.e., without a time specification. +You can also use strings like @samp{"<+5d>"} or @samp{"<-2m>"} with units @samp{d}, +@samp{w}, @samp{m}, and @samp{y} for day, week, month, and year, respectively. + +@item +If the comparison value is enclosed in curly braces, a regexp match +is performed, with @samp{=} meaning that the regexp matches the property +value, and @samp{<>} meaning that it does not match. +@end itemize + +So the search string in the example finds entries tagged @samp{work} but +not @samp{boss}, which also have a priority value @samp{A}, a @samp{Coffee} property +with the value @samp{unlimited}, an @samp{EFFORT} property that is numerically +smaller than 2, a @samp{With} property that is matched by the regular +expression @samp{Sarah\|Denny}, and that are scheduled on or after October +11, 2008. + +You can configure Org mode to use property inheritance during +a search, but beware that this can slow down searches considerably. +See @ref{Property Inheritance}, for details. + +For backward compatibility, and also for typing speed, there is also +a different way to test TODO states in a search. For this, terminate +the tags/property part of the search string (which may include several +terms connected with @samp{|}) with a @samp{/} and then specify a Boolean +expression just for TODO keywords. The syntax is then similar to that +for tags, but should be applied with care: for example, a positive +selection on several TODO keywords cannot meaningfully be combined +with boolean AND@. However, @emph{negative selection} combined with AND can +be meaningful. To make sure that only lines are checked that actually +have any TODO keyword (resulting in a speed-up), use @kbd{M-x org-agenda M}, or equivalently start the TODO part after the slash +with @samp{!}. Using @kbd{M-x org-agenda M} or @samp{/!} does not match +TODO keywords in a DONE state. Examples: + +@table @asis +@item @samp{work/WAITING} +Same as @samp{work+TODO​="WAITING"}. + +@item @samp{work/!-WAITING-NEXT} +Select @samp{work}-tagged TODO lines that are neither @samp{WAITING} nor +@samp{NEXT}. + +@item @samp{work/!+WAITING|+NEXT} +Select @samp{work}-tagged TODO lines that are either @samp{WAITING} or @samp{NEXT}. +@end table + +@node Search view +@subsection Search view + +@cindex search view +@cindex text search +@cindex searching, for text + +This agenda view is a general text search facility for Org mode +entries. It is particularly useful to find notes. + +@table @asis +@item @kbd{M-x org-agenda s} (@code{org-search-view}) +@kindex s @r{(Agenda dispatcher)} +@findex org-search-view +This is a special search that lets you select entries by matching +a substring or specific words using a boolean logic. +@end table + +For example, the search string @samp{computer equipment} matches entries +that contain @samp{computer equipment} as a substring, even if the two +words are separated by more space or a line break. + +Search view can also search for specific keywords in the entry, using +Boolean logic. The search string @samp{+computer ++wifi -ethernet -@{8\.11[bg]@}} matches note entries that contain the +keywords @samp{computer} and @samp{wifi}, but not the keyword @samp{ethernet}, and +which are also not matched by the regular expression @samp{8\.11[bg]}, +meaning to exclude both @samp{8.11b} and @samp{8.11g}. The first @samp{+} is +necessary to turn on boolean search, other @samp{+} characters are +optional. For more details, see the docstring of the command +@code{org-search-view}. + +You can incrementally and conveniently adjust a boolean search from +the agenda search view with the following keys + +@multitable @columnfractions 0.1 0.6 +@item @kbd{[} +@tab Add a positive search word +@item @kbd{]} +@tab Add a negative search word +@item @kbd{@{} +@tab Add a positive regular expression +@item @kbd{@}} +@tab Add a negative regular expression +@end multitable + +@vindex org-agenda-text-search-extra-files +Note that in addition to the agenda files, this command also searches +the files listed in @code{org-agenda-text-search-extra-files}. + +@node Stuck projects +@subsection Stuck projects + +@pindex GTD, Getting Things Done + +If you are following a system like David Allen's GTD to organize your +work, one of the ``duties'' you have is a regular review to make sure +that all projects move along. A @emph{stuck} project is a project that has +no defined next actions, so it never shows up in the TODO lists Org +mode produces. During the review, you need to identify such projects +and define next actions for them. + +@table @asis +@item @kbd{M-x org-agenda #} (@code{org-agenda-list-stuck-projects}) +@kindex # @r{(Agenda dispatcher)} +@findex org-agenda-list-stuck-projects +List projects that are stuck. + +@item @kbd{M-x org-agenda !} +@kindex ! @r{(Agenda dispatcher)} +@vindex org-stuck-projects +Customize the variable @code{org-stuck-projects} to define what a stuck +project is and how to find it. +@end table + +You almost certainly need to configure this view before it works for +you. The built-in default assumes that all your projects are level-2 +headlines, and that a project is not stuck if it has at least one +entry marked with a TODO keyword @samp{TODO} or @samp{NEXT} or @samp{NEXTACTION}. + +Let's assume that you, in your own way of using Org mode, identify +projects with a tag @samp{:PROJECT:}, and that you use a TODO keyword +@samp{MAYBE} to indicate a project that should not be considered yet. +Let's further assume that the TODO keyword @samp{DONE} marks finished +projects, and that @samp{NEXT} and @samp{TODO} indicate next actions. The tag +@samp{:@@shop:} indicates shopping and is a next action even without the +NEXT tag. Finally, if the project contains the special word @samp{IGNORE} +anywhere, it should not be listed either. In this case you would +start by identifying eligible projects with a tags/TODO match (see +@ref{Tag Searches}) @samp{+PROJECT/-MAYBE-DONE}, and then check for @samp{TODO}, +@samp{NEXT}, @samp{@@shop}, and @samp{IGNORE} in the subtree to identify projects that +are not stuck. The correct customization for this is: + +@lisp +(setq org-stuck-projects + '("+PROJECT/-MAYBE-DONE" ("NEXT" "TODO") ("@@shop") + "\\")) +@end lisp + +Note that if a project is identified as non-stuck, the subtree of this +entry is searched for stuck projects. + +@node Presentation and Sorting +@section Presentation and Sorting + +@cindex presentation, of agenda items + +@vindex org-agenda-prefix-format +@vindex org-agenda-tags-column +Before displaying items in an agenda view, Org mode visually prepares +the items and sorts them. Each item occupies a single line. The line +starts with a @emph{prefix} that contains the @emph{category} (see @ref{Categories}) +of the item and other important information. You can customize in +which column tags are displayed through @code{org-agenda-tags-column}. You +can also customize the prefix using the option +@code{org-agenda-prefix-format}. This prefix is followed by a cleaned-up +version of the outline headline associated with the item. + +@menu +* Categories:: Not all tasks are equal. +* Time-of-day specifications:: How the agenda knows the time. +* Sorting of agenda items:: The order of things. +* Filtering/limiting agenda items:: Dynamically narrow the agenda. +@end menu + +@node Categories +@subsection Categories + +@cindex category +@cindex @samp{CATEGORY}, keyword + +The category is a broad label assigned to each agenda item. By +default, the category is simply derived from the file name, but you +can also specify it with a special line in the buffer, like +this: + +@example +#+CATEGORY: Thesis +@end example + + +@cindex @samp{CATEGORY}, property +If you would like to have a special category for a single entry or +a (sub)tree, give the entry a @samp{CATEGORY} property with the special +category you want to apply as the value. + +@vindex org-agenda-category-icon-alist +The display in the agenda buffer looks best if the category is not +longer than 10 characters. You can set up icons for category by +customizing the @code{org-agenda-category-icon-alist} variable. + +@node Time-of-day specifications +@subsection Time-of-day specifications + +@cindex time-of-day specification + +Org mode checks each agenda item for a time-of-day specification. The +time can be part of the timestamp that triggered inclusion into the +agenda, for example + +@example +<2005-05-10 Tue 19:00> +@end example + + +@noindent +Time ranges can be specified with two timestamps: + +@example +<2005-05-10 Tue 20:30>--<2005-05-10 Tue 22:15> +@end example + + +@vindex org-agenda-search-headline-for-time +In the headline of the entry itself, a time(range)---like @samp{12:45} or +a @samp{8:30-1pm}---may also appear as plain text@footnote{You can, however, disable this by setting +@code{org-agenda-search-headline-for-time} variable to a @code{nil} value.}. + +If the agenda integrates the Emacs diary (see @ref{Weekly/daily agenda}), +time specifications in diary entries are recognized as well. + +For agenda display, Org mode extracts the time and displays it in +a standard 24 hour format as part of the prefix. The example times in +the previous paragraphs would end up in the agenda like this: + +@example + 8:30-13:00 Arthur Dent lies in front of the bulldozer +12:45...... Ford Prefect arrives and takes Arthur to the pub +19:00...... The Vogon reads his poem +20:30-22:15 Marvin escorts the Hitchhikers to the bridge +@end example + +@cindex time grid +If the agenda is in single-day mode, or for the display of today, the +timed entries are embedded in a time grid, like + +@example + 8:00...... ------------------ + 8:30-13:00 Arthur Dent lies in front of the bulldozer +10:00...... ------------------ +12:00...... ------------------ +12:45...... Ford Prefect arrives and takes Arthur to the pub +14:00...... ------------------ +16:00...... ------------------ +18:00...... ------------------ +19:00...... The Vogon reads his poem +20:00...... ------------------ +20:30-22:15 Marvin escorts the Hitchhikers to the bridge +@end example + +@vindex org-agenda-use-time-grid +@vindex org-agenda-time-grid +The time grid can be turned on and off with the variable +@code{org-agenda-use-time-grid}, and can be configured with +@code{org-agenda-time-grid}. + +@node Sorting of agenda items +@subsection Sorting of agenda items + +@cindex sorting, of agenda items +@cindex priorities, of agenda items + +Before being inserted into a view, the items are sorted. How this is +done depends on the type of view. + +@itemize +@item +@vindex org-agenda-files +For the daily/weekly agenda, the items for each day are sorted. The +default order is to first collect all items containing an explicit +time-of-day specification. These entries are shown at the beginning +of the list, as a @emph{schedule} for the day. After that, items remain +grouped in categories, in the sequence given by @code{org-agenda-files}. +Within each category, items are sorted by priority (see +@ref{Priorities}), which is composed of the base priority (2000 for +priority @samp{A}, 1000 for @samp{B}, and 0 for @samp{C}), plus additional +increments for overdue scheduled or deadline items. + +@item +For the TODO list, items remain in the order of categories, but +within each category, sorting takes place according to priority (see +@ref{Priorities}). The priority used for sorting derives from the +priority cookie, with additions depending on how close an item is to +its due or scheduled date. + +@item +For tags matches, items are not sorted at all, but just appear in +the sequence in which they are found in the agenda files. +@end itemize + +@vindex org-agenda-sorting-strategy +Sorting can be customized using the variable +@code{org-agenda-sorting-strategy}, and may also include criteria based on +the estimated effort of an entry (see @ref{Effort Estimates}). + +@node Filtering/limiting agenda items +@subsection Filtering/limiting agenda items + +@vindex org-agenda-category-filter-preset +@vindex org-agenda-tag-filter-preset +@vindex org-agenda-effort-filter-preset +@vindex org-agenda-regexp-filter-preset +Agenda built-in or custom commands are statically defined. Agenda +filters and limits allow to flexibly narrow down the list of agenda +entries. + +@emph{Filters} only change the visibility of items, are very fast and are +mostly used interactively@footnote{Custom agenda commands can preset a filter by binding one of +the variables @code{org-agenda-tag-filter-preset}, +@code{org-agenda-category-filter-preset}, @code{org-agenda-effort-filter-preset} +or @code{org-agenda-regexp-filter-preset} as an option. This filter is +then applied to the view and persists as a basic filter through +refreshes and more secondary filtering. The filter is a global +property of the entire agenda view---in a block agenda, you should +only set this in the global options section, not in the section of an +individual block.}. You can switch quickly between +different filters without having to recreate the agenda. @emph{Limits} on +the other hand take effect before the agenda buffer is populated, so +they are mostly useful when defined as local variables within custom +agenda commands. + +@anchor{Filtering in the agenda} +@subsubheading Filtering in the agenda + +@cindex agenda filtering +@cindex filtering entries, in agenda +@cindex tag filtering, in agenda +@cindex category filtering, in agenda +@cindex top headline filtering, in agenda +@cindex effort filtering, in agenda +@cindex query editing, in agenda + +The general filtering command is @code{org-agenda-filter}, bound to +@kbd{/}. Before we introduce it, we describe commands for +individual filter types. All filtering commands handle prefix +arguments in the same way: A single @kbd{C-u} prefix negates the +filter, so it removes lines selected by the filter. A double prefix +adds the new filter condition to the one(s) already in place, so +filter elements are accumulated. + +@table @asis +@item @kbd{\} (@code{org-agenda-filter-by-tag}) +@findex org-agenda-filter-by-tag +Filter the agenda view with respect to a tag. You are prompted for +a tag selection letter; @kbd{@key{SPC}} means any tag at all. +Pressing @kbd{@key{TAB}} at that prompt offers completion to select a +tag, including any tags that do not have a selection character. The +command then hides all entries that do not contain or inherit this +tag. Pressing @kbd{+} or @kbd{-} at the prompt switches +between filtering for and against the next tag. To clear the +filter, press @kbd{\} twice (once to call the command again, +and once at the prompt). + +@item @kbd{<} (@code{org-agenda-filter-by-category}) +@findex org-agenda-filter-by-category +Filter by category of the line at point, and show only entries with +this category. When called with a prefix argument, hide all entries +with the category at point. To clear the filter, call this command +again by pressing @kbd{<}. + +@item @kbd{=} (@code{org-agenda-filter-by-regexp}) +@findex org-agenda-filter-by-regexp +Filter the agenda view by a regular expression: only show agenda +entries matching the regular expression the user entered. To clear +the filter, call the command again by pressing @kbd{=}. + +@item @kbd{_} (@code{org-agenda-filter-by-effort}) +@findex org-agenda-filter-by-effort +Filter the agenda view with respect to effort estimates, so select +tasks that take the right amount of time. You first need to set up +a list of efforts globally, for example + +@lisp +(setq org-global-properties + '(("Effort_ALL". "0 0:10 0:30 1:00 2:00 3:00 4:00"))) +@end lisp + +@vindex org-sort-agenda-noeffort-is-high +You can then filter for an effort by first typing an operator, one +of @kbd{<}, @kbd{>} and @kbd{=}, and then the +one-digit index of an effort estimate in your array of allowed +values, where @kbd{0} means the 10th value. The filter then +restricts to entries with effort smaller-or-equal, equal, or +larger-or-equal than the selected value. For application of the +operator, entries without a defined effort are treated according to +the value of @code{org-sort-agenda-noeffort-is-high}. To clear the +filter, press @kbd{_} twice (once to call the command again, +and once at the first prompt). + +@item @kbd{^} (@code{org-agenda-filter-by-top-headline}) +@findex org-agenda-filter-by-top-headline +Filter the current agenda view and only display items that fall +under the same top-level headline as the current entry. To clear +the filter, call this command again by pressing @kbd{^}. + +@item @kbd{/} (@code{org-agenda-filter}) +@findex org-agenda-filter +This is the unified interface to four of the five filter methods +described above. At the prompt, specify different filter elements +in a single string, with full completion support. For example, + +@example ++work-John+<0:10-/plot/ +@end example + + +selects entries with category @samp{work} and effort estimates below 10 +minutes, and deselects entries with tag @samp{John} or matching the +regexp @samp{plot} (see @ref{Regular Expressions}). You can leave @samp{+} out if +that does not lead to ambiguities. The sequence of elements is +arbitrary. The filter syntax assumes that there is no overlap +between categories and tags. Otherwise, tags take priority. If you +reply to the prompt with the empty string, all filtering is removed. +If a filter is specified, it replaces all current filters. But if +you call the command with a double prefix argument, or if you add an +additional @samp{+} (e.g., @samp{++work}) to the front of the string, the new +filter elements are added to the active ones. A single prefix +argument applies the entire filter in a negative sense. + +@item @kbd{|} (@code{org-agenda-filter-remove-all}) +Remove all filters in the current agenda view. +@end table + +@anchor{Computed tag filtering} +@subsubheading Computed tag filtering + +@vindex org-agenda-auto-exclude-function +If the variable @code{org-agenda-auto-exclude-function} is set to +a user-defined function, that function can select tags that should be +used as a tag filter when requested. The function will be called with +lower-case versions of all tags represented in the current view. The +function should return @samp{"-tag"} if the filter should remove +entries with that tag, @samp{"+tag"} if only entries with this tag should +be kept, or @samp{nil} if that tag is irrelevant. For example, let's say +you use a @samp{Net} tag to identify tasks which need network access, an +@samp{Errand} tag for errands in town, and a @samp{Call} tag for making phone +calls. You could auto-exclude these tags based on the availability of +the Internet, and outside of business hours, with something like this: + +@lisp +(defun my-auto-exclude-fn (tag) + (when (cond ((string= tag "net") + (/= 0 (call-process "/sbin/ping" nil nil nil + "-c1" "-q" "-t1" "mail.gnu.org"))) + ((member tag '("errand" "call")) + (let ((hr (nth 2 (decode-time)))) + (or (< hr 8) (> hr 21))))) + (concat "-" tag))) + +(setq org-agenda-auto-exclude-function #'my-auto-exclude-fn) +@end lisp + +You can apply this self-adapting filter by using a triple prefix +argument to @code{org-agenda-filter}, i.e.@tie{}press @kbd{C-u C-u C-u /}, +or by pressing @kbd{@key{RET}} in @code{org-agenda-filter-by-tag}. + +@anchor{Setting limits for the agenda} +@subsubheading Setting limits for the agenda + +@cindex limits, in agenda + +Here is a list of options that you can set, either globally, or +locally in your custom agenda views (see @ref{Custom Agenda Views}). + +@table @asis +@item @code{org-agenda-max-entries} +@vindex org-agenda-max-entries +Limit the number of entries. + +@item @code{org-agenda-max-effort} +@vindex org-agenda-max-effort +Limit the duration of accumulated efforts (as minutes). + +@item @code{org-agenda-max-todos} +@vindex org-agenda-max-todos +Limit the number of entries with TODO keywords. + +@item @code{org-agenda-max-tags} +@vindex org-agenda-max-tags +Limit the number of tagged entries. +@end table + +When set to a positive integer, each option excludes entries from +other categories: for example, @samp{(setq org-agenda-max-effort 100)} +limits the agenda to 100 minutes of effort and exclude any entry that +has no effort property. If you want to include entries with no effort +property, use a negative value for @code{org-agenda-max-effort}. One +useful setup is to use @code{org-agenda-max-entries} locally in a custom +command. For example, this custom command displays the next five +entries with a @samp{NEXT} TODO keyword. + +@lisp +(setq org-agenda-custom-commands + '(("n" todo "NEXT" + ((org-agenda-max-entries 5))))) +@end lisp + +Once you mark one of these five entry as DONE, rebuilding the agenda +will again the next five entries again, including the first entry that +was excluded so far. + +You can also dynamically set temporary limits, which are lost when +rebuilding the agenda: + +@table @asis +@item @kbd{~} (@code{org-agenda-limit-interactively}) +@findex org-agenda-limit-interactively +This prompts for the type of limit to apply and its value. +@end table + +@node Agenda Commands +@section Commands in the Agenda Buffer + +@cindex commands, in agenda buffer + +Entries in the agenda buffer are linked back to the Org file or diary +file where they originate. You are not allowed to edit the agenda +buffer itself, but commands are provided to show and jump to the +original entry location, and to edit the Org files ``remotely'' from the +agenda buffer. In this way, all information is stored only once, +removing the risk that your agenda and note files may diverge. + +Some commands can be executed with mouse clicks on agenda lines. For +the other commands, point needs to be in the desired line. + +@anchor{Motion (1)} +@subheading Motion + +@cindex motion commands in agenda + +@table @asis +@item @kbd{n} (@code{org-agenda-next-line}) +@kindex n +@findex org-agenda-next-line +Next line (same as @kbd{@key{DOWN}} and @kbd{C-n}). + +@item @kbd{p} (@code{org-agenda-previous-line}) +@kindex p +@findex org-agenda-previous-line +Previous line (same as @kbd{@key{UP}} and @kbd{C-p}). +@end table + +@anchor{View/Go to Org file} +@subheading View/Go to Org file + +@cindex view file commands in agenda + +@table @asis +@item @kbd{@key{SPC}} or @kbd{mouse-3} (@code{org-agenda-show-and-scroll-up}) +@kindex SPC +@kindex mouse-3 +@findex org-agenda-show-and-scroll-up +Display the original location of the item in another window. +With a prefix argument, make sure that drawers stay folded. + +@item @kbd{L} (@code{org-agenda-recenter}) +@findex org-agenda-recenter +Display original location and recenter that window. + +@item @kbd{@key{TAB}} or @kbd{mouse-2} (@code{org-agenda-goto}) +@kindex TAB +@kindex mouse-2 +@findex org-agenda-goto +Go to the original location of the item in another window. + +@item @kbd{@key{RET}} (@code{org-agenda-switch-to}) +@kindex RET +@findex org-agenda-switch-to +Go to the original location of the item and delete other windows. + +@item @kbd{F} (@code{org-agenda-follow-mode}) +@kindex F +@findex org-agenda-follow-mode +@vindex org-agenda-start-with-follow-mode +Toggle Follow mode. In Follow mode, as you move point through the +agenda buffer, the other window always shows the corresponding +location in the Org file. The initial setting for this mode in new +agenda buffers can be set with the variable +@code{org-agenda-start-with-follow-mode}. + +@item @kbd{C-c C-x b} (@code{org-agenda-tree-to-indirect-buffer}) +@kindex C-c C-x b +@findex org-agenda-tree-to-indirect-buffer +Display the entire subtree of the current item in an indirect +buffer. With a numeric prefix argument N, go up to level N and then +take that tree. If N is negative, go up that many levels. With +a @kbd{C-u} prefix, do not remove the previously used indirect +buffer. + +@item @kbd{C-c C-o} (@code{org-agenda-open-link}) +@kindex C-c C-o +@findex org-agenda-open-link +Follow a link in the entry. This offers a selection of any links in +the text belonging to the referenced Org node. If there is only one +link, follow it without a selection prompt. +@end table + +@anchor{Change display} +@subheading Change display + +@cindex change agenda display +@cindex display changing, in agenda + +@table @asis +@item @kbd{A} +@kindex A +Interactively select another agenda view and append it to the +current view. + +@item @kbd{o} +@kindex o +Delete other windows. + +@item @kbd{v d} or short @kbd{d} (@code{org-agenda-day-view}) +@kindex v d +@kindex d +@findex org-agenda-day-view +Switch to day view. When switching to day view, this setting +becomes the default for subsequent agenda refreshes. A numeric +prefix argument may be used to jump directly to a specific day of +the year. For example, @kbd{32 d} jumps to February 1st. When +setting day view, a year may be encoded in the prefix argument as +well. For example, @kbd{200712 d} jumps to January 12, 2007. +If such a year specification has only one or two digits, it is +expanded into one of the 30 next years or the last 69 years. + +@item @kbd{v w} or short @kbd{w} (@code{org-agenda-week-view}) +@kindex v w +@kindex w +@findex org-agenda-week-view +Switch to week view. When switching week view, this setting becomes +the default for subsequent agenda refreshes. A numeric prefix +argument may be used to jump directly to a specific day of the ISO +week. For example @kbd{9 w} to ISO week number 9. When +setting week view, a year may be encoded in the prefix argument as +well. For example, @kbd{200712 w} jumps to week 12 in 2007. +If such a year specification has only one or two digits, it is +expanded into one of the 30 next years or the last 69 years. + +@item @kbd{v m} (@code{org-agenda-month-view}) +@kindex v m +@findex org-agenda-month-view +Switch to month view. Because month views are slow to create, they +do not become the default for subsequent agenda refreshes. +A numeric prefix argument may be used to jump directly to a specific +day of the month. When setting month view, a year may be encoded in +the prefix argument as well. For example, @kbd{200712 m} jumps +to December, 2007. If such a year specification has only one or two +digits, it is expanded into one of the 30 next years or the last 69 +years. + +@item @kbd{v y} (@code{org-agenda-year-view}) +@kindex v y +@findex org-agenda-year-view +Switch to year view. Because year views are slow to create, they do +not become the default for subsequent agenda refreshes. A numeric +prefix argument may be used to jump directly to a specific day of +the year. + +@item @kbd{v @key{SPC}} (@code{org-agenda-reset-view}) +@kindex v SPC +@findex org-agenda-reset-view +@vindex org-agenda-span +Reset the current view to @code{org-agenda-span}. + +@item @kbd{f} (@code{org-agenda-later}) +@kindex f +@findex org-agenda-later +Go forward in time to display the span following the current one. +For example, if the display covers a week, switch to the following +week. With a prefix argument, repeat that many times. + +@item @kbd{b} (@code{org-agenda-earlier}) +@kindex b +@findex org-agenda-earlier +Go backward in time to display earlier dates. + +@item @kbd{.} (@code{org-agenda-goto-today}) +@kindex . +@findex org-agenda-goto-today +Go to today. + +@item @kbd{j} (@code{org-agenda-goto-date}) +@kindex j +@findex org-agenda-goto-date +Prompt for a date and go there. + +@item @kbd{J} (@code{org-agenda-clock-goto}) +@kindex J +@findex org-agenda-clock-goto +Go to the currently clocked-in task @emph{in the agenda buffer}. + +@item @kbd{D} (@code{org-agenda-toggle-diary}) +@kindex D +@findex org-agenda-toggle-diary +Toggle the inclusion of diary entries. See @ref{Weekly/daily agenda}. + +@item @kbd{v l} or @kbd{v L} or short @kbd{l} (@code{org-agenda-log-mode}) +@kindex v l +@kindex l +@kindex v L +@findex org-agenda-log-mode +@vindex org-log-done +@vindex org-agenda-log-mode-items +Toggle Logbook mode. In Logbook mode, entries that were marked as +done while logging was on (see the variable @code{org-log-done}) are +shown in the agenda, as are entries that have been clocked on that +day. You can configure the entry types that should be included in +log mode using the variable @code{org-agenda-log-mode-items}. When +called with a @kbd{C-u} prefix argument, show all possible +logbook entries, including state changes. When called with two +prefix arguments @kbd{C-u C-u}, show only logging information, +nothing else. @kbd{v L} is equivalent to @kbd{C-u v l}. + +@item @kbd{v [} or short @kbd{[} (@code{org-agenda-manipulate-query-add}) +@kindex v [ +@kindex [ +@findex org-agenda-manipulate-query-add +Include inactive timestamps into the current view. Only for +weekly/daily agenda. + +@item @kbd{v a} (@code{org-agenda-archives-mode}) +@kindex v a +@findex org-agenda-archives-mode +Toggle Archives mode. In Archives mode, trees that are archived +(see @ref{Internal archiving}) are also scanned when producing the +agenda. To exit archives mode, press @kbd{v a} again. + +@item @kbd{v A} +@kindex v A +Toggle Archives mode. Include all archive files as well. + +@item @kbd{v R} or short @kbd{R} (@code{org-agenda-clockreport-mode}) +@kindex v R +@kindex R +@findex org-agenda-clockreport-mode +@vindex org-agenda-start-with-clockreport-mode +@vindex org-clock-report-include-clocking-task +Toggle Clockreport mode. In Clockreport mode, the daily/weekly +agenda always shows a table with the clocked times for the time span +and file scope covered by the current agenda view. The initial +setting for this mode in new agenda buffers can be set with the +variable @code{org-agenda-start-with-clockreport-mode}. By using +a prefix argument when toggling this mode (i.e., @kbd{C-u R}), +the clock table does not show contributions from entries that are +hidden by agenda filtering@footnote{Only tags filtering is respected here, effort filtering is +ignored.}. See also the variable +@code{org-clock-report-include-clocking-task}. + +@item @kbd{v c} +@kindex v c +@vindex org-agenda-clock-consistency-checks +Show overlapping clock entries, clocking gaps, and other clocking +problems in the current agenda range. You can then visit clocking +lines and fix them manually. See the variable +@code{org-agenda-clock-consistency-checks} for information on how to +customize the definition of what constituted a clocking problem. To +return to normal agenda display, press @kbd{l} to exit Logbook +mode. + +@item @kbd{v E} or short @kbd{E} (@code{org-agenda-entry-text-mode}) +@kindex v E +@kindex E +@findex org-agenda-entry-text-mode +@vindex org-agenda-start-with-entry-text-mode +@vindex org-agenda-entry-text-maxlines +Toggle entry text mode. In entry text mode, a number of lines from +the Org outline node referenced by an agenda line are displayed +below the line. The maximum number of lines is given by the +variable @code{org-agenda-entry-text-maxlines}. Calling this command +with a numeric prefix argument temporarily modifies that number to +the prefix value. + +@item @kbd{G} (@code{org-agenda-toggle-time-grid}) +@kindex G +@vindex org-agenda-use-time-grid +@vindex org-agenda-time-grid +Toggle the time grid on and off. See also the variables +@code{org-agenda-use-time-grid} and @code{org-agenda-time-grid}. + +@item @kbd{r} (@code{org-agenda-redo}) +@itemx @kbd{g} +@kindex r +@kindex g +@findex org-agenda-redo +Recreate the agenda buffer, for example to reflect the changes after +modification of the timestamps of items with @kbd{S-@key{LEFT}} and +@kbd{S-@key{RIGHT}}. When the buffer is the global TODO list, +a prefix argument is interpreted to create a selective list for +a specific TODO keyword. + +@item @kbd{C-x C-s} or short @kbd{s} (@code{org-save-all-org-buffers}) +@kindex C-x C-s +@findex org-save-all-org-buffers +@kindex s +Save all Org buffers in the current Emacs session, and also the +locations of IDs. + +@item @kbd{C-c C-x C-c} (@code{org-agenda-columns}) +@kindex C-c C-x C-c +@findex org-agenda-columns +@vindex org-columns-default-format +Invoke column view (see @ref{Column View}) in the agenda buffer. The +column view format is taken from the entry at point, or, if there is +no entry at point, from the first entry in the agenda view. So +whatever the format for that entry would be in the original buffer +(taken from a property, from a @samp{COLUMNS} keyword, or from the +default variable @code{org-columns-default-format}) is used in the +agenda. + +@item @kbd{C-c C-x >} (@code{org-agenda-remove-restriction-lock}) +@kindex C-c C-x > +@findex org-agenda-remove-restriction-lock +Remove the restriction lock on the agenda, if it is currently +restricted to a file or subtree (see @ref{Agenda Files}). + +@item @kbd{M-@key{UP}} (@code{org-agenda-drag-line-backward}) +@kindex M-UP +@findex org-agenda-drag-line-backward +Drag the line at point backward one line. With a numeric prefix +argument, drag backward by that many lines. + +Moving agenda lines does not persist after an agenda refresh and +does not modify the contributing Org files. + +@item @kbd{M-@key{DOWN}} (@code{org-agenda-drag-line-forward}) +@kindex M-DOWN +@findex org-agenda-drag-line-forward +Drag the line at point forward one line. With a numeric prefix +argument, drag forward by that many lines. +@end table + +@anchor{Remote editing} +@subheading Remote editing + +@cindex remote editing, from agenda + +@table @asis +@item @kbd{0--9} +Digit argument. + +@item @kbd{C-_} (@code{org-agenda-undo}) +@kindex C-_ +@findex org-agenda-undo +@cindex undoing remote-editing events +@cindex remote editing, undo +Undo a change due to a remote editing command. The change is undone +both in the agenda buffer and in the remote buffer. + +@item @kbd{t} (@code{org-agenda-todo}) +@kindex t +@findex org-agenda-todo +Change the TODO state of the item, both in the agenda and in the +original Org file. A prefix arg is passed through to the @code{org-todo} +command, so for example a @kbd{C-u} prefix are will trigger +taking a note to document the state change. + +@item @kbd{C-S-@key{RIGHT}} (@code{org-agenda-todo-nextset}) +@kindex C-S-RIGHT +@findex org-agenda-todo-nextset +Switch to the next set of TODO keywords. + +@item @kbd{C-S-@key{LEFT}}, @code{org-agenda-todo-previousset} +@kindex C-S-LEFT +Switch to the previous set of TODO keywords. + +@item @kbd{C-k} (@code{org-agenda-kill}) +@kindex C-k +@findex org-agenda-kill +@vindex org-agenda-confirm-kill +Delete the current agenda item along with the entire subtree +belonging to it in the original Org file. If the text to be deleted +remotely is longer than one line, the kill needs to be confirmed by +the user. See variable @code{org-agenda-confirm-kill}. + +@item @kbd{C-c C-w} (@code{org-agenda-refile}) +@kindex C-c C-w +@findex org-agenda-refile +Refile the entry at point. + +@item @kbd{C-c C-x C-a} or short @kbd{a} (@code{org-agenda-archive-default-with-confirmation}) +@kindex C-c C-x C-a +@kindex a +@findex org-agenda-archive-default-with-confirmation +@vindex org-archive-default-command +Archive the subtree corresponding to the entry at point using the +default archiving command set in @code{org-archive-default-command}. +When using the @kbd{a} key, confirmation is required. + +@item @kbd{C-c C-x a} (@code{org-agenda-toggle-archive-tag}) +@kindex C-c C-x a +@findex org-agenda-toggle-archive-tag +Toggle the archive tag (see @ref{Internal archiving}) for the current +headline. + +@item @kbd{C-c C-x A} (@code{org-agenda-archive-to-archive-sibling}) +@kindex C-c C-x A +@findex org-agenda-archive-to-archive-sibling +Move the subtree corresponding to the current entry to its @emph{archive +sibling}. + +@item @kbd{C-c C-x C-s} or short @kbd{$} (@code{org-agenda-archive}) +@kindex C-c C-x C-s +@kindex $ +@findex org-agenda-archive +Archive the subtree corresponding to the current headline. This +means the entry is moved to the configured archive location, most +likely a different file. + +@item @kbd{T} (@code{org-agenda-show-tags}) +@kindex T +@findex org-agenda-show-tags +@vindex org-agenda-show-inherited-tags +Show all tags associated with the current item. This is useful if +you have turned off @code{org-agenda-show-inherited-tags}, but still want +to see all tags of a headline occasionally. + +@item @kbd{:} (@code{org-agenda-set-tags}) +@kindex : +@findex org-agenda-set-tags +Set tags for the current headline. If there is an active region in +the agenda, change a tag for all headings in the region. + +@item @kbd{,} (@code{org-agenda-priority}) +@kindex , +@findex org-agenda-priority +Set the priority for the current item. Org mode prompts for the +priority character. If you reply with @kbd{@key{SPC}}, the priority +cookie is removed from the entry. + +@item @kbd{+} or @kbd{S-@key{UP}} (@code{org-agenda-priority-up}) +@kindex + +@kindex S-UP +@findex org-agenda-priority-up +Increase the priority of the current item. The priority is changed +in the original buffer, but the agenda is not resorted. Use the +@kbd{r} key for this. + +@item @kbd{-} or @kbd{S-@key{DOWN}} (@code{org-agenda-priority-down}) +@kindex - +@kindex S-DOWN +@findex org-agenda-priority-down +Decrease the priority of the current item. + +@item @kbd{C-c C-x e} or short @kbd{e} (@code{org-agenda-set-effort}) +@kindex e +@kindex C-c C-x e +@findex org-agenda-set-effort +Set the effort property for the current item. + +@item @kbd{C-c C-z} or short @kbd{z} (@code{org-agenda-add-note}) +@kindex z +@kindex C-c C-z +@findex org-agenda-add-note +@vindex org-log-into-drawer +Add a note to the entry. This note is recorded, and then filed to +the same location where state change notes are put. Depending on +@code{org-log-into-drawer}, this may be inside a drawer. + +@item @kbd{C-c C-a} (@code{org-attach}) +@kindex C-c C-a +@findex org-attach +Dispatcher for all command related to attachments. + +@item @kbd{C-c C-s} (@code{org-agenda-schedule}) +@kindex C-c C-s +@findex org-agenda-schedule +Schedule this item. With a prefix argument, remove the +scheduling timestamp + +@item @kbd{C-c C-d} (@code{org-agenda-deadline}) +@kindex C-c C-d +@findex org-agenda-deadline +Set a deadline for this item. With a prefix argument, remove the +deadline. + +@item @kbd{S-@key{RIGHT}} (@code{org-agenda-do-date-later}) +@kindex S-RIGHT +@findex org-agenda-do-date-later +Change the timestamp associated with the current line by one day +into the future. If the date is in the past, the first call to this +command moves it to today. With a numeric prefix argument, change +it by that many days. For example, @kbd{3 6 5 S-@key{RIGHT}} changes +it by a year. With a @kbd{C-u} prefix, change the time by one +hour. If you immediately repeat the command, it will continue to +change hours even without the prefix argument. With a double +@kbd{C-u C-u} prefix, do the same for changing minutes. The +stamp is changed in the original Org file, but the change is not +directly reflected in the agenda buffer. Use @kbd{r} or +@kbd{g} to update the buffer. + +@item @kbd{S-@key{LEFT}} (@code{org-agenda-do-date-earlier}) +@kindex S-LEFT +@findex org-agenda-do-date-earlier +Change the timestamp associated with the current line by one day +into the past. + +@item @kbd{>} (@code{org-agenda-date-prompt}) +@kindex > +@findex org-agenda-date-prompt +Change the timestamp associated with the current line. The key +@kbd{>} has been chosen, because it is the same as +@kbd{S-.} on my keyboard. + +@item @kbd{I} (@code{org-agenda-clock-in}) +@kindex I +@findex org-agenda-clock-in +Start the clock on the current item. If a clock is running already, +it is stopped first. + +@item @kbd{O} (@code{org-agenda-clock-out}) +@kindex O +@findex org-agenda-clock-out +Stop the previously started clock. + +@item @kbd{X} (@code{org-agenda-clock-cancel}) +@kindex X +@findex org-agenda-clock-cancel +Cancel the currently running clock. + +@item @kbd{J} (@code{org-agenda-clock-goto}) +@kindex J +@findex org-agenda-clock-goto +Jump to the running clock in another window. + +@item @kbd{k} (@code{org-agenda-capture}) +@kindex k +@findex org-agenda-capture +@cindex capturing, from agenda +@vindex org-capture-use-agenda-date +Like @code{org-capture}, but use the date at point as the default date +for the capture template. See @code{org-capture-use-agenda-date} to make +this the default behavior of @code{org-capture}. +@end table + +@anchor{Bulk remote editing selected entries} +@subheading Bulk remote editing selected entries + +@cindex remote editing, bulk, from agenda +@vindex org-agenda-bulk-custom-functions + +@table @asis +@item @kbd{m} (@code{org-agenda-bulk-mark}) +@kindex m +@findex org-agenda-bulk-mark + +Mark the entry at point for bulk action. If there is an active +region in the agenda, mark the entries in the region. With numeric +prefix argument, mark that many successive entries. + +@item @kbd{*} (@code{org-agenda-bulk-mark-all}) +@kindex * +@findex org-agenda-bulk-mark-all + +Mark all visible agenda entries for bulk action. + +@item @kbd{u} (@code{org-agenda-bulk-unmark}) +@kindex u +@findex org-agenda-bulk-unmark + +Unmark entry for bulk action. + +@item @kbd{U} (@code{org-agenda-bulk-remove-all-marks}) +@kindex U +@findex org-agenda-bulk-remove-all-marks + +Unmark all marked entries for bulk action. + +@item @kbd{M-m} (@code{org-agenda-bulk-toggle}) +@kindex M-m +@findex org-agenda-bulk-toggle + +Toggle mark of the entry at point for bulk action. + +@item @kbd{M-*} (@code{org-agenda-bulk-toggle-all}) +@kindex M-* +@findex org-agenda-bulk-toggle-all + +Toggle mark of every entry for bulk action. + +@item @kbd{%} (@code{org-agenda-bulk-mark-regexp}) +@kindex % +@findex org-agenda-bulk-mark-regexp + +Mark entries matching a regular expression for bulk action. + +@item @kbd{B} (@code{org-agenda-bulk-action}) +@kindex B +@findex org-agenda-bulk-action +@vindex org-agenda-bulk-persistent-marks + +Bulk action: act on all marked entries in the agenda. This prompts +for another key to select the action to be applied. The prefix +argument to @kbd{B} is passed through to the @kbd{s} and +@kbd{d} commands, to bulk-remove these special timestamps. By +default, marks are removed after the bulk. If you want them to +persist, set @code{org-agenda-bulk-persistent-marks} to @code{t} or hit +@kbd{p} at the prompt. + +@table @asis +@item @kbd{p} +Toggle persistent marks. + +@item @kbd{$} +Archive all selected entries. + +@item @kbd{A} +Archive entries by moving them to their respective archive +siblings. + +@item @kbd{t} +Change TODO state. This prompts for a single TODO keyword and +changes the state of all selected entries, bypassing blocking and +suppressing logging notes---but not timestamps. + +@item @kbd{+} +Add a tag to all selected entries. + +@item @kbd{-} +Remove a tag from all selected entries. + +@item @kbd{s} +Schedule all items to a new date. To shift existing schedule +dates by a fixed number of days, use something starting with +double plus at the prompt, for example @samp{++8d} or @samp{++2w}. + +@item @kbd{d} +Set deadline to a specific date. + +@item @kbd{r} +Prompt for a single refile target and move all entries. The +entries are no longer in the agenda; refresh (@kbd{g}) to +bring them back. + +@item @kbd{S} +Reschedule randomly into the coming N days. N is prompted for. +With a prefix argument (@kbd{C-u B S}), scatter only across +weekdays. + +@item @kbd{f} +@vindex org-agenda-bulk-custom-functions +Apply a function@footnote{You can also create persistent custom functions through +@code{org-agenda-bulk-custom-functions}.} to marked entries. For example, the +function below sets the @samp{CATEGORY} property of the entries to +@samp{web}. + +@lisp +(defun set-category () + (interactive "P") + (let ((marker (or (org-get-at-bol 'org-hd-marker) + (org-agenda-error)))) + (org-with-point-at marker + (org-back-to-heading t) + (org-set-property "CATEGORY" "web")))) +@end lisp +@end table +@end table + +@anchor{Calendar commands} +@subheading Calendar commands + +@cindex calendar commands, from agenda + +@table @asis +@item @kbd{c} (@code{org-agenda-goto-calendar}) +@kindex c +@findex org-agenda-goto-calendar +Open the Emacs calendar and go to the date at point in the agenda. + +@item @kbd{c} (@code{org-calendar-goto-agenda}) +@kindex c +@findex org-calendar-goto-agenda +When in the calendar, compute and show the Org agenda for the date +at point. + +@item @kbd{i} (@code{org-agenda-diary-entry}) +@kindex i +@findex org-agenda-diary-entry + +@cindex diary entries, creating from agenda +Insert a new entry into the diary, using the date at point and (for +block entries) the date at the mark. This adds to the Emacs diary +file@footnote{This file is parsed for the agenda when +@code{org-agenda-include-diary} is set.}, in a way similar to the @kbd{i} command in the +calendar. The diary file pops up in another window, where you can +add the entry. + +@vindex org-agenda-diary-file +If you configure @code{org-agenda-diary-file} to point to an Org file, +Org creates entries in that file instead. Most entries are stored +in a date-based outline tree that will later make it easy to archive +appointments from previous months/years. The tree is built under an +entry with a @samp{DATE_TREE} property, or else with years as top-level +entries. Emacs prompts you for the entry text---if you specify it, +the entry is created in @code{org-agenda-diary-file} without further +interaction. If you directly press @kbd{@key{RET}} at the prompt +without typing text, the target file is shown in another window for +you to finish the entry there. See also the @kbd{k r} command. + +@item @kbd{M} (@code{org-agenda-phases-of-moon}) +@kindex M +@findex org-agenda-phases-of-moon +Show the phases of the moon for the three months around current +date. + +@item @kbd{S} (@code{org-agenda-sunrise-sunset}) +@kindex S +@findex org-agenda-sunrise-sunset +Show sunrise and sunset times. The geographical location must be +set with calendar variables, see the documentation for the Emacs +calendar. + +@item @kbd{C} (@code{org-agenda-convert-date}) +@kindex C +@findex org-agenda-convert-date +Convert the date at point into many other cultural and historic +calendars. + +@item @kbd{H} (@code{org-agenda-holidays}) +@kindex H +@findex org-agenda-holidays +Show holidays for three months around point date. +@end table + +@anchor{Quit and exit} +@subheading Quit and exit + +@table @asis +@item @kbd{q} (@code{org-agenda-quit}) +@kindex q +@findex org-agenda-quit + +Quit agenda, remove the agenda buffer. + +@item @kbd{x} (@code{org-agenda-exit}) +@kindex x +@findex org-agenda-exit + +@cindex agenda files, removing buffers +Exit agenda, remove the agenda buffer and all buffers loaded by +Emacs for the compilation of the agenda. Buffers created by the +user to visit Org files are not removed. +@end table + +@node Custom Agenda Views +@section Custom Agenda Views + +@cindex custom agenda views +@cindex agenda views, custom + +Custom agenda commands serve two purposes: to store and quickly access +frequently used TODO and tags searches, and to create special +composite agenda buffers. Custom agenda commands are accessible +through the dispatcher (see @ref{Agenda Dispatcher}), just like the +default commands. + +@menu +* Storing searches:: Type once, use often. +* Block agenda:: All the stuff you need in a single buffer. +* Setting options:: Changing the rules. +@end menu + +@node Storing searches +@subsection Storing searches + +The first application of custom searches is the definition of keyboard +shortcuts for frequently used searches, either creating an agenda +buffer, or a sparse tree (the latter covering of course only the +current buffer). + +@kindex C @r{(Agenda dispatcher)} +@vindex org-agenda-custom-commands +@cindex agenda views, main example +@cindex agenda, as an agenda views +@cindex agenda*, as an agenda views +@cindex tags, as an agenda view +@cindex todo, as an agenda view +@cindex tags-todo +@cindex todo-tree +@cindex occur-tree +@cindex tags-tree +Custom commands are configured in the variable +@code{org-agenda-custom-commands}. You can customize this variable, for +example by pressing @kbd{C} from the agenda dispatcher (see @ref{Agenda Dispatcher}). You can also directly set it with Emacs Lisp in +the Emacs init file. The following example contains all valid agenda +views: + +@lisp +(setq org-agenda-custom-commands + '(("x" agenda) + ("y" agenda*) + ("w" todo "WAITING") + ("W" todo-tree "WAITING") + ("u" tags "+boss-urgent") + ("v" tags-todo "+boss-urgent") + ("U" tags-tree "+boss-urgent") + ("f" occur-tree "\\") + ("h" . "HOME+Name tags searches") ;description for "h" prefix + ("hl" tags "+home+Lisa") + ("hp" tags "+home+Peter") + ("hk" tags "+home+Kim"))) +@end lisp + +The initial string in each entry defines the keys you have to press +after the dispatcher command in order to access the command. Usually +this is just a single character, but if you have many similar +commands, you can also define two-letter combinations where the first +character is the same in several combinations and serves as a prefix +key@footnote{You can provide a description for a prefix key by inserting +a cons cell with the prefix and the description.}. The second parameter is the search type, followed by the +string or regular expression to be used for the matching. The example +above will therefore define: + +@table @asis +@item @kbd{x} +as a global search for agenda entries planned@footnote{@emph{Planned} means here that these entries have some planning +information attached to them, like a time-stamp, a scheduled or +a deadline string. See @code{org-agenda-entry-types} on how to set what +planning information is taken into account.} this week/day. + +@item @kbd{y} +as the same search, but only for entries with an hour specification +like @samp{[h]h:mm}---think of them as appointments. + +@item @kbd{w} +as a global search for TODO entries with @samp{WAITING} as the TODO +keyword. + +@item @kbd{W} +as the same search, but only in the current buffer and displaying +the results as a sparse tree. + +@item @kbd{u} +as a global tags search for headlines tagged @samp{boss} but not +@samp{urgent}. + +@item @kbd{v} +The same search, but limiting it to headlines that are also TODO +items. + +@item @kbd{U} +as the same search, but only in the current buffer and displaying +the result as a sparse tree. + +@item @kbd{f} +to create a sparse tree (again, current buffer only) with all +entries containing the word @samp{FIXME}. + +@item @kbd{h} +as a prefix command for a @samp{HOME} tags search where you have to press +an additional key (@kbd{l}, @kbd{p} or @kbd{k}) to +select a name (Lisa, Peter, or Kim) as additional tag to match. +@end table + +Note that @code{*-tree} agenda views need to be called from an Org buffer +as they operate on the current buffer only. + +@node Block agenda +@subsection Block agenda + +@cindex block agenda +@cindex agenda, with block views + +Another possibility is the construction of agenda views that comprise +the results of @emph{several} commands, each of which creates a block in +the agenda buffer. The available commands include @code{agenda} for the +daily or weekly agenda (as created with @kbd{a}) , @code{alltodo} for +the global TODO list (as constructed with @kbd{t}), @code{stuck} for +the list of stuck projects (as obtained with @kbd{#}) and the +matching commands discussed above: @code{todo}, @code{tags}, and @code{tags-todo}. + +Here are two examples: + +@lisp +(setq org-agenda-custom-commands + '(("h" "Agenda and Home-related tasks" + ((agenda "") + (tags-todo "home") + (tags "garden"))) + ("o" "Agenda and Office-related tasks" + ((agenda "") + (tags-todo "work") + (tags "office"))))) +@end lisp + +@noindent +This defines @kbd{h} to create a multi-block view for stuff you +need to attend to at home. The resulting agenda buffer contains your +agenda for the current week, all TODO items that carry the tag @samp{home}, +and also all lines tagged with @samp{garden}. Finally the command +@kbd{o} provides a similar view for office tasks. + +@node Setting options +@subsection Setting options for custom commands + +@cindex options, for custom agenda views + +@vindex org-agenda-custom-commands +Org mode contains a number of variables regulating agenda construction +and display. The global variables define the behavior for all agenda +commands, including the custom commands. However, if you want to +change some settings just for a single custom view, you can do so. +Setting options requires inserting a list of variable names and values +at the right spot in @code{org-agenda-custom-commands}. For example: + +@lisp +(setq org-agenda-custom-commands + '(("w" todo "WAITING" + ((org-agenda-sorting-strategy '(priority-down)) + (org-agenda-prefix-format " Mixed: "))) + ("U" tags-tree "+boss-urgent" + ((org-show-context-detail 'minimal))) + ("N" search "" + ((org-agenda-files '("~org/notes.org")) + (org-agenda-text-search-extra-files nil))))) +@end lisp + +@noindent +Now the @kbd{w} command sorts the collected entries only by +priority, and the prefix format is modified to just say @samp{Mixed:} +instead of giving the category of the entry. The sparse tags tree of +@kbd{U} now turns out ultra-compact, because neither the headline +hierarchy above the match, nor the headline following the match are +shown. The command @kbd{N} does a text search limited to only +a single file. + +For command sets creating a block agenda, @code{org-agenda-custom-commands} +has two separate spots for setting options. You can add options that +should be valid for just a single command in the set, and options that +should be valid for all commands in the set. The former are just +added to the command entry; the latter must come after the list of +command entries. Going back to the block agenda example (see @ref{Block agenda}), let's change the sorting strategy for the @kbd{h} +commands to @code{priority-down}, but let's sort the results for @samp{garden} +tags query in the opposite order, @code{priority-up}. This would look like +this: + +@lisp +(setq org-agenda-custom-commands + '(("h" "Agenda and Home-related tasks" + ((agenda) + (tags-todo "home") + (tags "garden" + ((org-agenda-sorting-strategy '(priority-up))))) + ((org-agenda-sorting-strategy '(priority-down)))) + ("o" "Agenda and Office-related tasks" + ((agenda) + (tags-todo "work") + (tags "office"))))) +@end lisp + +As you see, the values and parentheses setting is a little complex. +When in doubt, use the customize interface to set this variable---it +fully supports its structure. Just one caveat: when setting options +in this interface, the @emph{values} are just Lisp expressions. So if the +value is a string, you need to add the double-quotes around the value +yourself. + +@vindex org-agenda-custom-commands-contexts +To control whether an agenda command should be accessible from +a specific context, you can customize +@code{org-agenda-custom-commands-contexts}. Let's say for example that you +have an agenda command @kbd{o} displaying a view that you only +need when reading emails. Then you would configure this option like +this: + +@lisp +(setq org-agenda-custom-commands-contexts + '(("o" (in-mode . "message-mode")))) +@end lisp + +You can also tell that the command key @kbd{o} should refer to +another command key @kbd{r}. In that case, add this command key +like this: + +@lisp +(setq org-agenda-custom-commands-contexts + '(("o" "r" (in-mode . "message-mode")))) +@end lisp + +See the docstring of the variable for more information. + +@node Exporting Agenda Views +@section Exporting Agenda Views + +@cindex agenda views, exporting + +If you are away from your computer, it can be very useful to have +a printed version of some agenda views to carry around. Org mode can +export custom agenda views as plain text, HTML@footnote{For HTML you need to install Hrvoje NikÅ¡ić's @samp{htmlize.el} +as an Emacs package from MELPA or from @uref{https://github.com/hniksic/emacs-htmlize, Hrvoje NikÅ¡ić's repository}.}, Postscript, +PDF@footnote{To create PDF output, the Ghostscript ps2pdf utility must be +installed on the system. Selecting a PDF file also creates the +postscript file.}, and iCalendar files. If you want to do this only +occasionally, use the following command: + +@table @asis +@item @kbd{C-x C-w} (@code{org-agenda-write}) +@kindex C-x C-w +@findex org-agenda-write +@cindex exporting agenda views +@cindex agenda views, exporting + +@vindex org-agenda-exporter-settings +Write the agenda view to a file. +@end table + +If you need to export certain agenda views frequently, you can +associate any custom agenda command with a list of output file +names@footnote{If you want to store standard views like the weekly agenda or +the global TODO list as well, you need to define custom commands for +them in order to be able to specify file names.}. Here is an example that first defines custom commands +for the agenda and the global TODO list, together with a number of +files to which to export them. Then we define two block agenda +commands and specify file names for them as well. File names can be +relative to the current working directory, or absolute. + +@lisp +(setq org-agenda-custom-commands + '(("X" agenda "" nil ("agenda.html" "agenda.ps")) + ("Y" alltodo "" nil ("todo.html" "todo.txt" "todo.ps")) + ("h" "Agenda and Home-related tasks" + ((agenda "") + (tags-todo "home") + (tags "garden")) + nil + ("~/views/home.html")) + ("o" "Agenda and Office-related tasks" + ((agenda) + (tags-todo "work") + (tags "office")) + nil + ("~/views/office.ps" "~/calendars/office.ics")))) +@end lisp + +The extension of the file name determines the type of export. If it +is @samp{.html}, Org mode uses the htmlize package to convert the buffer to +HTML and save it to this file name. If the extension is @samp{.ps}, +@code{ps-print-buffer-with-faces} is used to produce Postscript output. If +the extension is @samp{.ics}, iCalendar export is run export over all files +that were used to construct the agenda, and limit the export to +entries listed in the agenda. Any other extension produces a plain +ASCII file. + +The export files are @emph{not} created when you use one of those +commands interactively because this might use too much overhead. +Instead, there is a special command to produce @emph{all} specified +files in one step: + +@table @asis +@item @kbd{e} (@code{org-store-agenda-views}) +@kindex e @r{(Agenda dispatcher)} +@findex org-store-agenda-views +Export all agenda views that have export file names associated with +them. +@end table + +You can use the options section of the custom agenda commands to also +set options for the export commands. For example: + +@lisp +(setq org-agenda-custom-commands + '(("X" agenda "" + ((ps-number-of-columns 2) + (ps-landscape-mode t) + (org-agenda-prefix-format " [ ] ") + (org-agenda-with-colors nil) + (org-agenda-remove-tags t)) + ("theagenda.ps")))) +@end lisp + +@noindent +@vindex org-agenda-exporter-settings +This command sets two options for the Postscript exporter, to make it +print in two columns in landscape format---the resulting page can be +cut in two and then used in a paper agenda. The remaining settings +modify the agenda prefix to omit category and scheduling information, +and instead include a checkbox to check off items. We also remove the +tags to make the lines compact, and we do not want to use colors for +the black-and-white printer. Settings specified in +@code{org-agenda-exporter-settings} also apply, e.g., + +@lisp +(setq org-agenda-exporter-settings + '((ps-number-of-columns 2) + (ps-landscape-mode t) + (org-agenda-add-entry-text-maxlines 5) + (htmlize-output-type 'css))) +@end lisp + +@noindent +but the settings in @code{org-agenda-custom-commands} take precedence. + +From the command line you may also use: + +@example +emacs -eval (org-batch-store-agenda-views) -kill +@end example + +@noindent +or, if you need to modify some parameters@footnote{Quoting depends on the system you use, please check the FAQ +for examples.} + +@example +emacs -eval '(org-batch-store-agenda-views \ + org-agenda-span (quote month) \ + org-agenda-start-day "2007-11-01" \ + org-agenda-include-diary nil \ + org-agenda-files (quote ("~/org/project.org")))' \ + -kill +@end example + +@noindent +which creates the agenda views restricted to the file +@samp{~/org/project.org}, without diary entries and with a 30-day extent. + +You can also extract agenda information in a way that allows further +processing by other programs. See @ref{Extracting Agenda Information}, for +more information. + +@node Agenda Column View +@section Using Column View in the Agenda + +@cindex column view, in agenda +@cindex agenda, column view + +Column view (see @ref{Column View}) is normally used to view and edit +properties embedded in the hierarchical structure of an Org file. It +can be quite useful to use column view also from the agenda, where +entries are collected by certain criteria. + +@table @asis +@item @kbd{C-c C-x C-c} (@code{org-agenda-columns}) +@kindex C-c C-x C-c +@findex org-agenda-columns + +Turn on column view in the agenda. +@end table + +To understand how to use this properly, it is important to realize +that the entries in the agenda are no longer in their proper outline +environment. This causes the following issues: + +@enumerate +@item +@vindex org-columns-default-format-for-agenda +@vindex org-columns-default-format +Org needs to make a decision which columns format to use. Since +the entries in the agenda are collected from different files, and +different files may have different columns formats, this is a +non-trivial problem. Org first checks if +@code{org-overriding-columns-format} is currently set, and if so, takes +the format from there. You should set this variable only in the +@emph{local settings section} of a custom agenda command (see @ref{Custom Agenda Views}) to make it valid for that specific agenda view. If +no such binding exists, it checks, in sequence, +@code{org-columns-default-format-for-agenda}, the format associated with +the first item in the agenda (through a property or a @samp{#+COLUMNS} +setting in that buffer) and finally @code{org-columns-default-format}. + +@item +@cindex @samp{CLOCKSUM}, special property +If any of the columns has a summary type defined (see @ref{Column attributes}), turning on column view in the agenda visits all +relevant agenda files and make sure that the computations of this +property are up to date. This is also true for the special +@samp{CLOCKSUM} property. Org then sums the values displayed in the +agenda. In the daily/weekly agenda, the sums cover a single day; +in all other views they cover the entire block. + +It is important to realize that the agenda may show the same entry +@emph{twice}---for example as scheduled and as a deadline---and it may +show two entries from the same hierarchy (for example a @emph{parent} +and its @emph{child}). In these cases, the summation in the agenda +leads to incorrect results because some values count double. + +@item +When the column view in the agenda shows the @samp{CLOCKSUM} property, +that is always the entire clocked time for this item. So even in +the daily/weekly agenda, the clocksum listed in column view may +originate from times outside the current view. This has the +advantage that you can compare these values with a column listing +the planned total effort for a task---one of the major +applications for column view in the agenda. If you want +information about clocked time in the displayed period use clock +table mode (press @kbd{R} in the agenda). + +@item +@cindex @samp{CLOCKSUM_T}, special property +When the column view in the agenda shows the @samp{CLOCKSUM_T} property, +that is always today's clocked time for this item. So even in the +weekly agenda, the clocksum listed in column view only originates +from today. This lets you compare the time you spent on a task for +today, with the time already spent---via @samp{CLOCKSUM}---and with +the planned total effort for it. +@end enumerate + +@node Markup for Rich Contents +@chapter Markup for Rich Contents + +Org is primarily about organizing and searching through your +plain-text notes. However, it also provides a lightweight yet robust +markup language for rich text formatting and more. For instance, you +may want to center or emphasize text. Or you may need to insert +a formula or image in your writing. Org offers syntax for all of this +and more. Used in conjunction with the export framework (see +@ref{Exporting}), you can author beautiful documents in Org---like the fine +manual you are currently reading. + +@menu +* Paragraphs:: The basic unit of text. +* Emphasis and Monospace:: Bold, italic, etc. +* Subscripts and Superscripts:: Simple syntax for raising/lowering text. +* Special Symbols:: Greek letters and other symbols. +* Embedded @LaTeX{}:: LaTeX can be freely used inside Org documents. +* Literal Examples:: Source code examples with special formatting. +* Images:: Display an image. +* Captions:: Describe tables, images... +* Horizontal Rules:: Make a line. +* Creating Footnotes:: Edit and read footnotes. +@end menu + +@node Paragraphs +@section Paragraphs + +@cindex paragraphs, markup rules +Paragraphs are separated by at least one empty line. If you need to +enforce a line break within a paragraph, use @samp{\\} at the end of +a line. + +@cindex line breaks, markup rules +To preserve the line breaks, indentation and blank lines in a region, +but otherwise use normal formatting, you can use this construct, which +can also be used to format poetry. + +@cindex @samp{BEGIN_VERSE} +@cindex verse blocks +@example +#+BEGIN_VERSE + Great clouds overhead + Tiny black birds rise and fall + Snow covers Emacs + + ---AlexSchroeder +#+END_VERSE +@end example + +When quoting a passage from another document, it is customary to +format this as a paragraph that is indented on both the left and the +right margin. You can include quotations in Org documents like this: + +@cindex @samp{BEGIN_QUOTE} +@cindex quote blocks +@example +#+BEGIN_QUOTE +Everything should be made as simple as possible, +but not any simpler ---Albert Einstein +#+END_QUOTE +@end example + +If you would like to center some text, do it like this: + +@cindex @samp{BEGIN_CENTER} +@cindex center blocks +@example +#+BEGIN_CENTER +Everything should be made as simple as possible, \\ +but not any simpler +#+END_CENTER +@end example + +@node Emphasis and Monospace +@section Emphasis and Monospace + +@cindex underlined text, markup rules +@cindex bold text, markup rules +@cindex italic text, markup rules +@cindex verbatim text, markup rules +@cindex code text, markup rules +@cindex strike-through text, markup rules + +You can make words @samp{*bold*}, @samp{/italic/}, @samp{_underlined_}, @samp{=verbatim=} +and @samp{~code~}, and, if you must, @samp{+strike-through+}. Text in the code +and verbatim string is not processed for Org specific syntax; it is +exported verbatim. + +@vindex org-fontify-emphasized-text +To turn off fontification for marked up text, you can set +@code{org-fontify-emphasized-text} to @code{nil}. To narrow down the list of +available markup syntax, you can customize @code{org-emphasis-alist}. + +Sometimes, when marked text also contains the marker character itself, +the result may be unsettling. For example, + +@example +/One may expect this whole sentence to be italicized, but the +following ~user/?variable~ contains =/= character, which effectively +stops emphasis there./ +@end example + +You can use zero width space to help Org sorting out the ambiguity. +See @ref{Escape Character} for more details. + +@node Subscripts and Superscripts +@section Subscripts and Superscripts + +@cindex subscript +@cindex superscript + +@samp{^} and @samp{_} are used to indicate super- and subscripts. To increase +the readability of ASCII text, it is not necessary, but OK, to +surround multi-character sub- and superscripts with curly braces. For +example + +@example +The radius of the sun is R_sun = 6.96 x 10^8 m. On the other hand, +the radius of Alpha Centauri is R_@{Alpha Centauri@} = 1.28 x R_@{sun@}. +@end example + +@vindex org-use-sub-superscripts +If you write a text where the underscore is often used in a different +context, Org's convention to always interpret these as subscripts can +get in your way. Configure the variable @code{org-use-sub-superscripts} to +change this convention. For example, when setting this variable to +@code{@{@}}, @samp{a_b} is not interpreted as a subscript, but @samp{a_@{b@}} is. + +You can set @code{org-use-sub-superscripts} in a file using the export +option @samp{^:} (see @ref{Export Settings}). For example, @samp{#+OPTIONS: ^:@{@}} +sets @code{org-use-sub-superscripts} to @code{@{@}} and limits super- and +subscripts to the curly bracket notation. + +You can also toggle the visual display of super- and subscripts: + +@table @asis +@item @kbd{C-c C-x \} (@code{org-toggle-pretty-entities}) +@kindex C-c C-x \ +@findex org-toggle-pretty-entities +This command formats sub- and superscripts in a WYSIWYM way. +@end table + +@vindex org-pretty-entities +@vindex org-pretty-entities-include-sub-superscripts +Set both @code{org-pretty-entities} and +@code{org-pretty-entities-include-sub-superscripts} to @code{t} to start with +super- and subscripts @emph{visually} interpreted as specified by the +option @code{org-use-sub-superscripts}. + +@node Special Symbols +@section Special Symbols + +@cindex math symbols +@cindex special symbols +@cindex entities + +You can use @LaTeX{}-like syntax to insert special symbols---named +entities---like @samp{\alpha} to indicate the Greek letter, or @samp{\to} to indicate +an arrow. Completion for these symbols is available, just type @samp{\} +and maybe a few letters, and press @kbd{M-@key{TAB}} to see possible +completions. If you need such a symbol inside a word, terminate it +with a pair of curly brackets. For example + +@example +Pro tip: Given a circle \Gamma of diameter d, the length of its +circumference is \pi@{@}d. +@end example + +@findex org-entities-help +@vindex org-entities-user +A large number of entities is provided, with names taken from both +HTML and @LaTeX{}; you can comfortably browse the complete list from +a dedicated buffer using the command @code{org-entities-help}. It is also +possible to provide your own special symbols in the variable +@code{org-entities-user}. + +During export, these symbols are transformed into the native format of +the exporter back-end. Strings like @samp{\alpha} are exported as @samp{α} in +the HTML output, and as @samp{\(\alpha\)} in the @LaTeX{} output. Similarly, @samp{\nbsp} +becomes @samp{ } in HTML and @samp{~} in @LaTeX{}. + +@cindex special symbols, in-buffer display +If you would like to see entities displayed as UTF-8 characters, use +the following command@footnote{You can turn this on by default by setting the variable +@code{org-pretty-entities}, or on a per-file base with the @samp{STARTUP} option +@samp{entitiespretty}.}: + +@table @asis +@item @kbd{C-c C-x \} (@code{org-toggle-pretty-entities}) +@kindex C-c C-x \ +@findex org-toggle-pretty-entities + +Toggle display of entities as UTF-8 characters. This does not +change the buffer content which remains plain ASCII, but it overlays +the UTF-8 character for display purposes only. +@end table + +@cindex shy hyphen, special symbol +@cindex dash, special symbol +@cindex ellipsis, special symbol +In addition to regular entities defined above, Org exports in +a special way@footnote{This behavior can be disabled with @samp{-} export setting (see +@ref{Export Settings}).} the following commonly used character +combinations: @samp{\-} is treated as a shy hyphen, @samp{--} and @samp{---} are +converted into dashes, and @samp{...} becomes a compact set of dots. + +@node Embedded @LaTeX{} +@section Embedded @LaTeX{} + +@cindex @TeX{} interpretation +@cindex @LaTeX{} interpretation + +Plain ASCII is normally sufficient for almost all note taking. +Exceptions include scientific notes, which often require mathematical +symbols and the occasional formula. @LaTeX{}@footnote{@LaTeX{} is a macro system based on Donald@tie{}E@.@tie{}Knuth's @TeX{} +system. Many of the features described here as ``@LaTeX{}'' are really +from @TeX{}, but for simplicity I am blurring this distinction.} is widely used to +typeset scientific documents. Org mode supports embedding @LaTeX{} code +into its files, because many academics are used to writing and reading +@LaTeX{} source code, and because it can be readily processed to produce +pretty output for a number of export back-ends. + +@menu +* @LaTeX{} fragments:: Complex formulas made easy. +* Previewing @LaTeX{} fragments:: What will this snippet look like? +* CD@LaTeX{} mode:: Speed up entering of formulas. +@end menu + +@node @LaTeX{} fragments +@subsection @LaTeX{} fragments + +@cindex @LaTeX{} fragments + +@vindex org-format-latex-header +Org mode can contain @LaTeX{} math fragments, and it supports ways to +process these for several export back-ends. When exporting to @LaTeX{}, +the code is left as it is. When exporting to HTML, Org can use either +@uref{https://www.mathjax.org, MathJax} (see @ref{Math formatting in HTML export}) or transcode the math +into images (see @ref{Previewing @LaTeX{} fragments}). + +@LaTeX{} fragments do not need any special marking at all. The following +snippets are identified as @LaTeX{} source code: + +@itemize +@item +Environments of any kind@footnote{When MathJax is used, only the environments recognized by +MathJax are processed. When dvipng, dvisvgm, or ImageMagick suite is +used to create images, any @LaTeX{} environment is handled.}. The only requirement is that the +@samp{\begin} statement appears on a new line, preceded by only +whitespace. + +@item +Text within the usual @LaTeX{} math delimiters. To avoid conflicts +with currency specifications, single @samp{$} characters are only +recognized as math delimiters if the enclosed text contains at most +two line breaks, is directly attached to the @samp{$} characters with no +whitespace in between, and if the closing @samp{$} is followed by +whitespace, punctuation or a dash. For the other delimiters, there +is no such restriction, so when in doubt, use @samp{\(...\)} as inline +math delimiters. +@end itemize + +@noindent +For example: + +@example +\begin@{equation@} % arbitrary environments, +x=\sqrt@{b@} % even tables, figures +\end@{equation@} % etc + +If $a^2=b$ and \( b=2 \), then the solution must be +either $$ a=+\sqrt@{2@} $$ or \[ a=-\sqrt@{2@} \]. +@end example + +@vindex org-export-with-latex +@LaTeX{} processing can be configured with the variable +@code{org-export-with-latex}. The default setting is @code{t} which means +MathJax for HTML, and no processing for ASCII and @LaTeX{} back-ends. +You can also set this variable on a per-file basis using one of these +lines: + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{#+OPTIONS: tex:t} +@tab Do the right thing automatically (MathJax) +@item @samp{#+OPTIONS: tex:nil} +@tab Do not process @LaTeX{} fragments at all +@item @samp{#+OPTIONS: tex:verbatim} +@tab Verbatim export, for jsMath or so +@end multitable + +@node Previewing @LaTeX{} fragments +@subsection Previewing @LaTeX{} fragments + +@cindex @LaTeX{} fragments, preview + +@vindex org-preview-latex-default-process +If you have a working @LaTeX{} installation and @samp{dvipng}, @samp{dvisvgm} or +@samp{convert} installed@footnote{These are respectively available at +@uref{http://sourceforge.net/projects/dvipng/}, @uref{http://dvisvgm.bplaced.net/} +and from the ImageMagick suite. Choose the converter by setting the +variable @code{org-preview-latex-default-process} accordingly.}, @LaTeX{} fragments can be processed to +produce images of the typeset expressions to be used for inclusion +while exporting to HTML (see @ref{@LaTeX{} fragments}), or for inline +previewing within Org mode. + +@vindex org-format-latex-options +@vindex org-format-latex-header +You can customize the variables @code{org-format-latex-options} and +@code{org-format-latex-header} to influence some aspects of the preview. +In particular, the @code{:scale} (and for HTML export, @code{:html-scale}) +property of the former can be used to adjust the size of the preview +images. + +@table @asis +@item @kbd{C-c C-x C-l} (@code{org-latex-preview}) +@kindex C-c C-x C-l +@findex org-latex-preview + +Produce a preview image of the @LaTeX{} fragment at point and overlay +it over the source code. If there is no fragment at point, process +all fragments in the current entry---between two headlines. + +When called with a single prefix argument, clear all images in the +current entry. Two prefix arguments produce a preview image for all +fragments in the buffer, while three of them clear all the images in +that buffer. +@end table + +@vindex org-startup-with-latex-preview +You can turn on the previewing of all @LaTeX{} fragments in a file with + +@example +#+STARTUP: latexpreview +@end example + + +To disable it, simply use + +@example +#+STARTUP: nolatexpreview +@end example + +@node CD@LaTeX{} mode +@subsection Using CD@LaTeX{} to enter math + +@cindex CD@LaTeX{} + +CD@LaTeX{} mode is a minor mode that is normally used in combination with +a major @LaTeX{} mode like AUC@TeX{} in order to speed-up insertion of +environments and math templates. Inside Org mode, you can make use of +some of the features of CD@LaTeX{} mode. You need to install +@samp{cdlatex.el} and @samp{texmathp.el} (the latter comes also with AUC@TeX{}) +using @uref{https://melpa.org/, MELPA} with the @uref{https://www.gnu.org/software/emacs/manual/html_node/emacs/Package-Installation.html, Emacs packaging system} or alternatively from +@uref{https://staff.fnwi.uva.nl/c.dominik/Tools/cdlatex/}. Do not use +CD@LaTeX{} mode itself under Org mode, but use the special version Org +CD@LaTeX{} minor mode that comes as part of Org. Turn it on for the +current buffer with @kbd{M-x org-cdlatex-mode}, or for all Org +files with + +@lisp +(add-hook 'org-mode-hook #'turn-on-org-cdlatex) +@end lisp + +When this mode is enabled, the following features are present (for +more details see the documentation of CD@LaTeX{} mode): + +@table @asis +@item @kbd{C-c @{} +@kindex C-c @{ + +Insert an environment template. + +@item @kbd{@key{TAB}} +@kindex TAB + +The @kbd{@key{TAB}} key expands the template if point is inside +a @LaTeX{} fragment@footnote{Org mode has a method to test if point is inside such +a fragment, see the documentation of the function +@code{org-inside-LaTeX-fragment-p}.}. For example, @kbd{@key{TAB}} expands @samp{fr} +to @samp{\frac@{@}@{@}} and position point correctly inside the first brace. +Another @kbd{@key{TAB}} gets you into the second brace. + +Even outside fragments, @kbd{@key{TAB}} expands environment +abbreviations at the beginning of a line. For example, if you write +@samp{equ} at the beginning of a line and press @kbd{@key{TAB}}, this +abbreviation is expanded to an @samp{equation} environment. To get +a list of all abbreviations, type @kbd{M-x cdlatex-command-help}. + +@item @kbd{^} +@itemx @kbd{_} +@kindex _ +@kindex ^ +@vindex cdlatex-simplify-sub-super-scripts + +Pressing @kbd{_} and @kbd{^} inside a @LaTeX{} fragment +inserts these characters together with a pair of braces. If you use +@kbd{@key{TAB}} to move out of the braces, and if the braces surround +only a single character or macro, they are removed again (depending +on the variable @code{cdlatex-simplify-sub-super-scripts}). + +@item @kbd{`} +@kindex ` + +Pressing the backquote followed by a character inserts math macros, +also outside @LaTeX{} fragments. If you wait more than 1.5 seconds +after the backquote, a help window pops up. + +@item @kbd{'} +@kindex ' + +Pressing the single-quote followed by another character modifies the +symbol before point with an accent or a font. If you wait more than +1.5 seconds after the single-quote, a help window pops up. +Character modification works only inside @LaTeX{} fragments; outside +the quote is normal. +@end table + +@node Literal Examples +@section Literal Examples + +@cindex literal examples, markup rules +@cindex code line references, markup rules + +You can include literal examples that should not be subjected to +markup. Such examples are typeset in monospace, so this is well +suited for source code and similar examples. + +@cindex @samp{BEGIN_EXAMPLE} +@cindex example block +@example +#+BEGIN_EXAMPLE + Some example from a text file. +#+END_EXAMPLE +@end example + +@cindex comma escape, in literal examples +There is one limitation, however. You must insert a comma right +before lines starting with either @samp{*}, @samp{,*}, @samp{#+} or @samp{,#+}, as those +may be interpreted as outlines nodes or some other special syntax. +Org transparently strips these additional commas whenever it accesses +the contents of the block. + +@example +#+BEGIN_EXAMPLE +,* I am no real headline +#+END_EXAMPLE +@end example + +For simplicity when using small examples, you can also start the +example lines with a colon followed by a space. There may also be +additional whitespace before the colon: + +@example +Here is an example + : Some example from a text file. +@end example + +@cindex formatting source code, markup rules +@vindex org-latex-listings +If the example is source code from a programming language, or any +other text that can be marked up by Font Lock in Emacs, you can ask +for the example to look like the fontified Emacs buffer@footnote{This works automatically for the HTML backend (it requires +version 1.34 of the @samp{htmlize.el} package, which you need to install). +Fontified code chunks in @LaTeX{} can be achieved using either the +@uref{https://www.ctan.org/pkg/listings, listings} package or the @uref{https://www.ctan.org/pkg/minted, minted} package. Refer to +@code{org-latex-listings} for details.}. This +is done with the code block, where you also need to specify the name +of the major mode that should be used to fontify the example@footnote{Source code in code blocks may also be evaluated either +interactively or on export. See @ref{Working with Source Code} for more +information on evaluating code blocks.}, +see @ref{Structure Templates} for shortcuts to easily insert code blocks. + +@cindex @samp{BEGIN_SRC} +@cindex source block +@example +#+BEGIN_SRC emacs-lisp + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) + #+END_SRC +@end example + +Both in @samp{example} and in @samp{src} snippets, you can add a @samp{-n} switch to +the end of the @samp{#+BEGIN} line, to get the lines of the example +numbered. The @samp{-n} takes an optional numeric argument specifying the +starting line number of the block. If you use a @samp{+n} switch, the +numbering from the previous numbered snippet is continued in the +current one. The @samp{+n} switch can also take a numeric argument. This +adds the value of the argument to the last line of the previous block +to determine the starting line number. + +@example +#+BEGIN_SRC emacs-lisp -n 20 + ;; This exports with line number 20. + (message "This is line 21") +#+END_SRC + +#+BEGIN_SRC emacs-lisp +n 10 + ;; This is listed as line 31. + (message "This is line 32") +#+END_SRC +@end example + +In literal examples, Org interprets strings like @samp{(ref:name)} as +labels, and use them as targets for special hyperlinks like +@samp{[[(name)]]}---i.e., the reference name enclosed in single parenthesis. +In HTML, hovering the mouse over such a link remote-highlights the +corresponding code line, which is kind of cool. + +You can also add a @samp{-r} switch which @emph{removes} the labels from the +source code@footnote{Adding @samp{-k} to @samp{-n -r} @emph{keeps} the labels in the source code +while using line numbers for the links, which might be useful to +explain those in an Org mode example code.}. With the @samp{-n} switch, links to these references +are labeled by the line numbers from the code listing. Otherwise +links use the labels with no parentheses. Here is an example: + +@example +#+BEGIN_SRC emacs-lisp -n -r + (save-excursion (ref:sc) + (goto-char (point-min)) (ref:jump) +#+END_SRC +In line [[(sc)]] we remember the current position. [[(jump)][Line (jump)]] +jumps to point-min. +@end example + +@cindex indentation, in source blocks +Source code and examples may be @emph{indented} in order to align nicely +with the surrounding text, and in particular with plain list structure +(see @ref{Plain Lists}). By default, Org only retains the relative +indentation between lines, e.g., when exporting the contents of the +block. However, you can use the @samp{-i} switch to also preserve the +global indentation, if it does matter. See @ref{Editing Source Code}. + +@vindex org-coderef-label-format +If the syntax for the label format conflicts with the language syntax, +use a @samp{-l} switch to change the format, for example + +@example +#+BEGIN_SRC pascal -n -r -l "((%s))" +@end example + + +@noindent +See also the variable @code{org-coderef-label-format}. + +HTML export also allows examples to be published as text areas (see +@ref{Text areas in HTML export}). + +Because the @samp{#+BEGIN} @dots{} @samp{#+END} patterns need to be added so often, +a shortcut is provided (see @ref{Structure Templates}). + +@table @asis +@item @kbd{C-c '} (@code{org-edit-special}) +@kindex C-c ' +@findex org-edit-special +Edit the source code example at point in its native mode. This +works by switching to a temporary buffer with the source code. You +need to exit by pressing @kbd{C-c '} again. The edited version +then replaces the old version in the Org buffer. Fixed-width +regions---where each line starts with a colon followed by +a space---are edited using Artist mode@footnote{You may select a different mode with the variable +@code{org-edit-fixed-width-region-mode}.} to allow creating +ASCII drawings easily. Using this command in an empty line creates +a new fixed-width region. +@end table + +@cindex storing link, in a source code buffer +Calling @code{org-store-link} (see @ref{Handling Links}) while editing a source +code example in a temporary buffer created with @kbd{C-c '} +prompts for a label. Make sure that it is unique in the current +buffer, and insert it with the proper formatting like @samp{(ref:label)} at +the end of the current line. Then the label is stored as a link +@samp{(label)}, for retrieval with @kbd{C-c C-l}. + +@node Images +@section Images + +@cindex inlining images +@cindex images, markup rules +An image is a link to an image file@footnote{What Emacs considers to be an image depends on +@code{image-file-name-extensions} and @code{image-file-name-regexps}.} that does not have +a description part, for example + +@example +./img/cat.jpg +@end example + + +If you wish to define a caption for the image (see @ref{Captions}) and +maybe a label for internal cross references (see @ref{Internal Links}), +make sure that the link is on a line by itself and precede it with +@samp{CAPTION} and @samp{NAME} keywords as follows: + +@example +#+CAPTION: This is the caption for the next figure link (or table) +#+NAME: fig:SED-HR4049 +[[./img/a.jpg]] +@end example + +Such images can be displayed within the buffer with the following +command: + +@table @asis +@item @kbd{C-c C-x C-v} (@code{org-toggle-inline-images}) +@kindex C-c C-x C-v +@findex org-toggle-inline-images +@vindex org-startup-with-inline-images +Toggle the inline display of linked images. When called with +a prefix argument, also display images that do have a link +description. You can ask for inline images to be displayed at +startup by configuring the variable +@code{org-startup-with-inline-images}@footnote{The variable @code{org-startup-with-inline-images} can be set +within a buffer with the @samp{STARTUP} options @samp{inlineimages} and +@samp{noinlineimages}.}. +@end table + +@node Captions +@section Captions + +@cindex captions, markup rules +@cindex @samp{CAPTION}, keyword + +You can assign a caption to a specific part of a document by inserting +a @samp{CAPTION} keyword immediately before it: + +@example +#+CAPTION: This is the caption for the next table (or link) +| ... | ... | +|-----+-----| +@end example + +Optionally, the caption can take the form: + +@example +#+CAPTION[Short caption]: Longer caption. +@end example + + +Even though images and tables are prominent examples of captioned +structures, the same caption mechanism can apply to many +others---e.g., @LaTeX{} equations, source code blocks. Depending on the +export back-end, those may or may not be handled. + +@node Horizontal Rules +@section Horizontal Rules + +@cindex horizontal rules, markup rules +A line consisting of only dashes, and at least 5 of them, is exported +as a horizontal line. + +@node Creating Footnotes +@section Creating Footnotes + +@cindex footnotes + +A footnote is started by a footnote marker in square brackets in +column 0, no indentation allowed. It ends at the next footnote +definition, headline, or after two consecutive empty lines. The +footnote reference is simply the marker in square brackets, inside +text. Markers always start with @samp{fn:}. For example: + +@example +The Org homepage[fn:1] now looks a lot better than it used to. +... +[fn:1] The link is: https://orgmode.org +@end example + +Org mode extends the number-based syntax to @emph{named} footnotes and +optional inline definition. Here are the valid references: + +@table @asis +@item @samp{[fn:NAME]} +A named footnote reference, where @var{NAME} is a unique +label word, or, for simplicity of automatic creation, a number. + +@item @samp{[fn:: This is the inline definition of this footnote]} +An anonymous footnote where the definition is given directly at the +reference point. + +@item @samp{[fn:NAME: a definition]} +An inline definition of a footnote, which also specifies a name for +the note. Since Org allows multiple references to the same note, +you can then use @samp{[fn:NAME]} to create additional references. +@end table + +@vindex org-footnote-auto-label +Footnote labels can be created automatically, or you can create names +yourself. This is handled by the variable @code{org-footnote-auto-label} +and its corresponding @samp{STARTUP} keywords. See the docstring of that +variable for details. + +The following command handles footnotes: + +@table @asis +@item @kbd{C-c C-x f} +The footnote action command. + +@kindex C-c C-x f +When point is on a footnote reference, jump to the definition. When +it is at a definition, jump to the---first---reference. + +@vindex org-footnote-define-inline +@vindex org-footnote-section +Otherwise, create a new footnote. Depending on the variable +@code{org-footnote-define-inline}@footnote{The corresponding in-buffer setting is: @samp{#+STARTUP: fninline} +or @samp{#+STARTUP: nofninline}.}, the definition is placed right +into the text as part of the reference, or separately into the +location determined by the variable @code{org-footnote-section}. + +When this command is called with a prefix argument, a menu of +additional options is offered: + +@multitable @columnfractions 0.1 0.9 +@item @kbd{s} +@tab Sort the footnote definitions by reference sequence. +@item @kbd{r} +@tab Renumber the simple @samp{fn:N} footnotes. +@item @kbd{S} +@tab Short for first @kbd{r}, then @kbd{s} action. +@item @kbd{n} +@tab Rename all footnotes into a @samp{fn:1} @dots{} @samp{fn:n} sequence. +@item @kbd{d} +@tab Delete the footnote at point, including definition and references. +@end multitable + +@vindex org-footnote-auto-adjust +Depending on the variable @code{org-footnote-auto-adjust}@footnote{The corresponding in-buffer options are @samp{#+STARTUP: fnadjust} +and @samp{#+STARTUP: nofnadjust}.}, +renumbering and sorting footnotes can be automatic after each +insertion or deletion. + +@item @kbd{C-c C-c} +@kindex C-c C-c +If point is on a footnote reference, jump to the definition. If it +is at the definition, jump back to the reference. When called at +a footnote location with a prefix argument, offer the same menu as +@kbd{C-c C-x f}. + +@item @kbd{C-c C-o} or @kbd{mouse-1/2} +@kindex C-c C-o +@kindex mouse-1 +@kindex mouse-2 +Footnote labels are also links to the corresponding definition or +reference, and you can use the usual commands to follow these links. +@end table + +@node Exporting +@chapter Exporting + +@cindex exporting + +At some point you might want to print your notes, publish them on the +web, or share them with people not using Org. Org can convert and +export documents to a variety of other formats while retaining as much +structure (see @ref{Document Structure}) and markup (see @ref{Markup for Rich Contents}) as possible. + +@cindex export back-end +The libraries responsible for translating Org files to other formats +are called @emph{back-ends}. Org ships with support for the following +back-ends: + +@itemize +@item +@emph{ascii} (ASCII format) +@item +@emph{beamer} (@LaTeX{} Beamer format) +@item +@emph{html} (HTML format) +@item +@emph{icalendar} (iCalendar format) +@item +@emph{latex} (@LaTeX{} format) +@item +@emph{md} (Markdown format) +@item +@emph{odt} (OpenDocument Text format) +@item +@emph{org} (Org format) +@item +@emph{texinfo} (Texinfo format) +@item +@emph{man} (Man page format) +@end itemize + +Users can install libraries for additional formats from the Emacs +packaging system. For easy discovery, these packages have a common +naming scheme: @code{ox-NAME}, where @var{NAME} is a format. For +example, @code{ox-koma-letter} for @emph{koma-letter} back-end. More libraries +can be found in the @samp{org-contrib} repository (see @ref{Installation}). + +@vindex org-export-backends +Org only loads back-ends for the following formats by default: ASCII, +HTML, iCalendar, @LaTeX{}, and ODT@. Additional back-ends can be loaded +in either of two ways: by configuring the @code{org-export-backends} +variable, or by requiring libraries in the Emacs init file. For +example, to load the Markdown back-end, add this to your Emacs config: + +@lisp +(require 'ox-md) +@end lisp + +@menu +* The Export Dispatcher:: The main interface. +* Export Settings:: Common export settings. +* Table of Contents:: The if and where of the table of contents. +* Include Files:: Include additional files into a document. +* Macro Replacement:: Use macros to create templates. +* Comment Lines:: What will not be exported. +* ASCII/Latin-1/UTF-8 export:: Exporting to flat files with encoding. +* Beamer Export:: Producing presentations and slides. +* HTML Export:: Exporting to HTML. +* @LaTeX{} Export:: Exporting to @LaTeX{} and processing to PDF. +* Markdown Export:: Exporting to Markdown. +* OpenDocument Text Export:: Exporting to OpenDocument Text. +* Org Export:: Exporting to Org. +* Texinfo Export:: Exporting to Texinfo. +* iCalendar Export:: Exporting to iCalendar. +* Other Built-in Back-ends:: Exporting to a man page. +* Advanced Export Configuration:: Fine-tuning the export output. +* Export in Foreign Buffers:: Author tables and lists in Org syntax. +@end menu + +@node The Export Dispatcher +@section The Export Dispatcher + +@cindex dispatcher, for export commands +@cindex export, dispatcher + +The export dispatcher is the main interface for Org's exports. +A hierarchical menu presents the currently configured export formats. +Options are shown as easy toggle switches on the same screen. + +@vindex org-export-dispatch-use-expert-ui +Org also has a minimal prompt interface for the export dispatcher. +When the variable @code{org-export-dispatch-use-expert-ui} is set to +a non-@code{nil} value, Org prompts in the minibuffer. To switch back to +the hierarchical menu, press @kbd{?}. + +@table @asis +@item @kbd{C-c C-e} (@code{org-export}) +@kindex C-c C-e +@findex org-export + +Invokes the export dispatcher interface. The options show default +settings. The @kbd{C-u} prefix argument preserves options from +the previous export, including any sub-tree selections. +@end table + +Org exports the entire buffer by default. If the Org buffer has an +active region, then Org exports just that region. + +Within the dispatcher interface, the following key combinations can +further alter what is exported, and how. + +@table @asis +@item @kbd{C-a} +@kindex C-c C-e C-a + +Toggle asynchronous export. Asynchronous export uses an external +Emacs process with a specially configured initialization file to +complete the exporting process in the background, without tying-up +Emacs. This is particularly useful when exporting long documents. + +Output from an asynchronous export is saved on the @emph{export stack}. +To view this stack, call the export dispatcher with a double +@kbd{C-u} prefix argument. If already in the export dispatcher +menu, @kbd{&} displays the stack. + +@vindex org-export-in-background +You can make asynchronous export the default by setting +@code{org-export-in-background}. + +@vindex org-export-async-init-file +You can set the initialization file used by the background process +by setting @code{org-export-async-init-file}. + +@item @kbd{C-b} +@kindex C-c C-e C-b + +Toggle body-only export. Useful for excluding headers and footers +in the export. Affects only those back-end formats that have +sections like @samp{...} in HTML@. + +@item @kbd{C-s} +@kindex C-c C-e C-s + +Toggle sub-tree export. When turned on, Org exports only the +sub-tree starting from point position at the time the export +dispatcher was invoked. Org uses the top heading of this sub-tree +as the document's title. If point is not on a heading, Org uses the +nearest enclosing header. If point is in the document preamble, Org +signals an error and aborts export. + +@vindex org-export-initial-scope +To make sub-tree export the default, customize the variable +@code{org-export-initial-scope}. + +@item @kbd{C-v} +@kindex C-c C-e C-v + +Toggle visible-only export. This is useful for exporting only +certain parts of an Org document by adjusting the visibility of +particular headings. See also @ref{Sparse Trees}. +@end table + +@node Export Settings +@section Export Settings + +@cindex options, for export +@cindex Export, settings + +@cindex @samp{OPTIONS}, keyword +Export options can be set: globally with variables; for an individual +file by making variables buffer-local with in-buffer settings (see +@ref{In-buffer Settings}); by setting individual keywords or +specifying them in compact form with the @samp{OPTIONS} keyword; or for +a tree by setting properties (see @ref{Properties and Columns}). Options +set at a specific level override options set at a more general level. + +@cindex @samp{SETUPFILE}, keyword +In-buffer settings may appear anywhere in the file, either directly or +indirectly through a file included using @samp{#+SETUPFILE: filename or +URL} syntax. Option keyword sets tailored to a particular back-end +can be inserted from the export dispatcher (see @ref{The Export Dispatcher}) using the @samp{Insert template} command by pressing +@kbd{#}. To insert keywords individually, a good way to make +sure the keyword is correct is to type @samp{#+} and then to use +@kbd{M-@key{TAB}}@footnote{Many desktops intercept @kbd{M-@key{TAB}} to switch windows. +Use @kbd{C-M-i} or @kbd{@key{ESC} @key{TAB}} instead.} for completion. + +The export keywords available for every back-end, and their equivalent +global variables, include: + +@table @asis +@item @samp{AUTHOR} +@cindex @samp{AUTHOR}, keyword +@vindex user-full-name +The document author (@code{user-full-name}). + +@item @samp{CREATOR} +@cindex @samp{CREATOR}, keyword +@vindex org-expot-creator-string +Entity responsible for output generation +(@code{org-export-creator-string}). + +@item @samp{DATE} +@cindex @samp{DATE}, keyword +@vindex org-export-date-timestamp-format +A date or a time-stamp@footnote{The variable @code{org-export-date-timestamp-format} defines how +this timestamp are exported.}. + +@item @samp{EMAIL} +@cindex @samp{EMAIL}, keyword +@vindex user-mail-address +The email address (@code{user-mail-address}). + +@item @samp{LANGUAGE} +@cindex @samp{LANGUAGE}, keyword +@vindex org-export-default-language +Language to use for translating certain strings +(@code{org-export-default-language}). With @samp{#+LANGUAGE: fr}, for +example, Org translates @samp{Table of contents} to the French @samp{Table des + matières}@footnote{For export to @LaTeX{} format---or @LaTeX{}-related formats such as +Beamer---, the @samp{org-latex-package-alist} variable needs further +configuration. See @ref{@LaTeX{} specific export settings}.}. + +@item @samp{SELECT_TAGS} +@cindex @samp{SELECT_TAGS}, keyword +@vindex org-export-select-tags +The default value is @samp{("export")}. When a tree is tagged with +@samp{export} (@code{org-export-select-tags}), Org selects that tree and its +sub-trees for export. Org excludes trees with @samp{noexport} tags, see +below. When selectively exporting files with @samp{export} tags set, Org +does not export any text that appears before the first headline. + +@item @samp{EXCLUDE_TAGS} +@cindex @samp{EXCLUDE_TAGS}, keyword +@vindex org-export-exclude-tags +The default value is @samp{("noexport")}. When a tree is tagged with +@samp{noexport} (@code{org-export-exclude-tags}), Org excludes that tree and +its sub-trees from export. Entries tagged with @samp{noexport} are +unconditionally excluded from the export, even if they have an +@samp{export} tag. Even if a sub-tree is not exported, Org executes any +code blocks contained there. + +@item @samp{TITLE} +@cindex @samp{TITLE}, keyword +@cindex document title +Org displays this title. For long titles, use multiple @samp{#+TITLE} +lines. + +@item @samp{EXPORT_FILE_NAME} +@cindex @samp{EXPORT_FILE_NAME}, keyword +The name of the output file to be generated. Otherwise, Org +generates the file name based on the buffer name and the extension +based on the back-end format. +@end table + +The @samp{OPTIONS} keyword is a compact form. To configure multiple +options, use several @samp{OPTIONS} lines. @samp{OPTIONS} recognizes the +following arguments. + +@table @asis +@item @code{'} +@vindex org-export-with-smart-quotes +Toggle smart quotes (@code{org-export-with-smart-quotes}). Depending on +the language used, when activated, Org treats pairs of double quotes +as primary quotes, pairs of single quotes as secondary quotes, and +single quote marks as apostrophes. + +@item @code{*} +@vindex org-export-with-emphasize +Toggle emphasized text (@code{org-export-with-emphasize}). + +@item @code{-} +@vindex org-export-with-special-strings +Toggle conversion of special strings +(@code{org-export-with-special-strings}). + +@item @code{:} +@vindex org-export-with-fixed-width +Toggle fixed-width sections (@code{org-export-with-fixed-width}). + +@item @code{<} +@vindex org-export-with-timestamps +Toggle inclusion of time/date active/inactive stamps +(@code{org-export-with-timestamps}). + +@item @code{\n} +@vindex org-export-preserve-breaks +Toggles whether to preserve line breaks +(@code{org-export-preserve-breaks}). + +@item @code{^} +@vindex org-export-with-sub-superscripts +Toggle @TeX{}-like syntax for sub- and superscripts. If you write +@samp{^:@{@}}, @samp{a_@{b@}} is interpreted, but the simple @samp{a_b} is left as it +is (@code{org-export-with-sub-superscripts}). + +@item @code{arch} +@vindex org-export-with-archived-trees +Configure how archived trees are exported. When set to @code{headline}, +the export process skips the contents and processes only the +headlines (@code{org-export-with-archived-trees}). + +@item @code{author} +@vindex org-export-with-author +Toggle inclusion of author name into exported file +(@code{org-export-with-author}). + +@item @code{broken-links} +@vindex org-export-with-broken-links +Toggles if Org should continue exporting upon finding a broken +internal link. When set to @code{mark}, Org clearly marks the problem +link in the output (@code{org-export-with-broken-links}). + +@item @code{c} +@vindex org-export-with-clocks +Toggle inclusion of @samp{CLOCK} keywords (@code{org-export-with-clocks}). + +@item @code{creator} +@vindex org-export-with-creator +Toggle inclusion of creator information in the exported file +(@code{org-export-with-creator}). + +@item @code{d} +@vindex org-export-with-drawers +Toggles inclusion of drawers, or list of drawers to include, or list +of drawers to exclude (@code{org-export-with-drawers}). + +@item @code{date} +@vindex org-export-with-date +Toggle inclusion of a date into exported file +(@code{org-export-with-date}). + +@item @code{e} +@vindex org-export-with-entities +Toggle inclusion of entities (@code{org-export-with-entities}). + +@item @code{email} +@vindex org-export-with-email +Toggle inclusion of the author's e-mail into exported file +(@code{org-export-with-email}). + +@item @code{f} +@vindex org-export-with-footnotes +Toggle the inclusion of footnotes (@code{org-export-with-footnotes}). + +@item @code{H} +@vindex org-export-headline-levels +Set the number of headline levels for export +(@code{org-export-headline-levels}). Below that level, headlines are +treated differently. In most back-ends, they become list items. + +@item @code{inline} +@vindex org-export-with-inlinetasks +Toggle inclusion of inlinetasks (@code{org-export-with-inlinetasks}). + +@item @code{num} +@vindex org-export-with-section-numbers +@cindex @samp{UNNUMBERED}, property +Toggle section-numbers (@code{org-export-with-section-numbers}). When +set to number N, Org numbers only those headlines at level N or +above. Set @samp{UNNUMBERED} property to non-@code{nil} to disable numbering +of heading and subheadings entirely. Moreover, when the value is +@samp{notoc} the headline, and all its children, do not appear in the +table of contents either (see @ref{Table of Contents}). + +@item @code{p} +@vindex org-export-with-planning +Toggle export of planning information (@code{org-export-with-planning}). +``Planning information'' comes from lines located right after the +headline and contain any combination of these cookies: @samp{SCHEDULED}, +@samp{DEADLINE}, or @samp{CLOSED}. + +@item @code{pri} +@vindex org-export-with-priority +Toggle inclusion of priority cookies +(@code{org-export-with-priority}). + +@item @code{prop} +@vindex org-export-with-properties +Toggle inclusion of property drawers, or list the properties to +include (@code{org-export-with-properties}). + +@item @code{stat} +@vindex org-export-with-statistics-cookies +Toggle inclusion of statistics cookies +(@code{org-export-with-statistics-cookies}). + +@item @code{tags} +@vindex org-export-with-tags +Toggle inclusion of tags, may also be @code{not-in-toc} +(@code{org-export-with-tags}). + +@item @code{tasks} +@vindex org-export-with-tasks +Toggle inclusion of tasks (TODO items); or @code{nil} to remove all +tasks; or @code{todo} to remove done tasks; or list the keywords to keep +(@code{org-export-with-tasks}). + +@item @code{tex} +@vindex org-export-with-latex +@code{nil} does not export; @code{t} exports; @code{verbatim} keeps everything in +verbatim (@code{org-export-with-latex}). + +@item @code{timestamp} +@vindex org-export-time-stamp-file +Toggle inclusion of the creation time in the exported file +(@code{org-export-time-stamp-file}). + +@item @code{title} +@vindex org-export-with-title +Toggle inclusion of title (@code{org-export-with-title}). + +@item @code{toc} +@vindex org-export-with-toc +Toggle inclusion of the table of contents, or set the level limit +(@code{org-export-with-toc}). + +@item @code{todo} +@vindex org-export-with-todo-keywords +Toggle inclusion of TODO keywords into exported text +(@code{org-export-with-todo-keywords}). + +@item @code{|} +@vindex org-export-with-tables +Toggle inclusion of tables (@code{org-export-with-tables}). +@end table + +When exporting sub-trees, special node properties can override the +above keywords. These properties have an @samp{EXPORT_} prefix. For +example, @samp{DATE} becomes, @samp{EXPORT_DATE} when used for a specific +sub-tree. Except for @samp{SETUPFILE}, all other keywords listed above +have an @samp{EXPORT_} equivalent. + +@cindex @samp{BIND}, keyword +@vindex org-export-allow-bind-keywords +If @code{org-export-allow-bind-keywords} is non-@code{nil}, Emacs variables can +become buffer-local during export by using the @samp{BIND} keyword. Its +syntax is @samp{#+BIND: variable value}. This is particularly useful for +in-buffer settings that cannot be changed using keywords. + +@node Table of Contents +@section Table of Contents + +@cindex table of contents +@cindex list of tables +@cindex list of listings + +@cindex @samp{toc}, in @samp{OPTIONS} keyword +@vindex org-export-with-toc +The table of contents includes all headlines in the document. Its +depth is therefore the same as the headline levels in the file. If +you need to use a different depth, or turn it off entirely, set the +@code{org-export-with-toc} variable accordingly. You can achieve the same +on a per file basis, using the following @samp{toc} item in @samp{OPTIONS} +keyword: + +@example +#+OPTIONS: toc:2 (only include two levels in TOC) +#+OPTIONS: toc:nil (no default TOC at all) +@end example + +@cindex excluding entries from table of contents +@cindex table of contents, exclude entries +Org includes both numbered and unnumbered headlines in the table of +contents@footnote{At the moment, some export back-ends do not obey this +specification. For example, @LaTeX{} export excludes every unnumbered +headline from the table of contents.}. If you need to exclude an unnumbered headline, +along with all its children, set the @samp{UNNUMBERED} property to @samp{notoc} +value. + +@example +* Subtree not numbered, not in table of contents either + :PROPERTIES: + :UNNUMBERED: notoc + :END: +@end example + +@cindex @samp{TOC}, keyword +Org normally inserts the table of contents directly before the first +headline of the file. To move the table of contents to a different +location, first turn off the default with @code{org-export-with-toc} +variable or with @samp{#+OPTIONS: toc:nil}. Then insert @samp{#+TOC: headlines +N} at the desired location(s). + +@example +#+OPTIONS: toc:nil +... +#+TOC: headlines 2 +@end example + +To adjust the table of contents depth for a specific section of the +Org document, append an additional @samp{local} parameter. This parameter +becomes a relative depth for the current level. The following example +inserts a local table of contents, with direct children only. + +@example +* Section +#+TOC: headlines 1 local +@end example + +Note that for this feature to work properly in @LaTeX{} export, the Org +file requires the inclusion of the titletoc package. Because of +compatibility issues, titletoc has to be loaded @emph{before} hyperref. +Customize the @code{org-latex-default-packages-alist} variable. + +The following example inserts a table of contents that links to the +children of the specified target. + +@example +* Target + :PROPERTIES: + :CUSTOM_ID: TargetSection + :END: +** Heading A +** Heading B +* Another section +#+TOC: headlines 1 :target #TargetSection +@end example + +The @samp{:target} attribute is supported in HTML, Markdown, ODT, and ASCII export. + +Use the @samp{TOC} keyword to generate list of tables---respectively, all +listings---with captions. + +@example +#+TOC: listings +#+TOC: tables +@end example + +@cindex @samp{ALT_TITLE}, property +Normally Org uses the headline for its entry in the table of contents. +But with @samp{ALT_TITLE} property, a different entry can be specified for +the table of contents. + +@node Include Files +@section Include Files + +@cindex include files, during export +@cindex export, include files +@cindex @samp{INCLUDE}, keyword + +During export, you can include the content of another file. For +example, to include your @samp{.emacs} file, you could use: + +@example +#+INCLUDE: "~/.emacs" src emacs-lisp +@end example + + +@noindent +The first parameter is the file name to include. The optional second +parameter specifies the block type: @samp{example}, @samp{export} or @samp{src}. The +optional third parameter specifies the source code language to use for +formatting the contents. This is relevant to both @samp{export} and @samp{src} +block types. + +If an included file is specified as having a markup language, Org +neither checks for valid syntax nor changes the contents in any way. +For example and source blocks, Org code-escapes the contents before +inclusion. + +@cindex @samp{minlevel}, include +If an included file is not specified as having any markup language, +Org assumes it be in Org format and proceeds as usual with a few +exceptions. Org makes the footnote labels (see @ref{Creating Footnotes}) +in the included file local to that file. The contents of the included +file belong to the same structure---headline, item---containing the +@samp{INCLUDE} keyword. In particular, headlines within the file become +children of the current section. That behavior can be changed by +providing an additional keyword parameter, @samp{:minlevel}. It shifts the +headlines in the included file to become the lowest level. For +example, this syntax makes the included file a sibling of the current +top-level headline: + +@example +#+INCLUDE: "~/my-book/chapter2.org" :minlevel 1 +@end example + + +@cindex @samp{lines}, include +Inclusion of only portions of files are specified using ranges +parameter with @samp{:lines} keyword. The line at the upper end of the +range will not be included. The start and/or the end of the range may +be omitted to use the obvious defaults. + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{#+INCLUDE: "~/.emacs" :lines "5-10"} +@tab Include lines 5 to 10, 10 excluded +@item @samp{#+INCLUDE: "~/.emacs" :lines "-10"} +@tab Include lines 1 to 10, 10 excluded +@item @samp{#+INCLUDE: "~/.emacs" :lines "10-"} +@tab Include lines from 10 to EOF +@end multitable + +Inclusions may specify a file-link to extract an object matched by +@code{org-link-search}@footnote{Note that @code{org-link-search-must-match-exact-headline} is +locally bound to non-@code{nil}. Therefore, @code{org-link-search} only matches +headlines and named elements.} (see @ref{Search Options}). The +ranges for @samp{:lines} keyword are relative to the requested element. +Therefore, + +@example +#+INCLUDE: "./paper.org::*conclusion" :lines 1-20 +@end example + + +@noindent +includes the first 20 lines of the headline named @samp{conclusion}. + +@cindex @samp{only-contents}, include +To extract only the contents of the matched object, set +@samp{:only-contents} property to non-@code{nil}. This omits any planning lines +or property drawers. For example, to include the body of the heading +with the custom ID @samp{theory}, you can use + +@example +#+INCLUDE: "./paper.org::#theory" :only-contents t +@end example + + +The following command allows navigating to the included document: + +@table @asis +@item @kbd{C-c '} (@code{org-edit~special}) +@kindex C-c ' +@findex org-edit-special + +Visit the included file at point. +@end table + +@node Macro Replacement +@section Macro Replacement + +@cindex macro replacement, during export +@cindex @samp{MACRO}, keyword + +@vindex org-export-global-macros +Macros replace text snippets during export. Macros are defined +globally in @code{org-export-global-macros}, or document-wise with the +following syntax: + +@example +#+MACRO: name replacement text; $1, $2 are arguments +@end example + + +@noindent +which can be referenced using @samp{@{@{@{name(arg1, arg2)@}@}@}}@footnote{Since commas separate the arguments, commas within arguments +have to be escaped with the backslash character. So only those +backslash characters before a comma need escaping with another +backslash character.}. For +example + +@example +#+MACRO: poem Rose is $1, violet's $2. Life's ordered: Org assists you. +@{@{@{poem(red,blue)@}@}@} +@end example + +@noindent +becomes + +@example +Rose is red, violet's blue. Life's ordered: Org assists you. +@end example + + +As a special case, Org parses any replacement text starting with +@samp{(eval} as an Emacs Lisp expression and evaluates it accordingly. +Within such templates, arguments become strings. Thus, the following +macro + +@example +#+MACRO: gnustamp (eval (concat "GNU/" (capitalize $1))) +@end example + + +@noindent +turns @samp{@{@{@{gnustamp(linux)@}@}@}} into @samp{GNU/Linux} during export. + +Org recognizes macro references in following Org markup areas: +paragraphs, headlines, verse blocks, tables cells and lists. Org also +recognizes macro references in keywords, such as @samp{CAPTION}, @samp{TITLE}, +@samp{AUTHOR}, @samp{DATE}, and for some back-end specific export options. + +Org comes with following pre-defined macros: + +@table @asis +@item @samp{@{@{@{keyword(NAME)@}@}@}} +@itemx @samp{@{@{@{title@}@}@}} +@itemx @samp{@{@{@{author@}@}@}} +@itemx @samp{@{@{@{email@}@}@}} +@cindex @samp{keyword}, macro +@cindex @samp{title}, macro +@cindex @samp{author}, macro +@cindex @samp{email}, macro +The @samp{keyword} macro collects all values from @var{NAME} +keywords throughout the buffer, separated with white space. +@samp{title}, @samp{author} and @samp{email} macros are shortcuts for, +respectively, @samp{@{@{@{keyword(TITLE)@}@}@}}, @samp{@{@{@{keyword(AUTHOR)@}@}@}} and +@samp{@{@{@{keyword(EMAIL)@}@}@}}. + +@item @samp{@{@{@{date@}@}@}} +@itemx @samp{@{@{@{date(FORMAT)@}@}@}} +@cindex @samp{date}, macro +This macro refers to the @samp{DATE} keyword. @var{FORMAT} is an +optional argument to the @samp{date} macro that is used only if @samp{DATE} is +a single timestamp. @var{FORMAT} should be a format string +understood by @code{format-time-string}. + +@item @samp{@{@{@{time(FORMAT)@}@}@}} +@itemx @samp{@{@{@{modification-time(FORMAT, VC)@}@}@}} +@cindex @samp{time}, macro +@cindex @samp{modification-time}, macro +These macros refer to the document's date and time of export and +date and time of modification. @var{FORMAT} is a string +understood by @code{format-time-string}. If the second argument to the +@code{modification-time} macro is non-@code{nil}, Org uses @samp{vc.el} to retrieve +the document's modification time from the version control system. +Otherwise Org reads the file attributes. + +@item @samp{@{@{@{input-file@}@}@}} +@cindex @samp{input-file}, macro +This macro refers to the filename of the exported file. + +@item @samp{@{@{@{property(PROPERTY-NAME)@}@}@}} +@itemx @samp{@{@{@{property(PROPERTY-NAME, SEARCH OPTION)@}@}@}} +@cindex @samp{property}, macro +This macro returns the value of property @var{PROPERTY-NAME} in +the current entry. If @var{SEARCH-OPTION} (see @ref{Search Options}) refers to a remote entry, use it instead. + +@item @samp{@{@{@{n@}@}@}} +@itemx @samp{@{@{@{n(NAME)@}@}@}} +@itemx @samp{@{@{@{n(NAME, ACTION)@}@}@}} +@cindex @samp{n}, macro +@cindex counter, macro +This macro implements custom counters by returning the number of +times the macro has been expanded so far while exporting the buffer. +You can create more than one counter using different @var{NAME} +values. If @var{ACTION} is @samp{-}, previous value of the counter +is held, i.e., the specified counter is not incremented. If the +value is a number, the specified counter is set to that value. If +it is any other non-empty string, the specified counter is reset +to 1. You may leave @var{NAME} empty to reset the default +counter. +@end table + +@cindex @samp{results}, macro +Moreover, inline source blocks (see @ref{Structure of Code Blocks}) use the +special @samp{results} macro to mark their output. As such, you are +advised against re-defining it, unless you know what you are doing. + +@vindex org-hide-macro-markers +The surrounding brackets can be made invisible by setting +@code{org-hide-macro-markers} to a non-@code{nil} value. + +Org expands macros at the very beginning of the export process. + +@node Comment Lines +@section Comment Lines + +@cindex exporting, not + +@cindex comment lines +Lines starting with zero or more whitespace characters followed by one +@samp{#} and a whitespace are treated as comments and, as such, are not +exported. + +@cindex @samp{BEGIN_COMMENT} +@cindex comment block +Likewise, regions surrounded by @samp{#+BEGIN_COMMENT} @dots{} @samp{#+END_COMMENT} +are not exported. + +@cindex comment trees +Finally, a @samp{COMMENT} keyword at the beginning of an entry, but after +any other keyword or priority cookie, comments out the entire subtree. +In this case, the subtree is not exported and no code block within it +is executed either@footnote{For a less drastic behavior, consider using a select tag (see +@ref{Export Settings}) instead.}. The command below helps changing the +comment status of a headline. + +@table @asis +@item @kbd{C-c ;} (@code{org-toggle-comment}) +@kindex C-c ; +@findex org-toggle-comment + +Toggle the @samp{COMMENT} keyword at the beginning of an entry. +@end table + +@node ASCII/Latin-1/UTF-8 export +@section ASCII/Latin-1/UTF-8 export + +@cindex ASCII export +@cindex Latin-1 export +@cindex UTF-8 export + +ASCII export produces an output file containing only plain ASCII +characters. This is the simplest and most direct text output. It +does not contain any Org markup. Latin-1 and UTF-8 export use +additional characters and symbols available in these encoding +standards. All three of these export formats offer the most basic of +text output for maximum portability. + +@vindex org-ascii-text-width +On export, Org fills and justifies text according to the text width +set in @code{org-ascii-text-width}. + +@vindex org-ascii-links-to-notes +Org exports links using a footnote-like style where the descriptive +part is in the text and the link is in a note before the next heading. +See the variable @code{org-ascii-links-to-notes} for details. + +@anchor{ASCII export commands} +@subheading ASCII export commands + +@table @asis +@item @kbd{C-c C-e t a} (@code{org-ascii-export-to-ascii}) +@itemx @kbd{C-c C-e t l} +@itemx @kbd{C-c C-e t u} +@kindex C-c C-e t a +@kindex C-c C-e t l +@kindex C-c C-e t u +@findex org-ascii-export-to-ascii + +Export as an ASCII file with a @samp{.txt} extension. For @samp{myfile.org}, +Org exports to @samp{myfile.txt}, overwriting without warning. For +@samp{myfile.txt}, Org exports to @samp{myfile.txt.txt} in order to prevent +data loss. + +@item @kbd{C-c C-e t A} (@code{org-ascii-export-to-ascii}) +@itemx @kbd{C-c C-e t L} +@itemx @kbd{C-c C-e t U} +@kindex C-c C-e t A +@kindex C-c C-e t L +@kindex C-c C-e t U +@findex org-ascii-export-as-ascii + +Export to a temporary buffer. Does not create a file. +@end table + +@anchor{ASCII specific export settings} +@subheading ASCII specific export settings + +The ASCII export back-end has one extra keyword for customizing ASCII +output. Setting this keyword works similar to the general options +(see @ref{Export Settings}). + +@table @asis +@item @samp{SUBTITLE} +@cindex @samp{SUBTITLE}, keyword +The document subtitle. For long subtitles, use multiple +@samp{#+SUBTITLE} lines in the Org file. Org prints them on one +continuous line, wrapping into multiple lines if necessary. +@end table + +@anchor{Header and sectioning structure} +@subheading Header and sectioning structure + +Org converts the first three outline levels into headlines for ASCII +export. The remaining levels are turned into lists. To change this +cut-off point where levels become lists, see @ref{Export Settings}. + +@anchor{Quoting ASCII text} +@subheading Quoting ASCII text + +To insert text within the Org file by the ASCII back-end, use one the +following constructs, inline, keyword, or export block: + +@cindex @samp{ASCII}, keyword +@cindex @samp{BEGIN_EXPORT ascii} +@example +Inline text @@@@ascii:and additional text@@@@ within a paragraph. + +#+ASCII: Some text + +#+BEGIN_EXPORT ascii +Org exports text in this block only when using ASCII back-end. +#+END_EXPORT +@end example + +@anchor{ASCII specific attributes} +@subheading ASCII specific attributes + +@cindex @samp{ATTR_ASCII}, keyword +@cindex horizontal rules, in ASCII export + +ASCII back-end recognizes only one attribute, @samp{:width}, which +specifies the width of a horizontal rule in number of characters. The +keyword and syntax for specifying widths is: + +@example +#+ATTR_ASCII: :width 10 +----- +@end example + +@anchor{ASCII special blocks} +@subheading ASCII special blocks + +@cindex special blocks, in ASCII export +@cindex @samp{BEGIN_JUSTIFYLEFT} +@cindex @samp{BEGIN_JUSTIFYRIGHT} + +Besides @samp{#+BEGIN_CENTER} blocks (see @ref{Paragraphs}), ASCII back-end has +these two left and right justification blocks: + +@example +#+BEGIN_JUSTIFYLEFT +It's just a jump to the left... +#+END_JUSTIFYLEFT + +#+BEGIN_JUSTIFYRIGHT +...and then a step to the right. +#+END_JUSTIFYRIGHT +@end example + +@node Beamer Export +@section Beamer Export + +@cindex Beamer export + +Org uses Beamer export to convert an Org file tree structure into +high-quality interactive slides for presentations. Beamer is a @LaTeX{} +document class for creating presentations in PDF, HTML, and other +popular display formats. + +@menu +* Beamer export commands:: For creating Beamer documents. +* Beamer specific export settings:: For customizing Beamer export. +* Frames and Blocks in Beamer:: For composing Beamer slides. +* Beamer specific syntax:: For using in Org documents. +* Editing support:: Editing support. +* A Beamer example:: A complete presentation. +@end menu + +@node Beamer export commands +@subsection Beamer export commands + +@table @asis +@item @kbd{C-c C-e l b} (@code{org-beamer-export-to-latex}) +@kindex C-c C-e l b +@findex org-beamer-export-to-latex + +Export as @LaTeX{} file with a @samp{.tex} extension. For @samp{myfile.org}, Org +exports to @samp{myfile.tex}, overwriting without warning. + +@item @kbd{C-c C-e l B} (@code{org-beamer-export-as-latex}) +@kindex C-c C-e l B +@findex org-beamer-export-as-latex + +Export to a temporary buffer. Does not create a file. + +@item @kbd{C-c C-e l P} (@code{org-beamer-export-to-pdf}) +@kindex C-c C-e l P +@findex org-beamer-export-to-pdf + +Export as @LaTeX{} file and then convert it to PDF format. + +@item @kbd{C-c C-e l O} +@kindex C-c C-e l O + +Export as @LaTeX{} file, convert it to PDF format, and then open the +PDF file. +@end table + +@node Beamer specific export settings +@subsection Beamer specific export settings + +Beamer export back-end has several additional keywords for customizing +Beamer output. These keywords work similar to the general options +settings (see @ref{Export Settings}). + +@table @asis +@item @samp{BEAMER_THEME} +@cindex @samp{BEAMER_THEME}, keyword +@vindex org-beamer-theme +The Beamer layout theme (@code{org-beamer-theme}). Use square brackets +for options. For example: + +@example +#+BEAMER_THEME: Rochester [height=20pt] +@end example + +@item @samp{BEAMER_FONT_THEME} +@cindex @samp{BEAMER_FONT_THEME}, keyword +The Beamer font theme. + +@item @samp{BEAMER_INNER_THEME} +@cindex @samp{BEAMER_INNER_THEME}, keyword +The Beamer inner theme. + +@item @samp{BEAMER_OUTER_THEME} +@cindex @samp{BEAMER_OUTER_THEME}, keyword +The Beamer outer theme. + +@item @samp{BEAMER_HEADER} +@cindex @samp{BEAMER_HEADER}, keyword +Arbitrary lines inserted in the preamble, just before the @samp{hyperref} +settings. + +@item @samp{DESCRIPTION} +@cindex @samp{DESCRIPTION}, keyword +The document description. For long descriptions, use multiple +@samp{DESCRIPTION} keywords. By default, @samp{hyperref} inserts +@samp{DESCRIPTION} as metadata. Use @code{org-latex-hyperref-template} to +configure document metadata. Use @code{org-latex-title-command} to +configure typesetting of description as part of front matter. + +@item @samp{KEYWORDS} +@cindex @samp{KEYWORDS}, keyword +The keywords for defining the contents of the document. Use +multiple @samp{KEYWORDS} lines if necessary. By default, @samp{hyperref} +inserts @samp{KEYWORDS} as metadata. Use @code{org-latex-hyperref-template} +to configure document metadata. Use @code{org-latex-title-command} to +configure typesetting of keywords as part of front matter. + +@item @samp{SUBTITLE} +@cindex @samp{SUBTITLE}, keyword +Document's subtitle. For typesetting, use +@code{org-beamer-subtitle-format} string. Use +@code{org-latex-hyperref-template} to configure document metadata. Use +@code{org-latex-title-command} to configure typesetting of subtitle as +part of front matter. +@end table + +@node Frames and Blocks in Beamer +@subsection Frames and Blocks in Beamer + +Org transforms heading levels into Beamer's sectioning elements, +frames and blocks. Any Org tree with a not-too-deep-level nesting +should in principle be exportable as a Beamer presentation. + +@itemize +@item +@vindex org-beamer-frame-level +Org headlines become Beamer frames when the heading level in Org is +equal to @code{org-beamer-frame-level} or @samp{H} value in a @samp{OPTIONS} line +(see @ref{Export Settings}). + +@cindex @samp{BEAMER_ENV}, property +Org overrides headlines to frames conversion for the current tree of +an Org file if it encounters the @samp{BEAMER_ENV} property set to +@samp{frame} or @samp{fullframe}. Org ignores whatever +@code{org-beamer-frame-level} happens to be for that headline level in +the Org tree. In Beamer terminology, a full frame is a frame +without its title. + +@item +Org exports a Beamer frame's objects as block environments. Org can +enforce wrapping in special block types when @samp{BEAMER_ENV} property +is set@footnote{If @samp{BEAMER_ENV} is set, Org export adds @samp{B_environment} tag +to make it visible. The tag serves as a visual aid and has no +semantic relevance.}. For valid values see +@code{org-beamer-environments-default}. To add more values, see +@code{org-beamer-environments-extra}. +@vindex org-beamer-environments-default +@vindex org-beamer-environments-extra + +@item +@cindex @samp{BEAMER_REF}, property +If @samp{BEAMER_ENV} is set to @samp{appendix}, Org exports the entry as an +appendix. When set to @samp{note}, Org exports the entry as a note +within the frame or between frames, depending on the entry's heading +level. When set to @samp{noteNH}, Org exports the entry as a note +without its title. When set to @samp{againframe}, Org exports the entry +with @samp{\againframe} command, which makes setting the @samp{BEAMER_REF} +property mandatory because @samp{\againframe} needs frame to resume. + +When @samp{ignoreheading} is set, Org export ignores the entry's headline +but not its content. This is useful for inserting content between +frames. It is also useful for properly closing a @samp{column} +environment. @@end itemize + +@cindex @samp{BEAMER_ACT}, property +@cindex @samp{BEAMER_OPT}, property +When @samp{BEAMER_ACT} is set for a headline, Org export translates that +headline as an overlay or action specification. When enclosed in +square brackets, Org export makes the overlay specification +a default. Use @samp{BEAMER_OPT} to set any options applicable to the +current Beamer frame or block. The Beamer export back-end wraps +with appropriate angular or square brackets. It also adds the +@samp{fragile} option for any code that may require a verbatim block. + +@cindex @samp{BEAMER_COL}, property +To create a column on the Beamer slide, use the @samp{BEAMER_COL} +property for its headline in the Org file. Set the value of +@samp{BEAMER_COL} to a decimal number representing the fraction of the +total text width. Beamer export uses this value to set the column's +width and fills the column with the contents of the Org entry. If +the Org entry has no specific environment defined, Beamer export +ignores the heading. If the Org entry has a defined environment, +Beamer export uses the heading as title. Behind the scenes, Beamer +export automatically handles @LaTeX{} column separations for contiguous +headlines. To manually adjust them for any unique configurations +needs, use the @samp{BEAMER_ENV} property. +@end itemize + +@node Beamer specific syntax +@subsection Beamer specific syntax + +Since Org's Beamer export back-end is an extension of the @LaTeX{} +back-end, it recognizes other @LaTeX{} specific syntax---for example, +@samp{#+LATEX:} or @samp{#+ATTR_LATEX:}. See @ref{@LaTeX{} Export}, for details. + +Beamer export wraps the table of contents generated with @samp{toc:t} +@samp{OPTION} keyword in a @samp{frame} environment. Beamer export does not +wrap the table of contents generated with @samp{TOC} keyword (see @ref{Table of Contents}). Use square brackets for specifying options. + +@example +#+TOC: headlines [currentsection] +@end example + + +Insert Beamer-specific code using the following constructs: + +@cindex @samp{BEAMER}, keyword +@cindex @samp{BEGIN_EXPORT beamer} +@example +#+BEAMER: \pause + +#+BEGIN_EXPORT beamer + Only Beamer export back-end exports this. +#+END_BEAMER + +Text @@@@beamer:some code@@@@ within a paragraph. +@end example + +Inline constructs, such as the last one above, are useful for adding +overlay specifications to objects with @code{bold}, @code{item}, @code{link}, +@code{radio-target} and @code{target} types. Enclose the value in angular +brackets and place the specification at the beginning of the object as +shown in this example: + +@example +A *@@@@beamer:<2->@@@@useful* feature +@end example + + +@cindex @samp{ATTR_BEAMER}, keyword +Beamer export recognizes the @samp{ATTR_BEAMER} keyword with the following +attributes from Beamer configurations: @samp{:environment} for changing +local Beamer environment, @samp{:overlay} for specifying Beamer overlays in +angular or square brackets, and @samp{:options} for inserting optional +arguments. + +@example +#+ATTR_BEAMER: :environment nonindentlist +- item 1, not indented +- item 2, not indented +- item 3, not indented +@end example + +@example +#+ATTR_BEAMER: :overlay <+-> +- item 1 +- item 2 +@end example + +@example +#+ATTR_BEAMER: :options [Lagrange] +Let $G$ be a finite group, and let $H$ be +a subgroup of $G$. Then the order of $H$ divides the order of $G$. +@end example + +@node Editing support +@subsection Editing support + +Org Beamer mode is a special minor mode for faster editing of Beamer +documents. + +@example +#+STARTUP: beamer +@end example + + +@table @asis +@item @kbd{C-c C-b} (@code{org-beamer-select-environment}) +@kindex C-c C-b +@findex org-beamer-select-environment + +Org Beamer mode provides this key for quicker selections in Beamer +normal environments, and for selecting the @samp{BEAMER_COL} property. +@end table + +@node A Beamer example +@subsection A Beamer example + +Here is an example of an Org document ready for Beamer export. + +@example +#+TITLE: Example Presentation +#+AUTHOR: Carsten Dominik +#+OPTIONS: H:2 toc:t num:t +#+LATEX_CLASS: beamer +#+LATEX_CLASS_OPTIONS: [presentation] +#+BEAMER_THEME: Madrid +#+COLUMNS: %45ITEM %10BEAMER_ENV(Env) %10BEAMER_ACT(Act) %4BEAMER_COL(Col) + +* This is the first structural section + +** Frame 1 +*** Thanks to Eric Fraga :B_block: + :PROPERTIES: + :BEAMER_COL: 0.48 + :BEAMER_ENV: block + :END: + for the first viable Beamer setup in Org +*** Thanks to everyone else :B_block: + :PROPERTIES: + :BEAMER_COL: 0.48 + :BEAMER_ACT: <2-> + :BEAMER_ENV: block + :END: + for contributing to the discussion +**** This will be formatted as a beamer note :B_note: + :PROPERTIES: + :BEAMER_env: note + :END: +** Frame 2 (where we will not use columns) +*** Request + Please test this stuff! +@end example + +@node HTML Export +@section HTML Export + +@cindex HTML export + +Org mode contains an HTML exporter with extensive HTML formatting +compatible with XHTML 1.0 strict standard. + +@menu +* HTML export commands:: Invoking HTML export. +* HTML specific export settings:: Settings for HTML export. +* HTML doctypes:: Exporting various (X)HTML flavors. +* HTML preamble and postamble:: Inserting preamble and postamble. +* Quoting HTML tags:: Using direct HTML in Org files. +* Headlines in HTML export:: Formatting headlines. +* Links in HTML export:: Inserting and formatting links. +* Tables in HTML export:: How to modify the formatting of tables. +* Images in HTML export:: How to insert figures into HTML output. +* Math formatting in HTML export:: Beautiful math also on the web. +* Text areas in HTML export:: An alternate way to show an example. +* CSS support:: Changing the appearance of the output. +* JavaScript support:: Info and folding in a web browser. +@end menu + +@node HTML export commands +@subsection HTML export commands + +@table @asis +@item @kbd{C-c C-e h h} (@code{org-html-export-to-html}) +@kindex C-c C-e h h +@kindex C-c C-e h o +@findex org-html-export-to-html + +Export as HTML file with a @samp{.html} extension. For @samp{myfile.org}, Org +exports to @samp{myfile.html}, overwriting without warning. @kbd{C-c C-e h o} exports to HTML and opens it in a web browser. + +@item @kbd{C-c C-e h H} (@code{org-html-export-as-html}) +@kindex C-c C-e h H +@findex org-html-export-as-html + +Exports to a temporary buffer. Does not create a file. +@end table + +@node HTML specific export settings +@subsection HTML specific export settings + +HTML export has a number of keywords, similar to the general options +settings described in @ref{Export Settings}. + +@table @asis +@item @samp{DESCRIPTION} +@cindex @samp{DESCRIPTION}, keyword +This is the document's description, which the HTML exporter inserts +it as a HTML meta tag in the HTML file. For long descriptions, use +multiple @samp{DESCRIPTION} lines. The exporter takes care of wrapping +the lines properly. + +The exporter includes a number of other meta tags, which can be customized +by modifying @code{org-html-meta-tags}. + +@item @samp{HTML_DOCTYPE} +@cindex @samp{HTML_DOCTYPE}, keyword +@vindex org-html-doctype +Specify the document type, for example: HTML5 (@code{org-html-doctype}). + +@item @samp{HTML_CONTAINER} +@cindex @samp{HTML_CONTAINER}, keyword +@vindex org-html-container-element +Specify the HTML container, such as @samp{div}, for wrapping sections and +elements (@code{org-html-container-element}). + +@item @samp{HTML_LINK_HOME} +@cindex @samp{HTML_LINK_HOME}, keyword +@vindex org-html-link-home +The URL for home link (@code{org-html-link-home}). + +@item @samp{HTML_LINK_UP} +@cindex @samp{HTML_LINK_UP}, keyword +@vindex org-html-link-up +The URL for the up link of exported HTML pages (@code{org-html-link-up}). + +@item @samp{HTML_MATHJAX} +@cindex @samp{HTML_MATHJAX}, keyword +@vindex org-html-mathjax-options +Options for MathJax (@code{org-html-mathjax-options}). MathJax is used +to typeset @LaTeX{} math in HTML documents. See @ref{Math formatting in HTML export}, for an example. + +@item @samp{HTML_HEAD} +@cindex @samp{HTML_HEAD}, keyword +@vindex org-html-head +Arbitrary lines for appending to the HTML document's head +(@code{org-html-head}). + +@item @samp{HTML_HEAD_EXTRA} +@cindex @samp{HTML_HEAD_EXTRA}, keyword +@vindex org-html-head-extra +More arbitrary lines for appending to the HTML document's head +(@code{org-html-head-extra}). + +@item @samp{KEYWORDS} +@cindex @samp{KEYWORDS}, keyword +Keywords to describe the document's content. HTML exporter inserts +these keywords as HTML meta tags. For long keywords, use multiple +@samp{KEYWORDS} lines. + +@item @samp{LATEX_HEADER} +@cindex @samp{LATEX_HEADER}, keyword +Arbitrary lines for appending to the preamble; HTML exporter appends +when transcoding @LaTeX{} fragments to images (see @ref{Math formatting in HTML export}). + +@item @samp{SUBTITLE} +@cindex @samp{SUBTITLE}, keyword +The document's subtitle. HTML exporter formats subtitle if document +type is @samp{HTML5} and the CSS has a @samp{subtitle} class. +@end table + +Some of these keywords are explained in more detail in the following +sections of the manual. + +@node HTML doctypes +@subsection HTML doctypes + +Org can export to various (X)HTML flavors. + +@vindex org-html-doctype +@vindex org-html-doctype-alist +Set the @code{org-html-doctype} variable for different (X)HTML variants. +Depending on the variant, the HTML exporter adjusts the syntax of HTML +conversion accordingly. Org includes the following ready-made +variants: + +@itemize +@item +@code{"html4-strict"} +@item +@code{"html4-transitional"} +@item +@code{"html4-frameset"} +@item +@code{"xhtml-strict"} +@item +@code{"xhtml-transitional"} +@item +@code{"xhtml-frameset"} +@item +@code{"xhtml-11"} +@item +@code{"html5"} +@item +@code{"xhtml5"} +@end itemize + +@noindent +See the variable @code{org-html-doctype-alist} for details. The default is +@code{"xhtml-strict"}. + +@vindex org-html-html5-fancy +@cindex @samp{HTML5}, export new elements +Org's HTML exporter does not by default enable new block elements +introduced with the HTML5 standard. To enable them, set +@code{org-html-html5-fancy} to non-@code{nil}. Or use an @samp{OPTIONS} line in the +file to set @samp{html5-fancy}. + +HTML5 documents can now have arbitrary @samp{#+BEGIN} @dots{} @samp{#+END} blocks. +For example: + +@example +#+BEGIN_aside + Lorem ipsum +#+END_aside +@end example + +@noindent +exports to: + +@example + +@end example + +@noindent +while this: + +@example +#+ATTR_HTML: :controls controls :width 350 +#+BEGIN_video +#+HTML: +#+HTML: +Your browser does not support the video tag. +#+END_video +@end example + +@noindent +exports to: + +@example + +@end example + +@vindex org-html-html5-elements +When special blocks do not have a corresponding HTML5 element, the +HTML exporter reverts to standard translation (see +@code{org-html-html5-elements}). For example, @samp{#+BEGIN_lederhosen} exports +to @code{
}. + +Special blocks cannot have headlines. For the HTML exporter to wrap +the headline and its contents in @code{
} or @code{
} tags, set +the @samp{HTML_CONTAINER} property for the headline. + +@node HTML preamble and postamble +@subsection HTML preamble and postamble + +@vindex org-html-preamble +@vindex org-html-postamble +@vindex org-html-preamble-format +@vindex org-html-postamble-format +@vindex org-html-validation-link +@vindex org-export-creator-string +@vindex org-export-time-stamp-file + +The HTML exporter has delineations for preamble and postamble. The +default value for @code{org-html-preamble} is @code{t}, which makes the HTML +exporter insert the preamble. See the variable +@code{org-html-preamble-format} for the format string. + +Set @code{org-html-preamble} to a string to override the default format +string. If the string is a function, the HTML exporter expects the +function to return a string upon execution. The HTML exporter inserts +this string in the preamble. The HTML exporter does not insert +a preamble if @code{org-html-preamble} is set @code{nil}. + +The default value for @code{org-html-postamble} is @code{auto}, which makes the +HTML exporter build a postamble from looking up author's name, email +address, creator's name, and date. Set @code{org-html-postamble} to @code{t} to +insert the postamble in the format specified in the +@code{org-html-postamble-format} variable. The HTML exporter does not +insert a postamble if @code{org-html-postamble} is set to @code{nil}. + +@node Quoting HTML tags +@subsection Quoting HTML tags + +The HTML export back-end transforms @samp{<} and @samp{>} to @samp{<} and @samp{>}. +To include raw HTML code in the Org file so the HTML export back-end +can insert that HTML code in the output, use this inline syntax: +@samp{@@@@html:...@@@@}. For example: + +@example +@@@@html:@@@@bold text@@@@html:@@@@ +@end example + + +@cindex @samp{HTML}, keyword +@cindex @samp{BEGIN_EXPORT html} +For larger raw HTML code blocks, use these HTML export code blocks: + +@example +#+HTML: Literal HTML code for export + +#+BEGIN_EXPORT html + All lines between these markers are exported literally +#+END_EXPORT +@end example + +@node Headlines in HTML export +@subsection Headlines in HTML export + +@cindex headlines, in HTML export + +Headlines are exported to @samp{

}, @samp{

}, etc. Each headline gets the +@samp{id} attribute from @samp{CUSTOM_ID} property, or a unique generated value, +see @ref{Internal Links}. + +@vindex org-html-self-link-headlines +When @code{org-html-self-link-headlines} is set to a non-@code{nil} value, the +text of the headlines is also wrapped in @samp{} tags. These tags have +a @samp{href} attribute making the headlines link to themselves. + +@node Links in HTML export +@subsection Links in HTML export + +@cindex links, in HTML export +@cindex internal links, in HTML export +@cindex external links, in HTML export + +The HTML export back-end transforms Org's internal links (see +@ref{Internal Links}) to equivalent HTML links in the output. The back-end +similarly handles Org's automatic links created by radio targets (see +@ref{Radio Targets}) similarly. For Org links to external files, the +back-end transforms the links to @emph{relative} paths. + +@vindex org-html-link-org-files-as-html +For Org links to other @samp{.org} files, the back-end automatically +changes the file extension to @samp{.html} and makes file paths relative. +If the @samp{.org} files have an equivalent @samp{.html} version at the same +location, then the converted links should work without any further +manual intervention. However, to disable this automatic path +translation, set @code{org-html-link-org-files-as-html} to @code{nil}. When +disabled, the HTML export back-end substitutes the ID-based links in +the HTML output. For more about linking files when publishing to +a directory, see @ref{Publishing links}. + +Org files can also have special directives to the HTML export +back-end. For example, by using @samp{#+ATTR_HTML} lines to specify new +format attributes to @code{} or @code{} tags. This example shows +changing the link's title and style: + +@cindex @samp{ATTR_HTML}, keyword +@example +#+ATTR_HTML: :title The Org mode homepage :style color:red; +[[https://orgmode.org]] +@end example + +@node Tables in HTML export +@subsection Tables in HTML export + +@cindex tables, in HTML +@vindex org-export-html-table-tag + +The HTML export back-end uses @code{org-html-table-default-attributes} when +exporting Org tables to HTML@. By default, the exporter does not draw +frames and cell borders. To change for this for a table, use the +following lines before the table in the Org file: + +@cindex @samp{CAPTION}, keyword +@cindex @samp{ATTR_HTML}, keyword +@example +#+CAPTION: This is a table with lines around and between cells +#+ATTR_HTML: :border 2 :rules all :frame border +@end example + +The HTML export back-end preserves column groupings in Org tables (see +@ref{Column Groups}) when exporting to HTML@. + +Additional options for customizing tables for HTML export. + +@table @asis +@item @code{org-html-table-align-individual-fields} +@vindex org-html-table-align-individual-fields +Non-@code{nil} attaches style attributes for alignment to each table +field. + +@item @code{org-html-table-caption-above} +@vindex org-html-table-caption-above +Non-@code{nil} places caption string at the beginning of the table. + +@item @code{org-html-table-data-tags} +@vindex org-html-table-data-tags +Opening and ending tags for table data fields. + +@item @code{org-html-table-default-attributes} +@vindex org-html-table-default-attributes +Default attributes and values for table tags. + +@item @code{org-html-table-header-tags} +@vindex org-html-table-header-tags +Opening and ending tags for table's header fields. + +@item @code{org-html-table-row-tags} +@vindex org-html-table-row-tags +Opening and ending tags for table rows. + +@item @code{org-html-table-use-header-tags-for-first-column} +@vindex org-html-table-use-header-tags-for-first-column +Non-@code{nil} formats column one in tables with header tags. +@end table + +@node Images in HTML export +@subsection Images in HTML export + +@cindex images, inline in HTML +@cindex inlining images in HTML + +The HTML export back-end has features to convert Org image links to +HTML inline images and HTML clickable image links. + +@vindex org-html-inline-images +When the link in the Org file has no description, the HTML export +back-end by default in-lines that image. For example: +@samp{[[file:myimg.jpg]]} is in-lined, while @samp{[[file:myimg.jpg][the image]]} links to the text, +@samp{the image}. For more details, see the variable +@code{org-html-inline-images}. + +On the other hand, if the description part of the Org link is itself +another link, such as @samp{file:} or @samp{http:} URL pointing to an image, the +HTML export back-end in-lines this image and links to the main image. +This Org syntax enables the back-end to link low-resolution thumbnail +to the high-resolution version of the image, as shown in this example: + +@example +[[file:highres.jpg][file:thumb.jpg]] +@end example + + +To change attributes of in-lined images, use @samp{#+ATTR_HTML} lines in +the Org file. This example shows realignment to right, and adds @code{alt} +and @code{title} attributes in support of text viewers and modern web +accessibility standards. + +@cindex @samp{CAPTION}, keyword +@cindex @samp{ATTR_HTML}, keyword +@example +#+CAPTION: A black cat stalking a spider +#+ATTR_HTML: :alt cat/spider image :title Action! :align right +[[./img/a.jpg]] +@end example + +The HTML export back-end copies the @samp{http} links from the Org file +as-is. + +@node Math formatting in HTML export +@subsection Math formatting in HTML export + +@cindex MathJax +@cindex dvipng +@cindex dvisvgm +@cindex ImageMagick + +@vindex org-html-mathjax-options~ +@LaTeX{} math snippets (see @ref{@LaTeX{} fragments}) can be displayed in two +different ways on HTML pages. The default is to use the @uref{https://www.mathjax.org, MathJax}, +which should work out of the box with Org@footnote{By default Org loads MathJax from @uref{https://cdnjs.com, cdnjs.com} as recommended by +@uref{https://www.mathjax.org, MathJax}.}@footnote{Please note that exported formulas are part of an HTML +document, and that signs such as @samp{<}, @samp{>}, or @samp{&} have special +meanings. See @uref{http://docs.mathjax.org/en/latest/tex.html#tex-and-latex-in-html-documents, MathJax @TeX{} and @LaTeX{} support}.}. Some MathJax +display options can be configured via @code{org-html-mathjax-options}, or +in the buffer. For example, with the following settings, + +@example +#+HTML_MATHJAX: align: left indent: 5em tagside: left font: Neo-Euler +#+HTML_MATHJAX: cancel.js noErrors.js +@end example + +@noindent +equation labels are displayed on the left margin and equations are +five em from the left margin. In addition, it loads the two MathJax +extensions @samp{cancel.js} and @samp{noErrors.js}@footnote{See @uref{http://docs.mathjax.org/en/latest/tex.html#tex-extensions, @TeX{} and @LaTeX{} extensions} in the @uref{http://docs.mathjax.org, MathJax manual} to learn +about extensions.}. + +@vindex org-html-mathjax-template +See the docstring of @code{org-html-mathjax-options} for all supported +variables. The MathJax template can be configure via +@code{org-html-mathjax-template}. + +If you prefer, you can also request that @LaTeX{} fragments are processed +into small images that will be inserted into the browser page. Before +the availability of MathJax, this was the default method for Org +files. This method requires that the dvipng program, dvisvgm or +ImageMagick suite is available on your system. You can still get this +processing with + +@example +#+OPTIONS: tex:dvipng +@end example + + +@example +#+OPTIONS: tex:dvisvgm +@end example + + +@noindent +or + +@example +#+OPTIONS: tex:imagemagick +@end example + +@node Text areas in HTML export +@subsection Text areas in HTML export + +@cindex text areas, in HTML +Before Org mode's Babel, one popular approach to publishing code in +HTML was by using @samp{:textarea}. The advantage of this approach was +that copying and pasting was built into browsers with simple +JavaScript commands. Even editing before pasting was made simple. + +The HTML export back-end can create such text areas. It requires an +@samp{#+ATTR_HTML} line as shown in the example below with the @samp{:textarea} +option. This must be followed by either an example or a source code +block. Other Org block types do not honor the @samp{:textarea} option. + +By default, the HTML export back-end creates a text area 80 characters +wide and height just enough to fit the content. Override these +defaults with @samp{:width} and @samp{:height} options on the @samp{#+ATTR_HTML} +line. + +@example +#+ATTR_HTML: :textarea t :width 40 +#+BEGIN_EXAMPLE + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) +#+END_EXAMPLE +@end example + +@node CSS support +@subsection CSS support + +@cindex CSS, for HTML export +@cindex HTML export, CSS + +@vindex org-export-html-todo-kwd-class-prefix +@vindex org-export-html-tag-class-prefix +You can modify the CSS style definitions for the exported file. The +HTML exporter assigns the following special CSS classes@footnote{If the classes on TODO keywords and tags lead to conflicts, +use the variables @code{org-html-todo-kwd-class-prefix} and +@code{org-html-tag-class-prefix} to make them unique.} to +appropriate parts of the document---your style specifications may +change these, in addition to any of the standard classes like for +headlines, tables, etc. + +@multitable {aaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{p.author} +@tab author information, including email +@item @code{p.date} +@tab publishing date +@item @code{p.creator} +@tab creator info, about org mode version +@item @code{.title} +@tab document title +@item @code{.subtitle} +@tab document subtitle +@item @code{.todo} +@tab TODO keywords, all not-done states +@item @code{.done} +@tab the DONE keywords, all states that count as done +@item @code{.WAITING} +@tab each TODO keyword also uses a class named after itself +@item @code{.timestamp} +@tab timestamp +@item @code{.timestamp-kwd} +@tab keyword associated with a timestamp, like @samp{SCHEDULED} +@item @code{.timestamp-wrapper} +@tab span around keyword plus timestamp +@item @code{.tag} +@tab tag in a headline +@item @code{._HOME} +@tab each tag uses itself as a class, ``@@'' replaced by ``_'' +@item @code{.target} +@tab target for links +@item @code{.linenr} +@tab the line number in a code example +@item @code{.code-highlighted} +@tab for highlighting referenced code lines +@item @code{div.outline-N} +@tab div for outline level N (headline plus text) +@item @code{div.outline-text-N} +@tab extra div for text at outline level N +@item @code{.section-number-N} +@tab section number in headlines, different for each level +@item @code{.figure-number} +@tab label like ``Figure 1:'' +@item @code{.table-number} +@tab label like ``Table 1:'' +@item @code{.listing-number} +@tab label like ``Listing 1:'' +@item @code{div.figure} +@tab how to format an in-lined image +@item @code{pre.src} +@tab formatted source code +@item @code{pre.example} +@tab normal example +@item @code{p.verse} +@tab verse paragraph +@item @code{div.footnotes} +@tab footnote section headline +@item @code{p.footnote} +@tab footnote definition paragraph, containing a footnote +@item @code{.footref} +@tab a footnote reference number (always a ) +@item @code{.footnum} +@tab footnote number in footnote definition (always ) +@item @code{.org-svg} +@tab default class for a linked @samp{.svg} image +@end multitable + +@vindex org-html-style-default +@vindex org-html-head +@vindex org-html-head-extra +@cindex @samp{HTML_INCLUDE_STYLE}, keyword +The HTML export back-end includes a compact default style in each +exported HTML file. To override the default style with another style, +use these keywords in the Org file. They will replace the global +defaults the HTML exporter uses. + +@cindex @samp{HTML_HEAD}, keyword +@cindex @samp{HTML_HEAD_EXTRA}, keyword +@example +#+HTML_HEAD: +#+HTML_HEAD_EXTRA: +@end example + +@vindex org-html-head-include-default-style +To just turn off the default style, customize +@code{org-html-head-include-default-style} variable, or use this option +line in the Org file. + +@cindex @samp{html-style}, @samp{OPTIONS} item +@example +#+OPTIONS: html-style:nil +@end example + + +For longer style definitions, either use several @samp{HTML_HEAD} and +@samp{HTML_HEAD_EXTRA} keywords, or use @code{} blocks +around them. Both of these approaches can avoid referring to an +external file. + +@cindex @samp{HTML_CONTAINER_CLASS}, property +@cindex @samp{HTML_HEADLINE_CLASS}, property +In order to add styles to a sub-tree, use the @samp{HTML_CONTAINER_CLASS} +property to assign a class to the tree. In order to specify CSS +styles for a particular headline, you can use the ID specified in +a @samp{CUSTOM_ID} property. You can also assign a specific class to +a headline with the @samp{HTML_HEADLINE_CLASS} property. + +Never change the @code{org-html-style-default} constant. Instead use other +simpler ways of customizing as described above. + +@node JavaScript support +@subsection JavaScript supported display of web pages + +Sebastian Rose has written a JavaScript program especially designed to +allow two different ways of viewing HTML files created with Org. One +is an @emph{Info}-like mode where each section is displayed separately and +navigation can be done with the @kbd{n} and @kbd{p} keys, and some other +keys as well, press @kbd{?} for an overview of the available keys. The +second one has a @emph{folding} view, much like Org provides inside Emacs. +The script is available at @uref{https://orgmode.org/org-info.js} and the +documentation at @uref{https://orgmode.org/worg/code/org-info-js/}. The +script is hosted on @uref{https://orgmode.org}, but for reliability, prefer +installing it on your own web server. + +To use this program, just add this line to the Org file: + +@cindex @samp{INFOJS_OPT}, keyword +@example +#+INFOJS_OPT: view:info toc:nil +@end example + + +@noindent +The HTML header now has the code needed to automatically invoke the +script. For setting options, use the syntax from the above line for +options described below: + +@table @asis +@item @samp{path:} +The path to the script. The default is to grab the script from +@uref{https://orgmode.org/org-info.js}, but you might want to have a local +copy and use a path like @samp{../scripts/org-info.js}. + +@item @samp{view:} +Initial view when the website is first shown. Possible values are: + +@multitable {aaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{info} +@tab Info-like interface with one section per page +@item @samp{overview} +@tab Folding interface, initially showing only top-level +@item @samp{content} +@tab Folding interface, starting with all headlines visible +@item @samp{showall} +@tab Folding interface, all headlines and text visible +@end multitable + +@item @samp{sdepth:} +Maximum headline level still considered as an independent section +for info and folding modes. The default is taken from +@code{org-export-headline-levels}, i.e., the @samp{H} switch in @samp{OPTIONS}. If +this is smaller than in @code{org-export-headline-levels}, each +info/folding section can still contain child headlines. + +@item @samp{toc:} +Should the table of contents @emph{initially} be visible? Even when +@samp{nil}, you can always get to the ``toc'' with @kbd{i}. + +@item @samp{tdepth:} +The depth of the table of contents. The defaults are taken from the +variables @code{org-export-headline-levels} and @code{org-export-with-toc}. + +@item @samp{ftoc:} +Does the CSS of the page specify a fixed position for the ``toc''? If +yes, the toc is displayed as a section. + +@item @samp{ltoc:} +Should there be short contents (children) in each section? Make +this @samp{above} if the section should be above initial text. + +@item @samp{mouse:} +Headings are highlighted when the mouse is over them. Should be +@samp{underline} (default) or a background color like @samp{#cccccc}. + +@item @samp{buttons:} +Should view-toggle buttons be everywhere? When @samp{nil} (the default), +only one such button is present. +@end table + +@vindex org-infojs-options +@vindex org-export-html-use-infojs +You can choose default values for these options by customizing the +variable @code{org-infojs-options}. If you always want to apply the script +to your pages, configure the variable @code{org-export-html-use-infojs}. + +@node @LaTeX{} Export +@section @LaTeX{} Export + +@cindex @LaTeX{} export +@cindex PDF export + +The @LaTeX{} export back-end can handle complex documents, incorporate +standard or custom @LaTeX{} document classes, generate documents using +alternate @LaTeX{} engines, and produce fully linked PDF files with +indexes, bibliographies, and tables of contents, destined for +interactive online viewing or high-quality print publication. + +While the details are covered in-depth in this section, here are some +quick references to variables for the impatient: for engines, see +@code{org-latex-compiler}; for build sequences, see +@code{org-latex-pdf-process}; for packages, see +@code{org-latex-default-packages-alist} and @code{org-latex-packages-alist}. + +An important note about the @LaTeX{} export back-end: it is sensitive to +blank lines in the Org document. That's because @LaTeX{} itself depends +on blank lines to tell apart syntactical elements, such as paragraphs. + +@menu +* @LaTeX{}/PDF export commands:: For producing @LaTeX{} and PDF documents. +* @LaTeX{} specific export settings:: Unique to this @LaTeX{} back-end. +* @LaTeX{} header and sectioning:: Setting up the export file structure. +* Quoting @LaTeX{} code:: Incorporating literal @LaTeX{} code. +* Tables in @LaTeX{} export:: Options for exporting tables to @LaTeX{}. +* Images in @LaTeX{} export:: How to insert figures into @LaTeX{} output. +* Plain lists in @LaTeX{} export:: Attributes specific to lists. +* Source blocks in @LaTeX{} export:: Attributes specific to source code blocks. +* Example blocks in @LaTeX{} export:: Attributes specific to example blocks. +* Special blocks in @LaTeX{} export:: Attributes specific to special blocks. +* Horizontal rules in @LaTeX{} export:: Attributes specific to horizontal rules. +* Verse blocks in @LaTeX{} export:: Attributes specific to special blocks. +* Quote blocks in @LaTeX{} export:: Attributes specific to quote blocks. +@end menu + +@node @LaTeX{}/PDF export commands +@subsection @LaTeX{}/PDF export commands + +@table @asis +@item @kbd{C-c C-e l l} (@code{org-latex-export-to-latex}) +@kindex C-c C-e l l +@findex org-latex-export-to-latex~ +Export to a @LaTeX{} file with a @samp{.tex} extension. For @samp{myfile.org}, +Org exports to @samp{myfile.tex}, overwriting without warning. + +@item @kbd{C-c C-e l L} (@code{org-latex-export-as-latex}) +@kindex C-c C-e l L +@findex org-latex-export-as-latex +Export to a temporary buffer. Do not create a file. + +@item @kbd{C-c C-e l p} (@code{org-latex-export-to-pdf}) +@kindex C-c C-e l p +@findex org-latex-export-to-pdf +Export as @LaTeX{} file and convert it to PDF file. + +@item @kbd{C-c C-e l o} +@kindex C-c C-e l o +Export as @LaTeX{} file and convert it to PDF, then open the PDF using +the default viewer. + +@item @kbd{M-x org-export-region-as-latex} +Convert the region to @LaTeX{} under the assumption that it was in Org +mode syntax before. This is a global command that can be invoked in +any buffer. +@end table + +@vindex org-latex-compiler +@vindex org-latex-bibtex-compiler +@vindex org-latex-default-packages-alist +@cindex pdflatex +@cindex xelatex +@cindex lualatex +@cindex @samp{LATEX_COMPILER}, keyword +The @LaTeX{} export back-end can use any of these @LaTeX{} engines: +@samp{pdflatex}, @samp{xelatex}, and @samp{lualatex}. These engines compile @LaTeX{} +files with different compilers, packages, and output options. The +@LaTeX{} export back-end finds the compiler version to use from +@code{org-latex-compiler} variable or the @samp{#+LATEX_COMPILER} keyword in the +Org file. See the docstring for the +@code{org-latex-default-packages-alist} for loading packages with certain +compilers. Also see @code{org-latex-bibtex-compiler} to set the +bibliography compiler@footnote{This does not allow setting different bibliography compilers +for different files. However, ``smart'' @LaTeX{} compilation systems, such +as latexmk, can select the correct bibliography compiler.}. + +@node @LaTeX{} specific export settings +@subsection @LaTeX{} specific export settings + +The @LaTeX{} export back-end has several additional keywords for +customizing @LaTeX{} output. Setting these keywords works similar to the +general options (see @ref{Export Settings}). + +@table @asis +@item @samp{DESCRIPTION} +@cindex @samp{DESCRIPTION}, keyword +@vindex org-latex-hyperref-template +@vindex org-latex-title-command +The document's description. The description along with author name, +keywords, and related file metadata are inserted in the output file +by the hyperref package. See @code{org-latex-hyperref-template} for +customizing metadata items. See @code{org-latex-title-command} for +typesetting description into the document's front matter. Use +multiple @samp{DESCRIPTION} keywords for long descriptions. + +@item @samp{LANGUAGE} +@cindex @samp{LANGUAGE}, keyword +@vindex org-latex-packages-alist +In order to be effective, the @samp{babel} or @samp{polyglossia} +packages---according to the @LaTeX{} compiler used---must be loaded +with the appropriate language as argument. This can be accomplished +by modifying the @code{org-latex-packages-alist} variable, e.g., with the +following snippet: + +@lisp +(add-to-list 'org-latex-packages-alist + '("AUTO" "babel" t ("pdflatex"))) +(add-to-list 'org-latex-packages-alist + '("AUTO" "polyglossia" t ("xelatex" "lualatex"))) +@end lisp + +@item @samp{LATEX_CLASS} +@cindex @samp{LATEX_CLASS}, keyword +@vindex org-latex-default-class +@vindex org-latex-classes +This is @LaTeX{} document class, such as @emph{article}, @emph{report}, @emph{book}, +and so on, which contain predefined preamble and headline level +mapping that the @LaTeX{} export back-end needs. The back-end reads +the default class name from the @code{org-latex-default-class} variable. +Org has @emph{article} as the default class. A valid default class must +be an element of @code{org-latex-classes}. + +@item @samp{LATEX_CLASS_OPTIONS} +@cindex @samp{LATEX_CLASS_OPTIONS}, keyword +Options the @LaTeX{} export back-end uses when calling the @LaTeX{} +document class. + +@item @samp{LATEX_COMPILER} +@cindex @samp{LATEX_COMPILER}, keyword +@vindex org-latex-compiler +The compiler, such as @samp{pdflatex}, @samp{xelatex}, @samp{lualatex}, for +producing the PDF@. See @code{org-latex-compiler}. + +@item @samp{LATEX_HEADER} +@itemx @samp{LATEX_HEADER_EXTRA} +@cindex @samp{LATEX_HEADER}, keyword +@cindex @samp{LATEX_HEADER_EXTRA}, keyword +@vindex org-latex-classes +Arbitrary lines to add to the document's preamble, before the +hyperref settings. See @code{org-latex-classes} for adjusting the +structure and order of the @LaTeX{} headers. + +@item @samp{KEYWORDS} +@cindex @samp{KEYWORDS}, keyword +@vindex org-latex-hyperref-template +@vindex org-latex-title-command +The keywords for the document. The description along with author +name, keywords, and related file metadata are inserted in the output +file by the hyperref package. See @code{org-latex-hyperref-template} for +customizing metadata items. See @code{org-latex-title-command} for +typesetting description into the document's front matter. Use +multiple @samp{KEYWORDS} lines if necessary. + +@item @samp{SUBTITLE} +@cindex @samp{SUBTITLE}, keyword +@vindex org-latex-subtitle-separate +@vindex org-latex-subtitle-format +The document's subtitle. It is typeset as per +@code{org-latex-subtitle-format}. If @code{org-latex-subtitle-separate} is +non-@code{nil}, it is typed outside of the @code{\title} macro. See +@code{org-latex-hyperref-template} for customizing metadata items. See +@code{org-latex-title-command} for typesetting description into the +document's front matter. +@end table + +The following sections have further details. + +@node @LaTeX{} header and sectioning +@subsection @LaTeX{} header and sectioning structure + +@cindex @LaTeX{} class +@cindex @LaTeX{} sectioning structure +@cindex @LaTeX{} header +@cindex header, for @LaTeX{} files +@cindex sectioning structure, for @LaTeX{} export + +The @LaTeX{} export back-end converts the first three of Org's outline +levels into @LaTeX{} headlines. The remaining Org levels are exported as +lists. To change this globally for the cut-off point between levels +and lists, (see @ref{Export Settings}). + +By default, the @LaTeX{} export back-end uses the @emph{article} class. + +@vindex org-latex-default-class +@vindex org-latex-classes +@vindex org-latex-default-packages-alist +@vindex org-latex-packages-alist +To change the default class globally, edit @code{org-latex-default-class}. +To change the default class locally in an Org file, add option lines +@samp{#+LATEX_CLASS: myclass}. To change the default class for just a part +of the Org file, set a sub-tree property, @samp{EXPORT_LATEX_CLASS}. The +class name entered here must be valid member of @code{org-latex-classes}. +This variable defines a header template for each class into which the +exporter splices the values of @code{org-latex-default-packages-alist} and +@code{org-latex-packages-alist}. Use the same three variables to define +custom sectioning or custom classes. + +@cindex @samp{LATEX_CLASS}, keyword +@cindex @samp{LATEX_CLASS_OPTIONS}, keyword +@cindex @samp{EXPORT_LATEX_CLASS}, property +@cindex @samp{EXPORT_LATEX_CLASS_OPTIONS}, property +The @LaTeX{} export back-end sends the @samp{LATEX_CLASS_OPTIONS} keyword and +@samp{EXPORT_LATEX_CLASS_OPTIONS} property as options to the @LaTeX{} +@code{\documentclass} macro. The options and the syntax for specifying +them, including enclosing them in square brackets, follow @LaTeX{} +conventions. + +@example +#+LATEX_CLASS_OPTIONS: [a4paper,11pt,twoside,twocolumn] +@end example + + +@cindex @samp{LATEX_HEADER}, keyword +@cindex @samp{LATEX_HEADER_EXTRA}, keyword +The @LaTeX{} export back-end appends values from @samp{LATEX_HEADER} and +@samp{LATEX_HEADER_EXTRA} keywords to the @LaTeX{} header. The docstring for +@code{org-latex-classes} explains in more detail. Also note that @LaTeX{} +export back-end does not append @samp{LATEX_HEADER_EXTRA} to the header +when previewing @LaTeX{} snippets (see @ref{Previewing @LaTeX{} fragments}). + +A sample Org file with the above headers: + +@example +#+LATEX_CLASS: article +#+LATEX_CLASS_OPTIONS: [a4paper] +#+LATEX_HEADER: \usepackage@{xyz@} + +* Headline 1 + some text +* Headline 2 + some more text +@end example + +@node Quoting @LaTeX{} code +@subsection Quoting @LaTeX{} code + +The @LaTeX{} export back-end can insert any arbitrary @LaTeX{} code, see +@ref{Embedded @LaTeX{}}. There are three ways to embed such code in the Org +file and they all use different quoting syntax. + +@cindex inline, in @LaTeX{} export +Inserting in-line quoted with @@ symbols: + +@example +Code embedded in-line @@@@latex:any arbitrary LaTeX code@@@@ in a paragraph. +@end example + + +@cindex @samp{LATEX}, keyword +Inserting as one or more keyword lines in the Org file: + +@example +#+LATEX: any arbitrary LaTeX code +@end example + + +@cindex @samp{BEGIN_EXPORT latex} +Inserting as an export block in the Org file, where the back-end +exports any code between begin and end markers: + +@example +#+BEGIN_EXPORT latex + any arbitrary LaTeX code +#+END_EXPORT +@end example + +@node Tables in @LaTeX{} export +@subsection Tables in @LaTeX{} export + +@cindex tables, in @LaTeX{} export + +The @LaTeX{} export back-end can pass several @LaTeX{} attributes for table +contents and layout. Besides specifying a label (see @ref{Internal Links}) +and a caption (see @ref{Captions}), the other valid @LaTeX{} attributes +include: + +@table @asis +@item @samp{:mode} +@vindex org-latex-default-table-mode +The @LaTeX{} export back-end wraps the table differently depending on +the mode for accurate rendering of math symbols. Mode is either +@samp{table}, @samp{math}, @samp{inline-math} or @samp{verbatim}. + +For @samp{math} or @samp{inline-math} mode, @LaTeX{} export back-end wraps the +table in a math environment, but every cell in it is exported as-is. +The @LaTeX{} export back-end determines the default mode from +@code{org-latex-default-table-mode}. The @LaTeX{} export back-end merges +contiguous tables in the same mode into a single environment. + +@item @samp{:environment} +@vindex org-latex-default-table-environment +Set the default @LaTeX{} table environment for the @LaTeX{} export +back-end to use when exporting Org tables. Common @LaTeX{} table +environments are provided by these packages: tabularx, longtable, +array, tabu, and bmatrix. For packages, such as tabularx and tabu, +or any newer replacements, include them in the +@code{org-latex-packages-alist} variable so the @LaTeX{} export back-end can +insert the appropriate load package headers in the converted @LaTeX{} +file. Look in the docstring for the @code{org-latex-packages-alist} +variable for configuring these packages for @LaTeX{} snippet previews, +if any. + +@item @samp{:caption} +Use @samp{CAPTION} keyword to set a simple caption for a table (see +@ref{Captions}). For custom captions, use @samp{:caption} attribute, which +accepts raw @LaTeX{} code. @samp{:caption} value overrides @samp{CAPTION} value. + +@item @samp{:float} +@itemx @samp{:placement} +The table environments by default are not floats in @LaTeX{}. To make +them floating objects use @samp{:float} with one of the following +options: @samp{sideways}, @samp{multicolumn}, @samp{t}, and @samp{nil}. + +@LaTeX{} floats can also have additional layout @samp{:placement} +attributes. These are the usual @samp{[h t b p ! H]} permissions +specified in square brackets. Note that for @samp{:float sideways} +tables, the @LaTeX{} export back-end ignores @samp{:placement} attributes. + +@item @samp{:align} +@itemx @samp{:font} +@itemx @samp{:width} +The @LaTeX{} export back-end uses these attributes for regular tables +to set their alignments, fonts, and widths. + +@item @samp{:spread} +When @samp{:spread} is non-@code{nil}, the @LaTeX{} export back-end spreads or +shrinks the table by the @samp{:width} for tabu and longtabu +environments. @samp{:spread} has no effect if @samp{:width} is not set. + +@item @samp{:booktabs} +@itemx @samp{:center} +@itemx @samp{:rmlines} +@vindex org-latex-tables-booktabs +@vindex org-latex-tables-centered +All three commands are toggles. @samp{:booktabs} brings in modern +typesetting enhancements to regular tables. The booktabs package +has to be loaded through @code{org-latex-packages-alist}. @samp{:center} is +for centering the table. @samp{:rmlines} removes all but the very first +horizontal line made of ASCII characters from ``table.el'' tables +only. + +@item @samp{:math-prefix} +@itemx @samp{:math-suffix} +@itemx @samp{:math-arguments} +The @LaTeX{} export back-end inserts @samp{:math-prefix} string value in +a math environment before the table. The @LaTeX{} export back-end +inserts @samp{:math-suffix} string value in a math environment after the +table. The @LaTeX{} export back-end inserts @samp{:math-arguments} string +value between the macro name and the table's contents. +@samp{:math-arguments} comes in use for matrix macros that require more +than one argument, such as @samp{qbordermatrix}. +@end table + +@LaTeX{} table attributes help formatting tables for a wide range of +situations, such as matrix product or spanning multiple pages: + +@example +#+ATTR_LATEX: :environment longtable :align l|lp@{3cm@}r|l +| ... | ... | +| ... | ... | + +#+ATTR_LATEX: :mode math :environment bmatrix :math-suffix \times +| a | b | +| c | d | +#+ATTR_LATEX: :mode math :environment bmatrix +| 1 | 2 | +| 3 | 4 | +@end example + +Set the caption with the @LaTeX{} command +@samp{\bicaption@{HeadingA@}@{HeadingB@}}: + +@example +#+ATTR_LATEX: :caption \bicaption@{HeadingA@}@{HeadingB@} +| ... | ... | +| ... | ... | +@end example + +@node Images in @LaTeX{} export +@subsection Images in @LaTeX{} export + +@cindex images, inline in LaTeX +@cindex inlining images in LaTeX +@cindex @samp{ATTR_LATEX}, keyword + +The @LaTeX{} export back-end processes image links in Org files that do +not have descriptions, such as these links @samp{[[file:img.jpg]]} or +@samp{[[./img.jpg]]}, as direct image insertions in the final PDF output. In +the PDF, they are no longer links but actual images embedded on the +page. The @LaTeX{} export back-end uses @samp{\includegraphics} macro to +insert the image. But for TikZ (@uref{http://sourceforge.net/projects/pgf/}) +images, the back-end uses an @code{\input} macro wrapped within +a @code{tikzpicture} environment. + +For specifying image @samp{:width}, @samp{:height}, @samp{:scale} and other @samp{:options}, +use this syntax: + +@example +#+ATTR_LATEX: :width 5cm :options angle=90 +[[./img/sed-hr4049.pdf]] +@end example + +A @samp{:scale} attribute overrides both @samp{:width} and @samp{:height} attributes. + +For custom commands for captions, use the @samp{:caption} attribute. It +overrides the default @samp{#+CAPTION} value: + +@example +#+ATTR_LATEX: :caption \bicaption@{HeadingA@}@{HeadingB@} +[[./img/sed-hr4049.pdf]] +@end example + +When captions follow the method as described in @ref{Captions}, the @LaTeX{} +export back-end wraps the picture in a floating @samp{figure} environment. +To float an image without specifying a caption, set the @samp{:float} +attribute to one of the following: + +@table @asis +@item @samp{t} +For a standard @samp{figure} environment; used by default whenever an +image has a caption. + +@item @samp{multicolumn} +To span the image across multiple columns of a page; the back-end +wraps the image in a @samp{figure*} environment. + +@item @samp{wrap} +For text to flow around the image on the right; the figure occupies +the left half of the page. + +@item @samp{sideways} +For a new page with the image sideways, rotated ninety degrees, in +a @samp{sidewaysfigure} environment; overrides @samp{:placement} setting. + +@item @samp{nil} +To avoid a @samp{:float} even if using a caption. +@end table + +Use the @samp{placement} attribute to modify a floating environment's +placement. + +@example +#+ATTR_LATEX: :float wrap :width 0.38\textwidth :placement @{r@}@{0.4\textwidth@} +[[./img/hst.png]] +@end example + +@vindex org-latex-images-centered +@cindex center image in LaTeX export +@cindex image, centering in LaTeX export +The @LaTeX{} export back-end centers all images by default. Setting +@samp{:center} to @samp{nil} disables centering. To disable centering globally, +set @code{org-latex-images-centered} to @samp{nil}. + +Set the @samp{:comment-include} attribute to non-@code{nil} value for the @LaTeX{} +export back-end to comment out the @samp{\includegraphics} macro. + +@node Plain lists in @LaTeX{} export +@subsection Plain lists in @LaTeX{} export + +@cindex plain lists, in @LaTeX{} export +@cindex @samp{ATTR_LATEX}, keyword +The @LaTeX{} export back-end accepts the @samp{environment} and @samp{options} +attributes for plain lists. Both attributes work together for +customizing lists, as shown in the examples: + +@example +#+LATEX_HEADER: \usepackage[inline]@{enumitem@} +Some ways to say "Hello": +#+ATTR_LATEX: :environment itemize* +#+ATTR_LATEX: :options [label=@{@}, itemjoin=@{,@}, itemjoin*=@{, and@}] +- Hola +- Bonjour +- Guten Tag. +@end example + +Since @LaTeX{} supports only four levels of nesting for lists, use an +external package, such as @samp{enumitem} in @LaTeX{}, for levels deeper than +four: + +@example +#+LATEX_HEADER: \usepackage@{enumitem@} +#+LATEX_HEADER: \renewlist@{itemize@}@{itemize@}@{9@} +#+LATEX_HEADER: \setlist[itemize]@{label=$\circ$@} +- One + - Two + - Three + - Four + - Five +@end example + +@node Source blocks in @LaTeX{} export +@subsection Source blocks in @LaTeX{} export + +@cindex source blocks, in @LaTeX{} export +@cindex @samp{ATTR_LATEX}, keyword + +The @LaTeX{} export back-end can make source code blocks into floating +objects through the attributes @samp{:float} and @samp{:options}. For @samp{:float}: + +@table @asis +@item @samp{t} +Makes a source block float; by default floats any source block with +a caption. + +@item @samp{multicolumn} +Spans the source block across multiple columns of a page. + +@item @samp{nil} +Avoids a @samp{:float} even if using a caption; useful for source code +blocks that may not fit on a page. +@end table + +@example +#+ATTR_LATEX: :float nil +#+BEGIN_SRC emacs-lisp + Lisp code that may not fit in a single page. +#+END_SRC +@end example + +@vindex org-latex-listings-options +@vindex org-latex-minted-options +The @LaTeX{} export back-end passes string values in @samp{:options} to @LaTeX{} +packages for customization of that specific source block. In the +example below, the @samp{:options} are set for Minted. Minted is a source +code highlighting @LaTeX{} package with many configurable options@footnote{Minted uses an external Python package for code highlighting, +which requires the flag @samp{-shell-escape} to be added to +@code{org-latex-pdf-process}.}. + +@example +#+ATTR_LATEX: :options commentstyle=\bfseries +#+BEGIN_SRC emacs-lisp + (defun Fib (n) + (if (< n 2) n (+ (Fib (- n 1)) (Fib (- n 2))))) +#+END_SRC +@end example + +To apply similar configuration options for all source blocks in +a file, use the @code{org-latex-listings-options} and +@code{org-latex-minted-options} variables. + +@node Example blocks in @LaTeX{} export +@subsection Example blocks in @LaTeX{} export + +@cindex example blocks, in @LaTeX{} export +@cindex verbatim blocks, in @LaTeX{} export +@cindex @samp{ATTR_LATEX}, keyword + +The @LaTeX{} export back-end wraps the contents of example blocks in +a @samp{verbatim} environment. To change this behavior to use another +environment globally, specify an appropriate export filter (see +@ref{Advanced Export Configuration}). To change this behavior to use +another environment for each block, use the @samp{:environment} parameter +to specify a custom environment. + +@example +#+ATTR_LATEX: :environment myverbatim +#+BEGIN_EXAMPLE + This sentence is false. +#+END_EXAMPLE +@end example + +@node Special blocks in @LaTeX{} export +@subsection Special blocks in @LaTeX{} export + +@cindex special blocks, in @LaTeX{} export +@cindex abstract, in @LaTeX{} export +@cindex proof, in @LaTeX{} export +@cindex @samp{ATTR_LATEX}, keyword + +For other special blocks in the Org file, the @LaTeX{} export back-end +makes a special environment of the same name. The back-end also takes +@samp{:options}, if any, and appends as-is to that environment's opening +string. For example: + +@example +#+BEGIN_abstract + We demonstrate how to solve the Syracuse problem. +#+END_abstract + +#+ATTR_LATEX: :options [Proof of important theorem] +#+BEGIN_proof + ... + Therefore, any even number greater than 2 is the sum of two primes. +#+END_proof +@end example + +@noindent +exports to + +@example +\begin@{abstract@} + We demonstrate how to solve the Syracuse problem. +\end@{abstract@} + +\begin@{proof@}[Proof of important theorem] + ... + Therefore, any even number greater than 2 is the sum of two primes. +\end@{proof@} +@end example + +If you need to insert a specific caption command, use @samp{:caption} +attribute. It overrides standard @samp{CAPTION} value, if any. For +example: + +@example +#+ATTR_LATEX: :caption \MyCaption@{HeadingA@} +#+BEGIN_proof + ... +#+END_proof +@end example + +@node Horizontal rules in @LaTeX{} export +@subsection Horizontal rules in @LaTeX{} export + +@cindex horizontal rules, in @LaTeX{} export +@cindex @samp{ATTR_LATEX}, keyword + +The @LaTeX{} export back-end converts horizontal rules by the specified +@samp{:width} and @samp{:thickness} attributes. For example: + +@example +#+ATTR_LATEX: :width .6\textwidth :thickness 0.8pt +----- +@end example + +@node Verse blocks in @LaTeX{} export +@subsection Verse blocks in @LaTeX{} export + +@cindex verse blocks, in @LaTeX{} export +@cindex @samp{ATTR_LATEX}, keyword + +The @LaTeX{} export back-end accepts four attributes for verse blocks: +@samp{:lines}, @samp{:center}, @samp{:versewidth} and @samp{:latexcode}. The three first +require the external @LaTeX{} package @samp{verse.sty}, which is an extension +of the standard @LaTeX{} environment. + +@table @asis +@item @samp{:lines} +To add marginal verse numbering. Its value is an +integer, the sequence in which the verses should be numbered. +@item @samp{:center} +With value @samp{t} all the verses on the page are optically +centered (a typographic convention for poetry), taking as a +reference the longest verse, which must be indicated by the +attribute @samp{:versewidth}. +@item @samp{:versewidth} +Its value is a literal text string with the longest +verse. +@item @samp{:latexcode} +It accepts any arbitrary @LaTeX{} code that can be +included within a @LaTeX{} @samp{verse} environment. +@end table + +A complete example with Shakespeare's first sonnet: + +@example +#+ATTR_LATEX: :center t :latexcode \color@{red@} :lines 5 +#+ATTR_LATEX: :versewidth Feed’st thy light’s flame with self-substantial fuel, +#+BEGIN_VERSE +From fairest creatures we desire increase, +That thereby beauty’s rose might never die, +But as the riper should by time decease +His tender heir might bear his memory +But thou, contracted to thine own bright eyes, +Feed’st thy light’s flame with self-substantial fuel, +Making a famine where abundance lies, +Thyself thy foe, to thy sweet self too cruel. +Thou that art now the world’s fresh ornament, +And only herald to the gaudy spring, +Within thine own bud buriest thy content, +And, tender churl, mak’st waste in niggardly. +Pity the world, or else this glutton be, +To eat the world’s due, by the grave and thee. +#+END_VERSE +@end example + +@node Quote blocks in @LaTeX{} export +@subsection Quote blocks in @LaTeX{} export + +@cindex quote blocks, in @LaTeX{} export +@cindex @samp{ATTR_LATEX}, keyword +@cindex org-latex-default-quote-environment + +The @LaTeX{} export back-end accepts two attributes for quote blocks: +@samp{:environment}, for an arbitrary quoting environment (the default +value is that of @code{org-latex-default-quote-environment}: @code{"quote"}) and +@samp{:options}. For example, to choose the environment @samp{quotation}, +included as an alternative to @samp{quote} in standard @LaTeX{} classes: + +@example +#+ATTR_LATEX: :environment quotation +#+BEGIN_QUOTE +some text... +#+END_QUOTE +@end example + +To choose the @samp{foreigndisplayquote} environment, included in the @LaTeX{} +package @samp{csquotes}, with the @samp{german} option, use this syntax: + +@example +#+LATEX_HEADER:\usepackage[autostyle=true]@{csquotes@} +#+ATTR_LATEX: :environment foreigndisplayquote :options @{german@} +#+BEGIN_QUOTE +some text in German... +#+END_QUOTE +@end example + +@noindent +which is exported to @LaTeX{} as + +@example +\begin@{foreigndisplayquote@}@{german@} +some text in German... +\end@{foreigndisplayquote@} +@end example + +@node Markdown Export +@section Markdown Export + +@cindex Markdown export + +The Markdown export back-end, ``md'', converts an Org file to Markdown +format, as defined at @uref{http://daringfireball.net/projects/markdown/}. + +Since it is built on top of the HTML back-end (see @ref{HTML Export}), it +converts every Org construct not defined in Markdown syntax, such as +tables, to HTML@. + +@anchor{Markdown export commands} +@subheading Markdown export commands + +@table @asis +@item @kbd{C-c C-e m m} (@code{org-md-export-to-markdown}) +@kindex C-c C-c m m +@findex org-md-export-to-markdown +Export to a text file with Markdown syntax. For @samp{myfile.org}, Org +exports to @samp{myfile.md}, overwritten without warning. + +@item @kbd{C-c C-e m M} (@code{org-md-export-as-markdown}) +@kindex C-c C-c m M +@findex org-md-export-as-markdown +Export to a temporary buffer. Does not create a file. + +@item @kbd{C-c C-e m o} +@kindex C-c C-e m o +Export as a text file with Markdown syntax, then open it. +@end table + +@anchor{Header and sectioning structure (1)} +@subheading Header and sectioning structure + +@vindex org-md-headline-style +Based on @code{org-md-headline-style}, Markdown export can generate +headlines of both @emph{atx} and @emph{setext} types. @emph{atx} limits headline +levels to two whereas @emph{setext} limits headline levels to six. Beyond +these limits, the export back-end converts headlines to lists. To set +a limit to a level before the absolute limit (see @ref{Export Settings}). + +@node OpenDocument Text Export +@section OpenDocument Text Export + +@cindex ODT +@cindex OpenDocument +@cindex export, OpenDocument +@cindex LibreOffice + +The ODT export back-end handles creating of OpenDocument Text (ODT) +format. Documents created by this exporter use the +@cite{OpenDocument-v1.2 specification}@footnote{See @uref{http://docs.oasis-open.org/office/v1.2/OpenDocument-v1.2.html, Open Document Format for Office Applications +(OpenDocument) Version 1.2}.} and are compatible +with LibreOffice 3.4. + +@menu +* Pre-requisites for ODT export:: Required packages. +* ODT export commands:: Invoking export. +* ODT specific export settings:: Configuration options. +* Extending ODT export:: Producing DOC, PDF files. +* Applying custom styles:: Styling the output. +* Links in ODT export:: Handling and formatting links. +* Tables in ODT export:: Org tables conversions. +* Images in ODT export:: Inserting images. +* Math formatting in ODT export:: Formatting @LaTeX{} fragments. +* Labels and captions in ODT export:: Rendering objects. +* Literal examples in ODT export:: For source code and example blocks. +* Advanced topics in ODT export:: For power users. +@end menu + +@node Pre-requisites for ODT export +@subsection Pre-requisites for ODT export + +@cindex zip + +The ODT export back-end relies on the zip program to create the final +compressed ODT output. Check if @samp{zip} is locally available and +executable. Without it, export cannot finish. + +@node ODT export commands +@subsection ODT export commands + +@table @asis +@item @kbd{C-c C-e o o} (@code{org-export-to-odt}) +@kindex C-c C-e o o +@findex org-export-to-odt +Export as OpenDocument Text file. + +@cindex @samp{EXPORT_FILE_NAME}, property +@vindex org-odt-preferred-output-format + +If @code{org-odt-preferred-output-format} is specified, the ODT export +back-end automatically converts the exported file to that format. + +For @samp{myfile.org}, Org exports to @samp{myfile.odt}, overwriting without +warning. The ODT export back-end exports a region only if a region +was active. + +If the selected region is a single tree, the ODT export back-end +makes the tree head the document title. Incidentally, @kbd{C-c @@} selects the current sub-tree. If the tree head entry has, or +inherits, an @samp{EXPORT_FILE_NAME} property, the ODT export back-end +uses that for file name. + +@item @kbd{C-c C-e o O} +@kindex C-c C-e o O +Export as an OpenDocument Text file and open the resulting file. + +@vindex org-export-odt-preferred-output-format +If @code{org-export-odt-preferred-output-format} is specified, open the +converted file instead. See @ref{Automatically exporting to other formats}. +@end table + +@node ODT specific export settings +@subsection ODT specific export settings + +The ODT export back-end has several additional keywords for +customizing ODT output. Setting these keywords works similar to the +general options (see @ref{Export Settings}). + +@table @asis +@item @samp{DESCRIPTION} +@cindex @samp{DESCRIPTION}, keyword +This is the document's description, which the ODT export back-end +inserts as document metadata. For long descriptions, use multiple +lines, prefixed with @samp{DESCRIPTION}. + +@item @samp{KEYWORDS} +@cindex @samp{KEYWORDS}, keyword +The keywords for the document. The ODT export back-end inserts the +description along with author name, keywords, and related file +metadata as metadata in the output file. Use multiple @samp{KEYWORDS} if +necessary. + +@item @samp{ODT_STYLES_FILE} +@cindex @samp{ODT_STYLES_FILE}, keyword +@vindex org-odt-styles-file +The ODT export back-end uses the @code{org-odt-styles-file} by default. +See @ref{Applying custom styles} for details. + +@item @samp{SUBTITLE} +@cindex @samp{SUBTITLE}, keyword +The document subtitle. +@end table + +@node Extending ODT export +@subsection Extending ODT export + +The ODT export back-end can produce documents in other formats besides +ODT using a specialized ODT converter process. Its common interface +works with popular converters to produce formats such as @samp{doc}, or +convert a document from one format, say @samp{csv}, to another format, say +@samp{xls}. + +@cindex @file{unoconv} +@vindex org-odt-convert-process +Customize @code{org-odt-convert-process} variable to point to @samp{unoconv}, +which is the ODT's preferred converter. Working installations of +LibreOffice would already have @samp{unoconv} installed. Alternatively, +other converters may be substituted here. See @ref{Configuring a document converter}. + +@anchor{Automatically exporting to other formats} +@subsubheading Automatically exporting to other formats + +@vindex org-odt-preferred-output-format +If ODT format is just an intermediate step to get to other formats, +such as @samp{doc}, @samp{docx}, @samp{rtf}, or @samp{pdf}, etc., then extend the ODT +export back-end to directly produce that format. Specify the final +format in the @code{org-odt-preferred-output-format} variable. This is one +way to extend (see @ref{ODT export commands}). + +@anchor{Converting between document formats} +@subsubheading Converting between document formats + +The Org export back-end is made to be inter-operable with a wide range +of text document format converters. Newer generation converters, such +as LibreOffice and Pandoc, can handle hundreds of formats at once. +Org provides a consistent interaction with whatever converter is +installed. Here are some generic commands: + +@table @asis +@item @kbd{M-x org-odt-convert} +@findex org-odt-convert +Convert an existing document from one format to another. With +a prefix argument, opens the newly produced file. +@end table + +@node Applying custom styles +@subsection Applying custom styles + +@cindex styles, custom +@cindex template, custom + +The ODT export back-end comes with many OpenDocument styles (see +@ref{Working with OpenDocument style files}). To expand or further +customize these built-in style sheets, either edit the style sheets +directly or generate them using an application such as LibreOffice. +The example here shows creating a style using LibreOffice. + +@anchor{Applying custom styles the easy way} +@subsubheading Applying custom styles: the easy way + +@enumerate +@item +Create a sample @samp{example.org} file with settings as shown below, +and export it to ODT format. + +@example +#+OPTIONS: H:10 num:t +@end example + +@item +Open the above @samp{example.odt} using LibreOffice. Use the @emph{Stylist} +to locate the target styles, which typically have the ``Org'' prefix. +Open one, modify, and save as either OpenDocument Text (ODT) or +OpenDocument Template (OTT) file. + +@item +@vindex org-odt-styles-file +Customize the variable @code{org-odt-styles-file} and point it to the +newly created file. For additional configuration options, see +@ref{x-overriding-factory-styles, , Overriding factory styles}. + +@cindex @samp{ODT_STYLES_FILE}, keyword +To apply an ODT style to a particular file, use the +@samp{ODT_STYLES_FILE} keyword as shown in the example below: + +@example +#+ODT_STYLES_FILE: "/path/to/example.ott" +@end example + + +@noindent +or + +@example +#+ODT_STYLES_FILE: ("/path/to/file.ott" ("styles.xml" "image/hdr.png")) +@end example +@end enumerate + +@anchor{Using third-party styles and templates} +@subsubheading Using third-party styles and templates + +The ODT export back-end relies on many templates and style names. +Using third-party styles and templates can lead to mismatches. +Templates derived from built in ODT templates and styles seem to have +fewer problems. + +@node Links in ODT export +@subsection Links in ODT export + +@cindex links, in ODT export + +ODT exporter creates native cross-references for internal links. It +creates Internet-style links for all other links. + +A link with no description and pointing to a regular, un-itemized, +outline heading is replaced with a cross-reference and section number +of the heading. + +A @samp{\ref@{label@}}-style reference to an image, table etc., is replaced +with a cross-reference and sequence number of the labeled entity. See +@ref{Labels and captions in ODT export}. + +@node Tables in ODT export +@subsection Tables in ODT export + +@cindex tables, in ODT export + +The ODT export back-end handles native Org mode tables (see @ref{Tables}) +and simple @samp{table.el} tables. Complex @samp{table.el} tables having column +or row spans are not supported. Such tables are stripped from the +exported document. + +By default, the ODT export back-end exports a table with top and +bottom frames and with ruled lines separating row and column groups +(see @ref{Column Groups}). All tables are typeset to occupy the same +width. The ODT export back-end honors any table alignments and +relative widths for columns (see @ref{Column Width and Alignment}). + +Note that the ODT export back-end interprets column widths as weighted +ratios, the default weight being 1. + +@cindex @samp{ATTR_ODT}, keyword +Specifying @samp{:rel-width} property on an @samp{ATTR_ODT} line controls the +width of the table. For example: + +@example +#+ATTR_ODT: :rel-width 50 +| Area/Month | Jan | Feb | Mar | Sum | +|---------------+-------+-------+-------+-------| +| / | < | | | < | +| | | | | | +| North America | 1 | 21 | 926 | 948 | +| Middle East | 6 | 75 | 844 | 925 | +| Asia Pacific | 9 | 27 | 790 | 826 | +|---------------+-------+-------+-------+-------| +| Sum | 16 | 123 | 2560 | 2699 | +@end example + +On export, the above table takes 50% of text width area. The exporter +sizes the columns in the ratio: 13:5:5:5:6. The first column is +left-aligned and rest of the columns, right-aligned. Vertical rules +separate the header and the last column. Horizontal rules separate +the header and the last row. + +For even more customization, create custom table styles and associate +them with a table using the @samp{ATTR_ODT} keyword. See @ref{Customizing tables in ODT export}. + +@node Images in ODT export +@subsection Images in ODT export + +@cindex images, embedding in ODT +@cindex embedding images in ODT + +@anchor{Embedding images} +@subsubheading Embedding images + +The ODT export back-end processes image links in Org files that do not +have descriptions, such as these links @samp{[[file:img.jpg]]} or @samp{[[./img.jpg]]}, +as direct image insertions in the final output. Either of these +examples works: + +@example +[[file:img.png]] +@end example + + +@example +[[./img.png]] +@end example + +@anchor{Embedding clickable images} +@subsubheading Embedding clickable images + +For clickable images, provide a link whose description is another link +to an image file. For example, to embed an image +@samp{org-mode-unicorn.png} which when clicked jumps to @uref{https://orgmode.org} +website, do the following + +@example +[[https://orgmode.org][./org-mode-unicorn.png]] +@end example + +@anchor{Sizing and scaling of embedded images} +@subsubheading Sizing and scaling of embedded images + +@cindex @samp{ATTR_ODT}, keyword + +Control the size and scale of the embedded images with the @samp{ATTR_ODT} +attribute. + +@cindex identify, ImageMagick +@vindex org-odt-pixels-per-inch +The ODT export back-end starts with establishing the size of the image +in the final document. The dimensions of this size are measured in +centimeters. The back-end then queries the image file for its +dimensions measured in pixels. For this measurement, the back-end +relies on ImageMagick's identify program or Emacs @code{create-image} and +@code{image-size} API@. ImageMagick is the preferred choice for large file +sizes or frequent batch operations. The back-end then converts the +pixel dimensions using @code{org-odt-pixels-per-inch} into the familiar 72 +dpi or 96 dpi. The default value for this is in +@code{display-pixels-per-inch}, which can be tweaked for better results +based on the capabilities of the output device. Here are some common +image scaling operations: + +@table @asis +@item Explicitly size the image +To embed @samp{img.png} as a 10 cm x 10 cm image, do the following: + +@example +#+ATTR_ODT: :width 10 :height 10 +[[./img.png]] +@end example + +@item Scale the image +To embed @samp{img.png} at half its size, do the following: + +@example +#+ATTR_ODT: :scale 0.5 +[[./img.png]] +@end example + +@item Scale the image to a specific width +To embed @samp{img.png} with a width of 10 cm while retaining the +original height:width ratio, do the following: + +@example +#+ATTR_ODT: :width 10 +[[./img.png]] +@end example + +@item Scale the image to a specific height +To embed @samp{img.png} with a height of 10 cm while retaining the +original height:width ratio, do the following: + +@example +#+ATTR_ODT: :height 10 +[[./img.png]] +@end example +@end table + +@anchor{Anchoring of images} +@subsubheading Anchoring of images + +@cindex @samp{ATTR_ODT}, keyword +The ODT export back-end can anchor images to @samp{as-char}, @samp{paragraph}, +or @samp{page}. Set the preferred anchor using the @samp{:anchor} property of +the @samp{ATTR_ODT} line. + +To create an image that is anchored to a page: + +@example +#+ATTR_ODT: :anchor page +[[./img.png]] +@end example + +@node Math formatting in ODT export +@subsection Math formatting in ODT export + +The ODT exporter has special support for handling math. + +@menu +* @LaTeX{} math snippets:: Embedding in @LaTeX{} format. +* MathML and OpenDocument formula files:: Embedding in native format. +@end menu + +@node @LaTeX{} math snippets +@subsubsection @LaTeX{} math snippets + +@LaTeX{} math snippets (see @ref{@LaTeX{} fragments}) can be embedded in the ODT +document in one of the following ways: + +@table @asis +@item MathML +@cindex MathML +Add this line to the Org file. This option is activated on +a per-file basis. + +@example +#+OPTIONS: tex:t +@end example + + +With this option, @LaTeX{} fragments are first converted into MathML +fragments using an external @LaTeX{}-to-MathML converter program. The +resulting MathML fragments are then embedded as an OpenDocument +Formula in the exported document. + +@vindex org-latex-to-mathml-convert-command +@vindex org-latex-to-mathml-jar-file +You can specify the @LaTeX{}-to-MathML converter by customizing the +variables @code{org-latex-to-mathml-convert-command} and +@code{org-latex-to-mathml-jar-file}. + +If you prefer to use MathToWeb@footnote{See @uref{http://www.mathtoweb.com/cgi-bin/mathtoweb_home.pl, MathToWeb}.} as your converter, you can +configure the above variables as shown below. + +@lisp +(setq org-latex-to-mathml-convert-command + "java -jar %j -unicode -force -df %o %I" + org-latex-to-mathml-jar-file + "/path/to/mathtoweb.jar") +@end lisp + +@noindent +or, to use @LaTeX{}​ML@footnote{See @uref{http://dlmf.nist.gov/LaTeXML/}.} instead, + +@lisp +(setq org-latex-to-mathml-convert-command + "latexmlmath \"%i\" --presentationmathml=%o") +@end lisp + +To quickly verify the reliability of the @LaTeX{}-to-MathML +converter, use the following commands: + +@table @asis +@item @kbd{M-x org-export-as-odf} +Convert a @LaTeX{} math snippet to an OpenDocument formula (@samp{.odf}) +file. + +@item @kbd{M-x org-export-as-odf-and-open} +Convert a @LaTeX{} math snippet to an OpenDocument formula (@samp{.odf}) +file and open the formula file with the system-registered +application. +@end table + +@item PNG images +@cindex dvipng +@cindex dvisvgm +@cindex ImageMagick +Add this line to the Org file. This option is activated on +a per-file basis. + +@example +#+OPTIONS: tex:dvipng +@end example + + +@example +#+OPTIONS: tex:dvisvgm +@end example + + +@noindent +or + +@example +#+OPTIONS: tex:imagemagick +@end example + + +Under this option, @LaTeX{} fragments are processed into PNG or SVG +images and the resulting images are embedded in the exported +document. This method requires dvipng program, dvisvgm or +ImageMagick programs. +@end table + +@node MathML and OpenDocument formula files +@subsubsection MathML and OpenDocument formula files + +When embedding @LaTeX{} math snippets in ODT documents is not reliable, +there is one more option to try. Embed an equation by linking to its +MathML (@samp{.mml}) source or its OpenDocument formula (@samp{.odf}) file as +shown below: + +@example +[[./equation.mml]] +@end example + + +@noindent +or + +@example +[[./equation.odf]] +@end example + +@node Labels and captions in ODT export +@subsection Labels and captions in ODT export + +ODT format handles labeling and captioning of objects based on their +types. Inline images, tables, @LaTeX{} fragments, and Math formulas are +numbered and captioned separately. Each object also gets a unique +sequence number based on its order of first appearance in the Org +file. Each category has its own sequence. A caption is just a label +applied to these objects. + +@example +#+CAPTION: Bell curve +#+NAME: fig:SED-HR4049 +[[./img/a.png]] +@end example + +When rendered, it may show as follows in the exported document: + +@example +Figure 2: Bell curve +@end example + + +@vindex org-odt-category-map-alist +To modify the category component of the caption, customize the option +@code{org-odt-category-map-alist}. For example, to tag embedded images +with the string ``Illustration'' instead of the default string ``Figure'', +use the following setting: + +@lisp +(setq org-odt-category-map-alist + '(("__Figure__" "Illustration" "value" "Figure" org-odt--enumerable-image-p))) +@end lisp + +With the above modification, the previous example changes to: + +@example +Illustration 2: Bell curve +@end example + +@node Literal examples in ODT export +@subsection Literal examples in ODT export + +The ODT export back-end supports literal examples (see @ref{Literal Examples}) with full fontification. Internally, the ODT export +back-end relies on @samp{htmlfontify.el} to generate the style definitions +needed for fancy listings. The auto-generated styles get @samp{OrgSrc} +prefix and inherit colors from the faces used by Emacs Font Lock +library for that source language. + +@vindex org-odt-fontify-srcblocks +For custom fontification styles, customize the +@code{org-odt-create-custom-styles-for-srcblocks} option. + +@vindex org-odt-create-custom-styles-for-srcblocks +To turn off fontification of literal examples, customize the +@code{org-odt-fontify-srcblocks} option. + +@node Advanced topics in ODT export +@subsection Advanced topics in ODT export + +The ODT export back-end has extensive features useful for power users +and frequent uses of ODT formats. + +@anchor{Configuring a document converter} +@subsubheading Configuring a document converter + +@cindex convert +@cindex doc, docx, rtf +@cindex converter + +The ODT export back-end works with popular converters with little or +no extra configuration. See @ref{Extending ODT export}. The following is +for unsupported converters or tweaking existing defaults. + +@table @asis +@item Register the converter +@vindex org-export-odt-convert-processes +Add the name of the converter to the @code{org-odt-convert-processes} +variable. Note that it also requires how the converter is invoked +on the command line. See the variable's docstring for details. + +@item Configure its capabilities +@vindex org-export-odt-convert-capabilities +Specify which formats the converter can handle by customizing the +variable @code{org-odt-convert-capabilities}. Use the entry for the +default values in this variable for configuring the new converter. +Also see its docstring for details. + +@item Choose the converter +@vindex org-export-odt-convert-process +Select the newly added converter as the preferred one by customizing +the option @code{org-odt-convert-process}. +@end table + +@anchor{Working with OpenDocument style files} +@subsubheading Working with OpenDocument style files + +@cindex styles, custom +@cindex template, custom + +This section explores the internals of the ODT exporter; the means by which +it produces styled documents; the use of automatic and custom OpenDocument +styles. + +The ODT exporter relies on two files for generating its output. These +files are bundled with the distribution under the directory pointed to +by the variable @code{org-odt-styles-dir}. The two files are: + +@table @asis +@item @samp{OrgOdtStyles.xml} @anchor{x-orgodtstyles-xml} +This file contributes to the @samp{styles.xml} file of the final ODT +document. This file gets modified for the following purposes: + +@enumerate +@item +To control outline numbering based on user settings; + +@item +To add styles generated by @samp{htmlfontify.el} for fontification of +code blocks. +@end enumerate + +@item @samp{OrgOdtContentTemplate.xml} @anchor{x-orgodtcontenttemplate-xml} +This file contributes to the @samp{content.xml} file of the final ODT +document. The contents of the Org outline are inserted between the +@samp{} @dots{} @samp{} elements of this file. + +Apart from serving as a template file for the final @samp{content.xml}, +the file serves the following purposes: + +@enumerate +@item +It contains automatic styles for formatting of tables which are +referenced by the exporter; + +@item +It contains @samp{} @dots{} @samp{} +elements that control numbering of tables, images, equations, and +similar entities. +@end enumerate +@end table + +@anchor{x-overriding-factory-styles} The following two variables control +the location from where the ODT exporter picks up the custom styles +and content template files. Customize these variables to override the +factory styles used by the exporter. + +@table @asis +@item @code{org-odt-styles-file} +The ODT export back-end uses the file pointed to by this variable, +such as @samp{styles.xml}, for the final output. It can take one of the +following values: + +@table @asis +@item @samp{FILE.xml} +Use this file instead of the default @samp{styles.xml} + +@item @samp{FILE.odt} or @samp{FILE.ott} +Use the @samp{styles.xml} contained in the specified OpenDocument +Text or Template file + +@item @samp{FILE.odt} or @samp{FILE.ott} and a subset of included files +Use the @samp{styles.xml} contained in the specified OpenDocument Text +or Template file. Additionally extract the specified member files +and embed those within the final ODT document. + +Use this option if the @samp{styles.xml} file references additional +files like header and footer images. + +@item @code{nil} +Use the default @samp{styles.xml}. +@end table + +@item @code{org-odt-content-template-file} +Use this variable to specify the blank @samp{content.xml} used in the +final output. +@end table + +@anchor{Creating one-off styles} +@subsubheading Creating one-off styles + +The ODT export back-end can read embedded raw OpenDocument XML from +the Org file. Such direct formatting is useful for one-off instances. + +@table @asis +@item Embedding ODT tags as part of regular text +Enclose OpenDocument syntax in @samp{@@@@odt:...@@@@} for inline markup. For +example, to highlight a region of text do the following: + +@example +@@@@odt:This is highlighted +text@@@@. But this is regular text. +@end example + +@strong{Hint:} To see the above example in action, edit the @samp{styles.xml} +(see @ref{x-orgodtstyles-xml, , Factory styles}) and add a custom @emph{Highlight} style as shown +below: + +@example + + + +@end example + +@item Embedding a one-line OpenDocument XML +@cindex @samp{ODT}, keyword +The ODT export back-end can read one-liner options with @samp{#+ODT:} in +the Org file. For example, to force a page break: + +@example +#+ODT: +@end example + +@strong{Hint:} To see the above example in action, edit your +@samp{styles.xml} (see @ref{x-orgodtstyles-xml, , Factory styles}) and add a custom @samp{PageBreak} +style as shown below. + +@example + + + +@end example + +@item Embedding a block of OpenDocument XML +The ODT export back-end can also read ODT export blocks for +OpenDocument XML@. Such blocks use the @samp{#+BEGIN_EXPORT odt} +@dots{} @samp{#+END_EXPORT} constructs. + +For example, to create a one-off paragraph that uses bold text, do +the following: + +@example +#+BEGIN_EXPORT odt + + This paragraph is specially formatted and uses bold text. + +#+END_EXPORT +@end example +@end table + +@anchor{Customizing tables in ODT export} +@subsubheading Customizing tables in ODT export + +@cindex tables, in ODT export +@cindex @samp{ATTR_ODT}, keyword + +Override the default table format by specifying a custom table style +with the @samp{#+ATTR_ODT} line. For a discussion on default formatting of +tables, see @ref{Tables in ODT export}. + +This feature closely mimics the way table templates are defined in the +OpenDocument-v1.2 specification@footnote{@uref{http://docs.oasis-open.org/office/v1.2/OpenDocument-v1.2.html, OpenDocument-v1.2 Specification}}. + +@vindex org-odt-table-styles +For quick preview of this feature, install the settings below and export the +table that follows: + +@lisp +(setq org-export-odt-table-styles + (append org-export-odt-table-styles + '(("TableWithHeaderRowAndColumn" "Custom" + ((use-first-row-styles . t) + (use-first-column-styles . t))) + ("TableWithFirstRowandLastRow" "Custom" + ((use-first-row-styles . t) + (use-last-row-styles . t)))))) +@end lisp + +@example +#+ATTR_ODT: :style TableWithHeaderRowAndColumn +| Name | Phone | Age | +| Peter | 1234 | 17 | +| Anna | 4321 | 25 | +@end example + +The example above used @samp{Custom} template and installed two table +styles @samp{TableWithHeaderRowAndColumn} and +@samp{TableWithFirstRowandLastRow}. @strong{Important:} The OpenDocument styles +needed for producing the above template were pre-defined. They are +available in the section marked @samp{Custom Table Template} in +@samp{OrgOdtContentTemplate.xml} (see @ref{x-orgodtcontenttemplate-xml, , Factory styles}). For adding new +templates, define new styles there. + +To use this feature proceed as follows: + +@enumerate +@item +Create a table template@footnote{See the @samp{} element of the +OpenDocument-v1.2 specification.}. + +A table template is set of @samp{table-cell} and @samp{paragraph} styles for +each of the following table cell categories: + +@itemize +@item +Body +@item +First column +@item +Last column +@item +First row +@item +Last row +@item +Even row +@item +Odd row +@item +Even column +@item +Odd Column +@end itemize + +The names for the above styles must be chosen based on the name of +the table template using a well-defined convention. + +The naming convention is better illustrated with an example. For +a table template with the name @samp{Custom}, the needed style names are +listed in the following table. + +@multitable {aaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@headitem Cell type +@tab Cell style +@tab Paragraph style +@item Body +@tab @samp{CustomTableCell} +@tab @samp{CustomTableParagraph} +@item First column +@tab @samp{CustomFirstColumnTableCell} +@tab @samp{CustomFirstColumnTableParagraph} +@item Last column +@tab @samp{CustomLastColumnTableCell} +@tab @samp{CustomLastColumnTableParagraph} +@item First row +@tab @samp{CustomFirstRowTableCell} +@tab @samp{CustomFirstRowTableParagraph} +@item Last row +@tab @samp{CustomLastRowTableCell} +@tab @samp{CustomLastRowTableParagraph} +@item Even row +@tab @samp{CustomEvenRowTableCell} +@tab @samp{CustomEvenRowTableParagraph} +@item Odd row +@tab @samp{CustomOddRowTableCell} +@tab @samp{CustomOddRowTableParagraph} +@item Even column +@tab @samp{CustomEvenColumnTableCell} +@tab @samp{CustomEvenColumnTableParagraph} +@item Odd column +@tab @samp{CustomOddColumnTableCell} +@tab @samp{CustomOddColumnTableParagraph} +@end multitable + +To create a table template with the name @samp{Custom}, define the above +styles in the @samp{} @dots{} +@samp{} element of the content template file +(see @ref{x-orgodtcontenttemplate-xml, , Factory styles}). + +@item +Define a table style@footnote{See the attributes @samp{table:template-name}, +@samp{table:use-first-row-styles}, @samp{table:use-last-row-styles}, +@samp{table:use-first-column-styles}, @samp{table:use-last-column-styles}, +@samp{table:use-banding-rows-styles}, and @samp{table:use-banding-column-styles} +of the @samp{} element in the OpenDocument-v1.2 specification.}. + +@vindex org-odt-table-styles +To define a table style, create an entry for the style in the +variable @code{org-odt-table-styles} and specify the following: + +@itemize +@item +the name of the table template created in step (1), +@item +the set of cell styles in that template that are to be activated. +@end itemize + +For example, the entry below defines two different table styles +@samp{TableWithHeaderRowAndColumn} and @samp{TableWithFirstRowandLastRow} +based on the same template @samp{Custom}. The styles achieve their +intended effect by selectively activating the individual cell +styles in that template. + +@lisp +(setq org-export-odt-table-styles + (append org-export-odt-table-styles + '(("TableWithHeaderRowAndColumn" "Custom" + ((use-first-row-styles . t) + (use-first-column-styles . t))) + ("TableWithFirstRowandLastRow" "Custom" + ((use-first-row-styles . t) + (use-last-row-styles . t)))))) +@end lisp + +@item +Associate a table with the table style. + +To do this, specify the table style created in step (2) as part of +the @samp{ATTR_ODT} line as shown below. + +@example +#+ATTR_ODT: :style TableWithHeaderRowAndColumn +| Name | Phone | Age | +| Peter | 1234 | 17 | +| Anna | 4321 | 25 | +@end example +@end enumerate + +@anchor{Validating OpenDocument XML} +@subsubheading Validating OpenDocument XML + +Sometimes ODT format files may not open due to @samp{.odt} file corruption. +To verify if such a file is corrupt, validate it against the +OpenDocument Relax NG Compact (RNC) syntax schema. But first the +@samp{.odt} files have to be decompressed using @samp{zip}. Note that @samp{.odt} +files are ZIP archives: @ref{File Archives,,,emacs,}. The contents of +ODT files are in XML@. For general help with validation---and +schema-sensitive editing---of XML files: @ref{Introduction,,,nxml-mode,}. + +@vindex org-export-odt-schema-dir +Customize @code{org-odt-schema-dir} to point to a directory with +OpenDocument RNC files and the needed schema-locating rules. The ODT +export back-end takes care of updating the +@code{rng-schema-locating-files}. + +@node Org Export +@section Org Export + +@cindex Org export +@emph{org} export back-end creates a normalized version of the Org document +in current buffer. The exporter evaluates Babel code (see @ref{Evaluating Code Blocks}) and removes content specific to other back-ends. + +@anchor{Org export commands} +@subheading Org export commands + +@table @asis +@item @kbd{C-c C-e O o} (@code{org-org-export-to-org}) +@kindex C-c C-e O o +@findex org-org-export-to-org +Export as an Org file with a @samp{.org} extension. For @samp{myfile.org}, +Org exports to @samp{myfile.org.org}, overwriting without warning. + +@item @kbd{C-c C-e O v} (~~) +@kindex C-c C-e O v +Export to an Org file, then open it. +@end table + +@node Texinfo Export +@section Texinfo Export + +@menu +* Texinfo export commands:: Invoking commands. +* Texinfo specific export settings:: Setting the environment. +* Texinfo file header:: Generating the header. +* Texinfo title and copyright page:: Creating preamble pages. +* Info directory file:: Installing a manual in Info file hierarchy. +* Headings and sectioning structure:: Building document structure. +* Indices:: Creating indices. +* Quoting Texinfo code:: Incorporating literal Texinfo code. +* Plain lists in Texinfo export:: List attributes. +* Tables in Texinfo export:: Table attributes. +* Images in Texinfo export:: Image attributes. +* Quotations in Texinfo export:: Quote block attributes. +* Special blocks in Texinfo export:: Special block attributes. +* A Texinfo example:: Processing Org to Texinfo. +@end menu + +@node Texinfo export commands +@subsection Texinfo export commands + +@table @asis +@item @kbd{C-c C-e i t} (@code{org-texinfo-export-to-texinfo}) +@kindex C-c C-e i t +@findex org-texinfo-export-to-texinfo +Export as a Texinfo file with @samp{.texi} extension. For @samp{myfile.org}, +Org exports to @samp{myfile.texi}, overwriting without warning. + +@item @kbd{C-c C-e i i} (@code{org-texinfo-export-to-info}) +@kindex C-c C-e i i +@findex org-texinfo-export-to-info +@vindex org-texinfo-info-process +Export to Texinfo format first and then process it to make an Info +file. To generate other formats, such as DocBook, customize the +@code{org-texinfo-info-process} variable. +@end table + +@node Texinfo specific export settings +@subsection Texinfo specific export settings + +The Texinfo export back-end has several additional keywords for +customizing Texinfo output. Setting these keywords works similar to +the general options (see @ref{Export Settings}). + +@table @asis +@item @samp{SUBTITLE} +@cindex @samp{SUBTITLE}, keyword +The document subtitle. + +@item @samp{SUBAUTHOR} +@cindex @samp{SUBAUTHOR}, keyword +Additional authors for the document. + +@item @samp{TEXINFO_FILENAME} +@cindex @samp{TEXINFO_FILENAME}, keyword +The Texinfo filename. + +@item @samp{TEXINFO_CLASS} +@cindex @samp{TEXINFO_CLASS}, keyword +@vindex org-texinfo-default-class +The default document class (@code{org-texinfo-default-class}), which must +be a member of @code{org-texinfo-classes}. + +@item @samp{TEXINFO_HEADER} +@cindex @samp{TEXINFO_HEADER}, keyword +Arbitrary lines inserted at the end of the header. + +@item @samp{TEXINFO_POST_HEADER} +@cindex @samp{TEXINFO_POST_HEADER}, keyword +Arbitrary lines inserted after the end of the header. + +@item @samp{TEXINFO_DIR_CATEGORY} +@cindex @samp{TEXINFO_DIR_CATEGORY}, keyword +The directory category of the document. + +@item @samp{TEXINFO_DIR_TITLE} +@cindex @samp{TEXINFO_DIR_TITLE}, keyword +The directory title of the document. + +@item @samp{TEXINFO_DIR_DESC} +@cindex @samp{TEXINFO_DIR_DESC}, keyword +The directory description of the document. + +@item @samp{TEXINFO_PRINTED_TITLE} +@cindex @samp{TEXINFO_PRINTED_TITLE}, keyword +The printed title of the document. +@end table + +@node Texinfo file header +@subsection Texinfo file header + +@cindex @samp{TEXINFO_FILENAME}, keyword +After creating the header for a Texinfo file, the Texinfo back-end +automatically generates a name and destination path for the Info file. +To override this default with a more sensible path and name, specify +the @samp{TEXINFO_FILENAME} keyword. + +@vindex org-texinfo-coding-system +@cindex @samp{TEXINFO_HEADER}, keyword +Along with the output's file name, the Texinfo header also contains +language details (see @ref{Export Settings}) and encoding system as set in +the @code{org-texinfo-coding-system} variable. Insert @samp{TEXINFO_HEADER} +keywords for each additional command in the header, for example: + +@example +#+TEXINFO_HEADER: @@synindex +@end example + + +@cindex @samp{TEXINFO_CLASS}, keyword +@vindex org-texinfo-classes +Instead of repeatedly installing the same set of commands, define +a class in @code{org-texinfo-classes} once, and then activate it in the +document by setting the @samp{TEXINFO_CLASS} keyword to that class. + +@node Texinfo title and copyright page +@subsection Texinfo title and copyright page + +@cindex @samp{TEXINFO_PRINTED_TITLE}, keyword +The default template for hard copy output has a title page with +@samp{TITLE} and @samp{AUTHOR} keywords (see @ref{Export Settings}). To replace the +regular title with something different for the printed version, use +the @samp{TEXINFO_PRINTED_TITLE} and @samp{SUBTITLE} keywords. Both expect raw +Texinfo code for setting their values. + +@cindex @samp{SUBAUTHOR}, keyword +If one @samp{AUTHOR} line is not sufficient, add multiple @samp{SUBAUTHOR} +keywords. They have to be set in raw Texinfo code. + +@example +#+AUTHOR: Jane Smith +#+SUBAUTHOR: John Doe +#+TEXINFO_PRINTED_TITLE: This Long Title@@@@inlinefmt@{tex,@@*@} Is Broken in @@TeX@{@} +@end example + +@cindex @samp{COPYING}, property +Copying material is defined in a dedicated headline with a non-@code{nil} +@samp{COPYING} property. The back-end inserts the contents within +a @samp{@@copying} command at the beginning of the document. The heading +itself does not appear in the structure of the document. + +Copyright information is printed on the back of the title page. + +@example +* Legalese + :PROPERTIES: + :COPYING: t + :END: + + This is a short example of a complete Texinfo file, version 1.0. + + Copyright \copy 2016 Free Software Foundation, Inc. +@end example + +@node Info directory file +@subsection Info directory file + +@cindex @samp{dir} file, in Texinfo export +@cindex Info directory file, in Texinfo export +@cindex @code{install-info}, in Texinfo export + +@cindex @samp{TEXINFO_DIR_CATEGORY}, keyword +@cindex @samp{TEXINFO_DIR_TITLE}, keyword +@cindex @samp{TEXINFO_DIR_DESC}, keyword +The end result of the Texinfo export process is the creation of an +Info file. This Info file's metadata has variables for category, +title, and description: @samp{TEXINFO_DIR_CATEGORY}, @samp{TEXINFO_DIR_TITLE}, +and @samp{TEXINFO_DIR_DESC} keywords that establish where in the Info +hierarchy the file fits. + +Here is an example that writes to the Info directory file: + +@example +#+TEXINFO_DIR_CATEGORY: Emacs +#+TEXINFO_DIR_TITLE: Org Mode: (org) +#+TEXINFO_DIR_DESC: Outline-based notes management and organizer +@end example + +@node Headings and sectioning structure +@subsection Headings and sectioning structure + +@vindex org-texinfo-classes +@vindex org-texinfo-default-class +@cindex @samp{TEXINFO_CLASS}, keyword +The Texinfo export back-end uses a pre-defined scheme to convert Org +headlines to equivalent Texinfo structuring commands. A scheme like +this maps top-level headlines to numbered chapters tagged as +@code{@@chapter} and lower-level headlines to unnumbered chapters tagged as +@code{@@unnumbered}. To override such mappings to introduce @code{@@part} or +other Texinfo structuring commands, define a new class in +@code{org-texinfo-classes}. Activate the new class with the +@samp{TEXINFO_CLASS} keyword. When no new class is defined and activated, +the Texinfo export back-end defaults to the +@code{org-texinfo-default-class}. + +If an Org headline's level has no associated Texinfo structuring +command, or is below a certain threshold (see @ref{Export Settings}), then +the Texinfo export back-end makes it into a list item. + +@cindex @samp{APPENDIX}, property +The Texinfo export back-end makes any headline with a non-@code{nil} +@samp{APPENDIX} property into an appendix. This happens independent of the +Org headline level or the @samp{TEXINFO_CLASS} keyword. + +@cindex @samp{ALT_TITLE}, property +@cindex @samp{DESCRIPTION}, property +The Texinfo export back-end creates a menu entry after the Org +headline for each regular sectioning structure. To override this with +a shorter menu entry, use the @samp{ALT_TITLE} property (see @ref{Table of Contents}). Texinfo menu entries also have an option for a longer +@samp{DESCRIPTION} property. Here's an example that uses both to override +the default menu entry: + +@example +* Controlling Screen Display + :PROPERTIES: + :ALT_TITLE: Display + :DESCRIPTION: Controlling Screen Display + :END: +@end example + +@cindex Top node, in Texinfo export +The text before the first headline belongs to the @emph{Top} node, i.e., +the node in which a reader enters an Info manual. As such, it is +expected not to appear in printed output generated from the @samp{.texi} +file. See @ref{The Top Node,,,texinfo,}, for more information. + +@node Indices +@subsection Indices + +@cindex @samp{CINDEX}, keyword +@cindex concept index, in Texinfo export +@cindex @samp{FINDEX}, keyword +@cindex function index, in Texinfo export +@cindex @samp{KINDEX}, keyword +@cindex keystroke index, in Texinfo export +@cindex @samp{PINDEX}, keyword +@cindex program index, in Texinfo export +@cindex @samp{TINDEX}, keyword +@cindex data type index, in Texinfo export +@cindex @samp{VINDEX}, keyword +@cindex variable index, in Texinfo export +The Texinfo export back-end recognizes these indexing keywords if used +in the Org file: @samp{CINDEX}, @samp{FINDEX}, @samp{KINDEX}, @samp{PINDEX}, @samp{TINDEX} and +@samp{VINDEX}. Write their value as verbatim Texinfo code; in particular, +@samp{@{}, @samp{@}} and @samp{@@} characters need to be escaped with @samp{@@} if they do not +belong to a Texinfo command. + +@example +#+CINDEX: Defining indexing entries +@end example + + +@cindex @samp{INDEX}, property +For the back-end to generate an index entry for a headline, set the +@samp{INDEX} property to @samp{cp} or @samp{vr}. These abbreviations come from +Texinfo that stand for concept index and variable index. The Texinfo +manual has abbreviations for all other kinds of indexes. The back-end +exports the headline as an unnumbered chapter or section command, and +then inserts the index after its contents. + +@example +* Concept Index + :PROPERTIES: + :INDEX: cp + :END: +@end example + +@node Quoting Texinfo code +@subsection Quoting Texinfo code + +Use any of the following three methods to insert or escape raw Texinfo +code: + +@cindex @samp{TEXINFO}, keyword +@cindex @samp{BEGIN_EXPORT texinfo} +@example +Richard @@@@texinfo:@@sc@{@@@@Stallman@@@@texinfo:@}@@@@ commence' GNU. + +#+TEXINFO: @@need800 +This paragraph is preceded by... + +#+BEGIN_EXPORT texinfo + @@auindex Johnson, Mark + @@auindex Lakoff, George +#+END_EXPORT +@end example + +@node Plain lists in Texinfo export +@subsection Plain lists in Texinfo export + +@cindex @samp{ATTR_TEXINFO}, keyword +@cindex two-column tables, in Texinfo export +@cindex table-type, Texinfo attribute +The Texinfo export back-end by default converts description lists in +the Org file using the default command @samp{@@table}, which results in +a table with two columns. To change this behavior, set @samp{:table-type} +attribute to either @samp{ftable} or @samp{vtable} value. For more information, +see @ref{Two-column Tables,,,texinfo,}. + +@vindex org-texinfo-table-default-markup +@cindex indic, Texinfo attribute +The Texinfo export back-end by default also applies a text highlight +based on the defaults stored in @code{org-texinfo-table-default-markup}. +To override the default highlight command, specify another one with +the @samp{:indic} attribute. + +@cindex multiple items in Texinfo lists +@cindex sep, Texinfo attribute +Org syntax is limited to one entry per list item. Nevertheless, the +Texinfo export back-end can split that entry according to any text +provided through the @samp{:sep} attribute. Each part then becomes a new +entry in the first column of the table. + +The following example illustrates all the attributes above: + +@example +#+ATTR_TEXINFO: :table-type vtable :sep , :indic asis +- foo, bar :: This is the common text for variables foo and bar. +@end example + +@noindent +becomes + +@example +@@vtable @@asis +@@item foo +@@itemx bar +This is the common text for variables foo and bar. +@@end table +@end example + +@cindex lettered lists, in Texinfo export +@cindex enum, Texinfo attribute +Ordered lists are numbered when exported to Texinfo format. Such +numbering obeys any counter (see @ref{Plain Lists}) in the first item of +the list. The @samp{:enum} attribute also let you start the list at +a specific number, or switch to a lettered list, as illustrated here + +@example +#+ATTR_TEXINFO: :enum A +1. Alpha +2. Bravo +3. Charlie +@end example + +@node Tables in Texinfo export +@subsection Tables in Texinfo export + +@cindex @samp{ATTR_TEXINFO}, keyword +When exporting tables, the Texinfo export back-end uses the widest +cell width in each column. To override this and instead specify as +fractions of line length, use the @samp{:columns} attribute. See example +below. + +@example +#+ATTR_TEXINFO: :columns .5 .5 +| a cell | another cell | +@end example + +@node Images in Texinfo export +@subsection Images in Texinfo export + +@cindex @samp{ATTR_TEXINFO}, keyword +Insert a file link to the image in the Org file, and the Texinfo +export back-end inserts the image. These links must have the usual +supported image extensions and no descriptions. To scale the image, +use @samp{:width} and @samp{:height} attributes. For alternate text, use @samp{:alt} +and specify the text using Texinfo code, as shown in the example: + +@example +#+ATTR_TEXINFO: :width 1in :alt Alternate @@i@{text@} +[[ridt.pdf]] +@end example + +@node Quotations in Texinfo export +@subsection Quotations in Texinfo export + +@cindex @samp{ATTR_TEXINFO}, keyword +You can write the text of a quotation within a quote block (see +@ref{Paragraphs}). You may also emphasize some text at the beginning of +the quotation with the @samp{:tag} attribute. + +@example +#+ATTR_TEXINFO: :tag Warning +#+BEGIN_QUOTE +Striking your thumb with a hammer may cause severe pain and discomfort. +#+END_QUOTE +@end example + +To specify the author of the quotation, use the @samp{:author} attribute. + +@example +#+ATTR_TEXINFO: :author King Arthur +#+BEGIN_QUOTE +The Lady of the Lake, her arm clad in the purest shimmering samite, +held aloft Excalibur from the bosom of the water, signifying by divine +providence that I, Arthur, was to carry Excalibur. That is why I am +your king. +#+END_QUOTE +@end example + +@node Special blocks in Texinfo export +@subsection Special blocks in Texinfo export + +@cindex @samp{ATTR_TEXINFO}, keyword + +The Texinfo export back-end converts special blocks to commands with +the same name. It also adds any @samp{:options} attributes to the end of +the command, as shown in this example: + +@example +#+ATTR_TEXINFO: :options org-org-export-to-org ... +#+BEGIN_defun + A somewhat obsessive function name. +#+END_defun +@end example + +@noindent +becomes + +@example +@@defun org-org-export-to-org ... + A somewhat obsessive function name. +@@end defun +@end example + +@node A Texinfo example +@subsection A Texinfo example + +Here is a more detailed example Org file. See +@ref{GNU Sample Texts,,,texinfo,} for an equivalent example using +Texinfo code. + +@example +#+TITLE: GNU Sample @{@{@{version@}@}@} +#+SUBTITLE: for version @{@{@{version@}@}@}, @{@{@{updated@}@}@} +#+AUTHOR: A.U. Thor +#+EMAIL: bug-sample@@gnu.org + +#+OPTIONS: ':t toc:t author:t email:t +#+LANGUAGE: en + +#+MACRO: version 2.0 +#+MACRO: updated last updated 4 March 2014 + +#+TEXINFO_FILENAME: sample.info +#+TEXINFO_HEADER: @@syncodeindex pg cp + +#+TEXINFO_DIR_CATEGORY: Texinfo documentation system +#+TEXINFO_DIR_TITLE: sample: (sample) +#+TEXINFO_DIR_DESC: Invoking sample + +#+TEXINFO_PRINTED_TITLE: GNU Sample + +This manual is for GNU Sample (version @{@{@{version@}@}@}, +@{@{@{updated@}@}@}). + +* Copying + :PROPERTIES: + :COPYING: t + :END: + + This manual is for GNU Sample (version @{@{@{version@}@}@}, + @{@{@{updated@}@}@}), which is an example in the Texinfo documentation. + + Copyright \copy 2016 Free Software Foundation, Inc. + + #+BEGIN_QUOTE + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.3 or any later version published by the Free Software + Foundation; with no Invariant Sections, with no Front-Cover Texts, + and with no Back-Cover Texts. A copy of the license is included in + the section entitled "GNU Free Documentation License". + #+END_QUOTE + +* Invoking sample + + #+PINDEX: sample + #+CINDEX: invoking @@command@{sample@} + + This is a sample manual. There is no sample program to invoke, but + if there were, you could see its basic usage and command line + options here. + +* GNU Free Documentation License + :PROPERTIES: + :APPENDIX: t + :END: + + #+INCLUDE: fdl.org + +* Index + :PROPERTIES: + :INDEX: cp + :END: +@end example + +@node iCalendar Export +@section iCalendar Export + +@cindex iCalendar export + +A large part of Org mode's interoperability success is its ability to +easily export to or import from external applications. The iCalendar +export back-end takes calendar data from Org files and exports to the +standard iCalendar format. + +@vindex org-icalendar-include-todo +@vindex org-icalendar-use-deadline +@vindex org-icalendar-use-scheduled +The iCalendar export back-end can also incorporate TODO entries based +on the configuration of the @code{org-icalendar-include-todo} variable. +The back-end exports plain timestamps as @samp{VEVENT}, TODO items as +@samp{VTODO}, and also create events from deadlines that are in non-TODO +items. The back-end uses the deadlines and scheduling dates in Org +TODO items for setting the start and due dates for the iCalendar TODO +entry. Consult the @code{org-icalendar-use-deadline} and +@code{org-icalendar-use-scheduled} variables for more details. + +@vindex org-icalendar-categories +@vindex org-icalendar-alarm-time +For tags on the headline, the iCalendar export back-end makes them +into iCalendar categories. To tweak the inheritance of tags and TODO +states, configure the variable @code{org-icalendar-categories}. To assign +clock alarms based on time, configure the @code{org-icalendar-alarm-time} +variable. + +@vindex org-icalendar-store-UID +@cindex @samp{ID}, property +The iCalendar format standard requires globally unique identifier---or +UID---for each entry. The iCalendar export back-end creates UIDs +during export. To save a copy of the UID in the Org file set the +variable @code{org-icalendar-store-UID}. The back-end looks for the @samp{ID} +property of the entry for re-using the same UID for subsequent +exports. + +Since a single Org entry can result in multiple iCalendar +entries---timestamp, deadline, scheduled item, or TODO item---Org adds +prefixes to the UID, depending on which part of the Org entry +triggered the creation of the iCalendar entry. Prefixing ensures UIDs +remains unique, yet enable synchronization programs trace the +connections. + +@table @asis +@item @kbd{C-c C-e c f} (@code{org-icalendar-export-to-ics}) +@kindex C-c C-e c f +@findex org-icalendar-export-to-ics +Create iCalendar entries from the current Org buffer and store them +in the same directory, using a file extension @samp{.ics}. + +@item @kbd{C-c C-e c a} (@code{org-icalendar-export-agenda-files}) +@kindex C-c C-e c a +@findex org-icalendar-export-agenda-files +Create iCalendar entries from Org files in @code{org-agenda-files} and +store in a separate iCalendar file for each Org file. + +@item @kbd{C-c C-e c c} (@code{org-icalendar-combine-agenda-files}) +@kindex C-c C-e c c +@findex org-icalendar-combine-agenda-files +@vindex org-icalendar-combined-agenda-file +Create a combined iCalendar file from Org files in +@code{org-agenda-files} and write it to +@code{org-icalendar-combined-agenda-file} file name. +@end table + +@cindex @samp{SUMMARY}, property +@cindex @samp{DESCRIPTION}, property +@cindex @samp{LOCATION}, property +@cindex @samp{TIMEZONE}, property +@cindex @samp{CLASS}, property +The iCalendar export back-end includes @samp{SUMMARY}, @samp{DESCRIPTION}, +@samp{LOCATION}, @samp{TIMEZONE} and @samp{CLASS} properties from the Org entries +when exporting. To force the back-end to inherit the @samp{LOCATION}, +@samp{TIMEZONE} and @samp{CLASS} properties, configure the +@code{org-use-property-inheritance} variable. + +@vindex org-icalendar-include-body +When Org entries do not have @samp{SUMMARY}, @samp{DESCRIPTION}, @samp{LOCATION} and +@samp{CLASS} properties, the iCalendar export back-end derives the summary +from the headline, and derives the description from the body of the +Org item. The @code{org-icalendar-include-body} variable limits the +maximum number of characters of the content are turned into its +description. + +The @samp{TIMEZONE} property can be used to specify a per-entry time zone, +and is applied to any entry with timestamp information. Time zones +should be specified as per the IANA time zone database format, e.g., +@samp{Asia/Almaty}. Alternately, the property value can be @samp{UTC}, to force +UTC time for this entry only. + +The @samp{CLASS} property can be used to specify a per-entry visibility +class or access restrictions, and is applied to any entry with class +information. The iCalendar standard defines three visibility classes: +@table @asis +@item @samp{PUBLIC} +The entry is publicly visible (this is the default). +@item @samp{CONFIDENTIAL} +Only a limited group of clients get access to the +event. +@item @samp{PRIVATE} +The entry can be retrieved only by its owner. +@end table +The server should treat unknown class properties the same as +@samp{PRIVATE}. + +Exporting to iCalendar format depends in large part on the +capabilities of the destination application. Some are more lenient +than others. Consult the Org mode FAQ for advice on specific +applications. + +@node Other Built-in Back-ends +@section Other Built-in Back-ends + +Other export back-ends included with Org are: + +@itemize +@item +@samp{ox-man.el}: Export to a man page. +@end itemize + +To activate such back-ends, either customize @code{org-export-backends} or +load directly with @samp{(require 'ox-man)}. On successful load, the +back-end adds new keys in the export dispatcher (see @ref{The Export Dispatcher}). + +Follow the comment section of such files, for example, @samp{ox-man.el}, +for usage and configuration details. + +@node Advanced Export Configuration +@section Advanced Export Configuration + + + +@anchor{Export hooks} +@subheading Export hooks + +@vindex org-export-before-processing-hook +@vindex org-export-before-parsing-hook +The export process executes two hooks before the actual exporting +begins. The first hook, @code{org-export-before-processing-hook}, runs +before any expansions of macros, Babel code, and include keywords in +the buffer. The second hook, @code{org-export-before-parsing-hook}, runs +before the buffer is parsed. + +Functions added to these hooks are called with a single argument: the +export back-end actually used, as a symbol. You may use them for +heavy duty structural modifications of the document. For example, you +can remove every headline in the buffer during export like this: + +@lisp +(defun my-headline-removal (backend) + "Remove all headlines in the current buffer. +BACKEND is the export back-end being used, as a symbol." + (org-map-entries + (lambda () (delete-region (point) (line-beginning-position 2))))) + +(add-hook 'org-export-before-parsing-hook #'my-headline-removal) +@end lisp + +@anchor{Filters} +@subheading Filters + +@cindex Filters, exporting +Filters are lists of functions to be applied to certain parts for +a given back-end. The output from the first function in the filter is +passed on to the next function in the filter. The final output is the +output from the final function in the filter. + +The Org export process has many filter sets applicable to different +types of objects, plain text, parse trees, export options, and final +output formats. The filters are named after the element type or +object type: @code{org-export-filter-TYPE-functions}, where @var{TYPE} +is the type targeted by the filter. Valid types are: + +@multitable @columnfractions 0.33 0.33 0.33 +@item body +@tab bold +@tab babel-call +@item center-block +@tab clock +@tab code +@item diary-sexp +@tab drawer +@tab dynamic-block +@item entity +@tab example-block +@tab export-block +@item export-snippet +@tab final-output +@tab fixed-width +@item footnote-definition +@tab footnote-reference +@tab headline +@item horizontal-rule +@tab inline-babel-call +@tab inline-src-block +@item inlinetask +@tab italic +@tab item +@item keyword +@tab latex-environment +@tab latex-fragment +@item line-break +@tab link +@tab node-property +@item options +@tab paragraph +@tab parse-tree +@item plain-list +@tab plain-text +@tab planning +@item property-drawer +@tab quote-block +@tab radio-target +@item section +@tab special-block +@tab src-block +@item statistics-cookie +@tab strike-through +@tab subscript +@item superscript +@tab table +@tab table-cell +@item table-row +@tab target +@tab timestamp +@item underline +@tab verbatim +@tab verse-block +@end multitable + +Here is an example filter that replaces non-breaking spaces @code{ } in the +Org buffer with @samp{~} for the @LaTeX{} back-end. + +@lisp +(defun my-latex-filter-nobreaks (text backend info) + "Ensure \" \" are properly handled in LaTeX export." + (when (org-export-derived-backend-p backend 'latex) + (replace-regexp-in-string " " "~" text))) + +(add-to-list 'org-export-filter-plain-text-functions + 'my-latex-filter-nobreaks) +@end lisp + +A filter requires three arguments: the code to be transformed, the +name of the back-end, and some optional information about the export +process. The third argument can be safely ignored. Note the use of +@code{org-export-derived-backend-p} predicate that tests for @emph{latex} +back-end or any other back-end, such as @emph{beamer}, derived from +@emph{latex}. + +@anchor{Defining filters for individual files} +@subheading Defining filters for individual files + +The Org export can filter not just for back-ends, but also for +specific files through the @samp{BIND} keyword. Here is an example with +two filters; one removes brackets from time stamps, and the other +removes strike-through text. The filter functions are defined in +a code block in the same Org file, which is a handy location for +debugging. + +@example +#+BIND: org-export-filter-timestamp-functions (tmp-f-timestamp) +#+BIND: org-export-filter-strike-through-functions (tmp-f-strike-through) +#+BEGIN_SRC emacs-lisp :exports results :results none + (defun tmp-f-timestamp (s backend info) + (replace-regexp-in-string "&[lg]t;\\|[][]" "" s)) + (defun tmp-f-strike-through (s backend info) "") +#+END_SRC +@end example + +@anchor{Extending an existing back-end} +@subheading Extending an existing back-end + +Some parts of the conversion process can be extended for certain +elements so as to introduce a new or revised translation. That is how +the HTML export back-end was extended to handle Markdown format. The +extensions work seamlessly so any aspect of filtering not done by the +extended back-end is handled by the original back-end. Of all the +export customization in Org, extending is very powerful as it operates +at the parser level. + +For this example, make the @emph{ascii} back-end display the language used +in a source code block. Also make it display only when some attribute +is non-@code{nil}, like the following: + +@example +#+ATTR_ASCII: :language t +@end example + + +Then extend ASCII back-end with a custom ``my-ascii'' back-end. + +@lisp +(defun my-ascii-src-block (src-block contents info) + "Transcode a SRC-BLOCK element from Org to ASCII. +CONTENTS is nil. INFO is a plist used as a communication +channel." + (if (not (org-export-read-attribute :attr_ascii src-block :language)) + (org-export-with-backend 'ascii src-block contents info) + (concat + (format ",--[ %s ]--\n%s`----" + (org-element-property :language src-block) + (replace-regexp-in-string + "^" "| " + (org-element-normalize-string + (org-export-format-code-default src-block info))))))) + +(org-export-define-derived-backend 'my-ascii 'ascii + :translate-alist '((src-block . my-ascii-src-block))) +@end lisp + +The @code{my-ascii-src-block} function looks at the attribute above the +current element. If not true, hands over to @emph{ascii} back-end. If +true, which it is in this example, it creates a box around the code +and leaves room for the inserting a string for language. The last +form creates the new back-end that springs to action only when +translating @code{src-block} type elements. + +To use the newly defined back-end, evaluate the following from an Org +buffer: + +@lisp +(org-export-to-buffer 'my-ascii "*Org MY-ASCII Export*") +@end lisp + +Further steps to consider would be an interactive function, +self-installing an item in the export dispatcher menu, and other +user-friendly improvements. + +@node Export in Foreign Buffers +@section Export in Foreign Buffers + +The export back-ends in Org often include commands to convert selected +regions. A convenient feature of this in-place conversion is that the +exported output replaces the original source. Here are such +functions: + +@table @asis +@item @code{org-ascii-convert-region-to-ascii} +@findex org-ascii-convert-region-to-ascii +Convert the selected region into ASCII@. + +@item @code{org-ascii-convert-region-to-utf8} +@findex org-ascii-convert-region-to-utf8 +Convert the selected region into UTF-8. + +@item @code{org-html-convert-region-to-html} +@findex org-html-convert-region-to-html +Convert the selected region into HTML@. + +@item @code{org-latex-convert-region-to-latex} +@findex org-latex-convert-region-to-latex +Convert the selected region into @LaTeX{}. + +@item @code{org-texinfo-convert-region-to-texinfo} +@findex org-texinfo-convert-region-to-texinfo +Convert the selected region into Texinfo. + +@item @code{org-md-convert-region-to-md} +@findex org-md-convert-region-to-md +Convert the selected region into Markdown. +@end table + +In-place conversions are particularly handy for quick conversion of +tables and lists in foreign buffers. For example, in an HTML buffer, +write a list in Org syntax, select it, and convert it to HTML with +@kbd{M-x org-html-convert-region-to-html}. + +@menu +* Bare HTML:: Exporting HTML without CSS, Javascript, etc. +@end menu + +@node Bare HTML +@subsection Exporting to minimal HTML + +If you want to output a minimal HTML file, with no CSS, no Javascript, +no preamble or postamble, here are the variable you would need to set: + +@vindex org-html-head +@vindex org-html-head-extra +@vindex org-html-head-include-default-style +@vindex org-html-head-include-scripts +@vindex org-html-preamble +@vindex org-html-postamble +@vindex org-html-use-infojs +@lisp +(setq org-html-head "" + org-html-head-extra "" + org-html-head-include-default-style nil + org-html-head-include-scripts nil + org-html-preamble nil + org-html-postamble nil + org-html-use-infojs nil) +@end lisp + +@node Publishing +@chapter Publishing + +@cindex publishing + +Org includes a publishing management system that allows you to +configure automatic HTML conversion of @emph{projects} composed of +interlinked Org files. You can also configure Org to automatically +upload your exported HTML pages and related attachments, such as +images and source code files, to a web server. + +You can also use Org to convert files into PDF, or even combine HTML +and PDF conversion so that files are available in both formats on the +server. + +Publishing has been contributed to Org by David O'Toole. + +@menu +* Configuration:: Defining projects. +* Uploading Files:: How to get files up on the server. +* Sample Configuration:: Example projects. +* Triggering Publication:: Publication commands. +@end menu + +@node Configuration +@section Configuration + +Publishing needs significant configuration to specify files, +destination and many other properties of a project. + +@menu +* Project alist:: The central configuration variable. +* Sources and destinations:: From here to there. +* Selecting files:: What files are part of the project? +* Publishing action:: Setting the function doing the publishing. +* Publishing options:: Tweaking HTML/@LaTeX{} export. +* Publishing links:: Which links keep working after publishing? +* Site map:: Generating a list of all pages. +* Generating an index:: An index that reaches across pages. +@end menu + +@node Project alist +@subsection The variable @code{org-publish-project-alist} + +@cindex projects, for publishing + +@vindex org-publish-project-alist +Publishing is configured almost entirely through setting the value of +one variable, called @code{org-publish-project-alist}. Each element of the +list configures one project, and may be in one of the two following +forms: + +@lisp +("project-name" :property value :property value ...) +@end lisp + +@noindent +i.e., a well-formed property list with alternating keys and values, +or: + +@lisp +("project-name" :components ("project-name" "project-name" ...)) +@end lisp + +In both cases, projects are configured by specifying property values. +A project defines the set of files that are to be published, as well +as the publishing configuration to use when publishing those files. +When a project takes the second form listed above, the individual +members of the @code{:components} property are taken to be sub-projects, +which group together files requiring different publishing options. +When you publish such a ``meta-project'', all the components are also +published, in the sequence given. + +@node Sources and destinations +@subsection Sources and destinations for files + +@cindex directories, for publishing + +Most properties are optional, but some should always be set. In +particular, Org needs to know where to look for source files, and +where to put published files. + +@table @asis +@item @code{:base-directory} +Directory containing publishing source files. + +@item @code{:publishing-directory} +Directory where output files are published. You can directly +publish to a webserver using a file name syntax appropriate for the +Emacs tramp package. Or you can publish to a local directory and +use external tools to upload your website (see @ref{Uploading Files}). + +@item @code{:preparation-function} +Function or list of functions to be called before starting the +publishing process, for example, to run @samp{make} for updating files to +be published. Each preparation function is called with a single +argument, the project property list. + +@item @code{:completion-function} +Function or list of functions called after finishing the publishing +process, for example, to change permissions of the resulting files. +Each completion function is called with a single argument, the +project property list. +@end table + +@node Selecting files +@subsection Selecting files + +@cindex files, selecting for publishing + +By default, all files with extension @samp{.org} in the base directory are +considered part of the project. This can be modified by setting the +following properties + +@table @asis +@item @code{:base-extension} +Extension---without the dot---of source files. This actually is +a regular expression. Set this to the symbol @code{any} if you want to +get all files in @code{:base-directory}, even without extension. + +@item @code{:exclude} +Regular expression to match file names that should not be published, +even though they have been selected on the basis of their extension. + +@item @code{:include} +List of files to be included regardless of @code{:base-extension} and +@code{:exclude}. + +@item @code{:recursive} +Non-@code{nil} means, check base-directory recursively for files to +publish. +@end table + +@node Publishing action +@subsection Publishing action + +@cindex action, for publishing + +Publishing means that a file is copied to the destination directory +and possibly transformed in the process. The default transformation +is to export Org files as HTML files, and this is done by the function +@code{org-html-publish-to-html} which calls the HTML exporter (see @ref{HTML Export}). But you can also publish your content as PDF files using +@code{org-latex-publish-to-pdf}, or as ASCII, Texinfo, etc., using the +corresponding functions. + +If you want to publish the Org file as an @samp{.org} file but with +@emph{archived}, @emph{commented}, and @emph{tag-excluded} trees removed, use +@code{org-org-publish-to-org}. This produces @samp{file.org} and puts it in the +publishing directory. If you want a htmlized version of this file, +set the parameter @code{:htmlized-source} to @code{t}. It produces +@samp{file.org.html} in the publishing directory@footnote{If the publishing directory is the same as the source +directory, @samp{file.org} is exported as @samp{file.org.org}, so you probably +do not want to do this.}. + +Other files like images only need to be copied to the publishing +destination; for this you can use @code{org-publish-attachment}. For +non-Org files, you always need to specify the publishing function: + +@table @asis +@item @code{:publishing-function} +Function executing the publication of a file. This may also be +a list of functions, which are all called in turn. + +@item @code{:htmlized-source} +Non-@code{nil} means, publish htmlized source. +@end table + +The function must accept three arguments: a property list containing +at least a @code{:publishing-directory} property, the name of the file to +be published, and the path to the publishing directory of the output +file. It should take the specified file, make the necessary +transformation, if any, and place the result into the destination +folder. + +@node Publishing options +@subsection Options for the exporters + +@cindex options, for publishing +@cindex publishing options + +The property list can be used to set many export options for the HTML +and @LaTeX{} exporters. In most cases, these properties correspond to +user variables in Org. The table below lists these properties along +with the variable they belong to. See the documentation string for +the respective variable for details. + +@vindex org-publish-project-alist +When a property is given a value in @code{org-publish-project-alist}, its +setting overrides the value of the corresponding user variable, if +any, during publishing. Options set within a file (see @ref{Export Settings}), however, override everything. + +@anchor{Generic properties} +@subsubheading Generic properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:archived-trees} +@tab @code{org-export-with-archived-trees} +@item @code{:exclude-tags} +@tab @code{org-export-exclude-tags} +@item @code{:headline-levels} +@tab @code{org-export-headline-levels} +@item @code{:language} +@tab @code{org-export-default-language} +@item @code{:preserve-breaks} +@tab @code{org-export-preserve-breaks} +@item @code{:section-numbers} +@tab @code{org-export-with-section-numbers} +@item @code{:select-tags} +@tab @code{org-export-select-tags} +@item @code{:with-author} +@tab @code{org-export-with-author} +@item @code{:with-broken-links} +@tab @code{org-export-with-broken-links} +@item @code{:with-clocks} +@tab @code{org-export-with-clocks} +@item @code{:with-creator} +@tab @code{org-export-with-creator} +@item @code{:with-date} +@tab @code{org-export-with-date} +@item @code{:with-drawers} +@tab @code{org-export-with-drawers} +@item @code{:with-email} +@tab @code{org-export-with-email} +@item @code{:with-emphasize} +@tab @code{org-export-with-emphasize} +@item @code{:with-fixed-width} +@tab @code{org-export-with-fixed-width} +@item @code{:with-footnotes} +@tab @code{org-export-with-footnotes} +@item @code{:with-latex} +@tab @code{org-export-with-latex} +@item @code{:with-planning} +@tab @code{org-export-with-planning} +@item @code{:with-priority} +@tab @code{org-export-with-priority} +@item @code{:with-properties} +@tab @code{org-export-with-properties} +@item @code{:with-special-strings} +@tab @code{org-export-with-special-strings} +@item @code{:with-sub-superscript} +@tab @code{org-export-with-sub-superscripts} +@item @code{:with-tables} +@tab @code{org-export-with-tables} +@item @code{:with-tags} +@tab @code{org-export-with-tags} +@item @code{:with-tasks} +@tab @code{org-export-with-tasks} +@item @code{:with-timestamps} +@tab @code{org-export-with-timestamps} +@item @code{:with-title} +@tab @code{org-export-with-title} +@item @code{:with-toc} +@tab @code{org-export-with-toc} +@item @code{:with-todo-keywords} +@tab @code{org-export-with-todo-keywords} +@end multitable + +@anchor{ASCII specific properties} +@subsubheading ASCII specific properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:ascii-bullets} +@tab @code{org-ascii-bullets} +@item @code{:ascii-caption-above} +@tab @code{org-ascii-caption-above} +@item @code{:ascii-charset} +@tab @code{org-ascii-charset} +@item @code{:ascii-global-margin} +@tab @code{org-ascii-global-margin} +@item @code{:ascii-format-drawer-function} +@tab @code{org-ascii-format-drawer-function} +@item @code{:ascii-format-inlinetask-function} +@tab @code{org-ascii-format-inlinetask-function} +@item @code{:ascii-headline-spacing} +@tab @code{org-ascii-headline-spacing} +@item @code{:ascii-indented-line-width} +@tab @code{org-ascii-indented-line-width} +@item @code{:ascii-inlinetask-width} +@tab @code{org-ascii-inlinetask-width} +@item @code{:ascii-inner-margin} +@tab @code{org-ascii-inner-margin} +@item @code{:ascii-links-to-notes} +@tab @code{org-ascii-links-to-notes} +@item @code{:ascii-list-margin} +@tab @code{org-ascii-list-margin} +@item @code{:ascii-paragraph-spacing} +@tab @code{org-ascii-paragraph-spacing} +@item @code{:ascii-quote-margin} +@tab @code{org-ascii-quote-margin} +@item @code{:ascii-table-keep-all-vertical-lines} +@tab @code{org-ascii-table-keep-all-vertical-lines} +@item @code{:ascii-table-use-ascii-art} +@tab @code{org-ascii-table-use-ascii-art} +@item @code{:ascii-table-widen-columns} +@tab @code{org-ascii-table-widen-columns} +@item @code{:ascii-text-width} +@tab @code{org-ascii-text-width} +@item @code{:ascii-underline} +@tab @code{org-ascii-underline} +@item @code{:ascii-verbatim-format} +@tab @code{org-ascii-verbatim-format} +@end multitable + +@anchor{Beamer specific properties} +@subsubheading Beamer specific properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:beamer-theme} +@tab @code{org-beamer-theme} +@item @code{:beamer-column-view-format} +@tab @code{org-beamer-column-view-format} +@item @code{:beamer-environments-extra} +@tab @code{org-beamer-environments-extra} +@item @code{:beamer-frame-default-options} +@tab @code{org-beamer-frame-default-options} +@item @code{:beamer-outline-frame-options} +@tab @code{org-beamer-outline-frame-options} +@item @code{:beamer-outline-frame-title} +@tab @code{org-beamer-outline-frame-title} +@item @code{:beamer-subtitle-format} +@tab @code{org-beamer-subtitle-format} +@end multitable + +@anchor{HTML specific properties} +@subsubheading HTML specific properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:html-allow-name-attribute-in-anchors} +@tab @code{org-html-allow-name-attribute-in-anchors} +@item @code{:html-checkbox-type} +@tab @code{org-html-checkbox-type} +@item @code{:html-container} +@tab @code{org-html-container-element} +@item @code{:html-divs} +@tab @code{org-html-divs} +@item @code{:html-doctype} +@tab @code{org-html-doctype} +@item @code{:html-extension} +@tab @code{org-html-extension} +@item @code{:html-footnote-format} +@tab @code{org-html-footnote-format} +@item @code{:html-footnote-separator} +@tab @code{org-html-footnote-separator} +@item @code{:html-footnotes-section} +@tab @code{org-html-footnotes-section} +@item @code{:html-format-drawer-function} +@tab @code{org-html-format-drawer-function} +@item @code{:html-format-headline-function} +@tab @code{org-html-format-headline-function} +@item @code{:html-format-inlinetask-function} +@tab @code{org-html-format-inlinetask-function} +@item @code{:html-head-extra} +@tab @code{org-html-head-extra} +@item @code{:html-head-include-default-style} +@tab @code{org-html-head-include-default-style} +@item @code{:html-head-include-scripts} +@tab @code{org-html-head-include-scripts} +@item @code{:html-head} +@tab @code{org-html-head} +@item @code{:html-home/up-format} +@tab @code{org-html-home/up-format} +@item @code{:html-html5-fancy} +@tab @code{org-html-html5-fancy} +@item @code{:html-indent} +@tab @code{org-html-indent} +@item @code{:html-infojs-options} +@tab @code{org-html-infojs-options} +@item @code{:html-infojs-template} +@tab @code{org-html-infojs-template} +@item @code{:html-inline-image-rules} +@tab @code{org-html-inline-image-rules} +@item @code{:html-inline-images} +@tab @code{org-html-inline-images} +@item @code{:html-link-home} +@tab @code{org-html-link-home} +@item @code{:html-link-org-files-as-html} +@tab @code{org-html-link-org-files-as-html} +@item @code{:html-link-up} +@tab @code{org-html-link-up} +@item @code{:html-link-use-abs-url} +@tab @code{org-html-link-use-abs-url} +@item @code{:html-mathjax-options} +@tab @code{org-html-mathjax-options} +@item @code{:html-mathjax-template} +@tab @code{org-html-mathjax-template} +@item @code{:html-equation-reference-format} +@tab @code{org-html-equation-reference-format} +@item @code{:html-metadata-timestamp-format} +@tab @code{org-html-metadata-timestamp-format} +@item @code{:html-postamble-format} +@tab @code{org-html-postamble-format} +@item @code{:html-postamble} +@tab @code{org-html-postamble} +@item @code{:html-preamble-format} +@tab @code{org-html-preamble-format} +@item @code{:html-preamble} +@tab @code{org-html-preamble} +@item @code{:html-self-link-headlines} +@tab @code{org-html-self-link-headlines} +@item @code{:html-table-align-individual-field} +@tab @code{de@{org-html-table-align-individual-fields} +@item @code{:html-table-attributes} +@tab @code{org-html-table-default-attributes} +@item @code{:html-table-caption-above} +@tab @code{org-html-table-caption-above} +@item @code{:html-table-data-tags} +@tab @code{org-html-table-data-tags} +@item @code{:html-table-header-tags} +@tab @code{org-html-table-header-tags} +@item @code{:html-table-row-tags} +@tab @code{org-html-table-row-tags} +@item @code{:html-table-use-header-tags-for-first-column} +@tab @code{org-html-table-use-header-tags-for-first-column} +@item @code{:html-tag-class-prefix} +@tab @code{org-html-tag-class-prefix} +@item @code{:html-text-markup-alist} +@tab @code{org-html-text-markup-alist} +@item @code{:html-todo-kwd-class-prefix} +@tab @code{org-html-todo-kwd-class-prefix} +@item @code{:html-toplevel-hlevel} +@tab @code{org-html-toplevel-hlevel} +@item @code{:html-use-infojs} +@tab @code{org-html-use-infojs} +@item @code{:html-validation-link} +@tab @code{org-html-validation-link} +@item @code{:html-viewport} +@tab @code{org-html-viewport} +@item @code{:html-wrap-src-lines} +@tab @code{org-html-wrap-src-lines} +@item @code{:html-xml-declaration} +@tab @code{org-html-xml-declaration} +@end multitable + +@anchor{@LaTeX{} specific properties} +@subsubheading @LaTeX{} specific properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:latex-active-timestamp-format} +@tab @code{org-latex-active-timestamp-format} +@item @code{:latex-caption-above} +@tab @code{org-latex-caption-above} +@item @code{:latex-classes} +@tab @code{org-latex-classes} +@item @code{:latex-class} +@tab @code{org-latex-default-class} +@item @code{:latex-compiler} +@tab @code{org-latex-compiler} +@item @code{:latex-default-figure-position} +@tab @code{org-latex-default-figure-position} +@item @code{:latex-default-table-environment} +@tab @code{org-latex-default-table-environment} +@item @code{:latex-default-table-mode} +@tab @code{org-latex-default-table-mode} +@item @code{:latex-diary-timestamp-format} +@tab @code{org-latex-diary-timestamp-format} +@item @code{:latex-footnote-defined-format} +@tab @code{org-latex-footnote-defined-format} +@item @code{:latex-footnote-separator} +@tab @code{org-latex-footnote-separator} +@item @code{:latex-format-drawer-function} +@tab @code{org-latex-format-drawer-function} +@item @code{:latex-format-headline-function} +@tab @code{org-latex-format-headline-function} +@item @code{:latex-format-inlinetask-function} +@tab @code{org-latex-format-inlinetask-function} +@item @code{:latex-hyperref-template} +@tab @code{org-latex-hyperref-template} +@item @code{:latex-image-default-height} +@tab @code{org-latex-image-default-height} +@item @code{:latex-image-default-option} +@tab @code{org-latex-image-default-option} +@item @code{:latex-image-default-width} +@tab @code{org-latex-image-default-width} +@item @code{:latex-images-centered} +@tab @code{org-latex-images-centered} +@item @code{:latex-inactive-timestamp-format} +@tab @code{org-latex-inactive-timestamp-format} +@item @code{:latex-inline-image-rules} +@tab @code{org-latex-inline-image-rules} +@item @code{:latex-link-with-unknown-path-format} +@tab @code{org-latex-link-with-unknown-path-format} +@item @code{:latex-listings-langs} +@tab @code{org-latex-listings-langs} +@item @code{:latex-listings-options} +@tab @code{org-latex-listings-options} +@item @code{:latex-listings} +@tab @code{org-latex-listings} +@item @code{:latex-minted-langs} +@tab @code{org-latex-minted-langs} +@item @code{:latex-minted-options} +@tab @code{org-latex-minted-options} +@item @code{:latex-prefer-user-labels} +@tab @code{org-latex-prefer-user-labels} +@item @code{:latex-subtitle-format} +@tab @code{org-latex-subtitle-format} +@item @code{:latex-subtitle-separate} +@tab @code{org-latex-subtitle-separate} +@item @code{:latex-table-scientific-notation} +@tab @code{org-latex-table-scientific-notation} +@item @code{:latex-tables-booktabs} +@tab @code{org-latex-tables-booktabs} +@item @code{:latex-tables-centered} +@tab @code{org-latex-tables-centered} +@item @code{:latex-text-markup-alist} +@tab @code{org-latex-text-markup-alist} +@item @code{:latex-title-command} +@tab @code{org-latex-title-command} +@item @code{:latex-toc-command} +@tab @code{org-latex-toc-command} +@end multitable + +@anchor{Markdown specific properties} +@subsubheading Markdown specific properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:md-footnote-format} +@tab @code{org-md-footnote-format} +@item @code{:md-footnotes-section} +@tab @code{org-md-footnotes-section} +@item @code{:md-headline-style} +@tab @code{org-md-headline-style} +@end multitable + +@anchor{ODT specific properties} +@subsubheading ODT specific properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:odt-content-template-file} +@tab @code{org-odt-content-template-file} +@item @code{:odt-display-outline-level} +@tab @code{org-odt-display-outline-level} +@item @code{:odt-fontify-srcblocks} +@tab @code{org-odt-fontify-srcblocks} +@item @code{:odt-format-drawer-function} +@tab @code{org-odt-format-drawer-function} +@item @code{:odt-format-headline-function} +@tab @code{org-odt-format-headline-function} +@item @code{:odt-format-inlinetask-function} +@tab @code{org-odt-format-inlinetask-function} +@item @code{:odt-inline-formula-rules} +@tab @code{org-odt-inline-formula-rules} +@item @code{:odt-inline-image-rules} +@tab @code{org-odt-inline-image-rules} +@item @code{:odt-pixels-per-inch} +@tab @code{org-odt-pixels-per-inch} +@item @code{:odt-styles-file} +@tab @code{org-odt-styles-file} +@item @code{:odt-table-styles} +@tab @code{org-odt-table-styles} +@item @code{:odt-use-date-fields} +@tab @code{org-odt-use-date-fields} +@end multitable + +@anchor{Texinfo specific properties} +@subsubheading Texinfo specific properties + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{:texinfo-active-timestamp-format} +@tab @code{org-texinfo-active-timestamp-format} +@item @code{:texinfo-classes} +@tab @code{org-texinfo-classes} +@item @code{:texinfo-class} +@tab @code{org-texinfo-default-class} +@item @code{:texinfo-table-default-markup} +@tab @code{org-texinfo-table-default-markup} +@item @code{:texinfo-diary-timestamp-format} +@tab @code{org-texinfo-diary-timestamp-format} +@item @code{:texinfo-filename} +@tab @code{org-texinfo-filename} +@item @code{:texinfo-format-drawer-function} +@tab @code{org-texinfo-format-drawer-function} +@item @code{:texinfo-format-headline-function} +@tab @code{org-texinfo-format-headline-function} +@item @code{:texinfo-format-inlinetask-function} +@tab @code{org-texinfo-format-inlinetask-function} +@item @code{:texinfo-inactive-timestamp-format} +@tab @code{org-texinfo-inactive-timestamp-format} +@item @code{:texinfo-link-with-unknown-path-format} +@tab @code{org-texinfo-link-with-unknown-path-format} +@item @code{:texinfo-node-description-column} +@tab @code{org-texinfo-node-description-column} +@item @code{:texinfo-table-scientific-notation} +@tab @code{org-texinfo-table-scientific-notation} +@item @code{:texinfo-tables-verbatim} +@tab @code{org-texinfo-tables-verbatim} +@item @code{:texinfo-text-markup-alist} +@tab @code{org-texinfo-text-markup-alist} +@end multitable + +@node Publishing links +@subsection Publishing links + +@cindex links, publishing + +To create a link from one Org file to another, you would use something +like @samp{[[file:foo.org][The foo]]} or simply @samp{[[file:foo.org]]} (see @ref{External Links}). When +published, this link becomes a link to @samp{foo.html}. You can thus +interlink the pages of your ``Org web'' project and the links will work +as expected when you publish them to HTML@. If you also publish the +Org source file and want to link to it, use an @samp{http} link instead of +a @samp{file:} link, because @samp{file} links are converted to link to the +corresponding @samp{.html} file. + +You may also link to related files, such as images. Provided you are +careful with relative file names, and provided you have also +configured Org to upload the related files, these links will work too. +See @ref{Complex example}, for an example of this +usage. + +Eventually, links between published documents can contain some search +options (see @ref{Search Options}), which will be resolved to +the appropriate location in the linked file. For example, once +published to HTML, the following links all point to a dedicated anchor +in @samp{foo.html}. + +@example +[[file:foo.org::*heading]] +[[file:foo.org::#custom-id]] +[[file:foo.org::target]] +@end example + +@node Site map +@subsection Generating a sitemap + +@cindex sitemap, of published pages + +The following properties may be used to control publishing of +a map of files for a given project. + +@table @asis +@item @code{:auto-sitemap} +When non-@code{nil}, publish a sitemap during +@code{org-publish-current-project} or @code{org-publish-all}. + +@item @code{:sitemap-filename} +Filename for output of sitemap. Defaults to @samp{sitemap.org}, which +becomes @samp{sitemap.html}. + +@item @code{:sitemap-title} +Title of sitemap page. Defaults to name of file. + +@item @code{:sitemap-format-entry} +@findex org-publish-find-date +@findex org-publish-find-property +@findex org-publish-find-title +With this option one can tell how a site-map entry is formatted in +the site-map. It is a function called with three arguments: the +file or directory name relative to base directory of the project, +the site-map style and the current project. It is expected to +return a string. Default value turns file names into links and use +document titles as descriptions. For specific formatting needs, one +can use @code{org-publish-find-date}, @code{org-publish-find-title} and +@code{org-publish-find-property}, to retrieve additional information +about published documents. + +@item @code{:sitemap-function} +Plug-in function to use for generation of the sitemap. It is called +with two arguments: the title of the site-map and a representation +of the files and directories involved in the project as a nested +list, which can further be transformed using @code{org-list-to-generic}, +@code{org-list-to-subtree} and alike. Default value generates a plain +list of links to all files in the project. + +@item @code{:sitemap-sort-folders} +Where folders should appear in the sitemap. Set this to @code{first} +(default) or @code{last} to display folders first or last, respectively. +When set to @code{ignore}, folders are ignored altogether. Any other +value mixes files and folders. This variable has no effect when +site-map style is @code{tree}. + +@item @code{:sitemap-sort-files} +How the files are sorted in the site map. Set this to +@code{alphabetically} (default), @code{chronologically} or +@code{anti-chronologically}. @code{chronologically} sorts the files with +older date first while @code{anti-chronologically} sorts the files with +newer date first. @code{alphabetically} sorts the files alphabetically. +The date of a file is retrieved with @code{org-publish-find-date}. + +@item @code{:sitemap-ignore-case} +Should sorting be case-sensitive? Default @code{nil}. + +@item @code{:sitemap-file-entry-format} +With this option one can tell how a sitemap's entry is formatted in +the sitemap. This is a format string with some escape sequences: +@code{%t} stands for the title of the file, @code{%a} stands for the author of +the file and @code{%d} stands for the date of the file. The date is +retrieved with the @code{org-publish-find-date} function and formatted +with @code{org-publish-sitemap-date-format}. Default @code{%t}. + +@item @code{:sitemap-date-format} +Format string for the @code{format-time-string} function that tells how +a sitemap entry's date is to be formatted. This property bypasses +@code{org-publish-sitemap-date-format} which defaults to @code{%Y-%m-%d}. +@end table + +@node Generating an index +@subsection Generating an index + +@cindex index, in a publishing project + +Org mode can generate an index across the files of a publishing project. + +@table @asis +@item @code{:makeindex} +When non-@code{nil}, generate in index in the file @samp{theindex.org} and +publish it as @samp{theindex.html}. +@end table + +The file is created when first publishing a project with the +@code{:makeindex} set. The file only contains a statement @samp{#+INCLUDE: +"theindex.inc"}. You can then build around this include statement by +adding a title, style information, etc. + +@cindex @samp{INDEX}, keyword +Index entries are specified with @samp{INDEX} keyword. An entry that +contains an exclamation mark creates a sub item. + +@example +*** Curriculum Vitae +#+INDEX: CV +#+INDEX: Application!CV +@end example + +@node Uploading Files +@section Uploading Files + +@cindex rsync +@cindex unison + +For those people already utilizing third party sync tools such as +Rsync or Unison, it might be preferable not to use the built-in remote +publishing facilities of Org mode which rely heavily on Tramp. Tramp, +while very useful and powerful, tends not to be so efficient for +multiple file transfer and has been known to cause problems under +heavy usage. + +Specialized synchronization utilities offer several advantages. In +addition to timestamp comparison, they also do content and +permissions/attribute checks. For this reason you might prefer to +publish your web to a local directory---possibly even @emph{in place} with +your Org files---and then use Unison or Rsync to do the +synchronization with the remote host. + +Since Unison, for example, can be configured as to which files to +transfer to a certain remote destination, it can greatly simplify the +project publishing definition. Simply keep all files in the correct +location, process your Org files with @code{org-publish} and let the +synchronization tool do the rest. You do not need, in this scenario, +to include attachments such as JPG, CSS or PNG files in the project +definition since the third-party tool syncs them. + +Publishing to a local directory is also much faster than to a remote +one, so that you can afford more easily to republish entire projects. +If you set @code{org-publish-use-timestamps-flag} to @code{nil}, you gain the +main benefit of re-including any changed external files such as source +example files you might include with @samp{INCLUDE} keyword. The timestamp +mechanism in Org is not smart enough to detect if included files have +been modified. + +@node Sample Configuration +@section Sample Configuration + +Below we provide two example configurations. The first one is +a simple project publishing only a set of Org files. The second +example is more complex, with a multi-component project. + +@menu +* Simple example:: One-component publishing. +* Complex example:: A multi-component publishing example. +@end menu + +@node Simple example +@subsection Example: simple publishing configuration + +This example publishes a set of Org files to the @samp{public_html} +directory on the local machine. + +@lisp +(setq org-publish-project-alist + '(("org" + :base-directory "~/org/" + :publishing-function org-html-publish-to-html + :publishing-directory "~/public_html" + :section-numbers nil + :with-toc nil + :html-head ""))) +@end lisp + +@node Complex example +@subsection Example: complex publishing configuration + +This more complicated example publishes an entire website, including +Org files converted to HTML, image files, Emacs Lisp source code, and +style sheets. The publishing directory is remote and private files +are excluded. + +To ensure that links are preserved, care should be taken to replicate +your directory structure on the web server, and to use relative file +paths. For example, if your Org files are kept in @samp{~/org/} and your +publishable images in @samp{~/images/}, you would link to an image with + +@example +file:../images/myimage.png +@end example + + +On the web server, the relative path to the image should be the same. +You can accomplish this by setting up an @samp{images/} folder in the right +place on the web server, and publishing images to it. + +@lisp +(setq org-publish-project-alist + '(("orgfiles" + :base-directory "~/org/" + :base-extension "org" + :publishing-directory "/ssh:user@@host:~/html/notebook/" + :publishing-function org-html-publish-to-html + :exclude "PrivatePage.org" ;; regexp + :headline-levels 3 + :section-numbers nil + :with-toc nil + :html-head "" + :html-preamble t) + + ("images" + :base-directory "~/images/" + :base-extension "jpg\\|gif\\|png" + :publishing-directory "/ssh:user@@host:~/html/images/" + :publishing-function org-publish-attachment) + + ("other" + :base-directory "~/other/" + :base-extension "css\\|el" + :publishing-directory "/ssh:user@@host:~/html/other/" + :publishing-function org-publish-attachment) + ("website" :components ("orgfiles" "images" "other")))) +@end lisp + +@node Triggering Publication +@section Triggering Publication + +Once properly configured, Org can publish with the following commands: + +@table @asis +@item @kbd{C-c C-e P x} (@code{org-publish}) +@kindex C-c C-e P x +@findex org-publish +Prompt for a specific project and publish all files that belong to +it. + +@item @kbd{C-c C-e P p} (@code{org-publish-current-project}) +@kindex C-c C-e P p +@findex org-publish-current-project +Publish the project containing the current file. + +@item @kbd{C-c C-e P f} (@code{org-publish-current-file}) +@kindex C-c C-e P f +@findex org-publish-current-file +Publish only the current file. + +@item @kbd{C-c C-e P a} (@code{org-publish-all}) +@kindex C-c C-e P a +@findex org-publish-all +Publish every project. +@end table + +@vindex org-publish-use-timestamps-flag +Org uses timestamps to track when a file has changed. The above +functions normally only publish changed files. You can override this +and force publishing of all files by giving a prefix argument to any +of the commands above, or by customizing the variable +@code{org-publish-use-timestamps-flag}. This may be necessary in +particular if files include other files via @samp{SETUPFILE} or @samp{INCLUDE} +keywords. + +@node Citation handling +@chapter Citation handling + +@cindex citation + +The @samp{oc.el} library provides tooling to handle citations in Org via +``citation processors'' that offer some or all of the following +capabilities: + +@table @asis +@item activate +Fontification, tooltip preview, etc. +@item follow +At-point actions on citations via @code{org-open-at-point}. +@item insert +Add and edit citations via @code{org-cite-insert}. +@item export +Via different libraries for different target formats. +@end table + +The user can configure these with @code{org-cite-activate-processor}, +@code{org-cite-follow-processor}, @code{org-cite-insert-processor}, and +@code{org-cite-export-processors} respectively. + +The included ``basic'' processor provides all four capabilities. + +@menu +* Citations:: +* Citation export processors:: +@end menu + +@node Citations +@section Citations + +Before adding citations, first set one-or-more bibliographies, either +globally with @code{org-cite-global-bibliography}, or locally using one or +more ``bibliography'' keywords. + +@example +#+bibliography: SomeFile.bib +#+bibliography: /some/other/file.json +#+bibliography: "/some/file/with spaces/in its name.bib" +@end example + +@kindex C-c C-x @@ +@findex org-cite-insert +One can then insert and edit citations using @code{org-cite-insert}, called +with @kbd{C-c C-x @@}. + +A @emph{citation} requires one or more citation @emph{key(s)}, elements +identifying a reference in the bibliography. + +@itemize +@item +Each citation is surrounded by brackets and uses the @samp{cite} type. + +@item +Each key starts with the character @samp{@@}. + +@item +Each key can be qualified by a @emph{prefix} (e.g.@tie{}``see '') and/or +a @emph{suffix} (e.g.@tie{}``p.@tie{}123''), giving information useful or necessary +fo the comprehension of the citation but not included in the +reference. + +@item +A single citation can cite more than one reference ; the keys are +separated by semicolons ; the formatting of such citation groups is +specified by the style. + +@item +One can also specify a stylistic variation for the citations by +inserting a @samp{/} and a style name between the @samp{cite} keyword and the +colon; this usually makes sense only for the author-year styles. +@end itemize + +@example +[cite/style:common prefix ;prefix @@key suffix; ... ; common suffix] +@end example + + +The only mandatory elements are: + +@itemize +@item +The @samp{cite} keyword and the colon. +@item +The @samp{@@} character immediately preceding each key. +@item +The brackets surrounding the citation(s) (group). +@end itemize + +@node Citation export processors +@section Citation export processors + +Org currently includes the following export processors: + +@itemize +@item +Two processors can export to a variety of formats, including @samp{latex} +(and therefore @samp{pdf}), @samp{html}, @samp{odt} and plain (UTF8) text: + +@table @asis +@item basic +a basic export processor, well adapted to situations +where backward compatibility is not a requirement and formatting +needs are minimal; + +@item csl +this export processor uses format files written in @uref{https://en.wikipedia.org/wiki/Citation_Style_Language, Citation +Style Language} via @uref{https://github.com/andras-simonyi/citeproc-el, citeproc-el}; +@end table + +@item +In contrast, two other processors target @LaTeX{} and @LaTeX{}-derived +formats exclusively: + +@table @asis +@item natbib +this export processor uses Bib@TeX{}, the historical +bibliographic processor used with @LaTeX{}, thus allowing the use of +data and style files compatible with this processor (including +a large number of publishers' styles). It uses citation commands +implemented in the @LaTeX{} package @samp{natbib}, allowing more stylistic +variants that @LaTeX{}'s @samp{\cite} command. + +@item biblatex +this backend allows the use of data and formats +prepared for Bib@LaTeX{}, an alternate bibliographic processor used +with @LaTeX{}, which overcomes some serious Bib@TeX{} limitations, but +has not (yet?)@tie{}been widely adopted by publishers. +@end table +@end itemize + +The @samp{CITE_EXPORT} keyword specifies the export processor and the +citation (and possibly reference) style(s); for example (all arguments +are optional) + +@example +#+cite_export: basic author author-year +@end example + + +@noindent +specifies the ``basic'' export processor with citations inserted as +author's name and references indexed by author's names and year; + +@example +#+cite_export: csl /some/path/to/vancouver-brackets.csl +@end example + + +@noindent +specifies the ``csl'' processor and CSL style, which in this case +defines numeric citations and numeric references according to the +@samp{Vancouver} specification (as style used in many medical journals), +following a typesetting variation putting citations between brackets; + +@example +#+cite_export: natbib kluwer +@end example + + +@noindent +specifies the @samp{natbib} export processor with a label citation style +conformant to the Harvard style and the specification of the +Wolkers-Kluwer publisher; since it relies on the @code{bibtex} processor of +your @LaTeX{} installation, it won't export to anything but PDF@. + +@node Working with Source Code +@chapter Working with Source Code + +@cindex source code, working with + +Source code here refers to any plain text collection of computer +instructions, possibly with comments, written using a human-readable +programming language. Org can manage source code in an Org document +when the source code is identified with begin and end markers. +Working with source code begins with identifying source code blocks. +A source code block can be placed almost anywhere in an Org document; +it is not restricted to the preamble or the end of the document. +However, Org cannot manage a source code block if it is placed inside +an Org comment or within a fixed width section. + +Here is an example source code block in the Emacs Lisp language: + +@example +#+BEGIN_SRC emacs-lisp + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) +#+END_SRC +@end example + +Source code blocks are one of many Org block types, which also include +``center'', ``comment'', ``dynamic'', ``example'', ``export'', ``quote'', +``special'', and ``verse''. This section pertains to blocks between +@samp{#+BEGIN_SRC} and @samp{#+END_SRC}. + +Details of Org's facilities for working with source code are described +in the following sections. + +@menu +* Features Overview:: Enjoy the versatility of source blocks. +* Structure of Code Blocks:: Code block syntax described. +* Using Header Arguments:: Different ways to set header arguments. +* Environment of a Code Block:: Arguments, sessions, working directory... +* Evaluating Code Blocks:: Place results of evaluation in the Org buffer. +* Results of Evaluation:: Choosing a results type, post-processing... +* Exporting Code Blocks:: Export contents and/or results. +* Extracting Source Code:: Create pure source code files. +* Languages:: List of supported code block languages. +* Editing Source Code:: Language major-mode editing. +* Noweb Reference Syntax:: Literate programming in Org mode. +* Library of Babel:: Use and contribute to a library of useful code blocks. +* Key bindings and Useful Functions:: Work quickly with code blocks. +* Batch Execution:: Call functions from the command line. +@end menu + +@node Features Overview +@section Features Overview + +Org can manage the source code in the block delimited by @samp{#+BEGIN_SRC} +@dots{} @samp{#+END_SRC} in several ways that can simplify housekeeping tasks +essential to modern source code maintenance. Org can edit, format, +extract, export, and publish source code blocks. Org can also compile +and execute a source code block, then capture the results. The Org +mode literature sometimes refers to source code blocks as @emph{live code} +blocks because they can alter the content of the Org document or the +material that it exports. Users can control the ``liveliness'' of each +source code block by tweaking the header arguments (see @ref{Using Header Arguments}) for compiling, execution, extraction, and exporting. + +For editing and formatting a source code block, Org uses an +appropriate Emacs major mode that includes features specifically +designed for source code in that language. + +Org can extract one or more source code blocks and write them to one +or more source files---a process known as @emph{tangling} in literate +programming terminology. + +For exporting and publishing, Org's back-ends can format a source code +block appropriately, often with native syntax highlighting. + +For executing and compiling a source code block, the user can +configure Org to select the appropriate compiler. Org provides +facilities to collect the result of the execution or compiler output, +insert it into the Org document, and/or export it. In addition to +text results, Org can insert links to other data types, including +audio, video, and graphics. Org can also link a compiler error +message to the appropriate line in the source code block. + +An important feature of Org's management of source code blocks is the +ability to pass variables, functions, and results to one another using +a common syntax for source code blocks in any language. Although most +literate programming facilities are restricted to one language or +another, Org's language-agnostic approach lets the literate programmer +match each programming task with the appropriate computer language and +to mix them all together in a single Org document. This +interoperability among languages explains why Org's source code +management facility was named @emph{Org Babel} by its originators, Eric +Schulte and Dan Davison. + +Org mode fulfills the promise of easy verification and maintenance of +publishing reproducible research by keeping text, data, code, +configuration settings of the execution environment, the results of +the execution, and associated narratives, claims, references, and +internal and external links in a single Org document. + +@node Structure of Code Blocks +@section Structure of Code Blocks + +@cindex code block, structure +@cindex source code, block structure +@cindex @samp{NAME} keyword, in source blocks +@cindex @samp{BEGIN_SRC} + +Org offers two ways to structure source code in Org documents: in +a source code block, and directly inline. Both specifications are +shown below. + +A source code block conforms to this structure: + +@example +#+NAME: +#+BEGIN_SRC
+ +#+END_SRC +@end example + +Do not be put-off by having to remember the source block syntax. Org +mode offers a command for wrapping existing text in a block (see +@ref{Structure Templates}). Org also works with other completion systems +in Emacs, some of which predate Org and have custom domain-specific +languages for defining templates. Regular use of templates reduces +errors, increases accuracy, and maintains consistency. + +@cindex source code, inline +An inline code block conforms to this structure: + +@example +src_@{@} +@end example + + +@noindent +or + +@example +src_[
]@{@} +@end example + + +@table @asis +@item @samp{#+NAME: } +Optional. Names the source block so it can be called, like +a function, from other source blocks or inline code to evaluate or +to capture the results. Code from other blocks, other files, and +from table formulas (see @ref{The Spreadsheet}) can use the name to +reference a source block. This naming serves the same purpose as +naming Org tables. Org mode requires unique names. For duplicate +names, Org mode's behavior is undefined. + +@item @samp{#+BEGIN_SRC} @dots{} @samp{#+END_SRC} +Mandatory. They mark the start and end of a block that Org +requires. The @samp{#+BEGIN_SRC} line takes additional arguments, as +described next. + +@item @samp{} +@cindex language, in code blocks +Mandatory. It is the identifier of the source code language in the +block. See @ref{Languages}, for identifiers of supported languages. + +@item @samp{} +@cindex switches, in code blocks +Optional. Switches provide finer control of the code execution, +export, and format (see the discussion of switches in @ref{Literal Examples}). + +@item @samp{
} +@cindex header arguments, in code blocks +Optional. Heading arguments control many aspects of evaluation, +export and tangling of code blocks (see @ref{Using Header Arguments}). +Using Org's properties feature, header arguments can be selectively +applied to the entire buffer or specific sub-trees of the Org +document. + +@item @samp{} +Source code in the dialect of the specified language identifier. +@end table + +@node Using Header Arguments +@section Using Header Arguments + +Org comes with many header arguments common to all languages. New +header arguments are added for specific languages as they become +available for use in source code blocks. A header argument is +specified with an initial colon followed by the argument's name in +lowercase. + +Since header arguments can be set in several ways, Org prioritizes +them in case of overlaps or conflicts by giving local settings +a higher priority. Header values in function calls, for example, +override header values from global defaults. + +@anchor{System-wide header arguments} +@subheading System-wide header arguments + +@vindex org-babel-default-header-args + +@vindex org-babel-default-header-args +System-wide values of header arguments can be specified by customizing +the @code{org-babel-default-header-args} variable, which defaults to the +following values: + +@example +:session => "none" +:results => "replace" +:exports => "code" +:cache => "no" +:noweb => "no" +@end example + +The example below sets @samp{:noweb} header arguments to @samp{yes}, which makes +Org expand @samp{:noweb} references by default. + +@lisp +(setq org-babel-default-header-args + (cons '(:noweb . "yes") + (assq-delete-all :noweb org-babel-default-header-args))) +@end lisp + +@cindex language specific default header arguments +@cindex default header arguments per language +Each language can have separate default header arguments by +customizing the variable @code{org-babel-default-header-args:}, where +@var{} is the name of the language. For details, see the +language-specific online documentation at +@uref{https://orgmode.org/worg/org-contrib/babel/}. + +@anchor{Header arguments in Org mode properties} +@subheading Header arguments in Org mode properties + +For header arguments applicable to the buffer, use @samp{PROPERTY} keyword +anywhere in the Org file (see @ref{Property Syntax}). + +The following example makes all the R code blocks execute in the same +session. Setting @samp{:results} to @samp{silent} ignores the results of +executions for all blocks, not just R code blocks; no results inserted +for any block. + +@example +#+PROPERTY: header-args:R :session *R* +#+PROPERTY: header-args :results silent +@end example + +@vindex org-use-property-inheritance +Header arguments set through Org's property drawers (see @ref{Property Syntax}) apply at the sub-tree level on down. Since these property +drawers can appear anywhere in the file hierarchy, Org uses outermost +call or source block to resolve the values. Org ignores +@code{org-use-property-inheritance} setting. + +In this example, @samp{:cache} defaults to @samp{yes} for all code blocks in the +sub-tree. + +@example +* sample header + :PROPERTIES: + :header-args: :cache yes + :END: +@end example + +@kindex C-c C-x p +@findex org-set-property +Properties defined through @code{org-set-property} function, bound to +@kbd{C-c C-x p}, apply to all active languages. They override +properties set in @code{org-babel-default-header-args}. + +@cindex language specific header arguments properties +@cindex header arguments per language +Language-specific header arguments are also read from properties +@samp{header-args:} where @var{} is the language +identifier. For example, + +@example +* Heading + :PROPERTIES: + :header-args:clojure: :session *clojure-1* + :header-args:R: :session *R* + :END: +** Subheading + :PROPERTIES: + :header-args:clojure: :session *clojure-2* + :END: +@end example + +@noindent +would force separate sessions for Clojure blocks in @samp{Heading} and +@samp{Subheading}, but use the same session for all R blocks. Blocks in +@samp{Subheading} inherit settings from @samp{Heading}. + +@anchor{Code block specific header arguments} +@subheading Code block specific header arguments + +Header arguments are most commonly set at the source code block level, +on the @samp{#+BEGIN_SRC} line. Arguments set at this level take +precedence over those set in the @code{org-babel-default-header-args} +variable, and also those set as header properties. + +In the following example, setting @samp{:results} to @samp{silent} makes it +ignore results of the code execution. Setting @samp{:exports} to @samp{code} +exports only the body of the code block to HTML or @LaTeX{}. + +@example +#+NAME: factorial +#+BEGIN_SRC haskell :results silent :exports code :var n=0 + fac 0 = 1 + fac n = n * fac (n-1) +#+END_SRC +@end example + +The same header arguments in an inline code block: + +@example +src_haskell[:exports both]@{fac 5@} +@end example + + +@cindex @samp{HEADER}, keyword +Code block header arguments can span multiple lines using @samp{#+HEADER:} +on each line. Note that Org currently accepts the plural spelling of +@samp{#+HEADER:} only as a convenience for backward-compatibility. It may +be removed at some point. + +Multi-line header arguments on an unnamed code block: + +@example +#+HEADER: :var data1=1 +#+BEGIN_SRC emacs-lisp :var data2=2 + (message "data1:%S, data2:%S" data1 data2) +#+END_SRC + +#+RESULTS: +: data1:1, data2:2 +@end example + +Multi-line header arguments on a named code block: + +@example +#+NAME: named-block +#+HEADER: :var data=2 +#+BEGIN_SRC emacs-lisp + (message "data:%S" data) +#+END_SRC + +#+RESULTS: named-block + : data:2 +@end example + +@anchor{Header arguments in function calls} +@subheading Header arguments in function calls + +Header arguments in function calls are the most specific and override +all other settings in case of an overlap. They get the highest +priority. Two @samp{#+CALL:} examples are shown below. For the complete +syntax of @samp{CALL} keyword, see @ref{Evaluating Code Blocks}. + +In this example, @samp{:exports results} header argument is applied to the +evaluation of the @samp{#+CALL:} line. + +@example +#+CALL: factorial(n=5) :exports results +@end example + + +In this example, @samp{:session special} header argument is applied to the +evaluation of @samp{factorial} code block. + +@example +#+CALL: factorial[:session special](n=5) +@end example + +@node Environment of a Code Block +@section Environment of a Code Block + + + +@anchor{Passing arguments} +@subheading Passing arguments + +@cindex passing arguments to code blocks +@cindex arguments, in code blocks +@cindex @samp{var}, header argument +Use @samp{var} for passing arguments to source code blocks. The specifics +of variables in code blocks vary by the source language and are +covered in the language-specific documentation. The syntax for @samp{var}, +however, is the same for all languages. This includes declaring +a variable, and assigning a default value. + +The following syntax is used to pass arguments to code blocks using +the @samp{var} header argument. + +@example +:var NAME=ASSIGN +@end example + + +@noindent +@var{NAME} is the name of the variable bound in the code block +body. @var{ASSIGN} is a literal value, such as a string, +a number, a reference to a table, a list, a literal example, another +code block---with or without arguments---or the results of evaluating +a code block. @var{ASSIGN} may specify a filename for references +to elements in a different file, using a @samp{:} to separate the filename +from the reference. + +@example +:var NAME=FILE:REFERENCE +@end example + + +Here are examples of passing values by reference: + +@table @asis +@item table +A table named with a @samp{NAME} keyword. + +@example +#+NAME: example-table +| 1 | +| 2 | +| 3 | +| 4 | + +#+NAME: table-length +#+BEGIN_SRC emacs-lisp :var table=example-table + (length table) +#+END_SRC + +#+RESULTS: table-length +: 4 +@end example + +When passing a table, you can treat specially the row, or the +column, containing labels for the columns, or the rows, in the +table. + +@cindex @samp{colnames}, header argument +The @samp{colnames} header argument accepts @samp{yes}, @samp{no}, or @samp{nil} values. +The default value is @samp{nil}: if an input table has column +names---because the second row is a horizontal rule---then Org +removes the column names, processes the table, puts back the column +names, and then writes the table to the results block. Using @samp{yes}, +Org does the same to the first row, even if the initial table does +not contain any horizontal rule. When set to @samp{no}, Org does not +pre-process column names at all. + +@example +#+NAME: less-cols +| a | +|---| +| b | +| c | + +#+BEGIN_SRC python :var tab=less-cols :colnames nil + return [[val + '*' for val in row] for row in tab] +#+END_SRC + +#+RESULTS: +| a | +|----| +| b* | +| c* | +@end example + +@cindex @samp{rownames}, header argument +Similarly, the @samp{rownames} header argument can take two values: @samp{yes} +or @samp{no}. When set to @samp{yes}, Org removes the first column, processes +the table, puts back the first column, and then writes the table to +the results block. The default is @samp{no}, which means Org does not +pre-process the first column. Note that Emacs Lisp code blocks +ignore @samp{rownames} header argument because of the ease of +table-handling in Emacs. + +@example +#+NAME: with-rownames +| one | 1 | 2 | 3 | 4 | 5 | +| two | 6 | 7 | 8 | 9 | 10 | + +#+BEGIN_SRC python :var tab=with-rownames :rownames yes + return [[val + 10 for val in row] for row in tab] +#+END_SRC + +#+RESULTS: +| one | 11 | 12 | 13 | 14 | 15 | +| two | 16 | 17 | 18 | 19 | 20 | +@end example +@end table + +To refer to a table in another file, join the filename and table name with +a colon, for example: @samp{:var table=other-file.org:example-table}. + +@table @asis +@item list +A simple named list. + +@example +#+NAME: example-list +- simple + - not + - nested +- list + +#+BEGIN_SRC emacs-lisp :var x=example-list + (print x) +#+END_SRC + +#+RESULTS: +| simple | list | +@end example + +Note that only the top level list items are passed along. Nested +list items are ignored. + +@item code block without arguments +A code block name, as assigned by @samp{NAME} keyword from the example +above, optionally followed by parentheses. + +@example +#+BEGIN_SRC emacs-lisp :var length=table-length() + (* 2 length) +#+END_SRC + +#+RESULTS: +: 8 +@end example + +@item code block with arguments +A code block name, as assigned by @samp{NAME} keyword, followed by +parentheses and optional arguments passed within the parentheses. + +@example +#+NAME: double +#+BEGIN_SRC emacs-lisp :var input=8 + (* 2 input) +#+END_SRC + +#+RESULTS: double +: 16 + +#+NAME: squared +#+BEGIN_SRC emacs-lisp :var input=double(input=1) + (* input input) +#+END_SRC + +#+RESULTS: squared +: 4 +@end example + +@item literal example +A literal example block named with a @samp{NAME} keyword. + +@example +#+NAME: literal-example +#+BEGIN_EXAMPLE + A literal example + on two lines +#+END_EXAMPLE + +#+NAME: read-literal-example +#+BEGIN_SRC emacs-lisp :var x=literal-example + (concatenate #'string x " for you.") +#+END_SRC + +#+RESULTS: read-literal-example +: A literal example +: on two lines for you. +@end example +@end table + +Indexing variable values enables referencing portions of a variable. +Indexes are 0 based with negative values counting backwards from the +end. If an index is separated by commas then each subsequent section +indexes as the next dimension. Note that this indexing occurs +@emph{before} other table-related header arguments are applied, such as +@samp{hlines}, @samp{colnames} and @samp{rownames}. The following example assigns +the last cell of the first row the table @samp{example-table} to the +variable @samp{data}: + +@example +#+NAME: example-table +| 1 | a | +| 2 | b | +| 3 | c | +| 4 | d | + +#+BEGIN_SRC emacs-lisp :var data=example-table[0,-1] + data +#+END_SRC + +#+RESULTS: +: a +@end example + +Two integers separated by a colon reference a range of variable +values. In that case the entire inclusive range is referenced. For +example the following assigns the middle three rows of @samp{example-table} +to @samp{data}. + +@example +#+NAME: example-table +| 1 | a | +| 2 | b | +| 3 | c | +| 4 | d | +| 5 | 3 | + +#+BEGIN_SRC emacs-lisp :var data=example-table[1:3] + data +#+END_SRC + +#+RESULTS: +| 2 | b | +| 3 | c | +| 4 | d | +@end example + +To pick the entire range, use an empty index, or the single character +@samp{*}. @samp{0:-1} does the same thing. Example below shows how to +reference the first column only. + +@example +#+NAME: example-table +| 1 | a | +| 2 | b | +| 3 | c | +| 4 | d | + +#+BEGIN_SRC emacs-lisp :var data=example-table[,0] + data +#+END_SRC + +#+RESULTS: +| 1 | 2 | 3 | 4 | +@end example + +Index referencing can be used for tables and code blocks. Index +referencing can handle any number of dimensions. Commas delimit +multiple dimensions, as shown below. + +@example +#+NAME: 3D +#+BEGIN_SRC emacs-lisp + '(((1 2 3) (4 5 6) (7 8 9)) + ((10 11 12) (13 14 15) (16 17 18)) + ((19 20 21) (22 23 24) (25 26 27))) +#+END_SRC + +#+BEGIN_SRC emacs-lisp :var data=3D[1,,1] + data +#+END_SRC + +#+RESULTS: +| 11 | 14 | 17 | +@end example + +Note that row names and column names are not removed prior to variable +indexing. You need to take them into account, even when @samp{colnames} or +@samp{rownames} header arguments remove them. + +Emacs lisp code can also set the values for variables. To +differentiate a value from Lisp code, Org interprets any value +starting with @samp{(}, @samp{[}, @samp{'} or @samp{`} as Emacs Lisp code. The result of +evaluating that code is then assigned to the value of that variable. +The following example shows how to reliably query and pass the file +name of the Org mode buffer to a code block using headers. We need +reliability here because the file's name could change once the code in +the block starts executing. + +@example +#+BEGIN_SRC sh :var filename=(buffer-file-name) :exports both + wc -w $filename +#+END_SRC +@end example + +Note that values read from tables and lists are not mistakenly +evaluated as Emacs Lisp code, as illustrated in the following example. + +@example +#+NAME: table +| (a b c) | + +#+HEADER: :var data=table[0,0] +#+BEGIN_SRC perl + $data +#+END_SRC + +#+RESULTS: +: (a b c) +@end example + +@anchor{Using sessions} +@subheading Using sessions + +@cindex using sessions in code blocks +@cindex @samp{session}, header argument +Two code blocks can share the same environment. The @samp{session} header +argument is for running multiple source code blocks under one session. +Org runs code blocks with the same session name in the same +interpreter process. + +@table @asis +@item @samp{none} +Default. Each code block gets a new interpreter process to execute. +The process terminates once the block is evaluated. + +@item @var{STRING} +Any string besides @samp{none} turns that string into the name of that +session. For example, @samp{:session STRING} names it @samp{STRING}. If +@samp{session} has no value, then the session name is derived from the +source language identifier. Subsequent blocks with the same source +code language use the same session. Depending on the language, +state variables, code from other blocks, and the overall interpreted +environment may be shared. Some interpreted languages support +concurrent sessions when subsequent source code language blocks +change session names. +@end table + +Only languages that provide interactive evaluation can have session +support. Not all languages provide this support, such as C and ditaa. +Even languages, such as Python and Haskell, that do support +interactive evaluation impose limitations on allowable language +constructs that can run interactively. Org inherits those limitations +for those code blocks running in a session. + +@anchor{Choosing a working directory} +@subheading Choosing a working directory + +@cindex working directory, in a code block +@cindex @samp{dir}, header argument +@cindex @samp{mkdirp}, header argument +The @samp{dir} header argument specifies the default directory during code +block execution. If it is absent, then the directory associated with +the current buffer is used. In other words, supplying @samp{:dir +DIRECTORY} temporarily has the same effect as changing the current +directory with @kbd{M-x cd @key{RET} DIRECTORY}, and then not setting +@samp{dir}. Under the surface, @samp{dir} simply sets the value of the Emacs +variable @code{default-directory}. Setting @samp{mkdirp} header argument to +a non-@code{nil} value creates the directory, if necessary. + +For example, to save the plot file in the @samp{Work/} folder of the home +directory---notice tilde is expanded: + +@example +#+BEGIN_SRC R :file myplot.png :dir ~/Work + matplot(matrix(rnorm(100), 10), type="l") +#+END_SRC +@end example + +To evaluate the code block on a remote machine, supply a remote +directory name using Tramp syntax. For example: + +@example +#+BEGIN_SRC R :file plot.png :dir /scp:dand@@yakuba.princeton.edu: + plot(1:10, main=system("hostname", intern=TRUE)) +#+END_SRC +@end example + +Org first captures the text results as usual for insertion in the Org +file. Then Org also inserts a link to the remote file, thanks to +Emacs Tramp. Org constructs the remote path to the file name from +@samp{dir} and @code{default-directory}, as illustrated here: + +@example +[[file:/scp:dand@@yakuba.princeton.edu:/home/dand/plot.png][plot.png]] +@end example + + +When @samp{dir} is used with @samp{session}, Org sets the starting directory for +a new session. But Org does not alter the directory of an already +existing session. + +Do not use @samp{dir} with @samp{:exports results} or with @samp{:exports both} to +avoid Org inserting incorrect links to remote files. That is because +Org does not expand @code{default directory} to avoid some underlying +portability issues. + +@anchor{Inserting headers and footers} +@subheading Inserting headers and footers + +@cindex headers, in code blocks +@cindex footers, in code blocks +@cindex @samp{prologue}, header argument +The @samp{prologue} header argument is for appending to the top of the code +block for execution, like a reset instruction. For example, you may +use @samp{:prologue "reset"} in a Gnuplot code block or, for every such +block: + +@lisp +(add-to-list 'org-babel-default-header-args:gnuplot + '((:prologue . "reset"))) + +@end lisp + +@cindex @samp{epilogue}, header argument +Likewise, the value of the @samp{epilogue} header argument is for appending +to the end of the code block for execution. + +@node Evaluating Code Blocks +@section Evaluating Code Blocks + +@cindex code block, evaluating +@cindex source code, evaluating +@cindex @samp{RESULTS}, keyword + +A note about security: With code evaluation comes the risk of harm. +Org safeguards by prompting for user's permission before executing any +code in the source block. To customize this safeguard, or disable it, +see @ref{Code Evaluation Security}. + +@anchor{How to evaluate source code} +@subheading How to evaluate source code + +Org captures the results of the code block evaluation and inserts them +in the Org file, right after the code block. The insertion point is +after a newline and the @samp{RESULTS} keyword. Org creates the @samp{RESULTS} +keyword if one is not already there. + +By default, Org enables only Emacs Lisp code blocks for execution. +See @ref{Languages} to enable other languages. + +@kindex C-c C-c +@kindex C-c C-v e +@findex org-babel-execute-src-block +Org provides many ways to execute code blocks. @kbd{C-c C-c} or +@kbd{C-c C-v e} with the point on a code block@footnote{The option @code{org-babel-no-eval-on-ctrl-c-ctrl-c} can be used +to remove code evaluation from the @kbd{C-c C-c} key binding.} calls the +@code{org-babel-execute-src-block} function, which executes the code in the +block, collects the results, and inserts them in the buffer. + +@cindex @samp{CALL}, keyword +@vindex org-babel-inline-result-wrap +By calling a named code block@footnote{Actually, the constructs @samp{call_()} and @samp{src_@{@}} +are not evaluated when they appear in a keyword (see @ref{In-buffer Settings}).} from an Org mode buffer or +a table. Org can call the named code blocks from the current Org mode +buffer or from the ``Library of Babel'' (see @ref{Library of Babel}). + +The syntax for @samp{CALL} keyword is: + +@example +#+CALL: () +#+CALL: []() +@end example + +The syntax for inline named code blocks is: + +@example +... call_() ... +... call_[]()[] ... +@end example + +When inline syntax is used, the result is wrapped based on the +variable @code{org-babel-inline-result-wrap}, which by default is set to +@code{"=%s="} to produce verbatim text suitable for markup. + +@table @asis +@item @samp{} +This is the name of the code block (see @ref{Structure of Code Blocks}) +to be evaluated in the current document. If the block is located in +another file, start @samp{} with the file name followed by +a colon. For example, in order to execute a block named @samp{clear-data} +in @samp{file.org}, you can write the following: + +@example +#+CALL: file.org:clear-data() +@end example + +@item @samp{} +Org passes arguments to the code block using standard function call +syntax. For example, a @samp{#+CALL:} line that passes @samp{4} to a code +block named @samp{double}, which declares the header argument @samp{:var n=2}, +would be written as: + +@example +#+CALL: double(n=4) +@end example + + +@noindent +Note how this function call syntax is different from the header +argument syntax. + +@item @samp{} +Org passes inside header arguments to the named code block using the +header argument syntax. Inside header arguments apply to code block +evaluation. For example, @samp{[:results output]} collects results +printed to stdout during code execution of that block. Note how +this header argument syntax is different from the function call +syntax. + +@item @samp{} +End header arguments affect the results returned by the code block. +For example, @samp{:results html} wraps the results in a @samp{#+BEGIN_EXPORT + html} block before inserting the results in the Org buffer. +@end table + +@anchor{Limit code block evaluation} +@subheading Limit code block evaluation + +@cindex @samp{eval}, header argument +@cindex control code block evaluation +The @samp{eval} header argument can limit evaluation of specific code +blocks and @samp{CALL} keyword. It is useful for protection against +evaluating untrusted code blocks by prompting for a confirmation. + +@table @asis +@item @samp{never} or @samp{no} +Org never evaluates the source code. + +@item @samp{query} +Org prompts the user for permission to evaluate the source code. + +@item @samp{never-export} or @samp{no-export} +Org does not evaluate the source code when exporting, yet the user +can evaluate it interactively. + +@item @samp{query-export} +Org prompts the user for permission to evaluate the source code +during export. +@end table + +If @samp{eval} header argument is not set, then Org determines whether to +evaluate the source code from the @code{org-confirm-babel-evaluate} +variable (see @ref{Code Evaluation Security}). + +@anchor{Cache results of evaluation} +@subheading Cache results of evaluation + +@cindex @samp{cache}, header argument +@cindex cache results of code evaluation +The @samp{cache} header argument is for caching results of evaluating code +blocks. Caching results can avoid re-evaluating a code block that +have not changed since the previous run. To benefit from the cache +and avoid redundant evaluations, the source block must have a result +already present in the buffer, and neither the header +arguments---including the value of @samp{var} references---nor the text of +the block itself has changed since the result was last computed. This +feature greatly helps avoid long-running calculations. For some edge +cases, however, the cached results may not be reliable. + +The caching feature is best for when code blocks are pure functions, +that is functions that return the same value for the same input +arguments (see @ref{Environment of a Code Block}), and that do not have +side effects, and do not rely on external variables other than the +input arguments. Functions that depend on a timer, file system +objects, and random number generators are clearly unsuitable for +caching. + +A note of warning: when @samp{cache} is used in a session, caching may +cause unexpected results. + +When the caching mechanism tests for any source code changes, it does +not expand noweb style references (see @ref{Noweb Reference Syntax}). + +The @samp{cache} header argument can have one of two values: @samp{yes} or @samp{no}. + +@table @asis +@item @samp{no} +Default. No caching of results; code block evaluated every time. + +@item @samp{yes} +Whether to run the code or return the cached results is determined +by comparing the SHA1 hash value of the combined code block and +arguments passed to it. This hash value is packed on the +@samp{#+RESULTS:} line from previous evaluation. When hash values match, +Org does not evaluate the code block. When hash values mismatch, +Org evaluates the code block, inserts the results, recalculates the +hash value, and updates @samp{#+RESULTS:} line. +@end table + +In this example, both functions are cached. But @samp{caller} runs only if +the result from @samp{random} has changed since the last run. + +@example +#+NAME: random +#+BEGIN_SRC R :cache yes + runif(1) +#+END_SRC + +#+RESULTS[a2a72cd647ad44515fab62e144796432793d68e1]: random +0.4659510825295 + +#+NAME: caller +#+BEGIN_SRC emacs-lisp :var x=random :cache yes + x +#+END_SRC + +#+RESULTS[bec9c8724e397d5df3b696502df3ed7892fc4f5f]: caller +0.254227238707244 +@end example + +@node Results of Evaluation +@section Results of Evaluation + +@cindex code block, results of evaluation +@cindex source code, results of evaluation + +@cindex @samp{results}, header argument +How Org handles results of a code block execution depends on many +header arguments working together. The primary determinant, however, +is the @samp{results} header argument. It accepts four classes of options. +Each code block can take only one option per class: + +@table @asis +@item Collection +For how the results should be collected from the code block; + +@item Type +For which type of result the code block will return; affects how Org +processes and inserts results in the Org buffer; + +@item Format +For the result; affects how Org processes results; + +@item Handling +For inserting results once they are properly formatted. +@end table + +@anchor{Collection} +@subheading Collection + +Collection options specify the results. Choose one of the options; +they are mutually exclusive. + +@table @asis +@item @samp{value} +Default for most Babel libraries@footnote{Actually, the constructs @samp{call_()} and @samp{src_@{@}} +are not evaluated when they appear in a keyword (see @ref{In-buffer Settings}).}. Functional mode. Org +gets the value by wrapping the code in a function definition in the +language of the source block. That is why when using @samp{:results + value}, code should execute like a function and return a value. For +languages like Python, an explicit @code{return} statement is mandatory +when using @samp{:results value}. Result is the value returned by the +last statement in the code block. + +When evaluating the code block in a session (see @ref{Environment of a Code Block}), Org passes the code to an interpreter running as an +interactive Emacs inferior process. Org gets the value from the +source code interpreter's last statement output. Org has to use +language-specific methods to obtain the value. For example, from +the variable @code{_} in Ruby, and the value of @code{.Last.value} in R@. + +@item @samp{output} +Scripting mode. Org passes the code to an external process running +the interpreter. Org returns the contents of the standard output +stream as text results. + +When using a session, Org passes the code to the interpreter running +as an interactive Emacs inferior process. Org concatenates any text +output from the interpreter and returns the collection as a result. +@end table + +@anchor{Type} +@subheading Type + +Type tells what result types to expect from the execution of the code +block. Choose one of the options; they are mutually exclusive. The +default behavior is to automatically determine the result type. + +@table @asis +@item @samp{table} +@itemx @samp{vector} +Interpret the results as an Org table. If the result is a single +value, create a table with one row and one column. Usage example: +@samp{:results value table}. + +@cindex @samp{hlines}, header argument +In-between each table row or below the table headings, sometimes +results have horizontal lines, which are also known as ``hlines''. +The @samp{hlines} argument with the default @samp{no} value strips such lines +from the input table. For most code, this is desirable, or else +those @samp{hline} symbols raise unbound variable errors. A @samp{yes} +accepts such lines, as demonstrated in the following example. + +@example +#+NAME: many-cols +| a | b | c | +|---+---+---| +| d | e | f | +|---+---+---| +| g | h | i | + +#+NAME: no-hline +#+BEGIN_SRC python :var tab=many-cols :hlines no + return tab +#+END_SRC + +#+RESULTS: no-hline +| a | b | c | +| d | e | f | +| g | h | i | + +#+NAME: hlines +#+BEGIN_SRC python :var tab=many-cols :hlines yes + return tab +#+END_SRC + +#+RESULTS: hlines +| a | b | c | +|---+---+---| +| d | e | f | +|---+---+---| +| g | h | i | +@end example + +@item @samp{list} +Interpret the results as an Org list. If the result is a single +value, create a list of one element. + +@item @samp{scalar} +@itemx @samp{verbatim} +Interpret literally and insert as quoted text. Do not create +a table. Usage example: @samp{:results value verbatim}. + +@item @samp{file} +Interpret as a filename. Save the results of execution of the code +block to that file, then insert a link to it. You can control both +the filename and the description associated to the link. + +@cindex @samp{file}, header argument +@cindex @samp{output-dir}, header argument +Org first tries to generate the filename from the value of the +@samp{file} header argument and the directory specified using the +@samp{output-dir} header arguments. If @samp{output-dir} is not specified, +Org assumes it is the current directory. + +@example +#+BEGIN_SRC asymptote :results value file :file circle.pdf :output-dir img/ + size(2cm); + draw(unitcircle); +#+END_SRC +@end example + +@cindex @samp{file-ext}, header argument +If @samp{file} header argument is missing, Org generates the base name of +the output file from the name of the code block, and its extension +from the @samp{file-ext} header argument. In that case, both the name +and the extension are mandatory. + +@example +#+name: circle +#+BEGIN_SRC asymptote :results value file :file-ext pdf + size(2cm); + draw(unitcircle); +#+END_SRC +@end example + +@cindex @samp{file-desc}, header argument +The @samp{file-desc} header argument defines the description (see @ref{Link Format}) for the link. If @samp{file-desc} is present but has no value, +the @samp{file} value is used as the link description. When this +argument is not present, the description is omitted. If you want to +provide the @samp{file-desc} argument but omit the description, you can +provide it with an empty vector (i.e., :file-desc []). + +@cindex @samp{sep}, header argument +By default, Org assumes that a table written to a file has +TAB-delimited output. You can choose a different separator with +the @samp{sep} header argument. + +@cindex @samp{file-mode}, header argument +The @samp{file-mode} header argument defines the file permissions. To +make it executable, use @samp{:file-mode (identity #o755)}. + +@example +#+BEGIN_SRC shell :results file :file script.sh :file-mode (identity #o755) + echo "#!/bin/bash" + echo "echo Hello World" +#+END_SRC +@end example +@end table + +@anchor{Format} +@subheading Format + +Format pertains to the type of the result returned by the code block. +Choose one of the options; they are mutually exclusive. The default +follows from the type specified above. + +@table @asis +@item @samp{code} +Result enclosed in a code block. Useful for parsing. Usage +example: @samp{:results value code}. + +@item @samp{drawer} +Result wrapped in a @samp{RESULTS} drawer. Useful for containing @samp{raw} +or @samp{org} results for later scripting and automated processing. +Usage example: @samp{:results value drawer}. + +@item @samp{html} +Results enclosed in a @samp{BEGIN_EXPORT html} block. Usage example: +@samp{:results value html}. + +@item @samp{latex} +Results enclosed in a @samp{BEGIN_EXPORT latex} block. Usage example: +@samp{:results value latex}. + +@item @samp{link} +@itemx @samp{graphics} +When used along with @samp{file} type, the result is a link to the file +specified in @samp{:file} header argument. However, unlike plain @samp{file} +type, nothing is written to the disk. The block is used for its +side-effects only, as in the following example: + +@example +#+begin_src shell :results file link :file "download.tar.gz" +wget -c "https://example.com/download.tar.gz" +#+end_src +@end example + +@item @samp{org} +Results enclosed in a @samp{BEGIN_SRC org} block. For comma-escape, +either @kbd{@key{TAB}} in the block, or export the file. Usage +example: @samp{:results value org}. + +@item @samp{pp} +Result converted to pretty-print source code. Enclosed in a code +block. Languages supported: Emacs Lisp, Python, and Ruby. Usage +example: @samp{:results value pp}. + +@item @samp{raw} +Interpreted as raw Org mode. Inserted directly into the buffer. +Aligned if it is a table. Usage example: @samp{:results value raw}. +@end table + +@cindex @samp{wrap}, header argument +The @samp{wrap} header argument unconditionally marks the results block by +appending strings to @samp{#+BEGIN_} and @samp{#+END_}. If no string is +specified, Org wraps the results in a @samp{#+BEGIN_results} +@dots{} @samp{#+END_results} block. It takes precedent over the @samp{results} +value listed above. E.g., + +@example +#+BEGIN_SRC emacs-lisp :results html :wrap EXPORT markdown +"Welcome back to the 90's" +#+END_SRC + +#+RESULTS: +#+BEGIN_EXPORT markdown +Welcome back to the 90's +#+END_EXPORT +@end example + +@anchor{Handling} +@subheading Handling + +Handling options after collecting the results. + +@table @asis +@item @samp{replace} +Default. Insert results in the Org buffer. Remove previous +results. Usage example: @samp{:results output replace}. + +@item @samp{silent} +Do not insert results in the Org mode buffer, but echo them in the +minibuffer. Usage example: @samp{:results output silent}. + +@item @samp{none} +Do not process results at all. No inserting in the Org mode buffer +nor echo them in the minibuffer. Usage example: @samp{:results none}. + +@item @samp{append} +Append results to the Org buffer. Latest results are at the bottom. +Does not remove previous results. Usage example: @samp{:results output + append}. + +@item @samp{prepend} +Prepend results to the Org buffer. Latest results are at the top. +Does not remove previous results. Usage example: @samp{:results output + prepend}. +@end table + +@anchor{Post-processing} +@subheading Post-processing + +@cindex @samp{post}, header argument +@cindex @samp{*this*}, in @samp{post} header argument +The @samp{post} header argument is for post-processing results from block +evaluation. When @samp{post} has any value, Org binds the results to +@code{*this*} variable for easy passing to @samp{var} header argument +specifications (see @ref{Environment of a Code Block}). That makes results +available to other code blocks, or even for direct Emacs Lisp code +execution. + +The following two examples illustrate @samp{post} header argument in +action. The first one shows how to attach an @samp{ATTR_LATEX} keyword +using @samp{post}. + +@example +#+NAME: attr_wrap +#+BEGIN_SRC sh :var data="" :var width="\\textwidth" :results output + echo "#+ATTR_LATEX: :width $width" + echo "$data" +#+END_SRC + +#+HEADER: :file /tmp/it.png +#+BEGIN_SRC dot :post attr_wrap(width="5cm", data=*this*) :results drawer + digraph@{ + a -> b; + b -> c; + c -> a; + @} +#+end_src + +#+RESULTS: +:RESULTS: +#+ATTR_LATEX :width 5cm +[[file:/tmp/it.png]] +:END: +@end example + +The second example shows use of @samp{colnames} header argument in @samp{post} +to pass data between code blocks. + +@example +#+NAME: round-tbl +#+BEGIN_SRC emacs-lisp :var tbl="" fmt="%.3f" + (mapcar (lambda (row) + (mapcar (lambda (cell) + (if (numberp cell) + (format fmt cell) + cell)) + row)) + tbl) +#+end_src + +#+BEGIN_SRC R :colnames yes :post round-tbl[:colnames yes](*this*) + set.seed(42) + data.frame(foo=rnorm(1)) +#+END_SRC + +#+RESULTS: +| foo | +|-------| +| 1.371 | +@end example + +@node Exporting Code Blocks +@section Exporting Code Blocks + +@cindex code block, exporting +@cindex source code, exporting + +It is possible to export the @emph{code} of code blocks, the @emph{results} of +code block evaluation, @emph{both} the code and the results of code block +evaluation, or @emph{none}. Org defaults to exporting @emph{code} for most +languages. For some languages, such as ditaa, Org defaults to +@emph{results}. To export just the body of code blocks, see @ref{Literal Examples}. To selectively export sub-trees of an Org document, see +@ref{Exporting}. + +@cindex @samp{exports}, header argument +The @samp{exports} header argument is to specify if that part of the Org +file is exported to, say, HTML or @LaTeX{} formats. + +@table @asis +@item @samp{code} +The default. The body of code is included into the exported file. +Example: @samp{:exports code}. + +@item @samp{results} +The results of evaluation of the code is included in the exported +file. Example: @samp{:exports results}. + +@item @samp{both} +Both the code and results of evaluation are included in the exported +file. Example: @samp{:exports both}. + +@item @samp{none} +Neither the code nor the results of evaluation is included in the +exported file. Whether the code is evaluated at all depends on +other options. Example: @samp{:exports none}. +@end table + +@vindex org-export-use-babel +To stop Org from evaluating code blocks to speed exports, use the +header argument @samp{:eval never-export} (see @ref{Evaluating Code Blocks}). +To stop Org from evaluating code blocks for greater security, set the +@code{org-export-use-babel} variable to @code{nil}, but understand that header +arguments will have no effect. + +Turning off evaluation comes in handy when batch processing. For +example, markup languages for wikis, which have a high risk of +untrusted code. Stopping code block evaluation also stops evaluation +of all header arguments of the code block. This may not be desirable +in some circumstances. So during export, to allow evaluation of just +the header arguments but not any code evaluation in the source block, +set @samp{:eval never-export} (see @ref{Evaluating Code Blocks}). + +Org never evaluates code blocks in commented sub-trees when exporting +(see @ref{Comment Lines}). On the other hand, Org does evaluate code +blocks in sub-trees excluded from export (see @ref{Export Settings}). + +@node Extracting Source Code +@section Extracting Source Code + +@cindex tangling +@cindex source code, extracting +@cindex code block, extracting source code + +Extracting source code from code blocks is a basic task in literate +programming. Org has features to make this easy. In literate +programming parlance, documents on creation are @emph{woven} with code and +documentation, and on export, the code is tangled for execution by +a computer. Org facilitates weaving and tangling for producing, +maintaining, sharing, and exporting literate programming documents. +Org provides extensive customization options for extracting source +code. + +When Org tangles code blocks, it expands, merges, and transforms them. +Then Org recomposes them into one or more separate files, as +configured through the options. During this tangling process, Org +expands variables in the source code, and resolves any noweb style +references (see @ref{Noweb Reference Syntax}). + +@anchor{Header arguments} +@subheading Header arguments + +@cindex @samp{tangle}, header argument +The @samp{tangle} header argument specifies if the code block is exported +to source file(s). + +@table @asis +@item @samp{yes} +Export the code block to source file. The file name for the source +file is derived from the name of the Org file, and the file +extension is derived from the source code language identifier. +Example: @samp{:tangle yes}. + +@item @samp{no} +The default. Do not extract the code in a source code file. +Example: @samp{:tangle no}. + +@item @var{FILENAME} +Export the code block to source file whose file name is derived from +any string passed to the @samp{tangle} header argument. Org derives the +file name as being relative to the directory of the Org file's +location. Example: @samp{:tangle FILENAME}. +@end table + +@cindex @samp{mkdirp}, header argument +The @samp{mkdirp} header argument creates parent directories for tangled +files if the directory does not exist. A @samp{yes} value enables +directory creation whereas @samp{no} inhibits it. + +@cindex @samp{comments}, header argument +The @samp{comments} header argument controls inserting comments into +tangled files. These are above and beyond whatever comments may +already exist in the code block. + +@table @asis +@item @samp{no} +The default. Do not insert any extra comments during tangling. + +@item @samp{link} +Wrap the code block in comments. Include links pointing back to the +place in the Org file from where the code was tangled. + +@item @samp{yes} +Kept for backward compatibility; same as @samp{link}. + +@item @samp{org} +Nearest headline text from Org file is inserted as comment. The +exact text that is inserted is picked from the leading context of +the source block. + +@item @samp{both} +Includes both @samp{link} and @samp{org} options. + +@item @samp{noweb} +Includes @samp{link} option, expands noweb references (see @ref{Noweb Reference Syntax}), and wraps them in link comments inside the body +of the code block. +@end table + +@cindex @samp{padline}, header argument +The @samp{padline} header argument controls insertion of newlines to pad +source code in the tangled file. + +@table @asis +@item @samp{yes} +Default. Insert a newline before and after each code block in the +tangled file. + +@item @samp{no} +Do not insert newlines to pad the tangled code blocks. +@end table + +@cindex @samp{shebang}, header argument +The @samp{shebang} header argument can turn results into executable script +files. By setting it to a string value---for example, @samp{:shebang +"#!/bin/bash"}---Org inserts that string as the first line of the +tangled file that the code block is extracted to. Org then turns on +the tangled file's executable permission. + +@cindex @samp{tangle-mode}, header argument +The @samp{tangle-mode} header argument specifies what permissions to set +for tangled files by @code{set-file-modes}. For example, to make +a read-only tangled file, use @samp{:tangle-mode (identity #o444)}. To +make it executable, use @samp{:tangle-mode (identity #o755)}. It also +overrides executable permission granted by @samp{shebang}. When multiple +source code blocks tangle to a single file with different and +conflicting @samp{tangle-mode} header arguments, Org's behavior is +undefined. + +@cindex @samp{no-expand}, header argument +By default Org expands code blocks during tangling. The @samp{no-expand} +header argument turns off such expansions. Note that one side-effect +of expansion by @code{org-babel-expand-src-block} also assigns values (see +@ref{Environment of a Code Block}) to variables. Expansions also replace +noweb references with their targets (see @ref{Noweb Reference Syntax}). +Some of these expansions may cause premature assignment, hence this +option. This option makes a difference only for tangling. It has no +effect when exporting since code blocks for execution have to be +expanded anyway. + +@anchor{Functions} +@subheading Functions + +@table @asis +@item @code{org-babel-tangle} +@findex org-babel-tangle +@kindex C-c C-v t +Tangle the current file. Bound to @kbd{C-c C-v t}. + +With prefix argument only tangle the current code block. + +@item @code{org-babel-tangle-file} +@findex org-babel-tangle-file +@kindex C-c C-v f +Choose a file to tangle. Bound to @kbd{C-c C-v f}. +@end table + +@anchor{Tangle hooks} +@subheading Tangle hooks + +@table @asis +@item @code{org-babel-post-tangle-hook} +@vindex org-babel-post-tangle-hook +This hook is run from within code files tangled by +@code{org-babel-tangle}, making it suitable for post-processing, +compilation, and evaluation of code in the tangled files. +@end table + +@anchor{Jumping between code and Org} +@subheading Jumping between code and Org + +@findex org-babel-tangle-jump-to-org +Debuggers normally link errors and messages back to the source code. +But for tangled files, we want to link back to the Org file, not to +the tangled source file. To make this extra jump, Org uses +@code{org-babel-tangle-jump-to-org} function with two additional source +code block header arguments: + +@enumerate +@item +Set @samp{padline} to true---this is the default setting. +@item +Set @samp{comments} to @samp{link}, which makes Org insert links to the Org +file. +@end enumerate + +@node Languages +@section Languages + +@cindex babel, languages +@cindex source code, languages +@cindex code block, languages + +Code blocks in dozens of languages are supported. See Worg for +@uref{https://orgmode.org/worg/org-contrib/babel/languages/index.html, language specific documentation}. + +@vindex org-babel-load-languages +By default, only Emacs Lisp is enabled for evaluation. To enable or +disable other languages, customize the @code{org-babel-load-languages} +variable either through the Emacs customization interface, or by +adding code to the init file as shown next. + +In this example, evaluation is disabled for Emacs Lisp, and enabled +for R@. + +@lisp +(org-babel-do-load-languages + 'org-babel-load-languages + '((emacs-lisp . nil) + (R . t))) +@end lisp + +Note that this is not the only way to enable a language. Org also +enables languages when loaded with @code{require} statement. For example, +the following enables execution of Clojure code blocks: + +@lisp +(require 'ob-clojure) +@end lisp + +@node Editing Source Code +@section Editing Source Code + +@cindex code block, editing +@cindex source code, editing + +@kindex C-c ' +Use @kbd{C-c '} to edit the current code block. It opens a new +major mode edit buffer containing the body of the source code block, +ready for any edits. Use @kbd{C-c '} again to close the buffer +and return to the Org buffer. + +@kindex C-x C-s +@vindex org-edit-src-auto-save-idle-delay +@cindex auto-save, in code block editing +@kbd{C-x C-s} saves the buffer and updates the contents of the +Org buffer. Set @code{org-edit-src-auto-save-idle-delay} to save the base +buffer after a certain idle delay time. Set +@code{org-edit-src-turn-on-auto-save} to auto-save this buffer into +a separate file using Auto-save mode. + +While editing the source code in the major mode, the Org Src minor +mode remains active. It provides these customization variables as +described below. For even more variables, look in the customization +group @code{org-edit-structure}. + +@table @asis +@item @code{org-src-lang-modes} +@vindex org-src-lang-modes +If an Emacs major-mode named @code{-mode} exists, where +@var{} is the language identifier from code block's +header line, then the edit buffer uses that major mode. Use this +variable to arbitrarily map language identifiers to major modes. + +@item @code{org-src-window-setup} +@vindex org-src-window-setup +For specifying Emacs window arrangement when the new edit buffer is +created. + +@item @code{org-src-preserve-indentation} +@cindex indentation, in code blocks +@vindex org-src-preserve-indentation +Default is @code{nil}. Source code is indented. This indentation +applies during export or tangling, and depending on the context, may +alter leading spaces and tabs. When non-@code{nil}, source code is +aligned with the leftmost column. No lines are modified during +export or tangling, which is very useful for white-space sensitive +languages, such as Python. + +@item @code{org-src-ask-before-returning-to-edit-buffer} +@vindex org-src-ask-before-returning-to-edit-buffer +When @code{nil}, Org returns to the edit buffer without further prompts. +The default prompts for a confirmation. +@end table + +@vindex org-src-fontify-natively +@vindex org-src-block-faces +Set @code{org-src-fontify-natively} to non-@code{nil} to turn on native code +fontification in the @emph{Org} buffer. Fontification of code blocks can +give visual separation of text and code on the display page. To +further customize the appearance of @code{org-block} for specific +languages, customize @code{org-src-block-faces}. The following example +shades the background of regular blocks, and colors source blocks only +for Python and Emacs Lisp languages. + +@lisp +(require 'color) +(set-face-attribute 'org-block nil :background + (color-darken-name + (face-attribute 'default :background) 3)) + +(setq org-src-block-faces '(("emacs-lisp" (:background "#EEE2FF")) + ("python" (:background "#E5FFB8")))) +@end lisp + +@node Noweb Reference Syntax +@section Noweb Reference Syntax + +@cindex code block, noweb reference +@cindex syntax, noweb +@cindex source code, noweb reference + +@cindex @samp{noweb-ref}, header argument +Source code blocks can include references to other source code blocks, +using a noweb@footnote{For noweb literate programming details, see +@uref{http://www.cs.tufts.edu/~nr/noweb/}.} style syntax: + +@example +<> +@end example + + +@noindent +where @var{CODE-BLOCK-ID} refers to either the @samp{NAME} of a single +source code block, or a collection of one or more source code blocks +sharing the same @samp{noweb-ref} header argument (see @ref{Using Header Arguments}). Org can replace such references with the source code of +the block or blocks being referenced, or, in the case of a single +source code block named with @samp{NAME}, with the results of an evaluation +of that block. + +@cindex @samp{noweb}, header argument +The @samp{noweb} header argument controls expansion of noweb syntax +references. Expansions occur when source code blocks are evaluated, +tangled, or exported. + +@table @asis +@item @samp{no} +Default. No expansion of noweb syntax references in the body of the +code when evaluating, tangling, or exporting. + +@item @samp{yes} +Expansion of noweb syntax references in the body of the code block +when evaluating, tangling, or exporting. + +@item @samp{tangle} +Expansion of noweb syntax references in the body of the code block +when tangling. No expansion when evaluating or exporting. + +@item @samp{no-export} +Expansion of noweb syntax references in the body of the code block +when evaluating or tangling. No expansion when exporting. + +@item @samp{strip-export} +Expansion of noweb syntax references in the body of the code block +when expanding prior to evaluating or tangling. Removes noweb +syntax references when exporting. + +@item @samp{eval} +Expansion of noweb syntax references in the body of the code block +only before evaluating. +@end table + +In the most simple case, the contents of a single source block is +inserted within other blocks. Thus, in following example, + +@example +#+NAME: initialization +#+BEGIN_SRC emacs-lisp + (setq sentence "Never a foot too far, even.") +#+END_SRC + +#+BEGIN_SRC emacs-lisp :noweb yes + <> + (reverse sentence) +#+END_SRC +@end example + +@noindent +the second code block is expanded as + +@example +#+BEGIN_SRC emacs-lisp :noweb yes + (setq sentence "Never a foot too far, even.") + (reverse sentence) +#+END_SRC +@end example + +You may also include the contents of multiple blocks sharing a common +@samp{noweb-ref} header argument, which can be set at the file, sub-tree, +or code block level. In the example Org file shown next, the body of +the source code in each block is extracted for concatenation to a pure +code file when tangled. + +@example +#+BEGIN_SRC sh :tangle yes :noweb yes :shebang #!/bin/sh + <> +#+END_SRC +* the mount point of the fullest disk + :PROPERTIES: + :header-args: :noweb-ref fullest-disk + :END: + +** query all mounted disks +#+BEGIN_SRC sh + df \ +#+END_SRC + +** strip the header row +#+BEGIN_SRC sh + |sed '1d' \ +#+END_SRC + +** output mount point of fullest disk +#+BEGIN_SRC sh + |awk '@{if (u < +$5) @{u = +$5; m = $6@}@} END @{print m@}' +#+END_SRC +@end example + +@cindex @samp{noweb-sep}, header argument +By default a newline separates each noweb reference concatenation. To +use a different separator, edit the @samp{noweb-sep} header argument. + +Alternatively, Org can include the results of evaluation of a single +code block rather than its body. Evaluation occurs when parentheses, +possibly including arguments, are appended to the code block name, as +shown below. + +@example +<> +@end example + + +Note that in this case, a code block name set by @samp{NAME} keyword is +required; the reference set by @samp{noweb-ref} will not work when +evaluation is desired. + +Here is an example that demonstrates how the exported content changes +when noweb style references are used with parentheses versus without. +Given: + +@example +#+NAME: some-code +#+BEGIN_SRC python :var num=0 :results output :exports none + print(num*10) +#+END_SRC +@end example + +@noindent +this code block: + +@example +#+BEGIN_SRC text :noweb yes + <> +#+END_SRC +@end example + +@noindent +expands to: + +@example +print(num*10) +@end example + + +Below, a similar noweb style reference is used, but with parentheses, +while setting a variable @samp{num} to 10: + +@example +#+BEGIN_SRC text :noweb yes + <> +#+END_SRC +@end example + +@noindent +Note that the expansion now contains the results of the code block +@samp{some-code}, not the code block itself: + +@example +100 +@end example + + +Noweb insertions honor prefix characters that appear before the noweb +syntax reference. This behavior is illustrated in the following +example. Because the @samp{<>} noweb reference appears behind the +SQL comment syntax, each line of the expanded noweb reference is +commented. With: + +@example +#+NAME: example +#+BEGIN_SRC text + this is the + multi-line body of example +#+END_SRC +@end example + +@noindent +this code block: + +@example +#+BEGIN_SRC sql :noweb yes + ---<> +#+END_SRC +@end example + +@noindent +expands to: + +@example +#+BEGIN_SRC sql :noweb yes + ---this is the + ---multi-line body of example +#+END_SRC +@end example + +Since this change does not affect noweb replacement text without +newlines in them, inline noweb references are acceptable. + +This feature can also be used for management of indentation in +exported code snippets. With: + +@example +#+NAME: if-true +#+BEGIN_SRC python :exports none + print('do things when true') +#+end_src + +#+name: if-false +#+begin_src python :exports none + print('do things when false') +#+end_src +@end example + +@noindent +this code block: + +@example +#+begin_src python :noweb yes :results output + if true: + <> + else: + <> +#+end_src +@end example + +@noindent +expands to: + +@example +if true: + print('do things when true') +else: + print('do things when false') +@end example + +When in doubt about the outcome of a source code block expansion, you +can preview the results with the following command: + +@table @asis +@item @kbd{C-c C-v v} or @kbd{C-c C-v C-v} (@code{org-babel-expand-src-block}) +@findex org-babel-expand-src-block +@kindex C-c C-v v +@kindex C-c C-v C-v +Expand the current source code block according to its header +arguments and pop open the results in a preview buffer. +@end table + +@node Library of Babel +@section Library of Babel + +@cindex babel, library of +@cindex source code, library +@cindex code block, library + +The ``Library of Babel'' is a collection of code blocks. Like +a function library, these code blocks can be called from other Org +files. A collection of useful code blocks is available on @uref{https://orgmode.org/worg/library-of-babel.html, Worg}. For +remote code block evaluation syntax, see @ref{Evaluating Code Blocks}. + +@kindex C-c C-v i +@findex org-babel-lob-ingest +For any user to add code to the library, first save the code in +regular code blocks of an Org file, and then load the Org file with +@code{org-babel-lob-ingest}, which is bound to @kbd{C-c C-v i}. + +@node Key bindings and Useful Functions +@section Key bindings and Useful Functions + +@cindex code block, key bindings + +Many common Org mode key sequences are re-bound depending on +the context. + +Active key bindings in code blocks: + +@kindex C-c C-c +@findex org-babel-execute-src-block +@kindex C-c C-o +@findex org-babel-open-src-block-result +@kindex M-UP +@findex org-babel-load-in-session +@kindex M-DOWN +@findex org-babel-pop-to-session +@multitable @columnfractions 0.2 0.55 +@headitem Key binding +@tab Function +@item @kbd{C-c C-c} +@tab @code{org-babel-execute-src-block} +@item @kbd{C-c C-o} +@tab @code{org-babel-open-src-block-result} +@item @kbd{M-@key{UP}} +@tab @code{org-babel-load-in-session} +@item @kbd{M-@key{DOWN}} +@tab @code{org-babel-pop-to-session} +@end multitable + +Active key bindings in Org mode buffer: + +@kindex C-c C-v p +@kindex C-c C-v C-p +@kindex C-c C-v n +@kindex C-c C-v C-n +@kindex C-c C-v e +@kindex C-c C-v C-e +@kindex C-c C-v o +@kindex C-c C-v C-o +@kindex C-c C-v v +@kindex C-c C-v C-v +@kindex C-c C-v u +@kindex C-c C-v C-u +@kindex C-c C-v g +@kindex C-c C-v C-g +@kindex C-c C-v r +@kindex C-c C-v C-r +@kindex C-c C-v b +@kindex C-c C-v C-b +@kindex C-c C-v s +@kindex C-c C-v C-s +@kindex C-c C-v d +@kindex C-c C-v C-d +@kindex C-c C-v t +@kindex C-c C-v C-t +@kindex C-c C-v f +@kindex C-c C-v C-f +@kindex C-c C-v c +@kindex C-c C-v C-c +@kindex C-c C-v j +@kindex C-c C-v C-j +@kindex C-c C-v l +@kindex C-c C-v C-l +@kindex C-c C-v i +@kindex C-c C-v C-i +@kindex C-c C-v I +@kindex C-c C-v C-I +@kindex C-c C-v z +@kindex C-c C-v C-z +@kindex C-c C-v a +@kindex C-c C-v C-a +@kindex C-c C-v h +@kindex C-c C-v C-h +@kindex C-c C-v x +@kindex C-c C-v C-x +@findex org-babel-previous-src-block +@findex org-babel-next-src-block +@findex org-babel-execute-maybe +@findex org-babel-open-src-block-result +@findex org-babel-expand-src-block +@findex org-babel-goto-src-block-head +@findex org-babel-goto-named-src-block +@findex org-babel-goto-named-result +@findex org-babel-execute-buffer +@findex org-babel-execute-subtree +@findex org-babel-demarcate-block +@findex org-babel-tangle +@findex org-babel-tangle-file +@findex org-babel-check-src-block +@findex org-babel-insert-header-arg +@findex org-babel-load-in-session +@findex org-babel-lob-ingest +@findex org-babel-view-src-block-info +@findex org-babel-switch-to-session-with-code +@findex org-babel-sha1-hash +@findex org-babel-describe-bindings +@findex org-babel-do-key-sequence-in-edit-buffer +@multitable @columnfractions 0.45 0.55 +@headitem Key binding +@tab Function +@item @kbd{C-c C-v p} or @kbd{C-c C-v C-p} +@tab @code{org-babel-previous-src-block} +@item @kbd{C-c C-v n} or @kbd{C-c C-v C-n} +@tab @code{org-babel-next-src-block} +@item @kbd{C-c C-v e} or @kbd{C-c C-v C-e} +@tab @code{org-babel-execute-maybe} +@item @kbd{C-c C-v o} or @kbd{C-c C-v C-o} +@tab @code{org-babel-open-src-block-result} +@item @kbd{C-c C-v v} or @kbd{C-c C-v C-v} +@tab @code{org-babel-expand-src-block} +@item @kbd{C-c C-v u} or @kbd{C-c C-v C-u} +@tab @code{org-babel-goto-src-block-head} +@item @kbd{C-c C-v g} or @kbd{C-c C-v C-g} +@tab @code{org-babel-goto-named-src-block} +@item @kbd{C-c C-v r} or @kbd{C-c C-v C-r} +@tab @code{org-babel-goto-named-result} +@item @kbd{C-c C-v b} or @kbd{C-c C-v C-b} +@tab @code{org-babel-execute-buffer} +@item @kbd{C-c C-v s} or @kbd{C-c C-v C-s} +@tab @code{org-babel-execute-subtree} +@item @kbd{C-c C-v d} or @kbd{C-c C-v C-d} +@tab @code{org-babel-demarcate-block} +@item @kbd{C-c C-v t} or @kbd{C-c C-v C-t} +@tab @code{org-babel-tangle} +@item @kbd{C-c C-v f} or @kbd{C-c C-v C-f} +@tab @code{org-babel-tangle-file} +@item @kbd{C-c C-v c} or @kbd{C-c C-v C-c} +@tab @code{org-babel-check-src-block} +@item @kbd{C-c C-v j} or @kbd{C-c C-v C-j} +@tab @code{org-babel-insert-header-arg} +@item @kbd{C-c C-v l} or @kbd{C-c C-v C-l} +@tab @code{org-babel-load-in-session} +@item @kbd{C-c C-v i} or @kbd{C-c C-v C-i} +@tab @code{org-babel-lob-ingest} +@item @kbd{C-c C-v I} or @kbd{C-c C-v C-I} +@tab @code{org-babel-view-src-block-info} +@item @kbd{C-c C-v z} or @kbd{C-c C-v C-z} +@tab @code{org-babel-switch-to-session-with-code} +@item @kbd{C-c C-v a} or @kbd{C-c C-v C-a} +@tab @code{org-babel-sha1-hash} +@item @kbd{C-c C-v h} or @kbd{C-c C-v C-h} +@tab @code{org-babel-describe-bindings} +@item @kbd{C-c C-v x} or @kbd{C-c C-v C-x} +@tab @code{org-babel-do-key-sequence-in-edit-buffer} +@end multitable + +@node Batch Execution +@section Batch Execution + +@cindex code block, batch execution +@cindex source code, batch execution + +Org mode features, including working with source code facilities can +be invoked from the command line. This enables building shell scripts +for batch processing, running automated system tasks, and expanding +Org mode's usefulness. + +The sample script shows batch processing of multiple files using +@code{org-babel-tangle}. + +@example +#!/bin/sh +# Tangle files with Org mode +# +emacs -Q --batch --eval " + (progn + (require 'ob-tangle) + (dolist (file command-line-args-left) + (with-current-buffer (find-file-noselect file) + (org-babel-tangle)))) + " "$@@" +@end example + +@node Miscellaneous +@chapter Miscellaneous + +@menu +* Completion:: @kbd{M-@key{TAB}} guesses completions. +* Structure Templates:: Quick insertion of structural elements. +* Speed Keys:: Electric commands at the beginning of a headline. +* Clean View:: Getting rid of leading stars in the outline. +* Execute commands in the active region:: Execute commands on multiple items in Org or agenda view. +* Dynamic Headline Numbering:: Display and update outline numbering. +* The Very Busy @kbd{C-c C-c} Key:: When in doubt, press @kbd{C-c C-c}. +* In-buffer Settings:: Overview of keywords. +* Regular Expressions:: Elisp regular expressions. +* Org Syntax:: Formal description of Org's syntax. +* Documentation Access:: Read documentation about current syntax. +* Escape Character:: Prevent Org from interpreting your writing. +* Code Evaluation Security:: Org files evaluate in-line code. +* Interaction:: With other Emacs packages. +* TTY Keys:: Using Org on a tty. +* Protocols:: External access to Emacs and Org. +* Org Crypt:: Encrypting Org files. +* Org Mobile:: Viewing and capture on a mobile device. +@end menu + +@node Completion +@section Completion + +@cindex completion, of @TeX{} symbols +@cindex completion, of TODO keywords +@cindex completion, of dictionary words +@cindex completion, of option keywords +@cindex completion, of tags +@cindex completion, of property keys +@cindex completion, of link abbreviations +@cindex @TeX{} symbol completion +@cindex TODO keywords completion +@cindex dictionary word completion +@cindex option keyword completion +@cindex tag completion +@cindex link abbreviations, completion of + +Org has in-buffer completions. Unlike minibuffer completions, which +are useful for quick command interactions, Org's in-buffer completions +are more suitable for content creation in Org documents. Type one or +more letters and invoke the hot key to complete the text in-place. +Depending on the context and the keys, Org offers different types of +completions. No minibuffer is involved. Such mode-specific hot keys +have become an integral part of Emacs and Org provides several +shortcuts. + +@table @asis +@item @kbd{M-@key{TAB}} +@kindex M-TAB + +Complete word at point. + +@itemize +@item +At the beginning of an empty headline, complete TODO keywords. + +@item +After @samp{\}, complete @TeX{} symbols supported by the exporter. + +@item +After @samp{:} in a headline, complete tags. Org deduces the list of +tags from the @samp{TAGS} in-buffer option (see @ref{Setting Tags}), the +variable @code{org-tag-alist}, or from all tags used in the current +buffer. + +@item +After @samp{:} and not in a headline, complete property keys. The list +of keys is constructed dynamically from all keys used in the +current buffer. + +@item +After @samp{[[}, complete link abbreviations (see @ref{Link Abbreviations}). + +@item +After @samp{[[*}, complete headlines in the current buffer so that they +can be used in search links like: @samp{[[*find this headline]]} + +@item +After @samp{#+}, complete the special keywords like @samp{TYP_TODO} or +file-specific @samp{OPTIONS}. After option keyword is complete, +pressing @kbd{M-@key{TAB}} again inserts example settings for this +keyword. + +@item +After @samp{STARTUP} keyword, complete startup items. + +@item +When point is anywhere else, complete dictionary words using +Ispell. +@end itemize +@end table + +@node Structure Templates +@section Structure Templates + +@cindex template insertion +@cindex insertion, of templates + +With just a few keystrokes, it is possible to insert empty structural +blocks, such as @samp{#+BEGIN_SRC} @dots{} @samp{#+END_SRC}, or to wrap existing +text in such a block. + +@table @asis +@item @kbd{C-c C-,} (@code{org-insert-structure-template}) +@findex org-insert-structure-template +@kindex C-c C-, +Prompt for a type of block structure, and insert the block at point. +If the region is active, it is wrapped in the block. First prompts +the user for keys, which are used to look up a structure type from +the variable below. If the key is @kbd{@key{TAB}}, @kbd{@key{RET}}, +or @kbd{@key{SPC}}, the user is prompted to enter a block type. +@end table + +@vindex org-structure-template-alist +Available structure types are defined in +@code{org-structure-template-alist}, see the docstring for adding or +changing values. + +@cindex Tempo +@cindex template expansion +@cindex insertion, of templates +@vindex org-tempo-keywords-alist +Org Tempo expands snippets to structures defined in +@code{org-structure-template-alist} and @code{org-tempo-keywords-alist}. For +example, @kbd{< s @key{TAB}} creates a code block. Enable it by +customizing @code{org-modules} or add @samp{(require 'org-tempo)} to your Emacs +init file@footnote{For more information, please refer to the commentary section +in @samp{org-tempo.el}.}. + +@multitable @columnfractions 0.1 0.9 +@item @kbd{a} +@tab @samp{#+BEGIN_EXPORT ascii} @dots{} @samp{#+END_EXPORT} +@item @kbd{c} +@tab @samp{#+BEGIN_CENTER} @dots{} @samp{#+END_CENTER} +@item @kbd{C} +@tab @samp{#+BEGIN_COMMENT} @dots{} @samp{#+END_COMMENT} +@item @kbd{e} +@tab @samp{#+BEGIN_EXAMPLE} @dots{} @samp{#+END_EXAMPLE} +@item @kbd{E} +@tab @samp{#+BEGIN_EXPORT} @dots{} @samp{#+END_EXPORT} +@item @kbd{h} +@tab @samp{#+BEGIN_EXPORT html} @dots{} @samp{#+END_EXPORT} +@item @kbd{l} +@tab @samp{#+BEGIN_EXPORT latex} @dots{} @samp{#+END_EXPORT} +@item @kbd{q} +@tab @samp{#+BEGIN_QUOTE} @dots{} @samp{#+END_QUOTE} +@item @kbd{s} +@tab @samp{#+BEGIN_SRC} @dots{} @samp{#+END_SRC} +@item @kbd{v} +@tab @samp{#+BEGIN_VERSE} @dots{} @samp{#+END_VERSE} +@end multitable + +@node Speed Keys +@section Speed Keys + +@cindex speed keys + +Single keystrokes can execute custom commands in an Org file when +point is on a headline. Without the extra burden of a meta or +modifier key, Speed Keys can speed navigation or execute custom +commands. Besides faster navigation, Speed Keys may come in handy on +small mobile devices that do not have full keyboards. Speed Keys may +also work on TTY devices known for their problems when entering Emacs +key chords. + +@vindex org-use-speed-commands +By default, Org has Speed Keys disabled. To activate Speed Keys, set +the variable @code{org-use-speed-commands} to a non-@code{nil} value. To +trigger a Speed Key, point must be at the beginning of an Org +headline, before any of the stars. + +@vindex org-speed-commands +@findex org-speed-command-help +Org comes with a pre-defined list of Speed Keys. To add or modify +Speed Keys, customize the option @code{org-speed-commands}. For more +details, see the variable's docstring. With Speed Keys activated, +@kbd{M-x org-speed-command-help}, or @kbd{?} when point is at the +beginning of an Org headline, shows currently active Speed Keys, +including the user-defined ones. + +@node Clean View +@section A Cleaner Outline View + +@cindex hiding leading stars +@cindex dynamic indentation +@cindex odd-levels-only outlines +@cindex clean outline view + +Org's outline with stars and no indents can look cluttered for short +documents. For @emph{book-like} long documents, the effect is not as +noticeable. Org provides an alternate stars and indentation scheme, +as shown on the right in the following table. It displays only one +star and indents text to line up with the heading: + +@example +* Top level headline | * Top level headline +** Second level | * Second level +*** Third level | * Third level +some text | some text +*** Third level | * Third level +more text | more text +* Another top level headline | * Another top level headline +@end example + +Org can achieve this in two ways, (1) by just displaying the buffer in +this way without changing it, or (2) by actually indenting every line +in the desired amount with hard spaces and hiding leading stars. + +@menu +* Org Indent Mode:: +* Hard indentation:: +@end menu + +@node Org Indent Mode +@subsection Org Indent Mode + +@cindex Indent mode +@findex org-indent-mode +To display the buffer in the indented view, activate Org Indent minor +mode, using @kbd{M-x org-indent-mode}. Text lines that are not +headlines are prefixed with virtual spaces to vertically align with +the headline text@footnote{Org Indent mode also sets @code{wrap-prefix} correctly for +indenting and wrapping long lines of headlines or text. This minor +mode also handles Visual Line mode and directly applied settings +through @code{word-wrap}.}. + +@vindex org-indent-indentation-per-level +To make more horizontal space, the headlines are shifted by two +characters. Configure @code{org-indent-indentation-per-level} variable for +a different number. + +@vindex org-indent-mode-turns-on-hiding-stars +@vindex org-indent-mode-turns-off-org-adapt-indentation +By default, Org Indent mode turns off @code{org-adapt-indentation} and does +hide leading stars by locally setting @code{org-hide-leading-stars} to @code{t}: +only one star on each headline is visible, the rest are masked with +the same font color as the background. If you want to customize this +default behavior, see @code{org-indent-mode-turns-on-hiding-stars} and +@code{org-indent-mode-turns-off-org-adapt-indentation}. + +@vindex org-startup-indented +To globally turn on Org Indent mode for all files, customize the +variable @code{org-startup-indented}. To control it for individual files, +use @samp{STARTUP} keyword as follows: + +@example +#+STARTUP: indent +#+STARTUP: noindent +@end example + +@node Hard indentation +@subsection Hard indentation + +It is possible to use hard spaces to achieve the indentation instead, +if the bare ASCII file should have the indented look also outside +Emacs@footnote{This works, but requires extra effort. Org Indent mode is +more convenient for most applications.}. With Org's support, you have to indent all lines to +line up with the outline headers. You would use these +settings@footnote{@code{org-adapt-indentation} can also be set to @samp{'headline-data}, +in which case only data lines below the headline will be indented.}: + +@lisp +(setq org-adapt-indentation t + org-hide-leading-stars t + org-odd-levels-only t) +@end lisp + +@table @asis +@item @emph{Indentation of text below headlines} (@code{org-adapt-indentation}) +@vindex org-adapt-indentation +The first setting modifies paragraph filling, line wrapping, and +structure editing commands to preserving or adapting the indentation +as appropriate. + +@item @emph{Hiding leading stars} (@code{org-hide-leading-stars}) +@vindex org-hide-leading-stars +@vindex org-hide, face +The second setting makes leading stars invisible by applying the +face @code{org-hide} to them. For per-file preference, use these file +@samp{STARTUP} options: + +@example +#+STARTUP: hidestars +#+STARTUP: showstars +@end example + +@item @emph{Odd levels} (@code{org-odd-levels-only}) +@vindex org-odd-levels-only +The third setting makes Org use only odd levels, 1, 3, 5, @dots{}, in +the outline to create more indentation. On a per-file level, +control this with: + +@example +#+STARTUP: odd +#+STARTUP: oddeven +@end example + +To convert a file between single and double stars layouts, use +@kbd{M-x org-convert-to-odd-levels} and @kbd{M-x org-convert-to-oddeven-levels}. +@end table + +@node Execute commands in the active region +@section Execute commands in the active region + +@vindex org-loop-over-headlines-in-active-region +When in an Org buffer and the region is active, some commands will +apply to all the subtrees in the active region. For example, hitting +@kbd{C-c C-s} when multiple headlines are within the active region will +successively prompt you for a new schedule date and time. To disable +this, set the option @code{org-loop-over-headlines-in-active-region} to +non-@code{t}, activate the region and run the command normally. + +@vindex org-agenda-loop-over-headlines-in-active-region +@code{org-agenda-loop-over-headlines-in-active-region} is the equivalent +option of the agenda buffer, where you can also use @ref{Bulk remote editing selected entries, , bulk editing of +selected entries}. + +Not all commands can loop in the active region and what subtrees or +headlines are considered can be refined: see the docstrings of these +options for more details. + +@node Dynamic Headline Numbering +@section Dynamic Headline Numbering + +@cindex Org Num mode +@cindex number headlines +The Org Num minor mode, toggled with @kbd{M-x org-num-mode}, +displays outline numbering on top of headlines. It also updates it +automatically upon changes to the structure of the document. + +@vindex org-num-max-level +@vindex org-num-skip-tags +@vindex org-num-skip-commented +@vindex org-num-skip-unnumbered +By default, all headlines are numbered. You can limit numbering to +specific headlines according to their level, tags, @samp{COMMENT} keyword, +or @samp{UNNUMBERED} property. Set @code{org-num-max-level}, +@code{org-num-skip-tags}, @code{org-num-skip-commented}, +@code{org-num-skip-unnumbered}, or @code{org-num-skip-footnotes} accordingly. + +@vindex org-num-skip-footnotes +If @code{org-num-skip-footnotes} is non-@code{nil}, footnotes sections (see +@ref{Creating Footnotes}) are not numbered either. + +@vindex org-num-face +@vindex org-num-format-function +You can control how the numbering is displayed by setting +@code{org-num-face} and @code{org-num-format-function}. + +@vindex org-startup-numerated +You can also turn this mode globally for all Org files by setting the +option @code{org-startup-numerated} to @samp{t}, or locally on a file by using +@samp{#+startup: num}. + +@node The Very Busy @kbd{C-c C-c} Key +@section The Very Busy @kbd{C-c C-c} Key + +@kindex C-c C-c +@cindex @kbd{C-c C-c}, overview + +The @kbd{C-c C-c} key in Org serves many purposes depending on +the context. It is probably the most over-worked, multi-purpose key +combination in Org. Its uses are well documented throughout this +manual, but here is a consolidated list for easy reference. + +@itemize +@item +If column view (see @ref{Column View}) is on, exit column view. + +@item +If any highlights shown in the buffer from the creation of a sparse +tree, or from clock display, remove such highlights. + +@item +If point is in one of the special @samp{KEYWORD} lines, scan the buffer +for these lines and update the information. Also reset the Org file +cache used to temporary store the contents of URLs used as values +for keywords like @samp{SETUPFILE}. + +@item +If point is inside a table, realign the table. + +@item +If point is on a @samp{TBLFM} keyword, re-apply the formulas to the +entire table. + +@item +If the current buffer is a capture buffer, close the note and file +it. With a prefix argument, also jump to the target location after +saving the note. + +@item +If point is on a @samp{<<>>}, update radio targets and +corresponding links in this buffer. + +@item +If point is on a property line or at the start or end of a property +drawer, offer property commands. + +@item +If point is at a footnote reference, go to the corresponding +definition, and @emph{vice versa}. + +@item +If point is on a statistics cookie, update it. + +@item +If point is in a plain list item with a checkbox, toggle the status +of the checkbox. + +@item +If point is on a numbered item in a plain list, renumber the ordered +list. + +@item +If point is on the @samp{#+BEGIN} line of a dynamic block, the block is +updated. + +@item +If point is at a timestamp, fix the day name in the timestamp. +@end itemize + +@node In-buffer Settings +@section Summary of In-Buffer Settings + +@cindex in-buffer settings +@cindex special keywords + +In-buffer settings start with @samp{#+}, followed by a keyword, a colon, +and then a word for each setting. Org accepts multiple settings on +the same line. Org also accepts multiple lines for a keyword. This +manual describes these settings throughout. A summary follows here. + +@cindex refresh set-up +@kbd{C-c C-c} activates any changes to the in-buffer settings. +Closing and reopening the Org file in Emacs also activates the +changes. + +@table @asis +@item @samp{#+ARCHIVE: %s_done::} +@cindex @samp{ARCHIVE}, keyword +@vindex org-archive-location +Sets the archive location of the agenda file. The corresponding +variable is @code{org-archive-location}. + +@item @samp{#+CATEGORY} +@cindex @samp{CATEGORY}, keyword +Sets the category of the agenda file, which applies to the entire +document. + +@item @samp{#+COLUMNS: %25ITEM ...} +@cindex @samp{COLUMNS}, property +Set the default format for columns view. This format applies when +columns view is invoked in locations where no @samp{COLUMNS} property +applies. + +@item @samp{#+CONSTANTS: name1=value1 ...} +@cindex @samp{CONSTANTS}, keyword +@vindex org-table-formula-constants +@vindex org-table-formula +Set file-local values for constants that table formulas can use. +This line sets the local variable +@code{org-table-formula-constants-local}. The global version of this +variable is @code{org-table-formula-constants}. + +@item @samp{#+FILETAGS: :tag1:tag2:tag3:} +@cindex @samp{FILETAGS}, keyword +Set tags that all entries in the file inherit from, including the +top-level entries. + +@item @samp{#+LINK: linkword replace} +@cindex @samp{LINK}, keyword +@vindex org-link-abbrev-alist +Each line specifies one abbreviation for one link. Use multiple +@samp{LINK} keywords for more, see @ref{Link Abbreviations}. The +corresponding variable is @code{org-link-abbrev-alist}. + +@item @samp{#+PRIORITIES: highest lowest default} +@cindex @samp{PRIORITIES}, keyword +@vindex org-priority-highest +@vindex org-priority-lowest +@vindex org-priority-default +This line sets the limits and the default for the priorities. All +three must be either letters A--Z or numbers 0--9. The highest +priority must have a lower ASCII number than the lowest priority. + +@item @samp{#+PROPERTY: Property_Name Value} +@cindex @samp{PROPERTY}, keyword +This line sets a default inheritance value for entries in the +current buffer, most useful for specifying the allowed values of +a property. + +@item @samp{#+SETUPFILE: file} +@cindex @samp{SETUPFILE}, keyword +The setup file or a URL pointing to such file is for additional +in-buffer settings. Org loads this file and parses it for any +settings in it only when Org opens the main file. If URL is +specified, the contents are downloaded and stored in a temporary +file cache. @kbd{C-c C-c} on the settings line parses and +loads the file, and also resets the temporary file cache. Org also +parses and loads the document during normal exporting process. Org +parses the contents of this document as if it was included in the +buffer. It can be another Org file. To visit the file---not +a URL---use @kbd{C-c '} while point is on the line with the +file name. + +@item @samp{#+STARTUP:} +@cindex @samp{STARTUP}, keyword +Startup options Org uses when first visiting a file. + +@vindex org-startup-folded +The first set of options deals with the initial visibility of the +outline tree. The corresponding variable for global default +settings is @code{org-startup-folded} with a default value of +@code{showeverything}. + +@multitable {aaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{overview} +@tab Top-level headlines only. +@item @samp{content} +@tab All headlines. +@item @samp{showall} +@tab No folding on any entry. +@item @samp{show2levels} +@tab Headline levels 1-2. +@item @samp{show3levels} +@tab Headline levels 1-3. +@item @samp{show4levels} +@tab Headline levels 1-4. +@item @samp{show5levels} +@tab Headline levels 1-5. +@item @samp{showeverything} +@tab Show even drawer contents. +@end multitable + +@vindex org-startup-indented +Dynamic virtual indentation is controlled by the variable +@code{org-startup-indented}@footnote{Note that Org Indent mode also sets the @code{wrap-prefix} +property, such that Visual Line mode (or purely setting @code{word-wrap}) +wraps long lines, including headlines, correctly indented.}. + +@multitable {aaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{indent} +@tab Start with Org Indent mode turned on. +@item @samp{noindent} +@tab Start with Org Indent mode turned off. +@end multitable + +@vindex org-startup-numerated +Dynamic virtual numeration of headlines is controlled by the variable +@code{org-startup-numerated}. + +@multitable {aaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{num} +@tab Start with Org num mode turned on. +@item @samp{nonum} +@tab Start with Org num mode turned off. +@end multitable + +@vindex org-startup-align-all-tables +Aligns tables consistently upon visiting a file. The +corresponding variable is @code{org-startup-align-all-tables} with +@code{nil} as default value. + +@multitable {aaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{align} +@tab Align all tables. +@item @samp{noalign} +@tab Do not align tables on startup. +@end multitable + +@vindex org-startup-shrink-all-tables +Shrink table columns with a width cookie. The corresponding +variable is @code{org-startup-shrink-all-tables} with @code{nil} as +default value. + +@vindex org-startup-with-inline-images +When visiting a file, inline images can be automatically +displayed. The corresponding variable is +@code{org-startup-with-inline-images}, with a default value @code{nil} to +avoid delays when visiting a file. + +@multitable {aaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{inlineimages} +@tab Show inline images. +@item @samp{noinlineimages} +@tab Do not show inline images on startup. +@end multitable + +@vindex org-log-done +@vindex org-log-note-clock-out +@vindex org-log-repeat +Logging the closing and reopening of TODO items and clock +intervals can be configured using these options (see variables +@code{org-log-done}, @code{org-log-note-clock-out}, and @code{org-log-repeat}). + +@multitable {aaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{logdone} +@tab Record a timestamp when an item is marked as done. +@item @samp{lognotedone} +@tab Record timestamp and a note when DONE@. +@item @samp{nologdone} +@tab Do not record when items are marked as done. +@item @samp{logrepeat} +@tab Record a time when reinstating a repeating item. +@item @samp{lognoterepeat} +@tab Record a note when reinstating a repeating item. +@item @samp{nologrepeat} +@tab Do not record when reinstating repeating item. +@item @samp{lognoteclock-out} +@tab Record a note when clocking out. +@item @samp{nolognoteclock-out} +@tab Do not record a note when clocking out. +@item @samp{logreschedule} +@tab Record a timestamp when scheduling time changes. +@item @samp{lognotereschedule} +@tab Record a note when scheduling time changes. +@item @samp{nologreschedule} +@tab Do not record when a scheduling date changes. +@item @samp{logredeadline} +@tab Record a timestamp when deadline changes. +@item @samp{lognoteredeadline} +@tab Record a note when deadline changes. +@item @samp{nologredeadline} +@tab Do not record when a deadline date changes. +@item @samp{logrefile} +@tab Record a timestamp when refiling. +@item @samp{lognoterefile} +@tab Record a note when refiling. +@item @samp{nologrefile} +@tab Do not record when refiling. +@end multitable + +@vindex org-hide-leading-stars +@vindex org-odd-levels-only +Here are the options for hiding leading stars in outline +headings, and for indenting outlines. The corresponding +variables are @code{org-hide-leading-stars} and +@code{org-odd-levels-only}, both with a default setting @code{nil} +(meaning @samp{showstars} and @samp{oddeven}). + +@multitable {aaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{hidestars} +@tab Make all but one of the stars starting a headline invisible. +@item @samp{showstars} +@tab Show all stars starting a headline. +@item @samp{indent} +@tab Virtual indentation according to outline level. +@item @samp{noindent} +@tab No virtual indentation according to outline level. +@item @samp{odd} +@tab Allow only odd outline levels (1, 3, @dots{}). +@item @samp{oddeven} +@tab Allow all outline levels. +@end multitable + +@vindex org-put-time-stamp-overlays +@vindex org-time-stamp-overlay-formats +To turn on custom format overlays over timestamps (variables +@code{org-put-time-stamp-overlays} and +@code{org-time-stamp-overlay-formats}), use: + +@multitable {aaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{customtime} +@tab Overlay custom time format. +@end multitable + +@vindex constants-unit-system +The following options influence the table spreadsheet (variable +@code{constants-unit-system}). + +@multitable {aaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{constcgs} +@tab @samp{constants.el} should use the c-g-s unit system. +@item @samp{constSI} +@tab @samp{constants.el} should use the SI unit system. +@end multitable + +@vindex org-footnote-define-inline +@vindex org-footnote-auto-label +@vindex org-footnote-auto-adjust +To influence footnote settings, use the following keywords. The +corresponding variables are @code{org-footnote-define-inline}, +@code{org-footnote-auto-label}, and @code{org-footnote-auto-adjust}. + +@multitable {aaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{fninline} +@tab Define footnotes inline. +@item @samp{fnnoinline} +@tab Define footnotes in separate section. +@item @samp{fnlocal} +@tab Define footnotes near first reference, but not inline. +@item @samp{fnprompt} +@tab Prompt for footnote labels. +@item @samp{fnauto} +@tab Create @samp{[fn:1]}-like labels automatically (default). +@item @samp{fnconfirm} +@tab Offer automatic label for editing or confirmation. +@item @samp{fnadjust} +@tab Automatically renumber and sort footnotes. +@item @samp{nofnadjust} +@tab Do not renumber and sort automatically. +@end multitable + +@vindex org-hide-block-startup +To hide blocks on startup, use these keywords. The +corresponding variable is @code{org-hide-block-startup}. + +@multitable {aaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{hideblocks} +@tab Hide all begin/end blocks on startup. +@item @samp{nohideblocks} +@tab Do not hide blocks on startup. +@end multitable + +@vindex org-pretty-entities +The display of entities as UTF-8 characters is governed by the +variable @code{org-pretty-entities} and the keywords + +@multitable {aaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{entitiespretty} +@tab Show entities as UTF-8 characters where possible. +@item @samp{entitiesplain} +@tab Leave entities plain. +@end multitable + +@item @samp{#+TAGS: TAG1(c1) TAG2(c2)} +@cindex @samp{TAGS}, keyword +@vindex org-tag-alist +These lines (several such lines are allowed) specify the valid tags +in this file, and (potentially) the corresponding @emph{fast tag +selection} keys. The corresponding variable is @code{org-tag-alist}. + +@item @samp{#+TODO:} +@itemx @samp{#+SEQ_TODO:} +@itemx @samp{#+TYP_TODO:} +@cindex @samp{SEQ_TODO}, keyword +@cindex @samp{TODO}, keyword +@cindex @samp{TYP_TODO}, keyword +@vindex org-todo-keywords +These lines set the TODO keywords and their interpretation in the +current file. The corresponding variable is @code{org-todo-keywords}. +@end table + +@node Regular Expressions +@section Regular Expressions + +@cindex regular expressions syntax +@cindex regular expressions, in searches + +Org, as an Emacs mode, makes use of Elisp regular expressions for +searching, matching and filtering. Elisp regular expressions have a +somewhat different syntax then some common standards. Most notably, +alternation is indicated using @samp{\|} and matching groups are denoted by +@samp{\(...\)}. For example the string @samp{home\|work} matches either @samp{home} +or @samp{work}. + +For more information, see @ref{Regexps,Regular Expressions in Emacs,,emacs,}. + +@node Org Syntax +@section Org Syntax + +A reference document providing a formal description of Org's syntax is +available as @uref{https://orgmode.org/worg/dev/org-syntax.html, a draft on Worg}, written and maintained by Nicolas +Goaziou. It defines Org's core internal concepts such as ``headlines'', +``sections'', ``affiliated keywords'', ``(greater) elements'' and ``objects''. +Each part of an Org document belongs to one of the previous +categories. + +To explore the abstract structure of an Org buffer, run this in +a buffer: + +@example +M-: (org-element-parse-buffer) +@end example + + +@noindent +It outputs a list containing the buffer's content represented as an +abstract structure. The export engine relies on the information +stored in this list. Most interactive commands---e.g., for structure +editing---also rely on the syntactic meaning of the surrounding +context. + +@cindex syntax checker +@cindex linter +@findex org-lint +You can probe the syntax of your documents with the command + +@example +M-x org-lint +@end example + + +@noindent +It runs a number of checks to find common mistakes. It then displays +their location in a dedicated buffer, along with a description and +a ``trust level'', since false-positive are possible. From there, you +can operate on the reports with the following keys: + +@multitable @columnfractions 0.22 0.78 +@item @kbd{C-j}, @kbd{@key{TAB}} +@tab Display the offending line +@item @kbd{@key{RET}} +@tab Move point to the offending line +@item @kbd{g} +@tab Check the document again +@item @kbd{h} +@tab Hide all reports from the same checker +@item @kbd{i} +@tab Also remove them from all subsequent checks +@item @kbd{S} +@tab Sort reports by the column at point +@end multitable + +@node Documentation Access +@section Context Dependent Documentation + +@cindex documentation +@cindex Info + +@findex org-info-find-node +@kindex C-c C-x I +@kbd{C-c C-x I} in an Org file tries to open a suitable section +of the Org manual depending on the syntax at point. For example, +using it on a headline displays ``Document Structure'' section. + +@kbd{q} closes the Info window. + +@node Escape Character +@section Escape Character + +@cindex escape character +@cindex zero width space +You may sometimes want to write text that looks like Org syntax, but +should really read as plain text. Org may use a specific escape +character in some situations, i.e., a backslash in macros (see @ref{Macro Replacement}) and links (see @ref{Link Format}), or a comma in source and +example blocks (see @ref{Literal Examples}). In the general case, however, +we suggest to use the zero width space. You can insert one with any +of the following: + +@example +C-x 8 zero width space +C-x 8 200B +@end example + + +For example, in order to write @samp{[[1,2]]} as-is in your document, you +may write instead + +@example +[X[1,2]] +@end example + + +where @samp{X} denotes the zero width space character. + +@node Code Evaluation Security +@section Code Evaluation and Security Issues + +Unlike plain text, running code comes with risk. Each source code +block, in terms of risk, is equivalent to an executable file. Org +therefore puts a few confirmation prompts by default. This is to +alert the casual user from accidentally running untrusted code. + +For users who do not run code blocks or write code regularly, Org's +default settings should suffice. However, some users may want to +tweak the prompts for fewer interruptions. To weigh the risks of +automatic execution of code blocks, here are some details about code +evaluation. + +Org evaluates code in the following circumstances: + +@table @asis +@item @emph{Source code blocks} +Org evaluates source code blocks in an Org file during export. Org +also evaluates a source code block with the @kbd{C-c C-c} key +chord. Users exporting or running code blocks must load files only +from trusted sources. Be wary of customizing variables that remove +or alter default security measures. + +@defopt org-confirm-babel-evaluate +When @code{t}, Org prompts the user for confirmation before executing +each code block. When @code{nil}, Org executes code blocks without +prompting the user for confirmation. When this option is set to +a custom function, Org invokes the function with these two +arguments: the source code language and the body of the code block. +The custom function must return either a @code{t} or @code{nil}, which +determines if the user is prompted. Each source code language can +be handled separately through this function argument. +@end defopt + +For example, here is how to execute ditaa code blocks without +prompting: + +@lisp +(defun my-org-confirm-babel-evaluate (lang body) + (not (string= lang "ditaa"))) ;don't ask for ditaa +(setq org-confirm-babel-evaluate #'my-org-confirm-babel-evaluate) +@end lisp + +@item @emph{Following @samp{shell} and @samp{elisp} links} +Org has two link types that can directly evaluate code (see +@ref{External Links}). Because such code is not visible, these links +have a potential risk. Org therefore prompts the user when it +encounters such links. The customization variables are: + +@defopt org-link-shell-confirm-function +Function that prompts the user before executing a shell link. +@end defopt + +@defopt org-link-elisp-confirm-function +Function that prompts the user before executing an Emacs Lisp link. +@end defopt + +@item @emph{Formulas in tables} +Formulas in tables (see @ref{The Spreadsheet}) are code that is evaluated +either by the Calc interpreter, or by the Emacs Lisp interpreter. +@end table + +@node Interaction +@section Interaction with Other Packages + +@cindex packages, interaction with other + +Org's compatibility and the level of interaction with other Emacs +packages are documented here. + +@menu +* Cooperation:: Packages Org cooperates with. +* Conflicts:: Packages that lead to conflicts. +@end menu + +@node Cooperation +@subsection Packages that Org cooperates with + +@table @asis +@item @samp{calc.el} by Dave Gillespie +@cindex @file{calc.el} + +Org uses the Calc package for implementing spreadsheet functionality +in its tables (see @ref{The Spreadsheet}). Org also uses Calc for +embedded calculations. See @ref{Embedded Mode,GNU Emacs Calc Manual,,calc,}. + +@item @samp{constants.el} by Carsten Dominik +@cindex @file{constants.el} +@vindex org-table-formula-constants + +Org can use names for constants in formulas in tables. Org can also +use calculation suffixes for units, such as @samp{M} for @samp{Mega}. For +a standard collection of such constants, install the @samp{constants} +package. Install version 2.0 of this package, available at +@uref{http://www.astro.uva.nl/~dominik/Tools}. Org checks if the function +@code{constants-get} has been autoloaded. Installation instructions are +in the file @samp{constants.el}. + +@item @samp{cdlatex.el} by Carsten Dominik +@cindex @file{cdlatex.el} + +Org mode can make use of the CD@LaTeX{} package to efficiently enter +@LaTeX{} fragments into Org files. See @ref{CD@LaTeX{} mode}. + +@item @samp{imenu.el} by Ake Stenhoff and Lars Lindberg +@cindex @file{imenu.el} + +Imenu creates dynamic menus based on an index of items in a file. +Org mode supports Imenu menus. Enable it with a mode hook as +follows: + +@lisp +(add-hook 'org-mode-hook + (lambda () (imenu-add-to-menubar "Imenu"))) +@end lisp + +@vindex org-imenu-depth +By default the index is two levels deep---you can modify the +depth using the option @code{org-imenu-depth}. + +@item @samp{speedbar.el} by Eric@tie{}M@.@tie{}Ludlam +@cindex @file{speedbar.el} + +Speedbar package creates a special Emacs frame for displaying files +and index items in files. Org mode supports Speedbar; users can +drill into Org files directly from the Speedbar. The @kbd{<} +in the Speedbar frame tweaks the agenda commands to that file or to +a subtree. + +@item @samp{table.el} by Takaaki Ota +@cindex table editor, @file{table.el} +@cindex @file{table.el} + +Complex ASCII tables with automatic line wrapping, column- and +row-spanning, and alignment can be created using the Emacs table +package by Takaaki Ota. Org mode recognizes such tables and exports +them properly. @kbd{C-c '} to edit these tables in a special +buffer, much like Org's code blocks. Because of interference with +other Org mode functionality, Takaaki Ota tables cannot be edited +directly in the Org buffer. + +@table @asis +@item @kbd{C-c '} (@code{org-edit-special}) +@kindex C-c ' +@findex org-edit-special +Edit a @samp{table.el} table. Works when point is in a @samp{table.el} +table. + +@item @kbd{C-c ~​} (@code{org-table-create-with-table.el}) +@kindex C-c ~ +@findex org-table-create-with-table.el +Insert a @samp{table.el} table. If there is already a table at point, +this command converts it between the @samp{table.el} format and the Org +mode format. See the documentation string of the command +@code{org-convert-table} for the restrictions under which this is +possible. +@end table +@end table + +@node Conflicts +@subsection Packages that conflict with Org mode + +@cindex shift-selection +@vindex org-support-shift-select +In Emacs, shift-selection combines motions of point with shift key to +enlarge regions. Emacs sets this mode by default. This conflicts +with Org's use of @kbd{S-} commands to change timestamps, +TODO keywords, priorities, and item bullet types, etc. Since +@kbd{S-} commands outside of specific contexts do not do +anything, Org offers the variable @code{org-support-shift-select} for +customization. Org mode accommodates shift selection by (i) making it +available outside of the special contexts where special commands +apply, and (ii) extending an existing active region even if point +moves across a special context. + +@table @asis +@item @samp{cua.el} by Kim@tie{}F@.@tie{}Storm +@cindex @file{cua.el} +@vindex org-replace-disputed-keys +Org key bindings conflict with @kbd{S-} keys used by +CUA mode. For Org to relinquish these bindings to CUA mode, +configure the variable @code{org-replace-disputed-keys}. When set, Org +moves the following key bindings in Org files, and in the agenda +buffer---but not during date selection. + +@multitable @columnfractions 0.4 0.4 +@item @kbd{S-@key{UP}} @result{} @kbd{M-p} +@tab @kbd{S-@key{DOWN}} @result{} @kbd{M-n} +@item @kbd{S-@key{LEFT}} @result{} @kbd{M--} +@tab @kbd{S-@key{RIGHT}} @result{} @kbd{M-+} +@item @kbd{C-S-@key{LEFT}} @result{} @kbd{M-S--} +@tab @kbd{C-S-@key{RIGHT}} @result{} @kbd{M-S-+} +@end multitable + +@vindex org-disputed-keys +Yes, these are unfortunately more difficult to remember. If you +want to have other replacement keys, look at the variable +@code{org-disputed-keys}. + +@item @samp{ecomplete.el} by Lars Magne Ingebrigtsen +@cindex @file{ecomplete.el} +Ecomplete provides ``electric'' address completion in address header +lines in message buffers. Sadly Orgtbl mode cuts Ecomplete's power +supply: no completion happens when Orgtbl mode is enabled in message +buffers while entering text in address header lines. If one wants +to use ecomplete one should @emph{not} follow the advice to automagically +turn on Orgtbl mode in message buffers (see @ref{Orgtbl Mode}), +but instead---after filling in the message headers---turn on Orgtbl +mode manually when needed in the messages body. + +@item @samp{filladapt.el} by Kyle Jones +@cindex @file{filladapt.el} +Org mode tries to do the right thing when filling paragraphs, list +items and other elements. Many users reported problems using both +@samp{filladapt.el} and Org mode, so a safe thing to do is to disable +filladapt like this: + +@lisp +(add-hook 'org-mode-hook 'turn-off-filladapt-mode) +@end lisp + +@item @samp{viper.el} by Michael Kifer +@cindex @file{viper.el} +@kindex C-c / + +Viper uses @kbd{C-c /} and therefore makes this key not access +the corresponding Org mode command @code{org-sparse-tree}. You need to +find another key for this command, or override the key in +@code{viper-vi-global-user-map} with + +@lisp +(define-key viper-vi-global-user-map "C-c /" 'org-sparse-tree) +@end lisp + +@item @samp{windmove.el} by Hovav Shacham +@cindex @file{windmove.el} + +This package also uses the @kbd{S-} keys, so everything +written in the paragraph above about CUA mode also applies here. If +you want to make the windmove function active in locations where Org +mode does not have special functionality on @kbd{S-}, +add this to your configuration: + +@lisp +;; Make windmove work in Org mode: +(add-hook 'org-shiftup-final-hook 'windmove-up) +(add-hook 'org-shiftleft-final-hook 'windmove-left) +(add-hook 'org-shiftdown-final-hook 'windmove-down) +(add-hook 'org-shiftright-final-hook 'windmove-right) +@end lisp + +@item @samp{yasnippet.el} +@cindex @file{yasnippet.el} +The way Org mode binds the @kbd{@key{TAB}} key (binding to @code{[tab]} +instead of @code{"\t"}) overrules YASnippet's access to this key. The +following code fixed this problem: + +@lisp +(add-hook 'org-mode-hook + (lambda () + (setq-local yas/trigger-key [tab]) + (define-key yas/keymap [tab] 'yas/next-field-or-maybe-expand))) +@end lisp + +The latest version of YASnippet does not play well with Org mode. +If the above code does not fix the conflict, start by defining +the following function: + +@lisp +(defun yas/org-very-safe-expand () + (let ((yas/fallback-behavior 'return-nil)) (yas/expand))) +@end lisp + +Then, tell Org mode to use that function: + +@lisp +(add-hook 'org-mode-hook + (lambda () + (make-variable-buffer-local 'yas/trigger-key) + (setq yas/trigger-key [tab]) + (add-to-list 'org-tab-first-hook 'yas/org-very-safe-expand) + (define-key yas/keymap [tab] 'yas/next-field))) +@end lisp +@end table + +@node TTY Keys +@section Using Org on a TTY + +@cindex tty key bindings + +Org provides alternative key bindings for TTY and modern mobile +devices that cannot perform movement commands on point and key +bindings with modifier keys. Some of these workarounds may be more +cumbersome than necessary. Users should look into customizing these +further based on their usage needs. For example, the normal +@kbd{S-} for editing timestamp might be better with +@kbd{C-c .} chord. + +@multitable @columnfractions 0.2 0.28 0.15 0.21 +@headitem Default +@tab Alternative 1 +@tab Speed key +@tab Alternative 2 +@item @kbd{S-@key{TAB}} +@tab @kbd{C-u @key{TAB}} +@tab @kbd{C} +@tab +@item @kbd{M-@key{LEFT}} +@tab @kbd{C-c C-x l} +@tab @kbd{l} +@tab @kbd{Esc @key{LEFT}} +@item @kbd{M-S-@key{LEFT}} +@tab @kbd{C-c C-x L} +@tab @kbd{L} +@tab +@item @kbd{M-@key{RIGHT}} +@tab @kbd{C-c C-x r} +@tab @kbd{r} +@tab @kbd{Esc @key{RIGHT}} +@item @kbd{M-S-@key{RIGHT}} +@tab @kbd{C-c C-x R} +@tab @kbd{R} +@tab +@item @kbd{M-@key{UP}} +@tab @kbd{C-c C-x u} +@tab +@tab @kbd{Esc @key{UP}} +@item @kbd{M-S-@key{UP}} +@tab @kbd{C-c C-x U} +@tab @kbd{U} +@tab +@item @kbd{M-@key{DOWN}} +@tab @kbd{C-c C-x d} +@tab +@tab @kbd{Esc @key{DOWN}} +@item @kbd{M-S-@key{DOWN}} +@tab @kbd{C-c C-x D} +@tab @kbd{D} +@tab +@item @kbd{S-@key{RET}} +@tab @kbd{C-c C-x c} +@tab +@tab +@item @kbd{M-@key{RET}} +@tab @kbd{C-c C-x m} +@tab +@tab @kbd{Esc @key{RET}} +@item @kbd{M-S-@key{RET}} +@tab @kbd{C-c C-x M} +@tab +@tab +@item @kbd{S-@key{LEFT}} +@tab @kbd{C-c @key{LEFT}} +@tab +@tab +@item @kbd{S-@key{RIGHT}} +@tab @kbd{C-c @key{RIGHT}} +@tab +@tab +@item @kbd{S-@key{UP}} +@tab @kbd{C-c @key{UP}} +@tab +@tab +@item @kbd{S-@key{DOWN}} +@tab @kbd{C-c @key{DOWN}} +@tab +@tab +@item @kbd{C-S-@key{LEFT}} +@tab @kbd{C-c C-x @key{LEFT}} +@tab +@tab +@item @kbd{C-S-@key{RIGHT}} +@tab @kbd{C-c C-x @key{RIGHT}} +@tab +@tab +@end multitable + +@node Protocols +@section Protocols for External Access + +@cindex protocols, for external access + +Org protocol is a tool to trigger custom actions in Emacs from +external applications. Any application that supports calling external +programs with an URL as argument may be used with this functionality. +For example, you can configure bookmarks in your web browser to send a +link to the current page to Org and create a note from it using +capture (see @ref{Capture}). You can also create a bookmark that tells +Emacs to open the local source file of a remote website you are +browsing. + +@cindex Org protocol, set-up +@cindex Installing Org protocol +In order to use Org protocol from an application, you need to register +@samp{org-protocol://} as a valid scheme-handler. External calls are +passed to Emacs through the @samp{emacsclient} command, so you also need to +ensure an Emacs server is running. More precisely, when the +application calls + +@example +emacsclient "org-protocol://PROTOCOL?key1=val1&key2=val2" +@end example + + +@noindent +Emacs calls the handler associated to @var{PROTOCOL} with +argument @samp{(:key1 val1 :key2 val2)}. + +@cindex protocol, new protocol +@cindex defining new protocols +Org protocol comes with three predefined protocols, detailed in the +following sections. Configure @code{org-protocol-protocol-alist} to define +your own. + +@menu +* The @code{store-link} protocol:: Store a link, push URL to kill-ring. +* The @code{capture} protocol:: Fill a buffer with external information. +* The @code{open-source} protocol:: Edit published contents. +@end menu + +@node The @code{store-link} protocol +@subsection The @code{store-link} protocol + +@cindex store-link protocol +@cindex protocol, store-link + +Using the @code{store-link} handler, you can copy links, to that they can +be inserted using @kbd{M-x org-insert-link} or yanking. More +precisely, the command + +@example +emacsclient "org-protocol://store-link?url=URL&title=TITLE" +@end example + + +@noindent +stores the following link: + +@example +[[URL][TITLE]] +@end example + + +In addition, @var{URL} is pushed on the kill-ring for yanking. +You need to encode @var{URL} and @var{TITLE} if they contain +slashes, and probably quote those for the shell. + +To use this feature from a browser, add a bookmark with an arbitrary +name, e.g., @samp{Org: store-link} and enter this as @emph{Location}: + +@example +javascript:location.href='org-protocol://store-link?' + + new URLSearchParams(@{url:location.href, title:document.title@}); +@end example + +Title is an optional parameter. Another expression was recommended earlier: + +@example +javascript:location.href='org-protocol://store-link?url='+ + encodeURIComponent(location.href); +@end example + +The latter form is compatible with older Org versions from 9.0 to 9.4. + +@node The @code{capture} protocol +@subsection The @code{capture} protocol + +@cindex capture protocol +@cindex protocol, capture + +Activating the ``capture'' handler pops up a @samp{Capture} buffer in Emacs, +using acapture template. + +@example +emacsclient "org-protocol://capture?template=X&url=URL&title=TITLE&body=BODY" +@end example + + +To use this feature, add a bookmark with an arbitrary name, e.g., +@samp{Org: capture}, and enter this as @samp{Location}: + +@example +javascript:location.href='org-protocol://capture?' + + new URLSearchParams(@{ + template: 'x', url: window.location.href, + title: document.title, body: window.getSelection()@}); +@end example + +You might have seen another expression: + +@example +javascript:location.href='org-protocol://capture?template=x'+ + '&url='+encodeURIComponent(window.location.href)+ + '&title='+encodeURIComponent(document.title)+ + '&body='+encodeURIComponent(window.getSelection()); +@end example + +It is a bit more cluttered than the former one, but it is compatible +with previous Org versions 9.0-9.4. In these versions encoding of +space as ``+'' character was not supported by URI decoder. + +@vindex org-protocol-default-template-key +The capture template to be used can be specified in the bookmark (like +@samp{X} above). If unspecified, the template key is set in the variable +@code{org-protocol-default-template-key}. The following template +placeholders are available: + +@example +%:link The URL +%:description The webpage title +%:annotation Equivalent to [[%:link][%:description]] +%i The selected text +@end example + +@node The @code{open-source} protocol +@subsection The @code{open-source} protocol + +@cindex open-source protocol +@cindex protocol, open-source + +The @code{open-source} handler is designed to help with editing local +sources when reading a document. To that effect, you can use +a bookmark with the following location: + +@example +javascript:location.href='org-protocol://open-source?&url='+ + encodeURIComponent(location.href) +@end example + +@vindex org-protocol-project-alist +The variable @code{org-protocol-project-alist} maps URLs to local file +names, by stripping URL parameters from the end and replacing the +@code{:base-url} with @code{:working-directory} and @code{:online-suffix} with +@code{:working-suffix}. For example, assuming you own a local copy of +@samp{https://orgmode.org/worg/} contents at @samp{/home/user/worg}, you can set +@code{org-protocol-project-alist} to the following + +@lisp +(setq org-protocol-project-alist + '(("Worg" + :base-url "https://orgmode.org/worg/" + :working-directory "/home/user/worg/" + :online-suffix ".html" + :working-suffix ".org"))) +@end lisp + +@noindent +If you are now browsing +@samp{https://orgmode.org/worg/org-contrib/org-protocol.html} and find +a typo or have an idea about how to enhance the documentation, simply +click the bookmark and start editing. + +@cindex rewritten URL in open-source protocol +@cindex protocol, open-source rewritten URL +However, such mapping may not always yield the desired results. +Suppose you maintain an online store located at @samp{https://example.com/}. +The local sources reside in @samp{/home/user/example/}. It is common +practice to serve all products in such a store through one file and +rewrite URLs that do not match an existing file on the server. That +way, a request to @samp{https://example.com/print/posters.html} might be +rewritten on the server to something like +@samp{https://example.com/shop/products.php/posters.html.php}. The +@code{open-source} handler probably cannot find a file named +@samp{/home/user/example/print/posters.html.php} and fails. + +Such an entry in @code{org-protocol-project-alist} may hold an additional +property @code{:rewrites}. This property is a list of cons cells, each of +which maps a regular expression to a path relative to the +@code{:working-directory}. + +Now map the URL to the path @samp{/home/user/example/products.php} by +adding @code{:rewrites} rules like this: + +@lisp +(setq org-protocol-project-alist + '(("example.com" + :base-url "https://example.com/" + :working-directory "/home/user/example/" + :online-suffix ".php" + :working-suffix ".php" + :rewrites (("example.com/print/" . "products.php") + ("example.com/$" . "index.php"))))) +@end lisp + +@noindent +Since @samp{example.com/$} is used as a regular expression, it maps +@samp{http://example.com/}, @samp{https://example.com}, +@samp{http://www.example.com/} and similar to +@samp{/home/user/example/index.php}. + +The @code{:rewrites} rules are searched as a last resort if and only if no +existing file name is matched. + +@cindex protocol, open-source, set-up mapping +@cindex mappings in open-source protocol +@findex org-protocol-create +@findex org-protocol-create-for-org +Two functions can help you filling @code{org-protocol-project-alist} with +valid contents: @code{org-protocol-create} and +@code{org-protocol-create-for-org}. The latter is of use if you're editing +an Org file that is part of a publishing project. + +@node Org Crypt +@section Org Crypt + +Org Crypt encrypts the text of an entry, but not the headline, or +properties. Behind the scene, it uses the @ref{Top,Emacs EasyPG Library,,epa,} to +encrypt and decrypt files, and EasyPG needs a correct @ref{Top,GnuPG,,gnupg,} setup. + +@vindex org-crypt-tag-matcher +Any text below a headline that has a @samp{crypt} tag is automatically +encrypted when the file is saved. To use a different tag, customize +the @code{org-crypt-tag-matcher} setting. + +Here is a suggestion for Org Crypt settings in Emacs init file: + +@lisp +(require 'org-crypt) +(org-crypt-use-before-save-magic) +(setq org-tags-exclude-from-inheritance '("crypt")) + +(setq org-crypt-key nil) +;; GPG key to use for encryption +;; Either the Key ID or set to nil to use symmetric encryption. + +(setq auto-save-default nil) +;; Auto-saving does not cooperate with org-crypt.el: so you need to +;; turn it off if you plan to use org-crypt.el quite often. Otherwise, +;; you'll get an (annoying) message each time you start Org. + +;; To turn it off only locally, you can insert this: +;; +;; # -*- buffer-auto-save-file-name: nil; -*- +@end lisp + +It's possible to use different keys for different headings by +specifying the respective key as property @samp{CRYPTKEY}, e.g.: + +@example +* Totally secret :crypt: + :PROPERTIES: + :CRYPTKEY: 0x0123456789012345678901234567890123456789 + :END: +@end example + +Excluding the @samp{crypt} tag from inheritance prevents already encrypted +text from being encrypted again. + +@node Org Mobile +@section Org Mobile + +@cindex smartphone + +Org Mobile is a protocol for synchronizing Org files between Emacs and +other applications, e.g., on mobile devices. It enables offline-views +and capture support for an Org mode system that is rooted on a ``real'' +computer. The external application can also record changes to +existing entries. + +This appendix describes Org's support for agenda view formats +compatible with Org Mobile. It also describes synchronizing changes, +such as to notes, between the mobile application and the computer. + +To change tags and TODO states in the mobile application, first +customize the variables @code{org-todo-keywords}, @code{org-tag-alist} and +@code{org-tag-persistent-alist}. These should cover all the important tags +and TODO keywords, even if Org files use only some of them. Though +the mobile application is expected to support in-buffer settings, it +is required to understand TODO states @emph{sets} (see @ref{Per-file keywords}) and @emph{mutually exclusive} tags (see @ref{Setting Tags}) only for those set in these variables. + +@menu +* Setting up the staging area:: For the mobile device. +* Pushing to the mobile application:: Uploading Org files and agendas. +* Pulling from the mobile application:: Integrating captured and flagged items. +@end menu + +@node Setting up the staging area +@subsection Setting up the staging area + +@vindex org-mobile-directory +The mobile application needs access to a file directory on +a server@footnote{For a server to host files, consider using a WebDAV server, +such as @uref{https://nextcloud.com, Nextcloud}. Additional help is at this @uref{https://orgmode.org/worg/org-faq.html#mobileorg_webdav, FAQ entry}.} to interact with Emacs. Pass its location through +the @code{org-mobile-directory} variable. If you can mount that directory +locally just set the variable to point to that directory: + +@lisp +(setq org-mobile-directory "~/orgmobile/") +@end lisp + +Alternatively, by using TRAMP (see @ref{Top,TRAMP User Manual,,tramp,}), +@code{org-mobile-directory} may point to a remote directory accessible +through, for example, SSH, SCP, or DAVS: + +@lisp +(setq org-mobile-directory "/davs:user@@remote.host:/org/webdav/") +@end lisp + +@vindex org-mobile-encryption +With a public server, consider encrypting the files. Org also +requires OpenSSL installed on the local computer. To turn on +encryption, set the same password in the mobile application and in +Emacs. Set the password in the variable +@code{org-mobile-use-encryption}@footnote{If Emacs is configured for safe storing of passwords, then +configure the variable @code{org-mobile-encryption-password}; please read +the docstring of that variable.}. Note that even after the mobile +application encrypts the file contents, the file name remains visible +on the file systems of the local computer, the server, and the mobile +device. + +@node Pushing to the mobile application +@subsection Pushing to the mobile application + +@findex org-mobile-push +@vindex org-mobile-files +The command @code{org-mobile-push} copies files listed in +@code{org-mobile-files} into the staging area. Files include agenda files +(as listed in @code{org-agenda-files}). Customize @code{org-mobile-files} to +add other files. File names are staged with paths relative to +@code{org-directory}, so all files should be inside this directory@footnote{Symbolic links in @code{org-directory} need to have the same name +as their targets.}. + +Push creates a special Org file @samp{agendas.org} with custom agenda views +defined by the user@footnote{While creating the agendas, Org mode forces @samp{ID} properties +on all referenced entries, so that these entries can be uniquely +identified if Org Mobile flags them for further action. To avoid +setting properties configure the variable +@code{org-mobile-force-id-on-agenda-items} to @code{nil}. Org mode then relies +on outline paths, assuming they are unique.}. + +Finally, Org writes the file @samp{index.org}, containing links to other +files. The mobile application reads this file first from the server +to determine what other files to download for agendas. For faster +downloads, it is expected to only read files whose checksums@footnote{Checksums are stored automatically in the file +@samp{checksums.dat}.} +have changed. + +@node Pulling from the mobile application +@subsection Pulling from the mobile application + +@findex org-mobile-pull +The command @code{org-mobile-pull} synchronizes changes with the server. +More specifically, it first pulls the Org files for viewing. It then +appends captured entries and pointers to flagged or changed entries to +the file @samp{mobileorg.org} on the server. Org ultimately integrates its +data in an inbox file format, through the following steps: + +@enumerate +@item +@vindex org-mobile-inbox-for-pull +Org moves all entries found in @samp{mobileorg.org}@footnote{The file will be empty after this operation.} and appends +them to the file pointed to by the variable +@code{org-mobile-inbox-for-pull}. It should reside neither in the +staging area nor on the server. Each captured entry and each +editing event is a top-level entry in the inbox file. + +@item +@cindex @samp{FLAGGED}, tag +After moving the entries, Org processes changes to the shared +files. Some of them are applied directly and without user +interaction. Examples include changes to tags, TODO state, +headline and body text. Entries requiring further action are +tagged as @samp{FLAGGED}. Org marks entries with problems with an error +message in the inbox. They have to be resolved manually. + +@item +Org generates an agenda view for flagged entries for user +intervention to clean up. For notes stored in flagged entries, Org +displays them in the echo area when point is on the corresponding +agenda item. + +@table @asis +@item @kbd{?} +Pressing @kbd{?} displays the entire flagged note in another +window. Org also pushes it to the kill ring. To store flagged +note as a normal note, use @kbd{? z C-y C-c C-c}. Pressing +@kbd{?} twice does these things: first it removes the +@samp{FLAGGED} tag; second, it removes the flagged note from the +property drawer; third, it signals that manual editing of the +flagged entry is now finished. +@end table +@end enumerate + +@kindex ? @r{(Agenda dispatcher)} +From the agenda dispatcher, @kbd{?} returns to the view to finish +processing flagged entries. Note that these entries may not be the +most recent since the mobile application searches files that were last +pulled. To get an updated agenda view with changes since the last +pull, pull again. + +@node Hacking +@appendix Hacking + +@cindex hacking + +This appendix describes some ways a user can extend the functionality +of Org. + +@menu +* Hooks:: How to reach into Org's internals. +* Add-on Packages:: Available extensions. +* Adding Hyperlink Types:: New custom link types. +* Adding Export Back-ends:: How to write new export back-ends. +* Tables in Arbitrary Syntax:: Orgtbl for LaTeX and other programs. +* Dynamic Blocks:: Automatically filled blocks. +* Special Agenda Views:: Customized views. +* Speeding Up Your Agendas:: Tips on how to speed up your agendas. +* Extracting Agenda Information:: Post-processing agenda information. +* Using the Property API:: Writing programs that use entry properties. +* Using the Mapping API:: Mapping over all or selected entries. +@end menu + +@node Hooks +@appendixsec Hooks + +@cindex hooks + +Org has a large number of hook variables for adding functionality. +This appendix illustrates using a few. A complete list of hooks with +documentation is maintained by the Worg project at +@uref{https://orgmode.org/worg/doc.html#hooks}. + +@node Add-on Packages +@appendixsec Add-on Packages + +@cindex add-on packages + +Various authors wrote a large number of add-on packages for Org. Some +of these packages used to be part of the @samp{org-mode} repository but are +now hosted in a separate @samp{org-contrib} repository +@uref{https://git.sr.ht/~bzg/org-contrib, here}. A Worg page with more +information is at: @uref{https://orgmode.org/worg/org-contrib/}. + +@node Adding Hyperlink Types +@appendixsec Adding Hyperlink Types + +@cindex hyperlinks, adding new types + +Org has many built-in hyperlink types (see @ref{Hyperlinks}), and an +interface for adding new link types. The following example shows the +process of adding Org links to Unix man pages, which look like this + +@example +[[man:printf][The printf manual]] +@end example + + +@noindent +The following @samp{ol-man.el} file implements it + +@lisp +;;; ol-man.el - Support for links to man pages in Org mode +(require 'ol) + +(org-link-set-parameters "man" + :follow #'org-man-open + :export #'org-man-export + :store #'org-man-store-link) + +(defcustom org-man-command 'man + "The Emacs command to be used to display a man page." + :group 'org-link + :type '(choice (const man) (const woman))) + +(defun org-man-open (path _) + "Visit the manpage on PATH. +PATH should be a topic that can be thrown at the man command." + (funcall org-man-command path)) + +(defun org-man-store-link () + "Store a link to a man page." + (when (memq major-mode '(Man-mode woman-mode)) + ;; This is a man page, we do make this link. + (let* ((page (org-man-get-page-name)) + (link (concat "man:" page)) + (description (format "Man page for %s" page))) + (org-link-store-props + :type "man" + :link link + :description description)))) + +(defun org-man-get-page-name () + "Extract the page name from the buffer name." + ;; This works for both `Man-mode' and `woman-mode'. + (if (string-match " \\(\\S-+\\)\\*" (buffer-name)) + (match-string 1 (buffer-name)) + (error "Cannot create link to this man page"))) + +(defun org-man-export (link description format _) + "Export a man page link from Org files." + (let ((path (format "http://man.he.net/?topic=%s§ion=all" link)) + (desc (or description link))) + (pcase format + (`html (format "%s" path desc)) + (`latex (format "\\href@{%s@}@{%s@}" path desc)) + (`texinfo (format "@@uref@{%s,%s@}" path desc)) + (`ascii (format "%s (%s)" desc path)) + (t path)))) + +(provide ol-man) +;;; ol-man.el ends here +@end lisp + +@noindent +To activate links to man pages in Org, enter this in the Emacs init +file: + +@lisp +(require 'ol-man) +@end lisp + +@noindent +A review of @samp{ol-man.el}: + +@enumerate +@item +First, @samp{(require 'ol)} ensures that @samp{ol.el} is loaded. + +@item +@findex org-link-set-parameters +@vindex org-link-parameters +Then @code{org-link-set-parameters} defines a new link type with @samp{man} +prefix and associates functions for following, exporting and +storing such links. See the variable @code{org-link-parameters} for +a complete list of possible associations. + +@item +The rest of the file implements necessary variables and functions. + +For example, @code{org-man-store-link} is responsible for storing a link +when @code{org-store-link} (see @ref{Handling Links}) is called from a buffer +displaying a man page. It first checks if the major mode is +appropriate. If check fails, the function returns @code{nil}, which +means it isn't responsible for creating a link to the current +buffer. Otherwise the function makes a link string by combining +the @samp{man:} prefix with the man topic. It also provides a default +description. The function @code{org-insert-link} can insert it back +into an Org buffer later on. +@end enumerate + +@node Adding Export Back-ends +@appendixsec Adding Export Back-ends + +@cindex Export, writing back-ends + +Org's export engine makes it easy for writing new back-ends. The +framework on which the engine was built makes it easy to derive new +back-ends from existing ones. + +@findex org-export-define-backend +@findex org-export-define-derived-backend +The two main entry points to the export engine are: +@code{org-export-define-backend} and @code{org-export-define-derived-backend}. +To grok these functions, see @samp{ox-latex.el} for an example of defining +a new back-end from scratch, and @samp{ox-beamer.el} for an example of +deriving from an existing engine. + +For creating a new back-end from scratch, first set its name as +a symbol in an alist consisting of elements and export functions. To +make the back-end visible to the export dispatcher, set @code{:menu-entry} +keyword. For export options specific to this back-end, set the +@code{:options-alist}. + +For creating a new back-end from an existing one, set +@code{:translate-alist} to an alist of export functions. This alist +replaces the parent back-end functions. + +For complete documentation, see @uref{https://orgmode.org/worg/dev/org-export-reference.html, the Org Export Reference on Worg}. + +@node Tables in Arbitrary Syntax +@appendixsec Tables in Arbitrary Syntax + +@cindex tables, in other modes +@cindex lists, in other modes +@cindex Orgtbl mode + +Due to Org's success in handling tables with Orgtbl, a frequently +requested feature is the use of Org's table functions in other modes, +e.g., @LaTeX{}. This would be hard to do in a general way without +complicated customization nightmares. Moreover, that would take Org +away from its simplicity roots that Orgtbl has proven. There is, +however, an alternate approach to accomplishing the same. + +This approach involves implementing a custom @emph{translate} function that +operates on a native Org @emph{source table} to produce a table in another +format. This strategy would keep the excellently working Orgtbl +simple and isolate complications, if any, confined to the translate +function. To add more alien table formats, we just add more translate +functions. Also the burden of developing custom translate functions +for new table formats is in the hands of those who know those formats +best. + +@menu +* Radio tables:: Sending and receiving radio tables. +* A @LaTeX{} example:: Step by step, almost a tutorial. +* Translator functions:: Copy and modify. +@end menu + +@node Radio tables +@appendixsubsec Radio tables + +@cindex radio tables + +Radio tables are target locations for translated tables that are not near +their source. Org finds the target location and inserts the translated +table. + +The key to finding the target location is the magic words @samp{BEGIN/END +RECEIVE ORGTBL}. They have to appear as comments in the current mode. +If the mode is C, then: + +@example +/* BEGIN RECEIVE ORGTBL table_name */ +/* END RECEIVE ORGTBL table_name */ +@end example + +At the location of source, Org needs a special line to direct Orgtbl +to translate and to find the target for inserting the translated +table. For example: + +@cindex @samp{ORGTBL}, keyword +@example +#+ORGTBL: SEND table_name translation_function arguments ... +@end example + + +@noindent +@samp{table_name} is the table's reference name, which is also used in the +receiver lines, and the @samp{translation_function} is the Lisp function +that translates. This line, in addition, may also contain alternating +key and value arguments at the end. The translation function gets +these values as a property list. A few standard parameters are +already recognized and acted upon before the translation function is +called: + +@table @asis +@item @samp{:skip N} +Skip the first N lines of the table. Hlines do count; include them +if they are to be skipped. + +@item @samp{:skipcols (n1 n2 ...)} +List of columns to be skipped. First Org automatically discards +columns with calculation marks and then sends the table to the +translator function, which then skips columns as specified in +@samp{skipcols}. +@end table + +To keep the source table intact in the buffer without being disturbed +when the source file is compiled or otherwise being worked on, use one +of these strategies: + +@itemize +@item +Place the table in a block comment. For example, in C mode you +could wrap the table between @samp{/*} and @samp{*/} lines. + +@item +Put the table after an ``end'' statement. For example @code{\bye} in @TeX{} +and @code{\end@{document@}} in @LaTeX{}. + +@item +Comment and un-comment each line of the table during edits. The +@kbd{M-x orgtbl-toggle-comment} command makes toggling easy. +@end itemize + +@node A @LaTeX{} example +@appendixsubsec A @LaTeX{} example of radio tables + +@cindex @LaTeX{}, and Orgtbl mode + +To wrap a source table in @LaTeX{}, use the @samp{comment} environment +provided by @samp{comment.sty}@footnote{@uref{https://www.ctan.org/pkg/comment}}. To activate it, put +@code{\usepackage@{comment@}} in the document header. Orgtbl mode inserts +a radio table skeleton@footnote{By default this works only for @LaTeX{}, HTML, and Texinfo. +Configure the variable @code{orgtbl-radio-table-templates} to install +templates for other modes.} with the command @kbd{M-x orgtbl-insert-radio-table}, which prompts for a table name. For +example, if @samp{salesfigures} is the name, the template inserts: + +@example +% BEGIN RECEIVE ORGTBL salesfigures +% END RECEIVE ORGTBL salesfigures +\begin@{comment@} +#+ORGTBL: SEND salesfigures orgtbl-to-latex +| | | +\end@{comment@} +@end example + +@vindex LaTeX-verbatim-environments +@noindent +The line @samp{#+ORGTBL: SEND} tells Orgtbl mode to use the function +@code{orgtbl-to-latex} to convert the table to @LaTeX{} format, then insert +the table at the target (receive) location named @samp{salesfigures}. Now +the table is ready for data entry. It can even use spreadsheet +features@footnote{If the @samp{TBLFM} keyword contains an odd number of dollar +characters, this may cause problems with Font Lock in @LaTeX{} mode. As +shown in the example you can fix this by adding an extra line inside +the @samp{comment} environment that is used to balance the dollar +expressions. If you are using AUC@TeX{} with the font-latex library, +a much better solution is to add the @samp{comment} environment to the +variable @code{LaTeX-verbatim-environments}.}: + +@example +% BEGIN RECEIVE ORGTBL salesfigures +% END RECEIVE ORGTBL salesfigures +\begin@{comment@} +#+ORGTBL: SEND salesfigures orgtbl-to-latex +| Month | Days | Nr sold | per day | +|-------+------+---------+---------| +| Jan | 23 | 55 | 2.4 | +| Feb | 21 | 16 | 0.8 | +| March | 22 | 278 | 12.6 | +#+TBLFM: $4=$3/$2;%.1f +% $ (optional extra dollar to keep Font Lock happy, see footnote) +\end@{comment@} +@end example + +After editing, @kbd{C-c C-c} inserts the translated table at the +target location, between the two marker lines. + +For hand-made custom tables, note that the translator needs to skip +the first two lines of the source table. Also the command has to +@emph{splice} out the target table without the header and footer. + +@example +\begin@{tabular@}@{lrrr@} +Month & \multicolumn@{1@}@{c@}@{Days@} & Nr.\ sold & per day\\ +% BEGIN RECEIVE ORGTBL salesfigures +% END RECEIVE ORGTBL salesfigures +\end@{tabular@} +% +\begin@{comment@} +#+ORGTBL: SEND salesfigures orgtbl-to-latex :splice t :skip 2 +| Month | Days | Nr sold | per day | +|-------+------+---------+---------| +| Jan | 23 | 55 | 2.4 | +| Feb | 21 | 16 | 0.8 | +| March | 22 | 278 | 12.6 | +#+TBLFM: $4=$3/$2;%.1f +\end@{comment@} +@end example + +The @LaTeX{} translator function @code{orgtbl-to-latex} is already part of +Orgtbl mode and uses a @samp{tabular} environment to typeset the table and +marks horizontal lines with @code{\hline}. For additional parameters to +control output, see @ref{Translator functions}: + +@table @asis +@item @samp{:splice BOOLEAN} +When @{@{@{var(BOOLEAN@}@}@} is non-@code{nil}, return only table body lines; +i.e., not wrapped in @samp{tabular} environment. Default is @code{nil}. + +@item @samp{:fmt FMT} +Format string to warp each field. It should contain @samp{%s} for the +original field value. For example, to wrap each field value in +dollar symbol, you could use @samp{:fmt "$%s$"}. Format can also wrap +a property list with column numbers and formats, for example @samp{:fmt + (2 "$%s$" 4 "%s\\%%")}. In place of a string, a function of one +argument can be used; the function must return a formatted string. + +@item @samp{:efmt EFMT} +Format numbers as exponentials. The spec should have @samp{%s} twice for +inserting mantissa and exponent, for example @samp{"%s\\times10^@{%s@}"}. This +may also be a property list with column numbers and formats, for +example @samp{:efmt (2 "$%s\\times10^@{%s@}$" 4 "$%s\\cdot10^@{%s@}$")}. After +@var{EFMT} has been applied to a value, @var{FMT}---see +above---is also applied. Functions with two arguments can be +supplied instead of strings. By default, no special formatting is +applied. +@end table + +@node Translator functions +@appendixsubsec Translator functions + +@cindex HTML, and Orgtbl mode +@cindex translator function + +@findex orgtbl-to-csv +@findex orgtbl-to-tsv +@findex orgtbl-to-latex +@findex orgtbl-to-html +@findex orgtbl-to-texinfo +@findex orgtbl-to-unicode +@findex orgtbl-to-orgtbl +@findex orgtbl-to-generic +Orgtbl mode has built-in translator functions: @code{orgtbl-to-csv} +(comma-separated values), @code{orgtbl-to-tsv} (TAB-separated values), +@code{orgtbl-to-latex}, @code{orgtbl-to-html}, @code{orgtbl-to-texinfo}, +@code{orgtbl-to-unicode} and @code{orgtbl-to-orgtbl}. They use the generic +translator, @code{orgtbl-to-generic}, which delegates translations to +various export back-ends. + +Properties passed to the function through the @samp{ORGTBL SEND} line take +precedence over properties defined inside the function. For example, +this overrides the default @LaTeX{} line endings, @code{\\}, with @code{\\[2mm]}: + +@example +#+ORGTBL: SEND test orgtbl-to-latex :lend " \\\\[2mm]" +@end example + + +For a new language translator, define a converter function. It can be +a generic function, such as shown in this example. It marks +a beginning and ending of a table with @samp{!BTBL!} and @samp{!ETBL!}; +a beginning and ending of lines with @samp{!BL!} and @samp{!EL!}; and uses a TAB +for a field separator: + +@lisp +(defun orgtbl-to-language (table params) + "Convert the orgtbl-mode TABLE to language." + (orgtbl-to-generic + table + (org-combine-plists + '(:tstart "!BTBL!" :tend "!ETBL!" :lstart "!BL!" :lend "!EL!" :sep "\t") + params))) +@end lisp + +@noindent +The documentation for the @code{orgtbl-to-generic} function shows +a complete list of parameters, each of which can be passed through to +@code{orgtbl-to-latex}, @code{orgtbl-to-texinfo}, and any other function using +that generic function. + +For complicated translations the generic translator function could be +replaced by a custom translator function. Such a custom function must +take two arguments and return a single string containing the formatted +table. The first argument is the table whose lines are a list of +fields or the symbol @code{hline}. The second argument is the property +list consisting of parameters specified in the @samp{#+ORGTBL: SEND} line. +Please share your translator functions by posting them to the Org +users mailing list, at @email{emacs-orgmode@@gnu.org}. + +@node Dynamic Blocks +@appendixsec Dynamic Blocks + +@cindex dynamic blocks + +Org supports @emph{dynamic blocks} in Org documents. They are inserted +with begin and end markers like any other code block, but the contents +are updated automatically by a user function. + +@kindex C-c C-x x +@findex org-dynamic-block-insert-dblock +You can insert a dynamic block with @code{org-dynamic-block-insert-dblock}, +which is bound to @kbd{C-c C-x x} by default. For example, +@kbd{C-c C-x x c l o c k t a b l e @key{RET}} inserts a table that +updates the work time (see @ref{Clocking Work Time}). + +Dynamic blocks can have names and function parameters. The syntax is +similar to source code block specifications: + +@example +#+BEGIN: myblock :parameter1 value1 :parameter2 value2 ... + ... +#+END: +@end example + +These commands update dynamic blocks: + +@table @asis +@item @kbd{C-c C-x C-u} (@code{org-dblock-update}) +@kindex C-c C-x C-u +@findex org-dblock-update +Update dynamic block at point. + +@item @kbd{C-u C-c C-x C-u} +@kindex C-u C-c C-x C-u +Update all dynamic blocks in the current file. +@end table + +Before updating a dynamic block, Org removes content between the +@samp{BEGIN} and @samp{END} markers. Org then reads the parameters on the +@samp{BEGIN} line for passing to the writer function as a plist. The +previous content of the dynamic block becomes erased from the buffer +and appended to the plist under @code{:content}. + +The syntax for naming a writer function with a dynamic block labeled +@samp{myblock} is: @code{org-dblock-write:myblock}. + +The following is an example of a dynamic block and a block writer function +that updates the time when the function was last run: + +@example +#+BEGIN: block-update-time :format "on %m/%d/%Y at %H:%M" + ... +#+END: +@end example + +@noindent +The dynamic block's writer function: + +@lisp +(defun org-dblock-write:block-update-time (params) + (let ((fmt (or (plist-get params :format) "%d. %m. %Y"))) + (insert "Last block update at: " + (format-time-string fmt)))) +@end lisp + +To keep dynamic blocks up-to-date in an Org file, use the function, +@code{org-update-all-dblocks} in hook, such as @code{before-save-hook}. The +@code{org-update-all-dblocks} function does not run if the file is not in +Org mode. + +@findex org-narrow-to-block +Dynamic blocks, like any other block, can be narrowed with +@code{org-narrow-to-block}. + +@node Special Agenda Views +@appendixsec Special Agenda Views + +@cindex agenda views, user-defined + +@vindex org-agenda-skip-function +@vindex org-agenda-skip-function-global +Org provides a special hook to further limit items in agenda views: +@code{agenda}, @code{agenda*}@footnote{The @code{agenda*} view is the same as @code{agenda} except that it +only considers @emph{appointments}, i.e., scheduled and deadline items that +have a time specification @samp{[h]h:mm} in their time-stamps.}, @code{todo}, @code{alltodo}, @code{tags}, @code{tags-todo}, +@code{tags-tree}. Specify a custom function that tests inclusion of every +matched item in the view. This function can also skip as much as is +needed. + +For a global condition applicable to agenda views, use the +@code{org-agenda-skip-function-global} variable. Org uses a global +condition with @code{org-agenda-skip-function} for custom searching. + +This example defines a function for a custom view showing TODO items +with @samp{waiting} status. Manually this is a multi-step search process, +but with a custom view, this can be automated as follows: + +The custom function searches the subtree for the @samp{waiting} tag and +returns @code{nil} on match. Otherwise it gives the location from where +the search continues. + +@lisp +(defun my-skip-unless-waiting () + "Skip trees that are not waiting" + (let ((subtree-end (save-excursion (org-end-of-subtree t)))) + (if (re-search-forward ":waiting:" subtree-end t) + nil ; tag found, do not skip + subtree-end))) ; tag not found, continue after end of subtree +@end lisp + +To use this custom function in a custom agenda command: + +@lisp +(org-add-agenda-custom-command + '("b" todo "PROJECT" + ((org-agenda-skip-function 'my-skip-unless-waiting) + (org-agenda-overriding-header "Projects waiting for something: ")))) +@end lisp + +@vindex org-agenda-overriding-header +Note that this also binds @code{org-agenda-overriding-header} to a more +meaningful string suitable for the agenda view. + +@vindex org-odd-levels-only +@vindex org-agenda-skip-function +Search for entries with a limit set on levels for the custom search. +This is a general approach to creating custom searches in Org. To +include all levels, use @samp{LEVEL>0}@footnote{Note that, for @code{org-odd-levels-only}, a level number +corresponds to order in the hierarchy, not to the number of stars.}. Then to selectively pick +the matched entries, use @code{org-agenda-skip-function}, which also +accepts Lisp forms, such as @code{org-agenda-skip-entry-if} and +@code{org-agenda-skip-subtree-if}. For example: + +@table @asis +@item @samp{(org-agenda-skip-entry-if 'scheduled)} +Skip current entry if it has been scheduled. + +@item @samp{(org-agenda-skip-entry-if 'notscheduled)} +Skip current entry if it has not been scheduled. + +@item @samp{(org-agenda-skip-entry-if 'deadline)} +Skip current entry if it has a deadline. + +@item @samp{(org-agenda-skip-entry-if 'scheduled 'deadline)} +Skip current entry if it has a deadline, or if it is scheduled. + +@item @samp{(org-agenda-skip-entry-if 'todo '("TODO" "WAITING"))} +Skip current entry if the TODO keyword is TODO or WAITING@. + +@item @samp{(org-agenda-skip-entry-if 'todo 'done)} +Skip current entry if the TODO keyword marks a DONE state. + +@item @samp{(org-agenda-skip-entry-if 'timestamp)} +Skip current entry if it has any timestamp, may also be deadline or +scheduled. + +@item @samp{(org-agenda-skip-entry-if 'regexp "regular expression")} +Skip current entry if the regular expression matches in the entry. + +@item @samp{(org-agenda-skip-entry-if 'notregexp "regular expression")} +Skip current entry unless the regular expression matches. + +@item @samp{(org-agenda-skip-subtree-if 'regexp "regular expression")} +Same as above, but check and skip the entire subtree. +@end table + +The following is an example of a search for @samp{waiting} without the +special function: + +@lisp +(org-add-agenda-custom-command + '("b" todo "PROJECT" + ((org-agenda-skip-function '(org-agenda-skip-subtree-if + 'regexp ":waiting:")) + (org-agenda-overriding-header "Projects waiting for something: ")))) +@end lisp + +@node Speeding Up Your Agendas +@appendixsec Speeding Up Your Agendas + +@cindex agenda views, optimization + +Some agenda commands slow down when the Org files grow in size or +number. Here are tips to speed up: + +@itemize +@item +Reduce the number of Org agenda files to avoid slowdowns due to hard drive +accesses. + +@item +Reduce the number of DONE and archived headlines so agenda +operations that skip over these can finish faster. + +@item +Do not dim blocked tasks: +@vindex org-agenda-dim-blocked-tasks + +@lisp +(setq org-agenda-dim-blocked-tasks nil) +@end lisp + +@item +Stop preparing agenda buffers on startup: +@vindex org-startup-folded +@vindex org-agenda-inhibit-startup + +@lisp +(setq org-agenda-inhibit-startup t) +@end lisp + +@item +Disable tag inheritance for agendas: +@vindex org-agenda-show-inherited-tags +@vindex org-agenda-use-tag-inheritance + +@lisp +(setq org-agenda-use-tag-inheritance nil) +@end lisp +@end itemize + +These options can be applied to selected agenda views. For more +details about generation of agenda views, see the docstrings for the +relevant variables, and this @uref{https://orgmode.org/worg/agenda-optimization.html, dedicated Worg page} for agenda +optimization. + +@node Extracting Agenda Information +@appendixsec Extracting Agenda Information + +@cindex agenda, pipe +@cindex scripts, for agenda processing + +Org provides commands to access agendas through Emacs batch mode. +Through this command-line interface, agendas are automated for further +processing or printing. + +@vindex org-agenda-custom-commands +@findex org-batch-agenda +@code{org-batch-agenda} creates an agenda view in ASCII and outputs to +standard output. This command takes one string parameter. When +string consists of a single character, Org uses it as a key to +@code{org-agenda-custom-commands}. These are the same ones available +through the agenda dispatcher (see @ref{Agenda Dispatcher}). + +This example command line directly prints the TODO list to the printer: + +@example +emacs -batch -l ~/.emacs -eval '(org-batch-agenda "t")' | lpr +@end example + + +When the string parameter length is two or more characters, Org +matches it with tags/TODO strings. For example, this example command +line prints items tagged with @samp{shop}, but excludes items tagged with +@samp{NewYork}: + +@example +emacs -batch -l ~/.emacs \ + -eval '(org-batch-agenda "+shop-NewYork")' | lpr +@end example + +@noindent +An example showing on-the-fly parameter modifications: + +@example +emacs -batch -l ~/.emacs \ + -eval '(org-batch-agenda "a" \ + org-agenda-span (quote month) \ + org-agenda-include-diary nil \ + org-agenda-files (quote ("~/org/project.org")))' \ + | lpr +@end example + +@noindent +which produces an agenda for the next 30 days from just the +@samp{~/org/projects.org} file. + +@findex org-batch-agenda-csv +For structured processing of agenda output, use @code{org-batch-agenda-csv} +with the following fields: + +@table @asis +@item category +The category of the item +@item head +The headline, without TODO keyword, TAGS and PRIORITY +@item type +The type of the agenda entry, can be + +@multitable {aaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @code{todo} +@tab selected in TODO match +@item @code{tagsmatch} +@tab selected in tags match +@item @code{diary} +@tab imported from diary +@item @code{deadline} +@tab a deadline +@item @code{scheduled} +@tab scheduled +@item @code{timestamp} +@tab appointment, selected by timestamp +@item @code{closed} +@tab entry was closed on date +@item @code{upcoming-deadline} +@tab warning about nearing deadline +@item @code{past-scheduled} +@tab forwarded scheduled item +@item @code{block} +@tab entry has date block including date +@end multitable + +@item todo +The TODO keyword, if any +@item tags +All tags including inherited ones, separated by colons +@item date +The relevant date, like @samp{2007-2-14} +@item time +The time, like @samp{15:00-16:50} +@item extra +String with extra planning info +@item priority-l +The priority letter if any was given +@item priority-n +The computed numerical priority +@end table + +If the selection of the agenda item was based on a timestamp, +including those items with @samp{DEADLINE} and @samp{SCHEDULED} keywords, then +Org includes date and time in the output. + +If the selection of the agenda item was based on a timestamp (or +deadline/scheduled), then Org includes date and time in the output. + +Here is an example of a post-processing script in Perl. It takes the +CSV output from Emacs and prints with a checkbox: + +@example +#!/usr/bin/perl + +# define the Emacs command to run +$cmd = "emacs -batch -l ~/.emacs -eval '(org-batch-agenda-csv \"t\")'"; + +# run it and capture the output +$agenda = qx@{$cmd 2>/dev/null@}; + +# loop over all lines +foreach $line (split(/\n/,$agenda)) @{ + # get the individual values + ($category,$head,$type,$todo,$tags,$date,$time,$extra, + $priority_l,$priority_n) = split(/,/,$line); + # process and print + print "[ ] $head\n"; +@} +@end example + +@node Using the Property API +@appendixsec Using the Property API + +@cindex API, for properties +@cindex properties, API + +Here is a description of the functions that can be used to work with +properties. + +@defun org-entry-properties &optional pom which +Get all properties of the entry at point-or-marker @var{POM}. +This includes the TODO keyword, the tags, time strings for deadline, +scheduled, and clocking, and any additional properties defined in the +entry. The return value is an alist. Keys may occur multiple times +if the property key was used several times. @var{POM} may also +be @code{nil}, in which case the current entry is used. If +@var{WHICH} is @code{nil} or @code{all}, get all properties. If +@var{WHICH} is @code{special} or @code{standard}, only get that subclass. +@end defun + +@vindex org-use-property-inheritance +@findex org-insert-property-drawer +@defun org-entry-get pom property &optional inherit +Get value of @var{PROPERTY} for entry at point-or-marker +@var{POM}. By default, this only looks at properties defined +locally in the entry. If @var{INHERIT} is non-@code{nil} and the +entry does not have the property, then also check higher levels of the +hierarchy. If @var{INHERIT} is the symbol @code{selective}, use +inheritance if and only if the setting of +@code{org-use-property-inheritance} selects @var{PROPERTY} for +inheritance. +@end defun + +@defun org-entry-delete pom property +Delete the property @var{PROPERTY} from entry at point-or-marker +@var{POM}. +@end defun + +@defun org-entry-put pom property value +Set @var{PROPERTY} to @var{VALUES} for entry at +point-or-marker POM@. +@end defun + +@defun org-buffer-property-keys &optional include-specials +Get all property keys in the current buffer. +@end defun + +@defun org-insert-property-drawer +Insert a property drawer for the current entry. Also +@end defun + +@defun org-entry-put-multivalued-property pom property &rest values +Set @var{PROPERTY} at point-or-marker @var{POM} to +@var{VALUES}. @var{VALUES} should be a list of strings. +They are concatenated, with spaces as separators. +@end defun + +@defun org-entry-get-multivalued-property pom property +Treat the value of the property @var{PROPERTY} as +a whitespace-separated list of values and return the values as a list +of strings. +@end defun + +@defun org-entry-add-to-multivalued-property pom property value +Treat the value of the property @var{PROPERTY} as +a whitespace-separated list of values and make sure that +@var{VALUE} is in this list. +@end defun + +@defun org-entry-remove-from-multivalued-property pom property value +Treat the value of the property @var{PROPERTY} as +a whitespace-separated list of values and make sure that +@var{VALUE} is @emph{not} in this list. +@end defun + +@defun org-entry-member-in-multivalued-property pom property value +Treat the value of the property @var{PROPERTY} as +a whitespace-separated list of values and check if @var{VALUE} is +in this list. +@end defun + +@defopt org-property-allowed-value-functions +Hook for functions supplying allowed values for a specific property. +The functions must take a single argument, the name of the property, +and return a flat list of allowed values. If @samp{:ETC} is one of the +values, use the values as completion help, but allow also other values +to be entered. The functions must return @code{nil} if they are not +responsible for this property. +@end defopt + +@node Using the Mapping API +@appendixsec Using the Mapping API + +@cindex API, for mapping +@cindex mapping entries, API + +Org has sophisticated mapping capabilities to find all entries +satisfying certain criteria. Internally, this functionality is used +to produce agenda views, but there is also an API that can be used to +execute arbitrary functions for each or selected entries. The main +entry point for this API is: + +@defun org-map-entries func &optional match scope &rest skip +Call @var{FUNC} at each headline selected by @var{MATCH} in +@var{SCOPE}. + +@var{FUNC} is a function or a Lisp form. With point positioned +at the beginning of the headline, call the function without arguments. +Org returns an alist of return values of calls to the function. + +To avoid preserving point, Org wraps the call to @var{FUNC} in +@code{save-excursion} form. After evaluation, Org moves point to the end +of the line that was just processed. Search continues from that point +forward. This may not always work as expected under some conditions, +such as if the current sub-tree was removed by a previous archiving +operation. In such rare circumstances, Org skips the next entry +entirely when it should not. To stop Org from such skips, make +@var{FUNC} set the variable @code{org-map-continue-from} to a specific +buffer position. + +@var{MATCH} is a tags/property/TODO match. Org iterates only +matched headlines. Org iterates over all headlines when +@var{MATCH} is @code{nil} or @code{t}. + +@var{SCOPE} determines the scope of this command. It can be any +of: + +@table @asis +@item @code{nil} +The current buffer, respecting the restriction, if any. + +@item @code{tree} +The subtree started with the entry at point. + +@item @code{region} +The entries within the active region, if any. + +@item @code{file} +The current buffer, without restriction. + +@item @code{file-with-archives} +The current buffer, and any archives associated with it. + +@item @code{agenda} +All agenda files. + +@item @code{agenda-with-archives} +All agenda files with any archive files associated with them. + +@item list of filenames +If this is a list, all files in the list are scanned. +@end table + +@noindent +The remaining arguments are treated as settings for the scanner's +skipping facilities. Valid arguments are: + +@table @asis +@item @code{archive} +Skip trees with the @samp{ARCHIVE} tag. + +@item @code{comment} +Skip trees with the COMMENT keyword. + +@item function or Lisp form +@vindex org-agenda-skip-function +Used as value for @code{org-agenda-skip-function}, so whenever the +function returns @code{t}, @var{FUNC} is called for that entry and +search continues from the point where the function leaves it. +@end table +@end defun + +The mapping routine can call any arbitrary function, even functions +that change meta data or query the property API (see @ref{Using the Property API}). Here are some handy functions: + +@defun org-todo &optional arg +Change the TODO state of the entry. See the docstring of the +functions for the many possible values for the argument +@var{ARG}. +@end defun + +@defun org-priority &optional action +Change the priority of the entry. See the docstring of this function +for the possible values for @var{ACTION}. +@end defun + +@defun org-toggle-tag tag &optional onoff +Toggle the tag @var{TAG} in the current entry. Setting +@var{ONOFF} to either @code{on} or @code{off} does not toggle tag, but +ensure that it is either on or off. +@end defun + +@defun org-promote +Promote the current entry. +@end defun + +@defun org-demote +Demote the current entry. +@end defun + +This example turns all entries tagged with @samp{TOMORROW} into TODO +entries with keyword @samp{UPCOMING}. Org ignores entries in comment trees +and archive trees. + +@lisp +(org-map-entries '(org-todo "UPCOMING") + "+TOMORROW" 'file 'archive 'comment) +@end lisp + +The following example counts the number of entries with TODO keyword +@samp{WAITING}, in all agenda files. + +@lisp +(length (org-map-entries t "/+WAITING" 'agenda)) +@end lisp + +@node History and Acknowledgments +@appendix History and Acknowledgments + + + +@anchor{From Carsten} +@appendixsec From Carsten + +Org was born in 2003, out of frustration over the user interface of +the Emacs Outline mode. I was trying to organize my notes and +projects, and using Emacs seemed to be the natural way to go. +However, having to remember eleven different commands with two or +three keys per command, only to hide and show parts of the outline +tree, that seemed entirely unacceptable to me. Also, when using +outlines to take notes, I constantly wanted to restructure the tree, +organizing it parallel to my thoughts and plans. @emph{Visibility cycling} +and @emph{structure editing} were originally implemented in the package +@samp{outline-magic.el}, but quickly moved to the more general @samp{org.el}. +As this environment became comfortable for project planning, the next +step was adding @emph{TODO entries}, basic @emph{timestamps}, and @emph{table +support}. These areas highlighted the two main goals that Org still +has today: to be a new, outline-based, plain text mode with innovative +and intuitive editing features, and to incorporate project planning +functionality directly into a notes file. + +Since the first release, literally thousands of emails to me or to the +@email{emacs-orgmode@@gnu.org, mailing list} have provided a constant stream of bug reports, feedback, +new ideas, and sometimes patches and add-on code. Many thanks to +everyone who has helped to improve this package. I am trying to keep +here a list of the people who had significant influence in shaping one +or more aspects of Org. The list may not be complete, if I have +forgotten someone, please accept my apologies and let me know. + +Before I get to this list, a few special mentions are in order: + +@table @asis +@item Bastien Guerry +Bastien has written a large number of extensions to Org (most of +them integrated into the core by now), including the @LaTeX{} exporter +and the plain list parser. His support during the early days was +central to the success of this project. Bastien also invented Worg, +helped establishing the Web presence of Org, and sponsored hosting +costs for the orgmode.org website. Bastien stepped in as maintainer +of Org between 2011 and 2013, at a time when I desperately needed +a break. + +@item Eric Schulte and Dan Davison +Eric and Dan are jointly responsible for the Org Babel system, which +turns Org into a multi-language environment for evaluating code and +doing literate programming and reproducible research. This has +become one of Org's killer features that define what Org is today. + +@item John Wiegley +John has contributed a number of great ideas and patches directly to +Org, including the attachment system (@samp{org-attach.el}), integration +with Apple Mail (@samp{org-mac-message.el}), hierarchical dependencies of +TODO items, habit tracking (@samp{org-habits.el}), and encryption +(@samp{org-crypt.el}). Also, the capture system is really an extended +copy of his great @samp{remember.el}. + +@item Sebastian Rose +Without Sebastian, the HTML/XHTML publishing of Org would be the +pitiful work of an ignorant amateur. Sebastian has pushed this part +of Org onto a much higher level. He also wrote @samp{org-info.js}, +a JavaScript program for displaying webpages derived from Org using +an Info-like or a folding interface with single-key navigation. +@end table + +See below for the full list of contributions! Again, please let me +know what I am missing here! + +@anchor{From Bastien} +@appendixsec From Bastien + +I (Bastien) have been maintaining Org between 2011 and 2013. This +appendix would not be complete without adding a few more +acknowledgments and thanks. + +I am first grateful to Carsten for his trust while handing me over the +maintainership of Org. His unremitting support is what really helped +me getting more confident over time, with both the community and the +code. + +When I took over maintainership, I knew I would have to make Org more +collaborative than ever, as I would have to rely on people that are +more knowledgeable than I am on many parts of the code. Here is +a list of the persons I could rely on, they should really be +considered co-maintainers, either of the code or the community: + +@table @asis +@item Eric Schulte +Eric is maintaining the Babel parts of Org. His reactivity here +kept me away from worrying about possible bugs here and let me focus +on other parts. + +@item Nicolas Goaziou +Nicolas is maintaining the consistency of the deepest parts of Org. +His work on @samp{org-element.el} and @samp{ox.el} has been outstanding, and +it opened the doors for many new ideas and features. He rewrote +many of the old exporters to use the new export engine, and helped +with documenting this major change. More importantly (if that's +possible), he has been more than reliable during all the work done +for Org 8.0, and always very reactive on the mailing list. + +@item Achim Gratz +Achim rewrote the building process of Org, turning some @emph{ad hoc} +tools into a flexible and conceptually clean process. He patiently +coped with the many hiccups that such a change can create for users. + +@item Nick Dokos +The Org mode mailing list would not be such a nice place without +Nick, who patiently helped users so many times. It is impossible to +overestimate such a great help, and the list would not be so active +without him. +@end table + +I received support from so many users that it is clearly impossible to +be fair when shortlisting a few of them, but Org's history would not +be complete if the ones above were not mentioned in this manual. + +@anchor{List of Contributions} +@appendixsec List of Contributions + +@itemize +@item +Russell Adams came up with the idea for drawers. + +@item +Thomas Baumann wrote @samp{ol-bbdb.el} and @samp{ol-mhe.el}. + +@item +Christophe Bataillon created the great unicorn logo that we use on +the Org mode website. + +@item +Alex Bochannek provided a patch for rounding timestamps. + +@item +Jan Böcker wrote @samp{ol-docview.el}. + +@item +Brad Bozarth showed how to pull RSS feed data into Org files. + +@item +Tom Breton wrote @samp{org-choose.el}. + +@item +Charles Cave's suggestion sparked the implementation of templates +for Remember, which are now templates for capture. + +@item +Timothy E Chapman worked on a complete overhaul of the orgmode.org +website in 2020 and helped fixing various bugs. + +@item +Pavel Chalmoviansky influenced the agenda treatment of items with +specified time. + +@item +Gregory Chernov patched support for Lisp forms into table +calculations and improved XEmacs compatibility, in particular by +porting @samp{nouline.el} to XEmacs. + +@item +Sacha Chua suggested copying some linking code from Planner. + +@item +Baoqiu Cui contributed the DocBook exporter. + +@item +Eddward DeVilla proposed and tested checkbox statistics. He also +came up with the idea of properties, and that there should be an API +for them. + +@item +Nick Dokos tracked down several nasty bugs. + +@item +Kees Dullemond used to edit projects lists directly in HTML and so +inspired some of the early development, including HTML export. He +also asked for a way to narrow wide table columns. + +@item +Thomas@tie{}S@.@tie{}Dye contributed documentation on Worg and helped +integrating the Org Babel documentation into the manual. + +@item +Christian Egli converted the documentation into Texinfo format, +inspired the agenda, patched CSS formatting into the HTML exporter, +and wrote @samp{org-taskjuggler.el}. + +@item +David Emery provided a patch for custom CSS support in exported HTML +agendas. + +@item +Nic Ferrier contributed mailcap and XOXO support. + +@item +Miguel@tie{}A@.@tie{}Figueroa-Villanueva implemented hierarchical checkboxes. + +@item +John Foerch figured out how to make incremental search show context +around a match in a hidden outline tree. + +@item +Raimar Finken wrote @samp{org-git-line.el}. + +@item +Mikael Fornius works as a mailing list moderator. + +@item +Austin Frank works as a mailing list moderator. + +@item +Eric Fraga drove the development of Beamer export with ideas and +testing. + +@item +Barry Gidden did proofreading the manual in preparation for the book +publication through Network Theory Ltd. + +@item +Niels Giesen had the idea to automatically archive DONE trees. + +@item +Nicolas Goaziou rewrote much of the plain list code. + +@item +Kai Grossjohann pointed out key-binding conflicts with other +packages. + +@item +Brian Gough of Network Theory Ltd publishes the Org mode manual as +a book. + +@item +Bernt Hansen has driven much of the support for auto-repeating +tasks, task state change logging, and the clocktable. His clear +explanations have been critical when we started to adopt the Git +version control system. + +@item +Manuel Hermenegildo has contributed various ideas, small fixes and +patches. + +@item +Phil Jackson wrote @samp{ol-irc.el}. + +@item +Scott Jaderholm proposed footnotes, control over whitespace between +folded entries, and column view for properties. + +@item +Matt Jones wrote MobileOrg Android. + +@item +Tokuya Kameshima wrote @samp{org-wl.el} and @samp{org-mew.el}. + +@item +Shidai Liu (``Leo'') asked for embedded @LaTeX{} and tested it. He also +provided frequent feedback and some patches. + +@item +Matt Lundin has proposed last-row references for table formulas and +named invisible anchors. He has also worked a lot on the FAQ@. + +@item +David Maus wrote @samp{org-atom.el}, maintains the issues file for Org, +and is a prolific contributor on the mailing list with competent +replies, small fixes and patches. + +@item +Jason@tie{}F@.@tie{}McBrayer suggested agenda export to CSV format. + +@item +Kyle Meyer helped setting up the @uref{https://public-inbox.org/, public-inbox} archive of the @uref{https://orgmode.org/list/, Org +mailing list} and has been fixing many bugs. + +@item +Max Mikhanosha came up with the idea of refiling. + +@item +Dmitri Minaev sent a patch to set priority limits on a per-file +basis. + +@item +Stefan Monnier provided a patch to keep the Emacs Lisp compiler +happy. + +@item +Richard Moreland wrote MobileOrg for the iPhone. + +@item +Rick Moynihan proposed allowing multiple TODO sequences in a file +and being able to quickly restrict the agenda to a subtree. + +@item +Todd Neal provided patches for links to Info files and Elisp forms. + +@item +Greg Newman refreshed the unicorn logo into its current form. + +@item +Tim O'Callaghan suggested in-file links, search options for general +file links, and tags. + +@item +Osamu Okano wrote @samp{orgcard2ref.pl}, a Perl program to create a text +version of the reference card. + +@item +Takeshi Okano translated the manual and David O'Toole's tutorial +into Japanese. + +@item +Oliver Oppitz suggested multi-state TODO items. + +@item +Scott Otterson sparked the introduction of descriptive text for +links, among other things. + +@item +Pete Phillips helped during the development of the TAGS feature, +and provided frequent feedback. + +@item +Martin Pohlack provided the code snippet to bundle character +insertion into bundles of 20 for undo. + +@item +Ihor Radchenko helped with fixing bugs and improving the user +experience regarding Org's speed. + +@item +T@.@tie{}V@.@tie{}Raman reported bugs and suggested improvements. + +@item +Matthias Rempe (Oelde) provided ideas, Windows support, and quality +control. + +@item +Paul Rivier provided the basic implementation of named footnotes. +He also acted as mailing list moderator for some time. + +@item +Kevin Rogers contributed code to access VM files on remote hosts. + +@item +Frank Ruell solved the mystery of the @samp{keymapp nil} bug, a conflict +with @samp{allout.el}. + +@item +Jason Riedy generalized the send-receive mechanism for Orgtbl +tables with extensive patches. + +@item +Philip Rooke created the Org reference card, provided lots of +feedback, developed and applied standards to the Org documentation. + +@item +Christian Schlauer proposed angular brackets around links, among +other things. + +@item +Paul Sexton wrote @samp{org-ctags.el}. + +@item +Tom Shannon's @samp{organizer-mode.el} inspired linking to VM/BBDB/Gnus. + +@item +Ilya Shlyakhter proposed the Archive Sibling, line numbering in +literal examples, and remote highlighting for referenced code lines. + +@item +Stathis Sideris wrote the @samp{ditaa.jar} ASCII to PNG converter that is +now packaged into the @uref{https://git.sr.ht/~bzg/org-contrib, org-contrib} repository. + +@item +Daniel Sinder came up with the idea of internal archiving by locking +subtrees. + +@item +Dale Smith proposed link abbreviations. + +@item +James TD Smith has contributed a large number of patches for +useful tweaks and features. + +@item +Adam Spiers asked for global linking commands, inspired the link +extension system, added support for Mairix, and proposed the mapping +API@. + +@item +Ulf Stegemann created the table to translate special symbols to +HTML, @LaTeX{}, UTF-8, Latin-1 and ASCII@. + +@item +Andy Stewart contributed code to @samp{ol-w3m.el}, to copy +HTML content with links transformation to Org syntax. + +@item +David O'Toole wrote @samp{org-publish.el} and drafted the +manual chapter about publishing. + +@item +Jambunathan@tie{}K@.@tie{}contributed the ODT exporter. + +@item +Sebastien Vauban reported many issues with @LaTeX{} and Beamer export +and enabled source code highlighting in Gnus. + +@item +Stefan Vollmar organized a video-recorded talk at the +Max-Planck-Institute for Neurology. He also inspired the creation +of a concept index for HTML export. + +@item +Jürgen Vollmer contributed code generating the table of contents in +HTML output. + +@item +Samuel Wales has provided important feedback and bug reports. + +@item +Chris Wallace provided a patch implementing the @samp{QUOTE} block. + +@item +David Wainberg suggested archiving, and improvements to the +linking system. + +@item +Carsten Wimmer suggested some changes and helped fix a bug in +linking to Gnus. + +@item +Roland Winkler requested additional key bindings to make Org work on +a TTY@. + +@item +Piotr Zielinski wrote @samp{org-mouse.el}, proposed agenda +blocks and contributed various ideas and code snippets. + +@item +Marco Wahl wrote @samp{ol-eww.el}. +@end itemize + +@node GNU Free Documentation License +@appendix GNU Free Documentation License + +@center Version 1.3, 3 November 2008 + +@display +Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. +@uref{https://fsf.org/} + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. +@end display + +@enumerate 0 +@item +PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document @dfn{free} +in the sense of freedom: to assure everyone the effective freedom +to copy and redistribute it, with or without modifying it, either +commercially or noncommercially. Secondarily, this License +preserves for the author and publisher a way to get credit for +their work, while not being considered responsible for +modifications made by others. + +This License is a kind of ``copyleft'', which means that derivative +works of the document must themselves be free in the same sense. +It complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for +free software, because free software needs free documentation: +a free program should come with manuals providing the same freedoms +that the software does. But this License is not limited to +software manuals; it can be used for any textual work, regardless +of subject matter or whether it is published as a printed book. We +recommend this License principally for works whose purpose is +instruction or reference. + +@item +APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, +that contains a notice placed by the copyright holder saying it can +be distributed under the terms of this License. Such a notice +grants a world-wide, royalty-free license, unlimited in duration, +to use that work under the conditions stated herein. The +``Document'', below, refers to any such manual or work. Any member +of the public is a licensee, and is addressed as ``you''. You accept +the license if you copy, modify or distribute the work in a way +requiring permission under copyright law. + +A ``Modified Version'' of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A ``Secondary Section'' is a named appendix or a front-matter section +of the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall +subject (or to related matters) and contains nothing that could +fall directly within that overall subject. (Thus, if the Document +is in part a textbook of mathematics, a Secondary Section may not +explain any mathematics.) The relationship could be a matter of +historical connection with the subject or with related matters, or +of legal, commercial, philosophical, ethical or political position +regarding them. + +The ``Invariant Sections'' are certain Secondary Sections whose +titles are designated, as being those of Invariant Sections, in the +notice that says that the Document is released under this License. +If a section does not fit the above definition of Secondary then it +is not allowed to be designated as Invariant. The Document may +contain zero Invariant Sections. If the Document does not identify +any Invariant Sections then there are none. + +The ``Cover Texts'' are certain short passages of text that are +listed, as Front-Cover Texts or Back-Cover Texts, in the notice +that says that the Document is released under this License. +A Front-Cover Text may be at most 5 words, and a Back-Cover Text +may be at most 25 words. + +A ``Transparent'' copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed +of pixels) generic paint programs or (for drawings) some widely +available drawing editor, and that is suitable for input to text +formatters or for automatic translation to a variety of formats +suitable for input to text formatters. A copy made in an otherwise +Transparent file format whose markup, or absence of markup, has +been arranged to thwart or discourage subsequent modification by +readers is not Transparent. An image format is not Transparent if +used for any substantial amount of text. A copy that is not +``Transparent'' is called ``Opaque''. + +Examples of suitable formats for Transparent copies include plain +ASCII without markup, Texinfo input format, @LaTeX{} input format, +SGML or XML using a publicly available DTD, and standard-conforming +simple HTML, PostScript or PDF designed for human modification. +Examples of transparent image formats include PNG, XCF and JPG@. +Opaque formats include proprietary formats that can be read and +edited only by proprietary word processors, SGML or XML for which +the DTD and/or processing tools are not generally available, and +the machine-generated HTML, PostScript or PDF produced by some word +processors for output purposes only. + +The ``Title Page'' means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the +material this License requires to appear in the title page. For +works in formats which do not have any title page as such, ``Title +Page'' means the text near the most prominent appearance of the +work's title, preceding the beginning of the body of the text. + +The ``publisher'' means any person or entity that distributes copies +of the Document to the public. + +A section ``Entitled XYZ'' means a named subunit of the Document +whose title either is precisely XYZ or contains XYZ in parentheses +following text that translates XYZ in another language. (Here XYZ +stands for a specific section name mentioned below, such as +``Acknowledgements'', ``Dedications'', ``Endorsements'', or ``History''.) +To ``Preserve the Title'' of such a section when you modify the +Document means that it remains a section ``Entitled XYZ'' according +to this definition. + +The Document may include Warranty Disclaimers next to the notice +which states that this License applies to the Document. These +Warranty Disclaimers are considered to be included by reference in +this License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and +has no effect on the meaning of this License. + +@item +VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License +applies to the Document are reproduced in all copies, and that you +add no other conditions whatsoever to those of this License. You +may not use technical measures to obstruct or control the reading +or further copying of the copies you make or distribute. However, +you may accept compensation in exchange for copies. If you +distribute a large enough number of copies you must also follow the +conditions in section 3. + +You may also lend copies, under the same conditions stated above, +and you may publicly display copies. + +@item +COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly +have printed covers) of the Document, numbering more than 100, and +the Document's license notice requires Cover Texts, you must +enclose the copies in covers that carry, clearly and legibly, all +these Cover Texts: Front-Cover Texts on the front cover, and +Back-Cover Texts on the back cover. Both covers must also clearly +and legibly identify you as the publisher of these copies. The +front cover must present the full title with all words of the title +equally prominent and visible. You may add other material on the +covers in addition. Copying with changes limited to the covers, as +long as they preserve the title of the Document and satisfy these +conditions, can be treated as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto +adjacent pages. + +If you publish or distribute Opaque copies of the Document +numbering more than 100, you must either include a machine-readable +Transparent copy along with each Opaque copy, or state in or with +each Opaque copy a computer-network location from which the general +network-using public has access to download using public-standard +network protocols a complete Transparent copy of the Document, free +of added material. If you use the latter option, you must take +reasonably prudent steps, when you begin distribution of Opaque +copies in quantity, to ensure that this Transparent copy will +remain thus accessible at the stated location until at least one +year after the last time you distribute an Opaque copy (directly or +through your agents or retailers) of that edition to the public. + +It is requested, but not required, that you contact the authors of +the Document well before redistributing any large number of copies, +to give them a chance to provide you with an updated version of the +Document. + +@item +MODIFICATIONS + +You may copy and distribute a Modified Version of the Document +under the conditions of sections 2 and 3 above, provided that you +release the Modified Version under precisely this License, with the +Modified Version filling the role of the Document, thus licensing +distribution and modification of the Modified Version to whoever +possesses a copy of it. In addition, you must do these things in +the Modified Version: + +@enumerate A +@item +Use in the Title Page (and on the covers, if any) a title +distinct from that of the Document, and from those of previous +versions (which should, if there were any, be listed in the +History section of the Document). You may use the same title as +a previous version if the original publisher of that version +gives permission. + +@item +List on the Title Page, as authors, one or more persons or +entities responsible for authorship of the modifications in the +Modified Version, together with at least five of the principal +authors of the Document (all of its principal authors, if it has +fewer than five), unless they release you from this requirement. + +@item +State on the Title page the name of the publisher of the +Modified Version, as the publisher. + +@item +Preserve all the copyright notices of the Document. + +@item +Add an appropriate copyright notice for your modifications +adjacent to the other copyright notices. + +@item +Include, immediately after the copyright notices, a license +notice giving the public permission to use the Modified Version +under the terms of this License, in the form shown in the +Addendum below. + +@item +Preserve in that license notice the full lists of Invariant +Sections and required Cover Texts given in the Document's +license notice. + +@item +Include an unaltered copy of this License. + +@item +Preserve the section Entitled ``History'', Preserve its Title, and +add to it an item stating at least the title, year, new authors, +and publisher of the Modified Version as given on the Title +Page. If there is no section Entitled ``History'' in the Document, +create one stating the title, year, authors, and publisher of +the Document as given on its Title Page, then add an item +describing the Modified Version as stated in the previous +sentence. + +@item +Preserve the network location, if any, given in the Document +for public access to a Transparent copy of the Document, and +likewise the network locations given in the Document for +previous versions it was based on. These may be placed in the +``History'' section. You may omit a network location for a work +that was published at least four years before the Document +itself, or if the original publisher of the version it refers +to gives permission. + +@item +For any section Entitled ``Acknowledgements'' or ``Dedications'', +Preserve the Title of the section, and preserve in the section +all the substance and tone of each of the contributor +acknowledgements and/or dedications given therein. + +@item +Preserve all the Invariant Sections of the Document, unaltered +in their text and in their titles. Section numbers or the +equivalent are not considered part of the section titles. + +@item +Delete any section Entitled ``Endorsements''. Such a section may +not be included in the Modified Version. + +@item +Do not retitle any existing section to be Entitled +``Endorsements'' or to conflict in title with any Invariant +Section. + +@item +Preserve any Warranty Disclaimers. +@end enumerate + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled ``Endorsements'', provided it contains +nothing but endorsements of your Modified Version by various +parties---for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + +@item +COMBINING DOCUMENTS + +You may combine the Document with other documents released under +this License, under the terms defined in section 4 above for +modified versions, provided that you include in the combination all +of the Invariant Sections of all of the original documents, +unmodified, and list them all as Invariant Sections of your +combined work in its license notice, and that you preserve all +their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name +but different contents, make the title of each such section unique +by adding at the end of it, in parentheses, the name of the +original author or publisher of that section if known, or else +a unique number. Make the same adjustment to the section titles in +the list of Invariant Sections in the license notice of the +combined work. + +In the combination, you must combine any sections Entitled +``History'' in the various original documents, forming one section +Entitled ``History''; likewise combine any sections Entitled +``Acknowledgements'', and any sections Entitled ``Dedications''. You +must delete all sections Entitled ``Endorsements.'' + +@item +COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other +documents released under this License, and replace the individual +copies of this License in the various documents with a single copy +that is included in the collection, provided that you follow the +rules of this License for verbatim copying of each of the documents +in all other respects. + +You may extract a single document from such a collection, and +distribute it individually under this License, provided you insert +a copy of this License into the extracted document, and follow this +License in all other respects regarding verbatim copying of that +document. + +@item +AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other +separate and independent documents or works, in or on a volume of +a storage or distribution medium, is called an ``aggregate'' if the +copyright resulting from the compilation is not used to limit the +legal rights of the compilation's users beyond what the individual +works permit. When the Document is included in an aggregate, this +License does not apply to the other works in the aggregate which +are not themselves derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half +of the entire aggregate, the Document's Cover Texts may be placed +on covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic +form. Otherwise they must appear on printed covers that bracket +the whole aggregate. + +@item +TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of +section 4. Replacing Invariant Sections with translations requires +special permission from their copyright holders, but you may +include translations of some or all Invariant Sections in addition +to the original versions of these Invariant Sections. You may +include a translation of this License, and all the license notices +in the Document, and any Warranty Disclaimers, provided that you +also include the original English version of this License and the +original versions of those notices and disclaimers. In case of +a disagreement between the translation and the original version of +this License or a notice or disclaimer, the original version will +prevail. + +If a section in the Document is Entitled ``Acknowledgements'', +``Dedications'', or ``History'', the requirement (section 4) to +Preserve its Title (section 1) will typically require changing the +actual title. + +@item +TERMINATION + +You may not copy, modify, sublicense, or distribute the Document +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense, or distribute it is void, +and will automatically terminate your rights under this License. + +However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the +copyright holder fails to notify you of the violation by some +reasonable means prior to 60 days after the cessation. + +Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from +that copyright holder, and you cure the violation prior to 30 days +after your receipt of the notice. + +Termination of your rights under this section does not terminate +the licenses of parties who have received copies or rights from you +under this License. If your rights have been terminated and not +permanently reinstated, receipt of a copy of some or all of the +same material does not give you any rights to use it. + +@item +FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions of +the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +@uref{https://www.gnu.org/copyleft/}. + +Each version of the License is given a distinguishing version +number. If the Document specifies that a particular numbered +version of this License ``or any later version'' applies to it, you +have the option of following the terms and conditions either of +that specified version or of any later version that has been +published (not as a draft) by the Free Software Foundation. If +the Document does not specify a version number of this License, +you may choose any version ever published (not as a draft) by the +Free Software Foundation. If the Document specifies that a proxy +can decide which future versions of this License can be used, that +proxy's public statement of acceptance of a version permanently +authorizes you to choose that version for the Document. + +@item +RELICENSING + +``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any +World Wide Web server that publishes copyrightable works and also +provides prominent facilities for anybody to edit those works. +A public wiki that anybody can edit is an example of such +a server. A ``Massive Multiauthor Collaboration'' (or ``MMC'') +contained in the site means any set of copyrightable works thus +published on the MMC site. + +``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0 +license published by Creative Commons Corporation, +a not-for-profit corporation with a principal place of business in +San Francisco, California, as well as future copyleft versions of +that license published by that same organization. + +``Incorporate'' means to publish or republish a Document, in whole +or in part, as part of another Document. + +An MMC is ``eligible for relicensing'' if it is licensed under this +License, and if all works that were first published under this +License somewhere other than this MMC, and subsequently +incorporated in whole or in part into the MMC, (1) had no cover +texts or invariant sections, and (2) were thus incorporated prior +to November 1, 2008. + +The operator of an MMC Site may republish an MMC contained in the +site under CC-BY-SA on the same site at any time before August 1, +2009, provided the MMC is eligible for relicensing. +@end enumerate + +@page + +@anchor{ADDENDUM How to use this License for your documents} +@appendixsec ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + +@example +Copyright (C) YEAR YOUR NAME. +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 +or any later version published by the Free Software Foundation; +with no Invariant Sections, no Front-Cover Texts, and no Back-Cover +Texts. A copy of the license is included in the section entitled ``GNU +Free Documentation License''. +@end example + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the ``with@dots{}Texts.''@tie{}line with this: + +@example +with the Invariant Sections being LIST THEIR TITLES, with +the Front-Cover Texts being LIST, and with the Back-Cover Texts +being LIST. +@end example + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, to +permit their use in free software. + +@node Main Index +@chapter Main Index + +@printindex cp + +@node Key Index +@chapter Key Index + +@printindex ky + +@node Command and Function Index +@chapter Command and Function Index + +@printindex fn + +@node Variable Index +@chapter Variable Index + +This is not a complete index of variables and faces, only the ones +that are mentioned in the manual. For a more complete list, use +@kbd{M-x org-customize} and then click yourself through the tree. + +@printindex vr + +@bye \ No newline at end of file diff --git a/elpa/org-9.5.2/doc/orgcard.tex b/elpa/org-9.5.2/doc/orgcard.tex new file mode 100644 index 0000000..a4400e7 --- /dev/null +++ b/elpa/org-9.5.2/doc/orgcard.tex @@ -0,0 +1,691 @@ +% Reference Card for Org Mode +\input org-version.tex + +%**start of header +\newcount\columnsperpage +\newcount\letterpaper + +% This file can be printed with 1, 2, or 3 columns per page (see below). +% Specify how many you want here. +\columnsperpage=3 + +% PDF output layout. 0 for A4, 1 for letter (US), a `l' is added for +% a landscape layout. +\input pdflayout.sty +\pdflayout=(0l) + +% Nothing else needs to be changed below this line. +% Copyright (C) 1987, 1993, 1996--1997, 2001--2021 Free Software +% Foundation, Inc. + +% This document is free software: you can redistribute it and/or modify +% it under the terms of the GNU General Public License as published by +% the Free Software Foundation, either version 3 of the License, or +% (at your option) any later version. + +% As a special additional permission, you may distribute reference cards +% printed, or formatted for printing, with the notice "Released under +% the terms of the GNU General Public License version 3 or later" +% instead of the usual distributed-under-the-GNU-GPL notice, and without +% a copy of the GPL itself. + +% This document is distributed in the hope that it will be useful, +% but WITHOUT ANY WARRANTY; without even the implied warranty of +% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +% GNU General Public License for more details. + +% You should have received a copy of the GNU General Public License +% along with GNU Emacs. If not, see . + +% This file is intended to be processed by plain TeX (TeX82). +% +% The final reference card has six columns, three on each side. +% This file can be used to produce it in any of three ways: +% 1 column per page +% produces six separate pages, each of which needs to be reduced to 80%. +% This gives the best resolution. +% 2 columns per page +% produces three already-reduced pages. +% You will still need to cut and paste. +% 3 columns per page +% produces two pages which must be printed sideways to make a +% ready-to-use 8.5 x 11 inch reference card. +% For this you need a dvi device driver that can print sideways. +% Which mode to use is controlled by setting \columnsperpage above. +% +% To compile and print this document: +% tex refcard.tex +% dvips -t landscape refcard.dvi +% +% Author: +% Stephen Gildea +% +% Thanks to Paul Rubin, Bob Chassell, Len Tower, and Richard Mlynarik +% for their many good ideas. + +\def\shortcopyrightnotice{\vskip 1ex plus 2 fill + \centerline{\small \copyright\ \year\ Free Software Foundation, Inc. + Permissions on back. v\orgversionnumber}} + +\def\copyrightnotice{ +\vskip 1ex plus 100 fill\begingroup\small +\centerline{Copyright \copyright\ \year\ Free Software Foundation, Inc.} +\centerline{v\orgversionnumber{} for Org-Mode \orgversionnumber{}, \versionyear} +\centerline{Author: Philip Rooke} +\centerline{based on refcard design and format by Stephen Gildea} + +\centerline{Released under the terms of the GNU General Public License} +\centerline{version 3 or later.} + +\endgroup} + +% make \bye not \outer so that the \def\bye in the \else clause below +% can be scanned without complaint. +\def\bye{\par\vfill\supereject\end} + +\newdimen\intercolumnskip %horizontal space between columns +\newbox\columna %boxes to hold columns already built +\newbox\columnb + +\def\ncolumns{\the\columnsperpage} + +\message{[\ncolumns\space + column\if 1\ncolumns\else s\fi\space per page]} + +\def\scaledmag#1{ scaled \magstep #1} + +% This multi-way format was designed by Stephen Gildea October 1986. +% Note that the 1-column format is fontfamily-independent. +\if 1\ncolumns %one-column format uses normal size + \hsize 4in + \vsize 10in + \voffset -.7in + \font\titlefont=\fontname\tenbf \scaledmag3 + \font\headingfont=\fontname\tenbf \scaledmag2 + \font\smallfont=\fontname\sevenrm + \font\smallsy=\fontname\sevensy + + \footline{\hss\folio} + \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}} +\else %2 or 3 columns uses prereduced size + \if 1\the\letterpaper + \hsize 3.2in + \vsize 7.95in + \hoffset -.75in + \voffset -.745in + \else + \hsize 3.2in + \vsize 7.65in + \hoffset -.25in + \voffset -.745in + \fi + \font\titlefont=cmbx10 \scaledmag2 + \font\headingfont=cmbx10 \scaledmag1 + \font\smallfont=cmr6 + \font\smallsy=cmsy6 + \font\eightrm=cmr8 + \font\eightbf=cmbx8 + \font\eightit=cmti8 + \font\eighttt=cmtt8 + \font\eightmi=cmmi8 + \font\eightsy=cmsy8 + \textfont0=\eightrm + \textfont1=\eightmi + \textfont2=\eightsy + \def\rm{\eightrm} + \def\bf{\eightbf} + \def\it{\eightit} + \def\tt{\eighttt} + \if 1\the\letterpaper + \normalbaselineskip=.8\normalbaselineskip + \else + \normalbaselineskip=.7\normalbaselineskip + \fi + \normallineskip=.8\normallineskip + \normallineskiplimit=.8\normallineskiplimit + \normalbaselines\rm %make definitions take effect + + \if 2\ncolumns + \let\maxcolumn=b + \footline{\hss\rm\folio\hss} + \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}} + \else \if 3\ncolumns + \let\maxcolumn=c + \nopagenumbers + \else + \errhelp{You must set \columnsperpage equal to 1, 2, or 3.} + \errmessage{Illegal number of columns per page} + \fi\fi + + \intercolumnskip=.46in + \def\abc{a} + \output={% %see The TeXbook page 257 + % This next line is useful when designing the layout. + %\immediate\write16{Column \folio\abc\space starts with \firstmark} + \if \maxcolumn\abc \multicolumnformat \global\def\abc{a} + \else\if a\abc + \global\setbox\columna\columnbox \global\def\abc{b} + %% in case we never use \columnb (two-column mode) + \global\setbox\columnb\hbox to -\intercolumnskip{} + \else + \global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi} + \def\multicolumnformat{\shipout\vbox{\makeheadline + \hbox{\box\columna\hskip\intercolumnskip + \box\columnb\hskip\intercolumnskip\columnbox} + \makefootline}\advancepageno} + \def\columnbox{\leftline{\pagebody}} + + \def\bye{\par\vfill\supereject + \if a\abc \else\null\vfill\eject\fi + \if a\abc \else\null\vfill\eject\fi + \end} +\fi + +% we won't be using math mode much, so redefine some of the characters +% we might want to talk about +%\catcode`\^=12 +\catcode`\_=12 + +% we also need the tilde, for file names. +\catcode`\~=12 + +\chardef\\=`\\ +\chardef\{=`\{ +\chardef\}=`\} + +\hyphenation{mini-buf-fer} + +\parindent 0pt +\parskip 1ex plus .5ex minus .5ex + +\def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip} + +% newcolumn - force a new column. Use sparingly, probably only for +% the first column of a page, which should have a title anyway. +\outer\def\newcolumn{\vfill\eject} + +% title - page title. Argument is title text. +\outer\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex} + +% section - new major section. Argument is section name. +\outer\def\section#1{\par\filbreak + \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}% + \vskip 2ex plus 1ex minus 1.5ex} + +\newdimen\keyindent + +% beginindentedkeys...endindentedkeys - key definitions will be +% indented, but running text, typically used as headings to group +% definitions, will not. +\def\beginindentedkeys{\keyindent=1em} +\def\endindentedkeys{\keyindent=0em} +\endindentedkeys + +% paralign - begin paragraph containing an alignment. +% If an \halign is entered while in vertical mode, a parskip is never +% inserted. Using \paralign instead of \halign solves this problem. +\def\paralign{\vskip\parskip\halign} + +% \<...> - surrounds a variable name in a code example +\def\<#1>{{\it #1\/}} + +% kbd - argument is characters typed literally. Like the Texinfo command. +\def\kbd#1{{\tt#1}\null} %\null so not an abbrev even if period follows + +% beginexample...endexample - surrounds literal text, such a code example. +% typeset in a typewriter font with line breaks preserved +\def\beginexample{\par\leavevmode\begingroup + \obeylines\obeyspaces\parskip0pt\tt} +{\obeyspaces\global\let =\ } +\def\endexample{\endgroup} + +% key - definition of a key. +% \key{description of key}{key-name} +% prints the description left-justified, and the key-name in a \kbd +% form near the right margin. +\def\key#1#2{\leavevmode\hbox to \hsize{\vtop + {\hsize=.75\hsize\rightskip=1em + \hskip\keyindent\relax#1}\kbd{#2}\hfil}} + +\newbox\metaxbox +\setbox\metaxbox\hbox{\kbd{M-x }} +\newdimen\metaxwidth +\metaxwidth=\wd\metaxbox + +% metax - definition of a M-x command. +% \metax{description of command}{M-x command-name} +% Tries to justify the beginning of the command name at the same place +% as \key starts the key name. (The "M-x " sticks out to the left.) +\def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize + {\hskip\keyindent\relax#1\hfil}% + \hskip -\metaxwidth minus 1fil + \kbd{#2}\hfil}} + +% threecol - like "key" but with two key names. +% for example, one for doing the action backward, and one for forward. +\def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\hfil\quad + &\kbd{#3}\hfil\quad\cr} + +%\def\noteone{{\small \hfill [1]}} +%\def\notetwo{{\small \hfill [2]}} +\def\noteone{{\small [1]}} +\def\notetwo{{\small [2]}} + + +%**end of header + + +\title{Org-Mode Reference Card (1/2)} + +\centerline{(for version \orgversionnumber)} + +\section{Getting Started} +\metax{To read the on-line documentation try}{M-x org-info} + +\section{Visibility Cycling} + +\key{rotate current subtree between states}{TAB} +\key{rotate entire buffer between states}{S-TAB} +\key{restore property-dependent startup visibility}{C-u C-u TAB} +\metax{show the whole file, including drawers}{C-u C-u C-u TAB} +\key{reveal context around point}{C-c C-r} +\metax{toggle indented view}{M-x org-indent-mode} + +\section{Motion} + +\key{next/previous heading}{C-c C-n/p} +\key{next/previous heading, same level}{C-c C-f/b} +\key{backward to higher level heading}{C-c C-u} +\key{jump to another place in document}{C-c C-j} +\key{previous/next plain list item}{S-UP/DOWN\notetwo} + +\section{Structure Editing} + +\key{insert new heading/item at current level}{M-RET} +\key{insert new heading after subtree}{C-RET} +\key{insert new TODO entry/checkbox item}{M-S-RET} +\key{insert TODO entry/ckbx after subtree}{C-S-RET} +\key{turn (head)line into item, cycle item type}{C-c -} +\key{turn item/line into headline}{C-c *} +\key{promote/demote heading}{M-LEFT/RIGHT} +\metax{promote/demote current subtree}{M-S-LEFT/RIGHT} +\metax{move subtree/list item up/down}{M-UP/DOWN} +\metax{move the line at point up/down}{M-S-UP/DOWN} +\metax{sort subtree/region/plain-list}{C-c \^{}} +\metax{clone a subtree}{C-c C-x c} +\metax{copy visible parts of the region}{C-c C-x v} +\metax{kill/copy subtree}{C-c C-x C-w/M-w} +\metax{yank subtree}{C-c C-x C-y or C-y} +\metax{narrow buffer to subtree / widen}{C-x n s/w} + +\section{Capture - Refile - Archiving} +\key{capture a new item (C-u C-u = goto last)}{C-c c \noteone} +\key{refile subtree (C-u C-u = goto last)}{C-c C-w} +\key{archive subtree using the default command}{C-c C-x C-a} +\key{move subtree to archive file}{C-c C-x C-s} +\key{toggle ARCHIVE tag / to ARCHIVE sibling}{C-c C-x a/A} +\key{force cycling of an ARCHIVEd tree}{C-TAB} + +\section{Filtering and Sparse Trees} + +\key{construct a sparse tree by various criteria}{C-c /} +\key{view TODO's in sparse tree}{C-c / t/T} +\key{global TODO list in agenda mode}{C-c a t \noteone} + +\section{Tables} + +{\bf Creating a table} + +%\metax{insert a new Org-mode table}{M-x org-table-create} +\metax{just start typing, e.g.}{|Name|Phone|Age RET |- TAB} +\key{convert region to table}{C-c |} +\key{... separator at least 3 spaces}{C-3 C-c |} + +{\bf Commands available inside tables} + +The following commands work when the cursor is {\it inside a table}. +Outside of tables, the same keys may have other functionality. + +{\bf Re-aligning and field motion} + +\key{re-align the table without moving the cursor}{C-c C-c} +\key{re-align the table, move to next field}{TAB} +\key{move to previous field}{S-TAB} +\key{re-align the table, move to next row}{RET} +\key{move to beginning/end of field}{M-a/e} + +{\bf Row and column editing} + +\key{move the current column left}{M-LEFT/RIGHT} +\key{kill the current column}{M-S-LEFT} +\key{insert new column to left of cursor position}{M-S-RIGHT} + +\key{move the current row up/down}{M-UP/DOWN} +\key{kill the current row or horizontal line}{M-S-UP} +\key{insert new row above the current row}{M-S-DOWN} +\key{insert hline below (\kbd{C-u} : above) current row}{C-c -} +\key{insert hline and move to line below it}{C-c RET} +\key{sort lines in region}{C-c \^{}} + +{\bf Regions} + +\metax{cut/copy/paste rectangular region}{C-c C-x C-w/M-w/C-y} +%\key{copy rectangular region}{C-c C-x M-w} +%\key{paste rectangular region}{C-c C-x C-y} + +{\bf Miscellaneous} + +\key{to limit column width to \kbd{N} characters, use}{...| |...} +\key{edit the current field in a separate window}{C-c `} +\key{make current field fully visible}{C-u TAB} +\metax{export as tab-separated file}{M-x org-table-export} +\metax{import tab-separated file}{M-x org-table-import} +\key{sum numbers in current column/rectangle}{C-c +} + +{\bf Tables created with the \kbd{table.el} package} + +\key{insert a new \kbd{table.el} table}{C-c ~} +\key{recognize existing table.el table}{C-c C-c} +\key{convert table (Org-mode $\leftrightarrow$ table.el)}{C-c ~} + +{\bf Spreadsheet} + +Formulas typed in field are executed by \kbd{TAB}, +\kbd{RET} and \kbd{C-c C-c}. \kbd{=} introduces a column +formula, \kbd{:=} a field formula. + +\key{Example: Add Col1 and Col2}{|=\$1+\$2 |} +\key{... with printf format specification}{|=\$1+\$2;\%.2f|} +\key{... with constants from constants.el}{|=\$1/\$c/\$cm |} +\metax{sum from 2nd to 3rd hline}{|:=vsum(@II..@III)|} +\key{apply current column formula}{| = |} + +\key{set and eval column formula}{C-c =} +\key{set and eval field formula}{C-u C-c =} +\key{re-apply all stored equations to current line}{C-c *} +\key{re-apply all stored equations to entire table}{C-u C-c *} +\key{iterate table to stability}{C-u C-u C-c *} +\key{rotate calculation mark through \# * ! \^ \_ \$}{C-\#} +\key{show line, column, formula reference}{C-c ?} +\key{toggle grid / debugger}{C-c \}/\{} + +\newcolumn +{\it Formula Editor} + +\key{edit formulas in separate buffer}{C-c '} +\key{exit and install new formulas}{C-c C-c} +\key{exit, install, and apply new formulas}{C-u C-c C-c} +\key{abort}{C-c C-q} +\key{toggle reference style}{C-c C-r} +\key{pretty-print Lisp formula}{TAB} +\key{complete Lisp symbol}{M-TAB} +\key{shift reference point}{S-cursor} +\key{shift test line for column references}{M-up/down} +\key{scroll the window showing the table}{M-S-up/down} +\key{toggle table coordinate grid}{C-c \}} + +\section{Links} + +\key{globally store link to the current location}{C-c l \noteone} +\key{insert a link (TAB completes stored links)}{C-c C-l} +\key{insert file link with file name completion}{C-u C-c C-l} +\key{edit (also hidden part of) link at point}{C-c C-l} + +\key{open file links in emacs}{C-c C-o} +\key{...force open in emacs/other window}{C-u C-c C-o} +\key{open link at point}{mouse-1/2} +\key{...force open in emacs/other window}{mouse-3} +\key{record a position in mark ring}{C-c \%} +\key{jump back to last followed link(s)}{C-c \&} +\key{find next link}{C-c C-x C-n} +\key{find previous link}{C-c C-x C-p} +\key{edit code snippet of file at point}{C-c '} +\key{toggle inline display of linked images}{C-c C-x C-v} + +\section{Working with Code (Babel)} + +\key{execute code block at point}{C-c C-c} +\key{open results of code block at point}{C-c C-o} +\key{check code block at point for errors}{C-c C-v c} +\key{insert a header argument with completion}{C-c C-v j} +\key{view expanded body of code block at point}{C-c C-v v} +\key{view information about code block at point}{C-c C-v I} +\key{go to named code block}{C-c C-v g} +\key{go to named result}{C-c C-v r} +\key{go to the head of the current code block}{C-c C-v u} +\key{go to the next code block}{C-c C-v n} +\key{go to the previous code block}{C-c C-v p} +\key{demarcate a code block}{C-c C-v d} +\key{execute next key sequence in code edit buffer}{C-c C-v x} +\key{execute all code blocks in current buffer}{C-c C-v b} +\key{execute all code blocks in current subtree}{C-c C-v s} +\key{tangle code blocks in current file}{C-c C-v t} +\key{tangle code blocks in supplied file}{C-c C-v f} +\key{ingest all code blocks in supplied file into the Library of Babel}{C-c C-v i} +\key{switch to the session of the current code block}{C-c C-v z} +\key{load the current code block into a session}{C-c C-v l} +\key{view sha1 hash of the current code block}{C-c C-v a} + +\section{Completion and Template Insertion} + +In-buffer completion completes TODO keywords at headline start, TeX +macros after ``{\tt \\}'', option keywords after ``{\tt \#-}'', TAGS +after ``{\tt :}'', and dictionary words elsewhere. + +\key{complete word at point}{M-TAB} +\key{structure template (insert or wrap region)}{C-c C-,} + + +\newcolumn +\title{Org-Mode Reference Card (2/2)} + +\centerline{(for version \orgversionnumber)} + +\section{TODO Items and Checkboxes} + +\key{rotate the state of the current item}{C-c C-t} +\metax{select next/previous state}{\quad\quad S-LEFT/RIGHT} +\metax{select next/previous set}{\quad\quad\quad C-S-LEFT/RIGHT} +\key{toggle ORDERED property}{C-c C-x o} + +\key{view TODO items in a sparse tree}{C-c / t} +\key{view 3rd TODO keyword's sparse tree}{C-3 C-c / t} +\key{set the priority of the current item}{C-c , [ABC]} +\key{remove priority cookie from current item}{C-c , SPC} +\key{raise/lower priority of current item}{S-UP/DOWN\notetwo} + +\key{insert new checkbox item in plain list}{M-S-RET} +\key{toggle checkbox(es) in region/entry/at point}{C-c C-x C-b} +\key{toggle checkbox at point}{C-c C-c} +%\metax{checkbox statistics cookies: insert {\tt [/]} or {\tt [\%]}}{} +\key{update checkbox statistics (\kbd{C-u} : whole file)}{C-c \#} + +\section{Tags} + +\key{set tags for current heading}{C-c C-q} +\key{realign tags in all headings}{C-u C-c C-q} +\key{create sparse tree with matching tags}{C-c \\} +\key{globally (agenda) match tags at cursor}{C-c C-o} + +\section{Properties and Column View} + +\key{set property/effort}{C-c C-x p/e} +\key{special commands in property lines}{C-c C-c} +\key{next/previous allowed value}{S-LEFT/RIGHT} +\key{turn on column view}{C-c C-x C-c} +\key{capture columns view in dynamic block}{C-c C-x x} + +\key{quit column view}{q} +\key{show full value}{v} +\key{edit value}{e} +\metax{next/previous allowed value}{n/p or S-LEFT/RIGHT} +\key{edit allowed values list}{a} +\key{make column wider/narrower}{> / <} +\key{move column left/right}{M-LEFT/RIGHT} +\key{add new column}{M-S-RIGHT} +\key{Delete current column}{M-S-LEFT} + + +\section{Timestamps} + +\key{prompt for date and insert timestamp}{C-c .} +\key{like \kbd{C-c .} but insert date and time format}{C-u C-c .} +\key{like \kbd{C-c .} but make stamp inactive}{C-c !} % FIXME +\key{insert DEADLINE timestamp}{C-c C-d} +\key{insert SCHEDULED timestamp}{C-c C-s} +\key{create sparse tree with all deadlines due}{C-c / d} +\key{the time between 2 dates in a time range}{C-c C-y} +\metax{change timestamp at cursor $\pm 1$ day}{\quad\quad\quad\quad S-RIGHT/LEFT \notetwo} +\key{change year/month/day at cursor by $\pm 1$}{S-UP/DOWN \notetwo} +\key{access the calendar for the current date}{C-c >} +\key{insert timestamp matching date in calendar}{C-c <} +\key{access agenda for current date}{C-c C-o} +\key{select date while prompted}{mouse-1/RET} +%\key{... select date in calendar}{mouse-1/RET} +%\key{... scroll calendar back/forward one month}{< / >} +%\key{... forward/backward one day}{S-LEFT/RIGHT} +%\key{... forward/backward one week}{S-UP/DOWN} +%\key{... forward/backward one month}{M-S-LEFT/RIGHT} +\key{toggle custom format display for dates/times}{C-c C-x C-t} + +\newcolumn + +{\bf Clocking time} + +\key{start clock on current item}{C-c C-x C-i} +\key{stop/cancel clock on current item}{C-c C-x C-o/x} +\key{display total subtree times}{C-c C-x C-d} +\key{remove displayed times}{C-c C-c} +\key{insert/update table with clock report}{C-c C-x C-x} + +\section{Agenda Views} + +\key{add/move current file to front of agenda}{C-c [} +\key{remove current file from your agenda}{C-c ]} +\key{cycle through agenda file list}{C-'} +\key{set/remove restriction lock}{C-c C-x } + +\key{compile agenda for the current week}{C-c a a \noteone} +\key{compile global TODO list}{C-c a t \noteone} +\key{compile TODO list for specific keyword}{C-c a T \noteone} +\key{match tags, TODO kwds, properties}{C-c a m \noteone} +\key{match only in TODO entries}{C-c a M \noteone} +\key{find stuck projects}{C-c a \# \noteone} +\key{configure custom commands}{C-c a C \noteone} +%\key{configure stuck projects}{C-c a ! \noteone} +\key{agenda for date at cursor}{C-c C-o} + +{\bf Commands available in an agenda buffer} + +{\bf View Org file} + +\key{show original location of item}{SPC/mouse-3} +%\key{... also available with}{mouse-3} +\key{show and recenter window}{L} +\key{goto original location in other window}{TAB/mouse-2} +%\key{... also available with}{mouse-2} +\key{goto original location, delete other windows}{RET} +\key{show subtree in indirect buffer, ded.\ frame}{C-c C-x b} +\key{toggle follow-mode}{F} + +{\bf Change display} + +\key{delete other windows}{o} +\key{view mode dispatcher}{v} +\key{switch to day/week/month/year/def view}{d w vm vy vSP} +\key{toggle diary entries / time grid / habits}{D / G / K} +\key{toggle entry text / clock report}{E / R} +\key{toggle display of logbook entries}{l / v l/L/c} +\key{toggle inclusion of archived trees/files}{v a/A} +\key{refresh agenda buffer with any changes}{r / g} +\key{filter with respect to a tag}{/} +\key{save all org-mode buffers}{s} +\key{display next/previous day,week,...}{f / b} +\key{goto today / some date (prompt)}{. / j} + +{\bf Remote editing} + +\key{digit argument}{0-9} +\key{change state of current TODO item}{t} +\key{kill item and source}{C-k} +\key{archive default}{\$ / a} +\key{refile the subtree}{C-c C-w} +\key{set/show tags of current headline}{: / T} +\key{set effort property (prefix=nth)}{e} +\key{set / compute priority of current item}{, / P} +\key{raise/lower priority of current item}{S-UP/DOWN\notetwo} +\key{run an attachment command}{C-c C-a} +\key{schedule/set deadline for this item}{C-c C-s/d} +\metax{change timestamp one day earlier/later}{S-LEFT/RIGHT\notetwo} +\key{change timestamp to today}{>} +\key{insert new entry into diary}{i} +\newcolumn +\key{start/stop/cancel the clock on current item}{I / O / X} +\key{jump to running clock entry}{J} +\key{mark / unmark / execute bulk action}{m / u / B} + +{\bf Misc} + +\key{follow one or offer all links in current entry}{C-c C-o} + +{\bf Calendar commands} + +\key{find agenda cursor date in calendar}{c} +\key{compute agenda for calendar cursor date}{c} +\key{show phases of the moon}{M} +\key{show sunrise/sunset times}{S} +\key{show holidays}{H} +\key{convert date to other calendars}{C} + +{\bf Quit and Exit} + +\key{quit agenda, remove agenda buffer}{q} +\key{exit agenda, remove all agenda buffers}{x} + +\section{LaTeX and cdlatex-mode} + +\key{preview LaTeX fragment}{C-c C-x C-l} +\key{expand abbreviation (cdlatex-mode)}{TAB} +\key{insert/modify math symbol (cdlatex-mode)}{` / '} +\key{insert citation using RefTeX}{C-c C-x [} + +\section{Exporting and Publishing} + +Exporting creates files with extensions {\it .txt\/} and {\it .html\/} +in the current directory. Publishing puts the resulting file into +some other place. + +\key{export/publish dispatcher}{C-c C-e} + +\key{toggle asynchronous export}{C-c C-e C-a} +\key{toggle body/visible only export}{C-c C-e C-b/v} +\key{toggle subtree export}{C-c C-e C-s} +\key{insert template of export options}{C-c C-e \#} + +\key{toggle fixed width for entry or region}{C-c :} +\key{toggle pretty display of scripts, entities}{C-c C-x {\tt\char`\\}} + +Lines starting with \kbd{\#} and subtrees starting with COMMENT are +never exported. + +\key{toggle COMMENT keyword on entry}{C-c ;} + +\section{Dynamic Blocks} + +\key{update dynamic block at point}{C-c C-x C-u} +\metax{update all dynamic blocks}{C-u C-c C-x C-u} + +\section{Notes} +[1] This is only a suggestion for a binding of this command. Choose +your own key as shown under ACTIVATION. + +[2] Keybinding affected by {\tt org-support-shift-select} and also + {\tt org-replace-disputed-keys}. + +\copyrightnotice + +\bye + +% Local variables: +% compile-command: "pdftex orgcard" +% End: diff --git a/elpa/org-9.5.2/doc/orgguide.texi b/elpa/org-9.5.2/doc/orgguide.texi new file mode 100644 index 0000000..5b4a116 --- /dev/null +++ b/elpa/org-9.5.2/doc/orgguide.texi @@ -0,0 +1,2688 @@ +\input texinfo @c -*- texinfo -*- +@c %**start of header +@setfilename orgguide.info +@settitle Org Mode Compact Guide +@documentencoding UTF-8 +@documentlanguage en +@set txicodequoteundirected +@set txicodequotebacktick +@set MAINTAINERSITE @uref{https://orgmode.org,maintainers webpage} +@set MAINTAINER Bastien Guerry +@set MAINTAINEREMAIL @email{bzg@gnu.org} +@set MAINTAINERCONTACT @uref{mailto:bzg@gnu.org,contact the maintainer} +@c %**end of header + +@copying +Copyright @copyright{} 2004--2021 Free Software Foundation, Inc. + +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,'' +and with the Back-Cover Texts as in (a) below. A copy of the license +is included in the section entitled ``GNU Free Documentation License.'' +in the full Org manual, which is distributed together with this +compact guide. + +(a) The FSF's Back-Cover Text is: ``You have the freedom to copy and +modify this GNU manual.'' + +@end quotation +@end copying + +@dircategory Emacs editing modes +@direntry +* Org Guide: (orgguide). Abbreviated Org mode manual. +@end direntry + +@finalout +@titlepage +@title Org Mode Compact Guide +@subtitle Release 9.5 +@author The Org Mode Developers +@page +@vskip 0pt plus 1filll +@insertcopying +@end titlepage + +@contents + +@ifnottex +@node Top +@top Org Mode Compact Guide + +@insertcopying +@end ifnottex + +@menu +* Introduction:: Welcome! +* Document Structure:: A tree works like your brain. +* Tables:: Pure magic for quick formatting. +* Hyperlinks:: Notes in context. +* TODO Items:: Every tree branch can be a TODO item. +* Tags:: Tagging headlines and matching sets of tags. +* Properties:: Storing information about an entry. +* Dates and Times:: Making items useful for planning. +* Capture, Refile, Archive: Capture Refile Archive. The ins and outs for projects. +* Agenda Views:: Collecting information into views. +* Markup:: Compose beautiful documents. +* Exporting:: Sharing and publishing notes. +* Publishing:: Create a web site of linked Org files. +* Working with Source Code:: Export, evaluate, and tangle code blocks. +* Miscellaneous:: All the rest which did not fit elsewhere. + +@detailmenu +--- The Detailed Node Listing --- + +Document Structure + +* Headlines:: How to typeset Org tree nodes. +* Visibility Cycling:: Show and hide, much simplified. +* Motion:: Jumping to other headlines. +* Structure Editing:: Changing sequence and level of headlines. +* Sparse Trees:: Matches embedded in context. +* Plain Lists:: Additional structure within an entry. + +TODO Items + +* TODO Basics:: Marking and displaying TODO entries. +* Multi-state Workflow:: More than just on/off. +* Progress Logging:: Dates and notes for progress. +* Priorities:: Some things are more important than others. +* Breaking Down Tasks:: Splitting a task into manageable pieces. +* Checkboxes:: Tick-off lists. + +Dates and Times + +* Timestamps:: Assigning a time to a tree entry. +* Creating Timestamps:: Commands that insert timestamps. +* Deadlines and Scheduling:: Planning your work. +* Clocking Work Time:: Tracking how long you spent on a task. + +Capture, Refile, Archive + +* Capture:: Capturing new stuff. +* Refile and Copy:: Moving/copying a tree from one place to another. +* Archiving:: What to do with finished products. + +Agenda Views + +* Agenda Files:: Files being searched for agenda information. +* Agenda Dispatcher:: Keyboard access to agenda views. +* Built-in Agenda Views:: What is available out of the box? +* Global TODO List:: All unfinished action items. +* Matching Tags and Properties:: Structured information with fine-tuned search. +* Search View:: Find entries by searching for text. +* Agenda Commands:: Remote editing of Org trees. +* Custom Agenda Views:: Defining special searches and views. + +Markup + +* Paragraphs:: The basic unit of text. +* Emphasis and Monospace:: Bold, italic, etc. +* Embedded @LaTeX{}:: LaTeX can be freely used inside Org documents. +* Literal examples:: Source code examples with special formatting. +* Images:: Display an image. +* Creating Footnotes:: Edit and read footnotes. + +Exporting + +* The Export Dispatcher:: The main interface. +* Export Settings:: Common export settings. +* Table of Contents:: The if and where of the table of contents. +* Include Files:: Include additional files into a document. +* Comment Lines:: What will not be exported. +* ASCII/UTF-8 Export:: Exporting to flat files with encoding. +* HTML Export:: Exporting to HTML. +* @LaTeX{} Export:: Exporting to @LaTeX{} and processing to PDF. +* iCalendar Export:: Exporting to iCalendar. + +@end detailmenu +@end menu + +@node Introduction +@chapter Introduction + +Org is a mode for keeping notes, maintaining TODO lists, and doing +project planning with a fast and effective plain-text system. It is +also an authoring and publishing system, and it supports working with +source code for literal programming and reproducible research. + +This document is a much compressed derivative of the @ref{Top,comprehensive Org +mode manual,,org,}. It contains all basic features and commands, along with +important hints for customization. It is intended for beginners who +would shy back from a 200 pages manual because of sheer size. + +@anchor{Installation} +@heading Installation + +@quotation Important +If you are using a version of Org that is part of the Emacs +distribution, please skip this section and go directly to @ref{Activation}. + +@end quotation + +If you have downloaded Org from the web, either as a distribution +@samp{.zip} or @samp{.tar} file, or as a Git archive, it is best to run it +directly from the distribution directory. You need to add the @samp{lisp/} +subdirectories to the Emacs load path. To do this, add the following +line to your Emacs init file: + +@example +(add-to-list 'load-path "~/path/to/orgdir/lisp") +@end example + + +@noindent +If you have been using git or a tar ball to get Org, you need to run +the following command to generate autoload information. + +@example +make autoloads +@end example + +@anchor{Activation} +@heading Activation + +Add the following lines to your Emacs init file to define @emph{global} +keys for three commands that are useful in any Emacs buffer, not just +Org buffers. Please choose suitable keys yourself. + +@lisp +(global-set-key (kbd "C-c l") #'org-store-link) +(global-set-key (kbd "C-c a") #'org-agenda) +(global-set-key (kbd "C-c c") #'org-capture) +@end lisp + +Files with extension @samp{.org} will be put into Org mode automatically. + +@anchor{Feedback} +@heading Feedback + +If you find problems with Org, or if you have questions, remarks, or +ideas about it, please mail to the Org mailing list +@email{emacs-orgmode@@gnu.org}. For information on how to submit bug +reports, see the main manual. + +@node Document Structure +@chapter Document Structure + +Org is an outliner. Outlines allow a document to be organized in +a hierarchical structure, which, least for me, is the best +representation of notes and thoughts. An overview of this structure +is achieved by folding, i.e., hiding large parts of the document to +show only the general document structure and the parts currently being +worked on. Org greatly simplifies the use of outlines by compressing +the entire show and hide functionalities into a single command, +@code{org-cycle}, which is bound to the @kbd{@key{TAB}} key. + +@menu +* Headlines:: How to typeset Org tree nodes. +* Visibility Cycling:: Show and hide, much simplified. +* Motion:: Jumping to other headlines. +* Structure Editing:: Changing sequence and level of headlines. +* Sparse Trees:: Matches embedded in context. +* Plain Lists:: Additional structure within an entry. +@end menu + +@node Headlines +@section Headlines + +Headlines define the structure of an outline tree. The headlines in +Org start on the left margin@footnote{See the variable @code{org-special-ctrl-a/e} to configure special +behavior of @kbd{C-a} and @kbd{C-e} in headlines.} with one or more stars followed by +a space. For example: + +@example +* Top level headline +** Second level +*** Third level + some text +*** Third level + more text +* Another top level headline +@end example + +Note that a headline named after @code{org-footnote-section}, which +defaults to @samp{Footnotes}, is considered as special. A subtree with +this headline will be silently ignored by exporting functions. + +Some people find the many stars too noisy and would prefer an outline +that has whitespace followed by a single star as headline starters. +See @ref{Miscellaneous} for a setup to realize this. + +@node Visibility Cycling +@section Visibility Cycling + +Outlines make it possible to hide parts of the text in the buffer. +Org uses just two commands, bound to @kbd{@key{TAB}} and +@{@{@{kbd@{S-TAB)@}@}@} to change the visibility in the buffer. + +@table @asis +@item @kbd{@key{TAB}} +@emph{Subtree cycling}: Rotate current subtree among the states + +@example +,-> FOLDED -> CHILDREN -> SUBTREE --. +'-----------------------------------' +@end example + + +When called with a prefix argument (@kbd{C-u @key{TAB}}), or with the +Shift key, global cycling is invoked. + +@item @kbd{S-@key{TAB}} +@itemx @kbd{C-u @key{TAB}} +@emph{Global cycling}: Rotate the entire buffer among the states + +@example +,-> OVERVIEW -> CONTENTS -> SHOW ALL --. +'--------------------------------------' +@end example + +@item @kbd{C-u C-u C-u @key{TAB}} +Show all, including drawers. +@end table + +When Emacs first visits an Org file, the global state is set to +OVERVIEW, i.e., only the top level headlines are visible. This can be +configured through the variable @code{org-startup-folded}, or on a per-file +basis by adding a @samp{STARTUP} keyword to @samp{overview}, @samp{content}, +@samp{showall}, @samp{showeverything} or @samp{showlevels} (n = 2..5) like this: + +@example +#+STARTUP: content +@end example + +@node Motion +@section Motion + +The following commands jump to other headlines in the buffer. + +@table @asis +@item @kbd{C-c C-n} +Next heading. + +@item @kbd{C-c C-p} +Previous heading. + +@item @kbd{C-c C-f} +Next heading same level. + +@item @kbd{C-c C-b} +Previous heading same level. + +@item @kbd{C-c C-u} +Backward to higher level heading. +@end table + +@node Structure Editing +@section Structure Editing + +@table @asis +@item @kbd{M-@key{RET}} +Insert new heading with same level as current. If point is in +a plain list item, a new item is created (see @ref{Plain Lists}). When +this command is used in the middle of a line, the line is split and +the rest of the line becomes the new headline@footnote{If you do not want the line to be split, customize the variable +@code{org-M-RET-may-split-line}.}. + +@item @kbd{M-S-@key{RET}} +Insert new TODO entry with same level as current heading. + +@item @kbd{@key{TAB}} in new +@itemx empty entry +In a new entry with no text yet, @kbd{@key{TAB}} cycles through +reasonable levels. + +@item @kbd{M-@key{LEFT}} +@itemx @kbd{M-@key{RIGHT}} +Promote or demote current heading by one level. + +@item @kbd{M-@key{UP}} +@itemx @kbd{M-@key{DOWN}} +Move subtree up or down, i.e., swap with previous or next subtree of +same level. + +@item @kbd{C-c C-w} +Refile entry or region to a different location. See @ref{Refile and Copy}. + +@item @kbd{C-x n s} +@itemx @kbd{C-x n w} +Narrow buffer to current subtree and widen it again. +@end table + +When there is an active region (Transient Mark mode), promotion and +demotion work on all headlines in the region. + +@node Sparse Trees +@section Sparse Trees + +An important feature of Org mode is the ability to construct @emph{sparse +trees} for selected information in an outline tree, so that the entire +document is folded as much as possible, but the selected information +is made visible along with the headline structure above it@footnote{See also the variable @code{org-show-context-detail} to decide how +much context is shown around each match.}. +Just try it out and you will see immediately how it works. + +Org mode contains several commands creating such trees, all these +commands can be accessed through a dispatcher: + +@table @asis +@item @kbd{C-c /} +This prompts for an extra key to select a sparse-tree creating +command. + +@item @kbd{C-c / r} +Occur. Prompts for a regexp and shows a sparse tree with all +matches. Each match is also highlighted; the highlights disappear +by pressing @kbd{C-c C-c}. + +The other sparse tree commands select headings based on TODO +keywords, tags, or properties and will be discussed later in this +manual. +@end table + +@node Plain Lists +@section Plain Lists + +Within an entry of the outline tree, hand-formatted lists can provide +additional structure. They also provide a way to create lists of +checkboxes (see @ref{Checkboxes}). Org supports editing such lists, and +every exporter (see @ref{Exporting}) can parse and format them. + +Org knows ordered lists, unordered lists, and description lists. + +@itemize +@item +@emph{Unordered} list items start with @samp{-}, @samp{+}, or @samp{*} as bullets. + +@item +@emph{Ordered} list items start with @samp{1.}, or @samp{1)}. + +@item +@emph{Description} list use @samp{::} to separate the @emph{term} from the +description. +@end itemize + +Items belonging to the same list must have the same indentation on the +first line. An item ends before the next line that is indented like +its bullet/number, or less. A list ends when all items are closed, or +before two blank lines. An example: + +@example +* Lord of the Rings + My favorite scenes are (in this order) + 1. The attack of the Rohirrim + 2. Eowyn's fight with the witch king + + this was already my favorite scene in the book + + I really like Miranda Otto. + Important actors in this film are: + - Elijah Wood :: He plays Frodo + - Sean Astin :: He plays Sam, Frodo's friend. +@end example + +The following commands act on items when point is in the first line of +an item (the line with the bullet or number). + +@table @asis +@item @kbd{@key{TAB}} +Items can be folded just like headline levels. + +@item @kbd{M-@key{RET}} +Insert new item at current level. With a prefix argument, force +a new heading (see @ref{Structure Editing}). + +@item @kbd{M-S-@key{RET}} +Insert a new item with a checkbox (see @ref{Checkboxes}). + +@item @kbd{M-S-@key{UP}} +@itemx @kbd{M-S-@key{DOWN}} +Move the item including subitems up/down (swap with previous/next +item of same indentation). If the list is ordered, renumbering is +automatic. + +@item @kbd{M-@key{LEFT}} +@itemx @kbd{M-@key{RIGHT}} +Decrease/increase the indentation of an item, leaving children +alone. + +@item @kbd{M-S-@key{LEFT}} +@itemx @kbd{M-S-@key{RIGHT}} +Decrease/increase the indentation of the item, including subitems. + +@item @kbd{C-c C-c} +If there is a checkbox (see @ref{Checkboxes}) in the item line, toggle +the state of the checkbox. Also verify bullets and indentation +consistency in the whole list. + +@item @kbd{C-c -} +Cycle the entire list level through the different itemize/enumerate +bullets (@samp{-}, @samp{+}, @samp{*}, @samp{1.}, @samp{1)}). +@end table + +@node Tables +@chapter Tables + +Org comes with a fast and intuitive table editor. Spreadsheet-like +calculations are supported in connection with the Emacs Calc package +(see @ref{Top,GNU Emacs Calculator Manual,,calc,}). + +Org makes it easy to format tables in plain ASCII@. Any line with @samp{|} +as the first non-whitespace character is considered part of a table. +@samp{|} is also the column separator. A table might look like this: + +@example +| Name | Phone | Age | +|-------+-------+-----| +| Peter | 1234 | 17 | +| Anna | 4321 | 25 | +@end example + +A table is re-aligned automatically each time you press @kbd{@key{TAB}} +or @kbd{@key{RET}} or @kbd{C-c C-c} inside the table. +@kbd{@key{TAB}} also moves to the next field (@kbd{@key{RET}} to the +next row) and creates new table rows at the end of the table or before +horizontal lines. The indentation of the table is set by the first +line. Any line starting with @samp{|-} is considered as a horizontal +separator line and will be expanded on the next re-align to span the +whole table width. So, to create the above table, you would only type + +@example +|Name|Phone|Age| +|- +@end example + + +@noindent +and then press @kbd{@key{TAB}} to align the table and start filling in +fields. Even faster would be to type @samp{|Name|Phone|Age} followed by +@kbd{C-c @key{RET}}. + +When typing text into a field, Org treats @kbd{DEL}, +@kbd{Backspace}, and all character keys in a special way, so that +inserting and deleting avoids shifting other fields. Also, when +typing @emph{immediately after point was moved into a new field with +@kbd{@key{TAB}}, @kbd{S-@key{TAB}} or @kbd{@key{RET}}}, the field is +automatically made blank. + +@anchor{Creation and conversion} +@heading Creation and conversion + +@table @asis +@item @kbd{C-c |} +Convert the active region to table. If every line contains at least +one @kbd{@key{TAB}} character, the function assumes that the material +is tab separated. If every line contains a comma, comma-separated +values (CSV) are assumed. If not, lines are split at whitespace +into fields. + +If there is no active region, this command creates an empty Org +table. But it is easier just to start typing, like @kbd{| N a m e | P h o n e | A g e @key{RET} | - @key{TAB}}. +@end table + +@anchor{Re-aligning and field motion} +@heading Re-aligning and field motion + +@table @asis +@item @kbd{C-c C-c} +Re-align the table without moving point. + +@item @kbd{@key{TAB}} +Re-align the table, move to the next field. Creates a new row if +necessary. + +@item @kbd{S-@key{TAB}} +Re-align, move to previous field. + +@item @kbd{@key{RET}} +Re-align the table and move down to next row. Creates a new row if +necessary. + +@item @kbd{S-@key{UP}} +@itemx @kbd{S-@key{DOWN}} +@itemx @kbd{S-@key{LEFT}} +@itemx @kbd{S-@key{RIGHT}} +Move a cell up, down, left, and right by swapping with adjacent +cell. +@end table + +@anchor{Column and row editing} +@heading Column and row editing + +@table @asis +@item @kbd{M-@key{LEFT}}, @kbd{M-@key{RIGHT}} +Move the current column left/right. + +@item @kbd{M-S-@key{LEFT}} +Kill the current column. + +@item @kbd{M-S-@key{RIGHT}} +Insert a new column to the left of point position. + +@item @kbd{M-@key{UP}}, @kbd{M-@key{DOWN}} +Move the current row up/down. + +@item @kbd{M-S-@key{UP}} +Kill the current row or horizontal line. + +@item @kbd{M-S-@key{DOWN}} +Insert a new row above the current row. With a prefix argument, the +line is created below the current one. + +@item @kbd{C-c -} +Insert a horizontal line below current row. With a prefix argument, +the line is created above the current line. + +@item @kbd{C-c @key{RET}} +Insert a horizontal line below current row, and move the point into +the row below that line. + +@item @kbd{C-c ^} +Sort the table lines in the region. The position of point indicates +the column to be used for sorting, and the range of lines is the +range between the nearest horizontal separator lines, or the entire +table. +@end table + +@node Hyperlinks +@chapter Hyperlinks + +Like HTML, Org provides links inside a file, external links to other +files, Usenet articles, emails, and much more. + +Org recognizes plain URIs, possibly wrapped within angle brackets, and +activate them as clickable links. The general link format, however, +looks like this: + +@example +[[LINK][DESCRIPTION]] +@end example + + +@noindent +or alternatively + +@example +[[LINK]] +@end example + + +Once a link in the buffer is complete, with all brackets present, Org +changes the display so that @samp{DESCRIPTION} is displayed instead of +@samp{[[LINK][DESCRIPTION]]} and @samp{LINK} is displayed instead of @samp{[[LINK]]}. +To edit the invisible @var{LINK} part, use @kbd{C-c C-l} +with the point on the link. + +@anchor{Internal links} +@heading Internal links + +If the link does not look like a URL, it is considered to be internal +in the current file. The most important case is a link like +@samp{[[#my-custom-id]]} which links to the entry with the @samp{CUSTOM_ID} property +@samp{my-custom-id}. + +Links such as @samp{[[My Target]]} or @samp{[[My Target][Find my target]]} lead +to a text search in the current file for the corresponding target, +which looks like @samp{<>}. + +@anchor{External Links} +@heading External Links + +Org supports links to files, websites, Usenet and email messages, BBDB +database entries and links to both IRC conversations and their logs. +External links are URL-like locators. They start with a short +identifying string followed by a colon. There can be no space after +the colon. Here are some examples: + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{http://www.astro.uva.nl/=dominik} +@tab on the web +@item @samp{file:/home/dominik/images/jupiter.jpg} +@tab file, absolute path +@item @samp{/home/dominik/images/jupiter.jpg} +@tab same as above +@item @samp{file:papers/last.pdf} +@tab file, relative path +@item @samp{./papers/last.pdf} +@tab same as above +@item @samp{file:projects.org} +@tab another Org file +@item @samp{docview:papers/last.pdf::NNN} +@tab open in DocView mode at page @var{NNN} +@item @samp{id:B7423F4D-2E8A-471B-8810-C40F074717E9} +@tab link to heading by ID +@item @samp{news:comp.emacs} +@tab Usenet link +@item @samp{mailto:adent@@galaxy.net} +@tab mail link +@item @samp{mhe:folder#id} +@tab MH-E message link +@item @samp{rmail:folder#id} +@tab Rmail message link +@item @samp{gnus:group#id} +@tab Gnus article link +@item @samp{bbdb:R.*Stallman} +@tab BBDB link (with regexp) +@item @samp{irc:/irc.com/#emacs/bob} +@tab IRC link +@item @samp{info:org#Hyperlinks} +@tab Info node link +@end multitable + +File links can contain additional information to make Emacs jump to +a particular location in the file when following a link. This can be +a line number or a search option after a double colon. Here are a few +examples,, together with an explanation: + +@multitable {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{file:~/code/main.c::255} +@tab Find line 255 +@item @samp{file:~/xx.org::My Target} +@tab Find @samp{<>} +@item @samp{[[file:~/xx.org::#my-custom-id]]} +@tab Find entry with a custom ID +@end multitable + +@anchor{Handling Links} +@heading Handling Links + +Org provides methods to create a link in the correct syntax, to insert +it into an Org file, and to follow the link. + +The main function is @code{org-store-link}, called with @kbd{M-x org-store-link}. Because of its importance, we suggest to bind it +to a widely available key (see @ref{Activation}). It stores a link to the +current location. The link is stored for later insertion into an Org +buffer---see below. + +From an Org buffer, the following commands create, navigate or, more +generally, act on links. + +@table @asis +@item @kbd{C-c C-l} +Insert a link. This prompts for a link to be inserted into the +buffer. You can just type a link, or use history keys @kbd{@key{UP}} +and @kbd{@key{DOWN}} to access stored links. You will be prompted +for the description part of the link. + +When called with a @kbd{C-u} prefix argument, file name +completion is used to link to a file. + +@item @kbd{C-c C-l} (with point on existing link) +When point is on an existing link, @kbd{C-c C-l} allows you to +edit the link and description parts of the link. + +@item @kbd{C-c C-o} +Open link at point. + +@item @kbd{C-c &} +Jump back to a recorded position. A position is recorded by the +commands following internal links, and by @kbd{C-c %}. Using +this command several times in direct succession moves through a ring +of previously recorded positions. +@end table + +@node TODO Items +@chapter TODO Items + +Org mode does not require TODO lists to live in separate documents. +Instead, TODO items are part of a notes file, because TODO items +usually come up while taking notes! With Org mode, simply mark any +entry in a tree as being a TODO item. In this way, information is not +duplicated, and TODO items remain in the context from which they +emerged. + +Org mode provides methods to give you an overview of all the things +that you have to do, collected from many files. + +@menu +* TODO Basics:: Marking and displaying TODO entries. +* Multi-state Workflow:: More than just on/off. +* Progress Logging:: Dates and notes for progress. +* Priorities:: Some things are more important than others. +* Breaking Down Tasks:: Splitting a task into manageable pieces. +* Checkboxes:: Tick-off lists. +@end menu + +@node TODO Basics +@section Basic TODO Functionality + +Any headline becomes a TODO item when it starts with the word @samp{TODO}, +for example: + +@example +*** TODO Write letter to Sam Fortune +@end example + + +The most important commands to work with TODO entries are: + +@table @asis +@item @kbd{C-c C-t} +Rotate the TODO state of the current item among + +@example +,-> (unmarked) -> TODO -> DONE --. +'--------------------------------' +@end example + + +The same rotation can also be done ``remotely'' from the agenda buffer +with the @kbd{t} command key (see @ref{Agenda Commands}). + +@item @kbd{S-@key{RIGHT}} +@itemx @kbd{S-@key{LEFT}} +Select the following/preceding TODO state, similar to cycling. + +@item @kbd{C-c / t} +View TODO items in a @emph{sparse tree} (see @ref{Sparse Trees}). Folds the +entire buffer, but shows all TODO items---with not-DONE state---and +the headings hierarchy above them. + +@item @kbd{M-x org-agenda t} +Show the global TODO list. Collects the TODO items (with not-DONE +states) from all agenda files (see @ref{Agenda Views}) into a single +buffer. See @ref{Global TODO List}, for more information. + +@item @kbd{S-M-@key{RET}} +Insert a new TODO entry below the current one. +@end table + +Changing a TODO state can also trigger tag changes. See the docstring +of the option @code{org-todo-state-tags-triggers} for details. + +@node Multi-state Workflow +@section Multi-state Workflow + +You can use TODO keywords to indicate @@emph@{sequential@} working progress +states: + +@lisp +(setq org-todo-keywords + '((sequence "TODO" "FEEDBACK" "VERIFY" "|" "DONE" "DELEGATED"))) +@end lisp + +@noindent +The vertical bar separates the @samp{TODO} keywords (states that @emph{need +action}) from the @samp{DONE} states (which need @emph{no further action}). If +you do not provide the separator bar, the last state is used as the +@samp{DONE} state. With this setup, the command @kbd{C-c C-t} cycles +an entry from @samp{TODO} to @samp{FEEDBACK}, then to @samp{VERIFY}, and finally to +@samp{DONE} and @samp{DELEGATED}. + +Sometimes you may want to use different sets of TODO keywords in +parallel. For example, you may want to have the basic @samp{TODO=/=DONE}, +but also a workflow for bug fixing. Your setup would then look like +this: + +@lisp +(setq org-todo-keywords + '((sequence "TODO(t)" "|" "DONE(d)") + (sequence "REPORT(r)" "BUG(b)" "KNOWNCAUSE(k)" "|" "FIXED(f)"))) +@end lisp + +@noindent +The keywords should all be different, this helps Org mode to keep +track of which subsequence should be used for a given entry. The +example also shows how to define keys for fast access of a particular +state, by adding a letter in parenthesis after each keyword---you will +be prompted for the key after @kbd{C-c C-t}. + +To define TODO keywords that are valid only in a single file, use the +following text anywhere in the file. + +@example +#+TODO: TODO(t) | DONE(d) +#+TODO: REPORT(r) BUG(b) KNOWNCAUSE(k) | FIXED(f) +#+TODO: | CANCELED(c) +@end example + +After changing one of these lines, use @kbd{C-c C-c} with the +cursor still in the line to make the changes known to Org mode. + +@node Progress Logging +@section Progress Logging + +To record a timestamp and a note when changing a TODO state, call the +command @code{org-todo} with a prefix argument. + +@table @asis +@item @kbd{C-u C-c C-t} +Prompt for a note and record a the time of the TODO state change. +@end table + +Org mode can also automatically record a timestamp and optionally a +note when you mark a TODO item as DONE, or even each time you change +the state of a TODO item. This system is highly configurable, +settings can be on a per-keyword basis and can be localized to a file +or even a subtree. For information on how to clock working time for a +task, see @ref{Clocking Work Time}. + +@anchor{Closing items} +@subheading Closing items + +The most basic logging is to keep track of @emph{when} a certain TODO item +was marked as done. This can be achieved with@footnote{The corresponding in-buffer setting is @samp{#+STARTUP: logdone}.} + +@lisp +(setq org-log-done 'time) +@end lisp + +@noindent +Then each time you turn an entry from a TODO (not-done) state into any +of the DONE states, a line @samp{CLOSED: [timestamp]} is inserted just +after the headline. + +If you want to record a note along with the timestamp, use@footnote{The corresponding in-buffer setting is @samp{#+STARTUP: +logenotedone}.} + +@lisp +(setq org-log-done 'note) +@end lisp + +@noindent +You are then be prompted for a note, and that note is stored below the +entry with a @samp{Closing Note} heading. + +@anchor{Tracking TODO state changes} +@subheading Tracking TODO state changes + +You might want to keep track of TODO state changes. You can either +record just a timestamp, or a time-stamped note for a change. These +records are inserted after the headline as an itemized list. When +taking a lot of notes, you might want to get the notes out of the way +into a drawer. Customize the variable @code{org-log-into-drawer} to get +this behavior. + +For state logging, Org mode expects configuration on a per-keyword +basis. This is achieved by adding special markers @samp{!} (for +a timestamp) and @samp{@@} (for a note) in parentheses after each keyword. +For example: + +@example +#+TODO: TODO(t) WAIT(w@@/!) | DONE(d!) CANCELED(c@@) +@end example + + +@noindent +defines TODO keywords and fast access keys, and also request that +a time is recorded when the entry is set to @samp{DONE}, and that a note is +recorded when switching to @samp{WAIT} or @samp{CANCELED}. The same syntax +works also when setting @code{org-todo-keywords}. + +@node Priorities +@section Priorities + +If you use Org mode extensively, you may end up with enough TODO items +that it starts to make sense to prioritize them. Prioritizing can be +done by placing a @emph{priority cookie} into the headline of a TODO item, +like this + +@example +*** TODO [#A] Write letter to Sam Fortune +@end example + + +Org mode supports three priorities: @samp{A}, @samp{B}, and @samp{C}. @samp{A} is the +highest, @samp{B} the default if none is given. Priorities make +a difference only in the agenda. + +@table @asis +@item @kbd{C-c ,} +Set the priority of the current headline. Press @kbd{A}, +@kbd{B} or @kbd{C} to select a priority, or @kbd{@key{SPC}} +to remove the cookie. + +@item @kbd{S-@key{UP}} (@code{org-priority-up}) +@itemx @kbd{S-@key{DOWN}} (@code{org-priority-down}) +Increase/decrease the priority of the current headline. +@end table + +@node Breaking Down Tasks +@section Breaking Tasks Down into Subtasks + +It is often advisable to break down large tasks into smaller, +manageable subtasks. You can do this by creating an outline tree +below a TODO item, with detailed subtasks on the tree. To keep an +overview of the fraction of subtasks that have already been marked +as done, insert either @samp{[/]} or @samp{[%]} anywhere in the headline. These +cookies are updated each time the TODO status of a child changes, or +when pressing @kbd{C-c C-c} on the cookie. For example: + +@example +* Organize Party [33%] +** TODO Call people [1/2] +*** TODO Peter +*** DONE Sarah +** TODO Buy food +** DONE Talk to neighbor +@end example + +@node Checkboxes +@section Checkboxes + +Every item in a plain list (see @ref{Plain Lists}) can be made into +a checkbox by starting it with the string @samp{[ ]}. Checkboxes are not +included into the global TODO list, so they are often great to split +a task into a number of simple steps. + +Here is an example of a checkbox list. + +@example +* TODO Organize party [2/4] + - [-] call people [1/2] + - [ ] Peter + - [X] Sarah + - [X] order food +@end example + +Checkboxes work hierarchically, so if a checkbox item has children +that are checkboxes, toggling one of the children checkboxes makes the +parent checkbox reflect if none, some, or all of the children are +checked. + +The following commands work with checkboxes: + +@table @asis +@item @kbd{C-c C-c} +Toggle checkbox status or---with prefix argument---checkbox presence +at point. + +@item @kbd{M-S-@key{RET}} +Insert a new item with a checkbox. This works only if point is +already in a plain list item (see @ref{Plain Lists}). +@end table + +@node Tags +@chapter Tags + +An excellent way to implement labels and contexts for +cross-correlating information is to assign @emph{tags} to headlines. Org +mode has extensive support for tags. + +Every headline can contain a list of tags; they occur at the end of +the headline. Tags are normal words containing letters, numbers, @samp{_}, +and @samp{@@}. Tags must be preceded and followed by a single colon, e.g., +@samp{:work:}. Several tags can be specified, as in @samp{:work:urgent:}. Tags +by default are in bold face with the same color as the headline. + +@anchor{Tag inheritance} +@heading Tag inheritance + +Tags make use of the hierarchical structure of outline trees. If +a heading has a certain tag, all subheadings inherit the tag as well. +For example, in the list + +@example +* Meeting with the French group :work: +** Summary by Frank :boss:notes: +*** TODO Prepare slides for him :action: +@end example + +@noindent +the final heading has the tags @samp{work}, @samp{boss}, @samp{notes}, and @samp{action} +even though the final heading is not explicitly marked with those +tags. + +You can also set tags that all entries in a file should inherit just +as if these tags were defined in a hypothetical level zero that +surrounds the entire file. Use a line like this@footnote{As with all these in-buffer settings, pressing @kbd{C-c C-c} activates any changes in the line.}: + +@example +#+FILETAGS: :Peter:Boss:Secret: +@end example + +@anchor{Setting tags} +@heading Setting tags + +Tags can simply be typed into the buffer at the end of a headline. +After a colon, @kbd{M-@key{TAB}} offers completion on tags. There is +also a special command for inserting tags: + +@table @asis +@item @kbd{C-c C-q} +Enter new tags for the current headline. Org mode either offers +completion or a special single-key interface for setting tags, see +below. + +@item @kbd{C-c C-c} +When point is in a headline, this does the same as @kbd{C-c C-q}. +@end table + +Org supports tag insertion based on a @emph{list of tags}. By default this +list is constructed dynamically, containing all tags currently used in +the buffer. You may also globally specify a hard list of tags with +the variable @code{org-tag-alist}. Finally you can set the default tags +for a given file using the @samp{TAGS} keyword, like + +@example +#+TAGS: @@work @@home @@tennisclub +#+TAGS: laptop car pc sailboat +@end example + + +By default Org mode uses the standard minibuffer completion facilities +for entering tags. However, it also implements another, quicker, tag +selection method called @emph{fast tag selection}. This allows you to +select and deselect tags with just a single key press. For this to +work well you should assign unique letters to most of your commonly +used tags. You can do this globally by configuring the variable +@code{org-tag-alist} in your Emacs init file. For example, you may find +the need to tag many items in different files with @samp{@@home}. In this +case you can set something like: + +@lisp +(setq org-tag-alist '(("@@work" . ?w) ("@@home" . ?h) ("laptop" . ?l))) +@end lisp + +If the tag is only relevant to the file you are working on, then you +can instead set the @samp{TAGS} keyword as: + +@example +#+TAGS: @@work(w) @@home(h) @@tennisclub(t) laptop(l) pc(p) +@end example + +@anchor{Tag groups} +@heading Tag groups + +A tag can be defined as a @emph{group tag} for a set of other tags. The +group tag can be seen as the ``broader term'' for its set of tags. + +You can set group tags by using brackets and inserting a colon between +the group tag and its related tags: + +@example +#+TAGS: [ GTD : Control Persp ] +@end example + + +@noindent +or, if tags in the group should be mutually exclusive: + +@example +#+TAGS: @{ Context : @@Home @@Work @} +@end example + + +When you search for a group tag, it return matches for all members in +the group and its subgroups. In an agenda view, filtering by a group +tag displays or hide headlines tagged with at least one of the members +of the group or any of its subgroups. + +If you want to ignore group tags temporarily, toggle group tags +support with @code{org-toggle-tags-groups}, bound to @kbd{C-c C-x q}. + +@anchor{Tag searches} +@heading Tag searches + +@table @asis +@item @kbd{C-c / m} or @kbd{C-c \} +Create a sparse tree with all headlines matching a tags search. +With a @kbd{C-u} prefix argument, ignore headlines that are not +a TODO line. + +@item @kbd{M-x org-agenda m} +Create a global list of tag matches from all agenda files. See +@ref{Matching Tags and Properties}. + +@item @kbd{M-x org-agenda M} +Create a global list of tag matches from all agenda files, but check +only TODO items and force checking subitems (see the option +@code{org-tags-match-list-sublevels}). +@end table + +These commands all prompt for a match string which allows basic +Boolean logic like @samp{+boss+urgent-project1}, to find entries with tags +@samp{boss} and @samp{urgent}, but not @samp{project1}, or @samp{Kathy|Sally} to find +entries which are tagged, like @samp{Kathy} or @samp{Sally}. The full syntax of +the search string is rich and allows also matching against TODO +keywords, entry levels and properties. For a more detailed description +with many examples, see @ref{Matching Tags and Properties}. + +@node Properties +@chapter Properties + +Properties are key-value pairs associated with an entry. They live in +a special drawer with the name @samp{PROPERTIES}. Each property is +specified on a single line, with the key (surrounded by colons) first, +and the value after it: + +@example +* CD collection +** Classic +*** Goldberg Variations + :PROPERTIES: + :Title: Goldberg Variations + :Composer: J.S. Bach + :Publisher: Deutsche Grammophon + :NDisks: 1 + :END: +@end example + +You may define the allowed values for a particular property @samp{Xyz} by +setting a property @samp{Xyz_ALL}. This special property is @emph{inherited}, +so if you set it in a level 1 entry, it applies to the entire tree. +When allowed values are defined, setting the corresponding property +becomes easier and is less prone to typing errors. For the example +with the CD collection, we can pre-define publishers and the number of +disks in a box like this: + +@example +* CD collection + :PROPERTIES: + :NDisks_ALL: 1 2 3 4 + :Publisher_ALL: "Deutsche Grammophon" Philips EMI + :END: +@end example + +If you want to set properties that can be inherited by any entry in +a file, use a line like: + +@example +#+PROPERTY: NDisks_ALL 1 2 3 4 +@end example + + +The following commands help to work with properties: + +@table @asis +@item @kbd{C-c C-x p} +Set a property. This prompts for a property name and a value. + +@item @kbd{C-c C-c d} +Remove a property from the current entry. +@end table + +To create sparse trees and special lists with selection based on +properties, the same commands are used as for tag searches (see +@ref{Tags}). The syntax for the search string is described in @ref{Matching Tags and Properties}. + +@node Dates and Times +@chapter Dates and Times + +To assist project planning, TODO items can be labeled with a date +and/or a time. The specially formatted string carrying the date and +time information is called a @emph{timestamp} in Org mode. + +@menu +* Timestamps:: Assigning a time to a tree entry. +* Creating Timestamps:: Commands that insert timestamps. +* Deadlines and Scheduling:: Planning your work. +* Clocking Work Time:: Tracking how long you spent on a task. +@end menu + +@node Timestamps +@section Timestamps + +A timestamp is a specification of a date---possibly with a time or +a range of times---in a special format, either @samp{<2003-09-16 Tue>} or +@samp{<2003-09-16 Tue 09:39>} or @samp{<2003-09-16 Tue 12:00-12:30>}. +A timestamp can appear anywhere in the headline or body of an Org tree +entry. Its presence causes entries to be shown on specific dates in +the agenda (see [BROKEN LINK: *The Weekly/daily Agenda]). We distinguish: + +@table @asis +@item Plain timestamp; Event; Appointment +A simple timestamp just assigns a date/time to an item. This is +just like writing down an appointment or event in a paper agenda. + +@example +* Meet Peter at the movies + <2006-11-01 Wed 19:15> +* Discussion on climate change + <2006-11-02 Thu 20:00-22:00> +@end example + +@item Timestamp with repeater interval +A timestamp may contain a @emph{repeater interval}, indicating that it +applies not only on the given date, but again and again after +a certain interval of N days (d), weeks (w), months (m), or years +(y). The following shows up in the agenda every Wednesday: + +@example +* Pick up Sam at school + <2007-05-16 Wed 12:30 +1w> +@end example + +@item Diary-style expression entries +@cindex diary style timestamps +@cindex sexp timestamps +For more complex date specifications, Org mode supports using the +special expression diary entries implemented in the Emacs Calendar +package. For example, with optional time: + +@example +* 22:00-23:00 The nerd meeting on every 2nd Thursday of the month + <%%(diary-float t 4 2)> +@end example + +@item Time/Date range +Two timestamps connected by @samp{--} denote a range. + +@example +** Meeting in Amsterdam + <2004-08-23 Mon>--<2004-08-26 Thu> +@end example + +@item Inactive timestamp +Just like a plain timestamp, but with square brackets instead of +angular ones. These timestamps are inactive in the sense that they +do @emph{not} trigger an entry to show up in the agenda. + +@example +* Gillian comes late for the fifth time + [2006-11-01 Wed] +@end example +@end table + +@node Creating Timestamps +@section Creating Timestamps + +For Org mode to recognize timestamps, they need to be in the specific +format. All commands listed below produce timestamps in the correct +format. + +@table @asis +@item @kbd{C-c .} +Prompt for a date and insert a corresponding timestamp. When point +is at an existing timestamp in the buffer, the command is used to +modify this timestamp instead of inserting a new one. When this +command is used twice in succession, a time range is inserted. With +a prefix argument, it also adds the current time. + +@item @kbd{C-c !} +Like @kbd{C-c .}, but insert an inactive timestamp that does +not cause an agenda entry. + +@item @kbd{S-@key{LEFT}} +@itemx @kbd{S-@key{RIGHT}} +Change date at point by one day. + +@item @kbd{S-@key{UP}} +@itemx @kbd{S-@key{DOWN}} +On the beginning or enclosing bracket of a timestamp, change its +type. Within a timestamp, change the item under point. Point can +be on a year, month, day, hour or minute. When the timestamp +contains a time range like @samp{15:30-16:30}, modifying the first time +also shifts the second, shifting the time block with constant +length. To change the length, modify the second time. +@end table + + +When Org mode prompts for a date/time, it accepts any string +containing some date and/or time information, and intelligently +interprets the string, deriving defaults for unspecified information +from the current date and time. You can also select a date in the +pop-up calendar. See the manual for more information on how exactly +the date/time prompt works. + +@node Deadlines and Scheduling +@section Deadlines and Scheduling + +A timestamp may be preceded by special keywords to facilitate +planning: + +@table @asis +@item @kbd{C-c C-d} +Insert @samp{DEADLINE} keyword along with a time stamp, in the line +following the headline. + +Meaning: the task---most likely a TODO item, though not +necessarily---is supposed to be finished on that date. + +On the deadline date, the task is listed in the agenda. In +addition, the agenda for @emph{today} carries a warning about the +approaching or missed deadline, starting @code{org-deadline-warning-days} +before the due date, and continuing until the entry is marked as +done. An example: + +@example +*** TODO write article about the Earth for the Guide + DEADLINE: <2004-02-29 Sun> + The editor in charge is [[bbdb:Ford Prefect]] +@end example + +@item @kbd{C-c C-s} +Insert @samp{SCHEDULED} keyword along with a stamp, in the line following +the headline. + +Meaning: you are planning to start working on that task on the given +date@footnote{This is quite different from what is normally understood by +@emph{scheduling a meeting}, which is done in Org by just inserting a time +stamp without keyword.}. + +The headline is listed under the given date@footnote{It will still be listed on that date after it has been marked +as done. If you do not like this, set the variable +@code{org-agenda-skip-scheduled-if-done}.}. In addition, +a reminder that the scheduled date has passed is present in the +compilation for @emph{today}, until the entry is marked as done, i.e., +the task is automatically forwarded until completed. + +@example +*** TODO Call Trillian for a date on New Years Eve. + SCHEDULED: <2004-12-25 Sat> +@end example +@end table + +Some tasks need to be repeated again and again. Org mode helps to +organize such tasks using a so-called repeater in a @samp{DEADLINE}, +@samp{SCHEDULED}, or plain timestamps. In the following example: + +@example +** TODO Pay the rent + DEADLINE: <2005-10-01 Sat +1m> +@end example + +@noindent +the @samp{+1m} is a repeater; the intended interpretation is that the task +has a deadline on @samp{<2005-10-01>} and repeats itself every (one) month +starting from that time. + +@node Clocking Work Time +@section Clocking Work Time + +Org mode allows you to clock the time you spend on specific tasks in +a project. + +@table @asis +@item @kbd{C-c C-x C-i} +Start the clock on the current item (clock-in). This inserts the +@samp{CLOCK} keyword together with a timestamp. When called with +a @kbd{C-u} prefix argument, select the task from a list of +recently clocked tasks. + +@item @kbd{C-c C-x C-o} +Stop the clock (clock-out). This inserts another timestamp at the +same location where the clock was last started. It also directly +computes the resulting time in inserts it after the time range as +@samp{=>HH:MM}. + +@item @kbd{C-c C-x C-e} +Update the effort estimate for the current clock task. + +@item @kbd{C-c C-x C-q} +Cancel the current clock. This is useful if a clock was started by +mistake, or if you ended up working on something else. + +@item @kbd{C-c C-x C-j} +Jump to the headline of the currently clocked in task. With +a @kbd{C-u} prefix argument, select the target task from a list +of recently clocked tasks. +@end table + +The @kbd{l} key may be used in the agenda (see [BROKEN LINK: *The Weekly/daily Agenda]) to show which tasks have been worked on or closed during +a day. + +@node Capture Refile Archive +@chapter Capture, Refile, Archive + +An important part of any organization system is the ability to quickly +capture new ideas and tasks, and to associate reference material with +them. Org does this using a process called @emph{capture}. It also can +store files related to a task (@emph{attachments}) in a special directory. +Once in the system, tasks and projects need to be moved around. +Moving completed project trees to an archive file keeps the system +compact and fast. + +@menu +* Capture:: Capturing new stuff. +* Refile and Copy:: Moving/copying a tree from one place to another. +* Archiving:: What to do with finished products. +@end menu + +@node Capture +@section Capture + +Capture lets you quickly store notes with little interruption of your +work flow. You can define templates for new entries and associate +them with different targets for storing notes. + +@anchor{Setting up capture} +@subheading Setting up capture + +The following customization sets a default target@footnote{Using capture templates, you get finer control over capture +locations. See @ref{Capture templates}.} file for notes. + +@lisp +(setq org-default-notes-file (concat org-directory "/notes.org")) +@end lisp + +You may also define a global key for capturing new material (see +@ref{Activation}). + +@anchor{Using capture} +@subheading Using capture + +@table @asis +@item @kbd{M-x org-capture} +Start a capture process, placing you into a narrowed indirect buffer +to edit. + +@item @kbd{C-c C-c} +Once you have finished entering information into the capture buffer, +@kbd{C-c C-c} returns you to the window configuration before +the capture process, so that you can resume your work without +further distraction. + +@item @kbd{C-c C-w} +Finalize the capture process by refiling the note to a different +place (see @ref{Refile and Copy}). + +@item @kbd{C-c C-k} +Abort the capture process and return to the previous state. +@end table + +@anchor{Capture templates} +@subheading Capture templates + +You can use templates for different types of capture items, and for +different target locations. Say you would like to use one template to +create general TODO entries, and you want to put these entries under +the heading @samp{Tasks} in your file @samp{~/org/gtd.org}. Also, a date tree +in the file @samp{journal.org} should capture journal entries. A possible +configuration would look like: + +@lisp +(setq org-capture-templates + '(("t" "Todo" entry (file+headline "~/org/gtd.org" "Tasks") + "* TODO %?\n %i\n %a") + ("j" "Journal" entry (file+datetree "~/org/journal.org") + "* %?\nEntered on %U\n %i\n %a"))) +@end lisp + +If you then press @kbd{t} from the capture menu, Org will prepare +the template for you like this: + +@example +* TODO + [[file:LINK TO WHERE YOU INITIATED CAPTURE]] +@end example + + +@noindent +During expansion of the template, special %-escapes@footnote{If you need one of these sequences literally, escape the @samp{%} +with a backslash.} allow +dynamic insertion of content. Here is a small selection of the +possibilities, consult the manual for more. + +@multitable {aaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{%a} +@tab annotation, normally the link created with @code{org-store-link} +@item @samp{%i} +@tab initial content, the region when capture is called with @kbd{C-u} +@item @samp{%t}, @samp{%T} +@tab timestamp, date only, or date and time +@item @samp{%u}, @samp{%U} +@tab like above, but inactive timestamps +@item @samp{%?} +@tab after completing the template, position point here +@end multitable + +@node Refile and Copy +@section Refile and Copy + +When reviewing the captured data, you may want to refile or to copy +some of the entries into a different list, for example into a project. +Cutting, finding the right location, and then pasting the note is +cumbersome. To simplify this process, you can use the following +special command: + +@table @asis +@item @kbd{C-c C-w} +Refile the entry or region at point. This command offers possible +locations for refiling the entry and lets you select one with +completion. The item (or all items in the region) is filed below +the target heading as a subitem. + +By default, all level 1 headlines in the current buffer are +considered to be targets, but you can have more complex definitions +across a number of files. See the variable @code{org-refile-targets} for +details. + +@item @kbd{C-u C-c C-w} +Use the refile interface to jump to a heading. + +@item @kbd{C-u C-u C-c C-w} +Jump to the location where @code{org-refile} last moved a tree to. + +@item @kbd{C-c M-w} +Copying works like refiling, except that the original note is not +deleted. +@end table + +@node Archiving +@section Archiving + +When a project represented by a (sub)tree is finished, you may want to +move the tree out of the way and to stop it from contributing to the +agenda. Archiving is important to keep your working files compact and +global searches like the construction of agenda views fast. + +The most common archiving action is to move a project tree to another +file, the archive file. + +@table @asis +@item @kbd{C-c C-x C-a} +Archive the current entry using the command specified in the +variable @code{org-archive-default-command}. + +@item @kbd{C-c C-x C-s} or short @kbd{C-c $} +Archive the subtree starting at point position to the location given +by @code{org-archive-location}. +@end table + +The default archive location is a file in the same directory as the +current file, with the name derived by appending @samp{_archive} to the +current file name. You can also choose what heading to file archived +items under, with the possibility to add them to a datetree in a file. +For information and examples on how to specify the file and the +heading, see the documentation string of the variable +@code{org-archive-location}. + +There is also an in-buffer option for setting this variable, for +example: + +@example +#+ARCHIVE: %s_done:: +@end example + +@node Agenda Views +@chapter Agenda Views + +Due to the way Org works, TODO items, time-stamped items, and tagged +headlines can be scattered throughout a file or even a number of +files. To get an overview of open action items, or of events that are +important for a particular date, this information must be collected, +sorted and displayed in an organized way. + +The extracted information is displayed in a special @emph{agenda buffer}. +This buffer is read-only, but provides commands to visit the +corresponding locations in the original Org files, and even to edit +these files remotely. Remote editing from the agenda buffer means, +for example, that you can change the dates of deadlines and +appointments from the agenda buffer. For commands available in the +Agenda buffer, see @ref{Agenda Commands}. + +@menu +* Agenda Files:: Files being searched for agenda information. +* Agenda Dispatcher:: Keyboard access to agenda views. +* Built-in Agenda Views:: What is available out of the box? +* Global TODO List:: All unfinished action items. +* Matching Tags and Properties:: Structured information with fine-tuned search. +* Search View:: Find entries by searching for text. +* Agenda Commands:: Remote editing of Org trees. +* Custom Agenda Views:: Defining special searches and views. +@end menu + +@node Agenda Files +@section Agenda Files + +The information to be shown is normally collected from all @emph{agenda +files}, the files listed in the variable @code{org-agenda-files}. + +@table @asis +@item @kbd{C-c [} +Add current file to the list of agenda files. The file is added to +the front of the list. If it was already in the list, it is moved +to the front. With a prefix argument, file is added/moved to the +end. + +@item @kbd{C-c ]} +Remove current file from the list of agenda files. + +@item @kbd{C-'} +@itemx @kbd{C-,} +Cycle through agenda file list, visiting one file after the other. +@end table + +@node Agenda Dispatcher +@section The Agenda Dispatcher + +The views are created through a dispatcher, accessible with @kbd{M-x org-agenda}, or, better, bound to a global key (see @ref{Activation}). +It displays a menu from which an additional letter is required to +execute a command. The dispatcher offers the following default +commands: + +@table @asis +@item @kbd{a} +Create the calendar-like agenda (see [BROKEN LINK: *The Weekly/daily Agenda]). + +@item @kbd{t} +@itemx @kbd{T} +Create a list of all TODO items (see @ref{Global TODO List}). + +@item @kbd{m} +@itemx @kbd{M} +Create a list of headlines matching a given expression (see +@ref{Matching Tags and Properties}). + +@item @kbd{s} +@kindex s @r{(Agenda dispatcher)} +Create a list of entries selected by a boolean expression of +keywords and/or regular expressions that must or must not occur in +the entry. +@end table + +@node Built-in Agenda Views +@section The Weekly/Daily Agenda + +The purpose of the weekly/daily @emph{agenda} is to act like a page of +a paper agenda, showing all the tasks for the current week or day. + +@table @asis +@item @kbd{M-x org-agenda a} +Compile an agenda for the current week from a list of Org files. +The agenda shows the entries for each day. +@end table + +Org mode understands the syntax of the diary and allows you to use +diary expression entries directly in Org files: + +@example +* Holidays + :PROPERTIES: + :CATEGORY: Holiday + :END: +%%(org-calendar-holiday) ; special function for holiday names + +* Birthdays + :PROPERTIES: + :CATEGORY: Ann + :END: +%%(org-anniversary 1956 5 14) Arthur Dent is %d years old +%%(org-anniversary 1869 10 2) Mahatma Gandhi would be %d years old +@end example + +Org can interact with Emacs appointments notification facility. To +add the appointments of your agenda files, use the command +@code{org-agenda-to-appt}. + +@node Global TODO List +@section The Global TODO List + +The global TODO list contains all unfinished TODO items formatted and +collected into a single place. Remote editing of TODO items lets you +can change the state of a TODO entry with a single key press. For +commands available in the TODO list, see @ref{Agenda Commands}. + +@table @asis +@item @kbd{M-x org-agenda t} +Show the global TODO list. This collects the TODO items from all +agenda files (see @ref{Agenda Views}) into a single buffer. + +@item @kbd{M-x org-agenda T} +Like the above, but allows selection of a specific TODO keyword. +@end table + +@node Matching Tags and Properties +@section Matching Tags and Properties + +If headlines in the agenda files are marked with @emph{tags} (see @ref{Tags}), +or have properties (see @ref{Properties}), you can select headlines based +on this metadata and collect them into an agenda buffer. The match +syntax described here also applies when creating sparse trees with +@kbd{C-c / m}. + +@table @asis +@item @kbd{M-x org-agenda m} +Produce a list of all headlines that match a given set of tags. The +command prompts for a selection criterion, which is a boolean logic +expression with tags, like @samp{+work+urgent-withboss} or @samp{work|home} +(see @ref{Tags}). If you often need a specific search, define a custom +command for it (see @ref{Agenda Dispatcher}). + +@item @kbd{M-x org-agenda M} +Like @kbd{m}, but only select headlines that are also TODO +items. +@end table + +A search string can use Boolean operators @samp{&} for AND and @samp{|} for OR@. +@samp{&} binds more strongly than @samp{|}. Parentheses are currently not +implemented. Each element in the search is either a tag, a regular +expression matching tags, or an expression like @samp{PROPERTY OPERATOR +VALUE} with a comparison operator, accessing a property value. Each +element may be preceded by @samp{-} to select against it, and @samp{+} is +syntactic sugar for positive selection. The AND operator @samp{&} is +optional when @samp{+} or @samp{-} is present. Here are some examples, using +only tags. + +@table @asis +@item @samp{+work-boss} +Select headlines tagged @samp{work}, but discard those also tagged +@samp{boss}. + +@item @samp{work|laptop} +Selects lines tagged @samp{work} or @samp{laptop}. + +@item @samp{work|laptop+night} +Like before, but require the @samp{laptop} lines to be tagged also +@samp{night}. +@end table + +You may also test for properties at the same time as matching tags, +see the manual for more information. + +@node Search View +@section Search View + +This agenda view is a general text search facility for Org mode +entries. It is particularly useful to find notes. + +@table @asis +@item @kbd{M-x org-agenda s} (@code{org-search-view}) +@kindex s @r{(Agenda dispatcher)} +@findex org-search-view +This is a special search that lets you select entries by matching +a substring or specific words using a boolean logic. +@end table + +For example, the search string @samp{computer equipment} matches entries +that contain @samp{computer equipment} as a substring. + +Search view can also search for specific keywords in the entry, using +Boolean logic. The search string @samp{+computer ++wifi -ethernet -@{8\.11[bg]@}} matches note entries that contain the +keywords @samp{computer} and @samp{wifi}, but not the keyword @samp{ethernet}, and +which are also not matched by the regular expression @samp{8\.11[bg]}, +meaning to exclude both @samp{8.11b} and @samp{8.11g}. + +Note that in addition to the agenda files, this command also searches +the files listed in @code{org-agenda-text-search-extra-files}. + +@node Agenda Commands +@section Commands in the Agenda Buffer + +Entries in the agenda buffer are linked back to the Org file or diary +file where they originate. You are not allowed to edit the agenda +buffer itself, but commands are provided to show and jump to the +original entry location, and to edit the Org files ``remotely'' from the +agenda buffer. This is just a selection of the many commands, explore +the agenda menu and the manual for a complete list. + +@anchor{Motion (1)} +@subheading Motion + +@table @asis +@item @kbd{n} +Next line (same as @kbd{@key{DOWN}} and @kbd{C-n}). + +@item @kbd{p} +Previous line (same as @kbd{@key{UP}} and @kbd{C-p}). +@end table + +@anchor{View/Go to Org file} +@subheading View/Go to Org file + +@table @asis +@item @kbd{@key{SPC}} +Display the original location of the item in another window. +With a prefix argument, make sure that drawers stay folded. + +@item @kbd{@key{TAB}} +Go to the original location of the item in another window. + +@item @kbd{@key{RET}} +Go to the original location of the item and delete other windows. +@end table + +@anchor{Change display} +@subheading Change display + +@table @asis +@item @kbd{o} +Delete other windows. + +@item @kbd{v d} or short @kbd{d} +Switch to day view. + +@item @kbd{v w} or short @kbd{w} +Switch to week view. + +@item @kbd{f} +Go forward in time to display the span following the current one. +For example, if the display covers a week, switch to the following +week. + +@item @kbd{b} +Go backward in time to display earlier dates. + +@item @kbd{.} +Go to today. + +@item @kbd{j} +Prompt for a date and go there. + +@item @kbd{v l} or @kbd{v L} or short @kbd{l} +Toggle Logbook mode. In Logbook mode, entries that were marked as +done while logging was on (see the variable @code{org-log-done}) are +shown in the agenda, as are entries that have been clocked on that +day. When called with a @kbd{C-u} prefix argument, show all +possible logbook entries, including state changes. + +@item @kbd{r} +@itemx @kbd{g} +Recreate the agenda buffer, for example to reflect the changes after +modification of the timestamps of items. + +@item @kbd{s} +@kindex C-x C-s +@findex org-save-all-org-buffers +@kindex s +Save all Org buffers in the current Emacs session, and also the +locations of IDs. +@end table + +@anchor{Remote editing} +@subheading Remote editing + +@table @asis +@item @kbd{0--9} +Digit argument. + +@item @kbd{t} +Change the TODO state of the item, both in the agenda and in the +original Org file. + +@item @kbd{C-k} +Delete the current agenda item along with the entire subtree +belonging to it in the original Org file. + +@item @kbd{C-c C-w} +Refile the entry at point. + +@item @kbd{a} +Archive the subtree corresponding to the entry at point using the +default archiving command set in @code{org-archive-default-command}. + +@item @kbd{$} +Archive the subtree corresponding to the current headline. + +@item @kbd{C-c C-s} +Schedule this item. With a prefix argument, remove the +scheduling timestamp + +@item @kbd{C-c C-d} +Set a deadline for this item. With a prefix argument, remove the +deadline. + +@item @kbd{S-@key{RIGHT}} +Change the timestamp associated with the current line by one day +into the future. + +@item @kbd{S-@key{LEFT}} +Change the timestamp associated with the current line by one day +into the past. + +@item @kbd{I} +Start the clock on the current item. + +@item @kbd{O} +Stop the previously started clock. + +@item @kbd{X} +Cancel the currently running clock. + +@item @kbd{J} +Jump to the running clock in another window. +@end table + +@anchor{Quit and exit} +@subheading Quit and exit + +@table @asis +@item @kbd{q} +Quit agenda, remove the agenda buffer. + +@item @kbd{x} +Exit agenda, remove the agenda buffer and all buffers loaded by +Emacs for the compilation of the agenda. +@end table + +@node Custom Agenda Views +@section Custom Agenda Views + +The first application of custom searches is the definition of keyboard +shortcuts for frequently used searches, either creating an agenda +buffer, or a sparse tree (the latter covering of course only the +current buffer). + +Custom commands are configured in the variable +@code{org-agenda-custom-commands}. You can customize this variable, for +example by pressing @kbd{C} from the agenda dispatcher (see @ref{Agenda Dispatcher}). You can also directly set it with Emacs Lisp in +the Emacs init file. The following example contains all valid agenda +views: + +@lisp +(setq org-agenda-custom-commands + '(("w" todo "WAITING") + ("u" tags "+boss-urgent") + ("v" tags-todo "+boss-urgent"))) +@end lisp + +The initial string in each entry defines the keys you have to press +after the dispatcher command in order to access the command. Usually +this is just a single character. The second parameter is the search +type, followed by the string or regular expression to be used for the +matching. The example above will therefore define: + +@table @asis +@item @kbd{w} +as a global search for TODO entries with @samp{WAITING} as the TODO +keyword. + +@item @kbd{u} +as a global tags search for headlines tagged @samp{boss} but not +@samp{urgent}. + +@item @kbd{v} +The same search, but limiting it to headlines that are also TODO +items. +@end table + +@node Markup +@chapter Markup for Rich Contents + +Org is primarily about organizing and searching through your +plain-text notes. However, it also provides a lightweight yet robust +markup language for rich text formatting and more. Used in +conjunction with the export framework (see @ref{Exporting}), you can author +beautiful documents in Org. + +@menu +* Paragraphs:: The basic unit of text. +* Emphasis and Monospace:: Bold, italic, etc. +* Embedded @LaTeX{}:: LaTeX can be freely used inside Org documents. +* Literal examples:: Source code examples with special formatting. +* Images:: Display an image. +* Creating Footnotes:: Edit and read footnotes. +@end menu + +@node Paragraphs +@section Paragraphs + +Paragraphs are separated by at least one empty line. If you need to +enforce a line break within a paragraph, use @samp{\\} at the end of +a line. + +To preserve the line breaks, indentation and blank lines in a region, +but otherwise use normal formatting, you can use this construct, which +can also be used to format poetry. + +@example +#+BEGIN_VERSE + Great clouds overhead + Tiny black birds rise and fall + Snow covers Emacs + + ---AlexSchroeder +#+END_VERSE +@end example + +When quoting a passage from another document, it is customary to +format this as a paragraph that is indented on both the left and the +right margin. You can include quotations in Org documents like this: + +@example +#+BEGIN_QUOTE +Everything should be made as simple as possible, +but not any simpler ---Albert Einstein +#+END_QUOTE +@end example + +If you would like to center some text, do it like this: + +@example +#+BEGIN_CENTER +Everything should be made as simple as possible, \\ +but not any simpler +#+END_CENTER +@end example + +@node Emphasis and Monospace +@section Emphasis and Monospace + +You can make words @samp{*bold*}, @samp{/italic/}, @samp{_underlined_}, @samp{=verbatim=} +and @samp{~code~}, and, if you must, @samp{+strike-through+}. Text in the code +and verbatim string is not processed for Org specific syntax; it is +exported verbatim. + +@node Embedded @LaTeX{} +@section Embedded @LaTeX{} + +For scientific notes which need to be able to contain mathematical +symbols and the occasional formula, Org mode supports embedding @LaTeX{} +code into its files. You can directly use @TeX{}-like syntax for special +symbols, enter formulas and entire @LaTeX{} environments. + +@example +The radius of the sun is R_sun = 6.96 x 10^8 m. On the other hand, +the radius of Alpha Centauri is R_@{Alpha Centauri@} = 1.28 x R_@{sun@}. + +\begin@{equation@} % arbitrary environments, +x=\sqrt@{b@} % even tables, figures +\end@{equation@} % etc + +If $a^2=b$ and \( b=2 \), then the solution must be +either $$ a=+\sqrt@{2@} $$ or \[ a=-\sqrt@{2@} \]. +@end example + +@node Literal examples +@section Literal examples + +You can include literal examples that should not be subjected to +markup. Such examples are typeset in monospace, so this is well +suited for source code and similar examples. + +@example +#+BEGIN_EXAMPLE + Some example from a text file. +#+END_EXAMPLE +@end example + +For simplicity when using small examples, you can also start the +example lines with a colon followed by a space. There may also be +additional whitespace before the colon: + +@example +Here is an example + : Some example from a text file. +@end example + +If the example is source code from a programming language, or any +other text that can be marked up by Font Lock in Emacs, you can ask +for the example to look like the fontified Emacs buffer. + +@example +#+BEGIN_SRC emacs-lisp + (defun org-xor (a b) + "Exclusive or." + (if a (not b) b)) + #+END_SRC +@end example + +To edit the example in a special buffer supporting this language, use +@kbd{C-c '} to both enter and leave the editing buffer. + +@node Images +@section Images + +An image is a link to an image file that does not have a description +part, for example + +@example +./img/cat.jpg +@end example + + +If you wish to define a caption for the image and maybe a label for +internal cross references (see @ref{Hyperlinks}), make sure that the +link is on a line by itself and precede it with @samp{CAPTION} and @samp{NAME} +keywords as follows: + +@example +#+CAPTION: This is the caption for the next figure link (or table) +#+NAME: fig:SED-HR4049 +[[./img/a.jpg]] +@end example + +@node Creating Footnotes +@section Creating Footnotes + +A footnote is defined in a paragraph that is started by a footnote +marker in square brackets in column 0, no indentation allowed. The +footnote reference is simply the marker in square brackets, inside +text. For example: + +@example +The Org homepage[fn:1] now looks a lot better than it used to. +... +[fn:1] The link is: https://orgmode.org +@end example + +The following commands handle footnotes: + +@table @asis +@item @kbd{C-c C-x f} +The footnote action command. When point is on a footnote reference, +jump to the definition. When it is at a definition, jump to the +(first) reference. Otherwise, create a new footnote. When this +command is called with a prefix argument, a menu of additional +options including renumbering is offered. + +@item @kbd{C-c C-c} +Jump between definition and reference. +@end table + +@node Exporting +@chapter Exporting + +Org can convert and export documents to a variety of other formats +while retaining as much structure (see @ref{Document Structure}) and markup +(see @ref{Markup}) as possible. + +@menu +* The Export Dispatcher:: The main interface. +* Export Settings:: Common export settings. +* Table of Contents:: The if and where of the table of contents. +* Include Files:: Include additional files into a document. +* Comment Lines:: What will not be exported. +* ASCII/UTF-8 Export:: Exporting to flat files with encoding. +* HTML Export:: Exporting to HTML. +* @LaTeX{} Export:: Exporting to @LaTeX{} and processing to PDF. +* iCalendar Export:: Exporting to iCalendar. +@end menu + +@node The Export Dispatcher +@section The Export Dispatcher + +The export dispatcher is the main interface for Org's exports. +A hierarchical menu presents the currently configured export formats. +Options are shown as easy toggle switches on the same screen. + +@table @asis +@item @kbd{C-c C-e} +Invokes the export dispatcher interface. +@end table + +Org exports the entire buffer by default. If the Org buffer has an +active region, then Org exports just that region. + +@node Export Settings +@section Export Settings + +The exporter recognizes special lines in the buffer which provide +additional information. These lines may be put anywhere in the file: + +@example +#+TITLE: I'm in the Mood for Org +@end example + + +Most proeminent export options include: + +@multitable {aaaaaaaaaa} {aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa} +@item @samp{TITLE} +@tab the title to be shown +@item @samp{AUTHOR} +@tab the author (default taken from @code{user-full-name}) +@item @samp{DATE} +@tab a date, fixed, or an Org timestamp +@item @samp{EMAIL} +@tab email address (default from @code{user-mail-address}) +@item @samp{LANGUAGE} +@tab language code, e.g., @samp{en} +@end multitable + +Option keyword sets can be inserted from the export dispatcher (see +@ref{The Export Dispatcher}) using the @samp{Insert template} command by +pressing @kbd{#}. + +@node Table of Contents +@section Table of Contents + +The table of contents includes all headlines in the document. Its +depth is therefore the same as the headline levels in the file. If +you need to use a different depth, or turn it off entirely, set the +@code{org-export-with-toc} variable accordingly. You can achieve the same +on a per file basis, using the following @samp{toc} item in @samp{OPTIONS} +keyword: + +@example +#+OPTIONS: toc:2 (only include two levels in TOC) +#+OPTIONS: toc:nil (no default TOC at all) +@end example + +Org normally inserts the table of contents directly before the first +headline of the file. + +@node Include Files +@section Include Files + +During export, you can include the content of another file. For +example, to include your @samp{.emacs} file, you could use: + +@example +#+INCLUDE: "~/.emacs" src emacs-lisp +@end example + + +@noindent +The first parameter is the file name to include. The optional second +parameter specifies the block type: @samp{example}, @samp{export} or @samp{src}. The +optional third parameter specifies the source code language to use for +formatting the contents. This is relevant to both @samp{export} and @samp{src} +block types. + +You can visit the included file with @kbd{C-c '}. + +@node Comment Lines +@section Comment Lines + +Lines starting with zero or more whitespace characters followed by one +@samp{#} and a whitespace are treated as comments and, as such, are not +exported. + +Likewise, regions surrounded by @samp{#+BEGIN_COMMENT} @dots{} @samp{#+END_COMMENT} +are not exported. + +Finally, a @samp{COMMENT} keyword at the beginning of an entry, but after +any other keyword or priority cookie, comments out the entire subtree. +The command below helps changing the comment status of a headline. + +@table @asis +@item @kbd{C-c ;} +Toggle the @samp{COMMENT} keyword at the beginning of an entry. +@end table + +@node ASCII/UTF-8 Export +@section ASCII/UTF-8 Export + +ASCII export produces an output file containing only plain ASCII +characters. This is the simplest and most direct text output. It +does not contain any Org markup. UTF-8 export uses additional +characters and symbols available in this encoding standards. + +@table @asis +@item @kbd{C-c C-e t a} +@itemx @kbd{C-c C-e t u} +Export as an ASCII file with a @samp{.txt} extension. For @samp{myfile.org}, +Org exports to @samp{myfile.txt}, overwriting without warning. For +@samp{myfile.txt}, Org exports to @samp{myfile.txt.txt} in order to prevent +data loss. +@end table + +@node HTML Export +@section HTML Export + +Org mode contains an HTML exporter with extensive HTML formatting +compatible with XHTML 1.0 strict standard. + +@table @asis +@item @kbd{C-c C-e h h} +Export as HTML file with a @samp{.html} extension. For @samp{myfile.org}, Org +exports to @samp{myfile.html}, overwriting without warning. @kbd{C-c C-e h o} exports to HTML and opens it in a web browser. +@end table + +The HTML export back-end transforms @samp{<} and @samp{>} to @samp{<} and @samp{>}. +To include raw HTML code in the Org file so the HTML export back-end +can insert that HTML code in the output, use this inline syntax: +@samp{@@@@html:...@@@@}. For example: + +@example +@@@@html:@@@@bold text@@@@html:@@@@ +@end example + + +For larger raw HTML code blocks, use these HTML export code blocks: + +@example +#+HTML: Literal HTML code for export + +#+BEGIN_EXPORT html + All lines between these markers are exported literally +#+END_EXPORT +@end example + +@node @LaTeX{} Export +@section @LaTeX{} Export + +The @LaTeX{} export back-end can handle complex documents, incorporate +standard or custom @LaTeX{} document classes, generate documents using +alternate @LaTeX{} engines, and produce fully linked PDF files with +indexes, bibliographies, and tables of contents, destined for +interactive online viewing or high-quality print publication. + +By default, the @LaTeX{} output uses the @emph{article} class. You can change +this by adding an option like @samp{#+LATEX_CLASS: myclass} in your file. +The class must be listed in @code{org-latex-classes}. + +@table @asis +@item @kbd{C-c C-e l l} +Export to a @LaTeX{} file with a @samp{.tex} extension. For @samp{myfile.org}, +Org exports to @samp{myfile.tex}, overwriting without warning. + +@item @kbd{C-c C-e l p} +Export as @LaTeX{} file and convert it to PDF file. + +@item @kbd{C-c C-e l o} +Export as @LaTeX{} file and convert it to PDF, then open the PDF using +the default viewer. +@end table + +The @LaTeX{} export back-end can insert any arbitrary @LaTeX{} code, see +@ref{Embedded @LaTeX{}}. There are three ways to embed such code in the Org +file and they all use different quoting syntax. + +Inserting in-line quoted with @@ symbols: + +@example +Code embedded in-line @@@@latex:any arbitrary LaTeX code@@@@ in a paragraph. +@end example + + +Inserting as one or more keyword lines in the Org file: + +@example +#+LATEX: any arbitrary LaTeX code +@end example + + +Inserting as an export block in the Org file, where the back-end +exports any code between begin and end markers: + +@example +#+BEGIN_EXPORT latex + any arbitrary LaTeX code +#+END_EXPORT +@end example + +@node iCalendar Export +@section iCalendar Export + +A large part of Org mode's interoperability success is its ability to +easily export to or import from external applications. The iCalendar +export back-end takes calendar data from Org files and exports to the +standard iCalendar format. + +@table @asis +@item @kbd{C-c C-e c f} +Create iCalendar entries from the current Org buffer and store them +in the same directory, using a file extension @samp{.ics}. + +@item @kbd{C-c C-e c c} +Create a combined iCalendar file from Org files in +@code{org-agenda-files} and write it to +@code{org-icalendar-combined-agenda-file} file name. +@end table + +@node Publishing +@chapter Publishing + +Org includes a publishing management system that allows you to +configure automatic HTML conversion of @emph{projects} composed of +interlinked Org files. You can also configure Org to automatically +upload your exported HTML pages and related attachments, such as +images and source code files, to a web server. + +You can also use Org to convert files into PDF, or even combine HTML +and PDF conversion so that files are available in both formats on the +server. + +For detailed instructions about setup, see the manual. Here is an +example: + +@lisp +(setq org-publish-project-alist + '(("org" + :base-directory "~/org/" + :publishing-function org-html-publish-to-html + :publishing-directory "~/public_html" + :section-numbers nil + :with-toc nil + :html-head ""))) +@end lisp + +@table @asis +@item @kbd{C-c C-e P x} +Prompt for a specific project and publish all files that belong to +it. + +@item @kbd{C-c C-e P p} +Publish the project containing the current file. + +@item @kbd{C-c C-e P f} +Publish only the current file. + +@item @kbd{C-c C-e P a} +Publish every project. +@end table + +Org uses timestamps to track when a file has changed. The above +functions normally only publish changed files. You can override this +and force publishing of all files by giving a prefix argument to any +of the commands above. + +@node Working with Source Code +@chapter Working with Source Code + +Org mode provides a number of features for working with source code, +including editing of code blocks in their native major mode, +evaluation of code blocks, tangling of code blocks, and exporting code +blocks and their results in several formats. + +A source code block conforms to this structure: + +@example +#+NAME: +#+BEGIN_SRC
+ +#+END_SRC +@end example + +@noindent +where: + +@itemize +@item +@samp{} is a string used to uniquely name the code block, + +@item +@samp{} specifies the language of the code block, e.g., +@samp{emacs-lisp}, @samp{shell}, @samp{R}, @samp{python}, etc., + +@item +@samp{} can be used to control export of the code block, + +@item +@samp{
} can be used to control many aspects of code +block behavior as demonstrated below, + +@item +@samp{} contains the actual source code. +@end itemize + +Use @kbd{C-c '} to edit the current code block. It opens a new +major mode edit buffer containing the body of the source code block, +ready for any edits. Use @kbd{C-c '} again to close the buffer +and return to the Org buffer. + +@anchor{Using header arguments} +@heading Using header arguments + +A header argument is specified with an initial colon followed by the +argument's name in lowercase. + +Header arguments can be set in several ways; Org prioritizes them in +case of overlaps or conflicts by giving local settings a higher +priority. + +@table @asis +@item System-wide header arguments +Those are specified by customizing @code{org-babel-default-header-args} +variable, or, for a specific language @var{LANG} +@code{org-babel-default-header-args:LANG}. + +@item Header arguments in properties +You can set them using @samp{header-args} property (see @ref{Properties})---or +@samp{header-args:LANG} for language @var{LANG}. Header arguments +set through properties drawers apply at the sub-tree level on down. + +@item Header arguments in code blocks +Header arguments are most commonly set at the source code block +level, on the @samp{BEGIN_SRC} line: + +@example +#+NAME: factorial +#+BEGIN_SRC haskell :results silent :exports code :var n=0 + fac 0 = 1 + fac n = n * fac (n-1) +#+END_SRC +@end example + +Code block header arguments can span multiple lines using @samp{HEADER} +keyword on each line. +@end table + +@anchor{Evaluating code blocks} +@heading Evaluating code blocks + +Use @kbd{C-c C-c} to evaluate the current code block and insert +its results in the Org document. By default, evaluation is only +turned on for @samp{emacs-lisp} code blocks, however support exists for +evaluating blocks in many languages. For a complete list of supported +languages see the manual. The following shows a code block and its +results. + +@example +#+BEGIN_SRC emacs-lisp + (+ 1 2 3 4) +#+END_SRC + +#+RESULTS: +: 10 +@end example + +The following syntax is used to pass arguments to code blocks using +the @samp{var} header argument. + +@example +:var NAME=ASSIGN +@end example + + +@noindent +@var{NAME} is the name of the variable bound in the code block +body. @var{ASSIGN} is a literal value, such as a string, +a number, a reference to a table, a list, a literal example, another +code block---with or without arguments---or the results of evaluating +a code block. + +@anchor{Results of evaluation} +@heading Results of evaluation + +How Org handles results of a code block execution depends on many +header arguments working together. The primary determinant, however, +is the @samp{results} header argument. It controls the @emph{collection}, +@emph{type}, @emph{format}, and @emph{handling} of code block results. + +@table @asis +@item Collection +How the results should be collected from the code block. You may +choose either @samp{output} or @samp{value} (the default). + +@item Type +What result types to expect from the execution of the code block. +You may choose among @samp{table}, @samp{list}, @samp{scalar}, and @samp{file}. Org +tries to guess it if you do not provide it. + +@item Format +How Org processes results. Some possible values are @samp{code}, +@samp{drawer}, @samp{html}, @samp{latex}, @samp{link}, and @samp{raw}. + +@item Handling +How to insert the results once properly formatted. Allowed values +are @samp{silent}, @samp{replace} (the default), @samp{append}, or @samp{prepend}. +@end table + +Code blocks which output results to files---e.g.: graphs, diagrams and +figures---can accept a @samp{:file FILENAME} header argument, in which case +the results are saved to the named file, and a link to the file is +inserted into the buffer. + +@anchor{Exporting code blocks} +@heading Exporting code blocks + +It is possible to export the @emph{code} of code blocks, the @emph{results} of +code block evaluation, @emph{both} the code and the results of code block +evaluation, or @emph{none}. Org defaults to exporting @emph{code} for most +languages. + +The @samp{exports} header argument is to specify if that part of the Org +file is exported to, say, HTML or @LaTeX{} formats. It can be set to +either @samp{code}, @samp{results}, @samp{both} or @samp{none}. + +@anchor{Extracting source code} +@heading Extracting source code + +Use @kbd{C-c C-v t} to create pure source code files by +extracting code from source blocks in the current buffer. This is +referred to as ``tangling''---a term adopted from the literate +programming community. During tangling of code blocks their bodies +are expanded using @code{org-babel-expand-src-block}, which can expand both +variable and ``Noweb'' style references. In order to tangle a code +block it must have a @samp{tangle} header argument, see the manual for +details. + +@node Miscellaneous +@chapter Miscellaneous + + + +@anchor{Completion} +@heading Completion + +Org has in-buffer completions with @kbd{M-@key{TAB}}. No minibuffer is +involved. Type one or more letters and invoke the hot key to complete +the text in-place. + +For example, this command will complete @TeX{} symbols after @samp{\}, TODO +keywords at the beginning of a headline, and tags after @samp{:} in +a headline. + +@anchor{Structure Templates} +@heading Structure Templates + +To quickly insert empty structural blocks, such as @samp{#+BEGIN_SRC} +@dots{} @samp{#+END_SRC}, or to wrap existing text in such a block, use + +@table @asis +@item @kbd{C-c C-,} +Prompt for a type of block structure, and insert the block at point. +If the region is active, it is wrapped in the block. +@end table + +@anchor{Clean view} +@heading Clean view + +Org's default outline with stars and no indents can become too +cluttered for short documents. For @emph{book-like} long documents, the +effect is not as noticeable. Org provides an alternate stars and +indentation scheme, as shown on the right in the following table. It +uses only one star and indents text to line with the heading: + +@example +* Top level headline | * Top level headline +** Second level | * Second level +*** Third level | * Third level + some text | some text +*** Third level | * Third level + more text | more text +* Another top level headline | * Another top level headline +@end example + +This kind of view can be achieved dynamically at display time using +Org Indent mode (@kbd{M-x org-indent-mode @key{RET}}), which prepends +intangible space to each line. You can turn on Org Indent mode for +all files by customizing the variable @code{org-startup-indented}, or you +can turn it on for individual files using + +@example +#+STARTUP: indent +@end example + + +If you want the indentation to be hard space characters so that the +plain text file looks as similar as possible to the Emacs display, Org +supports you by helping to indent (with @kbd{@key{TAB}}) text below +each headline, by hiding leading stars, and by only using levels 1, 3, +etc to get two characters indentation for each level. To get this +support in a file, use + +@example +#+STARTUP: hidestars odd +@end example + +@bye \ No newline at end of file diff --git a/elpa/org-9.5.2/doc/pdflayout.sty b/elpa/org-9.5.2/doc/pdflayout.sty new file mode 100644 index 0000000..7fb6afd --- /dev/null +++ b/elpa/org-9.5.2/doc/pdflayout.sty @@ -0,0 +1,44 @@ +% Copyright (C) 2007-2013 Free Software Foundation, Inc. + +% This file is part of GNU Emacs. + +% GNU Emacs is free software: you can redistribute it and/or modify +% it under the terms of the GNU General Public License as published by +% the Free Software Foundation, either version 3 of the License, or +% (at your option) any later version. + +% GNU Emacs is distributed in the hope that it will be useful, +% but WITHOUT ANY WARRANTY; without even the implied warranty of +% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +% GNU General Public License for more details. + +% You should have received a copy of the GNU General Public License +% along with GNU Emacs. If not, see . + +% This file defines `\pdflayout': +% - \pdflayout=(0) is A4 portrait, +% - \pdflayout=(1) is letter (US) portrait, +% - \pdflayout=(0l) is A4 landscape. +% - \pdflayout=(1l) is letter (US) landscape, + +\input ifpdf.sty + +\ifpdf + \def\pdflayout=(#1#2){ + \if0#1 % A4 + \pdfpagewidth=21cm + \pdfpageheight=29.7cm + \else\if1#1 % Letter + \pdfpagewidth=8.5in + \pdfpageheight=11in + \letterpaper=1 + \fi\fi + \if l#2 % Landscape + \edef\oldwidth{\the\pdfpagewidth} + \pdfpagewidth=\pdfpageheight + \pdfpageheight=\oldwidth + \fi + } +\else + \def\pdflayout=(#1#2){} +\fi diff --git a/elpa/org-9.5.2/doc/texinfo.tex b/elpa/org-9.5.2/doc/texinfo.tex new file mode 100644 index 0000000..f3c25b9 --- /dev/null +++ b/elpa/org-9.5.2/doc/texinfo.tex @@ -0,0 +1,10145 @@ +% texinfo.tex -- TeX macros to handle Texinfo files. +% +% Load plain if necessary, i.e., if running under initex. +\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi +% +\def\texinfoversion{2013-09-11.11} +% +% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, +% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc. +% +% This texinfo.tex file is free software: you can redistribute it and/or +% modify it under the terms of the GNU General Public License as +% published by the Free Software Foundation, either version 3 of the +% License, or (at your option) any later version. +% +% This texinfo.tex file is distributed in the hope that it will be +% useful, but WITHOUT ANY WARRANTY; without even the implied warranty +% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +% General Public License for more details. +% +% You should have received a copy of the GNU General Public License +% along with this program. If not, see . +% +% As a special exception, when this file is read by TeX when processing +% a Texinfo source document, you may use the result without +% restriction. This Exception is an additional permission under section 7 +% of the GNU General Public License, version 3 ("GPLv3"). +% +% Please try the latest version of texinfo.tex before submitting bug +% reports; you can get the latest version from: +% https://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or +% https://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or +% https://www.gnu.org/software/texinfo/ (the Texinfo home page) +% The texinfo.tex in any given distribution could well be out +% of date, so if that's what you're using, please check. +% +% Send bug reports to bug-texinfo@gnu.org. Please include including a +% complete document in each bug report with which we can reproduce the +% problem. Patches are, of course, greatly appreciated. +% +% To process a Texinfo manual with TeX, it's most reliable to use the +% texi2dvi shell script that comes with the distribution. For a simple +% manual foo.texi, however, you can get away with this: +% tex foo.texi +% texindex foo.?? +% tex foo.texi +% tex foo.texi +% dvips foo.dvi -o # or whatever; this makes foo.ps. +% The extra TeX runs get the cross-reference information correct. +% Sometimes one run after texindex suffices, and sometimes you need more +% than two; texi2dvi does it as many times as necessary. +% +% It is possible to adapt texinfo.tex for other languages, to some +% extent. You can get the existing language-specific files from the +% full Texinfo distribution. +% +% The GNU Texinfo home page is https://www.gnu.org/software/texinfo. + + +\message{Loading texinfo [version \texinfoversion]:} + +% If in a .fmt file, print the version number +% and turn on active characters that we couldn't do earlier because +% they might have appeared in the input file name. +\everyjob{\message{[Texinfo version \texinfoversion]}% + \catcode`+=\active \catcode`\_=\active} + +\chardef\other=12 + +% We never want plain's \outer definition of \+ in Texinfo. +% For @tex, we can use \tabalign. +\let\+ = \relax + +% Save some plain tex macros whose names we will redefine. +\let\ptexb=\b +\let\ptexbullet=\bullet +\let\ptexc=\c +\let\ptexcomma=\, +\let\ptexdot=\. +\let\ptexdots=\dots +\let\ptexend=\end +\let\ptexequiv=\equiv +\let\ptexexclam=\! +\let\ptexfootnote=\footnote +\let\ptexgtr=> +\let\ptexhat=^ +\let\ptexi=\i +\let\ptexindent=\indent +\let\ptexinsert=\insert +\let\ptexlbrace=\{ +\let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent +\let\ptexplus=+ +\let\ptexraggedright=\raggedright +\let\ptexrbrace=\} +\let\ptexslash=\/ +\let\ptexstar=\* +\let\ptext=\t +\let\ptextop=\top +{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode + +% If this character appears in an error message or help string, it +% starts a new line in the output. +\newlinechar = `^^J + +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Pre-3.0. +\else + \def\linenumber{l.\the\inputlineno:\space} +\fi + +% Set up fixed words for English if not already set. +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi +\ifx\putworderror\undefined \gdef\putworderror{error}\fi +\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi +\ifx\putwordin\undefined \gdef\putwordin{in}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi +\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi +\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordof\undefined \gdef\putwordof{of}\fi +\ifx\putwordon\undefined \gdef\putwordon{on}\fi +\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi +\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi +\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi +\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi +\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +% +\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi +\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi +\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi +\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi +\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi +\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi +\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi +\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi +\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi +\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi +\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi +\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi +% +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi + +% Since the category of space is not known, we have to be careful. +\chardef\spacecat = 10 +\def\spaceisspace{\catcode`\ =\spacecat} + +% sometimes characters are active, so we need control sequences. +\chardef\ampChar = `\& +\chardef\colonChar = `\: +\chardef\commaChar = `\, +\chardef\dashChar = `\- +\chardef\dotChar = `\. +\chardef\exclamChar= `\! +\chardef\hashChar = `\# +\chardef\lquoteChar= `\` +\chardef\questChar = `\? +\chardef\rquoteChar= `\' +\chardef\semiChar = `\; +\chardef\slashChar = `\/ +\chardef\underChar = `\_ + +% Ignore a token. +% +\def\gobble#1{} + +% The following is used inside several \edef's. +\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} + +% Hyphenation fixes. +\hyphenation{ + Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script + ap-pen-dix bit-map bit-maps + data-base data-bases eshell fall-ing half-way long-est man-u-script + man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm + par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + spell-ing spell-ings + stand-alone strong-est time-stamp time-stamps which-ever white-space + wide-spread wrap-around +} + +% Margin to add to right of even pages, to left of odd pages. +\newdimen\bindingoffset +\newdimen\normaloffset +\newdimen\pagewidth \newdimen\pageheight + +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt } + +% Sometimes it is convenient to have everything in the transcript file +% and nothing on the terminal. We don't just call \tracingall here, +% since that produces some useless output on the terminal. We also make +% some effort to order the tracing commands to reduce output in the log +% file; cf. trace.sty in LaTeX. +% +\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% +\def\loggingall{% + \tracingstats2 + \tracingpages1 + \tracinglostchars2 % 2 gives us more in etex + \tracingparagraphs1 + \tracingoutput1 + \tracingmacros2 + \tracingrestores1 + \showboxbreadth\maxdimen \showboxdepth\maxdimen + \ifx\eTeXversion\thisisundefined\else % etex gives us more logging + \tracingscantokens1 + \tracingifs1 + \tracinggroups1 + \tracingnesting2 + \tracingassigns1 + \fi + \tracingcommands3 % 3 gives us more in etex + \errorcontextlines16 +}% + +% @errormsg{MSG}. Do the index-like expansions on MSG, but if things +% aren't perfect, it's not the end of the world, being an error message, +% after all. +% +\def\errormsg{\begingroup \indexnofonts \doerrormsg} +\def\doerrormsg#1{\errmessage{#1}} + +% add check for \lastpenalty to plain's definitions. If the last thing +% we did was a \nobreak, we don't want to insert more space. +% +\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount + \removelastskip\penalty-50\smallskip\fi\fi} +\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount + \removelastskip\penalty-100\medskip\fi\fi} +\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount + \removelastskip\penalty-200\bigskip\fi\fi} + +% Do @cropmarks to get crop marks. +% +\newif\ifcropmarks +\let\cropmarks = \cropmarkstrue +% +% Dimensions to add cropmarks at corners. +% Added by P. A. MacKay, 12 Nov. 1986 +% +\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines +\newdimen\cornerlong \cornerlong=1pc +\newdimen\cornerthick \cornerthick=.3pt +\newdimen\topandbottommargin \topandbottommargin=.75in + +% Output a mark which sets \thischapter, \thissection and \thiscolor. +% We dump everything together because we only have one kind of mark. +% This works because we only use \botmark / \topmark, not \firstmark. +% +% A mark contains a subexpression of the \ifcase ... \fi construct. +% \get*marks macros below extract the needed part using \ifcase. +% +% Another complication is to let the user choose whether \thischapter +% (\thissection) refers to the chapter (section) in effect at the top +% of a page, or that at the bottom of a page. The solution is +% described on page 260 of The TeXbook. It involves outputting two +% marks for the sectioning macros, one before the section break, and +% one after. I won't pretend I can describe this better than DEK... +\def\domark{% + \toks0=\expandafter{\lastchapterdefs}% + \toks2=\expandafter{\lastsectiondefs}% + \toks4=\expandafter{\prevchapterdefs}% + \toks6=\expandafter{\prevsectiondefs}% + \toks8=\expandafter{\lastcolordefs}% + \mark{% + \the\toks0 \the\toks2 % 0: top marks (\last...) + \noexpand\or \the\toks4 \the\toks6 % 1: bottom marks (default, \prev...) + \noexpand\else \the\toks8 % 2: color marks + }% +} +% \topmark doesn't work for the very first chapter (after the title +% page or the contents), so we use \firstmark there -- this gets us +% the mark with the chapter defs, unless the user sneaks in, e.g., +% @setcolor (or @url, or @link, etc.) between @contents and the very +% first @chapter. +\def\gettopheadingmarks{% + \ifcase0\topmark\fi + \ifx\thischapter\empty \ifcase0\firstmark\fi \fi +} +\def\getbottomheadingmarks{\ifcase1\botmark\fi} +\def\getcolormarks{\ifcase2\topmark\fi} + +% Avoid "undefined control sequence" errors. +\def\lastchapterdefs{} +\def\lastsectiondefs{} +\def\prevchapterdefs{} +\def\prevsectiondefs{} +\def\lastcolordefs{} + +% Main output routine. +\chardef\PAGE = 255 +\output = {\onepageout{\pagecontents\PAGE}} + +\newbox\headlinebox +\newbox\footlinebox + +% \onepageout takes a vbox as an argument. Note that \pagecontents +% does insertions, but you have to call it yourself. +\def\onepageout#1{% + \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi + % + \ifodd\pageno \advance\hoffset by \bindingoffset + \else \advance\hoffset by -\bindingoffset\fi + % + % Do this outside of the \shipout so @code etc. will be expanded in + % the headline as they should be, not taken literally (outputting ''code). + \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars} + % + \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi + \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}% + % + \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi + \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}% + % + {% + % Have to do this stuff outside the \shipout because we want it to + % take effect in \write's, yet the group defined by the \vbox ends + % before the \shipout runs. + % + \indexdummies % don't expand commands in the output. + \normalturnoffactive % \ in index entries must not stay \, e.g., if + % the page break happens to be in the middle of an example. + % We don't want .vr (or whatever) entries like this: + % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} + % "\acronym" won't work when it's read back in; + % it needs to be + % {\code {{\tt \backslashcurfont }acronym} + \shipout\vbox{% + % Do this early so pdf references go to the beginning of the page. + \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi + % + \ifcropmarks \vbox to \outervsize\bgroup + \hsize = \outerhsize + \vskip-\topandbottommargin + \vtop to0pt{% + \line{\ewtop\hfil\ewtop}% + \nointerlineskip + \line{% + \vbox{\moveleft\cornerthick\nstop}% + \hfill + \vbox{\moveright\cornerthick\nstop}% + }% + \vss}% + \vskip\topandbottommargin + \line\bgroup + \hfil % center the page within the outer (page) hsize. + \ifodd\pageno\hskip\bindingoffset\fi + \vbox\bgroup + \fi + % + \unvbox\headlinebox + \pagebody{#1}% + \ifdim\ht\footlinebox > 0pt + % Only leave this space if the footline is nonempty. + % (We lessened \vsize for it in \oddfootingyyy.) + % The \baselineskip=24pt in plain's \makefootline has no effect. + \vskip 24pt + \unvbox\footlinebox + \fi + % + \ifcropmarks + \egroup % end of \vbox\bgroup + \hfil\egroup % end of (centering) \line\bgroup + \vskip\topandbottommargin plus1fill minus1fill + \boxmaxdepth = \cornerthick + \vbox to0pt{\vss + \line{% + \vbox{\moveleft\cornerthick\nsbot}% + \hfill + \vbox{\moveright\cornerthick\nsbot}% + }% + \nointerlineskip + \line{\ewbot\hfil\ewbot}% + }% + \egroup % \vbox from first cropmarks clause + \fi + }% end of \shipout\vbox + }% end of group with \indexdummies + \advancepageno + \ifnum\outputpenalty>-20000 \else\dosupereject\fi +} + +\newinsert\margin \dimen\margin=\maxdimen + +\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} +{\catcode`\@ =11 +\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi +% marginal hacks, juha@viisa.uucp (Juha Takala) +\ifvoid\margin\else % marginal info is present + \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi +\dimen@=\dp#1\relax \unvbox#1\relax +\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi +\ifr@ggedbottom \kern-\dimen@ \vfil \fi} +} + +% Here are the rules for the cropmarks. Note that they are +% offset so that the space between them is truly \outerhsize or \outervsize +% (P. A. MacKay, 12 November, 1986) +% +\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} +\def\nstop{\vbox + {\hrule height\cornerthick depth\cornerlong width\cornerthick}} +\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} +\def\nsbot{\vbox + {\hrule height\cornerlong depth\cornerthick width\cornerthick}} + +% Parse an argument, then pass it to #1. The argument is the rest of +% the input line (except we remove a trailing comment). #1 should be a +% macro which expects an ordinary undelimited TeX argument. +% +\def\parsearg{\parseargusing{}} +\def\parseargusing#1#2{% + \def\argtorun{#2}% + \begingroup + \obeylines + \spaceisspace + #1% + \parseargline\empty% Insert the \empty token, see \finishparsearg below. +} + +{\obeylines % + \gdef\parseargline#1^^M{% + \endgroup % End of the group started in \parsearg. + \argremovecomment #1\comment\ArgTerm% + }% +} + +% First remove any @comment, then any @c comment. +\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} + +% Each occurrence of `\^^M' or `\^^M' is replaced by a single space. +% +% \argremovec might leave us with trailing space, e.g., +% @end itemize @c foo +% This space token undergoes the same procedure and is eventually removed +% by \finishparsearg. +% +\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} +\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} +\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% + \def\temp{#3}% + \ifx\temp\empty + % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp: + \let\temp\finishparsearg + \else + \let\temp\argcheckspaces + \fi + % Put the space token in: + \temp#1 #3\ArgTerm +} + +% If a _delimited_ argument is enclosed in braces, they get stripped; so +% to get _exactly_ the rest of the line, we had to prevent such situation. +% We prepended an \empty token at the very beginning and we expand it now, +% just before passing the control to \argtorun. +% (Similarly, we have to think about #3 of \argcheckspacesY above: it is +% either the null string, or it ends with \^^M---thus there is no danger +% that a pair of braces would be stripped. +% +% But first, we have to remove the trailing space token. +% +\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}} + +% \parseargdef\foo{...} +% is roughly equivalent to +% \def\foo{\parsearg\Xfoo} +% \def\Xfoo#1{...} +% +% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my +% favourite TeX trick. --kasal, 16nov03 + +\def\parseargdef#1{% + \expandafter \doparseargdef \csname\string#1\endcsname #1% +} +\def\doparseargdef#1#2{% + \def#2{\parsearg#1}% + \def#1##1% +} + +% Several utility definitions with active space: +{ + \obeyspaces + \gdef\obeyedspace{ } + + % Make each space character in the input produce a normal interword + % space in the output. Don't allow a line break at this space, as this + % is used only in environments like @example, where each line of input + % should produce a line of output anyway. + % + \gdef\sepspaces{\obeyspaces\let =\tie} + + % If an index command is used in an @example environment, any spaces + % therein should become regular spaces in the raw index file, not the + % expansion of \tie (\leavevmode \penalty \@M \ ). + \gdef\unsepspaces{\let =\space} +} + + +\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} + +% Define the framework for environments in texinfo.tex. It's used like this: +% +% \envdef\foo{...} +% \def\Efoo{...} +% +% It's the responsibility of \envdef to insert \begingroup before the +% actual body; @end closes the group after calling \Efoo. \envdef also +% defines \thisenv, so the current environment is known; @end checks +% whether the environment name matches. The \checkenv macro can also be +% used to check whether the current environment is the one expected. +% +% Non-false conditionals (@iftex, @ifset) don't fit into this, so they +% are not treated as environments; they don't open a group. (The +% implementation of @end takes care not to call \endgroup in this +% special case.) + + +% At run-time, environments start with this: +\def\startenvironment#1{\begingroup\def\thisenv{#1}} +% initialize +\let\thisenv\empty + +% ... but they get defined via ``\envdef\foo{...}'': +\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} +\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} + +% Check whether we're in the right environment: +\def\checkenv#1{% + \def\temp{#1}% + \ifx\thisenv\temp + \else + \badenverr + \fi +} + +% Environment mismatch, #1 expected: +\def\badenverr{% + \errhelp = \EMsimple + \errmessage{This command can appear only \inenvironment\temp, + not \inenvironment\thisenv}% +} +\def\inenvironment#1{% + \ifx#1\empty + outside of any environment% + \else + in environment \expandafter\string#1% + \fi +} + +% @end foo executes the definition of \Efoo. +% But first, it executes a specialized version of \checkenv +% +\parseargdef\end{% + \if 1\csname iscond.#1\endcsname + \else + % The general wording of \badenverr may not be ideal. + \expandafter\checkenv\csname#1\endcsname + \csname E#1\endcsname + \endgroup + \fi +} + +\newhelp\EMsimple{Press RETURN to continue.} + + +% Be sure we're in horizontal mode when doing a tie, since we make space +% equivalent to this in @example-like environments. Otherwise, a space +% at the beginning of a line will start with \penalty -- and +% since \penalty is valid in vertical mode, we'd end up putting the +% penalty on the vertical list instead of in the new paragraph. +{\catcode`@ = 11 + % Avoid using \@M directly, because that causes trouble + % if the definition is written into an index file. + \global\let\tiepenalty = \@M + \gdef\tie{\leavevmode\penalty\tiepenalty\ } +} + +% @: forces normal size whitespace following. +\def\:{\spacefactor=1000 } + +% @* forces a line break. +\def\*{\unskip\hfil\break\hbox{}\ignorespaces} + +% @/ allows a line break. +\let\/=\allowbreak + +% @. is an end-of-sentence period. +\def\.{.\spacefactor=\endofsentencespacefactor\space} + +% @! is an end-of-sentence bang. +\def\!{!\spacefactor=\endofsentencespacefactor\space} + +% @? is an end-of-sentence query. +\def\?{?\spacefactor=\endofsentencespacefactor\space} + +% @frenchspacing on|off says whether to put extra space after punctuation. +% +\def\onword{on} +\def\offword{off} +% +\parseargdef\frenchspacing{% + \def\temp{#1}% + \ifx\temp\onword \plainfrenchspacing + \else\ifx\temp\offword \plainnonfrenchspacing + \else + \errhelp = \EMsimple + \errmessage{Unknown @frenchspacing option `\temp', must be on|off}% + \fi\fi +} + +% @w prevents a word break. Without the \leavevmode, @w at the +% beginning of a paragraph, when TeX is still in vertical mode, would +% produce a whole line of output instead of starting the paragraph. +\def\w#1{\leavevmode\hbox{#1}} + +% @group ... @end group forces ... to be all on one page, by enclosing +% it in a TeX vbox. We use \vtop instead of \vbox to construct the box +% to keep its height that of a normal line. According to the rules for +% \topskip (p.114 of the TeXbook), the glue inserted is +% max (\topskip - \ht (first item), 0). If that height is large, +% therefore, no glue is inserted, and the space between the headline and +% the text is small, which looks bad. +% +% Another complication is that the group might be very large. This can +% cause the glue on the previous page to be unduly stretched, because it +% does not have much material. In this case, it's better to add an +% explicit \vfill so that the extra space is at the bottom. The +% threshold for doing this is if the group is more than \vfilllimit +% percent of a page (\vfilllimit can be changed inside of @tex). +% +\newbox\groupbox +\def\vfilllimit{0.7} +% +\envdef\group{% + \ifnum\catcode`\^^M=\active \else + \errhelp = \groupinvalidhelp + \errmessage{@group invalid in context where filling is enabled}% + \fi + \startsavinginserts + % + \setbox\groupbox = \vtop\bgroup + % Do @comment since we are called inside an environment such as + % @example, where each end-of-line in the input causes an + % end-of-line in the output. We don't want the end-of-line after + % the `@group' to put extra space in the output. Since @group + % should appear on a line by itself (according to the Texinfo + % manual), we don't worry about eating any user text. + \comment +} +% +% The \vtop produces a box with normal height and large depth; thus, TeX puts +% \baselineskip glue before it, and (when the next line of text is done) +% \lineskip glue after it. Thus, space below is not quite equal to space +% above. But it's pretty close. +\def\Egroup{% + % To get correct interline space between the last line of the group + % and the first line afterwards, we have to propagate \prevdepth. + \endgraf % Not \par, as it may have been set to \lisppar. + \global\dimen1 = \prevdepth + \egroup % End the \vtop. + % \dimen0 is the vertical size of the group's box. + \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox + % \dimen2 is how much space is left on the page (more or less). + \dimen2 = \pageheight \advance\dimen2 by -\pagetotal + % if the group doesn't fit on the current page, and it's a big big + % group, force a page break. + \ifdim \dimen0 > \dimen2 + \ifdim \pagetotal < \vfilllimit\pageheight + \page + \fi + \fi + \box\groupbox + \prevdepth = \dimen1 + \checkinserts +} +% +% TeX puts in an \escapechar (i.e., `@') at the beginning of the help +% message, so this ends up printing `@group can only ...'. +% +\newhelp\groupinvalidhelp{% +group can only be used in environments such as @example,^^J% +where each line of input produces a line of output.} + +% @need space-in-mils +% forces a page break if there is not space-in-mils remaining. + +\newdimen\mil \mil=0.001in + +\parseargdef\need{% + % Ensure vertical mode, so we don't make a big box in the middle of a + % paragraph. + \par + % + % If the @need value is less than one line space, it's useless. + \dimen0 = #1\mil + \dimen2 = \ht\strutbox + \advance\dimen2 by \dp\strutbox + \ifdim\dimen0 > \dimen2 + % + % Do a \strut just to make the height of this box be normal, so the + % normal leading is inserted relative to the preceding line. + % And a page break here is fine. + \vtop to #1\mil{\strut\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak + \fi +} + +% @br forces paragraph break (and is undocumented). + +\let\br = \par + +% @page forces the start of a new page. +% +\def\page{\par\vfill\supereject} + +% @exdent text.... +% outputs text on separate line in roman font, starting at standard page margin + +% This records the amount of indent in the innermost environment. +% That's how much \exdent should take out. +\newskip\exdentamount + +% This defn is used inside fill environments such as @defun. +\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} + +% This defn is used inside nofill environments such as @example. +\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount + \leftline{\hskip\leftskip{\rm#1}}}} + +% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current +% paragraph. For more general purposes, use the \margin insertion +% class. WHICH is `l' or `r'. Not documented, written for gawk manual. +% +\newskip\inmarginspacing \inmarginspacing=1cm +\def\strutdepth{\dp\strutbox} +% +\def\doinmargin#1#2{\strut\vadjust{% + \nobreak + \kern-\strutdepth + \vtop to \strutdepth{% + \baselineskip=\strutdepth + \vss + % if you have multiple lines of stuff to put here, you'll need to + % make the vbox yourself of the appropriate size. + \ifx#1l% + \llap{\ignorespaces #2\hskip\inmarginspacing}% + \else + \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% + \fi + \null + }% +}} +\def\inleftmargin{\doinmargin l} +\def\inrightmargin{\doinmargin r} +% +% @inmargin{TEXT [, RIGHT-TEXT]} +% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; +% else use TEXT for both). +% +\def\inmargin#1{\parseinmargin #1,,\finish} +\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \def\lefttext{#1}% have both texts + \def\righttext{#2}% + \else + \def\lefttext{#1}% have only one text + \def\righttext{#1}% + \fi + % + \ifodd\pageno + \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin + \else + \def\temp{\inleftmargin\lefttext}% + \fi + \temp +} + +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). This command +% is not documented, not supported, and doesn't work. +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + +% @include FILE -- \input text of FILE. +% +\def\include{\parseargusing\filenamecatcodes\includezzz} +\def\includezzz#1{% + \pushthisfilestack + \def\thisfile{#1}% + {% + \makevalueexpandable % we want to expand any @value in FILE. + \turnoffactive % and allow special characters in the expansion + \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @include of #1^^J}% + \edef\temp{\noexpand\input #1 }% + % + % This trickery is to read FILE outside of a group, in case it makes + % definitions, etc. + \expandafter + }\temp + \popthisfilestack +} +\def\filenamecatcodes{% + \catcode`\\=\other + \catcode`~=\other + \catcode`^=\other + \catcode`_=\other + \catcode`|=\other + \catcode`<=\other + \catcode`>=\other + \catcode`+=\other + \catcode`-=\other + \catcode`\`=\other + \catcode`\'=\other +} + +\def\pushthisfilestack{% + \expandafter\pushthisfilestackX\popthisfilestack\StackTerm +} +\def\pushthisfilestackX{% + \expandafter\pushthisfilestackY\thisfile\StackTerm +} +\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% + \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% +} + +\def\popthisfilestack{\errthisfilestackempty} +\def\errthisfilestackempty{\errmessage{Internal error: + the stack of filenames is empty.}} +% +\def\thisfile{} + +% @center line +% outputs that line, centered. +% +\parseargdef\center{% + \ifhmode + \let\centersub\centerH + \else + \let\centersub\centerV + \fi + \centersub{\hfil \ignorespaces#1\unskip \hfil}% + \let\centersub\relax % don't let the definition persist, just in case +} +\def\centerH#1{{% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break +}} +% +\newcount\centerpenalty +\def\centerV#1{% + % The idea here is the same as in \startdefun, \cartouche, etc.: if + % @center is the first thing after a section heading, we need to wipe + % out the negative parskip inserted by \sectionheading, but still + % prevent a page break here. + \centerpenalty = \lastpenalty + \ifnum\centerpenalty>10000 \vskip\parskip \fi + \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi + \line{\kern\leftskip #1\kern\rightskip}% +} + +% @sp n outputs n lines of vertical space +% +\parseargdef\sp{\vskip #1\baselineskip} + +% @comment ...line which is ignored... +% @c is the same as @comment +% @ignore ... @end ignore is another way to write a comment +% +\def\comment{\begingroup \catcode`\^^M=\other% +\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% +\commentxxx} +{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} +% +\let\c=\comment + +% @paragraphindent NCHARS +% We'll use ems for NCHARS, close enough. +% NCHARS can also be the word `asis' or `none'. +% We cannot feasibly implement @paragraphindent asis, though. +% +\def\asisword{asis} % no translation, these are keywords +\def\noneword{none} +% +\parseargdef\paragraphindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \defaultparindent = 0pt + \else + \defaultparindent = #1em + \fi + \fi + \parindent = \defaultparindent +} + +% @exampleindent NCHARS +% We'll use ems for NCHARS like @paragraphindent. +% It seems @exampleindent asis isn't necessary, but +% I preserve it to make it similar to @paragraphindent. +\parseargdef\exampleindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \lispnarrowing = 0pt + \else + \lispnarrowing = #1em + \fi + \fi +} + +% @firstparagraphindent WORD +% If WORD is `none', then suppress indentation of the first paragraph +% after a section heading. If WORD is `insert', then do indent at such +% paragraphs. +% +% The paragraph indentation is suppressed or not by calling +% \suppressfirstparagraphindent, which the sectioning commands do. +% We switch the definition of this back and forth according to WORD. +% By default, we suppress indentation. +% +\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} +\def\insertword{insert} +% +\parseargdef\firstparagraphindent{% + \def\temp{#1}% + \ifx\temp\noneword + \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent + \else\ifx\temp\insertword + \let\suppressfirstparagraphindent = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @firstparagraphindent option `\temp'}% + \fi\fi +} + +% Here is how we actually suppress indentation. Redefine \everypar to +% \kern backwards by \parindent, and then reset itself to empty. +% +% We also make \indent itself not actually do anything until the next +% paragraph. +% +\gdef\dosuppressfirstparagraphindent{% + \gdef\indent{% + \restorefirstparagraphindent + \indent + }% + \gdef\noindent{% + \restorefirstparagraphindent + \noindent + }% + \global\everypar = {% + \kern -\parindent + \restorefirstparagraphindent + }% +} + +\gdef\restorefirstparagraphindent{% + \global \let \indent = \ptexindent + \global \let \noindent = \ptexnoindent + \global \everypar = {}% +} + + +% @refill is a no-op. +\let\refill=\relax + +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate (before @setfilename). +% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse + +% @setfilename is done at the beginning of every texinfo file. +% So open here the files we need to have open while reading the input. +% This makes it possible to make a .fmt file for texinfo. +\def\setfilename{% + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \iflinks + \tryauxfile + % Open the new aux file. TeX will close it automatically at exit. + \immediate\openout\auxfile=\jobname.aux + \fi % \openindices needs to do some work in any case. + \openindices + \let\setfilename=\comment % Ignore extra @setfilename cmds. + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. + \openin 1 texinfo.cnf + \ifeof 1 \else \input texinfo.cnf \fi + \closein 1 + % + \comment % Ignore the actual filename. +} + +% Called from \setfilename. +% +\def\openindices{% + \newindex{cp}% + \newcodeindex{fn}% + \newcodeindex{vr}% + \newcodeindex{tp}% + \newcodeindex{ky}% + \newcodeindex{pg}% +} + +% @bye. +\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} + + +\message{pdf,} +% adobe `portable' document format +\newcount\tempnum +\newcount\lnkcount +\newtoks\filename +\newcount\filenamelength +\newcount\pgn +\newtoks\toksA +\newtoks\toksB +\newtoks\toksC +\newtoks\toksD +\newbox\boxA +\newcount\countA +\newif\ifpdf +\newif\ifpdfmakepagedest + +% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 +% can be set). So we test for \relax and 0 as well as being undefined. +\ifx\pdfoutput\thisisundefined +\else + \ifx\pdfoutput\relax + \else + \ifcase\pdfoutput + \else + \pdftrue + \fi + \fi +\fi + +% PDF uses PostScript string constants for the names of xref targets, +% for display in the outlines, and in other places. Thus, we have to +% double any backslashes. Otherwise, a name like "\node" will be +% interpreted as a newline (\n), followed by o, d, e. Not good. +% +% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and +% related messages. The final outcome is that it is up to the TeX user +% to double the backslashes and otherwise make the string valid, so +% that's what we do. pdftex 1.30.0 (ca.2005) introduced a primitive to +% do this reliably, so we use it. + +% #1 is a control sequence in which to do the replacements, +% which we \xdef. +\def\txiescapepdf#1{% + \ifx\pdfescapestring\thisisundefined + % No primitive available; should we give a warning or log? + % Many times it won't matter. + \else + % The expandable \pdfescapestring primitive escapes parentheses, + % backslashes, and other special chars. + \xdef#1{\pdfescapestring{#1}}% + \fi +} + +\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images +with PDF output, and none of those formats could be found. (.eps cannot +be supported due to the design of the PDF format; use regular TeX (DVI +output) for that.)} + +\ifpdf + % + % Color manipulation macros based on pdfcolor.tex, + % except using rgb instead of cmyk; the latter is said to render as a + % very dark gray on-screen and a very dark halftone in print, instead + % of actual black. + \def\rgbDarkRed{0.50 0.09 0.12} + \def\rgbBlack{0 0 0} + % + % k sets the color for filling (usual text, etc.); + % K sets the color for stroking (thin rules, e.g., normal _'s). + \def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}} + % + % Set color, and create a mark which defines \thiscolor accordingly, + % so that \makeheadline knows which color to restore. + \def\setcolor#1{% + \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% + \domark + \pdfsetcolor{#1}% + } + % + \def\maincolor{\rgbBlack} + \pdfsetcolor{\maincolor} + \edef\thiscolor{\maincolor} + \def\lastcolordefs{} + % + \def\makefootline{% + \baselineskip24pt + \line{\pdfsetcolor{\maincolor}\the\footline}% + } + % + \def\makeheadline{% + \vbox to 0pt{% + \vskip-22.5pt + \line{% + \vbox to8.5pt{}% + % Extract \thiscolor definition from the marks. + \getcolormarks + % Typeset the headline with \maincolor, then restore the color. + \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}% + }% + \vss + }% + \nointerlineskip + } + % + % + \pdfcatalog{/PageMode /UseOutlines} + % + % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). + \def\dopdfimage#1#2#3{% + \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + % + % pdftex (and the PDF format) support .pdf, .png, .jpg (among + % others). Let's try in that order, PDF first since if + % someone has a scalable image, presumably better to use that than a + % bitmap. + \let\pdfimgext=\empty + \begingroup + \openin 1 #1.pdf \ifeof 1 + \openin 1 #1.PDF \ifeof 1 + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 + \errhelp = \nopdfimagehelp + \errmessage{Could not find image file #1 for pdf}% + \else \gdef\pdfimgext{JPG}% + \fi + \else \gdef\pdfimgext{jpeg}% + \fi + \else \gdef\pdfimgext{jpg}% + \fi + \else \gdef\pdfimgext{png}% + \fi + \else \gdef\pdfimgext{PDF}% + \fi + \else \gdef\pdfimgext{pdf}% + \fi + \closein 1 + \endgroup + % + % without \immediate, ancient pdftex seg faults when the same image is + % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) + \ifnum\pdftexversion < 14 + \immediate\pdfimage + \else + \immediate\pdfximage + \fi + \ifdim \wd0 >0pt width \pdfimagewidth \fi + \ifdim \wd2 >0pt height \pdfimageheight \fi + \ifnum\pdftexversion<13 + #1.\pdfimgext + \else + {#1.\pdfimgext}% + \fi + \ifnum\pdftexversion < 14 \else + \pdfrefximage \pdflastximage + \fi} + % + \def\pdfmkdest#1{{% + % We have to set dummies so commands such as @code, and characters + % such as \, aren't expanded when present in a section title. + \indexnofonts + \turnoffactive + \makevalueexpandable + \def\pdfdestname{#1}% + \txiescapepdf\pdfdestname + \safewhatsit{\pdfdest name{\pdfdestname} xyz}% + }} + % + % used to mark target names; must be expandable. + \def\pdfmkpgn#1{#1} + % + % by default, use a color that is dark enough to print on paper as + % nearly black, but still distinguishable for online viewing. + \def\urlcolor{\rgbDarkRed} + \def\linkcolor{\rgbDarkRed} + \def\endlink{\setcolor{\maincolor}\pdfendlink} + % + % Adding outlines to PDF; macros for calculating structure of outlines + % come from Petr Olsak + \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% + \else \csname#1\endcsname \fi} + \def\advancenumber#1{\tempnum=\expnumber{#1}\relax + \advance\tempnum by 1 + \expandafter\xdef\csname#1\endcsname{\the\tempnum}} + % + % #1 is the section text, which is what will be displayed in the + % outline by the pdf viewer. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node text, + % which might be empty if this toc entry had no corresponding node. + % #4 is the page number + % + \def\dopdfoutline#1#2#3#4{% + % Generate a link to the node text if that exists; else, use the + % page number. We could generate a destination for the section + % text in the case where a section has no node, but it doesn't + % seem worth the trouble, since most documents are normally structured. + \edef\pdfoutlinedest{#3}% + \ifx\pdfoutlinedest\empty + \def\pdfoutlinedest{#4}% + \else + \txiescapepdf\pdfoutlinedest + \fi + % + % Also escape PDF chars in the display string. + \edef\pdfoutlinetext{#1}% + \txiescapepdf\pdfoutlinetext + % + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% + } + % + \def\pdfmakeoutlines{% + \begingroup + % Read toc silently, to get counts of subentries for \pdfoutline. + \def\partentry##1##2##3##4{}% ignore parts in the outlines + \def\numchapentry##1##2##3##4{% + \def\thischapnum{##2}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + }% + \def\numsecentry##1##2##3##4{% + \advancenumber{chap\thischapnum}% + \def\thissecnum{##2}% + \def\thissubsecnum{0}% + }% + \def\numsubsecentry##1##2##3##4{% + \advancenumber{sec\thissecnum}% + \def\thissubsecnum{##2}% + }% + \def\numsubsubsecentry##1##2##3##4{% + \advancenumber{subsec\thissubsecnum}% + }% + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + % + % use \def rather than \let here because we redefine \chapentry et + % al. a second time, below. + \def\appentry{\numchapentry}% + \def\appsecentry{\numsecentry}% + \def\appsubsecentry{\numsubsecentry}% + \def\appsubsubsecentry{\numsubsubsecentry}% + \def\unnchapentry{\numchapentry}% + \def\unnsecentry{\numsecentry}% + \def\unnsubsecentry{\numsubsecentry}% + \def\unnsubsubsecentry{\numsubsubsecentry}% + \readdatafile{toc}% + % + % Read toc second time, this time actually producing the outlines. + % The `-' means take the \expnumber as the absolute number of + % subentries, which we calculated on our first read of the .toc above. + % + % We use the node names as the destinations. + \def\numchapentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% + \def\numsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% + \def\numsubsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% + \def\numsubsubsecentry##1##2##3##4{% count is always zero + \dopdfoutline{##1}{}{##3}{##4}}% + % + % PDF outlines are displayed using system fonts, instead of + % document fonts. Therefore we cannot use special characters, + % since the encoding is unknown. For example, the eogonek from + % Latin 2 (0xea) gets translated to a | character. Info from + % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. + % + % TODO this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Too + % much work for too little return. Just use the ASCII equivalents + % we use for the index sort strings. + % + \indexnofonts + \setupdatafile + % We can have normal brace characters in the PDF outlines, unlike + % Texinfo index files. So set that up. + \def\{{\lbracecharliteral}% + \def\}{\rbracecharliteral}% + \catcode`\\=\active \otherbackslash + \input \tocreadfilename + \endgroup + } + {\catcode`[=1 \catcode`]=2 + \catcode`{=\other \catcode`}=\other + \gdef\lbracecharliteral[{]% + \gdef\rbracecharliteral[}]% + ] + % + \def\skipspaces#1{\def\PP{#1}\def\D{|}% + \ifx\PP\D\let\nextsp\relax + \else\let\nextsp\skipspaces + \addtokens{\filename}{\PP}% + \advance\filenamelength by 1 + \fi + \nextsp} + \def\getfilename#1{% + \filenamelength=0 + % If we don't expand the argument now, \skipspaces will get + % snagged on things like "@value{foo}". + \edef\temp{#1}% + \expandafter\skipspaces\temp|\relax + } + \ifnum\pdftexversion < 14 + \let \startlink \pdfannotlink + \else + \let \startlink \pdfstartlink + \fi + % make a live url in pdf output. + \def\pdfurl#1{% + \begingroup + % it seems we really need yet another set of dummies; have not + % tried to figure out what each command should do in the context + % of @url. for now, just make @/ a no-op, that's the only one + % people have actually reported a problem with. + % + \normalturnoffactive + \def\@{@}% + \let\/=\empty + \makevalueexpandable + % do we want to go so far as to use \indexnofonts instead of just + % special-casing \var here? + \def\var##1{##1}% + % + \leavevmode\setcolor{\urlcolor}% + \startlink attr{/Border [0 0 0]}% + user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + \endgroup} + \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} + \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} + \def\maketoks{% + \expandafter\poptoks\the\toksA|ENDTOKS|\relax + \ifx\first0\adn0 + \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 + \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 + \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 + \else + \ifnum0=\countA\else\makelink\fi + \ifx\first.\let\next=\done\else + \let\next=\maketoks + \addtokens{\toksB}{\the\toksD} + \ifx\first,\addtokens{\toksB}{\space}\fi + \fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \next} + \def\makelink{\addtokens{\toksB}% + {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} + \def\pdflink#1{% + \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} + \setcolor{\linkcolor}#1\endlink} + \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} +\else + % non-pdf mode + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\setcolor = \gobble + \let\pdfsetcolor = \gobble + \let\pdfmakeoutlines = \relax +\fi % \ifx\pdfoutput + + +\message{fonts,} + +% Change the current font style to #1, remembering it in \curfontstyle. +% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in +% italics, not bold italics. +% +\def\setfontstyle#1{% + \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. + \csname ten#1\endcsname % change the current font +} + +% Select #1 fonts with the current style. +% +\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} + +\def\rm{\fam=0 \setfontstyle{rm}} +\def\it{\fam=\itfam \setfontstyle{it}} +\def\sl{\fam=\slfam \setfontstyle{sl}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} +\def\tt{\fam=\ttfam \setfontstyle{tt}} + +% Unfortunately, we have to override this for titles and the like, since +% in those cases "rm" is bold. Sigh. +\def\rmisbold{\rm\def\curfontstyle{bf}} + +% Texinfo sort of supports the sans serif font style, which plain TeX does not. +% So we set up a \sf. +\newfam\sffam +\def\sf{\fam=\sffam \setfontstyle{sf}} +\let\li = \sf % Sometimes we call it \li, not \sf. + +% We don't need math for this font style. +\def\ttsl{\setfontstyle{ttsl}} + + +% Set the baselineskip to #1, and the lineskip and strut size +% correspondingly. There is no deep meaning behind these magic numbers +% used as factors; they just match (closely enough) what Knuth defined. +% +\def\lineskipfactor{.08333} +\def\strutheightpercent{.70833} +\def\strutdepthpercent {.29167} +% +% can get a sort of poor man's double spacing by redefining this. +\def\baselinefactor{1} +% +\newdimen\textleading +\def\setleading#1{% + \dimen0 = #1\relax + \normalbaselineskip = \baselinefactor\dimen0 + \normallineskip = \lineskipfactor\normalbaselineskip + \normalbaselines + \setbox\strutbox =\hbox{% + \vrule width0pt height\strutheightpercent\baselineskip + depth \strutdepthpercent \baselineskip + }% +} + +% PDF CMaps. See also LaTeX's t1.cmap. +% +% do nothing with this by default. +\expandafter\let\csname cmapOT1\endcsname\gobble +\expandafter\let\csname cmapOT1IT\endcsname\gobble +\expandafter\let\csname cmapOT1TT\endcsname\gobble + +% if we are producing pdf, and we have \pdffontattr, then define cmaps. +% (\pdffontattr was introduced many years ago, but people still run +% older pdftex's; it's easy to conditionalize, so we do.) +\ifpdf \ifx\pdffontattr\thisisundefined \else + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1-0) +%%Title: (TeX-OT1-0 TeX OT1 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1) +/Supplement 0 +>> def +/CMapName /TeX-OT1-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<23> <26> <0023> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +40 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1IT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1IT-0) +%%Title: (TeX-OT1IT-0 TeX OT1IT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1IT) +/Supplement 0 +>> def +/CMapName /TeX-OT1IT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<25> <26> <0025> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +42 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<23> <0023> +<24> <00A3> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1IT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1TT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1TT-0) +%%Title: (TeX-OT1TT-0 TeX OT1TT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1TT) +/Supplement 0 +>> def +/CMapName /TeX-OT1TT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +5 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<21> <26> <0021> +<28> <5F> <0028> +<61> <7E> <0061> +endbfrange +32 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <2191> +<0C> <2193> +<0D> <0027> +<0E> <00A1> +<0F> <00BF> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<20> <2423> +<27> <2019> +<60> <2018> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1TT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +\fi\fi + + +% Set the font macro #1 to the font named \fontprefix#2. +% #3 is the font's design size, #4 is a scale factor, #5 is the CMap +% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit). +% Example: +% #1 = \textrm +% #2 = \rmshape +% #3 = 10 +% #4 = \mainmagstep +% #5 = OT1 +% +\def\setfont#1#2#3#4#5{% + \font#1=\fontprefix#2#3 scaled #4 + \csname cmap#5\endcsname#1% +} +% This is what gets called when #5 of \setfont is empty. +\let\cmap\gobble +% +% (end of cmaps) + +% Use cm as the default font prefix. +% To specify the font prefix, you must define \fontprefix +% before you read in texinfo.tex. +\ifx\fontprefix\thisisundefined +\def\fontprefix{cm} +\fi +% Support font families that don't use the same naming scheme as CM. +\def\rmshape{r} +\def\rmbshape{bx} % where the normal face is bold +\def\bfshape{b} +\def\bxshape{bx} +\def\ttshape{tt} +\def\ttbshape{tt} +\def\ttslshape{sltt} +\def\itshape{ti} +\def\itbshape{bxti} +\def\slshape{sl} +\def\slbshape{bxsl} +\def\sfshape{ss} +\def\sfbshape{ss} +\def\scshape{csc} +\def\scbshape{csc} + +% Definitions for a main text size of 11pt. (The default in Texinfo.) +% +\def\definetextfontsizexi{% +% Text fonts (11.2pt, magstep1). +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1095} + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstep1}{OT1} +\setfont\deftt\ttshape{10}{\magstep1}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 +\def\smallecsize{0900} + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 +\def\smallerecsize{0800} + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\titleecsize{2074} + +% Chapter (and unnumbered) fonts (17.28pt). +\def\chapnominalsize{17pt} +\setfont\chaprm\rmbshape{12}{\magstep2}{OT1} +\setfont\chapit\itbshape{10}{\magstep3}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep3}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT} +\setfont\chapsf\sfbshape{17}{1000}{OT1} +\let\chapbf=\chaprm +\setfont\chapsc\scbshape{10}{\magstep3}{OT1} +\font\chapi=cmmi12 scaled \magstep2 +\font\chapsy=cmsy10 scaled \magstep3 +\def\chapecsize{1728} + +% Section fonts (14.4pt). +\def\secnominalsize{14pt} +\setfont\secrm\rmbshape{12}{\magstep1}{OT1} +\setfont\secit\itbshape{10}{\magstep2}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep2}{OT1} +\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\secsf\sfbshape{12}{\magstep1}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep2}{OT1} +\font\seci=cmmi12 scaled \magstep1 +\font\secsy=cmsy10 scaled \magstep2 +\def\sececsize{1440} + +% Subsection fonts (13.15pt). +\def\ssecnominalsize{13pt} +\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1} +\setfont\ssecit\itbshape{10}{1315}{OT1IT} +\setfont\ssecsl\slbshape{10}{1315}{OT1} +\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT} +\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1315}{OT1} +\font\sseci=cmmi12 scaled \magstephalf +\font\ssecsy=cmsy10 scaled 1315 +\def\ssececsize{1200} + +% Reduced fonts for @acro in text (10pt). +\def\reducednominalsize{10pt} +\setfont\reducedrm\rmshape{10}{1000}{OT1} +\setfont\reducedtt\ttshape{10}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{1000}{OT1} +\setfont\reducedit\itshape{10}{1000}{OT1IT} +\setfont\reducedsl\slshape{10}{1000}{OT1} +\setfont\reducedsf\sfshape{10}{1000}{OT1} +\setfont\reducedsc\scshape{10}{1000}{OT1} +\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT} +\font\reducedi=cmmi10 +\font\reducedsy=cmsy10 +\def\reducedecsize{1000} + +\textleading = 13.2pt % line spacing for 11pt CM +\textfonts % reset the current fonts +\rm +} % end of 11pt text font size definitions, \definetextfontsizexi + + +% Definitions to make the main text be 10pt Computer Modern, with +% section, chapter, etc., sizes following suit. This is for the GNU +% Press printing of the Emacs 22 manual. Maybe other manuals in the +% future. Used with @smallbook, which sets the leading to 12pt. +% +\def\definetextfontsizex{% +% Text fonts (10pt). +\def\textnominalsize{10pt} +\edef\mainmagstep{1000} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1000} + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstephalf}{OT1} +\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 +\def\smallecsize{0900} + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 +\def\smallerecsize{0800} + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\titleecsize{2074} + +% Chapter fonts (14.4pt). +\def\chapnominalsize{14pt} +\setfont\chaprm\rmbshape{12}{\magstep1}{OT1} +\setfont\chapit\itbshape{10}{\magstep2}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep2}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\chapsf\sfbshape{12}{\magstep1}{OT1} +\let\chapbf\chaprm +\setfont\chapsc\scbshape{10}{\magstep2}{OT1} +\font\chapi=cmmi12 scaled \magstep1 +\font\chapsy=cmsy10 scaled \magstep2 +\def\chapecsize{1440} + +% Section fonts (12pt). +\def\secnominalsize{12pt} +\setfont\secrm\rmbshape{12}{1000}{OT1} +\setfont\secit\itbshape{10}{\magstep1}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep1}{OT1} +\setfont\sectt\ttbshape{12}{1000}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT} +\setfont\secsf\sfbshape{12}{1000}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep1}{OT1} +\font\seci=cmmi12 +\font\secsy=cmsy10 scaled \magstep1 +\def\sececsize{1200} + +% Subsection fonts (10pt). +\def\ssecnominalsize{10pt} +\setfont\ssecrm\rmbshape{10}{1000}{OT1} +\setfont\ssecit\itbshape{10}{1000}{OT1IT} +\setfont\ssecsl\slbshape{10}{1000}{OT1} +\setfont\ssectt\ttbshape{10}{1000}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT} +\setfont\ssecsf\sfbshape{10}{1000}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1000}{OT1} +\font\sseci=cmmi10 +\font\ssecsy=cmsy10 +\def\ssececsize{1000} + +% Reduced fonts for @acro in text (9pt). +\def\reducednominalsize{9pt} +\setfont\reducedrm\rmshape{9}{1000}{OT1} +\setfont\reducedtt\ttshape{9}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{900}{OT1} +\setfont\reducedit\itshape{9}{1000}{OT1IT} +\setfont\reducedsl\slshape{9}{1000}{OT1} +\setfont\reducedsf\sfshape{9}{1000}{OT1} +\setfont\reducedsc\scshape{10}{900}{OT1} +\setfont\reducedttsl\ttslshape{10}{900}{OT1TT} +\font\reducedi=cmmi9 +\font\reducedsy=cmsy9 +\def\reducedecsize{0900} + +\divide\parskip by 2 % reduce space between paragraphs +\textleading = 12pt % line spacing for 10pt CM +\textfonts % reset the current fonts +\rm +} % end of 10pt text font size definitions, \definetextfontsizex + + +% We provide the user-level command +% @fonttextsize 10 +% (or 11) to redefine the text font size. pt is assumed. +% +\def\xiword{11} +\def\xword{10} +\def\xwordpt{10pt} +% +\parseargdef\fonttextsize{% + \def\textsizearg{#1}% + %\wlog{doing @fonttextsize \textsizearg}% + % + % Set \globaldefs so that documents can use this inside @tex, since + % makeinfo 4.8 does not support it, but we need it nonetheless. + % + \begingroup \globaldefs=1 + \ifx\textsizearg\xword \definetextfontsizex + \else \ifx\textsizearg\xiword \definetextfontsizexi + \else + \errhelp=\EMsimple + \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'} + \fi\fi + \endgroup +} + + +% In order for the font changes to affect most math symbols and letters, +% we have to define the \textfont of the standard families. Since +% texinfo doesn't allow for producing subscripts and superscripts except +% in the main text, we don't bother to reset \scriptfont and +% \scriptscriptfont (which would also require loading a lot more fonts). +% +\def\resetmathfonts{% + \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy + \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf + \textfont\ttfam=\tentt \textfont\sffam=\tensf +} + +% The font-changing commands redefine the meanings of \tenSTYLE, instead +% of just \STYLE. We do this because \STYLE needs to also set the +% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire +% \tenSTYLE to set the current font. +% +% Each font-changing command also sets the names \lsize (one size lower) +% and \lllsize (three sizes lower). These relative commands are used in +% the LaTeX logo and acronyms. +% +% This all needs generalizing, badly. +% +\def\textfonts{% + \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl + \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy + \let\tenttsl=\textttsl + \def\curfontsize{text}% + \def\lsize{reduced}\def\lllsize{smaller}% + \resetmathfonts \setleading{\textleading}} +\def\titlefonts{% + \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl + \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc + \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy + \let\tenttsl=\titlettsl + \def\curfontsize{title}% + \def\lsize{chap}\def\lllsize{subsec}% + \resetmathfonts \setleading{27pt}} +\def\titlefont#1{{\titlefonts\rmisbold #1}} +\def\chapfonts{% + \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl + \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% + \def\lsize{sec}\def\lllsize{text}% + \resetmathfonts \setleading{19pt}} +\def\secfonts{% + \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl + \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy + \let\tenttsl=\secttsl + \def\curfontsize{sec}% + \def\lsize{subsec}\def\lllsize{reduced}% + \resetmathfonts \setleading{16pt}} +\def\subsecfonts{% + \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl + \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy + \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% + \def\lsize{text}\def\lllsize{small}% + \resetmathfonts \setleading{15pt}} +\let\subsubsecfonts = \subsecfonts +\def\reducedfonts{% + \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl + \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc + \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy + \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% + \def\lsize{small}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallfonts{% + \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl + \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc + \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy + \let\tenttsl=\smallttsl + \def\curfontsize{small}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallerfonts{% + \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl + \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc + \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy + \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{9.5pt}} + +% Fonts for short table of contents. +\setfont\shortcontrm\rmshape{12}{1000}{OT1} +\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 +\setfont\shortcontsl\slshape{12}{1000}{OT1} +\setfont\shortconttt\ttshape{12}{1000}{OT1TT} + +% Define these just so they can be easily changed for other fonts. +\def\angleleft{$\langle$} +\def\angleright{$\rangle$} + +% Set the fonts to use with the @small... environments. +\let\smallexamplefonts = \smallfonts + +% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample +% can fit this many characters: +% 8.5x11=86 smallbook=72 a4=90 a5=69 +% If we use \scriptfonts (8pt), then we can fit this many characters: +% 8.5x11=90+ smallbook=80 a4=90+ a5=77 +% For me, subjectively, the few extra characters that fit aren't worth +% the additional smallness of 8pt. So I'm making the default 9pt. +% +% By the way, for comparison, here's what fits with @example (10pt): +% 8.5x11=71 smallbook=60 a4=75 a5=58 +% --karl, 24jan03. + +% Set up the default fonts, so we can use them for creating boxes. +% +\definetextfontsizexi + + +\message{markup,} + +% Check if we are currently using a typewriter font. Since all the +% Computer Modern typewriter fonts have zero interword stretch (and +% shrink), and it is reasonable to expect all typewriter fonts to have +% this property, we can check that font parameter. +% +\def\ifmonospace{\ifdim\fontdimen3\font=0pt } + +% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will +% define and register \INITMACRO to be called on markup style changes. +% \INITMACRO can check \currentmarkupstyle for the innermost +% style and the set of \ifmarkupSTYLE switches for all styles +% currently in effect. +\newif\ifmarkupvar +\newif\ifmarkupsamp +\newif\ifmarkupkey +%\newif\ifmarkupfile % @file == @samp. +%\newif\ifmarkupoption % @option == @samp. +\newif\ifmarkupcode +\newif\ifmarkupkbd +%\newif\ifmarkupenv % @env == @code. +%\newif\ifmarkupcommand % @command == @code. +\newif\ifmarkuptex % @tex (and part of @math, for now). +\newif\ifmarkupexample +\newif\ifmarkupverb +\newif\ifmarkupverbatim + +\let\currentmarkupstyle\empty + +\def\setupmarkupstyle#1{% + \csname markup#1true\endcsname + \def\currentmarkupstyle{#1}% + \markupstylesetup +} + +\let\markupstylesetup\empty + +\def\defmarkupstylesetup#1{% + \expandafter\def\expandafter\markupstylesetup + \expandafter{\markupstylesetup #1}% + \def#1% +} + +% Markup style setup for left and right quotes. +\defmarkupstylesetup\markupsetuplq{% + \expandafter\let\expandafter \temp + \csname markupsetuplq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuplqdefault \else \temp \fi +} + +\defmarkupstylesetup\markupsetuprq{% + \expandafter\let\expandafter \temp + \csname markupsetuprq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuprqdefault \else \temp \fi +} + +{ +\catcode`\'=\active +\catcode`\`=\active + +\gdef\markupsetuplqdefault{\let`\lq} +\gdef\markupsetuprqdefault{\let'\rq} + +\gdef\markupsetcodequoteleft{\let`\codequoteleft} +\gdef\markupsetcodequoteright{\let'\codequoteright} +} + +\let\markupsetuplqcode \markupsetcodequoteleft +\let\markupsetuprqcode \markupsetcodequoteright +% +\let\markupsetuplqexample \markupsetcodequoteleft +\let\markupsetuprqexample \markupsetcodequoteright +% +\let\markupsetuplqkbd \markupsetcodequoteleft +\let\markupsetuprqkbd \markupsetcodequoteright +% +\let\markupsetuplqsamp \markupsetcodequoteleft +\let\markupsetuprqsamp \markupsetcodequoteright +% +\let\markupsetuplqverb \markupsetcodequoteleft +\let\markupsetuprqverb \markupsetcodequoteright +% +\let\markupsetuplqverbatim \markupsetcodequoteleft +\let\markupsetuprqverbatim \markupsetcodequoteright + +% Allow an option to not use regular directed right quote/apostrophe +% (char 0x27), but instead the undirected quote from cmtt (char 0x0d). +% The undirected quote is ugly, so don't make it the default, but it +% works for pasting with more pdf viewers (at least evince), the +% lilypond developers report. xpdf does work with the regular 0x27. +% +\def\codequoteright{% + \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax + \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax + '% + \else \char'15 \fi + \else \char'15 \fi +} +% +% and a similar option for the left quote char vs. a grave accent. +% Modern fonts display ASCII 0x60 as a grave accent, so some people like +% the code environments to do likewise. +% +\def\codequoteleft{% + \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax + \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax + % [Knuth] pp. 380,381,391 + % \relax disables Spanish ligatures ?` and !` of \tt font. + \relax`% + \else \char'22 \fi + \else \char'22 \fi +} + +% Commands to set the quote options. +% +\parseargdef\codequoteundirected{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}% + \fi\fi +} +% +\parseargdef\codequotebacktick{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}% + \fi\fi +} + +% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font. +\def\noligaturesquoteleft{\relax\lq} + +% Count depth in font-changes, for error checks +\newcount\fontdepth \fontdepth=0 + +% Font commands. + +% #1 is the font command (\sl or \it), #2 is the text to slant. +% If we are in a monospaced environment, however, 1) always use \ttsl, +% and 2) do not add an italic correction. +\def\dosmartslant#1#2{% + \ifusingtt + {{\ttsl #2}\let\next=\relax}% + {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}% + \next +} +\def\smartslanted{\dosmartslant\sl} +\def\smartitalic{\dosmartslant\it} + +% Output an italic correction unless \next (presumed to be the following +% character) is such as not to need one. +\def\smartitaliccorrection{% + \ifx\next,% + \else\ifx\next-% + \else\ifx\next.% + \else\ifx\next\.% + \else\ifx\next\comma% + \else\ptexslash + \fi\fi\fi\fi\fi + \aftersmartic +} + +% Unconditional use \ttsl, and no ic. @var is set to this for defuns. +\def\ttslanted#1{{\ttsl #1}} + +% @cite is like \smartslanted except unconditionally use \sl. We never want +% ttsl for book titles, do we? +\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection} + +\def\aftersmartic{} +\def\var#1{% + \let\saveaftersmartic = \aftersmartic + \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}% + \smartslanted{#1}% +} + +\let\i=\smartitalic +\let\slanted=\smartslanted +\let\dfn=\smartslanted +\let\emph=\smartitalic + +% Explicit font changes: @r, @sc, undocumented @ii. +\def\r#1{{\rm #1}} % roman font +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +% @b, explicit bold. Also @strong. +\def\b#1{{\bf #1}} +\let\strong=\b + +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + +% We can't just use \exhyphenpenalty, because that only has effect at +% the end of a paragraph. Restore normal hyphenation at the end of the +% group within which \nohyphenation is presumably called. +% +\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} +\def\restorehyphenation{\hyphenchar\font = `- } + +% Set sfcode to normal for the chars that usually have another value. +% Can't use plain's \frenchspacing because it uses the `\x notation, and +% sometimes \x has an active definition that messes things up. +% +\catcode`@=11 + \def\plainfrenchspacing{% + \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m + \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + \def\endofsentencespacefactor{1000}% for @. and friends + } + \def\plainnonfrenchspacing{% + \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 + \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 + \def\endofsentencespacefactor{3000}% for @. and friends + } +\catcode`@=\other +\def\endofsentencespacefactor{3000}% default + +% @t, explicit typewriter. +\def\t#1{% + {\tt \rawbackslash \plainfrenchspacing #1}% + \null +} + +% @samp. +\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} + +% @indicateurl is \samp, that is, with quotes. +\let\indicateurl=\samp + +% @code (and similar) prints in typewriter, but with spaces the same +% size as normal in the surrounding text, without hyphenation, etc. +% This is a subroutine for that. +\def\tclose#1{% + {% + % Change normal interword space to be same as for the current font. + \spaceskip = \fontdimen2\font + % + % Switch to typewriter. + \tt + % + % But `\ ' produces the large typewriter interword space. + \def\ {{\spaceskip = 0pt{} }}% + % + % Turn off hyphenation. + \nohyphenation + % + \rawbackslash + \plainfrenchspacing + #1% + }% + \null % reset spacefactor to 1000 +} + +% We *must* turn on hyphenation at `-' and `_' in @code. +% (But see \codedashfinish below.) +% Otherwise, it is too hard to avoid overfull hboxes +% in the Emacs manual, the Library manual, etc. +% +% Unfortunately, TeX uses one parameter (\hyphenchar) to control +% both hyphenation at - and hyphenation within words. +% We must therefore turn them both off (\tclose does that) +% and arrange explicitly to hyphenate at a dash. -- rms. +{ + \catcode`\-=\active \catcode`\_=\active + \catcode`\'=\active \catcode`\`=\active + \global\let'=\rq \global\let`=\lq % default definitions + % + \global\def\code{\begingroup + \setupmarkupstyle{code}% + % The following should really be moved into \setupmarkupstyle handlers. + \catcode\dashChar=\active \catcode\underChar=\active + \ifallowcodebreaks + \let-\codedash + \let_\codeunder + \else + \let-\normaldash + \let_\realunder + \fi + % Given -foo (with a single dash), we do not want to allow a break + % after the hyphen. + \global\let\codedashprev=\codedash + % + \codex + } + % + \gdef\codedash{\futurelet\next\codedashfinish} + \gdef\codedashfinish{% + \normaldash % always output the dash character itself. + % + % Now, output a discretionary to allow a line break, unless + % (a) the next character is a -, or + % (b) the preceding character is a -. + % E.g., given --posix, we do not want to allow a break after either -. + % Given --foo-bar, we do want to allow a break between the - and the b. + \ifx\next\codedash \else + \ifx\codedashprev\codedash + \else \discretionary{}{}{}\fi + \fi + % we need the space after the = for the case when \next itself is a + % space token; it would get swallowed otherwise. As in @code{- a}. + \global\let\codedashprev= \next + } +} +\def\normaldash{-} +% +\def\codex #1{\tclose{#1}\endgroup} + +\def\codeunder{% + % this is all so @math{@code{var_name}+1} can work. In math mode, _ + % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) + % will therefore expand the active definition of _, which is us + % (inside @code that is), therefore an endless loop. + \ifusingtt{\ifmmode + \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. + \else\normalunderscore \fi + \discretionary{}{}{}}% + {\_}% +} + +% An additional complication: the above will allow breaks after, e.g., +% each of the four underscores in __typeof__. This is bad. +% @allowcodebreaks provides a document-level way to turn breaking at - +% and _ on and off. +% +\newif\ifallowcodebreaks \allowcodebreakstrue + +\def\keywordtrue{true} +\def\keywordfalse{false} + +\parseargdef\allowcodebreaks{% + \def\txiarg{#1}% + \ifx\txiarg\keywordtrue + \allowcodebreakstrue + \else\ifx\txiarg\keywordfalse + \allowcodebreaksfalse + \else + \errhelp = \EMsimple + \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}% + \fi\fi +} + +% For @command, @env, @file, @option quotes seem unnecessary, +% so use \code rather than \samp. +\let\command=\code +\let\env=\code +\let\file=\code +\let\option=\code + +% @uref (abbreviation for `urlref') takes an optional (comma-separated) +% second argument specifying the text to display and an optional third +% arg as text to display instead of (rather than in addition to) the url +% itself. First (mandatory) arg is the url. +% (This \urefnobreak definition isn't used now, leaving it for a while +% for comparison.) +\def\urefnobreak#1{\dourefnobreak #1,,,\finish} +\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \code{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% This \urefbreak definition is the active one. +\def\urefbreak{\begingroup \urefcatcodes \dourefbreak} +\let\uref=\urefbreak +\def\dourefbreak#1{\urefbreakfinish #1,,,\finish} +\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \urefcode{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% Allow line breaks around only a few characters (only). +\def\urefcatcodes{% + \catcode\ampChar=\active \catcode\dotChar=\active + \catcode\hashChar=\active \catcode\questChar=\active + \catcode\slashChar=\active +} +{ + \urefcatcodes + % + \global\def\urefcode{\begingroup + \setupmarkupstyle{code}% + \urefcatcodes + \let&\urefcodeamp + \let.\urefcodedot + \let#\urefcodehash + \let?\urefcodequest + \let/\urefcodeslash + \codex + } + % + % By default, they are just regular characters. + \global\def&{\normalamp} + \global\def.{\normaldot} + \global\def#{\normalhash} + \global\def?{\normalquest} + \global\def/{\normalslash} +} + +% we put a little stretch before and after the breakable chars, to help +% line breaking of long url's. The unequal skips make look better in +% cmtt at least, especially for dots. +\def\urefprestretch{\urefprebreak \hskip0pt plus.13em } +\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em } +% +\def\urefcodeamp{\urefprestretch \&\urefpoststretch} +\def\urefcodedot{\urefprestretch .\urefpoststretch} +\def\urefcodehash{\urefprestretch \#\urefpoststretch} +\def\urefcodequest{\urefprestretch ?\urefpoststretch} +\def\urefcodeslash{\futurelet\next\urefcodeslashfinish} +{ + \catcode`\/=\active + \global\def\urefcodeslashfinish{% + \urefprestretch \slashChar + % Allow line break only after the final / in a sequence of + % slashes, to avoid line break between the slashes in http://. + \ifx\next/\else \urefpoststretch \fi + } +} + +% One more complication: by default we'll break after the special +% characters, but some people like to break before the special chars, so +% allow that. Also allow no breaking at all, for manual control. +% +\parseargdef\urefbreakstyle{% + \def\txiarg{#1}% + \ifx\txiarg\wordnone + \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordbefore + \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordafter + \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak} + \else + \errhelp = \EMsimple + \errmessage{Unknown @urefbreakstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\wordafter{after} +\def\wordbefore{before} +\def\wordnone{none} + +\urefbreakstyle after + +% @url synonym for @uref, since that's how everyone uses it. +% +\let\url=\uref + +% rms does not like angle brackets --karl, 17may97. +% So now @email is just like @uref, unless we are pdf. +% +%\def\email#1{\angleleft{\tt #1}\angleright} +\ifpdf + \def\email#1{\doemail#1,,\finish} + \def\doemail#1,#2,#3\finish{\begingroup + \unsepspaces + \pdfurl{mailto:#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi + \endlink + \endgroup} +\else + \let\email=\uref +\fi + +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\txiarg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\txiarg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is `distinct'. +\kbdinputstyle distinct + +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}} + +\def\xkey{\key} +\def\kbdsub#1#2#3\par{% + \def\one{#1}\def\three{#3}\def\threex{??}% + \ifx\one\xkey\ifx\threex\three \key{#2}% + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi + \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +} + +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} + +% @clicksequence{File @click{} Open ...} +\def\clicksequence#1{\begingroup #1\endgroup} + +% @clickstyle @arrow (by default) +\parseargdef\clickstyle{\def\click{#1}} +\def\click{\arrow} + +% Typeset a dimension, e.g., `in' or `pt'. The only reason for the +% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. +% +\def\dmn#1{\thinspace #1} + +% @l was never documented to mean ``switch to the Lisp font'', +% and it is not used as such in any manual I can find. We need it for +% Polish suppressed-l. --karl, 22sep96. +%\def\l#1{{\li #1}\null} + +% @acronym for "FBI", "NATO", and the like. +% We print this one point size smaller, since it's intended for +% all-uppercase. +% +\def\acronym#1{\doacronym #1,,\finish} +\def\doacronym#1,#2,#3\finish{% + {\selectfonts\lsize #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi + \null % reset \spacefactor=1000 +} + +% @abbr for "Comput. J." and the like. +% No font change, but don't do end-of-sentence spacing. +% +\def\abbr#1{\doabbr #1,,\finish} +\def\doabbr#1,#2,#3\finish{% + {\plainfrenchspacing #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi + \null % reset \spacefactor=1000 +} + +% @asis just yields its argument. Used with @table, for example. +% +\def\asis#1{#1} + +% @math outputs its argument in math mode. +% +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode`\_ = \active + \gdef\mathunderscore{% + \catcode`\_=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } +} +% Another complication: we want \\ (and @\) to output a math (or tt) \. +% FYI, plain.tex uses \\ as a temporary control sequence (for no +% particular reason), but this is not advertised and we don't care. +% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathunderscore + \let\\ = \mathbackslash + \mathactive + % make the texinfo accent commands work in math mode + \let\"=\ddot + \let\'=\acute + \let\==\bar + \let\^=\hat + \let\`=\grave + \let\u=\breve + \let\v=\check + \let\~=\tilde + \let\dotaccent=\dot + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + +% Some active characters (such as <) are spaced differently in math. +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). +% +{ + \catcode`^ = \active + \catcode`< = \active + \catcode`> = \active + \catcode`+ = \active + \catcode`' = \active + \gdef\mathactive{% + \let^ = \ptexhat + \let< = \ptexless + \let> = \ptexgtr + \let+ = \ptexplus + \let' = \ptexquoteright + } +} + +% ctrl is no longer a Texinfo command, but leave this definition for fun. +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + +% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. +% Ignore unless FMTNAME == tex; then it is like @iftex and @tex, +% except specified as a normal braced arg, so no newlines to worry about. +% +\def\outfmtnametex{tex} +% +\long\def\inlinefmt#1{\doinlinefmt #1,\finish} +\long\def\doinlinefmt#1,#2,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi +} +% +% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if +% FMTNAME is tex, else ELSE-TEXT. +\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish} +\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi +} +% +% For raw, must switch into @tex before parsing the argument, to avoid +% setting catcodes prematurely. Doing it this way means that, for +% example, @inlineraw{html, foo{bar} gets a parse error instead of being +% ignored. But this isn't important because if people want a literal +% *right* brace they would have to use a command anyway, so they may as +% well use a command to get a left brace too. We could re-use the +% delimiter character idea from \verb, but it seems like overkill. +% +\long\def\inlineraw{\tex \doinlineraw} +\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish} +\def\doinlinerawtwo#1,#2,\finish{% + \def\inlinerawname{#1}% + \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi + \endgroup % close group opened by \tex. +} + +% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set. +% +\long\def\inlineifset#1{\doinlineifset #1,\finish} +\long\def\doinlineifset#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax + \else\ignorespaces#2\fi +} + +% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set. +% +\long\def\inlineifclear#1{\doinlineifclear #1,\finish} +\long\def\doinlineifclear#1,#2,\finish{% + \def\inlinevarname{#1}% + \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi +} + + +\message{glyphs,} +% and logos. + +% @@ prints an @, as does @atchar{}. +\def\@{\char64 } +\let\atchar=\@ + +% @{ @} @lbracechar{} @rbracechar{} all generate brace characters. +% Unless we're in typewriter, use \ecfont because the CM text fonts do +% not have braces, and we don't want to switch into math. +\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}} +\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}} +\let\{=\mylbrace \let\lbracechar=\{ +\let\}=\myrbrace \let\rbracechar=\} +\begingroup + % Definitions to produce \{ and \} commands for indices, + % and @{ and @} for the aux/toc files. + \catcode`\{ = \other \catcode`\} = \other + \catcode`\[ = 1 \catcode`\] = 2 + \catcode`\! = 0 \catcode`\\ = \other + !gdef!lbracecmd[\{]% + !gdef!rbracecmd[\}]% + !gdef!lbraceatcmd[@{]% + !gdef!rbraceatcmd[@}]% +!endgroup + +% @comma{} to avoid , parsing problems. +\let\comma = , + +% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent +% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. +\let\, = \ptexc +\let\dotaccent = \ptexdot +\def\ringaccent#1{{\accent23 #1}} +\let\tieaccent = \ptext +\let\ubaraccent = \ptexb +\let\udotaccent = \d + +% Other special characters: @questiondown @exclamdown @ordf @ordm +% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. +\def\questiondown{?`} +\def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} + +% Dotless i and dotless j, used for accents. +\def\imacro{i} +\def\jmacro{j} +\def\dotless#1{% + \def\temp{#1}% + \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi + \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi + \else \errmessage{@dotless can be used only with i or j}% + \fi\fi +} + +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) +% +\edef\TeX{\TeX \spacefactor=1000 } + +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{% + \ifx\textnominalsize\xwordpt + % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX. + % Revert to plain's \scriptsize, which is 7pt. + \count255=\the\fam $\fam\count255 \scriptstyle A$% + \else + % For 11pt, we can use our lllsize. + \selectfonts\lllsize A% + \fi + }% + \vss + }}% + \kern-.15em + \TeX +} + +% Some math mode symbols. +\def\bullet{$\ptexbullet$} +\def\geq{\ifmmode \ge\else $\ge$\fi} +\def\leq{\ifmmode \le\else $\le$\fi} +\def\minus{\ifmmode -\else $-$\fi} + +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. +% +\def\dots{% + \leavevmode + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em + \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=\endofsentencespacefactor +} + +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% +% Since these characters are used in examples, they should be an even number of +% \tt widths. Each \tt character is 1en, so two makes it 1em. +% +\def\point{$\star$} +\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}} +\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} +\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}} +\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} +\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}} + +% The @error{} command. +% Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% +{\tentt \global\dimen0 = 3em}% Width of the box. +\dimen2 = .55pt % Thickness of rules +% The text. (`r' is open on the right, `e' somewhat less so on the left.) +\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt} +% +\setbox\errorbox=\hbox to \dimen0{\hfil + \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. + \advance\hsize by -2\dimen2 % Rules. + \vbox{% + \hrule height\dimen2 + \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. + \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. + \kern3pt\vrule width\dimen2}% Space to right. + \hrule height\dimen2} + \hfil} +% +\def\error{\leavevmode\lower.7ex\copy\errorbox} + +% @pounds{} is a sterling sign, which Knuth put in the CM italic font. +% +\def\pounds{{\it\$}} + +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from https://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + +% Glyphs from the EC fonts. We don't use \let for the aliases, because +% sometimes we redefine the original macro, and the alias should reflect +% the redefinition. +% +% Use LaTeX names for the Icelandic letters. +\def\DH{{\ecfont \char"D0}} % Eth +\def\dh{{\ecfont \char"F0}} % eth +\def\TH{{\ecfont \char"DE}} % Thorn +\def\th{{\ecfont \char"FE}} % thorn +% +\def\guillemetleft{{\ecfont \char"13}} +\def\guillemotleft{\guillemetleft} +\def\guillemetright{{\ecfont \char"14}} +\def\guillemotright{\guillemetright} +\def\guilsinglleft{{\ecfont \char"0E}} +\def\guilsinglright{{\ecfont \char"0F}} +\def\quotedblbase{{\ecfont \char"12}} +\def\quotesinglbase{{\ecfont \char"0D}} +% +% This positioning is not perfect (see the ogonek LaTeX package), but +% we have the precomposed glyphs for the most common cases. We put the +% tests to use those glyphs in the single \ogonek macro so we have fewer +% dummy definitions to worry about for index entries, etc. +% +% ogonek is also used with other letters in Lithuanian (IOU), but using +% the precomposed glyphs for those is not so easy since they aren't in +% the same EC font. +\def\ogonek#1{{% + \def\temp{#1}% + \ifx\temp\macrocharA\Aogonek + \else\ifx\temp\macrochara\aogonek + \else\ifx\temp\macrocharE\Eogonek + \else\ifx\temp\macrochare\eogonek + \else + \ecfont \setbox0=\hbox{#1}% + \ifdim\ht0=1ex\accent"0C #1% + \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}% + \fi + \fi\fi\fi\fi + }% +} +\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A} +\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a} +\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E} +\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e} +% +% Use the ec* fonts (cm-super in outline format) for non-CM glyphs. +\def\ecfont{% + % We can't distinguish serif/sans and italic/slanted, but this + % is used for crude hacks anyway (like adding French and German + % quotes to documents typeset with CM, where we lose kerning), so + % hopefully nobody will notice/care. + \edef\ecsize{\csname\curfontsize ecsize\endcsname}% + \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% + \ifmonospace + % typewriter: + \font\thisecfont = ectt\ecsize \space at \nominalsize + \else + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi + \fi + \thisecfont +} + +% @registeredsymbol - R in a circle. The font for the R should really +% be smaller yet, but lllsize is the best we can do for now. +% Adapted from the plain.tex definition of \copyright. +% +\def\registeredsymbol{% + $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% + \hfil\crcr\Orb}}% + }$% +} + +% @textdegree - the normal degrees sign. +% +\def\textdegree{$^\circ$} + +% Laurent Siebenmann reports \Orb undefined with: +% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 +% so we'll define it if necessary. +% +\ifx\Orb\thisisundefined +\def\Orb{\mathhexbox20D} +\fi + +% Quotes. +\chardef\quotedblleft="5C +\chardef\quotedblright=`\" +\chardef\quoteleft=`\` +\chardef\quoteright=`\' + + +\message{page headings,} + +\newskip\titlepagetopglue \titlepagetopglue = 1.5in +\newskip\titlepagebottomglue \titlepagebottomglue = 2pc + +% First the title page. Must do @settitle before @titlepage. +\newif\ifseenauthor +\newif\iffinishedtitlepage + +% Do an implicit @contents or @shortcontents after @end titlepage if the +% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. +% +\newif\ifsetcontentsaftertitlepage + \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue +\newif\ifsetshortcontentsaftertitlepage + \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue + +\parseargdef\shorttitlepage{% + \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} + +\envdef\titlepage{% + % Open one extra group, as we want to close it in the middle of \Etitlepage. + \begingroup + \parindent=0pt \textfonts + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + \let\page = \oldpage + \page + \null + }% +} + +\def\Etitlepage{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + % + % Need this before the \...aftertitlepage checks so that if they are + % in effect the toc pages will come out with page numbers. + \HEADINGSon + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi +} + +\def\finishtitlepage{% + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue +} + +% Settings used for typesetting titles: no hyphenation, no indentation, +% don't worry much about spacing, ragged right. This should be used +% inside a \vbox, and fonts need to be set appropriately first. Because +% it is always used for titles, nothing else, we call \rmisbold. \par +% should be specified before the end of the \vbox, since a vbox is a group. +% +\def\raggedtitlesettings{% + \rmisbold + \hyphenpenalty=10000 + \parindent=0pt + \tolerance=5000 + \ptexraggedright +} + +% Macros to be used within @titlepage: + +\let\subtitlerm=\tenrm +\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} + +\parseargdef\title{% + \checkenv\titlepage + \vbox{\titlefonts \raggedtitlesettings #1\par}% + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt +} + +\parseargdef\subtitle{% + \checkenv\titlepage + {\subtitlefont \rightline{#1}}% +} + +% @author should come last, but may come many times. +% It can also be used inside @quotation. +% +\parseargdef\author{% + \def\temp{\quotation}% + \ifx\thisenv\temp + \def\quotationauthor{#1}% printed in \Equotation. + \else + \checkenv\titlepage + \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi + {\secfonts\rmisbold \leftline{#1}}% + \fi +} + + +% Set up page headings and footings. + +\let\thispage=\folio + +\newtoks\evenheadline % headline on even pages +\newtoks\oddheadline % headline on odd pages +\newtoks\evenfootline % footline on even pages +\newtoks\oddfootline % footline on odd pages + +% Now make TeX use those variables +\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline + \else \the\evenheadline \fi}} +\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline + \else \the\evenfootline \fi}\HEADINGShook} +\let\HEADINGShook=\relax + +% Commands to set those variables. +% For example, this is what @headings on does +% @evenheading @thistitle|@thispage|@thischapter +% @oddheading @thischapter|@thispage|@thistitle +% @evenfooting @thisfile|| +% @oddfooting ||@thisfile + + +\def\evenheading{\parsearg\evenheadingxxx} +\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} +\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddheading{\parsearg\oddheadingxxx} +\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} +\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% + +\def\evenfooting{\parsearg\evenfootingxxx} +\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} +\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddfooting{\parsearg\oddfootingxxx} +\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} +\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% + \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% + % + % Leave some space for the footline. Hopefully ok to assume + % @evenfooting will not be used by itself. + \global\advance\pageheight by -12pt + \global\advance\vsize by -12pt +} + +\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} + +% @evenheadingmarks top \thischapter <- chapter at the top of a page +% @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page +% +% The same set of arguments for: +% +% @oddheadingmarks +% @evenfootingmarks +% @oddfootingmarks +% @everyheadingmarks +% @everyfootingmarks + +\def\evenheadingmarks{\headingmarks{even}{heading}} +\def\oddheadingmarks{\headingmarks{odd}{heading}} +\def\evenfootingmarks{\headingmarks{even}{footing}} +\def\oddfootingmarks{\headingmarks{odd}{footing}} +\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1} + \headingmarks{odd}{heading}{#1} } +\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1} + \headingmarks{odd}{footing}{#1} } +% #1 = even/odd, #2 = heading/footing, #3 = top/bottom. +\def\headingmarks#1#2#3 {% + \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname + \global\expandafter\let\csname get#1#2marks\endcsname \temp +} + +\everyheadingmarks bottom +\everyfootingmarks bottom + +% @headings double turns headings on for double-sided printing. +% @headings single turns headings on for single-sided printing. +% @headings off turns them off. +% @headings on same as @headings double, retained for compatibility. +% @headings after turns on double-sided headings after this page. +% @headings doubleafter turns on double-sided headings after this page. +% @headings singleafter turns on single-sided headings after this page. +% By default, they are off at the start of a document, +% and turned `on' after @end titlepage. + +\def\headings #1 {\csname HEADINGS#1\endcsname} + +\def\headingsoff{% non-global headings elimination + \evenheadline={\hfil}\evenfootline={\hfil}% + \oddheadline={\hfil}\oddfootline={\hfil}% +} + +\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting +\HEADINGSoff % it's the default + +% When we turn headings on, set the page number to 1. +% For double-sided printing, put current file name in lower left corner, +% chapter name on inside top of right hand pages, document +% title on inside top of left hand pages, and page numbers on outside top +% edge of all pages. +\def\HEADINGSdouble{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} +\let\contentsalignmacro = \chappager + +% For single-sided printing, chapter title goes across top left of page, +% page number on top right. +\def\HEADINGSsingle{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} +\def\HEADINGSon{\HEADINGSdouble} + +\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} +\let\HEADINGSdoubleafter=\HEADINGSafter +\def\HEADINGSdoublex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} + +\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} +\def\HEADINGSsinglex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} + +% Subroutines used in generating headings +% This produces Day Month Year style of output. +% Only define if not already defined, in case a txi-??.tex file has set +% up a different format (e.g., txi-cs.tex does this). +\ifx\today\thisisundefined +\def\today{% + \number\day\space + \ifcase\month + \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr + \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug + \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec + \fi + \space\number\year} +\fi + +% @settitle line... specifies the title of the document, for headings. +% It generates no output of its own. +\def\thistitle{\putwordNoTitle} +\def\settitle{\parsearg{\gdef\thistitle}} + + +\message{tables,} +% Tables -- @table, @ftable, @vtable, @item(x). + +% default indentation of table text +\newdimen\tableindent \tableindent=.8in +% default indentation of @itemize and @enumerate text +\newdimen\itemindent \itemindent=.3in +% margin between end of table item and start of table text. +\newdimen\itemmargin \itemmargin=.1in + +% used internally for \itemindent minus \itemmargin +\newdimen\itemmax + +% Note @table, @ftable, and @vtable define @item, @itemx, etc., with +% these defs. +% They also define \itemindex +% to index the item name in whatever manner is desired (perhaps none). + +\newif\ifitemxneedsnegativevskip + +\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} + +\def\internalBitem{\smallbreak \parsearg\itemzzz} +\def\internalBitemx{\itemxpar \parsearg\itemzzz} + +\def\itemzzz #1{\begingroup % + \advance\hsize by -\rightskip + \advance\hsize by -\tableindent + \setbox0=\hbox{\itemindicate{#1}}% + \itemindex{#1}% + \nobreak % This prevents a break before @itemx. + % + % If the item text does not fit in the space we have, put it on a line + % by itself, and do not allow a page break either before or after that + % line. We do not start a paragraph here because then if the next + % command is, e.g., @kindex, the whatsit would get put into the + % horizontal list on a line by itself, resulting in extra blank space. + \ifdim \wd0>\itemmax + % + % Make this a paragraph so we get the \parskip glue and wrapping, + % but leave it ragged-right. + \begingroup + \advance\leftskip by-\tableindent + \advance\hsize by\tableindent + \advance\rightskip by0pt plus1fil\relax + \leavevmode\unhbox0\par + \endgroup + % + % We're going to be starting a paragraph, but we don't want the + % \parskip glue -- logically it's part of the @item we just started. + \nobreak \vskip-\parskip + % + % Stop a page break at the \parskip glue coming up. However, if + % what follows is an environment such as @example, there will be no + % \parskip glue; then the negative vskip we just inserted would + % cause the example and the item to crash together. So we use this + % bizarre value of 10001 as a signal to \aboveenvbreak to insert + % \parskip glue after all. Section titles are handled this way also. + % + \penalty 10001 + \endgroup + \itemxneedsnegativevskipfalse + \else + % The item text fits into the space. Start a paragraph, so that the + % following text (if any) will end up on the same line. + \noindent + % Do this with kerns and \unhbox so that if there is a footnote in + % the item text, it can migrate to the main vertical list and + % eventually be printed. + \nobreak\kern-\tableindent + \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 + \unhbox0 + \nobreak\kern\dimen0 + \endgroup + \itemxneedsnegativevskiptrue + \fi +} + +\def\item{\errmessage{@item while not in a list environment}} +\def\itemx{\errmessage{@itemx while not in a list environment}} + +% @table, @ftable, @vtable. +\envdef\table{% + \let\itemindex\gobble + \tablecheck{table}% +} +\envdef\ftable{% + \def\itemindex ##1{\doind {fn}{\code{##1}}}% + \tablecheck{ftable}% +} +\envdef\vtable{% + \def\itemindex ##1{\doind {vr}{\code{##1}}}% + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next +} +\def\tablex#1{% + \def\itemindicate{#1}% + \parsearg\tabley +} +\def\tabley#1{% + {% + \makevalueexpandable + \edef\temp{\noexpand\tablez #1\space\space\space}% + \expandafter + }\temp \endtablez +} +\def\tablez #1 #2 #3 #4\endtablez{% + \aboveenvbreak + \ifnum 0#1>0 \advance \leftskip by #1\mil \fi + \ifnum 0#2>0 \tableindent=#2\mil \fi + \ifnum 0#3>0 \advance \rightskip by #3\mil \fi + \itemmax=\tableindent + \advance \itemmax by -\itemmargin + \advance \leftskip by \tableindent + \exdentamount=\tableindent + \parindent = 0pt + \parskip = \smallskipamount + \ifdim \parskip=0pt \parskip=2pt \fi + \let\item = \internalBitem + \let\itemx = \internalBitemx +} +\def\Etable{\endgraf\afterenvbreak} +\let\Eftable\Etable +\let\Evtable\Etable +\let\Eitemize\Etable +\let\Eenumerate\Etable + +% This is the counter used by @enumerate, which is really @itemize + +\newcount \itemno + +\envdef\itemize{\parsearg\doitemize} + +\def\doitemize#1{% + \aboveenvbreak + \itemmax=\itemindent + \advance\itemmax by -\itemmargin + \advance\leftskip by \itemindent + \exdentamount=\itemindent + \parindent=0pt + \parskip=\smallskipamount + \ifdim\parskip=0pt \parskip=2pt \fi + % + % Try typesetting the item mark that if the document erroneously says + % something like @itemize @samp (intending @table), there's an error + % right away at the @itemize. It's not the best error message in the + % world, but it's better than leaving it to the @item. This means if + % the user wants an empty mark, they have to say @w{} not just @w. + \def\itemcontents{#1}% + \setbox0 = \hbox{\itemcontents}% + % + % @itemize with no arg is equivalent to @itemize @bullet. + \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi + % + \let\item=\itemizeitem +} + +% Definition of @item while inside @itemize and @enumerate. +% +\def\itemizeitem{% + \advance\itemno by 1 % for enumerations + {\let\par=\endgraf \smallbreak}% reasonable place to break + {% + % If the document has an @itemize directly after a section title, a + % \nobreak will be last on the list, and \sectionheading will have + % done a \vskip-\parskip. In that case, we don't want to zero + % parskip, or the item text will crash with the heading. On the + % other hand, when there is normal text preceding the item (as there + % usually is), we do want to zero parskip, or there would be too much + % space. In that case, we won't have a \nobreak before. At least + % that's the theory. + \ifnum\lastpenalty<10000 \parskip=0in \fi + \noindent + \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + % + \vadjust{\penalty 1200}}% not good to break after first line of item. + \flushcr +} + +% \splitoff TOKENS\endmark defines \first to be the first token in +% TOKENS, and \rest to be the remainder. +% +\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% + +% Allow an optional argument of an uppercase letter, lowercase letter, +% or number, to specify the first label in the enumerated list. No +% argument is the same as `1'. +% +\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} +\def\enumeratey #1 #2\endenumeratey{% + % If we were given no argument, pretend we were given `1'. + \def\thearg{#1}% + \ifx\thearg\empty \def\thearg{1}\fi + % + % Detect if the argument is a single token. If so, it might be a + % letter. Otherwise, the only valid thing it can be is a number. + % (We will always have one token, because of the test we just made. + % This is a good thing, since \splitoff doesn't work given nothing at + % all -- the first parameter is undelimited.) + \expandafter\splitoff\thearg\endmark + \ifx\rest\empty + % Only one token in the argument. It could still be anything. + % A ``lowercase letter'' is one whose \lccode is nonzero. + % An ``uppercase letter'' is one whose \lccode is both nonzero, and + % not equal to itself. + % Otherwise, we assume it's a number. + % + % We need the \relax at the end of the \ifnum lines to stop TeX from + % continuing to look for a . + % + \ifnum\lccode\expandafter`\thearg=0\relax + \numericenumerate % a number (we hope) + \else + % It's a letter. + \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax + \lowercaseenumerate % lowercase letter + \else + \uppercaseenumerate % uppercase letter + \fi + \fi + \else + % Multiple tokens in the argument. We hope it's a number. + \numericenumerate + \fi +} + +% An @enumerate whose labels are integers. The starting integer is +% given in \thearg. +% +\def\numericenumerate{% + \itemno = \thearg + \startenumeration{\the\itemno}% +} + +% The starting (lowercase) letter is in \thearg. +\def\lowercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more lowercase letters in @enumerate; get a bigger + alphabet}% + \fi + \char\lccode\itemno + }% +} + +% The starting (uppercase) letter is in \thearg. +\def\uppercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more uppercase letters in @enumerate; get a bigger + alphabet} + \fi + \char\uccode\itemno + }% +} + +% Call \doitemize, adding a period to the first argument and supplying the +% common last two arguments. Also subtract one from the initial value in +% \itemno, since @item increments \itemno. +% +\def\startenumeration#1{% + \advance\itemno by -1 + \doitemize{#1.}\flushcr +} + +% @alphaenumerate and @capsenumerate are abbreviations for giving an arg +% to @enumerate. +% +\def\alphaenumerate{\enumerate{a}} +\def\capsenumerate{\enumerate{A}} +\def\Ealphaenumerate{\Eenumerate} +\def\Ecapsenumerate{\Eenumerate} + + +% @multitable macros +% Amy Hendrickson, 8/18/94, 3/6/96 +% +% @multitable ... @end multitable will make as many columns as desired. +% Contents of each column will wrap at width given in preamble. Width +% can be specified either with sample text given in a template line, +% or in percent of \hsize, the current width of text on page. + +% Table can continue over pages but will only break between lines. + +% To make preamble: +% +% Either define widths of columns in terms of percent of \hsize: +% @multitable @columnfractions .25 .3 .45 +% @item ... +% +% Numbers following @columnfractions are the percent of the total +% current hsize to be used for each column. You may use as many +% columns as desired. + + +% Or use a template: +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item ... +% using the widest term desired in each column. + +% Each new table line starts with @item, each subsequent new column +% starts with @tab. Empty columns may be produced by supplying @tab's +% with nothing between them for as many times as empty columns are needed, +% ie, @tab@tab@tab will produce two empty columns. + +% @item, @tab do not need to be on their own lines, but it will not hurt +% if they are. + +% Sample multitable: + +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item first col stuff @tab second col stuff @tab third col +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff +% @tab Many paragraphs of text may be used in any column. +% +% They will wrap at the width determined by the template. +% @item@tab@tab This will be in third column. +% @end multitable + +% Default dimensions may be reset by user. +% @multitableparskip is vertical space between paragraphs in table. +% @multitableparindent is paragraph indent in table. +% @multitablecolmargin is horizontal space to be left between columns. +% @multitablelinespace is space to leave between table items, baseline +% to baseline. +% 0pt means it depends on current normal line spacing. +% +\newskip\multitableparskip +\newskip\multitableparindent +\newdimen\multitablecolspace +\newskip\multitablelinespace +\multitableparskip=0pt +\multitableparindent=6pt +\multitablecolspace=12pt +\multitablelinespace=0pt + +% Macros used to set up halign preamble: +% +\let\endsetuptable\relax +\def\xendsetuptable{\endsetuptable} +\let\columnfractions\relax +\def\xcolumnfractions{\columnfractions} +\newif\ifsetpercent + +% #1 is the @columnfraction, usually a decimal number like .5, but might +% be just 1. We just use it, whatever it is. +% +\def\pickupwholefraction#1 {% + \global\advance\colcount by 1 + \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% + \setuptable +} + +\newcount\colcount +\def\setuptable#1{% + \def\firstarg{#1}% + \ifx\firstarg\xendsetuptable + \let\go = \relax + \else + \ifx\firstarg\xcolumnfractions + \global\setpercenttrue + \else + \ifsetpercent + \let\go\pickupwholefraction + \else + \global\advance\colcount by 1 + \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a + % separator; typically that is always in the input, anyway. + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \fi + \fi + \ifx\go\pickupwholefraction + % Put the argument back for the \pickupwholefraction call, so + % we'll always have a period there to be parsed. + \def\go{\pickupwholefraction#1}% + \else + \let\go = \setuptable + \fi% + \fi + \go +} + +% multitable-only commands. +% +% @headitem starts a heading row, which we typeset in bold. +% Assignments have to be global since we are inside the implicit group +% of an alignment entry. \everycr resets \everytab so we don't have to +% undo it ourselves. +\def\headitemfont{\b}% for people to use in the template row; not changeable +\def\headitem{% + \checkenv\multitable + \crcr + \global\everytab={\bf}% can't use \headitemfont since the parsing differs + \the\everytab % for the first item +}% +% +% A \tab used to include \hskip1sp. But then the space in a template +% line is not enough. That is bad. So let's go back to just `&' until +% we again encounter the problem the 1sp was intended to solve. +% --karl, nathan@acm.org, 20apr99. +\def\tab{\checkenv\multitable &\the\everytab}% + +% @multitable ... @end multitable definitions: +% +\newtoks\everytab % insert after every tab. +% +\envdef\multitable{% + \vskip\parskip + \startsavinginserts + % + % @item within a multitable starts a normal row. + % We use \def instead of \let so that if one of the multitable entries + % contains an @itemize, we don't choke on the \item (seen as \crcr aka + % \endtemplate) expanding \doitemize. + \def\item{\crcr}% + % + \tolerance=9500 + \hbadness=9500 + \setmultitablespacing + \parskip=\multitableparskip + \parindent=\multitableparindent + \overfullrule=0pt + \global\colcount=0 + % + \everycr = {% + \noalign{% + \global\everytab={}% + \global\colcount=0 % Reset the column counter. + % Check for saved footnotes, etc. + \checkinserts + % Keeps underfull box messages off when table breaks over pages. + %\filbreak + % Maybe so, but it also creates really weird page breaks when the + % table breaks over pages. Wouldn't \vfil be better? Wait until the + % problem manifests itself, so it can be fixed for real --karl. + }% + }% + % + \parsearg\domultitable +} +\def\domultitable#1{% + % To parse everything between @multitable and @item: + \setuptable#1 \endsetuptable + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. + \halign\bgroup &% + \global\advance\colcount by 1 + \multistrut + \vtop{% + % Use the current \colcount to find the correct column width: + \hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively + % marking characters. + \noindent\ignorespaces##\unskip\multistrut + }\cr +} +\def\Emultitable{% + \crcr + \egroup % end the \halign + \global\setpercentfalse +} + +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. +\ifdim\multitablelinespace=0pt +\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip +\global\advance\multitablelinespace by-\ht0 +\fi +% Test to see if parskip is larger than space between lines of +% table. If not, do nothing. +% If so, set to same dimension as multitablelinespace. +\ifdim\multitableparskip>\multitablelinespace +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. +\fi% +\ifdim\multitableparskip=0pt +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. +\fi} + + +\message{conditionals,} + +% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, +% @ifnotxml always succeed. They currently do nothing; we don't +% attempt to check whether the conditionals are properly nested. But we +% have to remember that they are conditionals, so that @end doesn't +% attempt to close an environment group. +% +\def\makecond#1{% + \expandafter\let\csname #1\endcsname = \relax + \expandafter\let\csname iscond.#1\endcsname = 1 +} +\makecond{iftex} +\makecond{ifnotdocbook} +\makecond{ifnothtml} +\makecond{ifnotinfo} +\makecond{ifnotplaintext} +\makecond{ifnotxml} + +% Ignore @ignore, @ifhtml, @ifinfo, and the like. +% +\def\direntry{\doignore{direntry}} +\def\documentdescription{\doignore{documentdescription}} +\def\docbook{\doignore{docbook}} +\def\html{\doignore{html}} +\def\ifdocbook{\doignore{ifdocbook}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifinfo{\doignore{ifinfo}} +\def\ifnottex{\doignore{ifnottex}} +\def\ifplaintext{\doignore{ifplaintext}} +\def\ifxml{\doignore{ifxml}} +\def\ignore{\doignore{ignore}} +\def\menu{\doignore{menu}} +\def\xml{\doignore{xml}} + +% Ignore text until a line `@end #1', keeping track of nested conditionals. +% +% A count to remember the depth of nesting. +\newcount\doignorecount + +\def\doignore#1{\begingroup + % Scan in ``verbatim'' mode: + \obeylines + \catcode`\@ = \other + \catcode`\{ = \other + \catcode`\} = \other + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \spaceisspace + % + % Count number of #1's that we've seen. + \doignorecount = 0 + % + % Swallow text until we reach the matching `@end #1'. + \dodoignore{#1}% +} + +{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. + \obeylines % + % + \gdef\dodoignore#1{% + % #1 contains the command name as a string, e.g., `ifinfo'. + % + % Define a command to find the next `@end #1'. + \long\def\doignoretext##1^^M@end #1{% + \doignoretextyyy##1^^M@#1\_STOP_}% + % + % And this command to find another #1 command, at the beginning of a + % line. (Otherwise, we would consider a line `@c @ifset', for + % example, to count as an @ifset for nesting.) + \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% + % + % And now expand that command. + \doignoretext ^^M% + }% +} + +\def\doignoreyyy#1{% + \def\temp{#1}% + \ifx\temp\empty % Nothing found. + \let\next\doignoretextzzz + \else % Found a nested condition, ... + \advance\doignorecount by 1 + \let\next\doignoretextyyy % ..., look for another. + % If we're here, #1 ends with ^^M\ifinfo (for example). + \fi + \next #1% the token \_STOP_ is present just after this macro. +} + +% We have to swallow the remaining "\_STOP_". +% +\def\doignoretextzzz#1{% + \ifnum\doignorecount = 0 % We have just found the outermost @end. + \let\next\enddoignore + \else % Still inside a nested condition. + \advance\doignorecount by -1 + \let\next\doignoretext % Look for the next @end. + \fi + \next +} + +% Finish off ignored text. +{ \obeylines% + % Ignore anything after the last `@end #1'; this matters in verbatim + % environments, where otherwise the newline after an ignored conditional + % would result in a blank line in the output. + \gdef\enddoignore#1^^M{\endgroup\ignorespaces}% +} + + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. +% We rely on the fact that \parsearg sets \catcode`\ =10. +% +\parseargdef\set{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + {% + \makevalueexpandable + \def\temp{#2}% + \edef\next{\gdef\makecsname{SET#1}}% + \ifx\temp\empty + \next{}% + \else + \setzzz#2\endsetzzz + \fi + }% +} +% Remove the trailing space \setxxx inserted. +\def\setzzz#1 \endsetzzz{\next{#1}} + +% @clear VAR clears (i.e., unsets) the variable VAR. +% +\parseargdef\clear{% + {% + \makevalueexpandable + \global\expandafter\let\csname SET#1\endcsname=\relax + }% +} + +% @value{foo} gets the text saved in variable foo. +\def\value{\begingroup\makevalueexpandable\valuexxx} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} +{ + \catcode`\-=\active \catcode`\_=\active + % + \gdef\makevalueexpandable{% + \let\value = \expandablevalue + % We don't want these characters active, ... + \catcode`\-=\other \catcode`\_=\other + % ..., but we might end up with active ones in the argument if + % we're called from @code, as @code{@value{foo-bar_}}, though. + % So \let them to their normal equivalents. + \let-\normaldash \let_\normalunderscore + } +} + +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we call \makevalueexpandable in \indexdummies). +% The command has to be fully expandable (if the variable is set), since +% the result winds up in the index file. This means that if the +% variable's value contains other Texinfo commands, it's almost certain +% it will fail (although perhaps we could fix that with sufficient work +% to do a one-level expansion on the result, instead of complete). +% +% Unfortunately, this has the consequence that when _ is in the *value* +% of an @set, it does not print properly in the roman fonts (get the cmr +% dot accent at position 126 instead). No fix comes to mind, and it's +% been this way since 2003 or earlier, so just ignore it. +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% + \message{Variable `#1', used in @value, is not set.}% + \else + \csname SET#1\endcsname + \fi +} + +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +% To get the special treatment we need for `@end ifset,' we call +% \makecond and then redefine. +% +\makecond{ifset} +\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} +\def\doifset#1#2{% + {% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname SET#2\endcsname\relax + #1% If not set, redefine \next. + \fi + \expandafter + }\next +} +\def\ifsetfail{\doignore{ifset}} + +% @ifclear VAR ... @end executes the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. +% +% The `\else' inside the `\doifset' parameter is a trick to reuse the +% above code: if the variable is not set, do nothing, if it is set, +% then redefine \next to \ifclearfail. +% +\makecond{ifclear} +\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} +\def\ifclearfail{\doignore{ifclear}} + +% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written +% without the @) is in fact defined. We can only feasibly check at the +% TeX level, so something like `mathcode' is going to considered +% defined even though it is not a Texinfo command. +% +\makecond{ifcommanddefined} +\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}} +% +\def\doifcmddefined#1#2{{% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname #2\endcsname\relax + #1% If not defined, \let\next as above. + \fi + \expandafter + }\next +} +\def\ifcmddefinedfail{\doignore{ifcommanddefined}} + +% @ifcommandnotdefined CMD ... handled similar to @ifclear above. +\makecond{ifcommandnotdefined} +\def\ifcommandnotdefined{% + \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}} +\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}} + +% Set the `txicommandconditionals' variable, so documents have a way to +% test if the @ifcommand...defined conditionals are available. +\set txicommandconditionals + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory=\comment + +% @defininfoenclose. +\let\definfoenclose=\comment + + +\message{indexing,} +% Index generation facilities + +% Define \newwrite to be identical to plain tex's \newwrite +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} + +% \newindex {foo} defines an index named foo. +% It automatically defines \fooindex such that +% \fooindex ...rest of line... puts an entry in the index foo. +% It also defines \fooindfile to be the number of the output channel for +% the file that accumulates this index. The file's extension is foo. +% The name of an index should be no more than 2 characters long +% for the sake of vms. +% +\def\newindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 % Open the file + \fi + \expandafter\xdef\csname#1index\endcsname{% % Define @#1index + \noexpand\doindex{#1}} +} + +% @defindex foo == \newindex{foo} +% +\def\defindex{\parsearg\newindex} + +% Define @defcodeindex, like @defindex except put all entries in @code. +% +\def\defcodeindex{\parsearg\newcodeindex} +% +\def\newcodeindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 + \fi + \expandafter\xdef\csname#1index\endcsname{% + \noexpand\docodeindex{#1}}% +} + + +% @synindex foo bar makes index foo feed into index bar. +% Do this instead of @defindex foo if you don't want it as a separate index. +% +% @syncodeindex foo bar similar, but put all entries made for index foo +% inside @code. +% +\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}} +\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}} + +% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), +% #3 the target index (bar). +\def\dosynindex#1#2#3{% + % Only do \closeout if we haven't already done it, else we'll end up + % closing the target index. + \expandafter \ifx\csname donesynindex#2\endcsname \relax + % The \closeout helps reduce unnecessary open files; the limit on the + % Acorn RISC OS is a mere 16 files. + \expandafter\closeout\csname#2indfile\endcsname + \expandafter\let\csname donesynindex#2\endcsname = 1 + \fi + % redefine \fooindfile: + \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname + \expandafter\let\csname#2indfile\endcsname=\temp + % redefine \fooindex: + \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% +} + +% Define \doindex, the driver for all \fooindex macros. +% Argument #1 is generated by the calling \fooindex macro, +% and it is "foo", the name of the index. + +% \doindex just uses \parsearg; it calls \doind for the actual work. +% This is because \doind is more useful to call from other macros. + +% There is also \dosubind {index}{topic}{subtopic} +% which makes an entry in a two-level index such as the operation index. + +\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} +\def\singleindexer #1{\doind{\indexname}{#1}} + +% like the previous two, but they put @code around the argument. +\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} +\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} + +% Take care of Texinfo commands that can appear in an index entry. +% Since there are some commands we want to expand, and others we don't, +% we have to laboriously prevent expansion for those that we don't. +% +\def\indexdummies{% + \escapechar = `\\ % use backslash in output files. + \def\@{@}% change to @@ when we switch to @ as escape char in index files. + \def\ {\realbackslash\space }% + % + % Need these unexpandable (because we define \tt as a dummy) + % definitions when @{ or @} appear in index entry text. Also, more + % complicated, when \tex is in effect and \{ is a \delimiter again. + % We can't use \lbracecmd and \rbracecmd because texindex assumes + % braces and backslashes are used only as delimiters. Perhaps we + % should define @lbrace and @rbrace commands a la @comma. + \def\{{{\tt\char123}}% + \def\}{{\tt\char125}}% + % + % I don't entirely understand this, but when an index entry is + % generated from a macro call, the \endinput which \scanmacro inserts + % causes processing to be prematurely terminated. This is, + % apparently, because \indexsorttmp is fully expanded, and \endinput + % is an expandable command. The redefinition below makes \endinput + % disappear altogether for that purpose -- although logging shows that + % processing continues to some further point. On the other hand, it + % seems \endinput does not hurt in the printed index arg, since that + % is still getting written without apparent harm. + % + % Sample source (mac-idx3.tex, reported by Graham Percival to + % help-texinfo, 22may06): + % @macro funindex {WORD} + % @findex xyz + % @end macro + % ... + % @funindex commtest + % + % The above is not enough to reproduce the bug, but it gives the flavor. + % + % Sample whatsit resulting: + % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} + % + % So: + \let\endinput = \empty + % + % Do the redefinitions. + \commondummies +} + +% For the aux and toc files, @ is the escape character. So we want to +% redefine everything using @ as the escape character (instead of +% \realbackslash, still used for index files). When everything uses @, +% this will be simpler. +% +\def\atdummies{% + \def\@{@@}% + \def\ {@ }% + \let\{ = \lbraceatcmd + \let\} = \rbraceatcmd + % + % Do the redefinitions. + \commondummies + \otherbackslash +} + +% Called from \indexdummies and \atdummies. +% +\def\commondummies{% + % + % \definedummyword defines \#1 as \string\#1\space, thus effectively + % preventing its expansion. This is used only for control words, + % not control letters, because the \space would be incorrect for + % control characters, but is needed to separate the control word + % from whatever follows. + % + % For control letters, we have \definedummyletter, which omits the + % space. + % + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). + % + \def\definedummyword ##1{\def##1{\string##1\space}}% + \def\definedummyletter##1{\def##1{\string##1}}% + \let\definedummyaccent\definedummyletter + % + \commondummiesnofonts + % + \definedummyletter\_% + \definedummyletter\-% + % + % Non-English letters. + \definedummyword\AA + \definedummyword\AE + \definedummyword\DH + \definedummyword\L + \definedummyword\O + \definedummyword\OE + \definedummyword\TH + \definedummyword\aa + \definedummyword\ae + \definedummyword\dh + \definedummyword\exclamdown + \definedummyword\l + \definedummyword\o + \definedummyword\oe + \definedummyword\ordf + \definedummyword\ordm + \definedummyword\questiondown + \definedummyword\ss + \definedummyword\th + % + % Although these internal commands shouldn't show up, sometimes they do. + \definedummyword\bf + \definedummyword\gtr + \definedummyword\hat + \definedummyword\less + \definedummyword\sf + \definedummyword\sl + \definedummyword\tclose + \definedummyword\tt + % + \definedummyword\LaTeX + \definedummyword\TeX + % + % Assorted special characters. + \definedummyword\arrow + \definedummyword\bullet + \definedummyword\comma + \definedummyword\copyright + \definedummyword\registeredsymbol + \definedummyword\dots + \definedummyword\enddots + \definedummyword\entrybreak + \definedummyword\equiv + \definedummyword\error + \definedummyword\euro + \definedummyword\expansion + \definedummyword\geq + \definedummyword\guillemetleft + \definedummyword\guillemetright + \definedummyword\guilsinglleft + \definedummyword\guilsinglright + \definedummyword\lbracechar + \definedummyword\leq + \definedummyword\minus + \definedummyword\ogonek + \definedummyword\pounds + \definedummyword\point + \definedummyword\print + \definedummyword\quotedblbase + \definedummyword\quotedblleft + \definedummyword\quotedblright + \definedummyword\quoteleft + \definedummyword\quoteright + \definedummyword\quotesinglbase + \definedummyword\rbracechar + \definedummyword\result + \definedummyword\textdegree + % + % We want to disable all macros so that they are not expanded by \write. + \macrolist + % + \normalturnoffactive + % + % Handle some cases of @value -- where it does not contain any + % (non-fully-expandable) commands. + \makevalueexpandable +} + +% \commondummiesnofonts: common to \commondummies and \indexnofonts. +% +\def\commondummiesnofonts{% + % Control letters and accents. + \definedummyletter\!% + \definedummyaccent\"% + \definedummyaccent\'% + \definedummyletter\*% + \definedummyaccent\,% + \definedummyletter\.% + \definedummyletter\/% + \definedummyletter\:% + \definedummyaccent\=% + \definedummyletter\?% + \definedummyaccent\^% + \definedummyaccent\`% + \definedummyaccent\~% + \definedummyword\u + \definedummyword\v + \definedummyword\H + \definedummyword\dotaccent + \definedummyword\ogonek + \definedummyword\ringaccent + \definedummyword\tieaccent + \definedummyword\ubaraccent + \definedummyword\udotaccent + \definedummyword\dotless + % + % Texinfo font commands. + \definedummyword\b + \definedummyword\i + \definedummyword\r + \definedummyword\sansserif + \definedummyword\sc + \definedummyword\slanted + \definedummyword\t + % + % Commands that take arguments. + \definedummyword\abbr + \definedummyword\acronym + \definedummyword\anchor + \definedummyword\cite + \definedummyword\code + \definedummyword\command + \definedummyword\dfn + \definedummyword\dmn + \definedummyword\email + \definedummyword\emph + \definedummyword\env + \definedummyword\file + \definedummyword\image + \definedummyword\indicateurl + \definedummyword\inforef + \definedummyword\kbd + \definedummyword\key + \definedummyword\math + \definedummyword\option + \definedummyword\pxref + \definedummyword\ref + \definedummyword\samp + \definedummyword\strong + \definedummyword\tie + \definedummyword\uref + \definedummyword\url + \definedummyword\var + \definedummyword\verb + \definedummyword\w + \definedummyword\xref +} + +% \indexnofonts is used when outputting the strings to sort the index +% by, and when constructing control sequence names. It eliminates all +% control sequences and just writes whatever the best ASCII sort string +% would be for a given command (usually its argument). +% +\def\indexnofonts{% + % Accent commands should become @asis. + \def\definedummyaccent##1{\let##1\asis}% + % We can just ignore other control letters. + \def\definedummyletter##1{\let##1\empty}% + % All control words become @asis by default; overrides below. + \let\definedummyword\definedummyaccent + % + \commondummiesnofonts + % + % Don't no-op \tt, since it isn't a user-level command + % and is used in the definitions of the active chars like <, >, |, etc. + % Likewise with the other plain tex font commands. + %\let\tt=\asis + % + \def\ { }% + \def\@{@}% + \def\_{\normalunderscore}% + \def\-{}% @- shouldn't affect sorting + % + % Unfortunately, texindex is not prepared to handle braces in the + % content at all. So for index sorting, we map @{ and @} to strings + % starting with |, since that ASCII character is between ASCII { and }. + \def\{{|a}% + \def\lbracechar{|a}% + % + \def\}{|b}% + \def\rbracechar{|b}% + % + % Non-English letters. + \def\AA{AA}% + \def\AE{AE}% + \def\DH{DZZ}% + \def\L{L}% + \def\OE{OE}% + \def\O{O}% + \def\TH{ZZZ}% + \def\aa{aa}% + \def\ae{ae}% + \def\dh{dzz}% + \def\exclamdown{!}% + \def\l{l}% + \def\oe{oe}% + \def\ordf{a}% + \def\ordm{o}% + \def\o{o}% + \def\questiondown{?}% + \def\ss{ss}% + \def\th{zzz}% + % + \def\LaTeX{LaTeX}% + \def\TeX{TeX}% + % + % Assorted special characters. + % (The following {} will end up in the sort string, but that's ok.) + \def\arrow{->}% + \def\bullet{bullet}% + \def\comma{,}% + \def\copyright{copyright}% + \def\dots{...}% + \def\enddots{...}% + \def\equiv{==}% + \def\error{error}% + \def\euro{euro}% + \def\expansion{==>}% + \def\geq{>=}% + \def\guillemetleft{<<}% + \def\guillemetright{>>}% + \def\guilsinglleft{<}% + \def\guilsinglright{>}% + \def\leq{<=}% + \def\minus{-}% + \def\point{.}% + \def\pounds{pounds}% + \def\print{-|}% + \def\quotedblbase{"}% + \def\quotedblleft{"}% + \def\quotedblright{"}% + \def\quoteleft{`}% + \def\quoteright{'}% + \def\quotesinglbase{,}% + \def\registeredsymbol{R}% + \def\result{=>}% + \def\textdegree{o}% + % + \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax + \else \indexlquoteignore \fi + % + % We need to get rid of all macros, leaving only the arguments (if present). + % Of course this is not nearly correct, but it is the best we can do for now. + % makeinfo does not expand macros in the argument to @deffn, which ends up + % writing an index entry, and texindex isn't prepared for an index sort entry + % that starts with \. + % + % Since macro invocations are followed by braces, we can just redefine them + % to take a single TeX argument. The case of a macro invocation that + % goes to end-of-line is not handled. + % + \macrolist +} + +% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us +% ignore left quotes in the sort term. +{\catcode`\`=\active + \gdef\indexlquoteignore{\let`=\empty}} + +\let\indexbackslash=0 %overridden during \printindex. +\let\SETmarginindex=\relax % put index entries in margin (undocumented)? + +% Most index entries go through here, but \dosubind is the general case. +% #1 is the index name, #2 is the entry text. +\def\doind#1#2{\dosubind{#1}{#2}{}} + +% Workhorse for all \fooindexes. +% #1 is name of index, #2 is stuff to put there, #3 is subentry -- +% empty if called from \doind, as we usually are (the main exception +% is with most defuns, which call us directly). +% +\def\dosubind#1#2#3{% + \iflinks + {% + % Store the main index entry text (including the third arg). + \toks0 = {#2}% + % If third arg is present, precede it with a space. + \def\thirdarg{#3}% + \ifx\thirdarg\empty \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + \edef\writeto{\csname#1indfile\endcsname}% + % + \safewhatsit\dosubindwrite + }% + \fi +} + +% Write the entry in \toks0 to the index file: +% +\def\dosubindwrite{% + % Put the index entry in the margin if desired. + \ifx\SETmarginindex\relax\else + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% + \fi + % + % Remember, we are within a group. + \indexdummies % Must do this here, since \bf, etc expand at this stage + \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now + % so it will be output as is; and it will print as backslash. + % + % Process the index entry with all font commands turned off, to + % get the string to sort by. + {\indexnofonts + \edef\temp{\the\toks0}% need full expansion + \xdef\indexsorttmp{\temp}% + }% + % + % Set up the complete index entry, with both the sort key and + % the original text, including any font commands. We write + % three arguments to \entry to the .?? file (four in the + % subentry case), texindex reduces to two when writing the .??s + % sorted result. + \edef\temp{% + \write\writeto{% + \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% + }% + \temp +} + +% Take care of unwanted page breaks/skips around a whatsit: +% +% If a skip is the last thing on the list now, preserve it +% by backing up by \lastskip, doing the \write, then inserting +% the skip again. Otherwise, the whatsit generated by the +% \write or \pdfdest will make \lastskip zero. The result is that +% sequences like this: +% @end defun +% @tindex whatever +% @defun ... +% will have extra space inserted, because the \medbreak in the +% start of the @defun won't see the skip inserted by the @end of +% the previous defun. +% +% But don't do any of this if we're not in vertical mode. We +% don't want to do a \vskip and prematurely end a paragraph. +% +% Avoid page breaks due to these extra skips, too. +% +% But wait, there is a catch there: +% We'll have to check whether \lastskip is zero skip. \ifdim is not +% sufficient for this purpose, as it ignores stretch and shrink parts +% of the skip. The only way seems to be to check the textual +% representation of the skip. +% +% The following is almost like \def\zeroskipmacro{0.0pt} except that +% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). +% +\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} +% +\newskip\whatsitskip +\newcount\whatsitpenalty +% +% ..., ready, GO: +% +\def\safewhatsit#1{\ifhmode + #1% + \else + % \lastskip and \lastpenalty cannot both be nonzero simultaneously. + \whatsitskip = \lastskip + \edef\lastskipmacro{\the\lastskip}% + \whatsitpenalty = \lastpenalty + % + % If \lastskip is nonzero, that means the last item was a + % skip. And since a skip is discardable, that means this + % -\whatsitskip glue we're inserting is preceded by a + % non-discardable item, therefore it is not a potential + % breakpoint, therefore no \nobreak needed. + \ifx\lastskipmacro\zeroskipmacro + \else + \vskip-\whatsitskip + \fi + % + #1% + % + \ifx\lastskipmacro\zeroskipmacro + % If \lastskip was zero, perhaps the last item was a penalty, and + % perhaps it was >=10000, e.g., a \nobreak. In that case, we want + % to re-insert the same penalty (values >10000 are used for various + % signals); since we just inserted a non-discardable item, any + % following glue (such as a \parskip) would be a breakpoint. For example: + % @deffn deffn-whatever + % @vindex index-whatever + % Description. + % would allow a break between the index-whatever whatsit + % and the "Description." paragraph. + \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi + \else + % On the other hand, if we had a nonzero \lastskip, + % this make-up glue would be preceded by a non-discardable item + % (the whatsit from the \write), so we must insert a \nobreak. + \nobreak\vskip\whatsitskip + \fi +\fi} + +% The index entry written in the file actually looks like +% \entry {sortstring}{page}{topic} +% or +% \entry {sortstring}{page}{topic}{subtopic} +% The texindex program reads in these files and writes files +% containing these kinds of lines: +% \initial {c} +% before the first topic whose initial is c +% \entry {topic}{pagelist} +% for a topic that is used without subtopics +% \primary {topic} +% for the beginning of a topic that is used with subtopics +% \secondary {subtopic}{pagelist} +% for each subtopic. + +% Define the user-accessible indexing commands +% @findex, @vindex, @kindex, @cindex. + +\def\findex {\fnindex} +\def\kindex {\kyindex} +\def\cindex {\cpindex} +\def\vindex {\vrindex} +\def\tindex {\tpindex} +\def\pindex {\pgindex} + +\def\cindexsub {\begingroup\obeylines\cindexsub} +{\obeylines % +\gdef\cindexsub "#1" #2^^M{\endgroup % +\dosubind{cp}{#2}{#1}}} + +% Define the macros used in formatting output of the sorted index material. + +% @printindex causes a particular index (the ??s file) to get printed. +% It does not print any chapter heading (usually an @unnumbered). +% +\parseargdef\printindex{\begingroup + \dobreak \chapheadingskip{10000}% + % + \smallfonts \rm + \tolerance = 9500 + \plainfrenchspacing + \everypar = {}% don't want the \kern\-parindent from indentation suppression. + % + % See if the index file exists and is nonempty. + % Change catcode of @ here so that if the index file contains + % \initial {@} + % as its first line, TeX doesn't complain about mismatched braces + % (because it thinks @} is a control sequence). + \catcode`\@ = 11 + \openin 1 \jobname.#1s + \ifeof 1 + % \enddoublecolumns gets confused if there is no text in the index, + % and it loses the chapter title and the aux file entries for the + % index. The easiest way to prevent this problem is to make sure + % there is some text. + \putwordIndexNonexistent + \else + % + % If the index file exists but is empty, then \openin leaves \ifeof + % false. We have to make TeX try to read something from the file, so + % it can discover if there is anything in it. + \read 1 to \temp + \ifeof 1 + \putwordIndexIsEmpty + \else + % Index files are almost Texinfo source, but we use \ as the escape + % character. It would be better to use @, but that's too big a change + % to make right now. + \def\indexbackslash{\backslashcurfont}% + \catcode`\\ = 0 + \escapechar = `\\ + \begindoublecolumns + \input \jobname.#1s + \enddoublecolumns + \fi + \fi + \closein 1 +\endgroup} + +% These macros are used by the sorted index file itself. +% Change them to control the appearance of the index. + +\def\initial#1{{% + % Some minor font changes for the special characters. + \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt + % + % Remove any glue we may have, we'll be inserting our own. + \removelastskip + % + % We like breaks before the index initials, so insert a bonus. + \nobreak + \vskip 0pt plus 3\baselineskip + \penalty 0 + \vskip 0pt plus -3\baselineskip + % + % Typeset the initial. Making this add up to a whole number of + % baselineskips increases the chance of the dots lining up from column + % to column. It still won't often be perfect, because of the stretch + % we need before each entry, but it's better. + % + % No shrink because it confuses \balancecolumns. + \vskip 1.67\baselineskip plus .5\baselineskip + \leftline{\secbf #1}% + % Do our best not to break after the initial. + \nobreak + \vskip .33\baselineskip plus .1\baselineskip +}} + +% \entry typesets a paragraph consisting of the text (#1), dot leaders, and +% then page number (#2) flushed to the right margin. It is used for index +% and table of contents entries. The paragraph is indented by \leftskip. +% +% A straightforward implementation would start like this: +% \def\entry#1#2{... +% But this freezes the catcodes in the argument, and can cause problems to +% @code, which sets - active. This problem was fixed by a kludge--- +% ``-'' was active throughout whole index, but this isn't really right. +% The right solution is to prevent \entry from swallowing the whole text. +% --kasal, 21nov03 +\def\entry{% + \begingroup + % + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par + % + % Do not fill out the last line with white space. + \parfillskip = 0in + % + % No extra space above this paragraph. + \parskip = 0in + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. + % + % \hangafter is reset to 1 (which is the value we want) at the start + % of each paragraph, so we need not do anything with that. + \hangindent = 2em + % + % When the entry text needs to be broken, just fill out the first line + % with blank space. + \rightskip = 0pt plus1fil + % + % A bit of stretch before each entry for the benefit of balancing + % columns. + \vskip 0pt plus1pt + % + % When reading the text of entry, convert explicit line breaks + % from @* into spaces. The user might give these in long section + % titles, for instance. + \def\*{\unskip\space\ignorespaces}% + \def\entrybreak{\hfil\break}% + % + % Swallow the left brace of the text (first parameter): + \afterassignment\doentry + \let\temp = +} +\def\entrybreak{\unskip\space\ignorespaces}% +\def\doentry{% + \bgroup % Instead of the swallowed brace. + \noindent + \aftergroup\finishentry + % And now comes the text of the entry. +} +\def\finishentry#1{% + % #1 is the page number. + % + % The following is kludged to not output a line of dots in the index if + % there are no page numbers. The next person who breaks this will be + % cursed by a Unix daemon. + \setbox\boxA = \hbox{#1}% + \ifdim\wd\boxA = 0pt + \ % + \else + % + % If we must, put the page number on a line of its own, and fill out + % this line with blank space. (The \hfil is overwhelmed with the + % fill leaders glue in \indexdotfill if the page number does fit.) + \hfil\penalty50 + \null\nobreak\indexdotfill % Have leaders before the page number. + % + % The `\ ' here is removed by the implicit \unskip that TeX does as + % part of (the primitive) \par. Without it, a spurious underfull + % \hbox ensues. + \ifpdf + \pdfgettoks#1.% + \ \the\toksA + \else + \ #1% + \fi + \fi + \par + \endgroup +} + +% Like plain.tex's \dotfill, except uses up at least 1 em. +\def\indexdotfill{\cleaders + \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill} + +\def\primary #1{\line{#1\hfil}} + +\newskip\secondaryindent \secondaryindent=0.5cm +\def\secondary#1#2{{% + \parfillskip=0in + \parskip=0in + \hangindent=1in + \hangafter=1 + \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + \else + #2 + \fi + \par +}} + +% Define two-column mode, which we use to typeset indexes. +% Adapted from the TeXbook, page 416, which is to say, +% the manmac.tex format used to print the TeXbook itself. +\catcode`\@=11 + +\newbox\partialpage +\newdimen\doublecolumnhsize + +\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns + % Grab any single-column material above us. + \output = {% + % + % Here is a possibility not foreseen in manmac: if we accumulate a + % whole lot of material, we might end up calling this \output + % routine twice in a row (see the doublecol-lose test, which is + % essentially a couple of indexes with @setchapternewpage off). In + % that case we just ship out what is in \partialpage with the normal + % output routine. Generally, \partialpage will be empty when this + % runs and this will be a no-op. See the indexspread.tex test case. + \ifvoid\partialpage \else + \onepageout{\pagecontents\partialpage}% + \fi + % + \global\setbox\partialpage = \vbox{% + % Unvbox the main output page. + \unvbox\PAGE + \kern-\topskip \kern\baselineskip + }% + }% + \eject % run that output routine to set \partialpage + % + % Use the double-column output routine for subsequent pages. + \output = {\doublecolumnout}% + % + % Change the page size parameters. We could do this once outside this + % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 + % format, but then we repeat the same computation. Repeating a couple + % of assignments once per index is clearly meaningless for the + % execution time, so we may as well do it in one place. + % + % First we halve the line length, less a little for the gutter between + % the columns. We compute the gutter based on the line length, so it + % changes automatically with the paper format. The magic constant + % below is chosen so that the gutter has the same value (well, +-<1pt) + % as it did when we hard-coded it. + % + % We put the result in a separate register, \doublecolumhsize, so we + % can restore it in \pagesofar, after \hsize itself has (potentially) + % been clobbered. + % + \doublecolumnhsize = \hsize + \advance\doublecolumnhsize by -.04154\hsize + \divide\doublecolumnhsize by 2 + \hsize = \doublecolumnhsize + % + % Double the \vsize as well. (We don't need a separate register here, + % since nobody clobbers \vsize.) + \vsize = 2\vsize +} + +% The double-column output routine for all double-column pages except +% the last. +% +\def\doublecolumnout{% + \splittopskip=\topskip \splitmaxdepth=\maxdepth + % Get the available space for the double columns -- the normal + % (undoubled) page height minus any material left over from the + % previous page. + \dimen@ = \vsize + \divide\dimen@ by 2 + \advance\dimen@ by -\ht\partialpage + % + % box0 will be the left-hand column, box2 the right. + \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ + \onepageout\pagesofar + \unvbox255 + \penalty\outputpenalty +} +% +% Re-output the contents of the output page -- any previous material, +% followed by the two boxes we just split, in box0 and box2. +\def\pagesofar{% + \unvbox\partialpage + % + \hsize = \doublecolumnhsize + \wd0=\hsize \wd2=\hsize + \hbox to\pagewidth{\box0\hfil\box2}% +} +% +% All done with double columns. +\def\enddoublecolumns{% + % The following penalty ensures that the page builder is exercised + % _before_ we change the output routine. This is necessary in the + % following situation: + % + % The last section of the index consists only of a single entry. + % Before this section, \pagetotal is less than \pagegoal, so no + % break occurs before the last section starts. However, the last + % section, consisting of \initial and the single \entry, does not + % fit on the page and has to be broken off. Without the following + % penalty the page builder will not be exercised until \eject + % below, and by that time we'll already have changed the output + % routine to the \balancecolumns version, so the next-to-last + % double-column page will be processed with \balancecolumns, which + % is wrong: The two columns will go to the main vertical list, with + % the broken-off section in the recent contributions. As soon as + % the output routine finishes, TeX starts reconsidering the page + % break. The two columns and the broken-off section both fit on the + % page, because the two columns now take up only half of the page + % goal. When TeX sees \eject from below which follows the final + % section, it invokes the new output routine that we've set after + % \balancecolumns below; \onepageout will try to fit the two columns + % and the final section into the vbox of \pageheight (see + % \pagebody), causing an overfull box. + % + % Note that glue won't work here, because glue does not exercise the + % page builder, unlike penalties (see The TeXbook, pp. 280-281). + \penalty0 + % + \output = {% + % Split the last of the double-column material. Leave it on the + % current page, no automatic page break. + \balancecolumns + % + % If we end up splitting too much material for the current page, + % though, there will be another page break right after this \output + % invocation ends. Having called \balancecolumns once, we do not + % want to call it again. Therefore, reset \output to its normal + % definition right away. (We hope \balancecolumns will never be + % called on to balance too much material, but if it is, this makes + % the output somewhat more palatable.) + \global\output = {\onepageout{\pagecontents\PAGE}}% + }% + \eject + \endgroup % started in \begindoublecolumns + % + % \pagegoal was set to the doubled \vsize above, since we restarted + % the current page. We're now back to normal single-column + % typesetting, so reset \pagegoal to the normal \vsize (after the + % \endgroup where \vsize got restored). + \pagegoal = \vsize +} +% +% Called at the end of the double column material. +\def\balancecolumns{% + \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. + \dimen@ = \ht0 + \advance\dimen@ by \topskip + \advance\dimen@ by-\baselineskip + \divide\dimen@ by 2 % target to split to + %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% + \splittopskip = \topskip + % Loop until we get a decent breakpoint. + {% + \vbadness = 10000 + \loop + \global\setbox3 = \copy0 + \global\setbox1 = \vsplit3 to \dimen@ + \ifdim\ht3>\dimen@ + \global\advance\dimen@ by 1pt + \repeat + }% + %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% + \setbox0=\vbox to\dimen@{\unvbox1}% + \setbox2=\vbox to\dimen@{\unvbox3}% + % + \pagesofar +} +\catcode`\@ = \other + + +\message{sectioning,} +% Chapters, sections, etc. + +% Let's start with @part. +\outer\parseargdef\part{\partzzz{#1}} +\def\partzzz#1{% + \chapoddpage + \null + \vskip.3\vsize % move it down on the page a bit + \begingroup + \noindent \titlefonts\rmisbold #1\par % the text + \let\lastnode=\empty % no node to associate with + \writetocentry{part}{#1}{}% but put it in the toc + \headingsoff % no headline or footline on the part page + \chapoddpage + \endgroup +} + +% \unnumberedno is an oxymoron. But we count the unnumbered +% sections so that we can refer to them unambiguously in the pdf +% outlines by their "section number". We avoid collisions with chapter +% numbers by starting them at 10000. (If a document ever has 10000 +% chapters, we're in trouble anyway, I'm sure.) +\newcount\unnumberedno \unnumberedno = 10000 +\newcount\chapno +\newcount\secno \secno=0 +\newcount\subsecno \subsecno=0 +\newcount\subsubsecno \subsubsecno=0 + +% This counter is funny since it counts through charcodes of letters A, B, ... +\newcount\appendixno \appendixno = `\@ +% +% \def\appendixletter{\char\the\appendixno} +% We do the following ugly conditional instead of the above simple +% construct for the sake of pdftex, which needs the actual +% letter in the expansion, not just typeset. +% +\def\appendixletter{% + \ifnum\appendixno=`A A% + \else\ifnum\appendixno=`B B% + \else\ifnum\appendixno=`C C% + \else\ifnum\appendixno=`D D% + \else\ifnum\appendixno=`E E% + \else\ifnum\appendixno=`F F% + \else\ifnum\appendixno=`G G% + \else\ifnum\appendixno=`H H% + \else\ifnum\appendixno=`I I% + \else\ifnum\appendixno=`J J% + \else\ifnum\appendixno=`K K% + \else\ifnum\appendixno=`L L% + \else\ifnum\appendixno=`M M% + \else\ifnum\appendixno=`N N% + \else\ifnum\appendixno=`O O% + \else\ifnum\appendixno=`P P% + \else\ifnum\appendixno=`Q Q% + \else\ifnum\appendixno=`R R% + \else\ifnum\appendixno=`S S% + \else\ifnum\appendixno=`T T% + \else\ifnum\appendixno=`U U% + \else\ifnum\appendixno=`V V% + \else\ifnum\appendixno=`W W% + \else\ifnum\appendixno=`X X% + \else\ifnum\appendixno=`Y Y% + \else\ifnum\appendixno=`Z Z% + % The \the is necessary, despite appearances, because \appendixletter is + % expanded while writing the .toc file. \char\appendixno is not + % expandable, thus it is written literally, thus all appendixes come out + % with the same letter (or @) in the toc without it. + \else\char\the\appendixno + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} + +% Each @chapter defines these (using marks) as the number+name, number +% and name of the chapter. Page headings and footings can use +% these. @section does likewise. +\def\thischapter{} +\def\thischapternum{} +\def\thischaptername{} +\def\thissection{} +\def\thissectionnum{} +\def\thissectionname{} + +\newcount\absseclevel % used to calculate proper heading level +\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count + +% @raisesections: treat @section as chapter, @subsection as section, etc. +\def\raisesections{\global\advance\secbase by -1} +\let\up=\raisesections % original BFox name + +% @lowersections: treat @chapter as section, @section as subsection, etc. +\def\lowersections{\global\advance\secbase by 1} +\let\down=\lowersections % original BFox name + +% we only have subsub. +\chardef\maxseclevel = 3 +% +% A numbered section within an unnumbered changes to unnumbered too. +% To achieve this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unnlevel = \maxseclevel +% +% Trace whether the current chapter is an appendix or not: +% \chapheadtype is "N" or "A", unnumbered chapters are ignored. +\def\chapheadtype{N} + +% Choose a heading macro +% #1 is heading type +% #2 is heading level +% #3 is text for heading +\def\genhead#1#2#3{% + % Compute the abs. sec. level: + \absseclevel=#2 + \advance\absseclevel by \secbase + % Make sure \absseclevel doesn't fall outside the range: + \ifnum \absseclevel < 0 + \absseclevel = 0 + \else + \ifnum \absseclevel > 3 + \absseclevel = 3 + \fi + \fi + % The heading type: + \def\headtype{#1}% + \if \headtype U% + \ifnum \absseclevel < \unnlevel + \chardef\unnlevel = \absseclevel + \fi + \else + % Check for appendix sections: + \ifnum \absseclevel = 0 + \edef\chapheadtype{\headtype}% + \else + \if \headtype A\if \chapheadtype N% + \errmessage{@appendix... within a non-appendix chapter}% + \fi\fi + \fi + % Check for numbered within unnumbered: + \ifnum \absseclevel > \unnlevel + \def\headtype{U}% + \else + \chardef\unnlevel = 3 + \fi + \fi + % Now print the heading: + \if \headtype U% + \ifcase\absseclevel + \unnumberedzzz{#3}% + \or \unnumberedseczzz{#3}% + \or \unnumberedsubseczzz{#3}% + \or \unnumberedsubsubseczzz{#3}% + \fi + \else + \if \headtype A% + \ifcase\absseclevel + \appendixzzz{#3}% + \or \appendixsectionzzz{#3}% + \or \appendixsubseczzz{#3}% + \or \appendixsubsubseczzz{#3}% + \fi + \else + \ifcase\absseclevel + \chapterzzz{#3}% + \or \seczzz{#3}% + \or \numberedsubseczzz{#3}% + \or \numberedsubsubseczzz{#3}% + \fi + \fi + \fi + \suppressfirstparagraphindent +} + +% an interface: +\def\numhead{\genhead N} +\def\apphead{\genhead A} +\def\unnmhead{\genhead U} + +% @chapter, @appendix, @unnumbered. Increment top-level counter, reset +% all lower-level sectioning counters to zero. +% +% Also set \chaplevelprefix, which we prepend to @float sequence numbers +% (e.g., figures), q.v. By default (before any chapter), that is empty. +\let\chaplevelprefix = \empty +% +\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz#1{% + % section resetting is \global in case the chapter is in a group, such + % as an @include file. + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\chapno by 1 + % + % Used for \float. + \gdef\chaplevelprefix{\the\chapno.}% + \resetallfloatnos + % + % \putwordChapter can contain complex things in translations. + \toks0=\expandafter{\putwordChapter}% + \message{\the\toks0 \space \the\chapno}% + % + % Write the actual heading. + \chapmacro{#1}{Ynumbered}{\the\chapno}% + % + % So @section and the like are numbered underneath this chapter. + \global\let\section = \numberedsec + \global\let\subsection = \numberedsubsec + \global\let\subsubsection = \numberedsubsubsec +} + +\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz +% +\def\appendixzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\appendixno by 1 + \gdef\chaplevelprefix{\appendixletter.}% + \resetallfloatnos + % + % \putwordAppendix can contain complex things in translations. + \toks0=\expandafter{\putwordAppendix}% + \message{\the\toks0 \space \appendixletter}% + % + \chapmacro{#1}{Yappendix}{\appendixletter}% + % + \global\let\section = \appendixsec + \global\let\subsection = \appendixsubsec + \global\let\subsubsection = \appendixsubsubsec +} + +% normally unnmhead0 calls unnumberedzzz: +\outer\parseargdef\unnumbered{\unnmhead0{#1}} +\def\unnumberedzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\unnumberedno by 1 + % + % Since an unnumbered has no number, no prefix for figures. + \global\let\chaplevelprefix = \empty + \resetallfloatnos + % + % This used to be simply \message{#1}, but TeX fully expands the + % argument to \message. Therefore, if #1 contained @-commands, TeX + % expanded them. For example, in `@unnumbered The @cite{Book}', TeX + % expanded @cite (which turns out to cause errors because \cite is meant + % to be executed, not expanded). + % + % Anyway, we don't want the fully-expanded definition of @cite to appear + % as a result of the \message, we just want `@cite' itself. We use + % \the to achieve this: TeX expands \the only once, + % simply yielding the contents of . (We also do this for + % the toc entries.) + \toks0 = {#1}% + \message{(\the\toks0)}% + % + \chapmacro{#1}{Ynothing}{\the\unnumberedno}% + % + \global\let\section = \unnumberedsec + \global\let\subsection = \unnumberedsubsec + \global\let\subsubsection = \unnumberedsubsubsec +} + +% @centerchap is like @unnumbered, but the heading is centered. +\outer\parseargdef\centerchap{% + % Well, we could do the following in a group, but that would break + % an assumption that \chapmacro is called at the outermost level. + % Thus we are safer this way: --kasal, 24feb04 + \let\centerparametersmaybe = \centerparameters + \unnmhead0{#1}% + \let\centerparametersmaybe = \relax +} + +% @top is like @unnumbered. +\let\top\unnumbered + +% Sections. +% +\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz +\def\seczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% +} + +% normally calls appendixsectionzzz: +\outer\parseargdef\appendixsection{\apphead1{#1}} +\def\appendixsectionzzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% +} +\let\appendixsec\appendixsection + +% normally calls unnumberedseczzz: +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} +\def\unnumberedseczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% +} + +% Subsections. +% +% normally calls numberedsubseczzz: +\outer\parseargdef\numberedsubsec{\numhead2{#1}} +\def\numberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% +} + +% normally calls appendixsubseczzz: +\outer\parseargdef\appendixsubsec{\apphead2{#1}} +\def\appendixsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno}% +} + +% normally calls unnumberedsubseczzz: +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} +\def\unnumberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno}% +} + +% Subsubsections. +% +% normally numberedsubsubseczzz: +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} +\def\numberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynumbered}% + {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% normally appendixsubsubseczzz: +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} +\def\appendixsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% normally unnumberedsubsubseczzz: +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} +\def\unnumberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% These macros control what the section commands do, according +% to what kind of chapter we are in (ordinary, appendix, or unnumbered). +% Define them by default for a numbered chapter. +\let\section = \numberedsec +\let\subsection = \numberedsubsec +\let\subsubsection = \numberedsubsubsec + +% Define @majorheading, @heading and @subheading + +\def\majorheading{% + {\advance\chapheadingskip by 10pt \chapbreak }% + \parsearg\chapheadingzzz +} + +\def\chapheading{\chapbreak \parsearg\chapheadingzzz} +\def\chapheadingzzz#1{% + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip \nobreak + \suppressfirstparagraphindent +} + +% @heading, @subheading, @subsubheading. +\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} + +% These macros generate a chapter, section, etc. heading only +% (including whitespace, linebreaking, etc. around it), +% given all the information in convenient, parsed form. + +% Args are the skip and penalty (usually negative) +\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} + +% Parameter controlling skip before chapter headings (if needed) +\newskip\chapheadingskip + +% Define plain chapter starts, and page on/off switching for it. +\def\chapbreak{\dobreak \chapheadingskip {-4000}} +\def\chappager{\par\vfill\supereject} +% Because \domark is called before \chapoddpage, the filler page will +% get the headings for the next chapter, which is wrong. But we don't +% care -- we just disable all headings on the filler page. +\def\chapoddpage{% + \chappager + \ifodd\pageno \else + \begingroup + \headingsoff + \null + \chappager + \endgroup + \fi +} + +\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} + +\def\CHAPPAGoff{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chapbreak +\global\let\pagealignmacro=\chappager} + +\def\CHAPPAGon{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chappager +\global\let\pagealignmacro=\chappager +\global\def\HEADINGSon{\HEADINGSsingle}} + +\def\CHAPPAGodd{% +\global\let\contentsalignmacro = \chapoddpage +\global\let\pchapsepmacro=\chapoddpage +\global\let\pagealignmacro=\chapoddpage +\global\def\HEADINGSon{\HEADINGSdouble}} + +\CHAPPAGon + +% Chapter opening. +% +% #1 is the text, #2 is the section type (Ynumbered, Ynothing, +% Yappendix, Yomitfromtoc), #3 the chapter number. +% +% To test against our argument. +\def\Ynothingkeyword{Ynothing} +\def\Yomitfromtockeyword{Yomitfromtoc} +\def\Yappendixkeyword{Yappendix} +% +\def\chapmacro#1#2#3{% + % Insert the first mark before the heading break (see notes for \domark). + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}% + \gdef\thissection{}}% + % + \def\temptype{#2}% + \ifx\temptype\Ynothingkeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{\thischaptername}}% + \else\ifx\temptype\Yomitfromtockeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{}}% + \else\ifx\temptype\Yappendixkeyword + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\appendixletter}% + % \noexpand\putwordAppendix avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordAppendix{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \else + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\the\chapno}% + % \noexpand\putwordChapter avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordChapter{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \fi\fi\fi + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark + % + % Insert the chapter heading break. + \pchapsepmacro + % + % Now the second mark, after the heading break. No break points + % between here and the heading. + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \domark + % + {% + \chapfonts \rmisbold + % + % Have to define \lastsection before calling \donoderef, because the + % xref code eventually uses it. On the other hand, it has to be called + % after \pchapsepmacro, or the headline will change too soon. + \gdef\lastsection{#1}% + % + % Only insert the separating space if we have a chapter/appendix + % number, and don't print the unnumbered ``number''. + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unnchap}% + \else\ifx\temptype\Yomitfromtockeyword + \setbox0 = \hbox{}% contents like unnumbered, but no toc entry + \def\toctype{omit}% + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% + \def\toctype{app}% + \else + \setbox0 = \hbox{#3\enspace}% + \def\toctype{numchap}% + \fi\fi\fi + % + % Write the toc entry for this chapter. Must come before the + % \donoderef, because we include the current node name in the toc + % entry, and \donoderef resets it to empty. + \writetocentry{\toctype}{#1}{#3}% + % + % For pdftex, we have to write out the node definition (aka, make + % the pdfdest) after any page break, but before the actual text has + % been typeset. If the destination for the pdf outline is after the + % text, then jumping from the outline may wind up with the text not + % being visible, for instance under high magnification. + \donoderef{#2}% + % + % Typeset the actual heading. + \nobreak % Avoid page breaks at the interline glue. + \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe + \unhbox0 #1\par}% + }% + \nobreak\bigskip % no page break after a chapter title + \nobreak +} + +% @centerchap -- centered and unnumbered. +\let\centerparametersmaybe = \relax +\def\centerparameters{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt +} + + +% I don't think this chapter style is supported any more, so I'm not +% updating it with the new noderef stuff. We'll see. --karl, 11aug03. +% +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} +% +\def\unnchfopen #1{% + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings #1\par}% + \nobreak\bigskip\nobreak +} +\def\chfopen #1#2{\chapoddpage {\chapfonts +\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% +\par\penalty 5000 % +} +\def\centerchfopen #1{% + \chapoddpage + \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}% + \nobreak\bigskip \nobreak +} +\def\CHAPFopen{% + \global\let\chapmacro=\chfopen + \global\let\centerchapmacro=\centerchfopen} + + +% Section titles. These macros combine the section number parts and +% call the generic \sectionheading to do the printing. +% +\newskip\secheadingskip +\def\secheadingbreak{\dobreak \secheadingskip{-1000}} + +% Subsection titles. +\newskip\subsecheadingskip +\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} + +% Subsubsection titles. +\def\subsubsecheadingskip{\subsecheadingskip} +\def\subsubsecheadingbreak{\subsecheadingbreak} + + +% Print any size, any type, section title. +% +% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is +% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the +% section number. +% +\def\seckeyword{sec} +% +\def\sectionheading#1#2#3#4{% + {% + \checkenv{}% should not be in an environment. + % + % Switch to the right set of fonts. + \csname #2fonts\endcsname \rmisbold + % + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + % Insert first mark before the heading break (see notes for \domark). + \let\prevsectiondefs=\lastsectiondefs + \ifx\temptype\Ynothingkeyword + \ifx\sectionlevel\seckeyword + \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}% + \gdef\thissection{\thissectionname}}% + \fi + \else\ifx\temptype\Yomitfromtockeyword + % Don't redefine \thissection. + \else\ifx\temptype\Yappendixkeyword + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \else + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \fi\fi\fi + % + % Go into vertical mode. Usually we'll already be there, but we + % don't want the following whatsit to end up in a preceding paragraph + % if the document didn't happen to have a blank line. + \par + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark + % + % Insert space above the heading. + \csname #2headingbreak\endcsname + % + % Now the second mark, after the heading break. No break points + % between here and the heading. + \global\let\prevsectiondefs=\lastsectiondefs + \domark + % + % Only insert the space after the number if we have a section number. + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unn}% + \gdef\lastsection{#1}% + \else\ifx\temptype\Yomitfromtockeyword + % for @headings -- no section number, don't include in toc, + % and don't redefine \lastsection. + \setbox0 = \hbox{}% + \def\toctype{omit}% + \let\sectionlevel=\empty + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{#4\enspace}% + \def\toctype{app}% + \gdef\lastsection{#1}% + \else + \setbox0 = \hbox{#4\enspace}% + \def\toctype{num}% + \gdef\lastsection{#1}% + \fi\fi\fi + % + % Write the toc entry (before \donoderef). See comments in \chapmacro. + \writetocentry{\toctype\sectionlevel}{#1}{#4}% + % + % Write the node reference (= pdf destination for pdftex). + % Again, see comments in \chapmacro. + \donoderef{#3}% + % + % Interline glue will be inserted when the vbox is completed. + % That glue will be a valid breakpoint for the page, since it'll be + % preceded by a whatsit (usually from the \donoderef, or from the + % \writetocentry if there was no node). We don't want to allow that + % break, since then the whatsits could end up on page n while the + % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000. + \nobreak + % + % Output the actual section heading. + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright + \hangindent=\wd0 % zero if no section number + \unhbox0 #1}% + }% + % Add extra space after the heading -- half of whatever came above it. + % Don't allow stretch, though. + \kern .5 \csname #2headingskip\endcsname + % + % Do not let the kern be a potential breakpoint, as it would be if it + % was followed by glue. + \nobreak + % + % We'll almost certainly start a paragraph next, so don't let that + % glue accumulate. (Not a breakpoint because it's preceded by a + % discardable item.) However, when a paragraph is not started next + % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out + % or the negative glue will cause weirdly wrong output, typically + % obscuring the section heading with something else. + \vskip-\parskip + % + % This is so the last item on the main vertical list is a known + % \penalty > 10000, so \startdefun, etc., can recognize the situation + % and do the needful. + \penalty 10001 +} + + +\message{toc,} +% Table of contents. +\newwrite\tocfile + +% Write an entry to the toc file, opening it if necessary. +% Called from @chapter, etc. +% +% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} +% We append the current node name (if any) and page number as additional +% arguments for the \{chap,sec,...}entry macros which will eventually +% read this. The node name is used in the pdf outlines as the +% destination to jump to. +% +% We open the .toc file for writing here instead of at @setfilename (or +% any other fixed time) so that @contents can be anywhere in the document. +% But if #1 is `omit', then we don't do anything. This is used for the +% table of contents chapter openings themselves. +% +\newif\iftocfileopened +\def\omitkeyword{omit}% +% +\def\writetocentry#1#2#3{% + \edef\writetoctype{#1}% + \ifx\writetoctype\omitkeyword \else + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue + \fi + % + \iflinks + {\atdummies + \edef\temp{% + \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% + \temp + }% + \fi + \fi + % + % Tell \shipout to create a pdf destination on each page, if we're + % writing pdf. These are used in the table of contents. We can't + % just write one on every page because the title pages are numbered + % 1 and 2 (the page numbers aren't printed), and so are the first + % two pages of the document. Thus, we'd have two destinations named + % `1', and two named `2'. + \ifpdf \global\pdfmakepagedesttrue \fi +} + + +% These characters do not print properly in the Computer Modern roman +% fonts, so we must take special care. This is more or less redundant +% with the Texinfo input format setup at the end of this file. +% +\def\activecatcodes{% + \catcode`\"=\active + \catcode`\$=\active + \catcode`\<=\active + \catcode`\>=\active + \catcode`\\=\active + \catcode`\^=\active + \catcode`\_=\active + \catcode`\|=\active + \catcode`\~=\active +} + + +% Read the toc file, which is essentially Texinfo input. +\def\readtocfile{% + \setupdatafile + \activecatcodes + \input \tocreadfilename +} + +\newskip\contentsrightmargin \contentsrightmargin=1in +\newcount\savepageno +\newcount\lastnegativepageno \lastnegativepageno = -1 + +% Prepare to read what we've written to \tocfile. +% +\def\startcontents#1{% + % If @setchapternewpage on, and @headings double, the contents should + % start on an odd page, unlike chapters. Thus, we maintain + % \contentsalignmacro in parallel with \pagealignmacro. + % From: Torbjorn Granlund + \contentsalignmacro + \immediate\closeout\tocfile + % + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \chapmacro{#1}{Yomitfromtoc}{}% + % + \savepageno = \pageno + \begingroup % Set up to handle contents files properly. + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi +} + +% redefined for the two-volume lispref. We always output on +% \jobname.toc even if this is redefined. +% +\def\tocreadfilename{\jobname.toc} + +% Normal (long) toc. +% +\def\contents{% + \startcontents{\putwordTOC}% + \openin 1 \tocreadfilename\space + \ifeof 1 \else + \readtocfile + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \ifeof 1 \else + \pdfmakeoutlines + \fi + \closein 1 + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} + +% And just the chapters. +\def\summarycontents{% + \startcontents{\putwordShortTOC}% + % + \let\partentry = \shortpartentry + \let\numchapentry = \shortchapentry + \let\appentry = \shortchapentry + \let\unnchapentry = \shortunnchapentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf + \let\sl=\shortcontsl \let\tt=\shortconttt + \rm + \hyphenpenalty = 10000 + \advance\baselineskip by 1pt % Open it up a little. + \def\numsecentry##1##2##3##4{} + \let\appsecentry = \numsecentry + \let\unnsecentry = \numsecentry + \let\numsubsecentry = \numsecentry + \let\appsubsecentry = \numsecentry + \let\unnsubsecentry = \numsecentry + \let\numsubsubsecentry = \numsecentry + \let\appsubsubsecentry = \numsecentry + \let\unnsubsubsecentry = \numsecentry + \openin 1 \tocreadfilename\space + \ifeof 1 \else + \readtocfile + \fi + \closein 1 + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} +\let\shortcontents = \summarycontents + +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g., `A' for an appendix, or `3' for a chapter. +% +\def\shortchaplabel#1{% + % This space should be enough, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in by \shortchapentry above.) + % + % We'd like to right-justify chapter numbers, but that looks strange + % with appendix letters. And right-justifying numbers and + % left-justifying letters looks strange when there is less than 10 + % chapters. Have to read the whole toc once to know how many chapters + % there are before deciding ... + \hbox to 1em{#1\hss}% +} + +% These macros generate individual entries in the table of contents. +% The first argument is the chapter or section name. +% The last argument is the page number. +% The arguments in between are the chapter number, section number, ... + +% Parts, in the main contents. Replace the part number, which doesn't +% exist, with an empty box. Let's hope all the numbers have the same width. +% Also ignore the page number, which is conventionally not printed. +\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}} +\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}} +% +% Parts, in the short toc. +\def\shortpartentry#1#2#3#4{% + \penalty-300 + \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip + \shortchapentry{{\bf #1}}{\numeralbox}{}{}% +} + +% Chapters, in the main contents. +\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} +% +% Chapters, in the short toc. +% See comments in \dochapentry re vbox and related settings. +\def\shortchapentry#1#2#3#4{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% +} + +% Appendices, in the main contents. +% Need the word Appendix, and a fixed-size box. +% +\def\appendixbox#1{% + % We use M since it's probably the widest letter. + \setbox0 = \hbox{\putwordAppendix{} M}% + \hbox to \wd0{\putwordAppendix{} #1\hss}} +% +\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} + +% Unnumbered chapters. +\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} +\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} + +% Sections. +\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} +\let\appsecentry=\numsecentry +\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} + +% Subsections. +\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} +\let\appsubsecentry=\numsubsecentry +\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} + +% And subsubsections. +\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} +\let\appsubsubsecentry=\numsubsubsecentry +\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} + +% This parameter controls the indentation of the various levels. +% Same as \defaultparindent. +\newdimen\tocindent \tocindent = 15pt + +% Now for the actual typesetting. In all these, #1 is the text and #2 is the +% page number. +% +% If the toc has to be broken over pages, we want it to be at chapters +% if at all possible; hence the \penalty. +\def\dochapentry#1#2{% + \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip + \begingroup + \chapentryfonts + \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \endgroup + \nobreak\vskip .25\baselineskip plus.1\baselineskip +} + +\def\dosecentry#1#2{\begingroup + \secentryfonts \leftskip=\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsecentry#1#2{\begingroup + \subsecentryfonts \leftskip=2\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsubsecentry#1#2{\begingroup + \subsubsecentryfonts \leftskip=3\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +% We use the same \entry macro as for the index entries. +\let\tocentry = \entry + +% Space between chapter (or whatever) number and the title. +\def\labelspace{\hskip1em \relax} + +\def\dopageno#1{{\rm #1}} +\def\doshortpageno#1{{\rm #1}} + +\def\chapentryfonts{\secfonts \rm} +\def\secentryfonts{\textfonts} +\def\subsecentryfonts{\textfonts} +\def\subsubsecentryfonts{\textfonts} + + +\message{environments,} +% @foo ... @end foo. + +% @tex ... @end tex escapes into raw TeX temporarily. +% One exception: @ is still an escape character, so that @end tex works. +% But \@ or @@ will get a plain @ character. + +\envdef\tex{% + \setupmarkupstyle{tex}% + \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 + \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 + \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie + \catcode `\%=14 + \catcode `\+=\other + \catcode `\"=\other + \catcode `\|=\other + \catcode `\<=\other + \catcode `\>=\other + \catcode `\`=\other + \catcode `\'=\other + \escapechar=`\\ + % + % ' is active in math mode (mathcode"8000). So reset it, and all our + % other math active characters (just in case), to plain's definitions. + \mathactive + % + \let\b=\ptexb + \let\bullet=\ptexbullet + \let\c=\ptexc + \let\,=\ptexcomma + \let\.=\ptexdot + \let\dots=\ptexdots + \let\equiv=\ptexequiv + \let\!=\ptexexclam + \let\i=\ptexi + \let\indent=\ptexindent + \let\noindent=\ptexnoindent + \let\{=\ptexlbrace + \let\+=\tabalign + \let\}=\ptexrbrace + \let\/=\ptexslash + \let\*=\ptexstar + \let\t=\ptext + \expandafter \let\csname top\endcsname=\ptextop % we've made it outer + \let\frenchspacing=\plainfrenchspacing + % + \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% + \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% + \def\@{@}% +} +% There is no need to define \Etex. + +% Define @lisp ... @end lisp. +% @lisp environment forms a group so it can rebind things, +% including the definition of @end lisp (which normally is erroneous). + +% Amount to narrow the margins by for @lisp. +\newskip\lispnarrowing \lispnarrowing=0.4in + +% This is the definition that ^^M gets inside @lisp, @example, and other +% such environments. \null is better than a space, since it doesn't +% have any width. +\def\lisppar{\null\endgraf} + +% This space is always present above and below environments. +\newskip\envskipamount \envskipamount = 0pt + +% Make spacing and below environment symmetrical. We use \parskip here +% to help in doing that, since in @example-like environments \parskip +% is reset to zero; thus the \afterenvbreak inserts no space -- but the +% start of the next paragraph will insert \parskip. +% +\def\aboveenvbreak{{% + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. + \ifnum \lastpenalty=10000 \else + \advance\envskipamount by \parskip + \endgraf + \ifdim\lastskip<\envskipamount + \removelastskip + % it's not a good place to break if the last penalty was \nobreak + % or better ... + \ifnum\lastpenalty<10000 \penalty-50 \fi + \vskip\envskipamount + \fi + \fi +}} + +\let\afterenvbreak = \aboveenvbreak + +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will +% also clear it, so that its embedded environments do the narrowing again. +\let\nonarrowing=\relax + +% @cartouche ... @end cartouche: draw rectangle w/rounded corners around +% environment contents. +\font\circle=lcircle10 +\newdimen\circthick +\newdimen\cartouter\newdimen\cartinner +\newskip\normbskip\newskip\normpskip\newskip\normlskip +\circthick=\fontdimen8\circle +% +\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth +\def\ctr{{\hskip 6pt\circle\char'010}} +\def\cbl{{\circle\char'012\hskip -6pt}} +\def\cbr{{\hskip 6pt\circle\char'011}} +\def\carttop{\hbox to \cartouter{\hskip\lskip + \ctl\leaders\hrule height\circthick\hfil\ctr + \hskip\rskip}} +\def\cartbot{\hbox to \cartouter{\hskip\lskip + \cbl\leaders\hrule height\circthick\hfil\cbr + \hskip\rskip}} +% +\newskip\lskip\newskip\rskip + +\envdef\cartouche{% + \ifhmode\par\fi % can't be in the midst of a paragraph. + \startsavinginserts + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt % we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18.4pt % allow for 3pt kerns on either + % side, and for 6pt waste from + % each corner char, and rule thickness + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing = t% + % + % If this cartouche directly follows a sectioning command, we need the + % \parskip glue (backspaced over by default) or the cartouche can + % collide with the section heading. + \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi + % + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \kern3pt + \hsize=\cartinner + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip + \comment % For explanation, see the end of def\group. +} +\def\Ecartouche{% + \ifhmode\par\fi + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup + \checkinserts +} + + +% This macro is called at the beginning of all the @example variants, +% inside a group. +\newdimen\nonfillparindent +\def\nonfillstart{% + \aboveenvbreak + \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy + \sepspaces % Make spaces be word-separators rather than space tokens. + \let\par = \lisppar % don't ignore blank lines + \obeylines % each line of input is a line of output + \parskip = 0pt + % Turn off paragraph indentation but redefine \indent to emulate + % the normal \indent. + \nonfillparindent=\parindent + \parindent = 0pt + \let\indent\nonfillindent + % + \emergencystretch = 0pt % don't try to avoid overfull boxes + \ifx\nonarrowing\relax + \advance \leftskip by \lispnarrowing + \exdentamount=\lispnarrowing + \else + \let\nonarrowing = \relax + \fi + \let\exdent=\nofillexdent +} + +\begingroup +\obeyspaces +% We want to swallow spaces (but not other tokens) after the fake +% @indent in our nonfill-environments, where spaces are normally +% active and set to @tie, resulting in them not being ignored after +% @indent. +\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}% +\gdef\nonfillindentcheck{% +\ifx\temp % +\expandafter\nonfillindentgobble% +\else% +\leavevmode\nonfillindentbox% +\fi% +}% +\endgroup +\def\nonfillindentgobble#1{\nonfillindent} +\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}} + +% If you want all examples etc. small: @set dispenvsize small. +% If you want even small examples the full size: @set dispenvsize nosmall. +% This affects the following displayed environments: +% @example, @display, @format, @lisp +% +\def\smallword{small} +\def\nosmallword{nosmall} +\let\SETdispenvsize\relax +\def\setnormaldispenv{% + \ifx\SETdispenvsize\smallword + % end paragraph for sake of leading, in case document has no blank + % line. This is redundant with what happens in \aboveenvbreak, but + % we need to do it before changing the fonts, and it's inconvenient + % to change the fonts afterward. + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} +\def\setsmalldispenv{% + \ifx\SETdispenvsize\nosmallword + \else + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} + +% We often define two environments, @foo and @smallfoo. +% Let's do it in one command. #1 is the env name, #2 the definition. +\def\makedispenvdef#1#2{% + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}% + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}% + \expandafter\let\csname E#1\endcsname \afterenvbreak + \expandafter\let\csname Esmall#1\endcsname \afterenvbreak +} + +% Define two environment synonyms (#1 and #2) for an environment. +\def\maketwodispenvdef#1#2#3{% + \makedispenvdef{#1}{#3}% + \makedispenvdef{#2}{#3}% +} +% +% @lisp: indented, narrowed, typewriter font; +% @example: same as @lisp. +% +% @smallexample and @smalllisp: use smaller fonts. +% Originally contributed by Pavel@xerox. +% +\maketwodispenvdef{lisp}{example}{% + \nonfillstart + \tt\setupmarkupstyle{example}% + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return +} +% @display/@smalldisplay: same as @lisp except keep current font. +% +\makedispenvdef{display}{% + \nonfillstart + \gobble +} + +% @format/@smallformat: same as @display except don't narrow margins. +% +\makedispenvdef{format}{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} + +% @flushleft: same as @format, but doesn't obey \SETdispenvsize. +\envdef\flushleft{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} +\let\Eflushleft = \afterenvbreak + +% @flushright. +% +\envdef\flushright{% + \let\nonarrowing = t% + \nonfillstart + \advance\leftskip by 0pt plus 1fill\relax + \gobble +} +\let\Eflushright = \afterenvbreak + + +% @raggedright does more-or-less normal line breaking but no right +% justification. From plain.tex. +\envdef\raggedright{% + \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax +} +\let\Eraggedright\par + +\envdef\raggedleft{% + \parindent=0pt \leftskip0pt plus2em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedleft\par + +\envdef\raggedcenter{% + \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedcenter\par + + +% @quotation does normal linebreaking (hence we can't use \nonfillstart) +% and narrows the margins. We keep \parskip nonzero in general, since +% we're doing normal filling. So, when using \aboveenvbreak and +% \afterenvbreak, temporarily make \parskip 0. +% +\makedispenvdef{quotation}{\quotationstart} +% +\def\quotationstart{% + \indentedblockstart % same as \indentedblock, but increase right margin too. + \ifx\nonarrowing\relax + \advance\rightskip by \lispnarrowing + \fi + \parsearg\quotationlabel +} + +% We have retained a nonzero parskip for the environment, since we're +% doing normal filling. +% +\def\Equotation{% + \par + \ifx\quotationauthor\thisisundefined\else + % indent a bit. + \leftline{\kern 2\leftskip \sl ---\quotationauthor}% + \fi + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallquotation{\Equotation} + +% If we're given an argument, typeset it in bold with a colon after. +\def\quotationlabel#1{% + \def\temp{#1}% + \ifx\temp\empty \else + {\bf #1: }% + \fi +} + +% @indentedblock is like @quotation, but indents only on the left and +% has no optional argument. +% +\makedispenvdef{indentedblock}{\indentedblockstart} +% +\def\indentedblockstart{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi +} + +% Keep a nonzero parskip for the environment, since we're doing normal filling. +% +\def\Eindentedblock{% + \par + {\parskip=0pt \afterenvbreak}% +} +\def\Esmallindentedblock{\Eindentedblock} + + +% LaTeX-like @verbatim...@end verbatim and @verb{...} +% If we want to allow any as delimiter, +% we need the curly braces so that makeinfo sees the @verb command, eg: +% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org +% +% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook. +% +% [Knuth] p.344; only we need to do the other characters Texinfo sets +% active too. Otherwise, they get lost as the first character on a +% verbatim line. +\def\dospecials{% + \do\ \do\\\do\{\do\}\do\$\do\&% + \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% + \do\<\do\>\do\|\do\@\do+\do\"% + % Don't do the quotes -- if we do, @set txicodequoteundirected and + % @set txicodequotebacktick will not have effect on @verb and + % @verbatim, and ?` and !` ligatures won't get disabled. + %\do\`\do\'% +} +% +% [Knuth] p. 380 +\def\uncatcodespecials{% + \def\do##1{\catcode`##1=\other}\dospecials} +% +% Setup for the @verb command. +% +% Eight spaces for a tab +\begingroup + \catcode`\^^I=\active + \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }} +\endgroup +% +\def\setupverb{% + \tt % easiest (and conventionally used) font for verbatim + \def\par{\leavevmode\endgraf}% + \setupmarkupstyle{verb}% + \tabeightspaces + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces +} + +% Setup for the @verbatim environment +% +% Real tab expansion. +\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount +% +% We typeset each line of the verbatim in an \hbox, so we can handle +% tabs. The \global is in case the verbatim line starts with an accent, +% or some other command that starts with a begin-group. Otherwise, the +% entire \verbbox would disappear at the corresponding end-group, before +% it is typeset. Meanwhile, we can't have nested verbatim commands +% (can we?), so the \global won't be overwriting itself. +\newbox\verbbox +\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup} +% +\begingroup + \catcode`\^^I=\active + \gdef\tabexpand{% + \catcode`\^^I=\active + \def^^I{\leavevmode\egroup + \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab + \divide\dimen\verbbox by\tabw + \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw + \advance\dimen\verbbox by\tabw % advance to next multiple of \tabw + \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox + }% + } +\endgroup + +% start the verbatim environment. +\def\setupverbatim{% + \let\nonarrowing = t% + \nonfillstart + \tt % easiest (and conventionally used) font for verbatim + % The \leavevmode here is for blank lines. Otherwise, we would + % never \starttabox and the \egroup would end verbatim mode. + \def\par{\leavevmode\egroup\box\verbbox\endgraf}% + \tabexpand + \setupmarkupstyle{verbatim}% + % Respect line breaks, + % print special symbols as themselves, and + % make each space count. + % Must do in this order: + \obeylines \uncatcodespecials \sepspaces + \everypar{\starttabbox}% +} + +% Do the @verb magic: verbatim text is quoted by unique +% delimiter characters. Before first delimiter expect a +% right brace, after last delimiter expect closing brace: +% +% \def\doverb'{'#1'}'{#1} +% +% [Knuth] p. 382; only eat outer {} +\begingroup + \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other + \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] +\endgroup +% +\def\verb{\begingroup\setupverb\doverb} +% +% +% Do the @verbatim magic: define the macro \doverbatim so that +% the (first) argument ends when '@end verbatim' is reached, ie: +% +% \def\doverbatim#1@end verbatim{#1} +% +% For Texinfo it's a lot easier than for LaTeX, +% because texinfo's \verbatim doesn't stop at '\end{verbatim}': +% we need not redefine '\', '{' and '}'. +% +% Inspired by LaTeX's verbatim command set [latex.ltx] +% +\begingroup + \catcode`\ =\active + \obeylines % + % ignore everything up to the first ^^M, that's the newline at the end + % of the @verbatim input line itself. Otherwise we get an extra blank + % line in the output. + \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% + % We really want {...\end verbatim} in the body of the macro, but + % without the active space; thus we have to use \xdef and \gobble. +\endgroup +% +\envdef\verbatim{% + \setupverbatim\doverbatim +} +\let\Everbatim = \afterenvbreak + + +% @verbatiminclude FILE - insert text of file in verbatim environment. +% +\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} +% +\def\doverbatiminclude#1{% + {% + \makevalueexpandable + \setupverbatim + \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% + \input #1 + \afterenvbreak + }% +} + +% @copying ... @end copying. +% Save the text away for @insertcopying later. +% +% We save the uninterpreted tokens, rather than creating a box. +% Saving the text in a box would be much easier, but then all the +% typesetting commands (@smallbook, font changes, etc.) have to be done +% beforehand -- and a) we want @copying to be done first in the source +% file; b) letting users define the frontmatter in as flexible order as +% possible is very desirable. +% +\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} +\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} +% +\def\insertcopying{% + \begingroup + \parindent = 0pt % paragraph indentation looks wrong on title page + \scanexp\copyingtext + \endgroup +} + + +\message{defuns,} +% @defun etc. + +\newskip\defbodyindent \defbodyindent=.4in +\newskip\defargsindent \defargsindent=50pt +\newskip\deflastargmargin \deflastargmargin=18pt +\newcount\defunpenalty + +% Start the processing of @deffn: +\def\startdefun{% + \ifnum\lastpenalty<10000 + \medbreak + \defunpenalty=10003 % Will keep this @deffn together with the + % following @def command, see below. + \else + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we need to allow a + % break somewhere. Check specifically for penalty 10002, inserted + % by \printdefunline, instead of 10000, since the sectioning + % commands also insert a nobreak penalty, and we don't want to allow + % a break between a section heading and a defun. + % + % As a further refinement, we avoid "club" headers by signalling + % with penalty of 10003 after the very first @deffn in the + % sequence (see above), and penalty of 10002 after any following + % @def command. + \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi + % + % Similarly, after a section heading, do not allow a break. + % But do insert the glue. + \medskip % preceded by discardable penalty, so not a breakpoint + \fi + % + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent +} + +\def\dodefunx#1{% + % First, check whether we are in the right environment: + \checkenv#1% + % + % As above, allow line break if we have multiple x headers in a row. + % It's not a great place, though. + \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi + % + % And now, it's time to reuse the body of the original defun: + \expandafter\gobbledefun#1% +} +\def\gobbledefun#1\startdefun{} + +% \printdefunline \deffnheader{text} +% +\def\printdefunline#1#2{% + \begingroup + % call \deffnheader: + #1#2 \endheader + % common ending: + \interlinepenalty = 10000 + \advance\rightskip by 0pt plus 1fil\relax + \endgraf + \nobreak\vskip -\parskip + \penalty\defunpenalty % signal to \startdefun and \dodefunx + % Some of the @defun-type tags do not enable magic parentheses, + % rendering the following check redundant. But we don't optimize. + \checkparencounts + \endgroup +} + +\def\Edefun{\endgraf\medbreak} + +% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; +% the only thing remaining is to define \deffnheader. +% +\def\makedefun#1{% + \expandafter\let\csname E#1\endcsname = \Edefun + \edef\temp{\noexpand\domakedefun + \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% + \temp +} + +% \domakedefun \deffn \deffnx \deffnheader +% +% Define \deffn and \deffnx, without parameters. +% \deffnheader has to be defined explicitly. +% +\def\domakedefun#1#2#3{% + \envdef#1{% + \startdefun + \doingtypefnfalse % distinguish typed functions from all else + \parseargusing\activeparens{\printdefunline#3}% + }% + \def#2{\dodefunx#1}% + \def#3% +} + +\newif\ifdoingtypefn % doing typed function? +\newif\ifrettypeownline % typeset return type on its own line? + +% @deftypefnnewline on|off says whether the return type of typed functions +% are printed on their own line. This affects @deftypefn, @deftypefun, +% @deftypeop, and @deftypemethod. +% +\parseargdef\deftypefnnewline{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @txideftypefnnl value `\temp', + must be on|off}% + \fi\fi +} + +% Untyped functions: + +% @deffn category name args +\makedefun{deffn}{\deffngeneral{}} + +% @deffn category class name args +\makedefun{defop}#1 {\defopon{#1\ \putwordon}} + +% \defopon {category on}class name args +\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deffngeneral {subind}category name args +% +\def\deffngeneral#1#2 #3 #4\endheader{% + % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. + \dosubind{fn}{\code{#3}}{#1}% + \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% +} + +% Typed functions: + +% @deftypefn category type name args +\makedefun{deftypefn}{\deftypefngeneral{}} + +% @deftypeop category class type name args +\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} + +% \deftypeopon {category on}class type name args +\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deftypefngeneral {subind}category type name args +% +\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% + \dosubind{fn}{\code{#4}}{#1}% + \doingtypefntrue + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +% Typed variables: + +% @deftypevr category type var args +\makedefun{deftypevr}{\deftypecvgeneral{}} + +% @deftypecv category class type var args +\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} + +% \deftypecvof {category of}class type var args +\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } + +% \deftypecvgeneral {subind}category type var args +% +\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% + \dosubind{vr}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +% Untyped variables: + +% @defvr category var args +\makedefun{defvr}#1 {\deftypevrheader{#1} {} } + +% @defcv category class var args +\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} + +% \defcvof {category of}class var args +\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } + +% Types: + +% @deftp category name args +\makedefun{deftp}#1 #2 #3\endheader{% + \doind{tp}{\code{#2}}% + \defname{#1}{}{#2}\defunargs{#3\unskip}% +} + +% Remaining @defun-like shortcuts: +\makedefun{defun}{\deffnheader{\putwordDeffunc} } +\makedefun{defmac}{\deffnheader{\putwordDefmac} } +\makedefun{defspec}{\deffnheader{\putwordDefspec} } +\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } +\makedefun{defvar}{\defvrheader{\putwordDefvar} } +\makedefun{defopt}{\defvrheader{\putwordDefopt} } +\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } +\makedefun{defmethod}{\defopon\putwordMethodon} +\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} +\makedefun{defivar}{\defcvof\putwordInstanceVariableof} +\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} + +% \defname, which formats the name of the @def (not the args). +% #1 is the category, such as "Function". +% #2 is the return type, if any. +% #3 is the function name. +% +% We are followed by (but not passed) the arguments, if any. +% +\def\defname#1#2#3{% + \par + % Get the values of \leftskip and \rightskip as they were outside the @def... + \advance\leftskip by -\defbodyindent + % + % Determine if we are typesetting the return type of a typed function + % on a line by itself. + \rettypeownlinefalse + \ifdoingtypefn % doing a typed function specifically? + % then check user option for putting return type on its own line: + \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else + \rettypeownlinetrue + \fi + \fi + % + % How we'll format the category name. Putting it in brackets helps + % distinguish it from the body text that may end up on the next line + % just below it. + \def\temp{#1}% + \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} + % + % Figure out line sizes for the paragraph shape. We'll always have at + % least two. + \tempnum = 2 + % + % The first line needs space for \box0; but if \rightskip is nonzero, + % we need only space for the part of \box0 which exceeds it: + \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % + % If doing a return type on its own line, we'll have another line. + \ifrettypeownline + \advance\tempnum by 1 + \def\maybeshapeline{0in \hsize}% + \else + \def\maybeshapeline{}% + \fi + % + % The continuations: + \dimen2=\hsize \advance\dimen2 by -\defargsindent + % + % The final paragraph shape: + \parshape \tempnum 0in \dimen0 \maybeshapeline \defargsindent \dimen2 + % + % Put the category name at the right margin. + \noindent + \hbox to 0pt{% + \hfil\box0 \kern-\hsize + % \hsize has to be shortened this way: + \kern\leftskip + % Intentionally do not respect \rightskip, since we need the space. + }% + % + % Allow all lines to be underfull without complaint: + \tolerance=10000 \hbadness=10000 + \exdentamount=\defbodyindent + {% + % defun fonts. We use typewriter by default (used to be bold) because: + % . we're printing identifiers, they should be in tt in principle. + % . in languages with many accents, such as Czech or French, it's + % common to leave accents off identifiers. The result looks ok in + % tt, but exceedingly strange in rm. + % . we don't want -- and --- to be treated as ligatures. + % . this still does not fix the ?` and !` ligatures, but so far no + % one has made identifiers using them :). + \df \tt + \def\temp{#2}% text of the return type + \ifx\temp\empty\else + \tclose{\temp}% typeset the return type + \ifrettypeownline + % put return type on its own line; prohibit line break following: + \hfil\vadjust{\nobreak}\break + \else + \space % type on same line, so just followed by a space + \fi + \fi % no return type + #3% output function name + }% + {\rm\enskip}% hskip 0.5 em of \tenrm + % + \boldbrax + % arguments will be output next, if any. +} + +% Print arguments in slanted roman (not ttsl), inconsistently with using +% tt for the name. This is because literal text is sometimes needed in +% the argument list (groff manual), and ttsl and tt are not very +% distinguishable. Prevent hyphenation at `-' chars. +% +\def\defunargs#1{% + % use sl by default (not ttsl), + % tt for the names. + \df \sl \hyphenchar\font=0 + % + % On the other hand, if an argument has two dashes (for instance), we + % want a way to get ttsl. We used to recommend @var for that, so + % leave the code in, but it's strange for @var to lead to typewriter. + % Nowadays we recommend @code, since the difference between a ttsl hyphen + % and a tt hyphen is pretty tiny. @code also disables ?` !`. + \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% + #1% + \sl\hyphenchar\font=45 +} + +% We want ()&[] to print specially on the defun line. +% +\def\activeparens{% + \catcode`\(=\active \catcode`\)=\active + \catcode`\[=\active \catcode`\]=\active + \catcode`\&=\active +} + +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) + +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +{ + \activeparens + \global\let(=\lparen \global\let)=\rparen + \global\let[=\lbrack \global\let]=\rbrack + \global\let& = \& + + \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} + \gdef\magicamp{\let&=\amprm} +} + +\newcount\parencount + +% If we encounter &foo, then turn on ()-hacking afterwards +\newif\ifampseen +\def\amprm#1 {\ampseentrue{\bf\ }} + +\def\parenfont{% + \ifampseen + % At the first level, print parens in roman, + % otherwise use the default font. + \ifnum \parencount=1 \rm \fi + \else + % The \sf parens (in \boldbrax) actually are a little bolder than + % the contained text. This is especially needed for [ and ] . + \sf + \fi +} +\def\infirstlevel#1{% + \ifampseen + \ifnum\parencount=1 + #1% + \fi + \fi +} +\def\bfafterword#1 {#1 \bf} + +\def\opnr{% + \global\advance\parencount by 1 + {\parenfont(}% + \infirstlevel \bfafterword +} +\def\clnr{% + {\parenfont)}% + \infirstlevel \sl + \global\advance\parencount by -1 +} + +\newcount\brackcount +\def\lbrb{% + \global\advance\brackcount by 1 + {\bf[}% +} +\def\rbrb{% + {\bf]}% + \global\advance\brackcount by -1 +} + +\def\checkparencounts{% + \ifnum\parencount=0 \else \badparencount \fi + \ifnum\brackcount=0 \else \badbrackcount \fi +} +% these should not use \errmessage; the glibc manual, at least, actually +% has such constructs (when documenting function pointers). +\def\badparencount{% + \message{Warning: unbalanced parentheses in @def...}% + \global\parencount=0 +} +\def\badbrackcount{% + \message{Warning: unbalanced square brackets in @def...}% + \global\brackcount=0 +} + + +\message{macros,} +% @macro. + +% To do this right we need a feature of e-TeX, \scantokens, +% which we arrange to emulate with a temporary file in ordinary TeX. +\ifx\eTeXversion\thisisundefined + \newwrite\macscribble + \def\scantokens#1{% + \toks0={#1}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \input \jobname.tmp + } +\fi + +\def\scanmacro#1{\begingroup + \newlinechar`\^^M + \let\xeatspaces\eatspaces + % + % Undo catcode changes of \startcontents and \doprintindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ + % + % ... and for \example: + \spaceisspace + % + % The \empty here causes a following catcode 5 newline to be eaten as + % part of reading whitespace after a control sequence. It does not + % eat a catcode 13 newline. There's no good way to handle the two + % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX + % would then have different behavior). See the Macro Details node in + % the manual for the workaround we recommend for macros and + % line-oriented commands. + % + \scantokens{#1\empty}% +\endgroup} + +\def\scanexp#1{% + \edef\temp{\noexpand\scanmacro{#1}}% + \temp +} + +\newcount\paramno % Count of parameters +\newtoks\macname % Macro name +\newif\ifrecursive % Is it recursive? + +% List of all defined macros in the form +% \definedummyword\macro1\definedummyword\macro2... +% Currently is also contains all @aliases; the list can be split +% if there is a need. +\def\macrolist{} + +% Add the macro to \macrolist +\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname} +\def\addtomacrolistxxx#1{% + \toks0 = \expandafter{\macrolist\definedummyword#1}% + \xdef\macrolist{\the\toks0}% +} + +% Utility routines. +% This does \let #1 = #2, with \csnames; that is, +% \let \csname#1\endcsname = \csname#2\endcsname +% (except of course we have to play expansion games). +% +\def\cslet#1#2{% + \expandafter\let + \csname#1\expandafter\endcsname + \csname#2\endcsname +} + +% Trim leading and trailing spaces off a string. +% Concepts from aro-bend problem 15 (see CTAN). +{\catcode`\@=11 +\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} +\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} +\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} +\def\unbrace#1{#1} +\unbrace{\gdef\trim@@@ #1 } #2@{#1} +} + +% Trim a single trailing ^^M off a string. +{\catcode`\^^M=\other \catcode`\Q=3% +\gdef\eatcr #1{\eatcra #1Q^^MQ}% +\gdef\eatcra#1^^MQ{\eatcrb#1Q}% +\gdef\eatcrb#1Q#2Q{#1}% +} + +% Macro bodies are absorbed as an argument in a context where +% all characters are catcode 10, 11 or 12, except \ which is active +% (as in normal texinfo). It is necessary to change the definition of \ +% to recognize macro arguments; this is the job of \mbodybackslash. +% +% Non-ASCII encodings make 8-bit characters active, so un-activate +% them to avoid their expansion. Must do this non-globally, to +% confine the change to the current group. +% +% It's necessary to have hard CRs when the macro is executed. This is +% done by making ^^M (\endlinechar) catcode 12 when reading the macro +% body, and then making it the \newlinechar in \scanmacro. +% +\def\scanctxt{% used as subroutine + \catcode`\"=\other + \catcode`\+=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\@=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\~=\other + \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi +} + +\def\scanargctxt{% used for copying and captions, not macros. + \scanctxt + \catcode`\\=\other + \catcode`\^^M=\other +} + +\def\macrobodyctxt{% used for @macro definitions + \scanctxt + \catcode`\{=\other + \catcode`\}=\other + \catcode`\^^M=\other + \usembodybackslash +} + +\def\macroargctxt{% used when scanning invocations + \scanctxt + \catcode`\\=0 +} +% why catcode 0 for \ in the above? To recognize \\ \{ \} as "escapes" +% for the single characters \ { }. Thus, we end up with the "commands" +% that would be written @\ @{ @} in a Texinfo document. +% +% We already have @{ and @}. For @\, we define it here, and only for +% this purpose, to produce a typewriter backslash (so, the @\ that we +% define for @math can't be used with @macro calls): +% +\def\\{\normalbackslash}% +% +% We would like to do this for \, too, since that is what makeinfo does. +% But it is not possible, because Texinfo already has a command @, for a +% cedilla accent. Documents must use @comma{} instead. +% +% \anythingelse will almost certainly be an error of some kind. + + +% \mbodybackslash is the definition of \ in @macro bodies. +% It maps \foo\ => \csname macarg.foo\endcsname => #N +% where N is the macro parameter number. +% We define \csname macarg.\endcsname to be \realbackslash, so +% \\ in macro replacement text gets you a backslash. +% +{\catcode`@=0 @catcode`@\=@active + @gdef@usembodybackslash{@let\=@mbodybackslash} + @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} +} +\expandafter\def\csname macarg.\endcsname{\realbackslash} + +\def\margbackslash#1{\char`\#1 } + +\def\macro{\recursivefalse\parsearg\macroxxx} +\def\rmacro{\recursivetrue\parsearg\macroxxx} + +\def\macroxxx#1{% + \getargs{#1}% now \macname is the macname and \argl the arglist + \ifx\argl\empty % no arguments + \paramno=0\relax + \else + \expandafter\parsemargdef \argl;% + \if\paramno>256\relax + \ifx\eTeXversion\thisisundefined + \errhelp = \EMsimple + \errmessage{You need eTeX to compile a file with macros with more than 256 arguments} + \fi + \fi + \fi + \if1\csname ismacro.\the\macname\endcsname + \message{Warning: redefining \the\macname}% + \else + \expandafter\ifx\csname \the\macname\endcsname \relax + \else \errmessage{Macro name \the\macname\space already defined}\fi + \global\cslet{macsave.\the\macname}{\the\macname}% + \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% + \addtomacrolist{\the\macname}% + \fi + \begingroup \macrobodyctxt + \ifrecursive \expandafter\parsermacbody + \else \expandafter\parsemacbody + \fi} + +\parseargdef\unmacro{% + \if1\csname ismacro.#1\endcsname + \global\cslet{#1}{macsave.#1}% + \global\expandafter\let \csname ismacro.#1\endcsname=0% + % Remove the macro name from \macrolist: + \begingroup + \expandafter\let\csname#1\endcsname \relax + \let\definedummyword\unmacrodo + \xdef\macrolist{\macrolist}% + \endgroup + \else + \errmessage{Macro #1 not defined}% + \fi +} + +% Called by \do from \dounmacro on each macro. The idea is to omit any +% macro definitions that have been changed to \relax. +% +\def\unmacrodo#1{% + \ifx #1\relax + % remove this + \else + \noexpand\definedummyword \noexpand#1% + \fi +} + +% This makes use of the obscure feature that if the last token of a +% is #, then the preceding argument is delimited by +% an opening brace, and that opening brace is not consumed. +\def\getargs#1{\getargsxxx#1{}} +\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} +\def\getmacname#1 #2\relax{\macname={#1}} +\def\getmacargs#1{\def\argl{#1}} + +% For macro processing make @ a letter so that we can make Texinfo private macro names. +\edef\texiatcatcode{\the\catcode`\@} +\catcode `@=11\relax + +% Parse the optional {params} list. Set up \paramno and \paramlist +% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH +% in the params list to some hook where the argument si to be expanded. If +% there are less than 10 arguments that hook is to be replaced by ##N where N +% is the position in that list, that is to say the macro arguments are to be +% defined `a la TeX in the macro body. +% +% That gets used by \mbodybackslash (above). +% +% We need to get `macro parameter char #' into several definitions. +% The technique used is stolen from LaTeX: let \hash be something +% unexpandable, insert that wherever you need a #, and then redefine +% it to # just before using the token list produced. +% +% The same technique is used to protect \eatspaces till just before +% the macro is used. +% +% If there are 10 or more arguments, a different technique is used, where the +% hook remains in the body, and when macro is to be expanded the body is +% processed again to replace the arguments. +% +% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the +% argument N value and then \edef the body (nothing else will expand because of +% the catcode regime underwhich the body was input). +% +% If you compile with TeX (not eTeX), and you have macros with 10 or more +% arguments, you need that no macro has more than 256 arguments, otherwise an +% error is produced. +\def\parsemargdef#1;{% + \paramno=0\def\paramlist{}% + \let\hash\relax + \let\xeatspaces\relax + \parsemargdefxxx#1,;,% + % In case that there are 10 or more arguments we parse again the arguments + % list to set new definitions for the \macarg.BLAH macros corresponding to + % each BLAH argument. It was anyhow needed to parse already once this list + % in order to count the arguments, and as macros with at most 9 arguments + % are by far more frequent than macro with 10 or more arguments, defining + % twice the \macarg.BLAH macros does not cost too much processing power. + \ifnum\paramno<10\relax\else + \paramno0\relax + \parsemmanyargdef@@#1,;,% 10 or more arguments + \fi +} +\def\parsemargdefxxx#1,{% + \if#1;\let\next=\relax + \else \let\next=\parsemargdefxxx + \advance\paramno by 1 + \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname + {\xeatspaces{\hash\the\paramno}}% + \edef\paramlist{\paramlist\hash\the\paramno,}% + \fi\next} + +\def\parsemmanyargdef@@#1,{% + \if#1;\let\next=\relax + \else + \let\next=\parsemmanyargdef@@ + \edef\tempb{\eatspaces{#1}}% + \expandafter\def\expandafter\tempa + \expandafter{\csname macarg.\tempb\endcsname}% + % Note that we need some extra \noexpand\noexpand, this is because we + % don't want \the to be expanded in the \parsermacbody as it uses an + % \xdef . + \expandafter\edef\tempa + {\noexpand\noexpand\noexpand\the\toks\the\paramno}% + \advance\paramno by 1\relax + \fi\next} + +% These two commands read recursive and nonrecursive macro bodies. +% (They're different since rec and nonrec macros end differently.) +% + +\catcode `\@\texiatcatcode +\long\def\parsemacbody#1@end macro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% +\long\def\parsermacbody#1@end rmacro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% +\catcode `\@=11\relax + +\let\endargs@\relax +\let\nil@\relax +\def\nilm@{\nil@}% +\long\def\nillm@{\nil@}% + +% This macro is expanded during the Texinfo macro expansion, not during its +% definition. It gets all the arguments values and assigns them to macros +% macarg.ARGNAME +% +% #1 is the macro name +% #2 is the list of argument names +% #3 is the list of argument values +\def\getargvals@#1#2#3{% + \def\macargdeflist@{}% + \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion. + \def\paramlist{#2,\nil@}% + \def\macroname{#1}% + \begingroup + \macroargctxt + \def\argvaluelist{#3,\nil@}% + \def\@tempa{#3}% + \ifx\@tempa\empty + \setemptyargvalues@ + \else + \getargvals@@ + \fi +} + +% +\def\getargvals@@{% + \ifx\paramlist\nilm@ + % Some sanity check needed here that \argvaluelist is also empty. + \ifx\argvaluelist\nillm@ + \else + \errhelp = \EMsimple + \errmessage{Too many arguments in macro `\macroname'!}% + \fi + \let\next\macargexpandinbody@ + \else + \ifx\argvaluelist\nillm@ + % No more arguments values passed to macro. Set remaining named-arg + % macros to empty. + \let\next\setemptyargvalues@ + \else + % pop current arg name into \@tempb + \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}% + \expandafter\@tempa\expandafter{\paramlist}% + % pop current argument value into \@tempc + \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}% + \expandafter\@tempa\expandafter{\argvaluelist}% + % Here \@tempb is the current arg name and \@tempc is the current arg value. + % First place the new argument macro definition into \@tempd + \expandafter\macname\expandafter{\@tempc}% + \expandafter\let\csname macarg.\@tempb\endcsname\relax + \expandafter\def\expandafter\@tempe\expandafter{% + \csname macarg.\@tempb\endcsname}% + \edef\@tempd{\long\def\@tempe{\the\macname}}% + \push@\@tempd\macargdeflist@ + \let\next\getargvals@@ + \fi + \fi + \next +} + +\def\push@#1#2{% + \expandafter\expandafter\expandafter\def + \expandafter\expandafter\expandafter#2% + \expandafter\expandafter\expandafter{% + \expandafter#1#2}% +} + +% Replace arguments by their values in the macro body, and place the result +% in macro \@tempa +\def\macvalstoargs@{% + % To do this we use the property that token registers that are \the'ed + % within an \edef expand only once. So we are going to place all argument + % values into respective token registers. + % + % First we save the token context, and initialize argument numbering. + \begingroup + \paramno0\relax + % Then, for each argument number #N, we place the corresponding argument + % value into a new token list register \toks#N + \expandafter\putargsintokens@\saveparamlist@,;,% + % Then, we expand the body so that argument are replaced by their + % values. The trick for values not to be expanded themselves is that they + % are within tokens and that tokens expand only once in an \edef . + \edef\@tempc{\csname mac.\macroname .body\endcsname}% + % Now we restore the token stack pointer to free the token list registers + % which we have used, but we make sure that expanded body is saved after + % group. + \expandafter + \endgroup + \expandafter\def\expandafter\@tempa\expandafter{\@tempc}% + } + +\def\macargexpandinbody@{% + %% Define the named-macro outside of this group and then close this group. + \expandafter + \endgroup + \macargdeflist@ + % First the replace in body the macro arguments by their values, the result + % is in \@tempa . + \macvalstoargs@ + % Then we point at the \norecurse or \gobble (for recursive) macro value + % with \@tempb . + \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname + % Depending on whether it is recursive or not, we need some tailing + % \egroup . + \ifx\@tempb\gobble + \let\@tempc\relax + \else + \let\@tempc\egroup + \fi + % And now we do the real job: + \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}% + \@tempd +} + +\def\putargsintokens@#1,{% + \if#1;\let\next\relax + \else + \let\next\putargsintokens@ + % First we allocate the new token list register, and give it a temporary + % alias \@tempb . + \toksdef\@tempb\the\paramno + % Then we place the argument value into that token list register. + \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname + \expandafter\@tempb\expandafter{\@tempa}% + \advance\paramno by 1\relax + \fi + \next +} + +% Save the token stack pointer into macro #1 +\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}} +% Restore the token stack pointer from number in macro #1 +\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax} +% newtoks that can be used non \outer . +\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi} + +% Tailing missing arguments are set to empty +\def\setemptyargvalues@{% + \ifx\paramlist\nilm@ + \let\next\macargexpandinbody@ + \else + \expandafter\setemptyargvaluesparser@\paramlist\endargs@ + \let\next\setemptyargvalues@ + \fi + \next +} + +\def\setemptyargvaluesparser@#1,#2\endargs@{% + \expandafter\def\expandafter\@tempa\expandafter{% + \expandafter\def\csname macarg.#1\endcsname{}}% + \push@\@tempa\macargdeflist@ + \def\paramlist{#2}% +} + +% #1 is the element target macro +% #2 is the list macro +% #3,#4\endargs@ is the list value +\def\pop@#1#2#3,#4\endargs@{% + \def#1{#3}% + \def#2{#4}% +} +\long\def\longpop@#1#2#3,#4\endargs@{% + \long\def#1{#3}% + \long\def#2{#4}% +} + +% This defines a Texinfo @macro. There are eight cases: recursive and +% nonrecursive macros of zero, one, up to nine, and many arguments. +% Much magic with \expandafter here. +% \xdef is used so that macro definitions will survive the file +% they're defined in; @include reads the file inside a group. +% +\def\defmacro{% + \let\hash=##% convert placeholders to macro parameter chars + \ifrecursive + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\scanmacro{\temp}}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup\noexpand\scanmacro{\temp}}% + \else + \ifnum\paramno<10\relax % at most 9 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \else % 10 or more + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble + \fi + \fi + \else + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \else % at most 9 + \ifnum\paramno<10\relax + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \expandafter\noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \else % 10 or more: + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse + \fi + \fi + \fi} + +\catcode `\@\texiatcatcode\relax + +\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} + +% \braceorline decides whether the next nonwhitespace character is a +% {. If so it reads up to the closing }, if not, it reads the whole +% line. Whatever was read is then fed to the next control sequence +% as an argument (by \parsebrace or \parsearg). +% +\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} +\def\braceorlinexxx{% + \ifx\nchar\bgroup\else + \expandafter\parsearg + \fi \macnamexxx} + + +% @alias. +% We need some trickery to remove the optional spaces around the equal +% sign. Make them active and then expand them all to nothing. +% +\def\alias{\parseargusing\obeyspaces\aliasxxx} +\def\aliasxxx #1{\aliasyyy#1\relax} +\def\aliasyyy #1=#2\relax{% + {% + \expandafter\let\obeyedspace=\empty + \addtomacrolist{#1}% + \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% + }% + \next +} + + +\message{cross references,} + +\newwrite\auxfile +\newif\ifhavexrefs % True if xref values are known. +\newif\ifwarnedxrefs % True if we warned once that they aren't known. + +% @inforef is relatively simple. +\def\inforef #1{\inforefzzz #1,,,,**} +\def\inforefzzz #1,#2,#3,#4**{% + \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, + node \samp{\ignorespaces#1{}}} + +% @node's only job in TeX is to define \lastnode, which is used in +% cross-references. The @node line might or might not have commas, and +% might or might not have spaces before the first comma, like: +% @node foo , bar , ... +% We don't want such trailing spaces in the node name. +% +\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} +% +% also remove a trailing comma, in case of something like this: +% @node Help-Cross, , , Cross-refs +\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} +\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} + +\let\nwnode=\node +\let\lastnode=\empty + +% Write a cross-reference definition for the current node. #1 is the +% type (Ynumbered, Yappendix, Ynothing). +% +\def\donoderef#1{% + \ifx\lastnode\empty\else + \setref{\lastnode}{#1}% + \global\let\lastnode=\empty + \fi +} + +% @anchor{NAME} -- define xref target at arbitrary point. +% +\newcount\savesfregister +% +\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} + +% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an +% anchor), which consists of three parts: +% 1) NAME-title - the current sectioning name taken from \lastsection, +% or the anchor name. +% 2) NAME-snt - section number and type, passed as the SNT arg, or +% empty for anchors. +% 3) NAME-pg - the page number. +% +% This is called from \donoderef, \anchor, and \dofloat. In the case of +% floats, there is an additional part, which is not written here: +% 4) NAME-lof - the text as it should appear in a @listoffloats. +% +\def\setref#1#2{% + \pdfmkdest{#1}% + \iflinks + {% + \atdummies % preserve commands, but don't expand them + \edef\writexrdef##1##2{% + \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef + ##1}{##2}}% these are parameters of \writexrdef + }% + \toks0 = \expandafter{\lastsection}% + \immediate \writexrdef{title}{\the\toks0 }% + \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout + }% + \fi +} + +% @xrefautosectiontitle on|off says whether @section(ing) names are used +% automatically in xrefs, if the third arg is not explicitly specified. +% This was provided as a "secret" @set xref-automatic-section-title +% variable, now it's official. +% +\parseargdef\xrefautomaticsectiontitle{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @xrefautomaticsectiontitle value `\temp', + must be on|off}% + \fi\fi +} + +% +% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is +% the node name, #2 the name of the Info cross-reference, #3 the printed +% node name, #4 the name of the Info file, #5 the name of the printed +% manual. All but the node name can be omitted. +% +\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} +\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} +\def\ref#1{\xrefX[#1,,,,,,,]} +% +\newbox\toprefbox +\newbox\printedrefnamebox +\newbox\infofilenamebox +\newbox\printedmanualbox +% +\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \unsepspaces + % + % Get args without leading/trailing spaces. + \def\printedrefname{\ignorespaces #3}% + \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}% + % + \def\infofilename{\ignorespaces #4}% + \setbox\infofilenamebox = \hbox{\infofilename\unskip}% + % + \def\printedmanual{\ignorespaces #5}% + \setbox\printedmanualbox = \hbox{\printedmanual\unskip}% + % + % If the printed reference name (arg #3) was not explicitly given in + % the @xref, figure out what we want to use. + \ifdim \wd\printedrefnamebox = 0pt + % No printed node name was explicitly given. + \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax + % Not auto section-title: use node name inside the square brackets. + \def\printedrefname{\ignorespaces #1}% + \else + % Auto section-title: use chapter/section title inside + % the square brackets if we have it. + \ifdim \wd\printedmanualbox > 0pt + % It is in another manual, so we don't have it; use node name. + \def\printedrefname{\ignorespaces #1}% + \else + \ifhavexrefs + % We (should) know the real title if we have the xref values. + \def\printedrefname{\refx{#1-title}{}}% + \else + % Otherwise just copy the Info node name. + \def\printedrefname{\ignorespaces #1}% + \fi% + \fi + \fi + \fi + % + % Make link in pdf output. + \ifpdf + {\indexnofonts + \turnoffactive + \makevalueexpandable + % This expands tokens, so do it after making catcode changes, so _ + % etc. don't get their TeX definitions. This ignores all spaces in + % #4, including (wrongly) those in the middle of the filename. + \getfilename{#4}% + % + % This (wrongly) does not take account of leading or trailing + % spaces in #1, which should be ignored. + \edef\pdfxrefdest{#1}% + \ifx\pdfxrefdest\empty + \def\pdfxrefdest{Top}% no empty targets + \else + \txiescapepdf\pdfxrefdest % escape PDF special chars + \fi + % + \leavevmode + \startlink attr{/Border [0 0 0]}% + \ifnum\filenamelength>0 + goto file{\the\filename.pdf} name{\pdfxrefdest}% + \else + goto name{\pdfmkpgn{\pdfxrefdest}}% + \fi + }% + \setcolor{\linkcolor}% + \fi + % + % Float references are printed completely differently: "Figure 1.2" + % instead of "[somenode], p.3". We distinguish them by the + % LABEL-title being set to a magic string. + {% + % Have to otherify everything special to allow the \csname to + % include an _ in the xref name, etc. + \indexnofonts + \turnoffactive + \expandafter\global\expandafter\let\expandafter\Xthisreftitle + \csname XR#1-title\endcsname + }% + \iffloat\Xthisreftitle + % If the user specified the print name (third arg) to the ref, + % print it instead of our usual "Figure 1.2". + \ifdim\wd\printedrefnamebox = 0pt + \refx{#1-snt}{}% + \else + \printedrefname + \fi + % + % If the user also gave the printed manual name (fifth arg), append + % "in MANUALNAME". + \ifdim \wd\printedmanualbox > 0pt + \space \putwordin{} \cite{\printedmanual}% + \fi + \else + % node/anchor (non-float) references. + % + % If we use \unhbox to print the node names, TeX does not insert + % empty discretionaries after hyphens, which means that it will not + % find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, + % this is a loss. Therefore, we give the text of the node name + % again, so it is as if TeX is seeing it for the first time. + % + \ifdim \wd\printedmanualbox > 0pt + % Cross-manual reference with a printed manual name. + % + \crossmanualxref{\cite{\printedmanual\unskip}}% + % + \else\ifdim \wd\infofilenamebox > 0pt + % Cross-manual reference with only an info filename (arg 4), no + % printed manual name (arg 5). This is essentially the same as + % the case above; we output the filename, since we have nothing else. + % + \crossmanualxref{\code{\infofilename\unskip}}% + % + \else + % Reference within this manual. + % + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % output the `[mynode]' via the macro below so it can be overridden. + \xrefprintnodename\printedrefname + % + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \fi\fi + \fi + \endlink +\endgroup} + +% Output a cross-manual xref to #1. Used just above (twice). +% +% Only include the text "Section ``foo'' in" if the foo is neither +% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply +% "see The Foo Manual", the idea being to refer to the whole manual. +% +% But, this being TeX, we can't easily compare our node name against the +% string "Top" while ignoring the possible spaces before and after in +% the input. By adding the arbitrary 7sp below, we make it much less +% likely that a real node name would have the same width as "Top" (e.g., +% in a monospaced font). Hopefully it will never happen in practice. +% +% For the same basic reason, we retypeset the "Top" at every +% reference, since the current font is indeterminate. +% +\def\crossmanualxref#1{% + \setbox\toprefbox = \hbox{Top\kern7sp}% + \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% + \ifdim \wd2 > 7sp % nonempty? + \ifdim \wd2 = \wd\toprefbox \else % same as Top? + \putwordSection{} ``\printedrefname'' \putwordin{}\space + \fi + \fi + #1% +} + +% This macro is called from \xrefX for the `[nodename]' part of xref +% output. It's a separate macro only so it can be changed more easily, +% since square brackets don't work well in some documents. Particularly +% one that Bob is working on :). +% +\def\xrefprintnodename#1{[#1]} + +% Things referred to by \setref. +% +\def\Ynothing{} +\def\Yomitfromtoc{} +\def\Ynumbered{% + \ifnum\secno=0 + \putwordChapter@tie \the\chapno + \else \ifnum\subsecno=0 + \putwordSection@tie \the\chapno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno + \else + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} +\def\Yappendix{% + \ifnum\secno=0 + \putwordAppendix@tie @char\the\appendixno{}% + \else \ifnum\subsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno + \else + \putwordSection@tie + @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} + +% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. +% If its value is nonempty, SUFFIX is output afterward. +% +\def\refx#1#2{% + {% + \indexnofonts + \otherbackslash + \expandafter\global\expandafter\let\expandafter\thisrefX + \csname XR#1\endcsname + }% + \ifx\thisrefX\relax + % If not defined, say something at least. + \angleleft un\-de\-fined\angleright + \iflinks + \ifhavexrefs + {\toks0 = {#1}% avoid expansion of possibly-complex value + \message{\linenumber Undefined cross reference `\the\toks0'.}}% + \else + \ifwarnedxrefs\else + \global\warnedxrefstrue + \message{Cross reference values unknown; you must run TeX again.}% + \fi + \fi + \fi + \else + % It's defined, so just use it. + \thisrefX + \fi + #2% Output the suffix in any case. +} + +% This is the macro invoked by entries in the aux file. Usually it's +% just a \def (we prepend XR to the control sequence name to avoid +% collisions). But if this is a float type, we have more work to do. +% +\def\xrdef#1#2{% + {% The node name might contain 8-bit characters, which in our current + % implementation are changed to commands like @'e. Don't let these + % mess up the control sequence name. + \indexnofonts + \turnoffactive + \xdef\safexrefname{#1}% + }% + % + \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref + % + % Was that xref control sequence that we just defined for a float? + \expandafter\iffloat\csname XR\safexrefname\endcsname + % it was a float, and we have the (safe) float type in \iffloattype. + \expandafter\let\expandafter\floatlist + \csname floatlist\iffloattype\endcsname + % + % Is this the first time we've seen this float type? + \expandafter\ifx\floatlist\relax + \toks0 = {\do}% yes, so just \do + \else + % had it before, so preserve previous elements in list. + \toks0 = \expandafter{\floatlist\do}% + \fi + % + % Remember this xref in the control sequence \floatlistFLOATTYPE, + % for later use in \listoffloats. + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0 + {\safexrefname}}% + \fi +} + +% Read the last existing aux file, if any. No error if none exists. +% +\def\tryauxfile{% + \openin 1 \jobname.aux + \ifeof 1 \else + \readdatafile{aux}% + \global\havexrefstrue + \fi + \closein 1 +} + +\def\setupdatafile{% + \catcode`\^^@=\other + \catcode`\^^A=\other + \catcode`\^^B=\other + \catcode`\^^C=\other + \catcode`\^^D=\other + \catcode`\^^E=\other + \catcode`\^^F=\other + \catcode`\^^G=\other + \catcode`\^^H=\other + \catcode`\^^K=\other + \catcode`\^^L=\other + \catcode`\^^N=\other + \catcode`\^^P=\other + \catcode`\^^Q=\other + \catcode`\^^R=\other + \catcode`\^^S=\other + \catcode`\^^T=\other + \catcode`\^^U=\other + \catcode`\^^V=\other + \catcode`\^^W=\other + \catcode`\^^X=\other + \catcode`\^^Z=\other + \catcode`\^^[=\other + \catcode`\^^\=\other + \catcode`\^^]=\other + \catcode`\^^^=\other + \catcode`\^^_=\other + % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. + % in xref tags, i.e., node names. But since ^^e4 notation isn't + % supported in the main text, it doesn't seem desirable. Furthermore, + % that is not enough: for node names that actually contain a ^ + % character, we would end up writing a line like this: 'xrdef {'hat + % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first + % argument, and \hat is not an expandable control sequence. It could + % all be worked out, but why? Either we support ^^ or we don't. + % + % The other change necessary for this was to define \auxhat: + % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter + % and then to call \auxhat in \setq. + % + \catcode`\^=\other + % + % Special characters. Should be turned off anyway, but... + \catcode`\~=\other + \catcode`\[=\other + \catcode`\]=\other + \catcode`\"=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\$=\other + \catcode`\#=\other + \catcode`\&=\other + \catcode`\%=\other + \catcode`+=\other % avoid \+ for paranoia even though we've turned it off + % + % This is to support \ in node names and titles, since the \ + % characters end up in a \csname. It's easier than + % leaving it active and making its active definition an actual \ + % character. What I don't understand is why it works in the *value* + % of the xrdef. Seems like it should be a catcode12 \, and that + % should not typeset properly. But it works, so I'm moving on for + % now. --karl, 15jan04. + \catcode`\\=\other + % + % Make the characters 128-255 be printing characters. + {% + \count1=128 + \def\loop{% + \catcode\count1=\other + \advance\count1 by 1 + \ifnum \count1<256 \loop \fi + }% + }% + % + % @ is our escape character in .aux files, and we need braces. + \catcode`\{=1 + \catcode`\}=2 + \catcode`\@=0 +} + +\def\readdatafile#1{% +\begingroup + \setupdatafile + \input\jobname.#1 +\endgroup} + + +\message{insertions,} +% including footnotes. + +\newcount \footnoteno + +% The trailing space in the following definition for supereject is +% vital for proper filling; pages come out unaligned when you do a +% pagealignmacro call if that space before the closing brace is +% removed. (Generally, numeric constants should always be followed by a +% space to prevent strange expansion errors.) +\def\supereject{\par\penalty -20000\footnoteno =0 } + +% @footnotestyle is meaningful for Info output only. +\let\footnotestyle=\comment + +{\catcode `\@=11 +% +% Auto-number footnotes. Otherwise like plain. +\gdef\footnote{% + \let\indent=\ptexindent + \let\noindent=\ptexnoindent + \global\advance\footnoteno by \@ne + \edef\thisfootno{$^{\the\footnoteno}$}% + % + % In case the footnote comes at the end of a sentence, preserve the + % extra spacing after we do the footnote number. + \let\@sf\empty + \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi + % + % Remove inadvertent blank space before typesetting the footnote number. + \unskip + \thisfootno\@sf + \dofootnote +}% + +% Don't bother with the trickery in plain.tex to not require the +% footnote text as a parameter. Our footnotes don't need to be so general. +% +% Oh yes, they do; otherwise, @ifset (and anything else that uses +% \parseargline) fails inside footnotes because the tokens are fixed when +% the footnote is read. --karl, 16nov96. +% +\gdef\dofootnote{% + \insert\footins\bgroup + % We want to typeset this text as a normal paragraph, even if the + % footnote reference occurs in (for example) a display environment. + % So reset some parameters. + \hsize=\pagewidth + \interlinepenalty\interfootnotelinepenalty + \splittopskip\ht\strutbox % top baseline for broken footnotes + \splitmaxdepth\dp\strutbox + \floatingpenalty\@MM + \leftskip\z@skip + \rightskip\z@skip + \spaceskip\z@skip + \xspaceskip\z@skip + \parindent\defaultparindent + % + \smallfonts \rm + % + % Because we use hanging indentation in footnotes, a @noindent appears + % to exdent this text, so make it be a no-op. makeinfo does not use + % hanging indentation so @noindent can still be needed within footnote + % text after an @example or the like (not that this is good style). + \let\noindent = \relax + % + % Hang the footnote text off the number. Use \everypar in case the + % footnote extends for more than one paragraph. + \everypar = {\hang}% + \textindent{\thisfootno}% + % + % Don't crash into the line above the footnote text. Since this + % expands into a box, it must come within the paragraph, lest it + % provide a place where TeX can split the footnote. + \footstrut + % + % Invoke rest of plain TeX footnote routine. + \futurelet\next\fo@t +} +}%end \catcode `\@=11 + +% In case a @footnote appears in a vbox, save the footnote text and create +% the real \insert just after the vbox finished. Otherwise, the insertion +% would be lost. +% Similarly, if a @footnote appears inside an alignment, save the footnote +% text to a box and make the \insert when a row of the table is finished. +% And the same can be done for other insert classes. --kasal, 16nov03. + +% Replace the \insert primitive by a cheating macro. +% Deeper inside, just make sure that the saved insertions are not spilled +% out prematurely. +% +\def\startsavinginserts{% + \ifx \insert\ptexinsert + \let\insert\saveinsert + \else + \let\checkinserts\relax + \fi +} + +% This \insert replacement works for both \insert\footins{foo} and +% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. +% +\def\saveinsert#1{% + \edef\next{\noexpand\savetobox \makeSAVEname#1}% + \afterassignment\next + % swallow the left brace + \let\temp = +} +\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} +\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} + +\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} + +\def\placesaveins#1{% + \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname + {\box#1}% +} + +% eat @SAVE -- beware, all of them have catcode \other: +{ + \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) + \gdef\gobblesave @SAVE{} +} + +% initialization: +\def\newsaveins #1{% + \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% + \next +} +\def\newsaveinsX #1{% + \csname newbox\endcsname #1% + \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts + \checksaveins #1}% +} + +% initialize: +\let\checkinserts\empty +\newsaveins\footins +\newsaveins\margin + + +% @image. We use the macros from epsf.tex to support this. +% If epsf.tex is not installed and @image is used, we complain. +% +% Check for and read epsf.tex up front. If we read it only at @image +% time, we might be inside a group, and then its definitions would get +% undone and the next image would fail. +\openin 1 = epsf.tex +\ifeof 1 \else + % Do not bother showing banner with epsf.tex v2.7k (available in + % doc/epsf.tex and on ctan). + \def\epsfannounce{\toks0 = }% + \input epsf.tex +\fi +\closein 1 +% +% We will only complain once about lack of epsf.tex. +\newif\ifwarnednoepsf +\newhelp\noepsfhelp{epsf.tex must be installed for images to + work. It is also included in the Texinfo distribution, or you can get + it from ftp://tug.org/tex/epsf.tex.} +% +\def\image#1{% + \ifx\epsfbox\thisisundefined + \ifwarnednoepsf \else + \errhelp = \noepsfhelp + \errmessage{epsf.tex not found, images will be ignored}% + \global\warnednoepsftrue + \fi + \else + \imagexxx #1,,,,,\finish + \fi +} +% +% Arguments to @image: +% #1 is (mandatory) image filename; we tack on .eps extension. +% #2 is (optional) width, #3 is (optional) height. +% #4 is (ignored optional) html alt text. +% #5 is (ignored optional) extension. +% #6 is just the usual extra ignored arg for parsing stuff. +\newif\ifimagevmode +\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup + \catcode`\^^M = 5 % in case we're inside an example + \normalturnoffactive % allow _ et al. in names + % If the image is by itself, center it. + \ifvmode + \imagevmodetrue + \else \ifx\centersub\centerV + % for @center @image, we need a vbox so we can have our vertical space + \imagevmodetrue + \vbox\bgroup % vbox has better behavior than vtop herev + \fi\fi + % + \ifimagevmode + \nobreak\medskip + % Usually we'll have text after the image which will insert + % \parskip glue, so insert it here too to equalize the space + % above and below. + \nobreak\vskip\parskip + \nobreak + \fi + % + % Leave vertical mode so that indentation from an enclosing + % environment such as @quotation is respected. + % However, if we're at the top level, we don't want the + % normal paragraph indentation. + % On the other hand, if we are in the case of @center @image, we don't + % want to start a paragraph, which will create a hsize-width box and + % eradicate the centering. + \ifx\centersub\centerV\else \noindent \fi + % + % Output the image. + \ifpdf + \dopdfimage{#1}{#2}{#3}% + \else + % \epsfbox itself resets \epsf?size at each figure. + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi + \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi + \epsfbox{#1.eps}% + \fi + % + \ifimagevmode + \medskip % space after a standalone image + \fi + \ifx\centersub\centerV \egroup \fi +\endgroup} + + +% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, +% etc. We don't actually implement floating yet, we always include the +% float "here". But it seemed the best name for the future. +% +\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} + +% There may be a space before second and/or third parameter; delete it. +\def\eatcommaspace#1, {#1,} + +% #1 is the optional FLOATTYPE, the text label for this float, typically +% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, +% this float will not be numbered and cannot be referred to. +% +% #2 is the optional xref label. Also must be present for the float to +% be referable. +% +% #3 is the optional positioning argument; for now, it is ignored. It +% will somehow specify the positions allowed to float to (here, top, bottom). +% +% We keep a separate counter for each FLOATTYPE, which we reset at each +% chapter-level command. +\let\resetallfloatnos=\empty +% +\def\dofloat#1,#2,#3,#4\finish{% + \let\thiscaption=\empty + \let\thisshortcaption=\empty + % + % don't lose footnotes inside @float. + % + % BEWARE: when the floats start float, we have to issue warning whenever an + % insert appears inside a float which could possibly float. --kasal, 26may04 + % + \startsavinginserts + % + % We can't be used inside a paragraph. + \par + % + \vtop\bgroup + \def\floattype{#1}% + \def\floatlabel{#2}% + \def\floatloc{#3}% we do nothing with this yet. + % + \ifx\floattype\empty + \let\safefloattype=\empty + \else + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + \fi + % + % If label is given but no type, we handle that as the empty type. + \ifx\floatlabel\empty \else + % We want each FLOATTYPE to be numbered separately (Figure 1, + % Table 1, Figure 2, ...). (And if no label, no number.) + % + \expandafter\getfloatno\csname\safefloattype floatno\endcsname + \global\advance\floatno by 1 + % + {% + % This magic value for \lastsection is output by \setref as the + % XREFLABEL-title value. \xrefX uses it to distinguish float + % labels (which have a completely different output format) from + % node and anchor labels. And \xrdef uses it to construct the + % lists of floats. + % + \edef\lastsection{\floatmagic=\safefloattype}% + \setref{\floatlabel}{Yfloat}% + }% + \fi + % + % start with \parskip glue, I guess. + \vskip\parskip + % + % Don't suppress indentation if a float happens to start a section. + \restorefirstparagraphindent +} + +% we have these possibilities: +% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap +% @float Foo,lbl & no caption: Foo 1.1 +% @float Foo & @caption{Cap}: Foo: Cap +% @float Foo & no caption: Foo +% @float ,lbl & Caption{Cap}: 1.1: Cap +% @float ,lbl & no caption: 1.1 +% @float & @caption{Cap}: Cap +% @float & no caption: +% +\def\Efloat{% + \let\floatident = \empty + % + % In all cases, if we have a float type, it comes first. + \ifx\floattype\empty \else \def\floatident{\floattype}\fi + % + % If we have an xref label, the number comes next. + \ifx\floatlabel\empty \else + \ifx\floattype\empty \else % if also had float type, need tie first. + \appendtomacro\floatident{\tie}% + \fi + % the number. + \appendtomacro\floatident{\chaplevelprefix\the\floatno}% + \fi + % + % Start the printed caption with what we've constructed in + % \floatident, but keep it separate; we need \floatident again. + \let\captionline = \floatident + % + \ifx\thiscaption\empty \else + \ifx\floatident\empty \else + \appendtomacro\captionline{: }% had ident, so need a colon between + \fi + % + % caption text. + \appendtomacro\captionline{\scanexp\thiscaption}% + \fi + % + % If we have anything to print, print it, with space before. + % Eventually this needs to become an \insert. + \ifx\captionline\empty \else + \vskip.5\parskip + \captionline + % + % Space below caption. + \vskip\parskip + \fi + % + % If have an xref label, write the list of floats info. Do this + % after the caption, to avoid chance of it being a breakpoint. + \ifx\floatlabel\empty \else + % Write the text that goes in the lof to the aux file as + % \floatlabel-lof. Besides \floatident, we include the short + % caption if specified, else the full caption if specified, else nothing. + {% + \atdummies + % + % since we read the caption text in the macro world, where ^^M + % is turned into a normal character, we have to scan it back, so + % we don't write the literal three characters "^^M" into the aux file. + \scanexp{% + \xdef\noexpand\gtemp{% + \ifx\thisshortcaption\empty + \thiscaption + \else + \thisshortcaption + \fi + }% + }% + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident + \ifx\gtemp\empty \else : \gtemp \fi}}% + }% + \fi + \egroup % end of \vtop + % + % place the captured inserts + % + % BEWARE: when the floats start floating, we have to issue warning + % whenever an insert appears inside a float which could possibly + % float. --kasal, 26may04 + % + \checkinserts +} + +% Append the tokens #2 to the definition of macro #1, not expanding either. +% +\def\appendtomacro#1#2{% + \expandafter\def\expandafter#1\expandafter{#1#2}% +} + +% @caption, @shortcaption +% +\def\caption{\docaption\thiscaption} +\def\shortcaption{\docaption\thisshortcaption} +\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} +\def\defcaption#1#2{\egroup \def#1{#2}} + +% The parameter is the control sequence identifying the counter we are +% going to use. Create it if it doesn't exist and assign it to \floatno. +\def\getfloatno#1{% + \ifx#1\relax + % Haven't seen this figure type before. + \csname newcount\endcsname #1% + % + % Remember to reset this floatno at the next chap. + \expandafter\gdef\expandafter\resetallfloatnos + \expandafter{\resetallfloatnos #1=0 }% + \fi + \let\floatno#1% +} + +% \setref calls this to get the XREFLABEL-snt value. We want an @xref +% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we +% first read the @float command. +% +\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% + +% Magic string used for the XREFLABEL-title value, so \xrefX can +% distinguish floats from other xref types. +\def\floatmagic{!!float!!} + +% #1 is the control sequence we are passed; we expand into a conditional +% which is true if #1 represents a float ref. That is, the magic +% \lastsection value which we \setref above. +% +\def\iffloat#1{\expandafter\doiffloat#1==\finish} +% +% #1 is (maybe) the \floatmagic string. If so, #2 will be the +% (safe) float type for this float. We set \iffloattype to #2. +% +\def\doiffloat#1=#2=#3\finish{% + \def\temp{#1}% + \def\iffloattype{#2}% + \ifx\temp\floatmagic +} + +% @listoffloats FLOATTYPE - print a list of floats like a table of contents. +% +\parseargdef\listoffloats{% + \def\floattype{#1}% floattype + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + % + % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. + \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax + \ifhavexrefs + % if the user said @listoffloats foo but never @float foo. + \message{\linenumber No `\safefloattype' floats to list.}% + \fi + \else + \begingroup + \leftskip=\tocindent % indent these entries like a toc + \let\do=\listoffloatsdo + \csname floatlist\safefloattype\endcsname + \endgroup + \fi +} + +% This is called on each entry in a list of floats. We're passed the +% xref label, in the form LABEL-title, which is how we save it in the +% aux file. We strip off the -title and look up \XRLABEL-lof, which +% has the text we're supposed to typeset here. +% +% Figures without xref labels will not be included in the list (since +% they won't appear in the aux file). +% +\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} +\def\listoffloatsdoentry#1-title\finish{{% + % Can't fully expand XR#1-lof because it can contain anything. Just + % pass the control sequence. On the other hand, XR#1-pg is just the + % page number, and we want to fully expand that so we can get a link + % in pdf output. + \toksA = \expandafter{\csname XR#1-lof\endcsname}% + % + % use the same \entry macro we use to generate the TOC and index. + \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% + \writeentry +}} + + +\message{localization,} + +% For single-language documents, @documentlanguage is usually given very +% early, just after @documentencoding. Single argument is the language +% (de) or locale (de_DE) abbreviation. +% +{ + \catcode`\_ = \active + \globaldefs=1 +\parseargdef\documentlanguage{\begingroup + \let_=\normalunderscore % normal _ character for filenames + \tex % read txi-??.tex file in plain TeX. + % Read the file by the name they passed if it exists. + \openin 1 txi-#1.tex + \ifeof 1 + \documentlanguagetrywithoutunderscore{#1_\finish}% + \else + \globaldefs = 1 % everything in the txi-LL files needs to persist + \input txi-#1.tex + \fi + \closein 1 + \endgroup % end raw TeX +\endgroup} +% +% If they passed de_DE, and txi-de_DE.tex doesn't exist, +% try txi-de.tex. +% +\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{% + \openin 1 txi-#1.tex + \ifeof 1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \else + \globaldefs = 1 % everything in the txi-LL files needs to persist + \input txi-#1.tex + \fi + \closein 1 +} +}% end of special _ catcode +% +\newhelp\nolanghelp{The given language definition file cannot be found or +is empty. Maybe you need to install it? Putting it in the current +directory should work if nowhere else does.} + +% This macro is called from txi-??.tex files; the first argument is the +% \language name to set (without the "\lang@" prefix), the second and +% third args are \{left,right}hyphenmin. +% +% The language names to pass are determined when the format is built. +% See the etex.log file created at that time, e.g., +% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log. +% +% With TeX Live 2008, etex now includes hyphenation patterns for all +% available languages. This means we can support hyphenation in +% Texinfo, at least to some extent. (This still doesn't solve the +% accented characters problem.) +% +\catcode`@=11 +\def\txisetlanguage#1#2#3{% + % do not set the language if the name is undefined in the current TeX. + \expandafter\ifx\csname lang@#1\endcsname \relax + \message{no patterns for #1}% + \else + \global\language = \csname lang@#1\endcsname + \fi + % but there is no harm in adjusting the hyphenmin values regardless. + \global\lefthyphenmin = #2\relax + \global\righthyphenmin = #3\relax +} + +% Helpers for encodings. +% Set the catcode of characters 128 through 255 to the specified number. +% +\def\setnonasciicharscatcode#1{% + \count255=128 + \loop\ifnum\count255<256 + \global\catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} + +\def\setnonasciicharscatcodenonglobal#1{% + \count255=128 + \loop\ifnum\count255<256 + \catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} + +% @documentencoding sets the definition of non-ASCII characters +% according to the specified encoding. +% +\parseargdef\documentencoding{% + % Encoding being declared for the document. + \def\declaredencoding{\csname #1.enc\endcsname}% + % + % Supported encodings: names converted to tokens in order to be able + % to compare them with \ifx. + \def\ascii{\csname US-ASCII.enc\endcsname}% + \def\latnine{\csname ISO-8859-15.enc\endcsname}% + \def\latone{\csname ISO-8859-1.enc\endcsname}% + \def\lattwo{\csname ISO-8859-2.enc\endcsname}% + \def\utfeight{\csname UTF-8.enc\endcsname}% + % + \ifx \declaredencoding \ascii + \asciichardefs + % + \else \ifx \declaredencoding \lattwo + \setnonasciicharscatcode\active + \lattwochardefs + % + \else \ifx \declaredencoding \latone + \setnonasciicharscatcode\active + \latonechardefs + % + \else \ifx \declaredencoding \latnine + \setnonasciicharscatcode\active + \latninechardefs + % + \else \ifx \declaredencoding \utfeight + \setnonasciicharscatcode\active + \utfeightchardefs + % + \else + \message{Unknown document encoding #1, ignoring.}% + % + \fi % utfeight + \fi % latnine + \fi % latone + \fi % lattwo + \fi % ascii +} + +% A message to be logged when using a character that isn't available +% the default font encoding (OT1). +% +\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}} + +% Take account of \c (plain) vs. \, (Texinfo) difference. +\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi} + +% First, make active non-ASCII characters in order for them to be +% correctly categorized when TeX reads the replacement text of +% macros containing the character definitions. +\setnonasciicharscatcode\active +% +% Latin1 (ISO-8859-1) character definitions. +\def\latonechardefs{% + \gdef^^a0{\tie} + \gdef^^a1{\exclamdown} + \gdef^^a2{\missingcharmsg{CENT SIGN}} + \gdef^^a3{{\pounds}} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\missingcharmsg{YEN SIGN}} + \gdef^^a6{\missingcharmsg{BROKEN BAR}} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\copyright} + \gdef^^aa{\ordf} + \gdef^^ab{\guillemetleft} + \gdef^^ac{$\lnot$} + \gdef^^ad{\-} + \gdef^^ae{\registeredsymbol} + \gdef^^af{\={}} + % + \gdef^^b0{\textdegree} + \gdef^^b1{$\pm$} + \gdef^^b2{$^2$} + \gdef^^b3{$^3$} + \gdef^^b4{\'{}} + \gdef^^b5{$\mu$} + \gdef^^b6{\P} + % + \gdef^^b7{$^.$} + \gdef^^b8{\cedilla\ } + \gdef^^b9{$^1$} + \gdef^^ba{\ordm} + % + \gdef^^bb{\guillemetright} + \gdef^^bc{$1\over4$} + \gdef^^bd{$1\over2$} + \gdef^^be{$3\over4$} + \gdef^^bf{\questiondown} + % + \gdef^^c0{\`A} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\~A} + \gdef^^c4{\"A} + \gdef^^c5{\ringaccent A} + \gdef^^c6{\AE} + \gdef^^c7{\cedilla C} + \gdef^^c8{\`E} + \gdef^^c9{\'E} + \gdef^^ca{\^E} + \gdef^^cb{\"E} + \gdef^^cc{\`I} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\"I} + % + \gdef^^d0{\DH} + \gdef^^d1{\~N} + \gdef^^d2{\`O} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\~O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\O} + \gdef^^d9{\`U} + \gdef^^da{\'U} + \gdef^^db{\^U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\TH} + \gdef^^df{\ss} + % + \gdef^^e0{\`a} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\~a} + \gdef^^e4{\"a} + \gdef^^e5{\ringaccent a} + \gdef^^e6{\ae} + \gdef^^e7{\cedilla c} + \gdef^^e8{\`e} + \gdef^^e9{\'e} + \gdef^^ea{\^e} + \gdef^^eb{\"e} + \gdef^^ec{\`{\dotless i}} + \gdef^^ed{\'{\dotless i}} + \gdef^^ee{\^{\dotless i}} + \gdef^^ef{\"{\dotless i}} + % + \gdef^^f0{\dh} + \gdef^^f1{\~n} + \gdef^^f2{\`o} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\~o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\o} + \gdef^^f9{\`u} + \gdef^^fa{\'u} + \gdef^^fb{\^u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\th} + \gdef^^ff{\"y} +} + +% Latin9 (ISO-8859-15) encoding character definitions. +\def\latninechardefs{% + % Encoding is almost identical to Latin1. + \latonechardefs + % + \gdef^^a4{\euro} + \gdef^^a6{\v S} + \gdef^^a8{\v s} + \gdef^^b4{\v Z} + \gdef^^b8{\v z} + \gdef^^bc{\OE} + \gdef^^bd{\oe} + \gdef^^be{\"Y} +} + +% Latin2 (ISO-8859-2) character definitions. +\def\lattwochardefs{% + \gdef^^a0{\tie} + \gdef^^a1{\ogonek{A}} + \gdef^^a2{\u{}} + \gdef^^a3{\L} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\v L} + \gdef^^a6{\'S} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\v S} + \gdef^^aa{\cedilla S} + \gdef^^ab{\v T} + \gdef^^ac{\'Z} + \gdef^^ad{\-} + \gdef^^ae{\v Z} + \gdef^^af{\dotaccent Z} + % + \gdef^^b0{\textdegree} + \gdef^^b1{\ogonek{a}} + \gdef^^b2{\ogonek{ }} + \gdef^^b3{\l} + \gdef^^b4{\'{}} + \gdef^^b5{\v l} + \gdef^^b6{\'s} + \gdef^^b7{\v{}} + \gdef^^b8{\cedilla\ } + \gdef^^b9{\v s} + \gdef^^ba{\cedilla s} + \gdef^^bb{\v t} + \gdef^^bc{\'z} + \gdef^^bd{\H{}} + \gdef^^be{\v z} + \gdef^^bf{\dotaccent z} + % + \gdef^^c0{\'R} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\u A} + \gdef^^c4{\"A} + \gdef^^c5{\'L} + \gdef^^c6{\'C} + \gdef^^c7{\cedilla C} + \gdef^^c8{\v C} + \gdef^^c9{\'E} + \gdef^^ca{\ogonek{E}} + \gdef^^cb{\"E} + \gdef^^cc{\v E} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\v D} + % + \gdef^^d0{\DH} + \gdef^^d1{\'N} + \gdef^^d2{\v N} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\H O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\v R} + \gdef^^d9{\ringaccent U} + \gdef^^da{\'U} + \gdef^^db{\H U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\cedilla T} + \gdef^^df{\ss} + % + \gdef^^e0{\'r} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\u a} + \gdef^^e4{\"a} + \gdef^^e5{\'l} + \gdef^^e6{\'c} + \gdef^^e7{\cedilla c} + \gdef^^e8{\v c} + \gdef^^e9{\'e} + \gdef^^ea{\ogonek{e}} + \gdef^^eb{\"e} + \gdef^^ec{\v e} + \gdef^^ed{\'{\dotless{i}}} + \gdef^^ee{\^{\dotless{i}}} + \gdef^^ef{\v d} + % + \gdef^^f0{\dh} + \gdef^^f1{\'n} + \gdef^^f2{\v n} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\H o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\v r} + \gdef^^f9{\ringaccent u} + \gdef^^fa{\'u} + \gdef^^fb{\H u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\cedilla t} + \gdef^^ff{\dotaccent{}} +} + +% UTF-8 character definitions. +% +% This code to support UTF-8 is based on LaTeX's utf8.def, with some +% changes for Texinfo conventions. It is included here under the GPL by +% permission from Frank Mittelbach and the LaTeX team. +% +\newcount\countUTFx +\newcount\countUTFy +\newcount\countUTFz + +\gdef\UTFviiiTwoOctets#1#2{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\endcsname} +% +\gdef\UTFviiiThreeOctets#1#2#3{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname} +% +\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname} + +\gdef\UTFviiiDefined#1{% + \ifx #1\relax + \message{\linenumber Unicode char \string #1 not defined for Texinfo}% + \else + \expandafter #1% + \fi +} + +\begingroup + \catcode`\~13 + \catcode`\"12 + + \def\UTFviiiLoop{% + \global\catcode\countUTFx\active + \uccode`\~\countUTFx + \uppercase\expandafter{\UTFviiiTmp}% + \advance\countUTFx by 1 + \ifnum\countUTFx < \countUTFy + \expandafter\UTFviiiLoop + \fi} + + \countUTFx = "C2 + \countUTFy = "E0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiTwoOctets\string~}} + \UTFviiiLoop + + \countUTFx = "E0 + \countUTFy = "F0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiThreeOctets\string~}} + \UTFviiiLoop + + \countUTFx = "F0 + \countUTFy = "F4 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiFourOctets\string~}} + \UTFviiiLoop +\endgroup + +\begingroup + \catcode`\"=12 + \catcode`\<=12 + \catcode`\.=12 + \catcode`\,=12 + \catcode`\;=12 + \catcode`\!=12 + \catcode`\~=13 + + \gdef\DeclareUnicodeCharacter#1#2{% + \countUTFz = "#1\relax + %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + \begingroup + \parseXMLCharref + \def\UTFviiiTwoOctets##1##2{% + \csname u8:##1\string ##2\endcsname}% + \def\UTFviiiThreeOctets##1##2##3{% + \csname u8:##1\string ##2\string ##3\endcsname}% + \def\UTFviiiFourOctets##1##2##3##4{% + \csname u8:##1\string ##2\string ##3\string ##4\endcsname}% + \expandafter\expandafter\expandafter\expandafter + \expandafter\expandafter\expandafter + \gdef\UTFviiiTmp{#2}% + \endgroup} + + \gdef\parseXMLCharref{% + \ifnum\countUTFz < "A0\relax + \errhelp = \EMsimple + \errmessage{Cannot define Unicode char value < 00A0}% + \else\ifnum\countUTFz < "800\relax + \parseUTFviiiA,% + \parseUTFviiiB C\UTFviiiTwoOctets.,% + \else\ifnum\countUTFz < "10000\relax + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiB E\UTFviiiThreeOctets.{,;}% + \else + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiA!% + \parseUTFviiiB F\UTFviiiFourOctets.{!,;}% + \fi\fi\fi + } + + \gdef\parseUTFviiiA#1{% + \countUTFx = \countUTFz + \divide\countUTFz by 64 + \countUTFy = \countUTFz + \multiply\countUTFz by 64 + \advance\countUTFx by -\countUTFz + \advance\countUTFx by 128 + \uccode `#1\countUTFx + \countUTFz = \countUTFy} + + \gdef\parseUTFviiiB#1#2#3#4{% + \advance\countUTFz by "#10\relax + \uccode `#3\countUTFz + \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} +\endgroup + +\def\utfeightchardefs{% + \DeclareUnicodeCharacter{00A0}{\tie} + \DeclareUnicodeCharacter{00A1}{\exclamdown} + \DeclareUnicodeCharacter{00A3}{\pounds} + \DeclareUnicodeCharacter{00A8}{\"{ }} + \DeclareUnicodeCharacter{00A9}{\copyright} + \DeclareUnicodeCharacter{00AA}{\ordf} + \DeclareUnicodeCharacter{00AB}{\guillemetleft} + \DeclareUnicodeCharacter{00AD}{\-} + \DeclareUnicodeCharacter{00AE}{\registeredsymbol} + \DeclareUnicodeCharacter{00AF}{\={ }} + + \DeclareUnicodeCharacter{00B0}{\ringaccent{ }} + \DeclareUnicodeCharacter{00B4}{\'{ }} + \DeclareUnicodeCharacter{00B8}{\cedilla{ }} + \DeclareUnicodeCharacter{00BA}{\ordm} + \DeclareUnicodeCharacter{00BB}{\guillemetright} + \DeclareUnicodeCharacter{00BF}{\questiondown} + + \DeclareUnicodeCharacter{00C0}{\`A} + \DeclareUnicodeCharacter{00C1}{\'A} + \DeclareUnicodeCharacter{00C2}{\^A} + \DeclareUnicodeCharacter{00C3}{\~A} + \DeclareUnicodeCharacter{00C4}{\"A} + \DeclareUnicodeCharacter{00C5}{\AA} + \DeclareUnicodeCharacter{00C6}{\AE} + \DeclareUnicodeCharacter{00C7}{\cedilla{C}} + \DeclareUnicodeCharacter{00C8}{\`E} + \DeclareUnicodeCharacter{00C9}{\'E} + \DeclareUnicodeCharacter{00CA}{\^E} + \DeclareUnicodeCharacter{00CB}{\"E} + \DeclareUnicodeCharacter{00CC}{\`I} + \DeclareUnicodeCharacter{00CD}{\'I} + \DeclareUnicodeCharacter{00CE}{\^I} + \DeclareUnicodeCharacter{00CF}{\"I} + + \DeclareUnicodeCharacter{00D0}{\DH} + \DeclareUnicodeCharacter{00D1}{\~N} + \DeclareUnicodeCharacter{00D2}{\`O} + \DeclareUnicodeCharacter{00D3}{\'O} + \DeclareUnicodeCharacter{00D4}{\^O} + \DeclareUnicodeCharacter{00D5}{\~O} + \DeclareUnicodeCharacter{00D6}{\"O} + \DeclareUnicodeCharacter{00D8}{\O} + \DeclareUnicodeCharacter{00D9}{\`U} + \DeclareUnicodeCharacter{00DA}{\'U} + \DeclareUnicodeCharacter{00DB}{\^U} + \DeclareUnicodeCharacter{00DC}{\"U} + \DeclareUnicodeCharacter{00DD}{\'Y} + \DeclareUnicodeCharacter{00DE}{\TH} + \DeclareUnicodeCharacter{00DF}{\ss} + + \DeclareUnicodeCharacter{00E0}{\`a} + \DeclareUnicodeCharacter{00E1}{\'a} + \DeclareUnicodeCharacter{00E2}{\^a} + \DeclareUnicodeCharacter{00E3}{\~a} + \DeclareUnicodeCharacter{00E4}{\"a} + \DeclareUnicodeCharacter{00E5}{\aa} + \DeclareUnicodeCharacter{00E6}{\ae} + \DeclareUnicodeCharacter{00E7}{\cedilla{c}} + \DeclareUnicodeCharacter{00E8}{\`e} + \DeclareUnicodeCharacter{00E9}{\'e} + \DeclareUnicodeCharacter{00EA}{\^e} + \DeclareUnicodeCharacter{00EB}{\"e} + \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}} + \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}} + \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}} + \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}} + + \DeclareUnicodeCharacter{00F0}{\dh} + \DeclareUnicodeCharacter{00F1}{\~n} + \DeclareUnicodeCharacter{00F2}{\`o} + \DeclareUnicodeCharacter{00F3}{\'o} + \DeclareUnicodeCharacter{00F4}{\^o} + \DeclareUnicodeCharacter{00F5}{\~o} + \DeclareUnicodeCharacter{00F6}{\"o} + \DeclareUnicodeCharacter{00F8}{\o} + \DeclareUnicodeCharacter{00F9}{\`u} + \DeclareUnicodeCharacter{00FA}{\'u} + \DeclareUnicodeCharacter{00FB}{\^u} + \DeclareUnicodeCharacter{00FC}{\"u} + \DeclareUnicodeCharacter{00FD}{\'y} + \DeclareUnicodeCharacter{00FE}{\th} + \DeclareUnicodeCharacter{00FF}{\"y} + + \DeclareUnicodeCharacter{0100}{\=A} + \DeclareUnicodeCharacter{0101}{\=a} + \DeclareUnicodeCharacter{0102}{\u{A}} + \DeclareUnicodeCharacter{0103}{\u{a}} + \DeclareUnicodeCharacter{0104}{\ogonek{A}} + \DeclareUnicodeCharacter{0105}{\ogonek{a}} + \DeclareUnicodeCharacter{0106}{\'C} + \DeclareUnicodeCharacter{0107}{\'c} + \DeclareUnicodeCharacter{0108}{\^C} + \DeclareUnicodeCharacter{0109}{\^c} + \DeclareUnicodeCharacter{0118}{\ogonek{E}} + \DeclareUnicodeCharacter{0119}{\ogonek{e}} + \DeclareUnicodeCharacter{010A}{\dotaccent{C}} + \DeclareUnicodeCharacter{010B}{\dotaccent{c}} + \DeclareUnicodeCharacter{010C}{\v{C}} + \DeclareUnicodeCharacter{010D}{\v{c}} + \DeclareUnicodeCharacter{010E}{\v{D}} + + \DeclareUnicodeCharacter{0112}{\=E} + \DeclareUnicodeCharacter{0113}{\=e} + \DeclareUnicodeCharacter{0114}{\u{E}} + \DeclareUnicodeCharacter{0115}{\u{e}} + \DeclareUnicodeCharacter{0116}{\dotaccent{E}} + \DeclareUnicodeCharacter{0117}{\dotaccent{e}} + \DeclareUnicodeCharacter{011A}{\v{E}} + \DeclareUnicodeCharacter{011B}{\v{e}} + \DeclareUnicodeCharacter{011C}{\^G} + \DeclareUnicodeCharacter{011D}{\^g} + \DeclareUnicodeCharacter{011E}{\u{G}} + \DeclareUnicodeCharacter{011F}{\u{g}} + + \DeclareUnicodeCharacter{0120}{\dotaccent{G}} + \DeclareUnicodeCharacter{0121}{\dotaccent{g}} + \DeclareUnicodeCharacter{0124}{\^H} + \DeclareUnicodeCharacter{0125}{\^h} + \DeclareUnicodeCharacter{0128}{\~I} + \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}} + \DeclareUnicodeCharacter{012A}{\=I} + \DeclareUnicodeCharacter{012B}{\={\dotless{i}}} + \DeclareUnicodeCharacter{012C}{\u{I}} + \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}} + + \DeclareUnicodeCharacter{0130}{\dotaccent{I}} + \DeclareUnicodeCharacter{0131}{\dotless{i}} + \DeclareUnicodeCharacter{0132}{IJ} + \DeclareUnicodeCharacter{0133}{ij} + \DeclareUnicodeCharacter{0134}{\^J} + \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}} + \DeclareUnicodeCharacter{0139}{\'L} + \DeclareUnicodeCharacter{013A}{\'l} + + \DeclareUnicodeCharacter{0141}{\L} + \DeclareUnicodeCharacter{0142}{\l} + \DeclareUnicodeCharacter{0143}{\'N} + \DeclareUnicodeCharacter{0144}{\'n} + \DeclareUnicodeCharacter{0147}{\v{N}} + \DeclareUnicodeCharacter{0148}{\v{n}} + \DeclareUnicodeCharacter{014C}{\=O} + \DeclareUnicodeCharacter{014D}{\=o} + \DeclareUnicodeCharacter{014E}{\u{O}} + \DeclareUnicodeCharacter{014F}{\u{o}} + + \DeclareUnicodeCharacter{0150}{\H{O}} + \DeclareUnicodeCharacter{0151}{\H{o}} + \DeclareUnicodeCharacter{0152}{\OE} + \DeclareUnicodeCharacter{0153}{\oe} + \DeclareUnicodeCharacter{0154}{\'R} + \DeclareUnicodeCharacter{0155}{\'r} + \DeclareUnicodeCharacter{0158}{\v{R}} + \DeclareUnicodeCharacter{0159}{\v{r}} + \DeclareUnicodeCharacter{015A}{\'S} + \DeclareUnicodeCharacter{015B}{\'s} + \DeclareUnicodeCharacter{015C}{\^S} + \DeclareUnicodeCharacter{015D}{\^s} + \DeclareUnicodeCharacter{015E}{\cedilla{S}} + \DeclareUnicodeCharacter{015F}{\cedilla{s}} + + \DeclareUnicodeCharacter{0160}{\v{S}} + \DeclareUnicodeCharacter{0161}{\v{s}} + \DeclareUnicodeCharacter{0162}{\cedilla{t}} + \DeclareUnicodeCharacter{0163}{\cedilla{T}} + \DeclareUnicodeCharacter{0164}{\v{T}} + + \DeclareUnicodeCharacter{0168}{\~U} + \DeclareUnicodeCharacter{0169}{\~u} + \DeclareUnicodeCharacter{016A}{\=U} + \DeclareUnicodeCharacter{016B}{\=u} + \DeclareUnicodeCharacter{016C}{\u{U}} + \DeclareUnicodeCharacter{016D}{\u{u}} + \DeclareUnicodeCharacter{016E}{\ringaccent{U}} + \DeclareUnicodeCharacter{016F}{\ringaccent{u}} + + \DeclareUnicodeCharacter{0170}{\H{U}} + \DeclareUnicodeCharacter{0171}{\H{u}} + \DeclareUnicodeCharacter{0174}{\^W} + \DeclareUnicodeCharacter{0175}{\^w} + \DeclareUnicodeCharacter{0176}{\^Y} + \DeclareUnicodeCharacter{0177}{\^y} + \DeclareUnicodeCharacter{0178}{\"Y} + \DeclareUnicodeCharacter{0179}{\'Z} + \DeclareUnicodeCharacter{017A}{\'z} + \DeclareUnicodeCharacter{017B}{\dotaccent{Z}} + \DeclareUnicodeCharacter{017C}{\dotaccent{z}} + \DeclareUnicodeCharacter{017D}{\v{Z}} + \DeclareUnicodeCharacter{017E}{\v{z}} + + \DeclareUnicodeCharacter{01C4}{D\v{Z}} + \DeclareUnicodeCharacter{01C5}{D\v{z}} + \DeclareUnicodeCharacter{01C6}{d\v{z}} + \DeclareUnicodeCharacter{01C7}{LJ} + \DeclareUnicodeCharacter{01C8}{Lj} + \DeclareUnicodeCharacter{01C9}{lj} + \DeclareUnicodeCharacter{01CA}{NJ} + \DeclareUnicodeCharacter{01CB}{Nj} + \DeclareUnicodeCharacter{01CC}{nj} + \DeclareUnicodeCharacter{01CD}{\v{A}} + \DeclareUnicodeCharacter{01CE}{\v{a}} + \DeclareUnicodeCharacter{01CF}{\v{I}} + + \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}} + \DeclareUnicodeCharacter{01D1}{\v{O}} + \DeclareUnicodeCharacter{01D2}{\v{o}} + \DeclareUnicodeCharacter{01D3}{\v{U}} + \DeclareUnicodeCharacter{01D4}{\v{u}} + + \DeclareUnicodeCharacter{01E2}{\={\AE}} + \DeclareUnicodeCharacter{01E3}{\={\ae}} + \DeclareUnicodeCharacter{01E6}{\v{G}} + \DeclareUnicodeCharacter{01E7}{\v{g}} + \DeclareUnicodeCharacter{01E8}{\v{K}} + \DeclareUnicodeCharacter{01E9}{\v{k}} + + \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}} + \DeclareUnicodeCharacter{01F1}{DZ} + \DeclareUnicodeCharacter{01F2}{Dz} + \DeclareUnicodeCharacter{01F3}{dz} + \DeclareUnicodeCharacter{01F4}{\'G} + \DeclareUnicodeCharacter{01F5}{\'g} + \DeclareUnicodeCharacter{01F8}{\`N} + \DeclareUnicodeCharacter{01F9}{\`n} + \DeclareUnicodeCharacter{01FC}{\'{\AE}} + \DeclareUnicodeCharacter{01FD}{\'{\ae}} + \DeclareUnicodeCharacter{01FE}{\'{\O}} + \DeclareUnicodeCharacter{01FF}{\'{\o}} + + \DeclareUnicodeCharacter{021E}{\v{H}} + \DeclareUnicodeCharacter{021F}{\v{h}} + + \DeclareUnicodeCharacter{0226}{\dotaccent{A}} + \DeclareUnicodeCharacter{0227}{\dotaccent{a}} + \DeclareUnicodeCharacter{0228}{\cedilla{E}} + \DeclareUnicodeCharacter{0229}{\cedilla{e}} + \DeclareUnicodeCharacter{022E}{\dotaccent{O}} + \DeclareUnicodeCharacter{022F}{\dotaccent{o}} + + \DeclareUnicodeCharacter{0232}{\=Y} + \DeclareUnicodeCharacter{0233}{\=y} + \DeclareUnicodeCharacter{0237}{\dotless{j}} + + \DeclareUnicodeCharacter{02DB}{\ogonek{ }} + + \DeclareUnicodeCharacter{1E02}{\dotaccent{B}} + \DeclareUnicodeCharacter{1E03}{\dotaccent{b}} + \DeclareUnicodeCharacter{1E04}{\udotaccent{B}} + \DeclareUnicodeCharacter{1E05}{\udotaccent{b}} + \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}} + \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}} + \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}} + \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}} + \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}} + \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}} + \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}} + \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}} + + \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}} + \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}} + + \DeclareUnicodeCharacter{1E20}{\=G} + \DeclareUnicodeCharacter{1E21}{\=g} + \DeclareUnicodeCharacter{1E22}{\dotaccent{H}} + \DeclareUnicodeCharacter{1E23}{\dotaccent{h}} + \DeclareUnicodeCharacter{1E24}{\udotaccent{H}} + \DeclareUnicodeCharacter{1E25}{\udotaccent{h}} + \DeclareUnicodeCharacter{1E26}{\"H} + \DeclareUnicodeCharacter{1E27}{\"h} + + \DeclareUnicodeCharacter{1E30}{\'K} + \DeclareUnicodeCharacter{1E31}{\'k} + \DeclareUnicodeCharacter{1E32}{\udotaccent{K}} + \DeclareUnicodeCharacter{1E33}{\udotaccent{k}} + \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}} + \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}} + \DeclareUnicodeCharacter{1E36}{\udotaccent{L}} + \DeclareUnicodeCharacter{1E37}{\udotaccent{l}} + \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}} + \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}} + \DeclareUnicodeCharacter{1E3E}{\'M} + \DeclareUnicodeCharacter{1E3F}{\'m} + + \DeclareUnicodeCharacter{1E40}{\dotaccent{M}} + \DeclareUnicodeCharacter{1E41}{\dotaccent{m}} + \DeclareUnicodeCharacter{1E42}{\udotaccent{M}} + \DeclareUnicodeCharacter{1E43}{\udotaccent{m}} + \DeclareUnicodeCharacter{1E44}{\dotaccent{N}} + \DeclareUnicodeCharacter{1E45}{\dotaccent{n}} + \DeclareUnicodeCharacter{1E46}{\udotaccent{N}} + \DeclareUnicodeCharacter{1E47}{\udotaccent{n}} + \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}} + \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}} + + \DeclareUnicodeCharacter{1E54}{\'P} + \DeclareUnicodeCharacter{1E55}{\'p} + \DeclareUnicodeCharacter{1E56}{\dotaccent{P}} + \DeclareUnicodeCharacter{1E57}{\dotaccent{p}} + \DeclareUnicodeCharacter{1E58}{\dotaccent{R}} + \DeclareUnicodeCharacter{1E59}{\dotaccent{r}} + \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}} + \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}} + \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}} + \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}} + + \DeclareUnicodeCharacter{1E60}{\dotaccent{S}} + \DeclareUnicodeCharacter{1E61}{\dotaccent{s}} + \DeclareUnicodeCharacter{1E62}{\udotaccent{S}} + \DeclareUnicodeCharacter{1E63}{\udotaccent{s}} + \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}} + \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}} + \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}} + \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}} + \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}} + \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}} + + \DeclareUnicodeCharacter{1E7C}{\~V} + \DeclareUnicodeCharacter{1E7D}{\~v} + \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}} + \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}} + + \DeclareUnicodeCharacter{1E80}{\`W} + \DeclareUnicodeCharacter{1E81}{\`w} + \DeclareUnicodeCharacter{1E82}{\'W} + \DeclareUnicodeCharacter{1E83}{\'w} + \DeclareUnicodeCharacter{1E84}{\"W} + \DeclareUnicodeCharacter{1E85}{\"w} + \DeclareUnicodeCharacter{1E86}{\dotaccent{W}} + \DeclareUnicodeCharacter{1E87}{\dotaccent{w}} + \DeclareUnicodeCharacter{1E88}{\udotaccent{W}} + \DeclareUnicodeCharacter{1E89}{\udotaccent{w}} + \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}} + \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}} + \DeclareUnicodeCharacter{1E8C}{\"X} + \DeclareUnicodeCharacter{1E8D}{\"x} + \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}} + \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}} + + \DeclareUnicodeCharacter{1E90}{\^Z} + \DeclareUnicodeCharacter{1E91}{\^z} + \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}} + \DeclareUnicodeCharacter{1E93}{\udotaccent{z}} + \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}} + \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}} + \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}} + \DeclareUnicodeCharacter{1E97}{\"t} + \DeclareUnicodeCharacter{1E98}{\ringaccent{w}} + \DeclareUnicodeCharacter{1E99}{\ringaccent{y}} + + \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}} + \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}} + + \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}} + \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}} + \DeclareUnicodeCharacter{1EBC}{\~E} + \DeclareUnicodeCharacter{1EBD}{\~e} + + \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}} + \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}} + \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}} + \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}} + + \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}} + \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}} + + \DeclareUnicodeCharacter{1EF2}{\`Y} + \DeclareUnicodeCharacter{1EF3}{\`y} + \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}} + + \DeclareUnicodeCharacter{1EF8}{\~Y} + \DeclareUnicodeCharacter{1EF9}{\~y} + + \DeclareUnicodeCharacter{2013}{--} + \DeclareUnicodeCharacter{2014}{---} + \DeclareUnicodeCharacter{2018}{\quoteleft} + \DeclareUnicodeCharacter{2019}{\quoteright} + \DeclareUnicodeCharacter{201A}{\quotesinglbase} + \DeclareUnicodeCharacter{201C}{\quotedblleft} + \DeclareUnicodeCharacter{201D}{\quotedblright} + \DeclareUnicodeCharacter{201E}{\quotedblbase} + \DeclareUnicodeCharacter{2022}{\bullet} + \DeclareUnicodeCharacter{2026}{\dots} + \DeclareUnicodeCharacter{2039}{\guilsinglleft} + \DeclareUnicodeCharacter{203A}{\guilsinglright} + \DeclareUnicodeCharacter{20AC}{\euro} + + \DeclareUnicodeCharacter{2192}{\expansion} + \DeclareUnicodeCharacter{21D2}{\result} + + \DeclareUnicodeCharacter{2212}{\minus} + \DeclareUnicodeCharacter{2217}{\point} + \DeclareUnicodeCharacter{2261}{\equiv} +}% end of \utfeightchardefs + + +% US-ASCII character definitions. +\def\asciichardefs{% nothing need be done + \relax +} + +% Make non-ASCII characters printable again for compatibility with +% existing Texinfo documents that may use them, even without declaring a +% document encoding. +% +\setnonasciicharscatcode \other + + +\message{formatting,} + +\newdimen\defaultparindent \defaultparindent = 15pt + +\chapheadingskip = 15pt plus 4pt minus 2pt +\secheadingskip = 12pt plus 3pt minus 2pt +\subsecheadingskip = 9pt plus 2pt minus 2pt + +% Prevent underfull vbox error messages. +\vbadness = 10000 + +% Don't be very finicky about underfull hboxes, either. +\hbadness = 6666 + +% Following George Bush, get rid of widows and orphans. +\widowpenalty=10000 +\clubpenalty=10000 + +% Use TeX 3.0's \emergencystretch to help line breaking, but if we're +% using an old version of TeX, don't do anything. We want the amount of +% stretch added to depend on the line length, hence the dependence on +% \hsize. We call this whenever the paper size is set. +% +\def\setemergencystretch{% + \ifx\emergencystretch\thisisundefined + % Allow us to assign to \emergencystretch anyway. + \def\emergencystretch{\dimen0}% + \else + \emergencystretch = .15\hsize + \fi +} + +% Parameters in order: 1) textheight; 2) textwidth; +% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip; +% 7) physical page height; 8) physical page width. +% +% We also call \setleading{\textleading}, so the caller should define +% \textleading. The caller should also set \parskip. +% +\def\internalpagesizes#1#2#3#4#5#6#7#8{% + \voffset = #3\relax + \topskip = #6\relax + \splittopskip = \topskip + % + \vsize = #1\relax + \advance\vsize by \topskip + \outervsize = \vsize + \advance\outervsize by 2\topandbottommargin + \pageheight = \vsize + % + \hsize = #2\relax + \outerhsize = \hsize + \advance\outerhsize by 0.5in + \pagewidth = \hsize + % + \normaloffset = #4\relax + \bindingoffset = #5\relax + % + \ifpdf + \pdfpageheight #7\relax + \pdfpagewidth #8\relax + % if we don't reset these, they will remain at "1 true in" of + % whatever layout pdftex was dumped with. + \pdfhorigin = 1 true in + \pdfvorigin = 1 true in + \fi + % + \setleading{\textleading} + % + \parindent = \defaultparindent + \setemergencystretch +} + +% @letterpaper (the default). +\def\letterpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % If page is nothing but text, make it come out even. + \internalpagesizes{607.2pt}{6in}% that's 46 lines + {\voffset}{.25in}% + {\bindingoffset}{36pt}% + {11in}{8.5in}% +}} + +% Use @smallbook to reset parameters for 7x9.25 trim size. +\def\smallbook{{\globaldefs = 1 + \parskip = 2pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.5in}{5in}% + {-.2in}{0in}% + {\bindingoffset}{16pt}% + {9.25in}{7in}% + % + \lispnarrowing = 0.3in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .5cm +}} + +% Use @smallerbook to reset parameters for 6x9 trim size. +% (Just testing, parameters still in flux.) +\def\smallerbook{{\globaldefs = 1 + \parskip = 1.5pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.4in}{4.8in}% + {-.2in}{-.4in}% + {0pt}{14pt}% + {9in}{6in}% + % + \lispnarrowing = 0.25in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .4cm +}} + +% Use @afourpaper to print on European A4 paper. +\def\afourpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % Double-side printing via postscript on Laserjet 4050 + % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm. + % To change the settings for a different printer or situation, adjust + % \normaloffset until the front-side and back-side texts align. Then + % do the same for \bindingoffset. You can set these for testing in + % your texinfo source file like this: + % @tex + % \global\normaloffset = -6mm + % \global\bindingoffset = 10mm + % @end tex + \internalpagesizes{673.2pt}{160mm}% that's 51 lines + {\voffset}{\hoffset}% + {\bindingoffset}{44pt}% + {297mm}{210mm}% + % + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = 5mm +}} + +% Use @afivepaper to print on European A5 paper. +% From romildo@urano.iceb.ufop.br, 2 July 2000. +% He also recommends making @example and @lisp be small. +\def\afivepaper{{\globaldefs = 1 + \parskip = 2pt plus 1pt minus 0.1pt + \textleading = 12.5pt + % + \internalpagesizes{160mm}{120mm}% + {\voffset}{\hoffset}% + {\bindingoffset}{8pt}% + {210mm}{148mm}% + % + \lispnarrowing = 0.2in + \tolerance = 800 + \hfuzz = 1.2pt + \contentsrightmargin = 0pt + \defbodyindent = 2mm + \tableindent = 12mm +}} + +% A specific text layout, 24x15cm overall, intended for A4 paper. +\def\afourlatex{{\globaldefs = 1 + \afourpaper + \internalpagesizes{237mm}{150mm}% + {\voffset}{4.6mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + % + % Must explicitly reset to 0 because we call \afourpaper. + \globaldefs = 0 +}} + +% Use @afourwide to print on A4 paper in landscape format. +\def\afourwide{{\globaldefs = 1 + \afourpaper + \internalpagesizes{241mm}{165mm}% + {\voffset}{-2.95mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + \globaldefs = 0 +}} + +% @pagesizes TEXTHEIGHT[,TEXTWIDTH] +% Perhaps we should allow setting the margins, \topskip, \parskip, +% and/or leading, also. Or perhaps we should compute them somehow. +% +\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} +\def\pagesizesyyy#1,#2,#3\finish{{% + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi + \globaldefs = 1 + % + \parskip = 3pt plus 2pt minus 1pt + \setleading{\textleading}% + % + \dimen0 = #1\relax + \advance\dimen0 by \voffset + % + \dimen2 = \hsize + \advance\dimen2 by \normaloffset + % + \internalpagesizes{#1}{\hsize}% + {\voffset}{\normaloffset}% + {\bindingoffset}{44pt}% + {\dimen0}{\dimen2}% +}} + +% Set default to letter. +% +\letterpaper + + +\message{and turning on texinfo input format.} + +\def^^L{\par} % remove \outer, so ^L can appear in an @comment + +% DEL is a comment character, in case @c does not suffice. +\catcode`\^^? = 14 + +% Define macros to output various characters with catcode for normal text. +\catcode`\"=\other \def\normaldoublequote{"} +\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix +\catcode`\+=\other \def\normalplus{+} +\catcode`\<=\other \def\normalless{<} +\catcode`\>=\other \def\normalgreater{>} +\catcode`\^=\other \def\normalcaret{^} +\catcode`\_=\other \def\normalunderscore{_} +\catcode`\|=\other \def\normalverticalbar{|} +\catcode`\~=\other \def\normaltilde{~} + +% This macro is used to make a character print one way in \tt +% (where it can probably be output as-is), and another way in other fonts, +% where something hairier probably needs to be done. +% +% #1 is what to print if we are indeed using \tt; #2 is what to print +% otherwise. Since all the Computer Modern typewriter fonts have zero +% interword stretch (and shrink), and it is reasonable to expect all +% typewriter fonts to have this, we can check that font parameter. +% +\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} + +% Same as above, but check for italic font. Actually this also catches +% non-italic slanted fonts since it is impossible to distinguish them from +% italic fonts. But since this is only used by $ and it uses \sl anyway +% this is not a problem. +\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} + +% Turn off all special characters except @ +% (and those which the user can use as if they were ordinary). +% Most of these we simply print from the \tt font, but for some, we can +% use math or other variants that look better in normal text. + +\catcode`\"=\active +\def\activedoublequote{{\tt\char34}} +\let"=\activedoublequote +\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde +\chardef\hat=`\^ +\catcode`\^=\active \def\activehat{{\tt \hat}} \let^ = \activehat + +\catcode`\_=\active +\def_{\ifusingtt\normalunderscore\_} +\let\realunder=_ +% Subroutine for the previous macro. +\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } + +\catcode`\|=\active +\def|{{\tt\char124}} + +\chardef \less=`\< +\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless +\chardef \gtr=`\> +\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr +\catcode`\+=\active \def+{{\tt \char 43}} +\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix + +% used for headline/footline in the output routine, in case the page +% breaks in the middle of an @tex block. +\def\texinfochars{% + \let< = \activeless + \let> = \activegtr + \let~ = \activetilde + \let^ = \activehat + \markupsetuplqdefault \markupsetuprqdefault + \let\b = \strong + \let\i = \smartitalic + % in principle, all other definitions in \tex have to be undone too. +} + +% If a .fmt file is being used, characters that might appear in a file +% name cannot be active until we have parsed the command line. +% So turn them off again, and have \everyjob (or @setfilename) turn them on. +% \otherifyactive is called near the end of this file. +\def\otherifyactive{\catcode`+=\other \catcode`\_=\other} + +% Used sometimes to turn off (effectively) the active characters even after +% parsing them. +\def\turnoffactive{% + \normalturnoffactive + \otherbackslash +} + +\catcode`\@=0 + +% \backslashcurfont outputs one backslash character in current font, +% as in \char`\\. +\global\chardef\backslashcurfont=`\\ +\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work + +% \realbackslash is an actual character `\' with catcode other, and +% \doublebackslash is two of them (for the pdf outlines). +{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} + +% In texinfo, backslash is an active character; it prints the backslash +% in fixed width font. +\catcode`\\=\active % @ for escape char from now on. + +% The story here is that in math mode, the \char of \backslashcurfont +% ends up printing the roman \ from the math symbol font (because \char +% in math mode uses the \mathcode, and plain.tex sets +% \mathcode`\\="026E). It seems better for @backslashchar{} to always +% print a typewriter backslash, hence we use an explicit \mathchar, +% which is the decimal equivalent of "715c (class 7, e.g., use \fam; +% ignored family value; char position "5C). We can't use " for the +% usual hex value because it has already been made active. +@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}} +@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents. + +% On startup, @fixbackslash assigns: +% @let \ = @normalbackslash +% \rawbackslash defines an active \ to do \backslashcurfont. +% \otherbackslash defines an active \ to be a literal `\' character with +% catcode other. We switch back and forth between these. +@gdef@rawbackslash{@let\=@backslashcurfont} +@gdef@otherbackslash{@let\=@realbackslash} + +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. Also revert - to its normal character, in +% case the active - from code has slipped in. +% +{@catcode`- = @active + @gdef@normalturnoffactive{% + @let-=@normaldash + @let"=@normaldoublequote + @let$=@normaldollar %$ font-lock fix + @let+=@normalplus + @let<=@normalless + @let>=@normalgreater + @let\=@normalbackslash + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let~=@normaltilde + @markupsetuplqdefault + @markupsetuprqdefault + @unsepspaces + } +} + +% Make _ and + \other characters, temporarily. +% This is canceled by @fixbackslash. +@otherifyactive + +% If a .fmt file is being used, we don't want the `\input texinfo' to show up. +% That is what \eatinput is for; after that, the `\' should revert to printing +% a backslash. +% +@gdef@eatinput input texinfo{@fixbackslash} +@global@let\ = @eatinput + +% On the other hand, perhaps the file did not have a `\input texinfo'. Then +% the first `\' in the file would cause an error. This macro tries to fix +% that, assuming it is called before the first `\' could plausibly occur. +% Also turn back on active characters that might appear in the input +% file name, in case not using a pre-dumped format. +% +@gdef@fixbackslash{% + @ifx\@eatinput @let\ = @normalbackslash @fi + @catcode`+=@active + @catcode`@_=@active +} + +% Say @foo, not \foo, in error messages. +@escapechar = `@@ + +% These (along with & and #) are made active for url-breaking, so need +% active definitions as the normal characters. +@def@normaldot{.} +@def@normalquest{?} +@def@normalslash{/} + +% These look ok in all fonts, so just make them not special. +% @hashchar{} gets its own user-level command, because of #line. +@catcode`@& = @other @def@normalamp{&} +@catcode`@# = @other @def@normalhash{#} +@catcode`@% = @other @def@normalpercent{%} + +@let @hashchar = @normalhash + +@c Finally, make ` and ' active, so that txicodequoteundirected and +@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we +@c don't make ` and ' active, @code will not get them as active chars. +@c Do this last of all since we use ` in the previous @catcode assignments. +@catcode`@'=@active +@catcode`@`=@active +@markupsetuplqdefault +@markupsetuprqdefault + +@c Local variables: +@c eval: (add-hook 'write-file-hooks 'time-stamp) +@c page-delimiter: "^\\\\message" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d.%02H" +@c time-stamp-end: "}" +@c End: + +@c vim:sw=2: + +@ignore + arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 +@end ignore -- cgit v1.2.1