Merge conflict

1 files changed, 0 insertions, 683 deletions

diff --git a/elpa/auctex-13.1.3/doc/tex-ref.tex b/elpa/auctex-13.1.3/doc/tex-ref.tex
deleted file mode 100644
index a7dfa34..0000000
--- a/elpa/auctex-13.1.3/doc/tex-ref.tex
+++ /dev/null
@@ -1,683 +0,0 @@
-% Reference Card for AUCTeX version 13.1
-%**start of header
-\newcount\columnsperpage
-
-% This file has only been checked with 3 columns per page.  But it
-% should print fine either via DVI or PDFTeX.
-
-\columnsperpage=3
-
-% Papersize stuff.  Use default paper size for PDF, but switch
-% orientation.  Use papersize special for dvips.
-
-\ifx\pdfoutput\undefined
-  \csname newcount\endcsname\pdfoutput
-  \pdfoutput=0
-\fi
-
-\ifnum\pdfoutput=0
-%    \special{papersize 8.5in,11in}%
-     \special{papersize 297mm,210mm}%
-\else
-      \dimen0\pdfpagewidth
-      \pdfpagewidth\pdfpageheight
-      \pdfpageheight\dimen0
-\fi
-
-
-% This file is intended to be processed by plain TeX (TeX82).
-% compile-command: "tex tex-ref" or "pdftex tex-ref"
-%
-% Original author of Auc-TeX Reference Card:
-%
-%       Terrence Brannon, PO Box 5027, Bethlehem, PA 18015 , USA
-%  internet: tb06@pl118f.cc.lehigh.edu  (215) 758-1720 (215) 758-2104
-%
-% Kresten Krab Thorup updated the reference card to 6.
-% Per Abrahamsen updated the reference card to 7, 8, and 9.
-% Ralf Angeli updated it to 11.50.
-% And David Kastrup messed around with it, too, merging the math reference.
-%
-% Thanks to Stephen Gildea
-% Paul Rubin, Bob Chassell, Len Tower, and Richard Mlynarik
-% for creating the GNU Emacs Reference Card from which this was mutated
-
-\def\versionnumber{13.1}
-\def\year{2022}
-\def\version{February \year\ v\versionnumber}
-
-\def\shortcopyrightnotice{\vskip 1ex plus 2 fill
-  \centerline{\small \copyright\ \year\ Free Software Foundation, Inc.
-  Permissions on back.  v\versionnumber}}
-
-\def\copyrightnotice{%
-\vskip 1ex plus 2 fill\begingroup\small
-\centerline{Copyright \copyright\ 1987, 1992-1994, 2004-2006, 2008, 2010,}
-\centerline{2012, 2014-2017, 2019-2022 Free Software Foundation, Inc.}
-\centerline{for AUC\TeX\ version \versionnumber}
-
-Permission is granted to make and distribute copies of
-this card provided the copyright notice and this permission notice
-are preserved on all copies.
-
-
-\endgroup}
-
-% make \bye not \outer so that the \def\bye in the \else clause below
-% can be scanned without complaint.
-\def\bye{\par\vfill\supereject\end}
-
-\newdimen\intercolumnskip
-\newbox\columna
-\newbox\columnb
-
-\edef\ncolumns{\the\columnsperpage}
-
-\message{[\ncolumns\space
-  column\if 1\ncolumns\else s\fi\space per page]}
-
-\def\scaledmag#1{ scaled \magstep #1}
-
-% This multi-way format was designed by Stephen Gildea
-% October 1986.
-\if 1\ncolumns
-  \hsize 4in
-  \vsize 10in
-  \voffset -.7in
-  \font\titlefont=\fontname\tenbf \scaledmag3
-  \font\headingfont=\fontname\tenbf \scaledmag2
-  \font\smallfont=\fontname\sevenrm
-  \font\smallsy=\fontname\sevensy
-
-  \footline{\hss\folio}
-  \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}}
-\else
-  \hsize 3.2in
-  \vsize 7.6in
-  \hoffset -.75in
-  \voffset -.8in
-  \font\titlefont=cmbx10 \scaledmag2
-  \font\headingfont=cmbx10 \scaledmag1
-  \font\smallfont=cmr6
-  \font\smallsy=cmsy6
-  \font\eightrm=cmr8
-  \font\eightbf=cmbx8
-  \font\eightit=cmti8
-  \font\eighttt=cmtt8
-  \font\eightsl=cmsl8
-  \font\eightsc=cmcsc8
-  \font\eightsy=cmsy8
-  \textfont0=\eightrm
-  \textfont2=\eightsy
-  \def\rm{\fam0 \eightrm}
-  \def\bf{\eightbf}
-  \def\it{\eightit}
-  \def\tt{\eighttt}
-  \def\sl{\eightsl}
-  \def\sc{\eightsc}
-  \normalbaselineskip=.8\normalbaselineskip
-  \ht\strutbox.8\ht\strutbox
-  \dp\strutbox.8\dp\strutbox
-  \normallineskip=.8\normallineskip
-  \normallineskiplimit=.8\normallineskiplimit
-  \normalbaselines\rm           %make definitions take effect
-
-  \if 2\ncolumns
-    \let\maxcolumn=b
-    \footline{\hss\rm\folio\hss}
-    \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}}
-  \else \if 3\ncolumns
-    \let\maxcolumn=c
-    \nopagenumbers
-  \else
-    \errhelp{You must set \columnsperpage equal to 1, 2, or 3.}
-    \errmessage{Illegal number of columns per page}
-  \fi\fi
-
-  \intercolumnskip=.46in
-  \def\abc{a}
-  \output={%
-      % This next line is useful when designing the layout.
-      %\immediate\write16{Column \folio\abc\space starts with \firstmark}
-      \if \maxcolumn\abc \multicolumnformat \global\def\abc{a}
-      \else\if a\abc
-        \global\setbox\columna\columnbox \global\def\abc{b}
-        %% in case we never use \columnb (two-column mode)
-        \global\setbox\columnb\hbox to -\intercolumnskip{}
-      \else
-        \global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi}
-  \def\multicolumnformat{\shipout\vbox{\makeheadline
-      \hbox{\box\columna\hskip\intercolumnskip
-        \box\columnb\hskip\intercolumnskip\columnbox}
-      \makefootline}\advancepageno}
-  \def\columnbox{\leftline{\pagebody}}
-
-  \def\bye{\par\vfill\supereject
-    \if a\abc \else\null\vfill\eject\fi
-    \if a\abc \else\null\vfill\eject\fi
-    \end}
-\fi
-
-% we won't be using math mode much, so redefine some of the characters
-% we might want to talk about
-\catcode`\^=12
-\catcode`\_=12
-
-\chardef\\=`\\
-\chardef\{=`\{
-\chardef\}=`\}
-
-\hyphenation{mini-buf-fer}
-
-\parindent 0pt
-\parskip 1ex plus .5ex minus .5ex
-
-\def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip}
-
-\def\newcolumn{\vfill\eject}
-
-\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex}
-
-\def\section#1{\par\vskip 0pt plus 0.2\vsize \penalty-3000
-         \vskip 0pt plus -0.2\vsize
-  \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}%
-  \vskip 2ex plus 1ex minus 1.5ex}
-
-\newdimen\keyindent
-
-\def\beginindentedkeys{\keyindent=1em}
-\def\endindentedkeys{\keyindent=0em}
-\endindentedkeys
-
-\def\paralign{\vskip\parskip\halign}
-
-\def\<#1>{$\langle${\rm #1}$\rangle$}
-
-\def\kbd#1{{\tt#1}\null}        %\null so not an abbrev even if period follows
-\def\var#1{{\tt #1}}
-\def\file#1{{\tt #1}}
-
-\def\beginexample{\par\leavevmode\begingroup
-  \obeylines\obeyspaces\parskip0pt\tt}
-{\obeyspaces\global\let =\ }
-\def\endexample{\endgroup}
-
-\def\key#1#2{\leavevmode\hbox to \hsize{\vtop
-  {\hsize=.68\hsize\rightskip=1em
-  \hskip\keyindent\relax#1}\kbd{#2}\hfil}}
-
-\newbox\metaxbox
-\setbox\metaxbox\hbox{\kbd{M-x }}
-\newdimen\metaxwidth
-\metaxwidth=\wd\metaxbox
-
-\def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize
-  {\hskip\keyindent\relax#1\hfil}%
-  \hskip -\metaxwidth minus 1fil
-  \kbd{#2}\hfil}}
-
-\def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\quad
-  &\kbd{#3}\quad\cr}
-
-\def\LaTeX{%
-    L\kern-.36em\raise.3ex\hbox{\sc{a}}\kern-.15em\TeX}
-
-%**end of header
-
-\title{AUC\TeX\ Reference Card}
-
-\centerline{(for version \versionnumber)}
-
-\section{Conventions Used}
-
-\key{Carriage Return or \kbd{C-m}}{RET}
-\key{Tabular or \kbd{C-i}}{TAB}
-\key{Linefeed or \kbd{C-j}}{LFD}
-
-\section{Shell Interaction}
-
-\key{Run a command on the master file}{C-c C-c}
-\key{Run a command on the buffer}{C-c C-b}
-\key{Run a command on the region}{C-c C-r}
-\key{Fix the region}{C-c C-t C-r}
-\key{Kill job}{C-c C-k}
-\key{Recenter output buffer}{C-c C-l}
-\key{Next error in \TeX/\LaTeX\ session}{C-c `}
-\key{Previous error in \TeX/\LaTeX\ session}{M-g p}
-\key{Toggle debug of bad boxes}{C-c C-t C-b}
-\key{Toggle debug of warnings}{C-c C-t C-w}
-\key{View output file}{C-c C-v}
-\key{Compile all and view output file}{C-c C-a}
-
-Commands you can run on the master file (with \kbd{C-c C-c}) or the
-region (with \kbd{C-c C-r}) include the following (starred versions
-are not available in all modes):
-
-\def\star{\llap{\rm*}}
-\key{\TeX}{\star TeX}
-\key{\LaTeX}{\star LaTeX}
-\key{Con\TeX{}t (once)}{\star ConTeXt}
-\key{Con\TeX{}t Full}{\star ConTeXt Full}
-\key{Makeinfo}{\star Makeinfo}
-\key{Makeinfo with HTML output}{\star Makeinfo HTML}
-\key{Appropriate previewer}{View}
-\key{Print the output}{Print}
-\key{Bib\TeX}{BibTeX}
-\key{Biber}{Biber}
-\key{MakeIndex}{Index}
-\key{LaCheck}{Check}
-\key{Make (PostScript) File}{File}
-\key{Ispell}{Spell}
-\key{Delete intermediate files}{Clean}
-\key{Delete all output files}{Clean All}
-
-\section{\TeX ing options}
-\TeX\ runs can come in various types, which may be toggled and are
-indicated in the mode line.
-
-\key{PDF/DVI mode}{C-c C-t C-p}
-\key{Stop on errors (Interactive mode)}{C-c C-t C-i}
-\key{I/O correlation (S. Specials, Sync\TeX)}{C-c C-t C-s}
-
-\section{Miscellaneous}
-
-\key{Read AUC\TeX\ manual}{C-c TAB}
-\key{Find documentation}{C-c ?}
-\key{Math Mode}{C-c \string~}
-\key{Reset Buffer}{C-c C-n}
-\key{Reset AUC\TeX}{C-u C-c C-n}
-
-\section{Multifile Handling}
-
-\key{Save Document}{C-c C-d}
-\key{Switch to master file or active buffer}{C-c ^}
-\key{Query for a master file}{C-c \_}
-
-\section{Command Insertion}
-
-\key{Insert Section}{C-c C-s}
-\key{Insert \LaTeX\ environment}{C-c C-e}
-\key{Insert item}{C-c LFD}
-\key{Insert item (alias)}{M-RET}
-\key{Close \LaTeX\ environment}{C-c ]}
-\key{Insert \TeX\ macro \kbd{\{\}} }{C-c C-m}
-\key{Insert double brace}{C-c \{}
-\key{Complete \TeX\ macro}{M-TAB}
-\key{Smart ``quote''}{"}
-\key{Smart ``dollar''}{\$}
-
-\section{Font Selection}
-
-\key{Insert {\bf bold\/} text}{C-c C-f C-b}
-\key{Insert {\it italics\/} text}{C-c C-f C-i}
-\key{Insert {\rm roman} text}{C-c C-f C-r}
-\key{Insert {\it emphasized\/} text}{C-c C-f C-e}
-\key{Insert {\tt typewriter\/} text}{C-c C-f C-t}
-\key{Insert {\sl slanted\/} text}{C-c C-f C-s}
-\key{Insert {\sc Small Caps\/} text}{C-c C-f C-c}
-\key{Delete font}{C-c C-f C-d}
-\key{Replace font}{C-u C-c C-f \<key>}
-
-\section{Source Formatting}
-
-\key{Indent current line}{TAB}
-\key{Indent next line}{LFD}
-
-\key{Format a paragraph}{M-q}
-\key{Format a region}{C-c C-q C-r}
-\key{Format a section}{C-c C-q C-s}
-\key{Format an environment}{C-c C-q C-e}
-
-\key{Mark an environment}{C-c .}
-\key{Mark a section}{C-c *}
-
-\key{Comment or uncomment region}{C-c ;}
-\key{Comment or uncomment paragraph}{C-c \%}
-
-\copyrightnotice
-
-\newcolumn
-
-\title{Math Mode}
-
-\section{Variables}
-
-All math mode commands are under the prefix key specified by
-\var{LaTeX-math-abbrev-prefix}, default is ``\kbd{`}''.
-
-You can define your own math mode commands by setting the variable
-\var{LaTeX-math-list} before enabling \var{LaTeX-math-mode}.
-
-\section{Greek Letters}
-
-\def\disp#1{\hbox to 6ex{$#1$\hfill}}
-\def\twocol#1\par{{%
-  \def\key##1##2{##1&##2\cr}%
-  \setbox0\vbox{\halign to 0.45\hsize{\tabskip0ptplus1fil\relax
-    ##\hfil&\kbd{##}\hfil\cr\vrule width0ptheight\ht\strutbox#1}}%
-  \line{%
-  \splittopskip=\ht\strutbox
-  \dimen0\ht0
-  \advance\dimen0\baselineskip
-  \setbox2\vsplit0to0.5\dimen0
-  \vtop{\unvbox2}\hfill\raise \ht\strutbox \vtop {\unvbox0}}}}
-\def\keycs#1#2#{\keycsii#1{#2}}
-\def\keycsii#1#2#3{\key{\disp{#1#2} ({\tt\string#1})}{#3}}
-
-\twocol
-\keycs\alpha{a}
-\keycs\beta{b}
-\keycs\gamma{g}
-\keycs\delta{d}
-\keycs\epsilon{e}
-\keycs\zeta{z}
-\keycs\eta{h}
-\keycs\theta{j}
-\keycs\kappa{k}
-\keycs\lambda{l}
-\keycs\mu{m}
-\keycs\nu{n}
-\keycs\xi{x}
-\keycs\pi{p}
-\keycs\rho{r}
-\keycs\sigma{s}
-\keycs\tau{t}
-\keycs\upsilon{u}
-\keycs\phi{f}
-\keycs\chi{q}
-\keycs\psi{y}
-\keycs\omega{w}
-\keycs\Delta{D}
-\keycs\Gamma{G}
-\keycs\Theta{J}
-\keycs\Lambda{L}
-\keycs\Xi{X}
-\keycs\Pi{P}
-\keycs\Sigma{S}
-\keycs\Upsilon{U}
-\keycs\Phi{F}
-\keycs\Psi{Y}
-\keycs\Omega{W}
-
-\section{Symbols}
-
-\twocol
-\keycs\rightarrow{C-f}
-\keycs\leftarrow{C-b}
-\keycs\uparrow{C-p}
-\keycs\downarrow{C-n}
-\keycs\leq{<}
-\keycs\geq{>}
-\keycs\tilde x{\string~}
-\keycs\hat x{^}
-\keycs\nabla{N}
-\keycs\infty{I}
-\keycs\forall{A}
-\keycs\exists{E}
-\keycs\not \ {/}
-\keycs\in{i}
-\keycs\times{*}
-\keycs\cdot{.}
-\keycs\colon{:}
-\keycs\subset{\{}
-\keycs\supset{\}}
-\keycs\subseteq{[}
-\keycs\supseteq{]}
-\keycs\emptyset{0}
-\keycs\setminus{\\}
-\keycs\cup{+}
-\keycs\cap{-}
-\keycs\langle{(}
-\keycs\rangle{)}
-\keycs\exp{C-e}
-\keycs\sin{C-s}
-\keycs\cos{C-c}
-\keycs\sup{C-^}
-\keycs\inf{C-_}
-\keycs\det{C-d}
-\keycs\lim{C-l}
-\keycs\tan{C-t}
-\keycs\vee{|}
-\keycs\wedge{\&}
-
-\section{Miscellaneous}
-
-\key{cal letters}{c \<letter>}
-
-\newcolumn
-
-\def\previewlatex{{preview-latex}}
-\title{\previewlatex}
-\section{Activation}
-\previewlatex\ is part of AUC\TeX.  If it is active, you should see an
-entry ``Preview'' in the menu bar when editing \LaTeX{} files.  If you
-have a ``LaTeX'', but no ``Preview'' menu, add the following to your
-init file (usually \file{\string~/.emacs.d/init.el}):
-\beginexample
-(load "preview-latex.el" nil t t)
-\endexample
-
-\section{Usage and keybindings}
-\previewlatex\ operation only affects the display of the buffer, not
-its contents.  It runs only on demand, using the target {\sc dvi} or
-{\sc PDF} files in the process.  The first command in the following
-list (also on the toolbar button) will (as applicable) repreview an
-active region or a single modified preview, toggle the visibility of
-an unmodified preview or generate previews for a surrounding buffer
-area up to the next preview.
-
-\key{Preview at point}{C-c C-p C-p}
-\key{Preview environment}{C-c C-p C-e}
-\key{Preview region}{C-c C-p C-r}
-\key{Preview buffer}{C-c C-p C-b}
-\key{Preview document}{C-c C-p C-d}
-\key{Remove previews at point}{C-c C-p C-c C-p}
-\key{Remove previews from region}{C-c C-p C-c C-r}
-\key{Remove previews from buffer}{C-c C-p C-c C-b}
-\key{Remove previews from document}{C-c C-p C-c C-d}
-\key{Cache preamble}{C-c C-p C-f}
-\key{Switch off preamble cache}{C-c C-p C-c C-f}
-\key{Read Texinfo manual}{C-c C-p TAB}
-\key{Copy region as MML}{C-c C-p C-w}
-
-The last keysequence will copy a region with previews into the kill
-ring in a form fit for sending in Emacs' {\tt message-mode}.
-
-\section{Customization within Emacs}
-
-You can use \kbd{M-x customize-variable RET} or the ``Preview\slash
-Customize'' menu for customization.  Worthwhile settings:
-
-\halign to \hsize{\tabskip=1ptplus1fil\relax#\hfil&\hfil\var{#}\tabskip0pt\cr
-\noalign{\medskip If you have dvipng available:}
-Set to \kbd{dvipng}&preview-image-type\cr
-\noalign{\medskip \vbox{Keep counter values when regenerating
-  single previews:}}
-Set to \kbd{t}&preview-preserve-counters\cr
-\noalign{\medskip \vbox{Cache/Don't cache preamble without query
-(preamble caching is done using \file{mylatex.ltx} and might not always
-work.  Use the appropriate key sequences for overriding the following
-setting):}}
-Set to \kbd{t}/\kbd{nil}&preview-auto-cache-preamble\cr}
-
-\section{Customization from \LaTeX{}}
-Customization is done in the document preamble (you need to load
-\file{preview.sty} explicitly) or in \file{prauctex.cfg} (which should
-load the system \file{prauctex.cfg} first).  Commands:
-
-\halign to \hsize{\tabskip=1ptplus1fil\relax#\hfil&\hfil\kbd{#}\tabskip0pt\cr
-Preview macro&\string\PreviewMacro[\{\<args>\}]\{\<macro>\}\cr
-Preview env&\string\PreviewEnvironment[\{\<args>\}]\{\<env>\}\cr
-Skip macro&\string\PreviewMacro*[\{\<args>\}]\{\<macro>\}\cr
-Skip env&\string\PreviewEnvironment*[\{\<args>\}]\{\<env>\}\cr
-\noalign{\smallskip Diverting material from float environments}
-Snarf stuff&\string\PreviewSnarfEnvironment[\{\<args>\}]\{\<env>\}\cr
-}
-
-Values to be used within \<args>:
-\halign to
-\hsize{\tabskip=1ptplus1fil\relax#\hfil&\hfil\kbd{#}\tabskip0pt\cr
-Optional argument&[]\cr
-Mandatory argument&\{\}\cr
-Optional star&*\cr
-Conditionals&?\<token>\{\<if found>\}\{\<if not found>\}\cr
-Skip next token&-\cr
-Transformation&\#\{\<macro args>\}\{\<replacement>\}\cr
-}
-
-More options and explanations can be found in \file{preview.pdf} or the
-Texinfo manual.
-
-\vskip 5ex plus 6ex minus 1ex
-
-\title{Folding Source Display}
-
-\key{Toggle folding mode}{C-c C-o C-f}
-\key{Hide all items in buffer}{C-c C-o C-b}
-\key{Hide all items in region}{C-c C-o C-r}
-\key{Hide all items in paragraph}{C-c C-o C-p}
-\key{Hide current macro}{C-c C-o C-m}
-\key{Hide current environment}{C-c C-o C-e}
-\key{Show all items in buffer}{C-c C-o b}
-\key{Show all items in region}{C-c C-o r}
-\key{Show all items in paragraph}{C-c C-o p}
-\key{Show current item}{C-c C-o i}
-\key{Hide or show current item}{C-c C-o C-o}
-
-\vskip 5ex plus 6ex minus 1ex
-
-\title{Outlining \TeX\ Documents}
-
-AUC\TeX\ supports outline mode by defining section, subsection,
-etc. as heading levels. You can use \kbd{M-x outline-minor-mode RET}
-to toggle outline minor mode. All outline minor mode commands are
-under the prefix key specified by \var{outline-minor-mode-prefix}, default
-is \kbd{C-c @}.
-
-\key{Hide all of buffer except headings}{C-c @ C-t}
-\key{Show all text in buffer}{C-c @ C-a}
-\key{Hide body following this heading}{C-c @ C-c}
-\key{Show body following this heading}{C-c @ C-e}
-\key{Hide subtree}{C-c @ C-d}
-\key{Show subtree}{C-c @ C-s}
-\key{All subheadings visible}{C-c @ C-k}
-
-\key{next visible heading}{C-c @ C-n}
-\key{previous visible heading}{C-c @ C-p}
-\key{forward to next subheading}{C-c @ C-f}
-\key{backward to next subheading}{C-c @ C-b}
-\key{up one heading level}{C-c @ C-u}
-
-\newcolumn
-
-\iftrue % RefTeX long version
-
-\title{RefTeX}
-
-\section{Activation}
-
-RefTeX is part of Emacs.  To activate and make it interact with
-AUCTeX, insert the following lines in \file{init.el}.
-\vskip-3mm
-\beginexample
-(add-hook 'LaTeX-mode-hook \#'turn-on-reftex)
-(setq reftex-plug-into-AUCTeX t)
-\endexample
-
-\section{Table of Contents}
-The table of contents is a structured view of the entire document.  It
-contains the sections, and optionally labels, index entries, and file
-boundaries.
-
-\key{Show the table of contents$\sp1$}{C-c =}
-\key{Recenter *toc* buffer to here$\sp1$}{C-c -}
-
-\section{Crossreferences, Citations, Index}
-
-\key{Insert unique label$\sp1$}{C-c (}
-\key{Reference a label$\sp1$}{C-c )}
-\key{Insert citation with key selection}{C-c [}
-\key{\dots\ prompt for optional arguments}{C-u C-c [}
-\key{Index  word at point with default macro}{C-c /}
-\key{Insert an index entry}{C-c <}
-\key{Add word to index phrases}{C-c \\}
-\key{Visit index phrases buffer}{C-c |}
-\key{Compile and display index}{C-c >}
-\key{View cross reference$\sp1$}{C-c \&}
-\key{View cross reference with mouse}{S-mouse-2}
-\key{View cross reference from BibTeX file}{C-c \&}
-
-\section{Standard keys in special buffers}
-RefTeX's special buffers have many active keys.  The common ones are:
-
-\key{Display summary of active keys}{?}
-\key{Select this item}{RET}
-\key{Rescan the document}{r}
-\key{Display location in other window}{SPC}
-\key{Follow mode}{f}
-
-\section{Multifile actions}
-Since RefTeX scans the entire (multifile) document, it can provide
-commands that act on all files of a document.  Check the \kbd{
-Ref->Global Actions} menu for these commands.
-
-\section{Variables}
-
-To tell reftex about your own macro definitions, customize the
-variables
-\vskip-3mm
-\beginexample
-reftex-label-alist
-reftex-section-levels
-reftex-index-macros
-reftex-cite-format
-\endexample
-
-\vskip2mm\hrule
-$\sp1$ An argument of \kbd{C-u} triggers a document scan first.  This can
-be necessary if file content and RefTeX's knowledge are no longer
-consistent.
-
-\else % RefTeX compact version
-
-\csname title\endcsname{RefTeX}
-
-\section{Activation in init.el}
-
-\vskip-4mm
-\beginexample
-(add-hook 'LaTeX-mode-hook \#'turn-on-reftex)
-(setq reftex-plug-into-AUCTeX t)
-\endexample
-
-\section{Table of Contents}
-
-\key{Show the table of contents$\sp1$}{C-c =}
-\key{Recenter *toc* buffer to here$\sp1$}{C-c -}
-
-\section{Crossreferences, Citations, Index}
-
-\key{Insert unique label$\sp1$}{C-c (}
-\key{Reference a label$\sp1$}{C-c )}
-\key{Insert citation with key selection}{C-c [}
-\key{... prompt for optional arguments}{C-u C-c [}
-\key{Index  word at point with default macro}{C-c /}
-\key{Insert an index entry}{C-c <}
-\key{Add word to index phrases}{C-c \\}
-\key{Visit index phrases buffer}{C-c |}
-\key{Compile and display index}{C-c >}
-\key{View cross reference$\sp1$}{C-c \&}
-\key{View cross reference with mouse}{S-mouse-2}
-\key{View cross reference from BibTeX file}{C-c \&}
-
-\vskip2mm\hrule
-$\sp1$ An argument of \kbd{C-u} triggers a document scan first.
-
-\fi
-
-\bye
-
-%%% Local Variables:
-%%% mode: plain-TeX
-%%% TeX-master: t
-%%% End: